todos.md

todos

slicer

• add to ps: PRINT_START SIZE={first_layer_print_min[0]}_{first_layer_print_min[1]}_{first_layer_print_max[0]}_{first_layer_print_max[1]}
• check clean_nozzle config

calibration

• fine tune https://github.com/AndrewEllis93/Print-Tuning-Guide#pressure-advance
• fine tune https://github.com/AndrewEllis93/Print-Tuning-Guide#determining-maximum-speeds-and-accelerations
• fine tune https://github.com/AndrewEllis93/Print-Tuning-Guide#determining-maximum-volumetric-flow-rate

nice-to-have

• add and configure https://github.com/julianschill/klipper-led_effect
• add a macro to keep track of how long the nevermore filter cartridge was in use since last change

hardware

• add "decontaminator" bucket + brush
• add an improved spool holder (no PTFE tubing please)