Replies: 4 comments
-
Well if you look in the transcript, then you get these times of events: DOI: 101:36:14.07 (DOI PAD at 100:20:32) |
Beta Was this translation helpful? Give feedback.
-
Transcripts are a consequence of T1, T2 and T3, I am looking for the source of T1, T2 and T3: when should they be performed and why? |
Beta Was this translation helpful? Give feedback.
-
The flight plan has the PAD format: https://history.nasa.gov/afj/ap11fj/a11fp/a11-fp-2-040.jpg That's where they would write down the numbers, although they likely would have done that on the Lunar Surface Data Card in the LM Data Card Book. Why they should be perform? Well they are times to abort from the lunar surface, so they would have been performed if some issue had occured. T1 immediately after landing, T2 after a more thorough check of all the systems and T3 would be the first "normal" ascent, one orbit of the CSM after the LM has landed. |
Beta Was this translation helpful? Give feedback.
-
It's a total mess :-) |
Beta Was this translation helpful? Give feedback.
-
Can anybody help figuring out which were the T1, T2 and T3 times during descent and landing?
I did setup this page to study this topic, but everything is so confused!
https://jumpjack.github.io/Apollo11LEMdata/index-checklists.html
Beta Was this translation helpful? Give feedback.
All reactions