| title | description | addedAt | pageClass |
|---|---|---|---|
Vimar 03981 control via MQTT |
Integrate your Vimar 03981 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. |
2022-07-31 12:30:23 UTC |
device-page |
| Model | 03981 |
| Vendor | Vimar |
| Description | IoT connected relay module |
| Exposes | switch (state), linkquality |
| Picture |  |
How to use device type specific configuration
state_action: State actions will also be published as 'action' when true (default false). The value must betrueorfalse
The current state of this switch is in the published state under the state property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.