Unable to configure networking with config.yaml

[mperry2]

I'm unable to config networking with config.yaml. I have the following in /var/lib/rancher/k3os/config.yaml

hostname: testk3os
k3os: {}
sshAuthorizedKeys:
  - github:mperry2
write_files:
  - path: /var/lib/connman/default.config
    content: |-
      [service_eth0]
      Name = eth0
      DeviceName = eth0
      IPv4 = 192.168.10.90/255.255.255.0/192.168.10.1
      IPv6 = off
      Nameservers = 192.168.10.1

After I reboot I can see that /var/lib/connman/default.config is created with the expected content. However, the OS is still using DHCP and not the new IP address. Also, the directory /var/lib/connman/ethernet_000c296a3b34_cable appears even if I delete it and reboot, it will reappear when the system boots again.

Any suggestions on how to get the network configuration in default.config to work?

[mperry2]

I was able to get it to work after adding Type=ethernet to the service definition. For example:

[service_eth0]
Type=ethernet
Name = eth0
DeviceName = eth0
IPv4 = 192.168.10.90/255.255.255.0/192.168.10.1
IPv6 = off
Nameservers = 192.168.10.1