Release 7.8 (#2083)

Author: jvanderaa

docs/admin/release_notes/version_7.8.md

@@ -0,0 +1,102 @@
+## What's Changed
+
+* Update hp_comware_display_interface.textfsm by @juliencorsini in https://github.com/networktocode/ntc-templates/pull/1963
+* Support Nexus 7k interface transceiver output again by @mjbear in https://github.com/networktocode/ntc-templates/pull/2018
+* Hp comware display ip interface update by @CursedEnvy in https://github.com/networktocode/ntc-templates/pull/2014
+* fixes error with CLNS in Cisco IOS 'show vlans' by @Kircheneer in https://github.com/networktocode/ntc-templates/pull/2006
+* New template Linux: `qm config 1` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2005
+* New template linux: `vzlist` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2000
+* Add hp_comware_display_bgp_peer_ipv4 by @CursedEnvy in https://github.com/networktocode/ntc-templates/pull/2020
+* Add new template for Fsas Si-R `show ip route` by @caribouHY in https://github.com/networktocode/ntc-templates/pull/1973
+* New template Linux: `dmidecode -t processor` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1996
+* New template for Linux: `qm list` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2004
+* New template linux: `pveversion` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2003
+* New template Linux: `pct config 0` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2002
+* New template Linux: `pct list` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2001
+* New template Linux: `dmidecode -t memory` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1999
+* Adding new template for Huawei SmartAX: `display ont wlan-status 0 1` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1992
+* New template for Linux: `dmidecode -t system` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1998
+* Updating Linux template: `ip route show` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1995
+* Update template: fortinet_get_system_interface.textfsm by @yone2ks in https://github.com/networktocode/ntc-templates/pull/2024
+* Replace ubuntu-20.04 with 22.04 in ci.yml by @mjbear in https://github.com/networktocode/ntc-templates/pull/2023
+* Update template: fortinet_get_system_status.textfsm by @yone2ks in https://github.com/networktocode/ntc-templates/pull/2022
+* New template Linux: `dmidecode -t bios` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1997
+* Adding new template for Huawei SmartAX: `display ont capability all` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1991
+* Adding new template for Huawei SmartAX: `display ont version summary 0` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1990
+* Improving template (I got an error due to a whitespace) by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1986
+* Fixing bug related to Huawei SmartAX template description by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1985
+* fix: alcatel_sros_show_lag_port by @ppetilli in https://github.com/networktocode/ntc-templates/pull/2021
+* Adding template in Huawei SmartAX: display ont-lineprofile gpon all by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1988
+* Modified hp_comware_display_device_manuinfo.textfsm template to resolve multiple issues by @marcus-cain in https://github.com/networktocode/ntc-templates/pull/2026
+* fix: It seems all templates are based upon hp comware switches by @CursedEnvy in https://github.com/networktocode/ntc-templates/pull/2011
+* Hp comware display interface fix by @CursedEnvy in https://github.com/networktocode/ntc-templates/pull/2007
+* Enhancing support for Huawei SmartAX: `display ont info summary ont` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2027
+* Enhancing template for Huawei SmartAX: `display service-port all` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2028
+* Enhancing template for Huawei VRP: `display interface` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2029
+* Adding new template for Huawei ONT: `display epon ont info` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2062
+* Adding new template for Huawei ONT: `display inner version` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2060
+* Adding new template for Huawei ONT: `display log info` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2058
+* Adding new template for Huawei ONT: `display macaddress` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2057
+* fix: parsing for cisco ios interface by @gertzakis in https://github.com/networktocode/ntc-templates/pull/2052
+* Update template: fortinet_get_system_interface_physical by @yone2ks in https://github.com/networktocode/ntc-templates/pull/2033
+* New template for Huawei ONT: `display memory info` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2055
+* Adding new template for Huawei ONT: `display optic` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2054
+* Support FEC in Fortinet 7.4 get system interface physical by @mjbear in https://github.com/networktocode/ntc-templates/pull/2036
+* Adding new template for Huawei ONT: `display wifi information` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2066
+* Adding new template for Huawei SmartAX: `display ont wan-info 0/1 2 0` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2065
+* New template for Huawei ONT: `display port statistics portid 1` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2051
+* Adding new template for Huawei ONT: `display pppoe_em result` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2049
+* Update doc versions to fix docs working by @itdependsnetworks in https://github.com/networktocode/ntc-templates/pull/2034
+* Adding new template for Huawei ONT: `display rf config` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2047
+* Add new template for Fsas Si-R `show vlan` by @caribouHY in https://github.com/networktocode/ntc-templates/pull/2031
+* Support object name for ASA vpn sess db session IP address by @mjbear in https://github.com/networktocode/ntc-templates/pull/2030
+* Add additional nonmatching line to EOS show ip mroute vrf all detail template by @brandomando in https://github.com/networktocode/ntc-templates/pull/2035
+* Fixes poetry in CI. by @jvanderaa in https://github.com/networktocode/ntc-templates/pull/2073
+* Adding template for Huawei ONT: `display sn` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2046
+* Adds mjbear as codeowner. by @jvanderaa in https://github.com/networktocode/ntc-templates/pull/2074
+* Update cisco_ios_show_power_inline.textfsm by @paineta in https://github.com/networktocode/ntc-templates/pull/2068
+* New template for Huawei ONT: `display deviceInfo` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2039
+* added cisco ios power consumption templates by @siguroot in https://github.com/networktocode/ntc-templates/pull/2069
+* New template for Huawei ONT: `display wanmac` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2040
+* New template for Huawei ONT: `display version` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2041
+* Huawei_ont_display_boardItem by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2038
+* New template for Huawei ONT: `display timeout` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2042
+* Adding template for Huawei Smartax: `display ont wlan-info 0/1/2 0` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1989
+* Adding new template for Huawei SmartAX: `display location <mac>` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1994
+* adding new template for Huawei ONT: `display sysinfo` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2043
+* Adding new template for Huawei ONT: `display productmac` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2048
+* Adding template for Huawei ONT: `display swm state` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2044
+* Adding new template for Huawei ONT: `display swm bootstate` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2045
+* Adding new template for Huawei ONT: `display flashlock status` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2061
+* Juniper junos show system processes brief by @jnicholson56 in https://github.com/networktocode/ntc-templates/pull/1974
+* Update hp_comware_display_interface_brief.textfsm by @juliencorsini in https://github.com/networktocode/ntc-templates/pull/1964
+* Regenerate all hp comware disp int br test data by @mjbear in https://github.com/networktocode/ntc-templates/pull/2076
+* Adding new template for Huawei ONT: `display optmode` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2053
+* Adding new template for Huawei ONT: `display machineItem` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2056
+* Add new template for Aruba OS: show vlan by @giacomotontini in https://github.com/networktocode/ntc-templates/pull/2075
+* Update cisco_nxos_show_nve_vni.textfsm by @julien-lebreton in https://github.com/networktocode/ntc-templates/pull/2067
+* Modify cisco_asa_show_route template to include VPN routes by @wollmannbruno in https://github.com/networktocode/ntc-templates/pull/1977
+* Add template for Aruba OS: `show version` by @giacomotontini in https://github.com/networktocode/ntc-templates/pull/2079
+* Create cisco_asa_show_running-config_object-group_service  by @wollmannbruno in https://github.com/networktocode/ntc-templates/pull/1976
+* Modify cisco_asa_show_access-list to include more capture groups by @wollmannbruno in https://github.com/networktocode/ntc-templates/pull/1981
+* Adding new template for Huawei ONT: `display lanmac` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2059
+* fix(zyxel): Corrected sys_atsh template with new header by @k-ribot in https://github.com/networktocode/ntc-templates/pull/2078
+* Updated TextFSM parser for  “show interfaces status” on Arista devices. by @michalis1 in https://github.com/networktocode/ntc-templates/pull/2080
+* Adding new template for Huawei SmartAX: `display location <mac> ont` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/1993
+* Adding new template for Huawei ONT: `display portstatistics portnum 0` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2050
+* Improving template for Huawei SmartAX: display_ont_wlan-status_0_1 by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2070
+* Improving template for Huawei VRP: `display lldp neighbor` by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2063
+* Update Alcatel AOS: show port-security by @evilmonkey19 in https://github.com/networktocode/ntc-templates/pull/2082
+
+## New Contributors
+
+* @juliencorsini made their first contribution in https://github.com/networktocode/ntc-templates/pull/1963
+* @CursedEnvy made their first contribution in https://github.com/networktocode/ntc-templates/pull/2014
+* @ppetilli made their first contribution in https://github.com/networktocode/ntc-templates/pull/2021
+* @paineta made their first contribution in https://github.com/networktocode/ntc-templates/pull/2068
+* @siguroot made their first contribution in https://github.com/networktocode/ntc-templates/pull/2069
+* @giacomotontini made their first contribution in https://github.com/networktocode/ntc-templates/pull/2075
+* @julien-lebreton made their first contribution in https://github.com/networktocode/ntc-templates/pull/2067
+* @michalis1 made their first contribution in https://github.com/networktocode/ntc-templates/pull/2080
+
+**Full Changelog**: https://github.com/networktocode/ntc-templates/compare/v7.7.0...v7.8.0

pyproject.toml

@@ -1,6 +1,6 @@
 [tool.poetry]
 name = "ntc_templates"
-version = "7.7.0"
+version = "7.8.0"
 description = "TextFSM Templates for Network Devices, and Python wrapper for TextFSM's CliTable."
 authors = ["Network to Code <[email protected]>"]
 license = "Apache-2.0"