Almost there

This is an interim release after we made an internal RC11 release which was supposed to become our first RTM release of the 2.2.x series.

On top of RC11, this release adds password_command parameter which works like RESTIC_PASSWORD_COMMAND environment variable, while encrypting the command in the config file.

From now on, all RC and RTM releases will have Microsoft Authenticode signed executables.

Let's upgrade - more prebuilts

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

New: This release also provides linux pre-built executables for AMD64 (glibc >=2.17), arm and arm64 (glibb >= 2.24).

Note: These releases are not signed with an EV certificate yet. Your antivirus software might not be happy.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos
• Highly optimize tree window creation times (x3.5) by replacing dateutil.parser.parse()
• Add --gui-status parameter and more GUI related info
• Added messages when no tcl/tk exists in GUI mode
• Allow AES key rotation by keeping old key and updating config file to new key encryption
• Added --no-gui compile time parameter
• Added arm/arm64 support

Fixes

• Cosmetic fixes
• Fixup bogus restic command line when empty tag lines were given
• Added missing default value for ignoring cloud files in the example configuration
• Made sure npbackup can run when no tkinter is installed (headless)
• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail
• Fix upgrade server missing port in config file would prevent default port usage
• Fix empty tag lines did create bogus restic commands
• Fix upgrade client was using OS arch instead of python arch preventing old builds with Python 3.7 x86 to properly update
• Fix missing locale might fail on certain linux builds
• Don't build NPBackupInstaller on non Windows platforms
• Make translation manager more resilient
• Make sure backend binary is always executable in Linux nuitka builds

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config
• Switch to maintained version of python-i18n at https://github.com/Krutyi-4el/i18nice
• upgrade server now identifies npbackup version in current_version call

Let's upgrade - prebuilts

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

New: This release also provides linux pre-built executables (glibc >=2.17)

Note: These releases are not signed with an EV certificate yet. Your antivirus software might not be happy.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos
• Highly optimize tree window creation times (x3.5) by replacing dateutil.parser.parse()
• Add --gui-status parameter and more GUI related info
• Added messages when no tcl/tk exists in GUI mode
• Allow AES key rotation by keeping old key and updating config file to new key encryption

Fixes

• Cosmetic fixes
• Fixup bogus restic command line when empty tag lines were given
• Added missing default value for ignoring cloud files in the example configuration
• Made sure npbackup can run when no tkinter is installed (headless)
• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail
• Fix upgrade server missing port in config file would prevent default port usage
• Fix empty tag lines did create bogus restic commands
• Fix upgrade client was using OS arch instead of python arch preventing old builds with Python 3.7 x86 to properly update
• Fix missing locale might fail on certain linux builds
• Don't build NPBackupInstaller on non Windows platforms
• Make translation manager more resilient
• Make sure backend binary is always executable in Linux nuitka builds

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config
• Switch to maintained version of python-i18n at https://github.com/Krutyi-4el/i18nice
• upgrade server now identifies npbackup version in current_version call

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos
• Highly optimize tree window creation times (x3.5) by replacing dateutil.parser.parse()
• Add --gui-status parameter and more GUI related info

Fixes

• Cosmetic fixes
• Fixup bogus restic command line when empty tag lines were given
• Added missing default value for ignoring cloud files in the example configuration
• Made sure npbackup can run when no tkinter is installed (headless)
• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail
• Fix upgrade server missing port in config file would prevent default port usage
• Fix empty tag lines did create bogus restic commands
• Fix upgrade client was using OS arch instead of python arch preventing old builds with Python 3.7 x86 to properly update
• Fix missing locale might fail on certain linux builds
• Don't build NPBackupInstaller on non Windows platforms
• Make translation manager more resilient
• Add an inline copy of maintained python-i18n to deal with portability issues (see requirements.txt for more)

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config
• Switch to maintained version of python-i18n at https://github.com/Krutyi-4el/python-i18n
• upgrade server now identifies npbackup version in current_version call

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos

Fixes

• Cosmetic fixes
• Fixup bogus restic command line when empty tag lines were given
• Added missing default value for ignoring cloud files in the example configuration
• Made sure npbackup can run when no tkinter is installed (headless)
• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail
• Fix upgrade server missing port in config file would prevent default port usage
• Fix empty tag lines did create bogus restic commands
• Fix upgrade client was using OS arch instead of python arch preventing old builds with Python 3.7 x86 to properly update

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config
• Switch to maintained version of python-i18n at https://github.com/Krutyi-4el/python-i18n
• upgrade server now identifies npbackup version in current_version call

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos

Fixes

• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail
• Fix upgrade server missing port in config file would prevent default port usage
• Fix empty tag lines did create bogus restic commands
• Fix upgrade client was using OS arch instead of python arch preventing old builds with Python 3.7 x86 to properly update

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config
• Switch to maintained version of python-i18n at https://github.com/Krutyi-4el/python-i18n
• upgrade server now identifies npbackup version in current_version call

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos

Fixes

• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes
• Fix empty restic results will make prometheus metrics fail

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes
• Add gui popup when config cannot be saved
• Make repo connection messages more clear
• Remove default backup admin password from config

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.
Warning: This release breaks earlier config file compatibiliity. Next releases will keep config file compatibility unless technically required.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
  • Upgrade server now fetches the real client IP if behind a proxy
  • Upgrade server systemd service file example
  • Support for --config-file parameter in upgrade_server
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent
• Auto minimize console window when run in GUI mode to not distract end user
• Trigger GUI refresh after configuration changes
• Main program now loads directly after first time GUI setup
• A popup is now shown on non-readable repos

Fixes

• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized
• Various smaller fixes

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)
• Add variable substitution in configuration
• Add machine identification in configuration
• Add variable ${RANDOM}[n] to config file in order to distinguish non unique hostnames
• Make backup state and upgrade state messages more coherent

Fixes

• Fix config fails when restic password is an int
• Fix empty config files did not show a proper error message
• Fix various config file malformation will break execution
• Fix backup hangs when no restic password is given (restic asks for password in backgroud job)
• Fix error message in logs when repo is not initialized

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes

Let's upgrade

This release has a major new feature: Remote upgrade
Also put emphasis on better GUI experience.

Note: These releases are not signed with an EV certificate yet.

Features

• Added a full auto-upgrade solution:
  • Aupgrade client integrated into NPBackup, that can be called manually via --auto-upgrade or automatically run every n backups
  • Upgrade server which servers files and their metadata
• Added a gui to create a scheduled task under Windows
• Added a gui to configure backup admin password (was compile time setting before)
• Made windows cloud file filter optional (enabled by default)

Misc

• Improved setup.py to provide launch scripts for both Linux and Windows platforms
• Added default configuration settings
• Rewrite configuration gui into a tabbed gui
• Updated restic binary to restic 0.15.1 compiled with go1.19.5
• Changed backup interval unit from seconds to minutes