Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add special cluster attributes for Tuya TS130f cover switch #729

Open
FranzSchi opened this issue Jan 13, 2022 · 4 comments
Open

Add special cluster attributes for Tuya TS130f cover switch #729

FranzSchi opened this issue Jan 13, 2022 · 4 comments
Labels
device-specific

Comments

@FranzSchi
Copy link
Contributor

Guidelines

Delete this section in your issue...

Please add the special cluster attributes for Tuya TS130f cover switch (And Rollershutter) as it is discussed here to allow the calibratoin mode:

https://community.openhab.org/t/ts130f-rollershutter-controller-via-zigbee-binding/107687/5

Details should be specified here:
[[I added special Tuya attributes to cluster 'genOnOff' and 'closuresWindowCovering' for support of the Tuya TS130f RollerShutter switch. Discussed at Koenkk/zigbee2mqtt#4257](https://github.com/Koenkk/zigbee-herdsman/pull/240)](Koenkk/zigbee-herdsman#240)

openhab> zigbee endpoint 20561/1
IEEE Address      : A4C1382E683CB5F8
Network Address   : 20561
Endpoint          : 1
Device Profile    : 0x0104, ZIGBEE_HOME_AUTOMATION
Device Type       : 0x0202, WINDOW_COVERING_DEVICE
Device Version    : 1
Input Clusters    : (Server)
   0000 Basic
     - APS Security disabled
        S       0 r-- UNSIGNED_8_BIT_INTEGER    ZCL Version                              Fri Jan 07 12:29:57 CET 2022 3
        S       1 r-- UNSIGNED_8_BIT_INTEGER    Application Version                      Fri Jan 07 12:29:57 CET 2022 67
        S       2 r-- UNSIGNED_8_BIT_INTEGER    Stack Version                            Fri Jan 07 12:29:57 CET 2022 0
        S       3 r-- UNSIGNED_8_BIT_INTEGER    HW Version                               Fri Jan 07 12:29:57 CET 2022 1
        S       4 r-- CHARACTER_STRING          Manufacturer Name                        Fri Jan 07 12:29:57 CET 2022 _TZ3000_dbpmpco1
        S       5 r-- CHARACTER_STRING          Model Identifier                         Fri Jan 07 12:29:57 CET 2022 TS130F
        S       6 r-- CHARACTER_STRING          Date Code                                Fri Jan 07 12:29:57 CET 2022
        S       7 r-- ENUMERATION_8_BIT         Power Source                             Fri Jan 07 18:44:18 CET 2022 1
        S       8 r-- ENUMERATION_8_BIT         Generic Device Class
        S       9 r-- ENUMERATION_8_BIT         Generic Device Type
        S      10 r-- CHARACTER_STRING          Product Code
        S      11 r-- CHARACTER_STRING          Product URL
        S      16 rw- CHARACTER_STRING          Location Description
        S      17 rw- ENUMERATION_8_BIT         Physical Environment
        S      18 rw- BOOLEAN                   Device Enabled
        S      19 rw- BITMAP_8_BIT              Alarm Mask
        S      20 rw- BITMAP_8_BIT              Disable Local Config
        S   16384 r-- CHARACTER_STRING          SW Build ID
   0004 Groups
     - APS Security disabled
        S       0 r-- BITMAP_8_BIT              Name Support
   0005 Scenes
     - APS Security disabled
        S       0 r-- UNSIGNED_8_BIT_INTEGER    Scene Count
        S       1 r-- UNSIGNED_8_BIT_INTEGER    Current Scene
        S       2 r-- UNSIGNED_16_BIT_INTEGER   Current Group
        S       3 r-- BOOLEAN                   Scene Valid
        S       4 r-- BITMAP_8_BIT              Name Support
        S       5 r-- IEEE_ADDRESS              Last Configured By
   0006 On/Off
     - APS Security disabled
        U       0 r-s BOOLEAN                   On Off
        U   16384 r-- BOOLEAN                   Global Scene Control
        S   16385 rw- UNSIGNED_16_BIT_INTEGER   On Time
        S   16386 rw- UNSIGNED_16_BIT_INTEGER   Off Wait Time
        U   16387 rw- ENUMERATION_8_BIT         Start Up On Off
   0102 Window Covering
     - APS Security disabled
        S       0 r-- ENUMERATION_8_BIT         Window Covering Type
        S       1 r-- UNSIGNED_16_BIT_INTEGER   Physical Closed Limit - Lift
        S       2 r-- UNSIGNED_16_BIT_INTEGER   Physical Closed Limit - Tilt
        S       3 r-- UNSIGNED_16_BIT_INTEGER   Current Position - Lift
        S       4 r-- UNSIGNED_16_BIT_INTEGER   Current Position - Tilt
        S       5 r-- UNSIGNED_16_BIT_INTEGER   Number Of Actuations - Lift
        S       6 r-- UNSIGNED_16_BIT_INTEGER   Number Of Actuations - Tilt
        S       7 r-- BITMAP_8_BIT              Config Status
        S       8 r-- UNSIGNED_8_BIT_INTEGER    Current Position Lift Percentage         Fri Jan 07 19:17:53 CET 2022 100
        S       9 r-- UNSIGNED_8_BIT_INTEGER    Current Position Tilt Percentage
        S      16 r-- UNSIGNED_16_BIT_INTEGER   Installed Open Limit - Lift
        S      17 r-- UNSIGNED_16_BIT_INTEGER   Installed Closed Limit - Lift
        S      18 r-- UNSIGNED_16_BIT_INTEGER   Installed Open Limit - Tilt
        S      19 r-- UNSIGNED_16_BIT_INTEGER   Installed Closed Limit - Tilt
        S      20 rws UNSIGNED_16_BIT_INTEGER   Velocity - Lift
        S      21 rws UNSIGNED_16_BIT_INTEGER   Acceleration Time - Lift
        S      22 rws UNSIGNED_16_BIT_INTEGER   Deceleration Time - Lift
        S      23 rws BITMAP_8_BIT              Mode
        S      24 rws OCTET_STRING              Intermediate Setpoints - Lift
        S      25 rws OCTET_STRING              Intermediate Setpoints - Tilt
Output Clusters   : (Client)
   000A Time
     - APS Security disabled
   0019 Ota Upgrade
     - APS Security disabled
        S       0 r-- IEEE_ADDRESS              Upgrade Server ID
        S       1 r-- UNSIGNED_32_BIT_INTEGER   File Offset
        S       2 r-- UNSIGNED_32_BIT_INTEGER   Current File Version                     Fri Jan 07 12:29:57 CET 2022 67
        S       3 r-- UNSIGNED_16_BIT_INTEGER   Current ZigBee Stack Version
        S       4 r-- UNSIGNED_32_BIT_INTEGER   Downloaded File Version
        S       5 r-- UNSIGNED_16_BIT_INTEGER   Downloaded ZigBee Stack Version
        S       6 r-- ENUMERATION_8_BIT         Image Upgrade Status
        S       7 r-- UNSIGNED_16_BIT_INTEGER   Manufacturer ID
        S       8 r-- UNSIGNED_16_BIT_INTEGER   Image Type ID
        S       9 r-- UNSIGNED_16_BIT_INTEGER   Minimum Block Request Period
        S      10 r-- UNSIGNED_32_BIT_INTEGER   Image Stamp
Groups Supported  : 32
Groups Configured : 0

Outline

We are not able to run the calibration mode.
image

Configuration

Ember Coordinator

Logs

Here is the XML of the device detection
A4C1382E683CB5F8.zip
@openhab-bot
Copy link
Collaborator

This issue has been mentioned on openHAB Community. There might be relevant details there:

https://community.openhab.org/t/ts130f-rollershutter-controller-via-zigbee-binding/107687/8

@cdjackson
Copy link
Contributor

Please can you define the attributes required to be supported.

@FranzSchi
Copy link
Contributor Author

Hi Chris,

thanks for your fast reply, I really appreciate that.

I guess we need this properties:

		tuyaMovingState: { ID: 0xf000, type: dataType_1.default.enum8 }, - Not so critical
		tuyaCalibration: { ID: 0xf001, type: dataType_1.default.enum8 }, - very much needed
		tuyaMotorReversal: { ID: 0xf002, type: dataType_1.default.enum8 },     - would be nice

Cluster | CMD | Attributes | Data Type | Value | Description

(0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 1 (0x01) | Motor reversal on
(0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 0 (0x00) | Motor reversal off
(0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 0 (0x00) | Start Calibration
(0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 1 (0x01) | End Calibration
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 0 (0x00) | Light Mode 1
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 1 (0x01) | Light Mode 2
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 2 (0x02) | Light Mode 3

(0x0102) | Command (0x00) | | | | open
(0x0102) | Command (0x01) | | | | close
(0x0102) | Command (0x02) | | | | stopp

(0x0102) | Report Attributes (0x0a) | 0x0008 | 8-Bit (0x20) | 0 (0x00) | Position 0%
(0x0102) | Report Attributes (0x0a) | 0x0008 | 8-Bit (0x20) | 100 (0x64) | Position 100%
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 0 (0x00) | Moving up
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 1 (0x01) | Stopp
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 2 (0x02) | Moving down

May Greetings
/Franz

@FranzSchi
Copy link
Contributor Author

Hi,

just as an info for the others, I've just calibrated my RollerShutter.
Replace "20561/1" with your node ID

Start Calibration:
openhab> zigbee write 20561/1 258 61441 0 ENUMERATION_8_BIT
Attribute value write success.

End Calibration:
openhab> zigbee write 20561/1 258 61441 1 ENUMERATION_8_BIT
Attribute value write success.

Follow this Procedure:
https://www.zigbee2mqtt.io/devices/TS130F.html

BR
/Franz

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
device-specific
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@cdjackson @openhab-bot @FranzSchi