rds on RDA5807_07_NANO_OLED_V2.ino #12
Comments
|
Please, check the folder https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_03_ATTINY_84_85 This folder has 10 examples that can help you to use OLED in your project. They are aimed at ATTiny84/85. However, you can adapt them to your favorite microcontroller. There are no big differences if compared to RDA5807_07_NANO_OLED_V2.ino but they implement RDS. In my free time I will try improve the RDA5807_07_NANO_OLED_V2.ino. |
|
Now the RDA5807_07_NANO_OLED_V2 is updated. |
|
Good morning Ricardo.
I must apologize for my late replies because at this moment I am on summer
vacation out of my country. I have limited internet access so just couldn't
reply to you.
I am back in a couple of days and for sure will check changes and reply to
you.
Thank you very much for your understanding and help about this project.
Stay well and 73.
Regards
Petrika
Z34PEC
…On Sat, Aug 12, 2023, 22:18 Ricardo Lima Caratti ***@***.***> wrote:
Now the RDA5807_07_NANO_OLED_V2 is updated.
See this video: https://youtu.be/6JvodLKfn28
See the latest version:
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/A7YG4R5FJB2XDPCDJ7HKTHDXU7JHZANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
I got error: Compilation error: 'class RDA5807' has no member named 'getMute'; did you mean 'setMute'? |
|
You need to install the latest version of the library.
I forgot that. Let me update the latest release on the Arduino Platform
server.
This way, your Arduino IDE will do that for you. It will tell you that a
new version is available.
Wait for some hours, update your installed libraries and try it again.
73.
Ricardo.
PU2CLR.
…On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
https://youtu.be/6JvodLKfn28 See the latest version:
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
I got error: Compilation error: 'class RDA5807' has no member named
'getMute'; did you mean 'setMute'?
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
|
|
Good morning.
Now everything is ok after update of library.
I notice that receive of rds signal is "strange" because it did not display
proper rds info. I was wondering if there is rds standard for this
information and maybe it is different in your country and mine (Brazil and
EU rules for transmitting of rds information).
Regards
Petrika
On Wed, Aug 16, 2023, 00:43 Ricardo Lima Caratti ***@***.***>
wrote:
… You need to install the latest version of the library.
I forgot that. Let me update the latest release on the Arduino Platform
server.
This way, your Arduino IDE will do that for you. It will tell you that a
new version is available.
Wait for some hours, update your installed libraries and try it again.
73.
Ricardo.
PU2CLR.
On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
> Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
> https://youtu.be/6JvodLKfn28 See the latest version:
>
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
>
> I got error: Compilation error: 'class RDA5807' has no member named
> 'getMute'; did you mean 'setMute'?
>
> —
> Reply to this email directly, view it on GitHub
> <#12 (comment)>,
or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/A7YG4R5XP7DXKWWPOHURHNLXVP3RPANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Can you give me details about the RDS/RBDS service provided by the stations
in your area?
I know there are two types: RDS and RBDS. The decode processes are a bit
different. I’m using the RDS here (same used In Europe).
But the station name and time should work. Can you show me a video with
your experiment ?
On Wed, 16 Aug 2023 at 00:43 z34pec ***@***.***> wrote:
Good morning.
Now everything is ok after update of library.
I notice that receive of rds signal is "strange" because it did not
display
proper rds info. I was wondering if there is rds standard for this
information and maybe it is different in your country and mine (Brazil and
EU rules for transmitting of rds information).
Regards
Petrika
On Wed, Aug 16, 2023, 00:43 Ricardo Lima Caratti ***@***.***>
wrote:
> You need to install the latest version of the library.
> I forgot that. Let me update the latest release on the Arduino Platform
> server.
> This way, your Arduino IDE will do that for you. It will tell you that a
> new version is available.
> Wait for some hours, update your installed libraries and try it again.
> 73.
> Ricardo.
> PU2CLR.
>
> On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
>
> > Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
> > https://youtu.be/6JvodLKfn28 See the latest version:
> >
>
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
> >
> > I got error: Compilation error: 'class RDA5807' has no member named
> > 'getMute'; did you mean 'setMute'?
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#12 (comment)>,
> or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
>
> --
>
> QRZ: http://www.qrz.com/db/PU2CLR
> Skype: ricardo_caratti
> Mobile: +55 61 981442296
>
> —
> Reply to this email directly, view it on GitHub
> <#12 (comment)>,
or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A7YG4R5XP7DXKWWPOHURHNLXVP3RPANCNFSM6AAAAAA2LQJQHQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAVSJNES52N4SYVWNU7A3D3XVQ6VRANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
|
|
Please, at line 146 (RDA5807_07_NANO_OLED_V2.ino) change rx.setRDS(true);
to rx.setRBDS(true);
Tell me if it solved the problem. If not, let me know. I will change some
code in the library to check it out again.
73.
PU2CLR.
…On Wed, Aug 16, 2023 at 12:43 AM z34pec ***@***.***> wrote:
Good morning.
Now everything is ok after update of library.
I notice that receive of rds signal is "strange" because it did not
display
proper rds info. I was wondering if there is rds standard for this
information and maybe it is different in your country and mine (Brazil and
EU rules for transmitting of rds information).
Regards
Petrika
On Wed, Aug 16, 2023, 00:43 Ricardo Lima Caratti ***@***.***>
wrote:
> You need to install the latest version of the library.
> I forgot that. Let me update the latest release on the Arduino Platform
> server.
> This way, your Arduino IDE will do that for you. It will tell you that a
> new version is available.
> Wait for some hours, update your installed libraries and try it again.
> 73.
> Ricardo.
> PU2CLR.
>
> On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
>
> > Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
> > https://youtu.be/6JvodLKfn28 See the latest version:
> >
>
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
> >
> > I got error: Compilation error: 'class RDA5807' has no member named
> > 'getMute'; did you mean 'setMute'?
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#12 (comment)>,
> or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
>
> --
>
> QRZ: http://www.qrz.com/db/PU2CLR
> Skype: ricardo_caratti
> Mobile: +55 61 981442296
>
> —
> Reply to this email directly, view it on GitHub
> <#12 (comment)>,
or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A7YG4R5XP7DXKWWPOHURHNLXVP3RPANCNFSM6AAAAAA2LQJQHQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAVSJNES52N4SYVWNU7A3D3XVQ6VRANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
|
|
Hi,
I am still at work.
I think I find the problem :)
It is in our radio's RDS emmiting protocol. Every radio has it's own way
how to emit RDS.
I try it across al radio band and there are couple of stations where rds is
OK.
So do not bother any more. It is our stations fault.
Regards,
Petrika
On Wed, Aug 16, 2023 at 1:44 PM Ricardo Lima Caratti <
***@***.***> wrote:
… Please, at line 146 (RDA5807_07_NANO_OLED_V2.ino) change rx.setRDS(true);
to rx.setRBDS(true);
Tell me if it solved the problem. If not, let me know. I will change some
code in the library to check it out again.
73.
PU2CLR.
On Wed, Aug 16, 2023 at 12:43 AM z34pec ***@***.***> wrote:
> Good morning.
> Now everything is ok after update of library.
> I notice that receive of rds signal is "strange" because it did not
> display
> proper rds info. I was wondering if there is rds standard for this
> information and maybe it is different in your country and mine (Brazil
and
> EU rules for transmitting of rds information).
> Regards
> Petrika
>
> On Wed, Aug 16, 2023, 00:43 Ricardo Lima Caratti ***@***.***>
> wrote:
>
> > You need to install the latest version of the library.
> > I forgot that. Let me update the latest release on the Arduino
Platform
> > server.
> > This way, your Arduino IDE will do that for you. It will tell you that
a
> > new version is available.
> > Wait for some hours, update your installed libraries and try it again.
> > 73.
> > Ricardo.
> > PU2CLR.
> >
> > On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
> >
> > > Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
> > > https://youtu.be/6JvodLKfn28 See the latest version:
> > >
> >
>
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
> > >
> > > I got error: Compilation error: 'class RDA5807' has no member named
> > > 'getMute'; did you mean 'setMute'?
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <#12 (comment)>,
>
> > or
> > > unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
>
> >
> > > .
> > > You are receiving this because you commented.Message ID:
> > > ***@***.***>
> > >
> >
> >
> > --
> >
> > QRZ: http://www.qrz.com/db/PU2CLR
> > Skype: ricardo_caratti
> > Mobile: +55 61 981442296
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#12 (comment)>,
> or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/A7YG4R5XP7DXKWWPOHURHNLXVP3RPANCNFSM6AAAAAA2LQJQHQ>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#12 (comment)>,
or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAVSJNES52N4SYVWNU7A3D3XVQ6VRANCNFSM6AAAAAA2LQJQHQ>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/A7YG4R3JNL4PL2QTEAVTDMDXVSXANANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Ok. Thanks for reporting this.
Anyway, I will find a way to check all possibilities of RDS and RBDS
broadcasting services.
73.
PU2CLR.
Ricardo.
…On Wed, Aug 16, 2023 at 11:59 AM z34pec ***@***.***> wrote:
Hi,
I am still at work.
I think I find the problem :)
It is in our radio's RDS emmiting protocol. Every radio has it's own way
how to emit RDS.
I try it across al radio band and there are couple of stations where rds
is
OK.
So do not bother any more. It is our stations fault.
Regards,
Petrika
On Wed, Aug 16, 2023 at 1:44 PM Ricardo Lima Caratti <
***@***.***> wrote:
> Please, at line 146 (RDA5807_07_NANO_OLED_V2.ino) change
rx.setRDS(true);
> to rx.setRBDS(true);
> Tell me if it solved the problem. If not, let me know. I will change
some
> code in the library to check it out again.
> 73.
> PU2CLR.
>
>
>
>
>
>
> On Wed, Aug 16, 2023 at 12:43 AM z34pec ***@***.***> wrote:
>
> > Good morning.
> > Now everything is ok after update of library.
> > I notice that receive of rds signal is "strange" because it did not
> > display
> > proper rds info. I was wondering if there is rds standard for this
> > information and maybe it is different in your country and mine (Brazil
> and
> > EU rules for transmitting of rds information).
> > Regards
> > Petrika
> >
> > On Wed, Aug 16, 2023, 00:43 Ricardo Lima Caratti ***@***.***>
> > wrote:
> >
> > > You need to install the latest version of the library.
> > > I forgot that. Let me update the latest release on the Arduino
> Platform
> > > server.
> > > This way, your Arduino IDE will do that for you. It will tell you
that
> a
> > > new version is available.
> > > Wait for some hours, update your installed libraries and try it
again.
> > > 73.
> > > Ricardo.
> > > PU2CLR.
> > >
> > > On Tue, Aug 15, 2023 at 6:49 PM z34pec ***@***.***> wrote:
> > >
> > > > Now the RDA5807_07_NANO_OLED_V2 is updated. See this video:
> > > > https://youtu.be/6JvodLKfn28 See the latest version:
> > > >
> > >
> >
>
https://github.com/pu2clr/RDA5807/tree/master/examples/RDA5807_07_NANO_OLED_V2
> > > >
> > > > I got error: Compilation error: 'class RDA5807' has no member
named
> > > > 'getMute'; did you mean 'setMute'?
> > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub
> > > > <
#12 (comment)>,
>
> >
> > > or
> > > > unsubscribe
> > > > <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AAVSJNDBYRTKNT6PMCTINJTXVPVIBANCNFSM6AAAAAA2LQJQHQ>
>
> >
> > >
> > > > .
> > > > You are receiving this because you commented.Message ID:
> > > > ***@***.***>
> > > >
> > >
> > >
> > > --
> > >
> > > QRZ: http://www.qrz.com/db/PU2CLR
> > > Skype: ricardo_caratti
> > > Mobile: +55 61 981442296
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <#12 (comment)>,
>
> > or
> > > unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/A7YG4R5XP7DXKWWPOHURHNLXVP3RPANCNFSM6AAAAAA2LQJQHQ>
>
> >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#12 (comment)>,
> or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAVSJNES52N4SYVWNU7A3D3XVQ6VRANCNFSM6AAAAAA2LQJQHQ>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
>
> --
>
> QRZ: http://www.qrz.com/db/PU2CLR
> Skype: ricardo_caratti
> Mobile: +55 61 981442296
>
> —
> Reply to this email directly, view it on GitHub
> <#12 (comment)>,
or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/A7YG4R3JNL4PL2QTEAVTDMDXVSXANANCNFSM6AAAAAA2LQJQHQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#12 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAVSJNHH4NPHNDCALUVNCIDXVTN55ANCNFSM6AAAAAA2LQJQHQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
--
QRZ: http://www.qrz.com/db/PU2CLR
Skype: ricardo_caratti
Mobile: +55 61 981442296
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello.
Is there a way to implement RDS on this ( RDA5807_07_NANO_OLED_V2.ino ) sketch ?
It us good to put it instead of pin7 - bass.
Thank you
The text was updated successfully, but these errors were encountered: