Requirements:

Raspberry Pi Pico or Pico W

Installation

Install Circuitpython

Download and copy the appropriate circuitpython file to the Raspberry Pi Pico (or pico W):

For Pico: https://circuitpython.org/board/raspberry_pi_pico/
For Pico W: https://circuitpython.org/board/raspberry_pi_pico_w/

The Pico will rename itself CIRCUITPI

Copy files

Copy files and folders from this repository onto the Raspberry Pi.
- Note Sources:
  - neopixel.mpy: https://circuitpython.org/libraries
  - ledPixelsPico.py: https://github.com/lurbano/ledPixelsPico
The Pico will run the code.py file by default.
- This program assumes you have a 30 pixel array (at GPIO15) and a touch sensor (at GPIO16).
- It will run a rainbow pattern that turns on and off when you touch the touch sensor.