diff --git a/EXTRAS/reports/all b/EXTRAS/reports/all index 43e2e9558..8e9ffbb4d 100644 --- a/EXTRAS/reports/all +++ b/EXTRAS/reports/all @@ -278417,7 +278417,6 @@ foundry(1991) type=24 snTraps(0) type=24 foundry#(0) type=20 - snTraps(0) type=0 snTrapChasPwrSupply(1) type=21 snTrapLockedAddressViolation(2) type=21 snTrapOspfIfStateChange(3) type=0 @@ -278589,10 +278588,6 @@ snTrapLicenseExpires(189) type=21 snTrapLicenseExpired(190) type=21 snTrapUDLDCrcFailureDetected(191) type=21 - snTrapDot1agCfmRemoteMEPAgeOut(192) type=21 - snTrapDot1agCfmRemoteMEPUp(193) type=21 - snTrapDot1agCfmDomainCrossConnection(194) type=21 - snTrapDot1agCfmDuplicateMEPId(195) type=21 snTrapStackingStandbyElected(196) type=21 snTrapMacMoveThresholdRate(197) type=21 snTrapMacMoveIntervalHistory(198) type=21 @@ -278608,6 +278603,27 @@ snTrapLicenseNNLLDelete(208) type=21 snTrapStackingShowStackConnect(209) type=21 snTrapStackingStandByChangedStandalone(210) type=21 + snTrapBroadcastlimit(211) type=21 + snTrapMulticastlimit(212) type=21 + snTrapUnicastlimit(213) type=21 + snTrapPsuFanStateChange(214) type=21 + snTrapStackISSUSystemCompleted(215) type=21 + snTrapStackISSUSystemFailed(216) type=21 + snTrapStackISSUUnitCompleted(217) type=21 + snTrapStackISSUUnitFailed(218) type=21 + snTrapStackISSUSystemStart(219) type=21 + snTrapStackingIgnoreShutdownTemperatureThresholdEnabled(220) type=21 + snTrapStackingIgnoreShutdownTemperatureThresholdDisabled(221) type=21 + snTrapGlobalBattleShortModeEnabled(222) type=21 + snTrapGlobalBattleShortModeDisabled(223) type=21 + snTrapStackSAUOptionChange(224) type=21 + snTrapPMSProtectActivated(225) type=21 + snTrapPMSProtectDeactivated(226) type=21 + snTrapStackSAUOptionDeleted(227) type=21 + snTrapStackCloudManagerConnected(228) type=21 + snTrapStackCloudManagerDisconnected(229) type=21 + snTrapManager2FactorAuthenticationEnabled(230) type=21 + snTrapManager2FactorAuthenticationDisabled(231) type=21 snTrapChasFanOK(1000) type=21 snTrapTemperatureOK(1001) type=21 snTrapCAMOverflow(1002) type=21 @@ -278627,46 +278643,19 @@ snTrapXfpSfpNotFoundryOptics(1018) type=21 snTrapTMRecoverySlotReset(1019) type=21 snTrapTMEgressDataError(1020) type=21 - snTrapSFMLoggingRestart(1021) type=21 - snTrapNotEnoughFapLinks(1035) type=21 snTrapSFMLinkDown(1100) type=21 snTrapSFMLinkUp(1101) type=21 snTrapSFMAccessError(1102) type=21 - snTrapSFMStatusChange(1103) type=21 - snTrapLPFabricStatusChange(1104) type=21 - snTrapModuleNPLockupIndication(1105) type=21 - snTrapModuleNPLockupThresholdExceeded(1106) type=21 - snTrapSFMAutoTuneStart(1107) type=21 - snTrapSFMAutoTuneFails(1108) type=21 - snTrapSFMAutoTuneComplete(1109) type=21 - snTrapTMAutoTuneStart(1110) type=21 - snTrapTMAutoTuneFails(1111) type=21 - snTrapTMAutoTuneComplete(1112) type=21 - snTrapNPILKNCRCError(1113) type=21 - snTrapARPMACMovement(1114) type=21 snTrapChassisFanSpeedLow(1200) type=21 snTrapChassisFanSpeedMedium(1201) type=21 snTrapChassisFanSpeedMedHigh(1202) type=21 snTrapChassisFanSpeedHigh(1203) type=21 - fdryTrapLagDeployed(1204) type=21 - fdryTrapLagUndeployed(1205) type=21 snTrapFIPSModeEnable(1207) type=21 snTrapFIPSModeDisable(1208) type=21 snTrapFIPSHostZeroized(1209) type=21 snTrapFIPSSharedSecretZeroized(1210) type=21 snTrapFIPSPOSTStatus(1211) type=21 snTrapFIPSCryptoModuleFailure(1212) type=21 - snTrapLicense2PortNotSupported(1213) type=21 - snTrapOpticalMonitoringOK(1214) type=21 - snTrapSFMAccessOK(1215) type=21 - snTrapUpgradeSingleCmdStart(1216) type=21 - snTrapUpgradeSingleCmdDone(1217) type=21 - snTrapAutoUpgradeStart(1218) type=21 - snTrapAutoUpgradeDone(1219) type=21 - snTrapTcamParityError(1220) type=21 - snTrapLPResetOnTcamError(1221) type=21 - snTrapSTPRootGuardViolation(1230) type=21 - snTrapRSTPRootGuardViolation(1231) type=21 products(1) type=0 switch(1) type=0 snChassis(1) type=0 @@ -278697,9 +278686,7 @@ snChasNumSlots(24) type=16 snChasArchitectureType(25) type=3 snChasProductType(26) type=3 - snChasSystemMode(27) type=3 - snChasFactoryPartNumber(28) type=2 - snChasFactorySerialNumber(29) type=2 + snChasGlobalIgnoreShutdownTemperature(30) type=3 snChasPwr(2) type=0 snChasPwrSupplyTable(1) type=0 snChasPwrSupplyEntry(1) type=0 @@ -278734,6 +278721,8 @@ snChasUnitWarningTemperature(5) type=3 snChasUnitShutdownTemperature(6) type=3 snChasUnitPartNum(7) type=2 + snChasUnitIgnoreShutdownTemperature(8) type=3 + snChasUnitFanless(9) type=3 snAgentSys(2) type=0 snAgentGbl(1) type=0 snAgReload(1) type=3 @@ -278770,7 +278759,7 @@ snAgGblExcessiveErrorWarning(34) type=3 snAgGblCpuUtilData(35) type=7 snAgGblCpuUtilCollect(36) type=3 - snAgGblTelnetTimeout(37) type=16 + snAgGblTelnetTimeout(37) type=3 snAgGblEnableWebMgmt(38) type=3 snAgGblSecurityLevelBinding(39) type=16 snAgGblEnableSLB(40) type=3 @@ -278787,21 +278776,26 @@ snAgGblCpuUtil5SecAvg(51) type=7 snAgGblCpuUtil1MinAvg(52) type=7 snAgGblDynMemUtil(53) type=7 - snAgGblDynMemTotal(54) type=16 + snAgGblDynMemTotal(54) type=7 snAgGblDynMemFree(55) type=7 snAgImgLoadSPModuleType(56) type=3 snAgImgLoadSPModuleNumber(57) type=16 snAgTrapHoldTime(58) type=3 snAgSFlowSourceInterface(59) type=16 hint=d - snAgGblTelnetLoginTimeout(60) type=16 + snAgGblTelnetLoginTimeout(60) type=3 snAgGblBannerExec(61) type=2 snAgGblBannerIncoming(62) type=2 snAgGblBannerMotd(63) type=2 snAgWebMgmtServerTcpPort(64) type=3 snAgTftpServerAddrType(65) type=3 snAgTftpServerAddr(66) type=2 - snAgGblDeleteFirstBeforeDownload(67) type=3 snAgGblPasswordCheckMode(68) type=3 + snAgGblEnableTelnetAuthentication(69) type=3 + snAgGblManager2FactorAuthentication(70) type=3 + snAgDefGwayIpv6(71) type=2 hint=2x: + snAgEraseConfig(72) type=3 + snAgSaveConfig(73) type=3 + snAgGblFirmWareDownLoadState(74) type=3 snAgentBrd(2) type=0 snAgentBrdTable(1) type=0 snAgentBrdEntry(1) type=0 @@ -278832,8 +278826,6 @@ snAgentBrdMemoryAvailable(25) type=11 snAgentBrdSerialNumber(26) type=2 snAgentBrdPartNumber(27) type=2 - snAgentBrdMemoryUtil100thPercent(28) type=15 - snAgentBrdUpTime(29) type=8 snAgentBrd2Table(2) type=0 snAgentBrd2Entry(1) type=0 snAgentBrd2Unit(1) type=16 @@ -278975,7 +278967,6 @@ snCpuProcess5MinUtil(4) type=7 snCpuProcess15MinUtil(5) type=7 snCpuProcessRuntime(6) type=6 - snAgentCpuProcessEnable(3) type=3 snAgentHw(12) type=0 snAgentHwICBMCounterTable(1) type=0 snAgentHwICBMCounterEntry(1) type=0 @@ -279059,7 +279050,14 @@ snAgentTemp2SensorId(3) type=16 snAgentTemp2SensorDescr(4) type=2 snAgentTemp2Value(5) type=3 - snAgentPoe(14) type=0 + snAgentTempThreshold2Table(4) type=0 + snAgentTempThreshold2Entry(1) type=0 + snAgentTempThreshold2UnitNum(1) type=3 + snAgentTempThreshold2Rule(2) type=3 + snAgentTempThreshold2LowValue(3) type=3 + snAgentTempThreshold2HighValue(4) type=3 + snAgentTempThreshold2ShutdownValue(5) type=3 + snAgentPoe(14) type=24 snAgentPoeGbl(1) type=0 snAgentPoeGblPowerCapacityTotal(1) type=15 snAgentPoeGblPowerCapacityFree(2) type=15 @@ -279074,6 +279072,15 @@ snAgentPoePortPriority(5) type=3 snAgentPoePortConsumed(6) type=16 snAgentPoePortType(7) type=2 hint=255a + snAgentPoePortPDClass(8) type=16 + snAgentPoePortPDClassB(9) type=16 + snAgentPoePortlldpReqPwr(10) type=16 + snAgentPoePortlldpReqPwrA(11) type=16 + snAgentPoePortlldpReqPwrB(12) type=16 + snAgentPoePortCapability(13) type=3 + snAgentPoePortMax2PairPwr(14) type=16 + snAgentPoePortMax4PairPwr(15) type=16 + snAgentPoePortMode(16) type=3 snAgentPoeModule(3) type=0 snAgentPoeModuleTable(1) type=0 snAgentPoeModuleEntry(1) type=0 @@ -279087,6 +279094,7 @@ snAgentPoeUnitPowerCapacityTotal(2) type=15 snAgentPoeUnitPowerCapacityFree(3) type=15 snAgentPoeUnitPowerAllocationsRequestsHonored(4) type=15 + snAgentPoePwrAllocationType(5) type=3 snAgentLicense(15) type=0 fdryLicenseTable(1) type=0 fdryLicenseEntry(1) type=0 @@ -279104,62 +279112,25 @@ fdryLicenseMode(12) type=3 fdryLicenseSerialNumber(13) type=2 fdryLicenseCapacity(14) type=16 - fdryLicensedFeatureInfo(2) type=12 brcdPortLicenseTable(3) type=0 brcdPortLicenseEntry(1) type=0 brcdPortLicenseIndex(1) type=16 hint=d brcdPortLicenseStatus(2) type=3 - brcdSw(16) type=0 - brcdSwPackageGroup(1) type=0 - brcdSwPackageUpgrade(1) type=0 - brcdSwPackageFname(1) type=2 - brcdSwPackageLoad(2) type=3 - brcdSwPackageLoadStatus(3) type=3 - brcdSwPackageUpgradeAllImages(4) type=3 - brcdSwPackageUpgradeResultTable(5) type=0 - brcdSwPackageUpgradeResultEntry(1) type=0 - brcdSwPackageUpgradeResultIndex(1) type=15 - brcdSwPackageUpgradeResultImageType(2) type=3 - brcdSwPackageUpgradeResultStatus(3) type=3 - brcdSwPackageUpgradeResultTimeStamp(4) type=8 - brcdSwPackageUpgradeResultDescription(5) type=2 - brcdSwPackageUpgradeSkipVersionCheck(6) type=3 - brcdSwIntfModAutoUpgrade(2) type=0 - brcdSwIntfModAutoUpgradeMode(1) type=3 - brcdSwIntfModAutoUpgradeTftpAddrType(2) type=3 - brcdSwIntfModAutoUpgradeTftpAddr(3) type=2 - brcdSwIntfModAutoUpgradeSrcPath(4) type=2 - brcdSwIntfModAutoUpgradeAllImages(5) type=3 - snAgentTask(17) type=0 - snAgentTaskCpuTable(1) type=0 - snAgentTaskCpuEntry(1) type=0 - snAgentTaskCpuTaskID(1) type=16 - snAgentTaskCpuTaskName(2) type=2 - snAgentTaskCpuState(3) type=2 - snAgentTaskCpuWaitTime(4) type=7 - snAgentTaskCpuHoldTime(5) type=7 - snAgentTaskCpuTaskActivity(6) type=2 - snAgentTaskMQTable(2) type=0 - snAgentTaskMQEntry(1) type=0 - snAgentTaskMQTaskID(1) type=16 - snAgentTaskMQPriority(2) type=16 - snAgentTaskMQTaskName(3) type=2 - snAgentTaskMQLength(4) type=16 - snAgentTaskMQDepth(5) type=7 - snAgentTaskMQMaxDepth(6) type=6 - snAgentTaskMQStickyMaxDepth(7) type=6 - snAgentTaskMQMsgs(8) type=7 - snAgentTaskMQMaxMsgs(9) type=6 - snAgentTaskMQStickyMaxMsgs(10) type=6 - snAgentTaskMQFailedCount(11) type=7 - snAgentTaskMQStickyFailedCount(12) type=6 - snAgentTaskBufferTable(3) type=0 - snAgentTaskBufferEntry(1) type=0 - snAgentTaskBufferTaskID(1) type=16 - snAgentTaskBufferPoolID(2) type=16 - snAgentTaskBufferTaskName(3) type=2 - snAgentTaskBufferCount(4) type=7 - snSwitch(3) type=0 + snSAULicenseUnitTable(4) type=0 + snSAULicenseUnitEntry(1) type=0 + snSAULicenseUnitIndex(1) type=16 + snSAULicensePackageName(2) type=2 + snSAUIsPremLicensePresent(3) type=3 + snSAUIsPoDLicensePresent(4) type=3 + snSAUPoDLicensedSpeed(5) type=3 + snSAUPoDLicensedPorts(6) type=16 + snSAUIsMACSecLicensePresent(7) type=3 + snSAUPremSerialNumber(8) type=2 + snSAUPoDSerialNumber(9) type=2 + snSAUMACsecSerialNumber(10) type=2 + snSAUICX7150SerialNumber(11) type=2 + snSAUICX8200SerialNumber(12) type=2 + snSwitch(3) type=24 snSwInfo(1) type=0 snSwGroupOperMode(1) type=3 snSwGroupIpL3SwMode(2) type=3 @@ -279177,7 +279148,7 @@ snSwGlobalStpMode(14) type=3 snSwIpMcastQuerierMode(15) type=3 snSwViolatorPortNumber(17) type=16 - snSwViolatorMacAddress(18) type=2 + snSwViolatorMacAddress(18) type=2 hint=1x: snVLanGroupVlanMaxEntry(19) type=16 snSwEosBufferSize(20) type=16 snVLanByPortEntrySize(21) type=16 @@ -279204,7 +279175,13 @@ snSwFastStpMode(42) type=3 snSwViolatorIfIndex(43) type=16 snSwSingleStpVLanId(44) type=16 - snSwBroadcastLimit2(45) type=15 + snSwJumboMode(45) type=3 + snSwACLPerPortPerVlanMode(46) type=3 + snSwIpMcastVersion(47) type=16 + snSwMgmtVlan(48) type=16 + snSwErrDisableRecoveryTimeout(49) type=15 + snSwErrDisableRecoveryCause(50) type=15 + snSwFwdProfileNumber(51) type=3 snVLanInfo(2) type=0 snVLanByPortTable(1) type=0 snVLanByPortEntry(1) type=0 @@ -279231,7 +279208,7 @@ snVLanByPortStpRootCost(21) type=16 snVLanByPortStpRootPort(22) type=16 snVLanByPortStpDesignatedRoot(23) type=2 - snVLanByPortBaseBridgeAddress(24) type=2 + snVLanByPortBaseBridgeAddress(24) type=2 hint=1x: snVLanByPortVLanName(25) type=2 snVLanByPortRouterIntf(26) type=16 snVLanByPortChassisPortMask(27) type=2 @@ -279325,30 +279302,15 @@ snVLanByPortCfgStpRootCost(17) type=16 snVLanByPortCfgStpRootPort(18) type=16 snVLanByPortCfgStpDesignatedRoot(19) type=2 - snVLanByPortCfgBaseBridgeAddress(20) type=2 + snVLanByPortCfgBaseBridgeAddress(20) type=2 hint=1x: snVLanByPortCfgVLanName(21) type=2 snVLanByPortCfgRouterIntf(22) type=16 snVLanByPortCfgRowStatus(23) type=3 snVLanByPortCfgStpVersion(24) type=3 snVLanByPortCfgInOctets(25) type=11 - snVLanByPortCfgTransparentHwFlooding(26) type=3 - brcdVlanExtStatsTable(8) type=0 - brcdVlanExtStatsEntry(1) type=0 - brcdVlanExtStatsVlanId(1) type=16 hint=d - brcdVlanExtStatsIfIndex(2) type=16 hint=d - brcdVlanExtStatsPriorityId(3) type=3 - brcdVlanExtStatsInSwitchedPkts(4) type=11 - brcdVlanExtStatsInRoutedPkts(5) type=11 - brcdVlanExtStatsInPkts(6) type=11 - brcdVlanExtStatsOutSwitchedPkts(7) type=11 - brcdVlanExtStatsOutRoutedPkts(8) type=11 - brcdVlanExtStatsOutPkts(9) type=11 - brcdVlanExtStatsInSwitchedOctets(10) type=11 - brcdVlanExtStatsInRoutedOctets(11) type=11 - brcdVlanExtStatsInOctets(12) type=11 - brcdVlanExtStatsOutSwitchedOctets(13) type=11 - brcdVlanExtStatsOutRoutedOctets(14) type=11 - brcdVlanExtStatsOutOctets(15) type=11 + snVLanByPortCfgMcastMode(26) type=3 + snVLanByPortCfgMcastVersion(27) type=16 + snVLanByPortCfgLoopDetectionMode(28) type=3 snSwPortInfo(3) type=0 snSwPortInfoTable(1) type=0 snSwPortInfoEntry(1) type=0 @@ -279362,7 +279324,7 @@ snSwPortInfoAdminStatus(8) type=3 snSwPortInfoLinkStatus(9) type=3 snSwPortInfoPortQos(10) type=3 - snSwPortInfoPhysAddress(11) type=2 + snSwPortInfoPhysAddress(11) type=2 hint=1x: snSwPortStatsInFrames(12) type=6 snSwPortStatsOutFrames(13) type=6 snSwPortStatsAlignErrors(14) type=6 @@ -279454,7 +279416,7 @@ snSwIfInfoAdminStatus(10) type=3 snSwIfInfoLinkStatus(11) type=3 snSwIfInfoPortQos(12) type=3 - snSwIfInfoPhysAddress(13) type=2 + snSwIfInfoPhysAddress(13) type=2 hint=1x: snSwIfLockAddressCount(14) type=3 snSwIfStpPortEnable(15) type=3 snSwIfDhcpGateListId(16) type=3 @@ -279501,9 +279463,18 @@ snSwIfStatsOutJumboFrames(57) type=11 snSwIfInfoMirrorMode(58) type=3 snSwIfMacLearningDisable(59) type=3 - snSwIfInfoL2FowardEnable(60) type=3 - snSwIfInfoAllowAllVlan(61) type=3 - snSwIfInfoNativeMacAddress(62) type=2 + snSwIfInfoNativeMacAddress(62) type=2 hint=1x: + snSwIfQosMonitorDropCounterMode(63) type=3 + snSwIfLRMAdapterPresent(64) type=3 + snSwIfStpBPDUGuardMode(65) type=3 + snSwIfStpRootGuardMode(66) type=3 + snSwIfRstpAdminEdgePortMode(67) type=3 + snSwIfInfoClockMode(68) type=3 + snSwIfProtectedMode(69) type=3 + snSwIfTrustDscpMode(70) type=3 + snSwIfVoiceVlanId(71) type=16 + snSwIfPortLoopDetectionMode(72) type=3 + snSWIfErrDisableStatus(73) type=3 snIfOpticalMonitoringInfoTable(6) type=0 snIfOpticalMonitoringInfoEntry(1) type=0 snIfOpticalMonitoringTemperature(1) type=2 @@ -279532,6 +279503,7 @@ snIfOpticalLaneMonitoringTxPower(3) type=2 snIfOpticalLaneMonitoringRxPower(4) type=2 snIfOpticalLaneMonitoringTxBiasCurrent(5) type=2 + snIfOpticalLaneMonitoringVoltage(6) type=2 brcdIfEgressCounterInfoTable(11) type=0 brcdIfEgressCounterInfoEntry(1) type=0 brcdIfEgressCounterIfIndex(1) type=16 hint=d @@ -279539,11 +279511,20 @@ brcdIfEgressCounterType(3) type=3 brcdIfEgressCounterPkts(4) type=11 brcdIfEgressCounterDropPkts(5) type=11 + snSwIfInfoLimitTable(12) type=0 + snSwIfInfoLimitEntry(1) type=0 + snSwIfInfoLimitType(1) type=3 + snSwIfInfoLimitPkts(2) type=15 + snSwIfInfoLimitBits(3) type=15 units=KBPS + snSwIfInfoLimitThreshold(4) type=15 + snSwIfInfoLimitShutdownTime(5) type=15 units=seconds + snSwIfInfoLimitLog(6) type=3 + snSwIfInfoLimitRowStatus(7) type=3 snFdbInfo(4) type=0 snFdbTable(1) type=0 snFdbEntry(1) type=0 snFdbStationIndex(1) type=3 - snFdbStationAddr(2) type=2 + snFdbStationAddr(2) type=2 hint=1x: snFdbStationPort(3) type=16 snFdbVLanId(4) type=3 snFdbStationQos(5) type=3 @@ -279627,10 +279608,10 @@ snMacFilterEntry(1) type=0 snMacFilterIndex(1) type=16 snMacFilterAction(2) type=3 - snMacFilterSourceMac(3) type=2 - snMacFilterSourceMask(4) type=2 - snMacFilterDestMac(5) type=2 - snMacFilterDestMask(6) type=2 + snMacFilterSourceMac(3) type=2 hint=1x: + snMacFilterSourceMask(4) type=2 hint=1x: + snMacFilterDestMac(5) type=2 hint=1x: + snMacFilterDestMask(6) type=2 hint=1x: snMacFilterOperator(7) type=3 snMacFilterFrameType(8) type=3 snMacFilterFrameTypeNum(9) type=3 @@ -279705,29 +279686,36 @@ snQosBindProfileIndex(3) type=3 snDosAttack(3) type=0 snDosAttackGlobal(1) type=0 - snDosAttackICMPDropCount(1) type=6 - snDosAttackICMPBlockCount(2) type=6 - snDosAttackSYNDropCount(3) type=6 - snDosAttackSYNBlockCount(4) type=6 + snDosAttackICMPDropCount(1) type=11 + snDosAttackICMPBlockCount(2) type=11 + snDosAttackSYNDropCount(3) type=11 + snDosAttackSYNBlockCount(4) type=11 snDosAttackPortTable(2) type=0 snDosAttackPortEntry(1) type=0 snDosAttackPort(1) type=16 - snDosAttackPortICMPDropCount(2) type=6 - snDosAttackPortICMPBlockCount(3) type=6 - snDosAttackPortSYNDropCount(4) type=6 - snDosAttackPortSYNBlockCount(5) type=6 + snDosAttackPortICMPDropCount(2) type=11 + snDosAttackPortICMPBlockCount(3) type=11 + snDosAttackPortSYNDropCount(4) type=11 + snDosAttackPortSYNBlockCount(5) type=11 snAAA(15) type=0 snAuthentication(1) type=0 + snAuthenticationDot1x(1) type=2 + snAuthenticationEnable(2) type=2 + snAuthenticationLogin(3) type=2 + snAuthenticationSnmpserver(4) type=2 + snAuthenticationWebserver(5) type=2 snAuthorization(2) type=0 snAuthorizationCommandMethods(1) type=2 snAuthorizationCommandLevel(2) type=3 snAuthorizationExec(3) type=2 + snAuthorizationCoaEnable(4) type=3 + snAuthorizationCoaIgnore(5) type=2 snAccounting(3) type=0 snAccountingCommandMethods(1) type=2 snAccountingCommandLevel(2) type=3 snAccountingExec(3) type=2 snAccountingSystem(4) type=2 - snCAR(16) type=0 + snCAR(16) type=24 snPortCARs(1) type=0 snPortCARTable(1) type=0 snPortCAREntry(1) type=0 @@ -279746,36 +279734,13 @@ snPortCARStatFilteredPkts(13) type=11 snPortCARStatFilteredBytes(14) type=11 snPortCARStatCurBurst(15) type=7 + snPortCARRowStatus(16) type=3 agRateLimitCounterTable(2) type=0 agRateLimitCounterEntry(1) type=0 agRateLimitCounterFwdedOctets(1) type=11 agRateLimitCounterDroppedOctets(2) type=11 agRateLimitCounterReMarkedOctets(3) type=11 agRateLimitCounterTotalOctets(4) type=11 - agRateLimitCounterIndexTable(3) type=0 - agRateLimitCounterIndexEntry(1) type=0 - agRateLimitCounterIndexRowIndex(1) type=3 - agRateLimitCounterIndexDirection(2) type=3 - agRateLimitCounterIndexACLID(3) type=16 - agRateLimitCounterIndexVLANID(4) type=16 - agRateLimitCounterIndexVLANGroupID(5) type=16 - agRateLimitCounterIndexMACAddress(6) type=2 hint=1x: - agRateLimitBUMCounterTable(4) type=0 - agRateLimitBUMCounterEntry(1) type=0 - agRateLimitBUMCounterIfindex(1) type=16 hint=d - agRateLimitBUMCounterVLANID(2) type=16 - agRateLimitBUMCounterPacketType(3) type=3 - agRateLimitBUMCounterDroppedOctets(4) type=11 - agRateLimitBUMCounterCBS(5) type=11 - agRateLimitBUMCounterCIR(6) type=11 - agRateLimitBUMCounterAlertLowLevelThreshold(7) type=11 - agRateLimitBUMCounterAlertHighLevelThreshold(8) type=11 - agRateLimitBUMCounterShutdownTimeout(9) type=16 - snBUMRLNotifications(5) type=0 - snTrapBUMratelimitAlertLowThreshold(1) type=21 - snTrapBUMratelimitAlertHighThreshold(2) type=21 - snTrapBUMratelimitShutdownLinkDown(3) type=21 - snTrapBUMratelimitShutdownLinkUp(4) type=21 snVLanCAR(17) type=0 snVLanCARs(1) type=0 snVLanCARTable(1) type=0 @@ -279826,6 +279791,11 @@ snNetFlowIfFlowSwitching(2) type=3 snSFlow(19) type=0 snSFlowGlb(1) type=0 + snSflowStatus(1) type=3 + snSflowSampleRate(2) type=15 + snSflowSourcePort(3) type=15 + snSflowAgentAddrType(4) type=3 + snSflowAgentAddr(5) type=2 snSflowCollectorTable(2) type=0 snSflowCollectorEntry(1) type=0 snSflowCollectorIndex(1) type=16 @@ -279871,7 +279841,7 @@ snFdpCachedAddrDeviceAddrEntryIndex(3) type=16 snFdpCachedAddrType(4) type=3 snFdpCachedAddrValue(5) type=2 - snVsrp(21) type=0 + snVsrp(21) type=24 snVsrpGlobal(1) type=0 snVsrpGroupOperModeVsrp(1) type=3 snVsrpIfStateChangeTrap(2) type=3 @@ -279921,7 +279891,7 @@ snVsrpVirRtrCurHelloInt(32) type=3 snVsrpVirRtrCurHoldDownInt(33) type=3 snVsrpVirRtrCurInitTtl(34) type=3 - snVsrpVirRtrHelloMacAddress(35) type=2 + snVsrpVirRtrHelloMacAddress(35) type=2 hint=1x: snVsrpVirRtrMasterIpAddr(36) type=5 snArpInfo(22) type=0 snArpStats(1) type=0 @@ -279932,7 +279902,7 @@ snArpStatsPendingDrop(5) type=6 snArpStatsInvalidSource(6) type=6 snArpStatsInvalidDestination(7) type=6 - snWireless(23) type=0 + snWireless(23) type=24 wgGroup(1) type=0 wgMobilityId(1) type=16 wgVpnPTDeletePolicy(2) type=16 @@ -279952,7 +279922,7 @@ wgPnPTable(4) type=0 wgPnPEntry(1) type=0 wgPnPIfIndex(1) type=16 - wgPnPMacAddress(2) type=2 + wgPnPMacAddress(2) type=2 hint=1x: wgPnPIpAddress(3) type=5 wgPnPIpMask(4) type=5 wgPnPIpDefaultGw(5) type=5 @@ -279981,7 +279951,7 @@ snPortMacSecurityIfIndex(1) type=15 snPortMacSecurityResource(2) type=3 snPortMacSecurityQueryIndex(3) type=15 - snPortMacSecurityMAC(4) type=2 + snPortMacSecurityMAC(4) type=2 hint=1x: snPortMacSecurityAgeLeft(5) type=15 snPortMacSecurityShutdownStatus(6) type=3 snPortMacSecurityShutdownTimeLeft(7) type=15 @@ -280007,7 +279977,7 @@ snPortMacSecurityIntfMacTable(4) type=0 snPortMacSecurityIntfMacEntry(1) type=0 snPortMacSecurityIntfMacIfIndex(1) type=16 - snPortMacSecurityIntfMacAddress(2) type=2 + snPortMacSecurityIntfMacAddress(2) type=2 hint=1x: snPortMacSecurityIntfMacVlanId(3) type=15 snPortMacSecurityIntfMacRowStatus(4) type=3 snPortMacSecurityAutosaveMacTable(5) type=0 @@ -280015,7 +279985,7 @@ snPortMacSecurityAutosaveMacIfIndex(1) type=16 snPortMacSecurityAutosaveMacResource(2) type=3 snPortMacSecurityAutosaveMacQueryIndex(3) type=15 - snPortMacSecurityAutosaveMacAddress(4) type=2 + snPortMacSecurityAutosaveMacAddress(4) type=2 hint=1x: snPortMacGlobalSecurity(2) type=0 snPortMacGlobalSecurityFeature(1) type=3 snPortMacGlobalSecurityAgeOutTime(2) type=15 @@ -280049,7 +280019,7 @@ snMacAuthClearMacSessionIfIndex(1) type=16 hint=d snMacAuthClearMacSessionMac(2) type=2 hint=1x: snMacAuthClearMacSessionAction(3) type=3 - snMetroRing(29) type=0 + snMetroRing(29) type=24 snMetroRingGlobalObjects(1) type=0 snMetroRingTableObjects(2) type=0 snMetroRingTable(1) type=0 @@ -280078,7 +280048,7 @@ snMetroRingSecPortType(22) type=3 snMetroRingPriPortActivePort(23) type=16 hint=d snMetroRingSecPortActivePort(24) type=16 hint=d - snStacking(31) type=0 + snStacking(31) type=24 snStackingGlobalObjects(1) type=0 snStackingGlobalConfigState(1) type=3 snStackingGlobalMacAddress(2) type=2 hint=1x: @@ -280089,6 +280059,7 @@ snStackingGlobalMixedMode(7) type=3 snStackingGlobalMaxUnitNumber(8) type=16 snStackingGlobalHighestPriority(9) type=16 + snStackingGlobalZeroTouchEnable(10) type=3 snStackingTableObjects(2) type=0 snStackingConfigUnitTable(1) type=0 snStackingConfigUnitEntry(1) type=0 @@ -280102,6 +280073,9 @@ snStackingConfigUnitStackPort2(8) type=16 hint=d snStackingConfigUnitConnectPort1(9) type=16 hint=d snStackingConfigUnitConnectPort2(10) type=16 hint=d + snStackingConfigUnitStackTrunk1(11) type=2 + snStackingConfigUnitStackTrunk2(12) type=2 + snStackingConfigUnitName(13) type=2 snStackingOperUnitTable(2) type=0 snStackingOperUnitEntry(1) type=0 snStackingOperUnitIndex(1) type=16 @@ -280165,9 +280139,7 @@ fdryMacBasedVlanMac(2) type=2 hint=1x: fdryMacBasedVlanPriority(3) type=16 fdryMacBasedVlanRowStatus(4) type=3 - fdryLinkAggregationGroupMIB(33) type=0 - fdryLinkAggregationGroupNotifyObjects(0) type=0 - fdryLAGName(1) type=2 hint=255a + fdryLinkAggregationGroupMIB(33) type=24 fdryLinkAggregationGroupTableObjects(1) type=0 fdryLinkAggregationGroupTable(1) type=0 fdryLinkAggregationGroupEntry(1) type=0 @@ -280183,6 +280155,8 @@ fdryLinkAggregationGroupPortCount(10) type=15 fdryLinkAggregationGroupRowStatus(11) type=3 fdryLinkAggregationGroupId(12) type=15 + fdryLinkAggregationGroupLacpMode(13) type=15 + fdryLinkAggregationGroupLagMac(14) type=2 hint=1x: fdryLinkAggregationGroupPortTableObjects(2) type=0 fdryLinkAggregationGroupPortTable(1) type=0 fdryLinkAggregationGroupPortEntry(1) type=0 @@ -280193,11 +280167,11 @@ fdryLinkAggregationGroupLacpPortAdminStatus(1) type=3 fdryLinkAggregationGroupLacpPortLinkStatus(2) type=3 fdryLinkAggregationGroupLacpPortLacpStatus(3) type=3 - fdryLinkAggregationGroupLacpPortLacpSysID(4) type=2 + fdryLinkAggregationGroupLacpPortLacpSysID(4) type=2 hint=1x: fdryLinkAggregationGroupLacpPortLacpKey(5) type=3 - fdryLinkAggregationGroupLacpPortLacpRemoteSysID(6) type=2 + fdryLinkAggregationGroupLacpPortLacpRemoteSysID(6) type=2 hint=1x: fdryLinkAggregationGroupLacpPortLacpRemoteKey(7) type=3 - fdryDns2MIB(34) type=0 + fdryDns2MIB(34) type=24 fdryDns2DomainName(1) type=0 fdryDns2DomainNameTable(1) type=0 fdryDns2DomainNameEntry(1) type=0 @@ -280212,7 +280186,7 @@ fdryDnsServerIndex(2) type=15 fdryDnsServerAddr(3) type=2 fdryDnsServerRowStatus(4) type=3 - fdryDaiMIB(35) type=0 + fdryDaiMIB(35) type=24 fdryDaiVlan(1) type=0 fdryDaiVlanConfigTable(1) type=0 fdryDaiVlanConfigEntry(1) type=0 @@ -280232,7 +280206,7 @@ fdryDaiArpInspectState(5) type=3 fdryDaiArpInspectAge(6) type=15 fdryDaiArpInspectPort(7) type=2 - fdryDhcpSnoopMIB(36) type=0 + fdryDhcpSnoopMIB(36) type=24 fdryDhcpSnoopGlobalObjects(1) type=0 fdryDhcpSnoopGlobalClearOper(1) type=3 fdryDhcpSnoopVlan(2) type=0 @@ -280254,7 +280228,16 @@ fdryDhcpSnoopBindPort(5) type=2 fdryDhcpSnoopBindVlanId(6) type=15 hint=d fdryDhcpSnoopBindClearOper(7) type=3 - fdryIpSrcGuardMIB(37) type=0 + fdryDhcpSnoopBind2Table(2) type=0 + fdryDhcpSnoopBind2Entry(1) type=0 + fdryDhcpSnoopBind2MacAddr(1) type=2 hint=1x: + fdryDhcpSnoopBind2VlanId(2) type=15 hint=d + fdryDhcpSnoopBind2IpAddr(3) type=5 + fdryDhcpSnoopBind2Type(4) type=3 + fdryDhcpSnoopBind2State(5) type=3 + fdryDhcpSnoopBind2Port(6) type=16 hint=d + fdryDhcpSnoopBind2ClearOper(7) type=3 + fdryIpSrcGuardMIB(37) type=24 fdryIpSrcGuardInterface(1) type=0 fdryIpSrcGuardIfConfigTable(1) type=0 fdryIpSrcGuardIfConfigEntry(1) type=0 @@ -280422,7 +280405,528 @@ brcdSPXPEGroupPEGroup(2) type=2 brcdSPXPEGroupPEIdList(3) type=2 brcdSPXPEGroupCBSPXEndPort(4) type=16 hint=d - snL4(4) type=0 + brcdStackISSUMIB(41) type=24 + brcdStackISSUGlobalObjects(1) type=0 + brcdStackISSUGlobalUpgradeOption(1) type=3 + brcdStackISSUGlobalUpgradeStatus(2) type=3 + brcdStackISSUGlobalUpgradeSystemReady(3) type=3 + brcdStackISSUGlobalUpgradeError(4) type=2 + brcdStackISSUTableObjects(2) type=0 + brcdStackISSUStatusUnitTable(1) type=0 + brcdStackISSUStatusUnitEntry(1) type=0 + brcdStackISSUStatusUnitIndex(1) type=16 + brcdStackISSUStatusUnitSequence(2) type=16 + brcdStackISSUStatusUnitType(3) type=2 + brcdStackISSUStatusUnitRole(4) type=3 + brcdStackISSUStatusUnitStatus(5) type=3 + snDhcpServer(42) type=24 + snDhcpServerGlobalObjects(1) type=0 + snDhcpServerGlobalConfigState(1) type=3 + snDhcpServerTableObjects(2) type=0 + snDhcpServerPoolConfigTable(1) type=0 + snDhcpServerPoolConfigEntry(1) type=0 + snDhcpServerPoolName(1) type=2 + snDhcpServerPoolNetwork(2) type=5 + snDhcpServerPoolNetworkMask(3) type=5 + snDhcpServerPoolStartAddr(4) type=5 + snDhcpServerPoolEndAddr(5) type=5 + snDhcpServerPoolLeaseDay(6) type=16 + snDhcpServerPoolLeaseHour(7) type=16 + snDhcpServerPoolLeaseMinute(8) type=16 + snDhcpServerPoolDeploy(9) type=3 + snDhcpServerPoolRowStatus(10) type=3 + snDhcpServerPoolOptionConfigTable(2) type=0 + snDhcpServerPoolOptionConfigEntry(1) type=0 + snDhcpServerPoolOptionCode(1) type=16 + snDhcpServerPoolOptionType(2) type=3 + snDhcpServerPoolOptionAscii(3) type=2 + snDhcpServerPoolOptionHexString(4) type=2 + snDhcpServerPoolOptionIPString(5) type=2 + snDhcpServerPoolOptionRowStatus(6) type=3 + snDhcpServerPoolOptionBoolString(7) type=2 + snDhcpServerPoolOptionIntString(8) type=2 + snDhcpServerPoolOptionIPAddrPairString(9) type=2 + snDhcpServerPoolOptionStaticRouteString(10) type=2 + snDhcpServerPoolOptionSlpDirAgentString(11) type=2 + snDhcpServerPoolOptionSlpSrvScopeString(12) type=2 + snDhcpServerPoolOptionPxeIntfIdString(13) type=2 + snDhcpServerPoolOptionPxeClientIdString(14) type=2 + snDhcpServerPoolExcludedSingleAddressTable(3) type=0 + snDhcpServerPoolExcludedSingleAddressEntry(1) type=0 + snDhcpServerPoolExcludedAddressIndex(1) type=16 + snDhcpServerPoolExcludedSingleAddress(2) type=5 + snDhcpServerPoolExcludedSingleAddressRowStatus(3) type=3 + snDhcpServerPoolExcludedAddressRangeTable(4) type=0 + snDhcpServerPoolExcludedAddressRangeEntry(1) type=0 + snDhcpServerPoolExcludedAddressRangeIndex(1) type=16 + snDhcpServerPoolExcludedStartAddress(2) type=5 + snDhcpServerPoolExcludedEndAddress(3) type=5 + snDhcpServerPoolExcludedAddressRowStatus(4) type=3 + ruckusWiredClientMIB(43) type=24 + ruckusWiredClientNotify(0) type=0 + ruckusWiredClientConnectedNotify(1) type=21 + ruckusWiredClientDisconnectedNotify(2) type=21 + ruckusWiredClientObjects(1) type=0 + ruckusWiredClients(1) type=0 + ruckusWiredClientsTable(1) type=0 + ruckusWiredClientEntry(1) type=0 + ruckusWiredClientMac(1) type=2 hint=1x: + ruckusWiredClientVlan(2) type=3 + ruckusWiredClientType(3) type=3 + ruckusWiredClientAuthType(4) type=3 + ruckusWiredClientStatus(5) type=3 + ruckusWiredClientDescr(6) type=2 hint=255t + ruckusWiredClientUserName(7) type=2 hint=255t + ruckusWiredClientV4Addr(8) type=2 hint=1d.1d.1d.1d + ruckusWiredClientV6Addr(9) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusWiredClientUpTime(10) type=8 units=centi-seconds + ruckusWiredClientTxPkts(11) type=11 + ruckusWiredClientRxPkts(12) type=11 + ruckusWiredClientTxOctets(13) type=11 + ruckusWiredClientRxOctets(14) type=11 + ruckusDhcpClientHostName(15) type=2 hint=255t + ruckusDhcpClientDeviceTypeName(16) type=2 hint=255t + ruckusDhcpClientOsVendorName(17) type=2 hint=255t + ruckusDhcpClientModelName(18) type=2 hint=255t + ruckusWiredClientConformance(2) type=0 + ruckusWiredClientMIBCompliances(1) type=0 + ruckusWiredClientCompliance(1) type=26 + ruckusWiredClientMIBGroups(2) type=0 + ruckusWiredClientGroup(1) type=22 + ruckusAuthMIB(44) type=24 + ruckusAuthNotification(0) type=0 + ruckusAuthPortAuthorizedNotif(1) type=21 + ruckusAuthPortUnauthorizedNotif(2) type=21 + ruckusAuthMacAuthorizedNotif(3) type=21 + ruckusAuthMacUnauthorizedNotif(4) type=21 + ruckusAuthAclFailNotif(5) type=21 + ruckusAuthObjects(1) type=0 + ruckusAuthConfig(1) type=0 + ruckusAuthDefaultVlan(1) type=3 + ruckusAuthVoiceVlan(2) type=3 + ruckusAuthCriticalVlan(3) type=3 + ruckusAuthRestrictVlan(4) type=3 + ruckusAuthEnable(5) type=12 + ruckusAuthMode(6) type=3 + ruckusAuthMethods(7) type=3 + ruckusAuthMaxSessions(8) type=15 + ruckusAuthFailAction(9) type=3 + ruckusAuthTimeoutAction(10) type=3 + ruckusAuthReauthEnable(11) type=3 + ruckusAuthReauthPeriod(12) type=15 units=seconds + ruckusAuthReauthTimeout(13) type=15 units=seconds + ruckusAuthIdleTimeout(14) type=15 units=seconds + ruckusAuthDeniedTimeout(15) type=15 units=seconds + ruckusAuthAging(16) type=12 + ruckusAuthDefaultV4IngressAcl(17) type=2 hint=255a + ruckusAuthDefaultV4EgressAcl(18) type=2 hint=255a + ruckusAuthDefaultV6IngressAcl(19) type=2 hint=255a + ruckusAuthDefaultV6EgressAcl(20) type=2 hint=255a + ruckusDot1xAuthConfig(2) type=0 + ruckusDot1xQuietPeriod(1) type=15 units=seconds + ruckusDot1xTxPeriod(2) type=15 units=seconds + ruckusDot1xSuppTimeout(3) type=15 units=seconds + ruckusDot1xMaxReq(4) type=15 + ruckusDot1xMaxReauthReq(5) type=15 + ruckusDot1xGuestVlan(6) type=3 + ruckusDot1xMacAuthOverride(7) type=3 + ruckusMacAuthConfig(3) type=0 + ruckusMacAuthPasswordFormat(1) type=3 + ruckusMacAuthPasswordOverride(2) type=2 hint=255a + ruckusMacAuthDot1xOverride(3) type=3 + ruckusMacAuthDot1xEnable(4) type=3 + ruckusWebAuthConfig(4) type=0 + ruckusWebAuthTable(1) type=0 + ruckusWebAuthEntry(1) type=0 + ruckusWebAuthVlan(1) type=3 + ruckusWebAuthEnable(2) type=3 + ruckusWebAuthMode(3) type=3 + ruckusWebAuthMethod(4) type=3 + ruckusWebAuthMaxHosts(5) type=15 + ruckusWebAuthMaxAuthAttempts(6) type=15 + ruckusWebAuthReauthTime(7) type=15 units=seconds + ruckusWebAuthCycleTime(8) type=15 units=seconds + ruckusWebAuthBlockTime(9) type=15 units=seconds + ruckusWebAuthMacAgeTime(10) type=15 + ruckusWebAuthPasscode(11) type=2 hint=255a + ruckusWebAuthLocalUserDb(12) type=2 hint=255a + ruckusWebAuthSecureLogin(13) type=3 + ruckusWebAuthAccounting(14) type=3 + ruckusWebAuthCaptiveProfile(15) type=2 hint=255a + ruckusWebAuthRedirectName(16) type=2 hint=255a + ruckusWebAuthWebpageRemoveUserId(17) type=3 + ruckusWebAuthWebpageUsernameLabel(18) type=2 hint=255a + ruckusWebAuthWebpagePasswordLabel(19) type=2 hint=255a + ruckusWebAuthUpLinkPort(20) type=16 hint=d + ruckusWebAuthWebpageTop(21) type=2 hint=255a + ruckusWebAuthWebpageBottom(22) type=2 hint=255a + ruckusWebAuthWebpageTitle(23) type=2 hint=255a + ruckusWebAuthWebpageLoginButton(24) type=2 hint=255a + ruckusWebAuthTrustPortTable(2) type=0 + ruckusWebAuthTrustPortEntry(1) type=0 + ruckusWebAuthTrustPort(1) type=16 hint=d + ruckusWebAuthDnsFilterTable(3) type=0 + ruckusWebAuthDnsFilterEntry(1) type=0 + ruckusWebAuthDnsFilterId(1) type=3 + ruckusWebAuthDnsFilterType(2) type=3 + ruckusWebAuthDnsFilterAddr(3) type=2 + ruckusWebAuthDnsFilterPrefix(4) type=15 + ruckusWebAuthWhiteListTable(4) type=0 + ruckusWebAuthWhiteListEntry(1) type=0 + ruckusWebAuthWhiteListId(1) type=3 + ruckusWebAuthWhiteListType(2) type=3 + ruckusWebAuthWhiteListAddr(3) type=2 + ruckusWebAuthWhiteListPrefix(4) type=15 + ruckusWebAuthFilterTable(5) type=0 + ruckusWebAuthFilterEntry(1) type=0 + ruckusWebAuthFilterMac(1) type=2 hint=1x: + ruckusWebAuthFilterPort(2) type=16 hint=d + ruckusWebAuthFilterDuration(3) type=15 units=seconds + ruckusWebAuthFilterAction(4) type=3 + ruckusWebAuthCaptivePortalTable(6) type=0 + ruckusWebAuthCaptivePortalEntry(1) type=0 + ruckusWebAuthCaptivePortalName(1) type=2 hint=255a + ruckusWebAuthCaptivePortalType(2) type=3 + ruckusWebAuthCaptivePortalAddr(3) type=2 + ruckusWebAuthCaptivePortalPort(4) type=15 + ruckusWebAuthCaptivePortalLoginPage(5) type=2 hint=255a + ruckusAuthPortConfig(5) type=0 + ruckusAuthPortTable(1) type=0 + ruckusAuthPortEntry(1) type=0 + ruckusAuthPortEnable(1) type=12 + ruckusAuthPortDot1xControl(2) type=3 + ruckusAuthPortDefaultVlan(3) type=3 + ruckusAuthPortVoiceVlan(4) type=3 + ruckusAuthPortCriticalVlan(5) type=3 + ruckusAuthPortRestrictVlan(6) type=3 + ruckusAuthPortMode(7) type=3 + ruckusAuthPortMethods(8) type=3 + ruckusAuthPortMaxSessions(9) type=15 + ruckusAuthPortFailAction(10) type=3 + ruckusAuthPortTimeoutAction(11) type=3 + ruckusAuthPortReauthTimeout(12) type=15 units=seconds + ruckusAuthPortAging(13) type=12 + ruckusAuthPortAllowTagged(14) type=3 + ruckusAuthPortSourceGuard(15) type=3 + ruckusAuthPortDosAttacks(16) type=3 + ruckusAuthPortDosAttackLimit(17) type=15 + ruckusAuthFilterConfig(6) type=0 + ruckusAuthFilterTable(1) type=0 + ruckusAuthFilterEntry(1) type=0 + ruckusAuthFilterId(1) type=3 + ruckusAuthFilterMac(2) type=2 hint=1x: + ruckusAuthFilterMask(3) type=2 hint=1x: + ruckusAuthFilterVlan(4) type=3 + ruckusAuthFilterAction(5) type=3 + ruckusAuthSessions(7) type=0 + ruckusAuthSessionTable(1) type=0 + ruckusAuthSessionEntry(1) type=0 + ruckusAuthSessionMac(1) type=2 hint=1x: + ruckusAuthSessionVlan(2) type=3 + ruckusAuthSessionVlanType(3) type=3 + ruckusAuthSessionTaggedVlan(4) type=3 + ruckusAuthSessionUserName(5) type=2 hint=255a + ruckusAuthSessionDeviceType(6) type=3 + ruckusAuthSessionMethod(7) type=3 + ruckusAuthSessionMode(8) type=3 + ruckusAuthSessionStatus(9) type=3 + ruckusAuthSessionDot1xStatus(10) type=3 + ruckusAuthSessionAgingType(11) type=3 + ruckusAuthSessionAge(12) type=15 units=seconds + ruckusAuthSessionTimeout(13) type=15 units=seconds + ruckusAuthSessionIdleTimeout(14) type=15 units=seconds + ruckusAuthSessionTime(15) type=15 units=seconds + ruckusAuthSessionV4IngressAcl(16) type=2 hint=255a + ruckusAuthSessionV4EgressAcl(17) type=2 hint=255a + ruckusAuthSessionV6IngressAcl(18) type=2 hint=255a + ruckusAuthSessionV6EgressAcl(19) type=2 hint=255a + ruckusAuthSessionTxOctets(20) type=11 + ruckusAuthSessionRxOctets(21) type=11 + ruckusAuthSessionTxPkts(22) type=11 + ruckusAuthSessionRxPkts(23) type=11 + ruckusAuthSessionFailureReason(24) type=2 hint=255a + ruckusAuthSessionFlags(25) type=12 + ruckusAuthSessionAddrTable(2) type=0 + ruckusAuthSessionAddrEntry(1) type=0 + ruckusAuthSessionAddrId(1) type=3 + ruckusAuthSessionAddrType(2) type=3 + ruckusAuthSessionAddr(3) type=2 + ruckusAuthStatistics(8) type=0 + ruckusAuthStatsTable(1) type=0 + ruckusAuthStatsEntry(1) type=0 + ruckusDot1xSessionsAttempted(1) type=6 + ruckusDot1xSessionsAccepted(2) type=6 + ruckusDot1xSessionsRejected(3) type=6 + ruckusDot1xSessionsInProgress(4) type=6 + ruckusDot1xSessionsErrored(5) type=6 + ruckusMacAuthSessionsAttempted(6) type=6 + ruckusMacAuthSessionsAccepted(7) type=6 + ruckusMacAuthSessionsRejected(8) type=6 + ruckusMacAuthSessionsInProgress(9) type=6 + ruckusMacAuthSessionsErrored(10) type=6 + ruckusDot1xAuthStatsTable(2) type=0 + ruckusDot1xAuthStatsEntry(1) type=0 + ruckusDot1xTxEAPFrames(1) type=6 + ruckusDot1xTxEAPReqIdFrames(2) type=6 + ruckusDot1xTxEAPReqFrames(3) type=6 + ruckusDot1xRxEAPFrames(4) type=6 + ruckusDot1xRxEAPStartFrames(5) type=6 + ruckusDot1xRxEAPLogOffFrames(6) type=6 + ruckusDot1xRxEAPRespIdFrames(7) type=6 + ruckusDot1xRxEAPRespFrames(8) type=6 + ruckusDot1xRxEAPInvalidFrames(9) type=6 + ruckusDot1xRxLengthErrorFrames(10) type=16 + ruckusDot1xRxEAPLastFrameVersion(11) type=15 + ruckusDot1xRxEAPLastFrameSource(12) type=2 hint=1x: + ruckusAuthConformance(2) type=0 + ruckusAuthMIBCompliances(1) type=0 + ruckusAuthCompliance(1) type=26 + ruckusAuthMIBGroups(2) type=0 + ruckusAuthConfigGroup(1) type=22 + ruckusDot1xAuthConfigGroup(2) type=22 + ruckusMacAuthConfigGroup(3) type=22 + ruckusAuthPortConfigGroup(4) type=22 + ruckusAuthFilterConfigGroup(5) type=22 + ruckusAuthSessionsGroup(6) type=22 + ruckusAuthStatsGroup(7) type=22 + ruckusDot1xAuthStatsGroup(8) type=22 + ruckusWebAuthConfigGroup(9) type=22 + ruckusAclMIB(45) type=24 + ruckusAclNotify(0) type=0 + ruckusAclObjects(1) type=0 + ruckusAcls(1) type=0 + ruckusAclTable(1) type=0 + ruckusAclEntry(1) type=0 + ruckusAclType(1) type=3 + ruckusAclName(2) type=2 + ruckusAclAcctEnable(3) type=3 + ruckusAclStandard(4) type=3 + ruckusAclRowStatus(5) type=3 + ruckusAclFilters(2) type=0 + ruckusIpv4Filters(1) type=0 + ruckusIpv4AclFilterTable(1) type=0 + ruckusIpv4AclFilterEntry(1) type=0 + ruckusIpv4AclFilterSeqNum(1) type=15 + ruckusIpv4AclFilterAction(2) type=3 + ruckusIpv4AclFilterStdProtocol(3) type=3 + ruckusIpv4AclFilterExtProtocol(4) type=3 + ruckusIpv4AclFilterSrcAddr(5) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterSrcMask(6) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterSrcOperator(7) type=3 + ruckusIpv4AclFilterSrcPortLow(8) type=15 + ruckusIpv4AclFilterSrcPortHigh(9) type=15 + ruckusIpv4AclFilterDestAddr(10) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterDestMask(11) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterDestOperator(12) type=3 + ruckusIpv4AclFilterDestPortLow(13) type=15 + ruckusIpv4AclFilterDestPortHigh(14) type=15 + ruckusIpv4AclFilterEstablished(15) type=3 + ruckusIpv4AclFilterPrecedence(16) type=3 + ruckusIpv4AclFilterTos(17) type=3 + ruckusIpv4AclFilterIcmpType(18) type=3 + ruckusIpv4AclFilterIcmpCode(19) type=3 + ruckusIpv4AclFilterExtIcmpType(20) type=3 + ruckusIpv4AclFilterPolicyName(21) type=2 + ruckusIpv4AclFilterDscpMatch(22) type=3 + ruckusIpv4AclFilterDscpForce(23) type=3 + ruckusIpv4AclFilterPriorityMatch(24) type=3 + ruckusIpv4AclFilterPriorityForce(25) type=3 + ruckusIpv4AclFilterInternalPriority(26) type=3 + ruckusIpv4AclFilterMirrorPkts(27) type=3 + ruckusIpv4AclFilterLogEnable(28) type=3 + ruckusIpv4AclFilterComments(29) type=2 hint=255a + ruckusIpv4AclFilterRowStatus(30) type=3 + ruckusIpv6Filters(2) type=0 + ruckusIpv6AclFilterTable(1) type=0 + ruckusIpv6AclFilterEntry(1) type=0 + ruckusIpv6AclFilterSeqNum(1) type=15 + ruckusIpv6AclFilterAction(2) type=3 + ruckusIpv6AclFilterStdProtocol(3) type=3 + ruckusIpv6AclFilterExtProtocol(4) type=3 + ruckusIpv6AclFilterSrcAddr(5) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusIpv6AclFilterSrcPrefixLen(6) type=15 + ruckusIpv6AclFilterSrcOperator(7) type=3 + ruckusIpv6AclFilterSrcPortLow(8) type=15 + ruckusIpv6AclFilterSrcPortHigh(9) type=15 + ruckusIpv6AclFilterDestAddr(10) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusIpv6AclFilterDestPrefixLen(11) type=15 + ruckusIpv6AclFilterDestOperator(12) type=3 + ruckusIpv6AclFilterDestPortLow(13) type=15 + ruckusIpv6AclFilterDestPortHigh(14) type=15 + ruckusIpv6AclFilterEstablished(15) type=3 + ruckusIpv6AclFilterIcmpType(16) type=3 + ruckusIpv6AclFilterIcmpCode(17) type=3 + ruckusIpv6AclFilterExtIcmpType(18) type=3 + ruckusIpv6AclFilterPolicyName(19) type=2 + ruckusIpv6AclFilterDscpMatch(20) type=3 + ruckusIpv6AclFilterDscpForce(21) type=3 + ruckusIpv6AclFilterPriorityMatch(22) type=3 + ruckusIpv6AclFilterPriorityForce(23) type=3 + ruckusIpv6AclFilterInternalPriority(24) type=3 + ruckusIpv6AclFilterFragments(25) type=3 + ruckusIpv6AclFilterSourceRoute(26) type=3 + ruckusIpv6AclFilterMirrorPkts(27) type=3 + ruckusIpv6AclFilterLogEnable(28) type=3 + ruckusIpv6AclFilterComments(29) type=2 hint=255a + ruckusIpv6AclFilterRowStatus(30) type=3 + ruckusMacFilters(3) type=0 + ruckusMacAclFilterTable(1) type=0 + ruckusMacAclFilterEntry(1) type=0 + ruckusMacAclFilterSeqNum(1) type=15 + ruckusMacAclFilterAction(2) type=3 + ruckusMacAclFilterSrcAddr(3) type=2 hint=1x: + ruckusMacAclFilterSrcMask(4) type=2 hint=1x: + ruckusMacAclFilterDestAddr(5) type=2 hint=1x: + ruckusMacAclFilterDestMask(6) type=2 hint=1x: + ruckusMacAclFilterEtherType(7) type=3 + ruckusMacAclFilterExtEtherType(8) type=15 hint=x + ruckusMacAclFilterMirrorPkts(9) type=3 + ruckusMacAclFilterLogEnable(10) type=3 + ruckusMacAclFilterRowStatus(11) type=3 + ruckusAclBindings(3) type=0 + ruckusAclIfBindTable(1) type=0 + ruckusAclIfBindEntry(1) type=0 + ruckusAclIfBindPort(1) type=16 hint=d + ruckusAclIfBindType(2) type=3 + ruckusAclIfBindDirection(3) type=3 + ruckusAclIfBindName(4) type=2 + ruckusAclIfBindLog(5) type=3 + ruckusAclIfBindRowStatus(6) type=3 + ruckusAclVlanBindTable(2) type=0 + ruckusAclVlanBindEntry(1) type=0 + ruckusAclVlanBindId(1) type=3 + ruckusAclVlanBindType(2) type=3 + ruckusAclVlanBindDirection(3) type=3 + ruckusAclVlanBindName(4) type=2 + ruckusAclVlanBindLog(5) type=3 + ruckusAclVlanBindRowStatus(6) type=3 + ruckusAclVPortBindTable(3) type=0 + ruckusAclVPortBindEntry(1) type=0 + ruckusAclVPortBindId(1) type=3 + ruckusAclVPortBindPort(2) type=16 hint=d + ruckusAclVPortBindType(3) type=3 + ruckusAclVPortBindDirection(4) type=3 + ruckusAclVPortBindName(5) type=2 + ruckusAclVPortBindLog(6) type=3 + ruckusAclVPortBindRowStatus(7) type=3 + ruckusAclConformance(2) type=0 + ruckusAclCompliances(1) type=0 + ruckusAclCompliance(1) type=26 + ruckusAclGroups(2) type=0 + ruckusAclGroup(1) type=22 + ruckusDhcpClientMIB(46) type=24 + ruckusDhcpClientGlobalObjects(1) type=0 + ruckusDhcpClientGlobalConfigState(1) type=3 + ruckusDhcpClientGlobalAutoUpdateConfigState(2) type=3 + ruckusDhcpClientSpecificVEPort(3) type=16 hint=d + ruckusNdiMIB(47) type=24 + ruckusNdiNotify(0) type=0 + ruckusNdiObjects(1) type=0 + ruckusNdiVlan(1) type=0 + ruckusNdiVlanConfigTable(1) type=0 + ruckusNdiVlanConfigEntry(1) type=0 + ruckusNdiVlanConfigVlanId(1) type=15 hint=d + ruckusNdiVlanDynNDInspectionEnable(2) type=3 + ruckusNdiInterface(2) type=0 + ruckusNdInspectIfConfigTable(1) type=0 + ruckusNdiIfConfigEntry(1) type=0 + ruckusNdiIfTrustValue(1) type=3 + ruckusNdiNDInspect(3) type=0 + ruckusNdiStaticNDInspectTable(1) type=0 + ruckusNdiStaticNDInspectEntry(1) type=0 + ruckusNdiStaticNDInspectIpv6Addr(1) type=2 hint=2x: + ruckusNdiStaticNDInspectMacAddr(2) type=2 hint=1x: + ruckusNdiStaticNDInspectType(3) type=3 + ruckusNdiStaticNDInspectState(4) type=3 + ruckusNdiStaticNDInspectAge(5) type=15 + ruckusNdiStaticNDInspectPort(6) type=16 hint=d + ruckusNdiStaticNDInspectRowStatus(7) type=3 + ruckusNdiConformance(2) type=0 + ruckusNdiCompliances(1) type=0 + ruckusNdiCompliance(1) type=26 + ruckusDhcpv6SnoopMIB(48) type=24 + ruckusDhcpv6SnoopNotify(0) type=0 + ruckusDhcpv6SnoopObjects(1) type=0 + ruckusDhcpv6SnoopGlobalObjects(1) type=0 + ruckusDhcpv6SnoopGlobalClearOper(1) type=3 + ruckusDhcpv6SnoopVlan(2) type=0 + ruckusDhcpv6SnoopVlanConfigTable(1) type=0 + ruckusDhcpv6SnoopVlanConfigEntry(1) type=0 + ruckusDhcpv6SnoopVlanConfigVLanId(1) type=15 hint=d + ruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable(2) type=3 + ruckusDhcpv6SnoopInterface(3) type=0 + ruckusDhcpv6SnoopIfConfigTable(1) type=0 + ruckusDhcpv6SnoopIfConfigEntry(1) type=0 + ruckusDhcpv6SnoopIfConfigTrustValue(1) type=3 + ruckusDhcpv6SnoopBind(4) type=0 + ruckusDhcpv6SnoopBindTable(1) type=0 + ruckusDhcpv6SnoopBindEntry(1) type=0 + ruckusDhcpv6SnoopBindMacAddr(1) type=2 hint=1x: + ruckusDhcpv6SnoopBindVlanId(2) type=15 hint=d + ruckusDhcpv6SnoopBindIpAddr(3) type=2 hint=2x: + ruckusDhcpv6SnoopBindType(4) type=3 + ruckusDhcpv6SnoopBindState(5) type=3 + ruckusDhcpv6SnoopBindPort(6) type=16 + ruckusDhcpv6SnoopBindClearOper(7) type=3 + ruckusDhcpv6SnoopConformance(2) type=0 + ruckusDhcpv6SnoopCompliances(1) type=0 + ruckusDhcpv6SnoopCompliance(1) type=26 + ruckusVxlanMIB(49) type=24 + ruckusVxlanObjects(1) type=0 + ruckusVxlanOverlayGateway(1) type=0 + ruckusVxlanOverlayGatewayTable(1) type=0 + ruckusVxlanOverlayGatewayEntry(1) type=0 + ruckusVxlanOverlayGatewayName(1) type=2 + ruckusVxlanOverlayGatewayType(2) type=3 + ruckusVxlanOverlayGatewayLoopbackId(3) type=16 + ruckusVxlanOverlayGatewayMappedVlans(4) type=16 + ruckusVxlanOverlayGatewayExtendedSites(5) type=16 + ruckusVxlanOverlayGatewayRowStatus(6) type=3 + ruckusVxlanOverlayGatewayVlanMapTable(2) type=0 + ruckusVxlanOverlayGatewayVlanMapEntry(1) type=0 + ruckusVxlanOverlayGatewayVlanMapVlanId(1) type=16 + ruckusVxlanOverlayGatewayVlanMapVniId(2) type=16 + ruckusVxlanOverlayGatewayVlanMapVfiId(3) type=16 + ruckusVxlanOverlayGatewayVlanMapCrossConnect(4) type=3 + ruckusVxlanOverlayGatewayVlanMapStatistics(5) type=3 + ruckusVxlanOverlayGatewayVlanMapAccessPortCount(6) type=16 + ruckusVxlanOverlayGatewayVlanMapExtendedSite(7) type=16 + ruckusVxlanOverlayGatewayVlanMapRowStatus(8) type=3 + ruckusVxlanOverlayGatewayVlanMapInUnicastPackets(9) type=11 + ruckusVxlanOverlayGatewayVlanMapInUnicastBytes(10) type=11 + ruckusVxlanOverlayGatewayVlanMapInMulticastPackets(11) type=11 + ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes(12) type=11 + ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets(13) type=11 + ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes(14) type=11 + ruckusVxlanOverlayGatewayVlanMapOutPackets(15) type=11 + ruckusVxlanOverlayGatewayVlanMapOutBytes(16) type=11 + ruckusVxlanOverlayGatewaySiteTable(3) type=0 + ruckusVxlanOverlayGatewaySiteEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteName(1) type=2 + ruckusVxlanOverlayGatewaySiteIpAddress(2) type=5 + ruckusVxlanOverlayGatewaySiteStatus(3) type=3 + ruckusVxlanOverlayGatewaySiteRowStatus(4) type=3 + ruckusVxlanOverlayGatewaySiteInUnicastPackets(5) type=11 + ruckusVxlanOverlayGatewaySiteInUnicastBytes(6) type=11 + ruckusVxlanOverlayGatewaySiteInMulticastPackets(7) type=11 + ruckusVxlanOverlayGatewaySiteInMutlticastBytes(8) type=11 + ruckusVxlanOverlayGatewaySiteInBroadcastPackets(9) type=11 + ruckusVxlanOverlayGatewaySiteInBroadcastBytes(10) type=11 + ruckusVxlanOverlayGatewaySiteOutPackets(11) type=11 + ruckusVxlanOverlayGatewaySiteOutBytes(12) type=11 + ruckusVxlanOverlayGatewaySiteMonitoring(13) type=3 + ruckusVxlanOverlayGatewaySiteKeepAlive(14) type=16 + ruckusVxlanOverlayGatewaySiteRetry(15) type=16 + ruckusVxlanOverlayGatewaySiteExtVlanTable(4) type=0 + ruckusVxlanOverlayGatewaySiteExtVlanEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteExtVlanId(1) type=16 + ruckusVxlanOverlayGatewaySiteExtVlanRowStatus(2) type=3 + ruckusVxlanOverlayGatewaySiteIpListTable(5) type=0 + ruckusVxlanOverlayGatewaySiteIpListEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteIpListIpIndex(1) type=16 + ruckusVxlanOverlayGatewaySiteIpListIpAddress(2) type=5 + ruckusVxlanOverlayGatewaySiteIpListRowStatus(3) type=3 + snL4(4) type=24 snL4Gen(1) type=0 snL4MaxSessionLimit(1) type=3 snL4TcpSynLimit(2) type=3 @@ -280438,7 +280942,7 @@ snL4slbFinished(12) type=16 snL4FreeSessionCount(13) type=16 snL4BackupInterface(14) type=3 - snL4BackupMacAddr(15) type=2 + snL4BackupMacAddr(15) type=2 hint=1x: snL4Active(16) type=3 snL4Redundancy(17) type=16 snL4Backup(18) type=3 @@ -280734,8 +281238,8 @@ snL4VirtualServerStatisticSymmetricKeep(10) type=16 snL4VirtualServerStatisticSymmetricActivates(11) type=6 snL4VirtualServerStatisticSymmetricInactives(12) type=6 - snL4VirtualServerStatisticSymmetricBestStandbyMacAddr(13) type=2 - snL4VirtualServerStatisticSymmetricActiveMacAddr(14) type=2 + snL4VirtualServerStatisticSymmetricBestStandbyMacAddr(13) type=2 hint=1x: + snL4VirtualServerStatisticSymmetricActiveMacAddr(14) type=2 hint=1x: snL4VirtualServerPortStatistic(26) type=0 snL4VirtualServerPortStatisticTable(1) type=0 snL4VirtualServerPortStatisticEntry(1) type=0 @@ -280845,7 +281349,7 @@ snStackSecSwitchPortCnts(3) type=3 snStackSecSwitchEnabled(4) type=3 snStackSecSwitchAck(5) type=3 - snStackSecSwitchMacAddr(6) type=2 + snStackSecSwitchMacAddr(6) type=2 hint=1x: snStackSecSwitchSyncCmd(7) type=3 snStackSecSwitchIpAddr(8) type=5 snStackSecSwitchSubnetMask(9) type=5 @@ -280868,12 +281372,14 @@ fdryRadiusServerEntry(1) type=0 fdryRadiusServerIndex(1) type=15 fdryRadiusServerAddrType(2) type=3 - fdryRadiusServerAddr(3) type=2 + fdryRadiusServerAddr(3) type=2 hint=1x fdryRadiusServerAuthPort(4) type=15 fdryRadiusServerAcctPort(5) type=15 fdryRadiusServerRowKey(6) type=2 hint=255a fdryRadiusServerUsage(7) type=3 fdryRadiusServerRowStatus(8) type=3 + fdryRadiusServerAuthType(9) type=2 + fdryRadiusServerPriority(10) type=15 fdryTacacs(9) type=0 fdryTacacsMIB(1) type=24 fdryTacacsServer(1) type=0 @@ -280881,7 +281387,7 @@ fdryTacacsServerEntry(1) type=0 fdryTacacsServerIndex(1) type=15 fdryTacacsServerAddrType(2) type=3 - fdryTacacsServerAddr(3) type=2 + fdryTacacsServerAddr(3) type=2 hint=1x fdryTacacsServerAuthPort(4) type=15 fdryTacacsServerRowKey(5) type=2 hint=255a fdryTacacsServerUsage(6) type=3 @@ -280893,7 +281399,7 @@ fdryTrapReceiverEntry(1) type=0 fdryTrapReceiverIndex(1) type=15 fdryTrapReceiverAddrType(2) type=3 - fdryTrapReceiverAddr(3) type=2 + fdryTrapReceiverAddr(3) type=2 hint=1x fdryTrapReceiverCommunityOrSecurityName(4) type=2 fdryTrapReceiverUDPPort(5) type=16 fdryTrapReceiverSecurityModel(6) type=3 @@ -281020,7 +281526,7 @@ snIpxCacheEntry(1) type=0 snIpxCacheIndex(1) type=16 snIpxCacheNetNum(2) type=2 - snIpxCacheNode(3) type=2 + snIpxCacheNode(3) type=2 hint=1x: snIpxCacheOutFilter(4) type=3 snIpxCacheEncap(5) type=3 snIpxCachePort(6) type=16 @@ -281029,7 +281535,7 @@ snIpxRouteEntry(1) type=0 snIpxRouteIndex(1) type=16 snIpxDestNetNum(2) type=2 - snIpxFwdRouterNode(3) type=2 + snIpxFwdRouterNode(3) type=2 hint=1x: snIpxDestHopCnts(4) type=16 snIpxRouteMetric(5) type=16 snIpxDestPort(6) type=16 @@ -281039,7 +281545,7 @@ snIpxServerIndex(1) type=16 snIpxServerType(2) type=16 snIpxServerNetNum(3) type=2 - snIpxServerNode(4) type=2 + snIpxServerNode(4) type=2 hint=1x: snIpxServerSocket(5) type=16 snIpxServerHopCnts(6) type=16 snIpxServerName(7) type=2 @@ -281050,9 +281556,9 @@ snIpxFwdFilterAction(2) type=3 snIpxFwdFilterSocket(3) type=16 snIpxFwdFilterSrcNet(4) type=2 - snIpxFwdFilterSrcNode(5) type=2 + snIpxFwdFilterSrcNode(5) type=2 hint=1x: snIpxFwdFilterDestNet(6) type=2 - snIpxFwdFilterDestNode(7) type=2 + snIpxFwdFilterDestNode(7) type=2 hint=1x: snIpxFwdFilterRowStatus(8) type=3 snIpxRipFilter(6) type=0 snIpxRipFilterTable(1) type=0 @@ -281110,7 +281616,7 @@ snIpxPortCountersTxDropPktsCnt(6) type=6 snIpxPortCountersRcvFiltPktsCnt(7) type=6 snIpxPortCountersTxFiltPktsCnt(8) type=6 - snIp(2) type=0 + snIp(2) type=24 snRtIpGeneral(1) type=0 snRtClearArpCache(1) type=3 snRtClearIpCache(2) type=3 @@ -281135,13 +281641,13 @@ snRtIpSourceRoute(21) type=3 snRtIpStaticRouteTable(2) type=0 snRtIpStaticRouteEntry(1) type=0 - snRtIpStaticRouteIndex(1) type=16 - snRtIpStaticRouteDest(2) type=5 - snRtIpStaticRouteMask(3) type=5 - snRtIpStaticRouteNextHop(4) type=5 - snRtIpStaticRouteMetric(5) type=16 - snRtIpStaticRouteRowStatus(6) type=3 - snRtIpStaticRouteDistance(7) type=3 + snRtIpStaticRouteDest(1) type=5 + snRtIpStaticRouteMask(2) type=5 + snRtIpStaticRouteNextHop(3) type=5 + snRtIpStaticRouteMetric(4) type=16 + snRtIpStaticRouteRowStatus(5) type=3 + snRtIpStaticRouteDistance(6) type=3 + snRtIpStaticRouteOutgoingInterface(7) type=16 hint=d snRtIpFilterTable(3) type=0 snRtIpFilterEntry(1) type=0 snRtIpFilterIndex(1) type=16 @@ -281215,6 +281721,18 @@ snRtUdpIfHelperAddr(2) type=5 snRtUdpIfHelperAddrType(3) type=3 snRtUdpIfHelperRowStatus(4) type=3 + snRtIpIfHelperTable(3) type=0 + snRtIpIfHelperEntry(1) type=0 + snRtIpIfHelperIfIndex(1) type=16 hint=d + snRtIpIfHelperAddrIndex(2) type=3 + snRtIpIfHelperAddr(3) type=5 + snRtIpIfHelperAddrType(4) type=3 + snRtIpIfHelperRowStatus(5) type=3 + snRtIpv6IfHelperTable(4) type=0 + snRtIpv6IfHelperEntry(1) type=0 + snRtIpv6IfHelperIfIndex(1) type=16 hint=d + snRtIpv6IfHelperAddr(2) type=2 + snRtIpv6IfHelperRowStatus(3) type=3 snRtIpTraceRoute(10) type=0 snRtIpTraceRouteGeneral(1) type=0 snRtIpTraceRouteTargetAddr(1) type=5 @@ -281423,7 +281941,6 @@ snRtIpPortIfEncap(3) type=3 snRtIpPortIfMetric(4) type=3 snRtIpPortIfDirBcastFwd(5) type=3 - snRtIpPortConfigIfDonorInterface(6) type=16 hint=d agIpPortCounterTable(21) type=0 agIpPortCounterEntry(1) type=0 agIpPortCounterIpVersion(1) type=3 @@ -281504,7 +282021,7 @@ snRtIpRipStatsRespFromNonRipPort(11) type=6 snRtIpRipStatsResponseFromLoopback(12) type=6 snRtIpRipStatsPacketRejected(13) type=6 - snOspf(4) type=0 + snOspf(4) type=24 snOspfGen(1) type=0 snOspfRouterId(1) type=5 snOspfAdminStat(2) type=3 @@ -281984,7 +282501,7 @@ snRtATAddZoneFilterPortIndex(1) type=16 snRtATAddZoneFilterAction(2) type=3 snRtATAddZoneFilterRtmpEnable(3) type=3 - snBgp4(11) type=0 + snBgp4(11) type=24 snBgp4Gen(1) type=0 snBgp4GenAlwaysCompareMed(1) type=3 snBgp4GenAutoSummary(2) type=3 @@ -282268,7 +282785,7 @@ snBgp4NeighPrefixGroupInAccessList(3) type=2 snBgp4NeighPrefixGroupOutAccessList(4) type=2 snBgp4NeighPrefixGroupRowStatus(5) type=3 - snVrrp(12) type=0 + snVrrp(12) type=24 snVrrpGlobal(1) type=0 snVrrpGroupOperMode(1) type=3 snVrrpIfStateChangeTrap(2) type=3 @@ -282357,7 +282874,7 @@ snVrrpVirRtr2AdvertiseBackup(26) type=3 snVrrpVirRtr2MasterIpAddr(27) type=5 snVrrpVirRtr2IpAddrCount(28) type=3 - snVrrpVirRtr2VirtualMacAddr(29) type=2 + snVrrpVirRtr2VirtualMacAddr(29) type=2 hint=1x: snLoopbackIf(13) type=0 snLoopbackIntfConfigTable(1) type=0 snLoopbackIntfConfigEntry(1) type=0 @@ -283299,6 +283816,21 @@ snFastIronStackICX7250Switch(1) type=0 snFastIronStackICX7250BaseL3Router(2) type=0 snFastIronStackICX7250Router(3) type=0 + snFastIronStackICX7150(10) type=0 + snFastIronStackICX7150Switch(1) type=0 + snFastIronStackICX7150Router(2) type=0 + snFastIronStackICX7650(11) type=0 + snFastIronStackICX7650Switch(1) type=0 + snFastIronStackICX7650Router(2) type=0 + snFastIronStackICX7850(12) type=0 + snFastIronStackICX7850Switch(1) type=0 + snFastIronStackICX7850Router(2) type=0 + snFastIronStackICX7550(13) type=0 + snFastIronStackICX7550Switch(1) type=0 + snFastIronStackICX7550Router(2) type=0 + snFastIronStackICX8200(14) type=0 + snFastIronStackICX8200Switch(1) type=0 + snFastIronStackICX8200Router(2) type=0 snCes2000Family(49) type=0 snCes2024F(1) type=0 snCes2024C(2) type=0 @@ -283306,8 +283838,6 @@ snCes2048C(4) type=0 snCes2048FX(5) type=0 snCes2048CX(6) type=0 - snCes2024F4X(7) type=0 - snCes2024C4X(8) type=0 snFLSLCFamily(50) type=0 snFLSLC624Family(1) type=0 snFLSLC624BaseFamily(1) type=0 @@ -283334,8 +283864,6 @@ snCer2048C(4) type=0 snCer2048FX(5) type=0 snCer2048CX(6) type=0 - snCer2024F4X(7) type=0 - snCer2024C4X(8) type=0 snFWSFamily(52) type=0 snFWS624Family(1) type=0 snFWS624BaseFamily(1) type=0 @@ -283431,15 +283959,6 @@ snFCX648BaseL3Router(2) type=0 snFCX648Router(3) type=0 snFCX648AdvRouter(4) type=0 - snBrocadeMLXeFamily(55) type=0 - snBrocadeMLXe16(1) type=0 - snBrocadeMLXe16Router(2) type=0 - snBrocadeMLXe8(2) type=0 - snBrocadeMLXe8Router(2) type=0 - snBrocadeMLXe4(3) type=0 - snBrocadeMLXe4Router(2) type=0 - snBrocadeMLXe32(4) type=0 - snBrocadeMLXe32Router(2) type=0 snICX6610Family(56) type=0 snICX661024Family(1) type=0 snICX661024BaseFamily(1) type=0 @@ -283623,6 +284142,136 @@ snFastIronSPX(1) type=0 snFastIronSPXSwitch(1) type=0 snFastIronSPXRouter(2) type=0 + snICX7150Family(64) type=0 + snICX715024Family(1) type=0 + snICX715024BaseFamily(1) type=0 + snICX715024(1) type=0 + snICX715024Switch(1) type=0 + snICX715024Router(2) type=0 + snICX715024POEFamily(2) type=0 + snICX715024POE(1) type=0 + snICX715024POESwitch(1) type=0 + snICX715024POERouter(2) type=0 + snICX715024FFamily(3) type=0 + snICX715024F(1) type=0 + snICX715024FSwitch(1) type=0 + snICX715024FRouter(2) type=0 + snICX715048Family(2) type=0 + snICX715048BaseFamily(1) type=0 + snICX715048(1) type=0 + snICX715048Switch(1) type=0 + snICX715048Router(2) type=0 + snICX715048POEFamily(2) type=0 + snICX715048POE(1) type=0 + snICX715048POESwitch(1) type=0 + snICX715048POERouter(2) type=0 + snICX715048POEFFamily(3) type=0 + snICX715048POEF(1) type=0 + snICX715048POEFSwitch(1) type=0 + snICX715048POEFRouter(2) type=0 + snICX715048ZPFamily(4) type=0 + snICX715048ZP(1) type=0 + snICX715048ZPSwitch(1) type=0 + snICX715048ZPRouter(2) type=0 + snICX7150C12POEFamily(3) type=0 + snICX7150C12POEBaseFamily(1) type=0 + snICX7150C12POE(1) type=0 + snICX7150C12POESwitch(1) type=0 + snICX7150C12POERouter(2) type=0 + snICX7150C10ZPFamily(4) type=0 + snICX7150C10ZPBaseFamily(1) type=0 + snICX7150C10ZP(1) type=0 + snICX7150C10ZPSwitch(1) type=0 + snICX7150C10ZPRouter(2) type=0 + snICX7150C08PFamily(5) type=0 + snICX7150C08PBaseFamily(1) type=0 + snICX7150C08P(1) type=0 + snICX7150C08PSwitch(1) type=0 + snICX7150C08PRouter(2) type=0 + snICX7650Family(65) type=0 + snICX765048Family(1) type=0 + snICX765048POEBaseFamily(1) type=0 + snICX765048POE(1) type=0 + snICX765048POESwitch(1) type=0 + snICX765048POERouter(2) type=0 + snICX765048FBaseFamily(2) type=0 + snICX765048F(1) type=0 + snICX765048FSwitch(1) type=0 + snICX765048FRouter(2) type=0 + snICX765048ZPBaseFamily(3) type=0 + snICX765048ZP(1) type=0 + snICX765048ZPSwitch(1) type=0 + snICX765048ZPRouter(2) type=0 + snICX7850Family(66) type=0 + snICX785048Family(1) type=0 + snICX785048FBaseFamily(1) type=0 + snICX785048F(1) type=0 + snICX785048FSwitch(1) type=0 + snICX785048FRouter(2) type=0 + snICX785048FSBaseFamily(2) type=0 + snICX785048FS(1) type=0 + snICX785048FSSwitch(1) type=0 + snICX785048FSRouter(2) type=0 + snICX785032QFamily(2) type=0 + snICX785032QBaseFamily(1) type=0 + snICX785032Q(1) type=0 + snICX785032QSwitch(1) type=0 + snICX785032QRouter(2) type=0 + snICX7550Family(67) type=0 + snICX755024Family(1) type=0 + snICX755024BaseFamily(1) type=0 + snICX755024(1) type=0 + snICX755024Switch(1) type=0 + snICX755024Router(2) type=0 + snICX755024POEFamily(2) type=0 + snICX755024POE(1) type=0 + snICX755024POESwitch(1) type=0 + snICX755024POERouter(2) type=0 + snICX755024FFamily(3) type=0 + snICX755024F(1) type=0 + snICX755024FSwitch(1) type=0 + snICX755024FRouter(2) type=0 + snICX755024ZPFamily(4) type=0 + snICX755024ZP(1) type=0 + snICX755024ZPSwitch(1) type=0 + snICX755024ZPRouter(2) type=0 + snICX755048Family(2) type=0 + snICX755048BaseFamily(1) type=0 + snICX755048(1) type=0 + snICX755048Switch(1) type=0 + snICX755048Router(2) type=0 + snICX755048POEFamily(2) type=0 + snICX755048POE(1) type=0 + snICX755048POESwitch(1) type=0 + snICX755048POERouter(2) type=0 + snICX755048FFamily(3) type=0 + snICX755048F(1) type=0 + snICX755048FSwitch(1) type=0 + snICX755048FRouter(2) type=0 + snICX755048ZPFamily(4) type=0 + snICX755048ZP(1) type=0 + snICX755048ZPSwitch(1) type=0 + snICX755048ZPRouter(2) type=0 + snICX8200Family(68) type=0 + snICX820024Family(1) type=0 + snICX820024Router(1) type=0 + snICX820024PRouter(2) type=0 + snICX820024ZPRouter(3) type=0 + snICX820024FRouter(4) type=0 + snICX820024FXRouter(5) type=0 + snICX820048Family(2) type=0 + snICX820048Router(1) type=0 + snICX820048PRouter(2) type=0 + snICX820048PFRouter(3) type=0 + snICX820048PF2Router(4) type=0 + snICX820048ZP2Router(5) type=0 + snICX820048FRouter(6) type=0 + snICX8200C08Family(3) type=0 + snICX8200C08PRouter(1) type=0 + snICX8200C08PDCRouter(2) type=0 + snICX8200C08PTRouter(3) type=0 + snICX8200C08PFRouter(4) type=0 + snICX8200C08ZPRouter(5) type=0 edgeIron(4) type=0 edgeIronMib(1) type=0 edgeIronType2(5) type=0 @@ -283968,8 +284617,6 @@ ironPointWireless(15) type=0 ironPointWirelessRFS(1) type=0 ironPointWirelessAP(2) type=0 - ethernetAccessSwitchFamily(16) type=0 - ethernetAccessSwitchBr6910(1) type=0 brcdEntityOIDMIB(17) type=24 brcdEntityOIDMIBObjects(1) type=0 brcdEntityOIDOther(1) type=0 @@ -284009,6 +284656,70 @@ brcdEntityOIDChassisMLXe8(2) type=0 brcdEntityOIDChassisMLXe16(3) type=0 brcdEntityOIDChassisMLXe32(4) type=0 + brcdEntityOIDChassisICX7250Family(7) type=0 + brcdEntityOIDChassisICX725024(1) type=0 + brcdEntityOIDChassisICX725024HPOE(2) type=0 + brcdEntityOIDChassisICX725024G(3) type=0 + brcdEntityOIDChassisICX725048(4) type=0 + brcdEntityOIDChassisICX725048HPOE(5) type=0 + brcdEntityOIDChassisICX7450Family(8) type=0 + brcdEntityOIDChassisICX745024(1) type=0 + brcdEntityOIDChassisICX745024HPOE(2) type=0 + brcdEntityOIDChassisICX745032ZP(3) type=0 + brcdEntityOIDChassisICX745048(4) type=0 + brcdEntityOIDChassisICX745048HPOE(5) type=0 + brcdEntityOIDChassisICX745048F(6) type=0 + brcdEntityOIDChassisICX7750Family(9) type=0 + brcdEntityOIDChassisICX775048C(1) type=0 + brcdEntityOIDChassisICX775048F(2) type=0 + brcdEntityOIDChassisICX775026Q(3) type=0 + brcdEntityOIDChassisICX7150Family(10) type=0 + brcdEntityOIDChassisICX715024(1) type=0 + brcdEntityOIDChassisICX715024POE(2) type=0 + brcdEntityOIDChassisICX715048(3) type=0 + brcdEntityOIDChassisICX715048POE(4) type=0 + brcdEntityOIDChassisICX715048POEF(5) type=0 + brcdEntityOIDChassisICX7150C12POE(6) type=0 + brcdEntityOIDChassisICX715048ZP(7) type=0 + brcdEntityOIDChassisICX715024F(8) type=0 + brcdEntityOIDChassisICX7150C10ZP(9) type=0 + brcdEntityOIDChassisICX7150C08P(10) type=0 + brcdEntityOIDChassisICX7150C08PT(11) type=0 + brcdEntityOIDChassisICX7650Family(11) type=0 + brcdEntityOIDChassisICX765048F(1) type=0 + brcdEntityOIDChassisICX765048P(2) type=0 + brcdEntityOIDChassisICX765048ZP(3) type=0 + brcdEntityOIDChassisICX7850Family(12) type=0 + brcdEntityOIDChassisICX785032Q(1) type=0 + brcdEntityOIDChassisICX785048F(2) type=0 + brcdEntityOIDChassisICX785048FS(3) type=0 + brcdEntityOIDChassisICX785048C(4) type=0 + brcdEntityOIDChassisICX7550Family(13) type=0 + brcdEntityOIDChassisICX755024(1) type=0 + brcdEntityOIDChassisICX755024F(2) type=0 + brcdEntityOIDChassisICX755024P(3) type=0 + brcdEntityOIDChassisICX755024ZP(4) type=0 + brcdEntityOIDChassisICX755048(5) type=0 + brcdEntityOIDChassisICX755048F(6) type=0 + brcdEntityOIDChassisICX755048P(7) type=0 + brcdEntityOIDChassisICX755048ZP(8) type=0 + brcdEntityOIDChassisICX8200Family(14) type=0 + brcdEntityOIDChassisICX820024(1) type=0 + brcdEntityOIDChassisICX820024F(2) type=0 + brcdEntityOIDChassisICX820024FX(3) type=0 + brcdEntityOIDChassisICX820024P(4) type=0 + brcdEntityOIDChassisICX820024ZP(5) type=0 + brcdEntityOIDChassisICX820048(6) type=0 + brcdEntityOIDChassisICX820048F(7) type=0 + brcdEntityOIDChassisICX820048P(8) type=0 + brcdEntityOIDChassisICX820048PF(9) type=0 + brcdEntityOIDChassisICX820048PF2(10) type=0 + brcdEntityOIDChassisICX820048ZP2(11) type=0 + brcdEntityOIDChassisICX8200C08P(12) type=0 + brcdEntityOIDChassisICX8200C08PF(13) type=0 + brcdEntityOIDChassisICX8200C08PT(14) type=0 + brcdEntityOIDChassisICX8200C08PDC(15) type=0 + brcdEntityOIDChassisICX8200C08ZP(16) type=0 brcdEntityOIDBackplane(4) type=0 brcdEntityOIDBackplaneUnknown(1) type=0 brcdEntityOIDBackplaneNetIronFamily(2) type=0 @@ -284041,6 +284752,10 @@ brcdEntityOIDPowerSupplyDC2400W(13) type=0 brcdEntityOIDPowerSupplyAC3000W(14) type=0 brcdEntityOIDPowerSupplyDC3000W(15) type=0 + brcdEntityOIDPowerSupplyACPOE(16) type=0 + brcdEntityOIDPowerSupplyACRegular(17) type=0 + brcdEntityOIDPowerSupplyDCPOE(18) type=0 + brcdEntityOIDPowerSupplyDCRegular(19) type=0 brcdEntityOIDFan(7) type=0 brcdEntityOIDFanUnknown(1) type=0 brcdEntityOIDChassisFanTray(2) type=0 @@ -284063,6 +284778,70 @@ brcdEntityOIDModuleMgmtBrMlxMr2X(2) type=0 brcdEntityOIDModuleMgmtBrMlx32Mr2M(3) type=0 brcdEntityOIDModuleMgmtBrMlx32Mr2X(4) type=0 + brcdEntityOIDModuleMgmtIcx7250Family(4) type=0 + brcdEntityOIDModuleMgmtIcx7250624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7250648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7250624GBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7250624PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7250648PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7450Family(5) type=0 + brcdEntityOIDModuleMgmtIcx7450624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7450648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7450648FBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7450624PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7450648PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7450632ZPBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7750Family(6) type=0 + brcdEntityOIDModuleMgmtIcx775048CBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx775048FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx775026QBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx775020QBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7150Family(7) type=0 + brcdEntityOIDModuleMgmtIcx7150624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7150648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7150624PoeBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7150648PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7150648PoeFBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7150612CPoeBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7150648ZPBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx7150624FBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx7150C10ZPBaseModule(9) type=0 + brcdEntityOIDModuleMgmtIcx7150C08PBaseModule(10) type=0 + brcdEntityOIDModuleMgmtIcx7150C08PTBaseModule(11) type=0 + brcdEntityOIDModuleMgmtIcx7650Family(8) type=0 + brcdEntityOIDModuleMgmtIcx7650648FBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7650648PoeBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7650648ZPBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7850Family(9) type=0 + brcdEntityOIDModuleMgmtIcx7850632QBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7850648FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7850648FSBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7550Family(10) type=0 + brcdEntityOIDModuleMgmtIcx7550624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7550648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7550624FBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7550648FBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7550624PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7550648PoeBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7550624ZPBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx7550648ZPBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx8200Family(11) type=0 + brcdEntityOIDModuleMgmtIcx8200624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx8200624FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx8200624FXBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx8200624PBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx8200624ZPBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx8200648BaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx8200648FBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx8200648PBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx8200648PFBaseModule(9) type=0 + brcdEntityOIDModuleMgmtIcx8200648PF2BaseModule(10) type=0 + brcdEntityOIDModuleMgmtIcx8200648ZP2BaseModule(11) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PBaseModule(12) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PDCBaseModule(13) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PFBaseModule(14) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PTBaseModule(15) type=0 + brcdEntityOIDModuleMgmtIcx82006C08ZPBaseModule(16) type=0 brcdEntityOIDModuleSfm(3) type=0 brcdEntityOIDModuleSfmUnknown(1) type=0 brcdEntityOIDModuleSfmNetIronFamily(2) type=0 @@ -284110,6 +284889,48 @@ brcdEntityOIDModuleOpticsCFP(5) type=0 brcdEntityOIDModuleOpticsQSFPP(6) type=0 brcdEntityOIDModuleOpticsCFP2(7) type=0 + brcdEntityOIDModuleOpticsGBIC(8) type=0 + brcdEntityOIDModuleService(6) type=0 + brcdEntityOIDModuleServiceUnknown(1) type=0 + brcdEntityOIDModuleServiceIcx7250Family(2) type=0 + brcdEntityOIDModuleServiceIcx7250sfpplus8Port80gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7250sfpplus4Port4gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7450Family(3) type=0 + brcdEntityOIDModuleServiceIcx7400sfpplus4Port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7400copper4Port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7400sfp4Port4gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7400qsfpplus1Port40gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7400ServiceModule(5) type=0 + brcdEntityOIDModuleServiceIcx7750Family(4) type=0 + brcdEntityOIDModuleServiceIcx7750QSFP6port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx77506Q6port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7150Family(5) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus2Port20gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus4Port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7150gc2Port2gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus8Port80gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7150gsfp2Port2gModule(5) type=0 + brcdEntityOIDModuleServiceIcx7150gc2Port20gModule(6) type=0 + brcdEntityOIDModuleServiceIcx7650Family(6) type=0 + brcdEntityOIDModuleServiceIcx7600xgf4Port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7600qsfp2port80gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7600100g1port100gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7650qsfp4port160gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7650100g2port200gModule(5) type=0 + brcdEntityOIDModuleServiceIcx7650qsfp2port80gModule(6) type=0 + brcdEntityOIDModuleServiceIcx7850Family(7) type=0 + brcdEntityOIDModuleServiceIcx78508port800gModule(1) type=0 + brcdEntityOIDModuleServiceIcx785012port1200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7550Family(8) type=0 + brcdEntityOIDModuleServiceIcx75502port80gModule(1) type=0 + brcdEntityOIDModuleServiceIcx75502port200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx8200Family(9) type=0 + brcdEntityOIDModuleServiceIcx82004Port100gModule(1) type=0 + brcdEntityOIDModuleServiceIcx82008Port200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx82002Port2gModule(3) type=0 + brcdEntityOIDModuleServiceIcx82002Port20gModule(4) type=0 + brcdEntityOIDModuleServiceIcx82002Port50gModule(5) type=0 + brcdEntityOIDModuleServiceIcx82002Port20gcfModule(6) type=0 brcdEntityOIDPort(10) type=0 brcdEntityOIDPortUnknown(1) type=0 brcdEntityOIDPortMgmtSerial(2) type=0 @@ -284122,8 +284943,23 @@ brcdEntityOIDPort40GigBaseFx(9) type=0 brcdEntityOIDPort100GigBaseFx(10) type=0 brcdEntityOIDPort10GigBaseTx(11) type=0 + brcdEntityOIDPort25GigBaseTx(12) type=0 + brcdEntityOIDPort40GigBaseTx(13) type=0 + brcdEntityOIDPort2500BaseTx(14) type=0 + brcdEntityOIDPort5GigBaseTx(15) type=0 brcdEntityOIDStack(11) type=0 brcdEntityOIDStackUnknown(1) type=0 + brcdEntityOIDStackICXStackFamily(2) type=0 + brcdEntityOIDStackICXStackIcx7250(1) type=0 + brcdEntityOIDStackICXStackIcx7450(2) type=0 + brcdEntityOIDStackICXStackIcx7750(3) type=0 + brcdEntityOIDStackICXStackIcx7150(4) type=0 + brcdEntityOIDStackICXStackIcx7650(5) type=0 + brcdEntityOIDStackICXStackIcx7850(6) type=0 + brcdEntityOIDStackICXStackIcx7550(7) type=0 + brcdEntityOIDStackICXStackIcx8200(8) type=0 + brcdEntityOIDStackICXSPXFamily(3) type=0 + brcdEntityOIDStackICXSPX(1) type=0 brcdEntityOIDCpu(12) type=0 brcdEntityOIDCpuUnknown(1) type=0 brcdEntityOIDCpuPPC7447A(2) type=0 diff --git a/EXTRAS/reports/foundry b/EXTRAS/reports/foundry index 7a2070f06..9fcd8241f 100644 --- a/EXTRAS/reports/foundry +++ b/EXTRAS/reports/foundry @@ -2818,7 +2818,7 @@ vdx8770S16(1002) type=0 foundry(1991) type=0 foundry#(0) type=20 - snTraps(0) type=0 + snTraps(0) type=24 snTrapChasPwrSupply(1) type=21 snTrapLockedAddressViolation(2) type=21 snTrapOspfIfStateChange(3) type=21 @@ -2990,10 +2990,6 @@ snTrapLicenseExpires(189) type=21 snTrapLicenseExpired(190) type=21 snTrapUDLDCrcFailureDetected(191) type=21 - snTrapDot1agCfmRemoteMEPAgeOut(192) type=21 - snTrapDot1agCfmRemoteMEPUp(193) type=21 - snTrapDot1agCfmDomainCrossConnection(194) type=21 - snTrapDot1agCfmDuplicateMEPId(195) type=21 snTrapStackingStandbyElected(196) type=21 snTrapMacMoveThresholdRate(197) type=21 snTrapMacMoveIntervalHistory(198) type=21 @@ -3009,6 +3005,27 @@ snTrapLicenseNNLLDelete(208) type=21 snTrapStackingShowStackConnect(209) type=21 snTrapStackingStandByChangedStandalone(210) type=21 + snTrapBroadcastlimit(211) type=21 + snTrapMulticastlimit(212) type=21 + snTrapUnicastlimit(213) type=21 + snTrapPsuFanStateChange(214) type=21 + snTrapStackISSUSystemCompleted(215) type=21 + snTrapStackISSUSystemFailed(216) type=21 + snTrapStackISSUUnitCompleted(217) type=21 + snTrapStackISSUUnitFailed(218) type=21 + snTrapStackISSUSystemStart(219) type=21 + snTrapStackingIgnoreShutdownTemperatureThresholdEnabled(220) type=21 + snTrapStackingIgnoreShutdownTemperatureThresholdDisabled(221) type=21 + snTrapGlobalBattleShortModeEnabled(222) type=21 + snTrapGlobalBattleShortModeDisabled(223) type=21 + snTrapStackSAUOptionChange(224) type=21 + snTrapPMSProtectActivated(225) type=21 + snTrapPMSProtectDeactivated(226) type=21 + snTrapStackSAUOptionDeleted(227) type=21 + snTrapStackCloudManagerConnected(228) type=21 + snTrapStackCloudManagerDisconnected(229) type=21 + snTrapManager2FactorAuthenticationEnabled(230) type=21 + snTrapManager2FactorAuthenticationDisabled(231) type=21 snTrapChasFanOK(1000) type=21 snTrapTemperatureOK(1001) type=21 snTrapCAMOverflow(1002) type=21 @@ -3028,46 +3045,19 @@ snTrapXfpSfpNotFoundryOptics(1018) type=21 snTrapTMRecoverySlotReset(1019) type=21 snTrapTMEgressDataError(1020) type=21 - snTrapSFMLoggingRestart(1021) type=21 - snTrapNotEnoughFapLinks(1035) type=21 snTrapSFMLinkDown(1100) type=21 snTrapSFMLinkUp(1101) type=21 snTrapSFMAccessError(1102) type=21 - snTrapSFMStatusChange(1103) type=21 - snTrapLPFabricStatusChange(1104) type=21 - snTrapModuleNPLockupIndication(1105) type=21 - snTrapModuleNPLockupThresholdExceeded(1106) type=21 - snTrapSFMAutoTuneStart(1107) type=21 - snTrapSFMAutoTuneFails(1108) type=21 - snTrapSFMAutoTuneComplete(1109) type=21 - snTrapTMAutoTuneStart(1110) type=21 - snTrapTMAutoTuneFails(1111) type=21 - snTrapTMAutoTuneComplete(1112) type=21 - snTrapNPILKNCRCError(1113) type=21 - snTrapARPMACMovement(1114) type=21 snTrapChassisFanSpeedLow(1200) type=21 snTrapChassisFanSpeedMedium(1201) type=21 snTrapChassisFanSpeedMedHigh(1202) type=21 snTrapChassisFanSpeedHigh(1203) type=21 - fdryTrapLagDeployed(1204) type=21 - fdryTrapLagUndeployed(1205) type=21 snTrapFIPSModeEnable(1207) type=21 snTrapFIPSModeDisable(1208) type=21 snTrapFIPSHostZeroized(1209) type=21 snTrapFIPSSharedSecretZeroized(1210) type=21 snTrapFIPSPOSTStatus(1211) type=21 snTrapFIPSCryptoModuleFailure(1212) type=21 - snTrapLicense2PortNotSupported(1213) type=21 - snTrapOpticalMonitoringOK(1214) type=21 - snTrapSFMAccessOK(1215) type=21 - snTrapUpgradeSingleCmdStart(1216) type=21 - snTrapUpgradeSingleCmdDone(1217) type=21 - snTrapAutoUpgradeStart(1218) type=21 - snTrapAutoUpgradeDone(1219) type=21 - snTrapTcamParityError(1220) type=21 - snTrapLPResetOnTcamError(1221) type=21 - snTrapSTPRootGuardViolation(1230) type=21 - snTrapRSTPRootGuardViolation(1231) type=21 products(1) type=0 switch(1) type=0 snChassis(1) type=0 @@ -3098,9 +3088,7 @@ snChasNumSlots(24) type=16 snChasArchitectureType(25) type=3 snChasProductType(26) type=3 - snChasSystemMode(27) type=3 - snChasFactoryPartNumber(28) type=2 - snChasFactorySerialNumber(29) type=2 + snChasGlobalIgnoreShutdownTemperature(30) type=3 snChasPwr(2) type=0 snChasPwrSupplyTable(1) type=0 snChasPwrSupplyEntry(1) type=0 @@ -3135,6 +3123,8 @@ snChasUnitWarningTemperature(5) type=3 snChasUnitShutdownTemperature(6) type=3 snChasUnitPartNum(7) type=2 + snChasUnitIgnoreShutdownTemperature(8) type=3 + snChasUnitFanless(9) type=3 snAgentSys(2) type=0 snAgentGbl(1) type=0 snAgReload(1) type=3 @@ -3171,7 +3161,7 @@ snAgGblExcessiveErrorWarning(34) type=3 snAgGblCpuUtilData(35) type=7 snAgGblCpuUtilCollect(36) type=3 - snAgGblTelnetTimeout(37) type=16 + snAgGblTelnetTimeout(37) type=3 snAgGblEnableWebMgmt(38) type=3 snAgGblSecurityLevelBinding(39) type=16 snAgGblEnableSLB(40) type=3 @@ -3188,21 +3178,26 @@ snAgGblCpuUtil5SecAvg(51) type=7 snAgGblCpuUtil1MinAvg(52) type=7 snAgGblDynMemUtil(53) type=7 - snAgGblDynMemTotal(54) type=16 + snAgGblDynMemTotal(54) type=7 snAgGblDynMemFree(55) type=7 snAgImgLoadSPModuleType(56) type=3 snAgImgLoadSPModuleNumber(57) type=16 snAgTrapHoldTime(58) type=3 snAgSFlowSourceInterface(59) type=16 hint=d - snAgGblTelnetLoginTimeout(60) type=16 + snAgGblTelnetLoginTimeout(60) type=3 snAgGblBannerExec(61) type=2 snAgGblBannerIncoming(62) type=2 snAgGblBannerMotd(63) type=2 snAgWebMgmtServerTcpPort(64) type=3 snAgTftpServerAddrType(65) type=3 snAgTftpServerAddr(66) type=2 - snAgGblDeleteFirstBeforeDownload(67) type=3 snAgGblPasswordCheckMode(68) type=3 + snAgGblEnableTelnetAuthentication(69) type=3 + snAgGblManager2FactorAuthentication(70) type=3 + snAgDefGwayIpv6(71) type=2 hint=2x: + snAgEraseConfig(72) type=3 + snAgSaveConfig(73) type=3 + snAgGblFirmWareDownLoadState(74) type=3 snAgentBrd(2) type=0 snAgentBrdTable(1) type=0 snAgentBrdEntry(1) type=0 @@ -3233,8 +3228,6 @@ snAgentBrdMemoryAvailable(25) type=11 snAgentBrdSerialNumber(26) type=2 snAgentBrdPartNumber(27) type=2 - snAgentBrdMemoryUtil100thPercent(28) type=15 - snAgentBrdUpTime(29) type=8 snAgentBrd2Table(2) type=0 snAgentBrd2Entry(1) type=0 snAgentBrd2Unit(1) type=16 @@ -3376,7 +3369,6 @@ snCpuProcess5MinUtil(4) type=7 snCpuProcess15MinUtil(5) type=7 snCpuProcessRuntime(6) type=6 - snAgentCpuProcessEnable(3) type=3 snAgentHw(12) type=0 snAgentHwICBMCounterTable(1) type=0 snAgentHwICBMCounterEntry(1) type=0 @@ -3460,7 +3452,14 @@ snAgentTemp2SensorId(3) type=16 snAgentTemp2SensorDescr(4) type=2 snAgentTemp2Value(5) type=3 - snAgentPoe(14) type=0 + snAgentTempThreshold2Table(4) type=0 + snAgentTempThreshold2Entry(1) type=0 + snAgentTempThreshold2UnitNum(1) type=3 + snAgentTempThreshold2Rule(2) type=3 + snAgentTempThreshold2LowValue(3) type=3 + snAgentTempThreshold2HighValue(4) type=3 + snAgentTempThreshold2ShutdownValue(5) type=3 + snAgentPoe(14) type=24 snAgentPoeGbl(1) type=0 snAgentPoeGblPowerCapacityTotal(1) type=15 snAgentPoeGblPowerCapacityFree(2) type=15 @@ -3475,6 +3474,15 @@ snAgentPoePortPriority(5) type=3 snAgentPoePortConsumed(6) type=16 snAgentPoePortType(7) type=2 hint=255a + snAgentPoePortPDClass(8) type=16 + snAgentPoePortPDClassB(9) type=16 + snAgentPoePortlldpReqPwr(10) type=16 + snAgentPoePortlldpReqPwrA(11) type=16 + snAgentPoePortlldpReqPwrB(12) type=16 + snAgentPoePortCapability(13) type=3 + snAgentPoePortMax2PairPwr(14) type=16 + snAgentPoePortMax4PairPwr(15) type=16 + snAgentPoePortMode(16) type=3 snAgentPoeModule(3) type=0 snAgentPoeModuleTable(1) type=0 snAgentPoeModuleEntry(1) type=0 @@ -3488,6 +3496,7 @@ snAgentPoeUnitPowerCapacityTotal(2) type=15 snAgentPoeUnitPowerCapacityFree(3) type=15 snAgentPoeUnitPowerAllocationsRequestsHonored(4) type=15 + snAgentPoePwrAllocationType(5) type=3 snAgentLicense(15) type=0 fdryLicenseTable(1) type=0 fdryLicenseEntry(1) type=0 @@ -3505,61 +3514,24 @@ fdryLicenseMode(12) type=3 fdryLicenseSerialNumber(13) type=2 fdryLicenseCapacity(14) type=16 - fdryLicensedFeatureInfo(2) type=12 brcdPortLicenseTable(3) type=0 brcdPortLicenseEntry(1) type=0 brcdPortLicenseIndex(1) type=16 hint=d brcdPortLicenseStatus(2) type=3 - brcdSw(16) type=0 - brcdSwPackageGroup(1) type=0 - brcdSwPackageUpgrade(1) type=0 - brcdSwPackageFname(1) type=2 - brcdSwPackageLoad(2) type=3 - brcdSwPackageLoadStatus(3) type=3 - brcdSwPackageUpgradeAllImages(4) type=3 - brcdSwPackageUpgradeResultTable(5) type=0 - brcdSwPackageUpgradeResultEntry(1) type=0 - brcdSwPackageUpgradeResultIndex(1) type=15 - brcdSwPackageUpgradeResultImageType(2) type=3 - brcdSwPackageUpgradeResultStatus(3) type=3 - brcdSwPackageUpgradeResultTimeStamp(4) type=8 - brcdSwPackageUpgradeResultDescription(5) type=2 - brcdSwPackageUpgradeSkipVersionCheck(6) type=3 - brcdSwIntfModAutoUpgrade(2) type=0 - brcdSwIntfModAutoUpgradeMode(1) type=3 - brcdSwIntfModAutoUpgradeTftpAddrType(2) type=3 - brcdSwIntfModAutoUpgradeTftpAddr(3) type=2 - brcdSwIntfModAutoUpgradeSrcPath(4) type=2 - brcdSwIntfModAutoUpgradeAllImages(5) type=3 - snAgentTask(17) type=0 - snAgentTaskCpuTable(1) type=0 - snAgentTaskCpuEntry(1) type=0 - snAgentTaskCpuTaskID(1) type=16 - snAgentTaskCpuTaskName(2) type=2 - snAgentTaskCpuState(3) type=2 - snAgentTaskCpuWaitTime(4) type=7 - snAgentTaskCpuHoldTime(5) type=7 - snAgentTaskCpuTaskActivity(6) type=2 - snAgentTaskMQTable(2) type=0 - snAgentTaskMQEntry(1) type=0 - snAgentTaskMQTaskID(1) type=16 - snAgentTaskMQPriority(2) type=16 - snAgentTaskMQTaskName(3) type=2 - snAgentTaskMQLength(4) type=16 - snAgentTaskMQDepth(5) type=7 - snAgentTaskMQMaxDepth(6) type=6 - snAgentTaskMQStickyMaxDepth(7) type=6 - snAgentTaskMQMsgs(8) type=7 - snAgentTaskMQMaxMsgs(9) type=6 - snAgentTaskMQStickyMaxMsgs(10) type=6 - snAgentTaskMQFailedCount(11) type=7 - snAgentTaskMQStickyFailedCount(12) type=6 - snAgentTaskBufferTable(3) type=0 - snAgentTaskBufferEntry(1) type=0 - snAgentTaskBufferTaskID(1) type=16 - snAgentTaskBufferPoolID(2) type=16 - snAgentTaskBufferTaskName(3) type=2 - snAgentTaskBufferCount(4) type=7 + snSAULicenseUnitTable(4) type=0 + snSAULicenseUnitEntry(1) type=0 + snSAULicenseUnitIndex(1) type=16 + snSAULicensePackageName(2) type=2 + snSAUIsPremLicensePresent(3) type=3 + snSAUIsPoDLicensePresent(4) type=3 + snSAUPoDLicensedSpeed(5) type=3 + snSAUPoDLicensedPorts(6) type=16 + snSAUIsMACSecLicensePresent(7) type=3 + snSAUPremSerialNumber(8) type=2 + snSAUPoDSerialNumber(9) type=2 + snSAUMACsecSerialNumber(10) type=2 + snSAUICX7150SerialNumber(11) type=2 + snSAUICX8200SerialNumber(12) type=2 snSwitch(3) type=0 snSwInfo(1) type=0 snSwGroupOperMode(1) type=3 @@ -3578,7 +3550,7 @@ snSwGlobalStpMode(14) type=3 snSwIpMcastQuerierMode(15) type=3 snSwViolatorPortNumber(17) type=16 - snSwViolatorMacAddress(18) type=2 + snSwViolatorMacAddress(18) type=2 hint=1x: snVLanGroupVlanMaxEntry(19) type=16 snSwEosBufferSize(20) type=16 snVLanByPortEntrySize(21) type=16 @@ -3605,7 +3577,13 @@ snSwFastStpMode(42) type=3 snSwViolatorIfIndex(43) type=16 snSwSingleStpVLanId(44) type=16 - snSwBroadcastLimit2(45) type=15 + snSwJumboMode(45) type=3 + snSwACLPerPortPerVlanMode(46) type=3 + snSwIpMcastVersion(47) type=16 + snSwMgmtVlan(48) type=16 + snSwErrDisableRecoveryTimeout(49) type=15 + snSwErrDisableRecoveryCause(50) type=15 + snSwFwdProfileNumber(51) type=3 snVLanInfo(2) type=0 snVLanByPortTable(1) type=0 snVLanByPortEntry(1) type=0 @@ -3632,7 +3610,7 @@ snVLanByPortStpRootCost(21) type=16 snVLanByPortStpRootPort(22) type=16 snVLanByPortStpDesignatedRoot(23) type=2 - snVLanByPortBaseBridgeAddress(24) type=2 + snVLanByPortBaseBridgeAddress(24) type=2 hint=1x: snVLanByPortVLanName(25) type=2 snVLanByPortRouterIntf(26) type=16 snVLanByPortChassisPortMask(27) type=2 @@ -3726,30 +3704,15 @@ snVLanByPortCfgStpRootCost(17) type=16 snVLanByPortCfgStpRootPort(18) type=16 snVLanByPortCfgStpDesignatedRoot(19) type=2 - snVLanByPortCfgBaseBridgeAddress(20) type=2 + snVLanByPortCfgBaseBridgeAddress(20) type=2 hint=1x: snVLanByPortCfgVLanName(21) type=2 snVLanByPortCfgRouterIntf(22) type=16 snVLanByPortCfgRowStatus(23) type=3 snVLanByPortCfgStpVersion(24) type=3 snVLanByPortCfgInOctets(25) type=11 - snVLanByPortCfgTransparentHwFlooding(26) type=3 - brcdVlanExtStatsTable(8) type=0 - brcdVlanExtStatsEntry(1) type=0 - brcdVlanExtStatsVlanId(1) type=16 hint=d - brcdVlanExtStatsIfIndex(2) type=16 hint=d - brcdVlanExtStatsPriorityId(3) type=3 - brcdVlanExtStatsInSwitchedPkts(4) type=11 - brcdVlanExtStatsInRoutedPkts(5) type=11 - brcdVlanExtStatsInPkts(6) type=11 - brcdVlanExtStatsOutSwitchedPkts(7) type=11 - brcdVlanExtStatsOutRoutedPkts(8) type=11 - brcdVlanExtStatsOutPkts(9) type=11 - brcdVlanExtStatsInSwitchedOctets(10) type=11 - brcdVlanExtStatsInRoutedOctets(11) type=11 - brcdVlanExtStatsInOctets(12) type=11 - brcdVlanExtStatsOutSwitchedOctets(13) type=11 - brcdVlanExtStatsOutRoutedOctets(14) type=11 - brcdVlanExtStatsOutOctets(15) type=11 + snVLanByPortCfgMcastMode(26) type=3 + snVLanByPortCfgMcastVersion(27) type=16 + snVLanByPortCfgLoopDetectionMode(28) type=3 snSwPortInfo(3) type=0 snSwPortInfoTable(1) type=0 snSwPortInfoEntry(1) type=0 @@ -3763,7 +3726,7 @@ snSwPortInfoAdminStatus(8) type=3 snSwPortInfoLinkStatus(9) type=3 snSwPortInfoPortQos(10) type=3 - snSwPortInfoPhysAddress(11) type=2 + snSwPortInfoPhysAddress(11) type=2 hint=1x: snSwPortStatsInFrames(12) type=6 snSwPortStatsOutFrames(13) type=6 snSwPortStatsAlignErrors(14) type=6 @@ -3855,7 +3818,7 @@ snSwIfInfoAdminStatus(10) type=3 snSwIfInfoLinkStatus(11) type=3 snSwIfInfoPortQos(12) type=3 - snSwIfInfoPhysAddress(13) type=2 + snSwIfInfoPhysAddress(13) type=2 hint=1x: snSwIfLockAddressCount(14) type=3 snSwIfStpPortEnable(15) type=3 snSwIfDhcpGateListId(16) type=3 @@ -3902,9 +3865,18 @@ snSwIfStatsOutJumboFrames(57) type=11 snSwIfInfoMirrorMode(58) type=3 snSwIfMacLearningDisable(59) type=3 - snSwIfInfoL2FowardEnable(60) type=3 - snSwIfInfoAllowAllVlan(61) type=3 - snSwIfInfoNativeMacAddress(62) type=2 + snSwIfInfoNativeMacAddress(62) type=2 hint=1x: + snSwIfQosMonitorDropCounterMode(63) type=3 + snSwIfLRMAdapterPresent(64) type=3 + snSwIfStpBPDUGuardMode(65) type=3 + snSwIfStpRootGuardMode(66) type=3 + snSwIfRstpAdminEdgePortMode(67) type=3 + snSwIfInfoClockMode(68) type=3 + snSwIfProtectedMode(69) type=3 + snSwIfTrustDscpMode(70) type=3 + snSwIfVoiceVlanId(71) type=16 + snSwIfPortLoopDetectionMode(72) type=3 + snSWIfErrDisableStatus(73) type=3 snIfOpticalMonitoringInfoTable(6) type=0 snIfOpticalMonitoringInfoEntry(1) type=0 snIfOpticalMonitoringTemperature(1) type=2 @@ -3933,6 +3905,7 @@ snIfOpticalLaneMonitoringTxPower(3) type=2 snIfOpticalLaneMonitoringRxPower(4) type=2 snIfOpticalLaneMonitoringTxBiasCurrent(5) type=2 + snIfOpticalLaneMonitoringVoltage(6) type=2 brcdIfEgressCounterInfoTable(11) type=0 brcdIfEgressCounterInfoEntry(1) type=0 brcdIfEgressCounterIfIndex(1) type=16 hint=d @@ -3940,11 +3913,20 @@ brcdIfEgressCounterType(3) type=3 brcdIfEgressCounterPkts(4) type=11 brcdIfEgressCounterDropPkts(5) type=11 + snSwIfInfoLimitTable(12) type=0 + snSwIfInfoLimitEntry(1) type=0 + snSwIfInfoLimitType(1) type=3 + snSwIfInfoLimitPkts(2) type=15 + snSwIfInfoLimitBits(3) type=15 units=KBPS + snSwIfInfoLimitThreshold(4) type=15 + snSwIfInfoLimitShutdownTime(5) type=15 units=seconds + snSwIfInfoLimitLog(6) type=3 + snSwIfInfoLimitRowStatus(7) type=3 snFdbInfo(4) type=0 snFdbTable(1) type=0 snFdbEntry(1) type=0 snFdbStationIndex(1) type=3 - snFdbStationAddr(2) type=2 + snFdbStationAddr(2) type=2 hint=1x: snFdbStationPort(3) type=16 snFdbVLanId(4) type=3 snFdbStationQos(5) type=3 @@ -4028,10 +4010,10 @@ snMacFilterEntry(1) type=0 snMacFilterIndex(1) type=16 snMacFilterAction(2) type=3 - snMacFilterSourceMac(3) type=2 - snMacFilterSourceMask(4) type=2 - snMacFilterDestMac(5) type=2 - snMacFilterDestMask(6) type=2 + snMacFilterSourceMac(3) type=2 hint=1x: + snMacFilterSourceMask(4) type=2 hint=1x: + snMacFilterDestMac(5) type=2 hint=1x: + snMacFilterDestMask(6) type=2 hint=1x: snMacFilterOperator(7) type=3 snMacFilterFrameType(8) type=3 snMacFilterFrameTypeNum(9) type=3 @@ -4106,29 +4088,36 @@ snQosBindProfileIndex(3) type=3 snDosAttack(3) type=0 snDosAttackGlobal(1) type=0 - snDosAttackICMPDropCount(1) type=6 - snDosAttackICMPBlockCount(2) type=6 - snDosAttackSYNDropCount(3) type=6 - snDosAttackSYNBlockCount(4) type=6 + snDosAttackICMPDropCount(1) type=11 + snDosAttackICMPBlockCount(2) type=11 + snDosAttackSYNDropCount(3) type=11 + snDosAttackSYNBlockCount(4) type=11 snDosAttackPortTable(2) type=0 snDosAttackPortEntry(1) type=0 snDosAttackPort(1) type=16 - snDosAttackPortICMPDropCount(2) type=6 - snDosAttackPortICMPBlockCount(3) type=6 - snDosAttackPortSYNDropCount(4) type=6 - snDosAttackPortSYNBlockCount(5) type=6 + snDosAttackPortICMPDropCount(2) type=11 + snDosAttackPortICMPBlockCount(3) type=11 + snDosAttackPortSYNDropCount(4) type=11 + snDosAttackPortSYNBlockCount(5) type=11 snAAA(15) type=0 snAuthentication(1) type=0 + snAuthenticationDot1x(1) type=2 + snAuthenticationEnable(2) type=2 + snAuthenticationLogin(3) type=2 + snAuthenticationSnmpserver(4) type=2 + snAuthenticationWebserver(5) type=2 snAuthorization(2) type=0 snAuthorizationCommandMethods(1) type=2 snAuthorizationCommandLevel(2) type=3 snAuthorizationExec(3) type=2 + snAuthorizationCoaEnable(4) type=3 + snAuthorizationCoaIgnore(5) type=2 snAccounting(3) type=0 snAccountingCommandMethods(1) type=2 snAccountingCommandLevel(2) type=3 snAccountingExec(3) type=2 snAccountingSystem(4) type=2 - snCAR(16) type=0 + snCAR(16) type=24 snPortCARs(1) type=0 snPortCARTable(1) type=0 snPortCAREntry(1) type=0 @@ -4147,36 +4136,13 @@ snPortCARStatFilteredPkts(13) type=11 snPortCARStatFilteredBytes(14) type=11 snPortCARStatCurBurst(15) type=7 + snPortCARRowStatus(16) type=3 agRateLimitCounterTable(2) type=0 agRateLimitCounterEntry(1) type=0 agRateLimitCounterFwdedOctets(1) type=11 agRateLimitCounterDroppedOctets(2) type=11 agRateLimitCounterReMarkedOctets(3) type=11 agRateLimitCounterTotalOctets(4) type=11 - agRateLimitCounterIndexTable(3) type=0 - agRateLimitCounterIndexEntry(1) type=0 - agRateLimitCounterIndexRowIndex(1) type=3 - agRateLimitCounterIndexDirection(2) type=3 - agRateLimitCounterIndexACLID(3) type=16 - agRateLimitCounterIndexVLANID(4) type=16 - agRateLimitCounterIndexVLANGroupID(5) type=16 - agRateLimitCounterIndexMACAddress(6) type=2 hint=1x: - agRateLimitBUMCounterTable(4) type=0 - agRateLimitBUMCounterEntry(1) type=0 - agRateLimitBUMCounterIfindex(1) type=16 hint=d - agRateLimitBUMCounterVLANID(2) type=16 - agRateLimitBUMCounterPacketType(3) type=3 - agRateLimitBUMCounterDroppedOctets(4) type=11 - agRateLimitBUMCounterCBS(5) type=11 - agRateLimitBUMCounterCIR(6) type=11 - agRateLimitBUMCounterAlertLowLevelThreshold(7) type=11 - agRateLimitBUMCounterAlertHighLevelThreshold(8) type=11 - agRateLimitBUMCounterShutdownTimeout(9) type=16 - snBUMRLNotifications(5) type=0 - snTrapBUMratelimitAlertLowThreshold(1) type=21 - snTrapBUMratelimitAlertHighThreshold(2) type=21 - snTrapBUMratelimitShutdownLinkDown(3) type=21 - snTrapBUMratelimitShutdownLinkUp(4) type=21 snVLanCAR(17) type=0 snVLanCARs(1) type=0 snVLanCARTable(1) type=0 @@ -4227,6 +4193,11 @@ snNetFlowIfFlowSwitching(2) type=3 snSFlow(19) type=0 snSFlowGlb(1) type=0 + snSflowStatus(1) type=3 + snSflowSampleRate(2) type=15 + snSflowSourcePort(3) type=15 + snSflowAgentAddrType(4) type=3 + snSflowAgentAddr(5) type=2 snSflowCollectorTable(2) type=0 snSflowCollectorEntry(1) type=0 snSflowCollectorIndex(1) type=16 @@ -4272,7 +4243,7 @@ snFdpCachedAddrDeviceAddrEntryIndex(3) type=16 snFdpCachedAddrType(4) type=3 snFdpCachedAddrValue(5) type=2 - snVsrp(21) type=0 + snVsrp(21) type=24 snVsrpGlobal(1) type=0 snVsrpGroupOperModeVsrp(1) type=3 snVsrpIfStateChangeTrap(2) type=3 @@ -4322,7 +4293,7 @@ snVsrpVirRtrCurHelloInt(32) type=3 snVsrpVirRtrCurHoldDownInt(33) type=3 snVsrpVirRtrCurInitTtl(34) type=3 - snVsrpVirRtrHelloMacAddress(35) type=2 + snVsrpVirRtrHelloMacAddress(35) type=2 hint=1x: snVsrpVirRtrMasterIpAddr(36) type=5 snArpInfo(22) type=0 snArpStats(1) type=0 @@ -4333,7 +4304,7 @@ snArpStatsPendingDrop(5) type=6 snArpStatsInvalidSource(6) type=6 snArpStatsInvalidDestination(7) type=6 - snWireless(23) type=0 + snWireless(23) type=24 wgGroup(1) type=0 wgMobilityId(1) type=16 wgVpnPTDeletePolicy(2) type=16 @@ -4353,7 +4324,7 @@ wgPnPTable(4) type=0 wgPnPEntry(1) type=0 wgPnPIfIndex(1) type=16 - wgPnPMacAddress(2) type=2 + wgPnPMacAddress(2) type=2 hint=1x: wgPnPIpAddress(3) type=5 wgPnPIpMask(4) type=5 wgPnPIpDefaultGw(5) type=5 @@ -4382,7 +4353,7 @@ snPortMacSecurityIfIndex(1) type=15 snPortMacSecurityResource(2) type=3 snPortMacSecurityQueryIndex(3) type=15 - snPortMacSecurityMAC(4) type=2 + snPortMacSecurityMAC(4) type=2 hint=1x: snPortMacSecurityAgeLeft(5) type=15 snPortMacSecurityShutdownStatus(6) type=3 snPortMacSecurityShutdownTimeLeft(7) type=15 @@ -4408,7 +4379,7 @@ snPortMacSecurityIntfMacTable(4) type=0 snPortMacSecurityIntfMacEntry(1) type=0 snPortMacSecurityIntfMacIfIndex(1) type=16 - snPortMacSecurityIntfMacAddress(2) type=2 + snPortMacSecurityIntfMacAddress(2) type=2 hint=1x: snPortMacSecurityIntfMacVlanId(3) type=15 snPortMacSecurityIntfMacRowStatus(4) type=3 snPortMacSecurityAutosaveMacTable(5) type=0 @@ -4416,7 +4387,7 @@ snPortMacSecurityAutosaveMacIfIndex(1) type=16 snPortMacSecurityAutosaveMacResource(2) type=3 snPortMacSecurityAutosaveMacQueryIndex(3) type=15 - snPortMacSecurityAutosaveMacAddress(4) type=2 + snPortMacSecurityAutosaveMacAddress(4) type=2 hint=1x: snPortMacGlobalSecurity(2) type=0 snPortMacGlobalSecurityFeature(1) type=3 snPortMacGlobalSecurityAgeOutTime(2) type=15 @@ -4450,7 +4421,7 @@ snMacAuthClearMacSessionIfIndex(1) type=16 hint=d snMacAuthClearMacSessionMac(2) type=2 hint=1x: snMacAuthClearMacSessionAction(3) type=3 - snMetroRing(29) type=0 + snMetroRing(29) type=24 snMetroRingGlobalObjects(1) type=0 snMetroRingTableObjects(2) type=0 snMetroRingTable(1) type=0 @@ -4479,7 +4450,7 @@ snMetroRingSecPortType(22) type=3 snMetroRingPriPortActivePort(23) type=16 hint=d snMetroRingSecPortActivePort(24) type=16 hint=d - snStacking(31) type=0 + snStacking(31) type=24 snStackingGlobalObjects(1) type=0 snStackingGlobalConfigState(1) type=3 snStackingGlobalMacAddress(2) type=2 hint=1x: @@ -4490,6 +4461,7 @@ snStackingGlobalMixedMode(7) type=3 snStackingGlobalMaxUnitNumber(8) type=16 snStackingGlobalHighestPriority(9) type=16 + snStackingGlobalZeroTouchEnable(10) type=3 snStackingTableObjects(2) type=0 snStackingConfigUnitTable(1) type=0 snStackingConfigUnitEntry(1) type=0 @@ -4503,6 +4475,9 @@ snStackingConfigUnitStackPort2(8) type=16 hint=d snStackingConfigUnitConnectPort1(9) type=16 hint=d snStackingConfigUnitConnectPort2(10) type=16 hint=d + snStackingConfigUnitStackTrunk1(11) type=2 + snStackingConfigUnitStackTrunk2(12) type=2 + snStackingConfigUnitName(13) type=2 snStackingOperUnitTable(2) type=0 snStackingOperUnitEntry(1) type=0 snStackingOperUnitIndex(1) type=16 @@ -4566,9 +4541,7 @@ fdryMacBasedVlanMac(2) type=2 hint=1x: fdryMacBasedVlanPriority(3) type=16 fdryMacBasedVlanRowStatus(4) type=3 - fdryLinkAggregationGroupMIB(33) type=0 - fdryLinkAggregationGroupNotifyObjects(0) type=0 - fdryLAGName(1) type=2 hint=255a + fdryLinkAggregationGroupMIB(33) type=24 fdryLinkAggregationGroupTableObjects(1) type=0 fdryLinkAggregationGroupTable(1) type=0 fdryLinkAggregationGroupEntry(1) type=0 @@ -4584,6 +4557,8 @@ fdryLinkAggregationGroupPortCount(10) type=15 fdryLinkAggregationGroupRowStatus(11) type=3 fdryLinkAggregationGroupId(12) type=15 + fdryLinkAggregationGroupLacpMode(13) type=15 + fdryLinkAggregationGroupLagMac(14) type=2 hint=1x: fdryLinkAggregationGroupPortTableObjects(2) type=0 fdryLinkAggregationGroupPortTable(1) type=0 fdryLinkAggregationGroupPortEntry(1) type=0 @@ -4594,11 +4569,11 @@ fdryLinkAggregationGroupLacpPortAdminStatus(1) type=3 fdryLinkAggregationGroupLacpPortLinkStatus(2) type=3 fdryLinkAggregationGroupLacpPortLacpStatus(3) type=3 - fdryLinkAggregationGroupLacpPortLacpSysID(4) type=2 + fdryLinkAggregationGroupLacpPortLacpSysID(4) type=2 hint=1x: fdryLinkAggregationGroupLacpPortLacpKey(5) type=3 - fdryLinkAggregationGroupLacpPortLacpRemoteSysID(6) type=2 + fdryLinkAggregationGroupLacpPortLacpRemoteSysID(6) type=2 hint=1x: fdryLinkAggregationGroupLacpPortLacpRemoteKey(7) type=3 - fdryDns2MIB(34) type=0 + fdryDns2MIB(34) type=24 fdryDns2DomainName(1) type=0 fdryDns2DomainNameTable(1) type=0 fdryDns2DomainNameEntry(1) type=0 @@ -4613,7 +4588,7 @@ fdryDnsServerIndex(2) type=15 fdryDnsServerAddr(3) type=2 fdryDnsServerRowStatus(4) type=3 - fdryDaiMIB(35) type=0 + fdryDaiMIB(35) type=24 fdryDaiVlan(1) type=0 fdryDaiVlanConfigTable(1) type=0 fdryDaiVlanConfigEntry(1) type=0 @@ -4633,7 +4608,7 @@ fdryDaiArpInspectState(5) type=3 fdryDaiArpInspectAge(6) type=15 fdryDaiArpInspectPort(7) type=2 - fdryDhcpSnoopMIB(36) type=0 + fdryDhcpSnoopMIB(36) type=24 fdryDhcpSnoopGlobalObjects(1) type=0 fdryDhcpSnoopGlobalClearOper(1) type=3 fdryDhcpSnoopVlan(2) type=0 @@ -4655,7 +4630,16 @@ fdryDhcpSnoopBindPort(5) type=2 fdryDhcpSnoopBindVlanId(6) type=15 hint=d fdryDhcpSnoopBindClearOper(7) type=3 - fdryIpSrcGuardMIB(37) type=0 + fdryDhcpSnoopBind2Table(2) type=0 + fdryDhcpSnoopBind2Entry(1) type=0 + fdryDhcpSnoopBind2MacAddr(1) type=2 hint=1x: + fdryDhcpSnoopBind2VlanId(2) type=15 hint=d + fdryDhcpSnoopBind2IpAddr(3) type=5 + fdryDhcpSnoopBind2Type(4) type=3 + fdryDhcpSnoopBind2State(5) type=3 + fdryDhcpSnoopBind2Port(6) type=16 hint=d + fdryDhcpSnoopBind2ClearOper(7) type=3 + fdryIpSrcGuardMIB(37) type=24 fdryIpSrcGuardInterface(1) type=0 fdryIpSrcGuardIfConfigTable(1) type=0 fdryIpSrcGuardIfConfigEntry(1) type=0 @@ -4823,7 +4807,528 @@ brcdSPXPEGroupPEGroup(2) type=2 brcdSPXPEGroupPEIdList(3) type=2 brcdSPXPEGroupCBSPXEndPort(4) type=16 hint=d - snL4(4) type=0 + brcdStackISSUMIB(41) type=24 + brcdStackISSUGlobalObjects(1) type=0 + brcdStackISSUGlobalUpgradeOption(1) type=3 + brcdStackISSUGlobalUpgradeStatus(2) type=3 + brcdStackISSUGlobalUpgradeSystemReady(3) type=3 + brcdStackISSUGlobalUpgradeError(4) type=2 + brcdStackISSUTableObjects(2) type=0 + brcdStackISSUStatusUnitTable(1) type=0 + brcdStackISSUStatusUnitEntry(1) type=0 + brcdStackISSUStatusUnitIndex(1) type=16 + brcdStackISSUStatusUnitSequence(2) type=16 + brcdStackISSUStatusUnitType(3) type=2 + brcdStackISSUStatusUnitRole(4) type=3 + brcdStackISSUStatusUnitStatus(5) type=3 + snDhcpServer(42) type=24 + snDhcpServerGlobalObjects(1) type=0 + snDhcpServerGlobalConfigState(1) type=3 + snDhcpServerTableObjects(2) type=0 + snDhcpServerPoolConfigTable(1) type=0 + snDhcpServerPoolConfigEntry(1) type=0 + snDhcpServerPoolName(1) type=2 + snDhcpServerPoolNetwork(2) type=5 + snDhcpServerPoolNetworkMask(3) type=5 + snDhcpServerPoolStartAddr(4) type=5 + snDhcpServerPoolEndAddr(5) type=5 + snDhcpServerPoolLeaseDay(6) type=16 + snDhcpServerPoolLeaseHour(7) type=16 + snDhcpServerPoolLeaseMinute(8) type=16 + snDhcpServerPoolDeploy(9) type=3 + snDhcpServerPoolRowStatus(10) type=3 + snDhcpServerPoolOptionConfigTable(2) type=0 + snDhcpServerPoolOptionConfigEntry(1) type=0 + snDhcpServerPoolOptionCode(1) type=16 + snDhcpServerPoolOptionType(2) type=3 + snDhcpServerPoolOptionAscii(3) type=2 + snDhcpServerPoolOptionHexString(4) type=2 + snDhcpServerPoolOptionIPString(5) type=2 + snDhcpServerPoolOptionRowStatus(6) type=3 + snDhcpServerPoolOptionBoolString(7) type=2 + snDhcpServerPoolOptionIntString(8) type=2 + snDhcpServerPoolOptionIPAddrPairString(9) type=2 + snDhcpServerPoolOptionStaticRouteString(10) type=2 + snDhcpServerPoolOptionSlpDirAgentString(11) type=2 + snDhcpServerPoolOptionSlpSrvScopeString(12) type=2 + snDhcpServerPoolOptionPxeIntfIdString(13) type=2 + snDhcpServerPoolOptionPxeClientIdString(14) type=2 + snDhcpServerPoolExcludedSingleAddressTable(3) type=0 + snDhcpServerPoolExcludedSingleAddressEntry(1) type=0 + snDhcpServerPoolExcludedAddressIndex(1) type=16 + snDhcpServerPoolExcludedSingleAddress(2) type=5 + snDhcpServerPoolExcludedSingleAddressRowStatus(3) type=3 + snDhcpServerPoolExcludedAddressRangeTable(4) type=0 + snDhcpServerPoolExcludedAddressRangeEntry(1) type=0 + snDhcpServerPoolExcludedAddressRangeIndex(1) type=16 + snDhcpServerPoolExcludedStartAddress(2) type=5 + snDhcpServerPoolExcludedEndAddress(3) type=5 + snDhcpServerPoolExcludedAddressRowStatus(4) type=3 + ruckusWiredClientMIB(43) type=24 + ruckusWiredClientNotify(0) type=0 + ruckusWiredClientConnectedNotify(1) type=21 + ruckusWiredClientDisconnectedNotify(2) type=21 + ruckusWiredClientObjects(1) type=0 + ruckusWiredClients(1) type=0 + ruckusWiredClientsTable(1) type=0 + ruckusWiredClientEntry(1) type=0 + ruckusWiredClientMac(1) type=2 hint=1x: + ruckusWiredClientVlan(2) type=3 + ruckusWiredClientType(3) type=3 + ruckusWiredClientAuthType(4) type=3 + ruckusWiredClientStatus(5) type=3 + ruckusWiredClientDescr(6) type=2 hint=255t + ruckusWiredClientUserName(7) type=2 hint=255t + ruckusWiredClientV4Addr(8) type=2 hint=1d.1d.1d.1d + ruckusWiredClientV6Addr(9) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusWiredClientUpTime(10) type=8 units=centi-seconds + ruckusWiredClientTxPkts(11) type=11 + ruckusWiredClientRxPkts(12) type=11 + ruckusWiredClientTxOctets(13) type=11 + ruckusWiredClientRxOctets(14) type=11 + ruckusDhcpClientHostName(15) type=2 hint=255t + ruckusDhcpClientDeviceTypeName(16) type=2 hint=255t + ruckusDhcpClientOsVendorName(17) type=2 hint=255t + ruckusDhcpClientModelName(18) type=2 hint=255t + ruckusWiredClientConformance(2) type=0 + ruckusWiredClientMIBCompliances(1) type=0 + ruckusWiredClientCompliance(1) type=26 + ruckusWiredClientMIBGroups(2) type=0 + ruckusWiredClientGroup(1) type=22 + ruckusAuthMIB(44) type=24 + ruckusAuthNotification(0) type=0 + ruckusAuthPortAuthorizedNotif(1) type=21 + ruckusAuthPortUnauthorizedNotif(2) type=21 + ruckusAuthMacAuthorizedNotif(3) type=21 + ruckusAuthMacUnauthorizedNotif(4) type=21 + ruckusAuthAclFailNotif(5) type=21 + ruckusAuthObjects(1) type=0 + ruckusAuthConfig(1) type=0 + ruckusAuthDefaultVlan(1) type=3 + ruckusAuthVoiceVlan(2) type=3 + ruckusAuthCriticalVlan(3) type=3 + ruckusAuthRestrictVlan(4) type=3 + ruckusAuthEnable(5) type=12 + ruckusAuthMode(6) type=3 + ruckusAuthMethods(7) type=3 + ruckusAuthMaxSessions(8) type=15 + ruckusAuthFailAction(9) type=3 + ruckusAuthTimeoutAction(10) type=3 + ruckusAuthReauthEnable(11) type=3 + ruckusAuthReauthPeriod(12) type=15 units=seconds + ruckusAuthReauthTimeout(13) type=15 units=seconds + ruckusAuthIdleTimeout(14) type=15 units=seconds + ruckusAuthDeniedTimeout(15) type=15 units=seconds + ruckusAuthAging(16) type=12 + ruckusAuthDefaultV4IngressAcl(17) type=2 hint=255a + ruckusAuthDefaultV4EgressAcl(18) type=2 hint=255a + ruckusAuthDefaultV6IngressAcl(19) type=2 hint=255a + ruckusAuthDefaultV6EgressAcl(20) type=2 hint=255a + ruckusDot1xAuthConfig(2) type=0 + ruckusDot1xQuietPeriod(1) type=15 units=seconds + ruckusDot1xTxPeriod(2) type=15 units=seconds + ruckusDot1xSuppTimeout(3) type=15 units=seconds + ruckusDot1xMaxReq(4) type=15 + ruckusDot1xMaxReauthReq(5) type=15 + ruckusDot1xGuestVlan(6) type=3 + ruckusDot1xMacAuthOverride(7) type=3 + ruckusMacAuthConfig(3) type=0 + ruckusMacAuthPasswordFormat(1) type=3 + ruckusMacAuthPasswordOverride(2) type=2 hint=255a + ruckusMacAuthDot1xOverride(3) type=3 + ruckusMacAuthDot1xEnable(4) type=3 + ruckusWebAuthConfig(4) type=0 + ruckusWebAuthTable(1) type=0 + ruckusWebAuthEntry(1) type=0 + ruckusWebAuthVlan(1) type=3 + ruckusWebAuthEnable(2) type=3 + ruckusWebAuthMode(3) type=3 + ruckusWebAuthMethod(4) type=3 + ruckusWebAuthMaxHosts(5) type=15 + ruckusWebAuthMaxAuthAttempts(6) type=15 + ruckusWebAuthReauthTime(7) type=15 units=seconds + ruckusWebAuthCycleTime(8) type=15 units=seconds + ruckusWebAuthBlockTime(9) type=15 units=seconds + ruckusWebAuthMacAgeTime(10) type=15 + ruckusWebAuthPasscode(11) type=2 hint=255a + ruckusWebAuthLocalUserDb(12) type=2 hint=255a + ruckusWebAuthSecureLogin(13) type=3 + ruckusWebAuthAccounting(14) type=3 + ruckusWebAuthCaptiveProfile(15) type=2 hint=255a + ruckusWebAuthRedirectName(16) type=2 hint=255a + ruckusWebAuthWebpageRemoveUserId(17) type=3 + ruckusWebAuthWebpageUsernameLabel(18) type=2 hint=255a + ruckusWebAuthWebpagePasswordLabel(19) type=2 hint=255a + ruckusWebAuthUpLinkPort(20) type=16 hint=d + ruckusWebAuthWebpageTop(21) type=2 hint=255a + ruckusWebAuthWebpageBottom(22) type=2 hint=255a + ruckusWebAuthWebpageTitle(23) type=2 hint=255a + ruckusWebAuthWebpageLoginButton(24) type=2 hint=255a + ruckusWebAuthTrustPortTable(2) type=0 + ruckusWebAuthTrustPortEntry(1) type=0 + ruckusWebAuthTrustPort(1) type=16 hint=d + ruckusWebAuthDnsFilterTable(3) type=0 + ruckusWebAuthDnsFilterEntry(1) type=0 + ruckusWebAuthDnsFilterId(1) type=3 + ruckusWebAuthDnsFilterType(2) type=3 + ruckusWebAuthDnsFilterAddr(3) type=2 + ruckusWebAuthDnsFilterPrefix(4) type=15 + ruckusWebAuthWhiteListTable(4) type=0 + ruckusWebAuthWhiteListEntry(1) type=0 + ruckusWebAuthWhiteListId(1) type=3 + ruckusWebAuthWhiteListType(2) type=3 + ruckusWebAuthWhiteListAddr(3) type=2 + ruckusWebAuthWhiteListPrefix(4) type=15 + ruckusWebAuthFilterTable(5) type=0 + ruckusWebAuthFilterEntry(1) type=0 + ruckusWebAuthFilterMac(1) type=2 hint=1x: + ruckusWebAuthFilterPort(2) type=16 hint=d + ruckusWebAuthFilterDuration(3) type=15 units=seconds + ruckusWebAuthFilterAction(4) type=3 + ruckusWebAuthCaptivePortalTable(6) type=0 + ruckusWebAuthCaptivePortalEntry(1) type=0 + ruckusWebAuthCaptivePortalName(1) type=2 hint=255a + ruckusWebAuthCaptivePortalType(2) type=3 + ruckusWebAuthCaptivePortalAddr(3) type=2 + ruckusWebAuthCaptivePortalPort(4) type=15 + ruckusWebAuthCaptivePortalLoginPage(5) type=2 hint=255a + ruckusAuthPortConfig(5) type=0 + ruckusAuthPortTable(1) type=0 + ruckusAuthPortEntry(1) type=0 + ruckusAuthPortEnable(1) type=12 + ruckusAuthPortDot1xControl(2) type=3 + ruckusAuthPortDefaultVlan(3) type=3 + ruckusAuthPortVoiceVlan(4) type=3 + ruckusAuthPortCriticalVlan(5) type=3 + ruckusAuthPortRestrictVlan(6) type=3 + ruckusAuthPortMode(7) type=3 + ruckusAuthPortMethods(8) type=3 + ruckusAuthPortMaxSessions(9) type=15 + ruckusAuthPortFailAction(10) type=3 + ruckusAuthPortTimeoutAction(11) type=3 + ruckusAuthPortReauthTimeout(12) type=15 units=seconds + ruckusAuthPortAging(13) type=12 + ruckusAuthPortAllowTagged(14) type=3 + ruckusAuthPortSourceGuard(15) type=3 + ruckusAuthPortDosAttacks(16) type=3 + ruckusAuthPortDosAttackLimit(17) type=15 + ruckusAuthFilterConfig(6) type=0 + ruckusAuthFilterTable(1) type=0 + ruckusAuthFilterEntry(1) type=0 + ruckusAuthFilterId(1) type=3 + ruckusAuthFilterMac(2) type=2 hint=1x: + ruckusAuthFilterMask(3) type=2 hint=1x: + ruckusAuthFilterVlan(4) type=3 + ruckusAuthFilterAction(5) type=3 + ruckusAuthSessions(7) type=0 + ruckusAuthSessionTable(1) type=0 + ruckusAuthSessionEntry(1) type=0 + ruckusAuthSessionMac(1) type=2 hint=1x: + ruckusAuthSessionVlan(2) type=3 + ruckusAuthSessionVlanType(3) type=3 + ruckusAuthSessionTaggedVlan(4) type=3 + ruckusAuthSessionUserName(5) type=2 hint=255a + ruckusAuthSessionDeviceType(6) type=3 + ruckusAuthSessionMethod(7) type=3 + ruckusAuthSessionMode(8) type=3 + ruckusAuthSessionStatus(9) type=3 + ruckusAuthSessionDot1xStatus(10) type=3 + ruckusAuthSessionAgingType(11) type=3 + ruckusAuthSessionAge(12) type=15 units=seconds + ruckusAuthSessionTimeout(13) type=15 units=seconds + ruckusAuthSessionIdleTimeout(14) type=15 units=seconds + ruckusAuthSessionTime(15) type=15 units=seconds + ruckusAuthSessionV4IngressAcl(16) type=2 hint=255a + ruckusAuthSessionV4EgressAcl(17) type=2 hint=255a + ruckusAuthSessionV6IngressAcl(18) type=2 hint=255a + ruckusAuthSessionV6EgressAcl(19) type=2 hint=255a + ruckusAuthSessionTxOctets(20) type=11 + ruckusAuthSessionRxOctets(21) type=11 + ruckusAuthSessionTxPkts(22) type=11 + ruckusAuthSessionRxPkts(23) type=11 + ruckusAuthSessionFailureReason(24) type=2 hint=255a + ruckusAuthSessionFlags(25) type=12 + ruckusAuthSessionAddrTable(2) type=0 + ruckusAuthSessionAddrEntry(1) type=0 + ruckusAuthSessionAddrId(1) type=3 + ruckusAuthSessionAddrType(2) type=3 + ruckusAuthSessionAddr(3) type=2 + ruckusAuthStatistics(8) type=0 + ruckusAuthStatsTable(1) type=0 + ruckusAuthStatsEntry(1) type=0 + ruckusDot1xSessionsAttempted(1) type=6 + ruckusDot1xSessionsAccepted(2) type=6 + ruckusDot1xSessionsRejected(3) type=6 + ruckusDot1xSessionsInProgress(4) type=6 + ruckusDot1xSessionsErrored(5) type=6 + ruckusMacAuthSessionsAttempted(6) type=6 + ruckusMacAuthSessionsAccepted(7) type=6 + ruckusMacAuthSessionsRejected(8) type=6 + ruckusMacAuthSessionsInProgress(9) type=6 + ruckusMacAuthSessionsErrored(10) type=6 + ruckusDot1xAuthStatsTable(2) type=0 + ruckusDot1xAuthStatsEntry(1) type=0 + ruckusDot1xTxEAPFrames(1) type=6 + ruckusDot1xTxEAPReqIdFrames(2) type=6 + ruckusDot1xTxEAPReqFrames(3) type=6 + ruckusDot1xRxEAPFrames(4) type=6 + ruckusDot1xRxEAPStartFrames(5) type=6 + ruckusDot1xRxEAPLogOffFrames(6) type=6 + ruckusDot1xRxEAPRespIdFrames(7) type=6 + ruckusDot1xRxEAPRespFrames(8) type=6 + ruckusDot1xRxEAPInvalidFrames(9) type=6 + ruckusDot1xRxLengthErrorFrames(10) type=16 + ruckusDot1xRxEAPLastFrameVersion(11) type=15 + ruckusDot1xRxEAPLastFrameSource(12) type=2 hint=1x: + ruckusAuthConformance(2) type=0 + ruckusAuthMIBCompliances(1) type=0 + ruckusAuthCompliance(1) type=26 + ruckusAuthMIBGroups(2) type=0 + ruckusAuthConfigGroup(1) type=22 + ruckusDot1xAuthConfigGroup(2) type=22 + ruckusMacAuthConfigGroup(3) type=22 + ruckusAuthPortConfigGroup(4) type=22 + ruckusAuthFilterConfigGroup(5) type=22 + ruckusAuthSessionsGroup(6) type=22 + ruckusAuthStatsGroup(7) type=22 + ruckusDot1xAuthStatsGroup(8) type=22 + ruckusWebAuthConfigGroup(9) type=22 + ruckusAclMIB(45) type=24 + ruckusAclNotify(0) type=0 + ruckusAclObjects(1) type=0 + ruckusAcls(1) type=0 + ruckusAclTable(1) type=0 + ruckusAclEntry(1) type=0 + ruckusAclType(1) type=3 + ruckusAclName(2) type=2 + ruckusAclAcctEnable(3) type=3 + ruckusAclStandard(4) type=3 + ruckusAclRowStatus(5) type=3 + ruckusAclFilters(2) type=0 + ruckusIpv4Filters(1) type=0 + ruckusIpv4AclFilterTable(1) type=0 + ruckusIpv4AclFilterEntry(1) type=0 + ruckusIpv4AclFilterSeqNum(1) type=15 + ruckusIpv4AclFilterAction(2) type=3 + ruckusIpv4AclFilterStdProtocol(3) type=3 + ruckusIpv4AclFilterExtProtocol(4) type=3 + ruckusIpv4AclFilterSrcAddr(5) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterSrcMask(6) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterSrcOperator(7) type=3 + ruckusIpv4AclFilterSrcPortLow(8) type=15 + ruckusIpv4AclFilterSrcPortHigh(9) type=15 + ruckusIpv4AclFilterDestAddr(10) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterDestMask(11) type=2 hint=1d.1d.1d.1d + ruckusIpv4AclFilterDestOperator(12) type=3 + ruckusIpv4AclFilterDestPortLow(13) type=15 + ruckusIpv4AclFilterDestPortHigh(14) type=15 + ruckusIpv4AclFilterEstablished(15) type=3 + ruckusIpv4AclFilterPrecedence(16) type=3 + ruckusIpv4AclFilterTos(17) type=3 + ruckusIpv4AclFilterIcmpType(18) type=3 + ruckusIpv4AclFilterIcmpCode(19) type=3 + ruckusIpv4AclFilterExtIcmpType(20) type=3 + ruckusIpv4AclFilterPolicyName(21) type=2 + ruckusIpv4AclFilterDscpMatch(22) type=3 + ruckusIpv4AclFilterDscpForce(23) type=3 + ruckusIpv4AclFilterPriorityMatch(24) type=3 + ruckusIpv4AclFilterPriorityForce(25) type=3 + ruckusIpv4AclFilterInternalPriority(26) type=3 + ruckusIpv4AclFilterMirrorPkts(27) type=3 + ruckusIpv4AclFilterLogEnable(28) type=3 + ruckusIpv4AclFilterComments(29) type=2 hint=255a + ruckusIpv4AclFilterRowStatus(30) type=3 + ruckusIpv6Filters(2) type=0 + ruckusIpv6AclFilterTable(1) type=0 + ruckusIpv6AclFilterEntry(1) type=0 + ruckusIpv6AclFilterSeqNum(1) type=15 + ruckusIpv6AclFilterAction(2) type=3 + ruckusIpv6AclFilterStdProtocol(3) type=3 + ruckusIpv6AclFilterExtProtocol(4) type=3 + ruckusIpv6AclFilterSrcAddr(5) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusIpv6AclFilterSrcPrefixLen(6) type=15 + ruckusIpv6AclFilterSrcOperator(7) type=3 + ruckusIpv6AclFilterSrcPortLow(8) type=15 + ruckusIpv6AclFilterSrcPortHigh(9) type=15 + ruckusIpv6AclFilterDestAddr(10) type=2 hint=2x:2x:2x:2x:2x:2x:2x:2x + ruckusIpv6AclFilterDestPrefixLen(11) type=15 + ruckusIpv6AclFilterDestOperator(12) type=3 + ruckusIpv6AclFilterDestPortLow(13) type=15 + ruckusIpv6AclFilterDestPortHigh(14) type=15 + ruckusIpv6AclFilterEstablished(15) type=3 + ruckusIpv6AclFilterIcmpType(16) type=3 + ruckusIpv6AclFilterIcmpCode(17) type=3 + ruckusIpv6AclFilterExtIcmpType(18) type=3 + ruckusIpv6AclFilterPolicyName(19) type=2 + ruckusIpv6AclFilterDscpMatch(20) type=3 + ruckusIpv6AclFilterDscpForce(21) type=3 + ruckusIpv6AclFilterPriorityMatch(22) type=3 + ruckusIpv6AclFilterPriorityForce(23) type=3 + ruckusIpv6AclFilterInternalPriority(24) type=3 + ruckusIpv6AclFilterFragments(25) type=3 + ruckusIpv6AclFilterSourceRoute(26) type=3 + ruckusIpv6AclFilterMirrorPkts(27) type=3 + ruckusIpv6AclFilterLogEnable(28) type=3 + ruckusIpv6AclFilterComments(29) type=2 hint=255a + ruckusIpv6AclFilterRowStatus(30) type=3 + ruckusMacFilters(3) type=0 + ruckusMacAclFilterTable(1) type=0 + ruckusMacAclFilterEntry(1) type=0 + ruckusMacAclFilterSeqNum(1) type=15 + ruckusMacAclFilterAction(2) type=3 + ruckusMacAclFilterSrcAddr(3) type=2 hint=1x: + ruckusMacAclFilterSrcMask(4) type=2 hint=1x: + ruckusMacAclFilterDestAddr(5) type=2 hint=1x: + ruckusMacAclFilterDestMask(6) type=2 hint=1x: + ruckusMacAclFilterEtherType(7) type=3 + ruckusMacAclFilterExtEtherType(8) type=15 hint=x + ruckusMacAclFilterMirrorPkts(9) type=3 + ruckusMacAclFilterLogEnable(10) type=3 + ruckusMacAclFilterRowStatus(11) type=3 + ruckusAclBindings(3) type=0 + ruckusAclIfBindTable(1) type=0 + ruckusAclIfBindEntry(1) type=0 + ruckusAclIfBindPort(1) type=16 hint=d + ruckusAclIfBindType(2) type=3 + ruckusAclIfBindDirection(3) type=3 + ruckusAclIfBindName(4) type=2 + ruckusAclIfBindLog(5) type=3 + ruckusAclIfBindRowStatus(6) type=3 + ruckusAclVlanBindTable(2) type=0 + ruckusAclVlanBindEntry(1) type=0 + ruckusAclVlanBindId(1) type=3 + ruckusAclVlanBindType(2) type=3 + ruckusAclVlanBindDirection(3) type=3 + ruckusAclVlanBindName(4) type=2 + ruckusAclVlanBindLog(5) type=3 + ruckusAclVlanBindRowStatus(6) type=3 + ruckusAclVPortBindTable(3) type=0 + ruckusAclVPortBindEntry(1) type=0 + ruckusAclVPortBindId(1) type=3 + ruckusAclVPortBindPort(2) type=16 hint=d + ruckusAclVPortBindType(3) type=3 + ruckusAclVPortBindDirection(4) type=3 + ruckusAclVPortBindName(5) type=2 + ruckusAclVPortBindLog(6) type=3 + ruckusAclVPortBindRowStatus(7) type=3 + ruckusAclConformance(2) type=0 + ruckusAclCompliances(1) type=0 + ruckusAclCompliance(1) type=26 + ruckusAclGroups(2) type=0 + ruckusAclGroup(1) type=22 + ruckusDhcpClientMIB(46) type=24 + ruckusDhcpClientGlobalObjects(1) type=0 + ruckusDhcpClientGlobalConfigState(1) type=3 + ruckusDhcpClientGlobalAutoUpdateConfigState(2) type=3 + ruckusDhcpClientSpecificVEPort(3) type=16 hint=d + ruckusNdiMIB(47) type=24 + ruckusNdiNotify(0) type=0 + ruckusNdiObjects(1) type=0 + ruckusNdiVlan(1) type=0 + ruckusNdiVlanConfigTable(1) type=0 + ruckusNdiVlanConfigEntry(1) type=0 + ruckusNdiVlanConfigVlanId(1) type=15 hint=d + ruckusNdiVlanDynNDInspectionEnable(2) type=3 + ruckusNdiInterface(2) type=0 + ruckusNdInspectIfConfigTable(1) type=0 + ruckusNdiIfConfigEntry(1) type=0 + ruckusNdiIfTrustValue(1) type=3 + ruckusNdiNDInspect(3) type=0 + ruckusNdiStaticNDInspectTable(1) type=0 + ruckusNdiStaticNDInspectEntry(1) type=0 + ruckusNdiStaticNDInspectIpv6Addr(1) type=2 hint=2x: + ruckusNdiStaticNDInspectMacAddr(2) type=2 hint=1x: + ruckusNdiStaticNDInspectType(3) type=3 + ruckusNdiStaticNDInspectState(4) type=3 + ruckusNdiStaticNDInspectAge(5) type=15 + ruckusNdiStaticNDInspectPort(6) type=16 hint=d + ruckusNdiStaticNDInspectRowStatus(7) type=3 + ruckusNdiConformance(2) type=0 + ruckusNdiCompliances(1) type=0 + ruckusNdiCompliance(1) type=26 + ruckusDhcpv6SnoopMIB(48) type=24 + ruckusDhcpv6SnoopNotify(0) type=0 + ruckusDhcpv6SnoopObjects(1) type=0 + ruckusDhcpv6SnoopGlobalObjects(1) type=0 + ruckusDhcpv6SnoopGlobalClearOper(1) type=3 + ruckusDhcpv6SnoopVlan(2) type=0 + ruckusDhcpv6SnoopVlanConfigTable(1) type=0 + ruckusDhcpv6SnoopVlanConfigEntry(1) type=0 + ruckusDhcpv6SnoopVlanConfigVLanId(1) type=15 hint=d + ruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable(2) type=3 + ruckusDhcpv6SnoopInterface(3) type=0 + ruckusDhcpv6SnoopIfConfigTable(1) type=0 + ruckusDhcpv6SnoopIfConfigEntry(1) type=0 + ruckusDhcpv6SnoopIfConfigTrustValue(1) type=3 + ruckusDhcpv6SnoopBind(4) type=0 + ruckusDhcpv6SnoopBindTable(1) type=0 + ruckusDhcpv6SnoopBindEntry(1) type=0 + ruckusDhcpv6SnoopBindMacAddr(1) type=2 hint=1x: + ruckusDhcpv6SnoopBindVlanId(2) type=15 hint=d + ruckusDhcpv6SnoopBindIpAddr(3) type=2 hint=2x: + ruckusDhcpv6SnoopBindType(4) type=3 + ruckusDhcpv6SnoopBindState(5) type=3 + ruckusDhcpv6SnoopBindPort(6) type=16 + ruckusDhcpv6SnoopBindClearOper(7) type=3 + ruckusDhcpv6SnoopConformance(2) type=0 + ruckusDhcpv6SnoopCompliances(1) type=0 + ruckusDhcpv6SnoopCompliance(1) type=26 + ruckusVxlanMIB(49) type=24 + ruckusVxlanObjects(1) type=0 + ruckusVxlanOverlayGateway(1) type=0 + ruckusVxlanOverlayGatewayTable(1) type=0 + ruckusVxlanOverlayGatewayEntry(1) type=0 + ruckusVxlanOverlayGatewayName(1) type=2 + ruckusVxlanOverlayGatewayType(2) type=3 + ruckusVxlanOverlayGatewayLoopbackId(3) type=16 + ruckusVxlanOverlayGatewayMappedVlans(4) type=16 + ruckusVxlanOverlayGatewayExtendedSites(5) type=16 + ruckusVxlanOverlayGatewayRowStatus(6) type=3 + ruckusVxlanOverlayGatewayVlanMapTable(2) type=0 + ruckusVxlanOverlayGatewayVlanMapEntry(1) type=0 + ruckusVxlanOverlayGatewayVlanMapVlanId(1) type=16 + ruckusVxlanOverlayGatewayVlanMapVniId(2) type=16 + ruckusVxlanOverlayGatewayVlanMapVfiId(3) type=16 + ruckusVxlanOverlayGatewayVlanMapCrossConnect(4) type=3 + ruckusVxlanOverlayGatewayVlanMapStatistics(5) type=3 + ruckusVxlanOverlayGatewayVlanMapAccessPortCount(6) type=16 + ruckusVxlanOverlayGatewayVlanMapExtendedSite(7) type=16 + ruckusVxlanOverlayGatewayVlanMapRowStatus(8) type=3 + ruckusVxlanOverlayGatewayVlanMapInUnicastPackets(9) type=11 + ruckusVxlanOverlayGatewayVlanMapInUnicastBytes(10) type=11 + ruckusVxlanOverlayGatewayVlanMapInMulticastPackets(11) type=11 + ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes(12) type=11 + ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets(13) type=11 + ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes(14) type=11 + ruckusVxlanOverlayGatewayVlanMapOutPackets(15) type=11 + ruckusVxlanOverlayGatewayVlanMapOutBytes(16) type=11 + ruckusVxlanOverlayGatewaySiteTable(3) type=0 + ruckusVxlanOverlayGatewaySiteEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteName(1) type=2 + ruckusVxlanOverlayGatewaySiteIpAddress(2) type=5 + ruckusVxlanOverlayGatewaySiteStatus(3) type=3 + ruckusVxlanOverlayGatewaySiteRowStatus(4) type=3 + ruckusVxlanOverlayGatewaySiteInUnicastPackets(5) type=11 + ruckusVxlanOverlayGatewaySiteInUnicastBytes(6) type=11 + ruckusVxlanOverlayGatewaySiteInMulticastPackets(7) type=11 + ruckusVxlanOverlayGatewaySiteInMutlticastBytes(8) type=11 + ruckusVxlanOverlayGatewaySiteInBroadcastPackets(9) type=11 + ruckusVxlanOverlayGatewaySiteInBroadcastBytes(10) type=11 + ruckusVxlanOverlayGatewaySiteOutPackets(11) type=11 + ruckusVxlanOverlayGatewaySiteOutBytes(12) type=11 + ruckusVxlanOverlayGatewaySiteMonitoring(13) type=3 + ruckusVxlanOverlayGatewaySiteKeepAlive(14) type=16 + ruckusVxlanOverlayGatewaySiteRetry(15) type=16 + ruckusVxlanOverlayGatewaySiteExtVlanTable(4) type=0 + ruckusVxlanOverlayGatewaySiteExtVlanEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteExtVlanId(1) type=16 + ruckusVxlanOverlayGatewaySiteExtVlanRowStatus(2) type=3 + ruckusVxlanOverlayGatewaySiteIpListTable(5) type=0 + ruckusVxlanOverlayGatewaySiteIpListEntry(1) type=0 + ruckusVxlanOverlayGatewaySiteIpListIpIndex(1) type=16 + ruckusVxlanOverlayGatewaySiteIpListIpAddress(2) type=5 + ruckusVxlanOverlayGatewaySiteIpListRowStatus(3) type=3 + snL4(4) type=24 snL4Gen(1) type=0 snL4MaxSessionLimit(1) type=3 snL4TcpSynLimit(2) type=3 @@ -4839,7 +5344,7 @@ snL4slbFinished(12) type=16 snL4FreeSessionCount(13) type=16 snL4BackupInterface(14) type=3 - snL4BackupMacAddr(15) type=2 + snL4BackupMacAddr(15) type=2 hint=1x: snL4Active(16) type=3 snL4Redundancy(17) type=16 snL4Backup(18) type=3 @@ -5135,8 +5640,8 @@ snL4VirtualServerStatisticSymmetricKeep(10) type=16 snL4VirtualServerStatisticSymmetricActivates(11) type=6 snL4VirtualServerStatisticSymmetricInactives(12) type=6 - snL4VirtualServerStatisticSymmetricBestStandbyMacAddr(13) type=2 - snL4VirtualServerStatisticSymmetricActiveMacAddr(14) type=2 + snL4VirtualServerStatisticSymmetricBestStandbyMacAddr(13) type=2 hint=1x: + snL4VirtualServerStatisticSymmetricActiveMacAddr(14) type=2 hint=1x: snL4VirtualServerPortStatistic(26) type=0 snL4VirtualServerPortStatisticTable(1) type=0 snL4VirtualServerPortStatisticEntry(1) type=0 @@ -5246,7 +5751,7 @@ snStackSecSwitchPortCnts(3) type=3 snStackSecSwitchEnabled(4) type=3 snStackSecSwitchAck(5) type=3 - snStackSecSwitchMacAddr(6) type=2 + snStackSecSwitchMacAddr(6) type=2 hint=1x: snStackSecSwitchSyncCmd(7) type=3 snStackSecSwitchIpAddr(8) type=5 snStackSecSwitchSubnetMask(9) type=5 @@ -5269,12 +5774,14 @@ fdryRadiusServerEntry(1) type=0 fdryRadiusServerIndex(1) type=15 fdryRadiusServerAddrType(2) type=3 - fdryRadiusServerAddr(3) type=2 + fdryRadiusServerAddr(3) type=2 hint=1x fdryRadiusServerAuthPort(4) type=15 fdryRadiusServerAcctPort(5) type=15 fdryRadiusServerRowKey(6) type=2 hint=255a fdryRadiusServerUsage(7) type=3 fdryRadiusServerRowStatus(8) type=3 + fdryRadiusServerAuthType(9) type=2 + fdryRadiusServerPriority(10) type=15 fdryTacacs(9) type=0 fdryTacacsMIB(1) type=24 fdryTacacsServer(1) type=0 @@ -5282,7 +5789,7 @@ fdryTacacsServerEntry(1) type=0 fdryTacacsServerIndex(1) type=15 fdryTacacsServerAddrType(2) type=3 - fdryTacacsServerAddr(3) type=2 + fdryTacacsServerAddr(3) type=2 hint=1x fdryTacacsServerAuthPort(4) type=15 fdryTacacsServerRowKey(5) type=2 hint=255a fdryTacacsServerUsage(6) type=3 @@ -5294,7 +5801,7 @@ fdryTrapReceiverEntry(1) type=0 fdryTrapReceiverIndex(1) type=15 fdryTrapReceiverAddrType(2) type=3 - fdryTrapReceiverAddr(3) type=2 + fdryTrapReceiverAddr(3) type=2 hint=1x fdryTrapReceiverCommunityOrSecurityName(4) type=2 fdryTrapReceiverUDPPort(5) type=16 fdryTrapReceiverSecurityModel(6) type=3 @@ -5421,7 +5928,7 @@ snIpxCacheEntry(1) type=0 snIpxCacheIndex(1) type=16 snIpxCacheNetNum(2) type=2 - snIpxCacheNode(3) type=2 + snIpxCacheNode(3) type=2 hint=1x: snIpxCacheOutFilter(4) type=3 snIpxCacheEncap(5) type=3 snIpxCachePort(6) type=16 @@ -5430,7 +5937,7 @@ snIpxRouteEntry(1) type=0 snIpxRouteIndex(1) type=16 snIpxDestNetNum(2) type=2 - snIpxFwdRouterNode(3) type=2 + snIpxFwdRouterNode(3) type=2 hint=1x: snIpxDestHopCnts(4) type=16 snIpxRouteMetric(5) type=16 snIpxDestPort(6) type=16 @@ -5440,7 +5947,7 @@ snIpxServerIndex(1) type=16 snIpxServerType(2) type=16 snIpxServerNetNum(3) type=2 - snIpxServerNode(4) type=2 + snIpxServerNode(4) type=2 hint=1x: snIpxServerSocket(5) type=16 snIpxServerHopCnts(6) type=16 snIpxServerName(7) type=2 @@ -5451,9 +5958,9 @@ snIpxFwdFilterAction(2) type=3 snIpxFwdFilterSocket(3) type=16 snIpxFwdFilterSrcNet(4) type=2 - snIpxFwdFilterSrcNode(5) type=2 + snIpxFwdFilterSrcNode(5) type=2 hint=1x: snIpxFwdFilterDestNet(6) type=2 - snIpxFwdFilterDestNode(7) type=2 + snIpxFwdFilterDestNode(7) type=2 hint=1x: snIpxFwdFilterRowStatus(8) type=3 snIpxRipFilter(6) type=0 snIpxRipFilterTable(1) type=0 @@ -5511,7 +6018,7 @@ snIpxPortCountersTxDropPktsCnt(6) type=6 snIpxPortCountersRcvFiltPktsCnt(7) type=6 snIpxPortCountersTxFiltPktsCnt(8) type=6 - snIp(2) type=0 + snIp(2) type=24 snRtIpGeneral(1) type=0 snRtClearArpCache(1) type=3 snRtClearIpCache(2) type=3 @@ -5536,13 +6043,13 @@ snRtIpSourceRoute(21) type=3 snRtIpStaticRouteTable(2) type=0 snRtIpStaticRouteEntry(1) type=0 - snRtIpStaticRouteIndex(1) type=16 - snRtIpStaticRouteDest(2) type=5 - snRtIpStaticRouteMask(3) type=5 - snRtIpStaticRouteNextHop(4) type=5 - snRtIpStaticRouteMetric(5) type=16 - snRtIpStaticRouteRowStatus(6) type=3 - snRtIpStaticRouteDistance(7) type=3 + snRtIpStaticRouteDest(1) type=5 + snRtIpStaticRouteMask(2) type=5 + snRtIpStaticRouteNextHop(3) type=5 + snRtIpStaticRouteMetric(4) type=16 + snRtIpStaticRouteRowStatus(5) type=3 + snRtIpStaticRouteDistance(6) type=3 + snRtIpStaticRouteOutgoingInterface(7) type=16 hint=d snRtIpFilterTable(3) type=0 snRtIpFilterEntry(1) type=0 snRtIpFilterIndex(1) type=16 @@ -5616,6 +6123,18 @@ snRtUdpIfHelperAddr(2) type=5 snRtUdpIfHelperAddrType(3) type=3 snRtUdpIfHelperRowStatus(4) type=3 + snRtIpIfHelperTable(3) type=0 + snRtIpIfHelperEntry(1) type=0 + snRtIpIfHelperIfIndex(1) type=16 hint=d + snRtIpIfHelperAddrIndex(2) type=3 + snRtIpIfHelperAddr(3) type=5 + snRtIpIfHelperAddrType(4) type=3 + snRtIpIfHelperRowStatus(5) type=3 + snRtIpv6IfHelperTable(4) type=0 + snRtIpv6IfHelperEntry(1) type=0 + snRtIpv6IfHelperIfIndex(1) type=16 hint=d + snRtIpv6IfHelperAddr(2) type=2 + snRtIpv6IfHelperRowStatus(3) type=3 snRtIpTraceRoute(10) type=0 snRtIpTraceRouteGeneral(1) type=0 snRtIpTraceRouteTargetAddr(1) type=5 @@ -5824,7 +6343,6 @@ snRtIpPortIfEncap(3) type=3 snRtIpPortIfMetric(4) type=3 snRtIpPortIfDirBcastFwd(5) type=3 - snRtIpPortConfigIfDonorInterface(6) type=16 hint=d agIpPortCounterTable(21) type=0 agIpPortCounterEntry(1) type=0 agIpPortCounterIpVersion(1) type=3 @@ -5905,7 +6423,7 @@ snRtIpRipStatsRespFromNonRipPort(11) type=6 snRtIpRipStatsResponseFromLoopback(12) type=6 snRtIpRipStatsPacketRejected(13) type=6 - snOspf(4) type=0 + snOspf(4) type=24 snOspfGen(1) type=0 snOspfRouterId(1) type=5 snOspfAdminStat(2) type=3 @@ -6385,7 +6903,7 @@ snRtATAddZoneFilterPortIndex(1) type=16 snRtATAddZoneFilterAction(2) type=3 snRtATAddZoneFilterRtmpEnable(3) type=3 - snBgp4(11) type=0 + snBgp4(11) type=24 snBgp4Gen(1) type=0 snBgp4GenAlwaysCompareMed(1) type=3 snBgp4GenAutoSummary(2) type=3 @@ -6669,7 +7187,7 @@ snBgp4NeighPrefixGroupInAccessList(3) type=2 snBgp4NeighPrefixGroupOutAccessList(4) type=2 snBgp4NeighPrefixGroupRowStatus(5) type=3 - snVrrp(12) type=0 + snVrrp(12) type=24 snVrrpGlobal(1) type=0 snVrrpGroupOperMode(1) type=3 snVrrpIfStateChangeTrap(2) type=3 @@ -6758,7 +7276,7 @@ snVrrpVirRtr2AdvertiseBackup(26) type=3 snVrrpVirRtr2MasterIpAddr(27) type=5 snVrrpVirRtr2IpAddrCount(28) type=3 - snVrrpVirRtr2VirtualMacAddr(29) type=2 + snVrrpVirRtr2VirtualMacAddr(29) type=2 hint=1x: snLoopbackIf(13) type=0 snLoopbackIntfConfigTable(1) type=0 snLoopbackIntfConfigEntry(1) type=0 @@ -7700,6 +8218,21 @@ snFastIronStackICX7250Switch(1) type=0 snFastIronStackICX7250BaseL3Router(2) type=0 snFastIronStackICX7250Router(3) type=0 + snFastIronStackICX7150(10) type=0 + snFastIronStackICX7150Switch(1) type=0 + snFastIronStackICX7150Router(2) type=0 + snFastIronStackICX7650(11) type=0 + snFastIronStackICX7650Switch(1) type=0 + snFastIronStackICX7650Router(2) type=0 + snFastIronStackICX7850(12) type=0 + snFastIronStackICX7850Switch(1) type=0 + snFastIronStackICX7850Router(2) type=0 + snFastIronStackICX7550(13) type=0 + snFastIronStackICX7550Switch(1) type=0 + snFastIronStackICX7550Router(2) type=0 + snFastIronStackICX8200(14) type=0 + snFastIronStackICX8200Switch(1) type=0 + snFastIronStackICX8200Router(2) type=0 snCes2000Family(49) type=0 snCes2024F(1) type=0 snCes2024C(2) type=0 @@ -7707,8 +8240,6 @@ snCes2048C(4) type=0 snCes2048FX(5) type=0 snCes2048CX(6) type=0 - snCes2024F4X(7) type=0 - snCes2024C4X(8) type=0 snFLSLCFamily(50) type=0 snFLSLC624Family(1) type=0 snFLSLC624BaseFamily(1) type=0 @@ -7735,8 +8266,6 @@ snCer2048C(4) type=0 snCer2048FX(5) type=0 snCer2048CX(6) type=0 - snCer2024F4X(7) type=0 - snCer2024C4X(8) type=0 snFWSFamily(52) type=0 snFWS624Family(1) type=0 snFWS624BaseFamily(1) type=0 @@ -7832,15 +8361,6 @@ snFCX648BaseL3Router(2) type=0 snFCX648Router(3) type=0 snFCX648AdvRouter(4) type=0 - snBrocadeMLXeFamily(55) type=0 - snBrocadeMLXe16(1) type=0 - snBrocadeMLXe16Router(2) type=0 - snBrocadeMLXe8(2) type=0 - snBrocadeMLXe8Router(2) type=0 - snBrocadeMLXe4(3) type=0 - snBrocadeMLXe4Router(2) type=0 - snBrocadeMLXe32(4) type=0 - snBrocadeMLXe32Router(2) type=0 snICX6610Family(56) type=0 snICX661024Family(1) type=0 snICX661024BaseFamily(1) type=0 @@ -8024,6 +8544,136 @@ snFastIronSPX(1) type=0 snFastIronSPXSwitch(1) type=0 snFastIronSPXRouter(2) type=0 + snICX7150Family(64) type=0 + snICX715024Family(1) type=0 + snICX715024BaseFamily(1) type=0 + snICX715024(1) type=0 + snICX715024Switch(1) type=0 + snICX715024Router(2) type=0 + snICX715024POEFamily(2) type=0 + snICX715024POE(1) type=0 + snICX715024POESwitch(1) type=0 + snICX715024POERouter(2) type=0 + snICX715024FFamily(3) type=0 + snICX715024F(1) type=0 + snICX715024FSwitch(1) type=0 + snICX715024FRouter(2) type=0 + snICX715048Family(2) type=0 + snICX715048BaseFamily(1) type=0 + snICX715048(1) type=0 + snICX715048Switch(1) type=0 + snICX715048Router(2) type=0 + snICX715048POEFamily(2) type=0 + snICX715048POE(1) type=0 + snICX715048POESwitch(1) type=0 + snICX715048POERouter(2) type=0 + snICX715048POEFFamily(3) type=0 + snICX715048POEF(1) type=0 + snICX715048POEFSwitch(1) type=0 + snICX715048POEFRouter(2) type=0 + snICX715048ZPFamily(4) type=0 + snICX715048ZP(1) type=0 + snICX715048ZPSwitch(1) type=0 + snICX715048ZPRouter(2) type=0 + snICX7150C12POEFamily(3) type=0 + snICX7150C12POEBaseFamily(1) type=0 + snICX7150C12POE(1) type=0 + snICX7150C12POESwitch(1) type=0 + snICX7150C12POERouter(2) type=0 + snICX7150C10ZPFamily(4) type=0 + snICX7150C10ZPBaseFamily(1) type=0 + snICX7150C10ZP(1) type=0 + snICX7150C10ZPSwitch(1) type=0 + snICX7150C10ZPRouter(2) type=0 + snICX7150C08PFamily(5) type=0 + snICX7150C08PBaseFamily(1) type=0 + snICX7150C08P(1) type=0 + snICX7150C08PSwitch(1) type=0 + snICX7150C08PRouter(2) type=0 + snICX7650Family(65) type=0 + snICX765048Family(1) type=0 + snICX765048POEBaseFamily(1) type=0 + snICX765048POE(1) type=0 + snICX765048POESwitch(1) type=0 + snICX765048POERouter(2) type=0 + snICX765048FBaseFamily(2) type=0 + snICX765048F(1) type=0 + snICX765048FSwitch(1) type=0 + snICX765048FRouter(2) type=0 + snICX765048ZPBaseFamily(3) type=0 + snICX765048ZP(1) type=0 + snICX765048ZPSwitch(1) type=0 + snICX765048ZPRouter(2) type=0 + snICX7850Family(66) type=0 + snICX785048Family(1) type=0 + snICX785048FBaseFamily(1) type=0 + snICX785048F(1) type=0 + snICX785048FSwitch(1) type=0 + snICX785048FRouter(2) type=0 + snICX785048FSBaseFamily(2) type=0 + snICX785048FS(1) type=0 + snICX785048FSSwitch(1) type=0 + snICX785048FSRouter(2) type=0 + snICX785032QFamily(2) type=0 + snICX785032QBaseFamily(1) type=0 + snICX785032Q(1) type=0 + snICX785032QSwitch(1) type=0 + snICX785032QRouter(2) type=0 + snICX7550Family(67) type=0 + snICX755024Family(1) type=0 + snICX755024BaseFamily(1) type=0 + snICX755024(1) type=0 + snICX755024Switch(1) type=0 + snICX755024Router(2) type=0 + snICX755024POEFamily(2) type=0 + snICX755024POE(1) type=0 + snICX755024POESwitch(1) type=0 + snICX755024POERouter(2) type=0 + snICX755024FFamily(3) type=0 + snICX755024F(1) type=0 + snICX755024FSwitch(1) type=0 + snICX755024FRouter(2) type=0 + snICX755024ZPFamily(4) type=0 + snICX755024ZP(1) type=0 + snICX755024ZPSwitch(1) type=0 + snICX755024ZPRouter(2) type=0 + snICX755048Family(2) type=0 + snICX755048BaseFamily(1) type=0 + snICX755048(1) type=0 + snICX755048Switch(1) type=0 + snICX755048Router(2) type=0 + snICX755048POEFamily(2) type=0 + snICX755048POE(1) type=0 + snICX755048POESwitch(1) type=0 + snICX755048POERouter(2) type=0 + snICX755048FFamily(3) type=0 + snICX755048F(1) type=0 + snICX755048FSwitch(1) type=0 + snICX755048FRouter(2) type=0 + snICX755048ZPFamily(4) type=0 + snICX755048ZP(1) type=0 + snICX755048ZPSwitch(1) type=0 + snICX755048ZPRouter(2) type=0 + snICX8200Family(68) type=0 + snICX820024Family(1) type=0 + snICX820024Router(1) type=0 + snICX820024PRouter(2) type=0 + snICX820024ZPRouter(3) type=0 + snICX820024FRouter(4) type=0 + snICX820024FXRouter(5) type=0 + snICX820048Family(2) type=0 + snICX820048Router(1) type=0 + snICX820048PRouter(2) type=0 + snICX820048PFRouter(3) type=0 + snICX820048PF2Router(4) type=0 + snICX820048ZP2Router(5) type=0 + snICX820048FRouter(6) type=0 + snICX8200C08Family(3) type=0 + snICX8200C08PRouter(1) type=0 + snICX8200C08PDCRouter(2) type=0 + snICX8200C08PTRouter(3) type=0 + snICX8200C08PFRouter(4) type=0 + snICX8200C08ZPRouter(5) type=0 edgeIron(4) type=0 edgeIronMib(1) type=0 edgeIronType2(5) type=0 @@ -8369,8 +9019,6 @@ ironPointWireless(15) type=0 ironPointWirelessRFS(1) type=0 ironPointWirelessAP(2) type=0 - ethernetAccessSwitchFamily(16) type=0 - ethernetAccessSwitchBr6910(1) type=0 brcdEntityOIDMIB(17) type=24 brcdEntityOIDMIBObjects(1) type=0 brcdEntityOIDOther(1) type=0 @@ -8410,6 +9058,70 @@ brcdEntityOIDChassisMLXe8(2) type=0 brcdEntityOIDChassisMLXe16(3) type=0 brcdEntityOIDChassisMLXe32(4) type=0 + brcdEntityOIDChassisICX7250Family(7) type=0 + brcdEntityOIDChassisICX725024(1) type=0 + brcdEntityOIDChassisICX725024HPOE(2) type=0 + brcdEntityOIDChassisICX725024G(3) type=0 + brcdEntityOIDChassisICX725048(4) type=0 + brcdEntityOIDChassisICX725048HPOE(5) type=0 + brcdEntityOIDChassisICX7450Family(8) type=0 + brcdEntityOIDChassisICX745024(1) type=0 + brcdEntityOIDChassisICX745024HPOE(2) type=0 + brcdEntityOIDChassisICX745032ZP(3) type=0 + brcdEntityOIDChassisICX745048(4) type=0 + brcdEntityOIDChassisICX745048HPOE(5) type=0 + brcdEntityOIDChassisICX745048F(6) type=0 + brcdEntityOIDChassisICX7750Family(9) type=0 + brcdEntityOIDChassisICX775048C(1) type=0 + brcdEntityOIDChassisICX775048F(2) type=0 + brcdEntityOIDChassisICX775026Q(3) type=0 + brcdEntityOIDChassisICX7150Family(10) type=0 + brcdEntityOIDChassisICX715024(1) type=0 + brcdEntityOIDChassisICX715024POE(2) type=0 + brcdEntityOIDChassisICX715048(3) type=0 + brcdEntityOIDChassisICX715048POE(4) type=0 + brcdEntityOIDChassisICX715048POEF(5) type=0 + brcdEntityOIDChassisICX7150C12POE(6) type=0 + brcdEntityOIDChassisICX715048ZP(7) type=0 + brcdEntityOIDChassisICX715024F(8) type=0 + brcdEntityOIDChassisICX7150C10ZP(9) type=0 + brcdEntityOIDChassisICX7150C08P(10) type=0 + brcdEntityOIDChassisICX7150C08PT(11) type=0 + brcdEntityOIDChassisICX7650Family(11) type=0 + brcdEntityOIDChassisICX765048F(1) type=0 + brcdEntityOIDChassisICX765048P(2) type=0 + brcdEntityOIDChassisICX765048ZP(3) type=0 + brcdEntityOIDChassisICX7850Family(12) type=0 + brcdEntityOIDChassisICX785032Q(1) type=0 + brcdEntityOIDChassisICX785048F(2) type=0 + brcdEntityOIDChassisICX785048FS(3) type=0 + brcdEntityOIDChassisICX785048C(4) type=0 + brcdEntityOIDChassisICX7550Family(13) type=0 + brcdEntityOIDChassisICX755024(1) type=0 + brcdEntityOIDChassisICX755024F(2) type=0 + brcdEntityOIDChassisICX755024P(3) type=0 + brcdEntityOIDChassisICX755024ZP(4) type=0 + brcdEntityOIDChassisICX755048(5) type=0 + brcdEntityOIDChassisICX755048F(6) type=0 + brcdEntityOIDChassisICX755048P(7) type=0 + brcdEntityOIDChassisICX755048ZP(8) type=0 + brcdEntityOIDChassisICX8200Family(14) type=0 + brcdEntityOIDChassisICX820024(1) type=0 + brcdEntityOIDChassisICX820024F(2) type=0 + brcdEntityOIDChassisICX820024FX(3) type=0 + brcdEntityOIDChassisICX820024P(4) type=0 + brcdEntityOIDChassisICX820024ZP(5) type=0 + brcdEntityOIDChassisICX820048(6) type=0 + brcdEntityOIDChassisICX820048F(7) type=0 + brcdEntityOIDChassisICX820048P(8) type=0 + brcdEntityOIDChassisICX820048PF(9) type=0 + brcdEntityOIDChassisICX820048PF2(10) type=0 + brcdEntityOIDChassisICX820048ZP2(11) type=0 + brcdEntityOIDChassisICX8200C08P(12) type=0 + brcdEntityOIDChassisICX8200C08PF(13) type=0 + brcdEntityOIDChassisICX8200C08PT(14) type=0 + brcdEntityOIDChassisICX8200C08PDC(15) type=0 + brcdEntityOIDChassisICX8200C08ZP(16) type=0 brcdEntityOIDBackplane(4) type=0 brcdEntityOIDBackplaneUnknown(1) type=0 brcdEntityOIDBackplaneNetIronFamily(2) type=0 @@ -8442,6 +9154,10 @@ brcdEntityOIDPowerSupplyDC2400W(13) type=0 brcdEntityOIDPowerSupplyAC3000W(14) type=0 brcdEntityOIDPowerSupplyDC3000W(15) type=0 + brcdEntityOIDPowerSupplyACPOE(16) type=0 + brcdEntityOIDPowerSupplyACRegular(17) type=0 + brcdEntityOIDPowerSupplyDCPOE(18) type=0 + brcdEntityOIDPowerSupplyDCRegular(19) type=0 brcdEntityOIDFan(7) type=0 brcdEntityOIDFanUnknown(1) type=0 brcdEntityOIDChassisFanTray(2) type=0 @@ -8464,6 +9180,70 @@ brcdEntityOIDModuleMgmtBrMlxMr2X(2) type=0 brcdEntityOIDModuleMgmtBrMlx32Mr2M(3) type=0 brcdEntityOIDModuleMgmtBrMlx32Mr2X(4) type=0 + brcdEntityOIDModuleMgmtIcx7250Family(4) type=0 + brcdEntityOIDModuleMgmtIcx7250624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7250648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7250624GBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7250624PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7250648PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7450Family(5) type=0 + brcdEntityOIDModuleMgmtIcx7450624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7450648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7450648FBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7450624PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7450648PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7450632ZPBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7750Family(6) type=0 + brcdEntityOIDModuleMgmtIcx775048CBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx775048FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx775026QBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx775020QBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7150Family(7) type=0 + brcdEntityOIDModuleMgmtIcx7150624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7150648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7150624PoeBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7150648PoeBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7150648PoeFBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7150612CPoeBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7150648ZPBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx7150624FBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx7150C10ZPBaseModule(9) type=0 + brcdEntityOIDModuleMgmtIcx7150C08PBaseModule(10) type=0 + brcdEntityOIDModuleMgmtIcx7150C08PTBaseModule(11) type=0 + brcdEntityOIDModuleMgmtIcx7650Family(8) type=0 + brcdEntityOIDModuleMgmtIcx7650648FBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7650648PoeBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7650648ZPBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7850Family(9) type=0 + brcdEntityOIDModuleMgmtIcx7850632QBaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7850648FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7850648FSBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7550Family(10) type=0 + brcdEntityOIDModuleMgmtIcx7550624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx7550648BaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx7550624FBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx7550648FBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx7550624PoeBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx7550648PoeBaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx7550624ZPBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx7550648ZPBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx8200Family(11) type=0 + brcdEntityOIDModuleMgmtIcx8200624BaseModule(1) type=0 + brcdEntityOIDModuleMgmtIcx8200624FBaseModule(2) type=0 + brcdEntityOIDModuleMgmtIcx8200624FXBaseModule(3) type=0 + brcdEntityOIDModuleMgmtIcx8200624PBaseModule(4) type=0 + brcdEntityOIDModuleMgmtIcx8200624ZPBaseModule(5) type=0 + brcdEntityOIDModuleMgmtIcx8200648BaseModule(6) type=0 + brcdEntityOIDModuleMgmtIcx8200648FBaseModule(7) type=0 + brcdEntityOIDModuleMgmtIcx8200648PBaseModule(8) type=0 + brcdEntityOIDModuleMgmtIcx8200648PFBaseModule(9) type=0 + brcdEntityOIDModuleMgmtIcx8200648PF2BaseModule(10) type=0 + brcdEntityOIDModuleMgmtIcx8200648ZP2BaseModule(11) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PBaseModule(12) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PDCBaseModule(13) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PFBaseModule(14) type=0 + brcdEntityOIDModuleMgmtIcx82006C08PTBaseModule(15) type=0 + brcdEntityOIDModuleMgmtIcx82006C08ZPBaseModule(16) type=0 brcdEntityOIDModuleSfm(3) type=0 brcdEntityOIDModuleSfmUnknown(1) type=0 brcdEntityOIDModuleSfmNetIronFamily(2) type=0 @@ -8511,6 +9291,48 @@ brcdEntityOIDModuleOpticsCFP(5) type=0 brcdEntityOIDModuleOpticsQSFPP(6) type=0 brcdEntityOIDModuleOpticsCFP2(7) type=0 + brcdEntityOIDModuleOpticsGBIC(8) type=0 + brcdEntityOIDModuleService(6) type=0 + brcdEntityOIDModuleServiceUnknown(1) type=0 + brcdEntityOIDModuleServiceIcx7250Family(2) type=0 + brcdEntityOIDModuleServiceIcx7250sfpplus8Port80gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7250sfpplus4Port4gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7450Family(3) type=0 + brcdEntityOIDModuleServiceIcx7400sfpplus4Port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7400copper4Port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7400sfp4Port4gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7400qsfpplus1Port40gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7400ServiceModule(5) type=0 + brcdEntityOIDModuleServiceIcx7750Family(4) type=0 + brcdEntityOIDModuleServiceIcx7750QSFP6port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx77506Q6port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7150Family(5) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus2Port20gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus4Port40gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7150gc2Port2gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7150sfpplus8Port80gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7150gsfp2Port2gModule(5) type=0 + brcdEntityOIDModuleServiceIcx7150gc2Port20gModule(6) type=0 + brcdEntityOIDModuleServiceIcx7650Family(6) type=0 + brcdEntityOIDModuleServiceIcx7600xgf4Port40gModule(1) type=0 + brcdEntityOIDModuleServiceIcx7600qsfp2port80gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7600100g1port100gModule(3) type=0 + brcdEntityOIDModuleServiceIcx7650qsfp4port160gModule(4) type=0 + brcdEntityOIDModuleServiceIcx7650100g2port200gModule(5) type=0 + brcdEntityOIDModuleServiceIcx7650qsfp2port80gModule(6) type=0 + brcdEntityOIDModuleServiceIcx7850Family(7) type=0 + brcdEntityOIDModuleServiceIcx78508port800gModule(1) type=0 + brcdEntityOIDModuleServiceIcx785012port1200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx7550Family(8) type=0 + brcdEntityOIDModuleServiceIcx75502port80gModule(1) type=0 + brcdEntityOIDModuleServiceIcx75502port200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx8200Family(9) type=0 + brcdEntityOIDModuleServiceIcx82004Port100gModule(1) type=0 + brcdEntityOIDModuleServiceIcx82008Port200gModule(2) type=0 + brcdEntityOIDModuleServiceIcx82002Port2gModule(3) type=0 + brcdEntityOIDModuleServiceIcx82002Port20gModule(4) type=0 + brcdEntityOIDModuleServiceIcx82002Port50gModule(5) type=0 + brcdEntityOIDModuleServiceIcx82002Port20gcfModule(6) type=0 brcdEntityOIDPort(10) type=0 brcdEntityOIDPortUnknown(1) type=0 brcdEntityOIDPortMgmtSerial(2) type=0 @@ -8523,8 +9345,23 @@ brcdEntityOIDPort40GigBaseFx(9) type=0 brcdEntityOIDPort100GigBaseFx(10) type=0 brcdEntityOIDPort10GigBaseTx(11) type=0 + brcdEntityOIDPort25GigBaseTx(12) type=0 + brcdEntityOIDPort40GigBaseTx(13) type=0 + brcdEntityOIDPort2500BaseTx(14) type=0 + brcdEntityOIDPort5GigBaseTx(15) type=0 brcdEntityOIDStack(11) type=0 brcdEntityOIDStackUnknown(1) type=0 + brcdEntityOIDStackICXStackFamily(2) type=0 + brcdEntityOIDStackICXStackIcx7250(1) type=0 + brcdEntityOIDStackICXStackIcx7450(2) type=0 + brcdEntityOIDStackICXStackIcx7750(3) type=0 + brcdEntityOIDStackICXStackIcx7150(4) type=0 + brcdEntityOIDStackICXStackIcx7650(5) type=0 + brcdEntityOIDStackICXStackIcx7850(6) type=0 + brcdEntityOIDStackICXStackIcx7550(7) type=0 + brcdEntityOIDStackICXStackIcx8200(8) type=0 + brcdEntityOIDStackICXSPXFamily(3) type=0 + brcdEntityOIDStackICXSPX(1) type=0 brcdEntityOIDCpu(12) type=0 brcdEntityOIDCpuUnknown(1) type=0 brcdEntityOIDCpuPPC7447A(2) type=0 @@ -8657,190 +9494,4 @@ snmpFrameworkMIBCompliance(1) type=26 snmpFrameworkMIBGroups(2) type=0 snmpEngineGroup(1) type=22 - ieee(111) type=0 - standards-association-numbers-series-standards(2) type=0 - lan-man-stds(802) type=0 - ieee802dot1(1) type=0 - ieee802dot1mibs(1) type=0 - ieee8021TcMib(1) type=24 - ieee8021CfmMib(8) type=24 - dot1agNotifications(0) type=0 - dot1agCfmFaultAlarm(1) type=21 - dot1agMIBObjects(1) type=0 - dot1agCfmStack(1) type=0 - dot1agCfmStackTable(1) type=0 - dot1agCfmStackEntry(1) type=0 - dot1agCfmStackifIndex(1) type=16 hint=d - dot1agCfmStackVlanIdOrNone(2) type=16 hint=d - dot1agCfmStackMdLevel(3) type=16 hint=d - dot1agCfmStackDirection(4) type=3 - dot1agCfmStackMdIndex(5) type=15 - dot1agCfmStackMaIndex(6) type=15 - dot1agCfmStackMepId(7) type=15 hint=d - dot1agCfmStackMacAddress(8) type=2 hint=1x: - dot1agCfmDefaultMd(2) type=0 - dot1agCfmDefaultMdDefLevel(1) type=16 hint=d - dot1agCfmDefaultMdDefMhfCreation(2) type=3 - dot1agCfmDefaultMdDefIdPermission(3) type=3 - dot1agCfmDefaultMdTable(4) type=0 - dot1agCfmDefaultMdEntry(1) type=0 - dot1agCfmDefaultMdComponentId(1) type=15 hint=d - dot1agCfmDefaultMdPrimaryVid(2) type=16 hint=d - dot1agCfmDefaultMdStatus(3) type=3 - dot1agCfmDefaultMdLevel(4) type=16 hint=d - dot1agCfmDefaultMdMhfCreation(5) type=3 - dot1agCfmDefaultMdIdPermission(6) type=3 - dot1agCfmVlan(3) type=0 - dot1agCfmVlanTable(1) type=0 - dot1agCfmVlanEntry(1) type=0 - dot1agCfmVlanComponentId(1) type=15 hint=d - dot1agCfmVlanVid(2) type=16 hint=d - dot1agCfmVlanPrimaryVid(3) type=16 hint=d - dot1agCfmVlanRowStatus(4) type=3 - dot1agCfmConfigErrorList(4) type=0 - dot1agCfmConfigErrorListTable(1) type=0 - dot1agCfmConfigErrorListEntry(1) type=0 - dot1agCfmConfigErrorListVid(1) type=16 hint=d - dot1agCfmConfigErrorListIfIndex(2) type=16 hint=d - dot1agCfmConfigErrorListErrorType(3) type=12 - dot1agCfmMd(5) type=0 - dot1agCfmMdTableNextIndex(1) type=15 hint=d - dot1agCfmMdTable(2) type=0 - dot1agCfmMdEntry(1) type=0 - dot1agCfmMdIndex(1) type=15 - dot1agCfmMdFormat(2) type=3 - dot1agCfmMdName(3) type=2 - dot1agCfmMdMdLevel(4) type=16 hint=d - dot1agCfmMdMhfCreation(5) type=3 - dot1agCfmMdMhfIdPermission(6) type=3 - dot1agCfmMdMaNextIndex(7) type=15 hint=d - dot1agCfmMdRowStatus(8) type=3 - dot1agCfmMa(6) type=0 - dot1agCfmMaNetTable(1) type=0 - dot1agCfmMaNetEntry(1) type=0 - dot1agCfmMaIndex(1) type=15 - dot1agCfmMaNetFormat(2) type=3 - dot1agCfmMaNetName(3) type=2 - dot1agCfmMaNetCcmInterval(4) type=3 - dot1agCfmMaNetRowStatus(5) type=3 - dot1agCfmMaCompTable(2) type=0 - dot1agCfmMaCompEntry(1) type=0 - dot1agCfmMaComponentId(1) type=15 hint=d - dot1agCfmMaCompPrimaryVlanId(2) type=16 hint=d - dot1agCfmMaCompMhfCreation(3) type=3 - dot1agCfmMaCompIdPermission(4) type=3 - dot1agCfmMaCompNumberOfVids(5) type=15 - dot1agCfmMaCompRowStatus(6) type=3 - dot1agCfmMaMepListTable(3) type=0 - dot1agCfmMaMepListEntry(1) type=0 - dot1agCfmMaMepListIdentifier(1) type=15 hint=d - dot1agCfmMaMepListRowStatus(2) type=3 - dot1agCfmMep(7) type=0 - dot1agCfmMepTable(1) type=0 - dot1agCfmMepEntry(1) type=0 - dot1agCfmMepIdentifier(1) type=15 hint=d - dot1agCfmMepIfIndex(2) type=16 hint=d - dot1agCfmMepDirection(3) type=3 - dot1agCfmMepPrimaryVid(4) type=15 - dot1agCfmMepActive(5) type=3 - dot1agCfmMepFngState(6) type=3 - dot1agCfmMepCciEnabled(7) type=3 - dot1agCfmMepCcmLtmPriority(8) type=15 - dot1agCfmMepMacAddress(9) type=2 hint=1x: - dot1agCfmMepLowPrDef(10) type=3 - dot1agCfmMepFngAlarmTime(11) type=3 - dot1agCfmMepFngResetTime(12) type=3 - dot1agCfmMepHighestPrDefect(13) type=3 - dot1agCfmMepDefects(14) type=12 - dot1agCfmMepErrorCcmLastFailure(15) type=2 - dot1agCfmMepXconCcmLastFailure(16) type=2 - dot1agCfmMepCcmSequenceErrors(17) type=6 - dot1agCfmMepCciSentCcms(18) type=6 - dot1agCfmMepNextLbmTransId(19) type=15 - dot1agCfmMepLbrIn(20) type=6 - dot1agCfmMepLbrInOutOfOrder(21) type=6 - dot1agCfmMepLbrBadMsdu(22) type=6 - dot1agCfmMepLtmNextSeqNumber(23) type=15 - dot1agCfmMepUnexpLtrIn(24) type=6 - dot1agCfmMepLbrOut(25) type=6 - dot1agCfmMepTransmitLbmStatus(26) type=3 - dot1agCfmMepTransmitLbmDestMacAddress(27) type=2 hint=1x: - dot1agCfmMepTransmitLbmDestMepId(28) type=15 hint=d - dot1agCfmMepTransmitLbmDestIsMepId(29) type=3 - dot1agCfmMepTransmitLbmMessages(30) type=16 - dot1agCfmMepTransmitLbmDataTlv(31) type=2 - dot1agCfmMepTransmitLbmVlanPriority(32) type=16 - dot1agCfmMepTransmitLbmVlanDropEnable(33) type=3 - dot1agCfmMepTransmitLbmResultOK(34) type=3 - dot1agCfmMepTransmitLbmSeqNumber(35) type=15 - dot1agCfmMepTransmitLtmStatus(36) type=3 - dot1agCfmMepTransmitLtmFlags(37) type=12 - dot1agCfmMepTransmitLtmTargetMacAddress(38) type=2 hint=1x: - dot1agCfmMepTransmitLtmTargetMepId(39) type=15 hint=d - dot1agCfmMepTransmitLtmTargetIsMepId(40) type=3 - dot1agCfmMepTransmitLtmTtl(41) type=15 - dot1agCfmMepTransmitLtmResult(42) type=3 - dot1agCfmMepTransmitLtmSeqNumber(43) type=15 - dot1agCfmMepTransmitLtmEgressIdentifier(44) type=2 - dot1agCfmMepRowStatus(45) type=3 - dot1agCfmMepPbbTeCanReportPbbTePresence(46) type=3 - dot1agCfmMepPbbTeTrafficMismatchDefect(47) type=3 - dot1agCfmMepPbbTransmitLbmLtmReverseVid(48) type=15 hint=d - dot1agCfmMepPbbTeMismatchAlarm(49) type=3 - dot1agCfmMepPbbTeLocalMismatchDefect(50) type=3 - dot1agCfmMepPbbTeMismatchSinceReset(51) type=3 - dot1agCfmLtrTable(2) type=0 - dot1agCfmLtrEntry(1) type=0 - dot1agCfmLtrSeqNumber(1) type=15 - dot1agCfmLtrReceiveOrder(2) type=15 - dot1agCfmLtrTtl(3) type=15 - dot1agCfmLtrForwarded(4) type=3 - dot1agCfmLtrTerminalMep(5) type=3 - dot1agCfmLtrLastEgressIdentifier(6) type=2 - dot1agCfmLtrNextEgressIdentifier(7) type=2 - dot1agCfmLtrRelay(8) type=3 - dot1agCfmLtrChassisIdSubtype(9) type=3 - dot1agCfmLtrChassisId(10) type=2 - dot1agCfmLtrManAddressDomain(11) type=1 - dot1agCfmLtrManAddress(12) type=2 - dot1agCfmLtrIngress(13) type=3 - dot1agCfmLtrIngressMac(14) type=2 hint=1x: - dot1agCfmLtrIngressPortIdSubtype(15) type=3 - dot1agCfmLtrIngressPortId(16) type=2 - dot1agCfmLtrEgress(17) type=3 - dot1agCfmLtrEgressMac(18) type=2 hint=1x: - dot1agCfmLtrEgressPortIdSubtype(19) type=3 - dot1agCfmLtrEgressPortId(20) type=2 - dot1agCfmLtrOrganizationSpecificTlv(21) type=2 - dot1agCfmMepDbTable(3) type=0 - dot1agCfmMepDbEntry(1) type=0 - dot1agCfmMepDbRMepIdentifier(1) type=15 hint=d - dot1agCfmMepDbRMepState(2) type=3 - dot1agCfmMepDbRMepFailedOkTime(3) type=8 - dot1agCfmMepDbMacAddress(4) type=2 hint=1x: - dot1agCfmMepDbRdi(5) type=3 - dot1agCfmMepDbPortStatusTlv(6) type=3 - dot1agCfmMepDbInterfaceStatusTlv(7) type=3 - dot1agCfmMepDbChassisIdSubtype(8) type=3 - dot1agCfmMepDbChassisId(9) type=2 - dot1agCfmMepDbManAddressDomain(10) type=1 - dot1agCfmMepDbManAddress(11) type=2 - dot1agCfmMepDbRMepIsActive(12) type=3 - dot1agCfmConformance(2) type=0 - dot1agCfmCompliances(1) type=0 - dot1agCfmCompliance(1) type=26 - dot1agCfmGroups(2) type=0 - dot1agCfmStackGroup(1) type=22 - dot1agCfmDefaultMdGroup(2) type=22 - dot1agCfmVlanIdGroup(3) type=22 - dot1agCfmConfigErrorListGroup(4) type=22 - dot1agCfmMdGroup(5) type=22 - dot1agCfmMaGroup(6) type=22 - dot1agCfmMepGroup(7) type=22 - dot1agCfmMepDbGroup(8) type=22 - dot1agCfmNotificationsGroup(9) type=23 - ieee8021CfmMaNetGroup(10) type=22 - ieee8021CfmDefaultMdDefGroup(11) type=22 - ieee8021CfmPbbTeExtensionGroup(12) type=22 - ieee8021CfmPbbTeTrafficBitGroup(13) type=22 zeroDotZero(0) type=27 diff --git a/EXTRAS/reports/foundry_oids b/EXTRAS/reports/foundry_oids index 3b626ffe9..89778f2c7 100644 --- a/EXTRAS/reports/foundry_oids +++ b/EXTRAS/reports/foundry_oids @@ -2815,8 +2815,8 @@ .1.3.6.1.4.1.1588.3.3.1.1001,BROCADE-PRODUCTS-MIB::vdx8770S8,,,,,, .1.3.6.1.4.1.1588.3.3.1.1002,BROCADE-PRODUCTS-MIB::vdx8770S16,,,,,, .1.3.6.1.4.1.1991,BRCD-DOT1X-MIB::foundry,,,,,, -.1.3.6.1.4.1.1991.0,FOUNDRY-SN-ROOT-MIB::snTraps,,,,,, -.1.3.6.1.4.1.1991.0.1,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupply,,,,,,The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 4-31 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present). +.1.3.6.1.4.1.1991.0,FOUNDRY-SN-NOTIFICATION-MIB::snTraps,,,,,, The MIB module describes proprietery SNMP Trap information of Ruckus Wireless, Inc' router/switch product. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. +.1.3.6.1.4.1.1991.0.1,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupply,,,,,,The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 4-31 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present). .1.3.6.1.4.1.1991.0.2,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLockedAddressViolation,,,,,,The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port. .1.3.6.1.4.1.1991.0.3,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOspfIfStateChange,,,,,,An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup). .1.3.6.1.4.1.1991.0.4,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOspfVirtIfStateChange,,,,,,An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point). @@ -2900,18 +2900,18 @@ .1.3.6.1.4.1.1991.0.82,FOUNDRY-SN-NOTIFICATION-MIB::snTrapVrrpeIfStateChange,,,,,,The SNMP trap that is generated when a VRRPE routing device switched between states master, backup, intialized or uknown. .1.3.6.1.4.1.1991.0.83,FOUNDRY-SN-NOTIFICATION-MIB::snTrapVsrpIfStateChange,,,,,,The SNMP trap that is generated when a VSRP switching and routing device switched between states master, backup, intialized or uknown. .1.3.6.1.4.1.1991.0.84,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSrcIpAddressViolation,,,,,,The SNMP trap that is generated when a rogue device spoofs source IP address for denial of service attack. -.1.3.6.1.4.1.1991.0.85,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthEnable,,,,,,The SNMP trap that is generated when MAC-Authentication is enabled on an interface. -.1.3.6.1.4.1.1991.0.86,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthDisable,,,,,,The SNMP trap that is generated when MAC-Authentication is disabled on an interface. -.1.3.6.1.4.1.1991.0.87,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthMACAccepted,,,,,,The SNMP trap that is generated when MAC-Authentication is successful on an interface. -.1.3.6.1.4.1.1991.0.88,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthMACRejected,,,,,,The SNMP trap that is generated when MAC-Authentication is failed on an interface. +.1.3.6.1.4.1.1991.0.85,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthEnable,,,,,,The SNMP trap that is generated when MAC-Authentication is enabled on an interface. +.1.3.6.1.4.1.1991.0.86,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthDisable,,,,,,The SNMP trap that is generated when MAC-Authentication is disabled on an interface. +.1.3.6.1.4.1.1991.0.87,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthMACAccepted,,,,,,The SNMP trap that is generated when MAC-Authentication is successful on an interface. +.1.3.6.1.4.1.1991.0.88,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthMACRejected,,,,,,The SNMP trap that is generated when MAC-Authentication is failed on an interface. .1.3.6.1.4.1.1991.0.89,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacAuthPortDisabled,,,,,,The SNMP trap that is generated when an interface is disabled due to MAC-Authentication detecting a DOS attack on that interface. -.1.3.6.1.4.1.1991.0.110,FOUNDRY-SN-NOTIFICATION-MIB::snTrapClientLoginReject,,,,,,The SNMP trap that is generated when a login attempt by a telnet or SSH client fails. +.1.3.6.1.4.1.1991.0.110,FOUNDRY-SN-NOTIFICATION-MIB::snTrapClientLoginReject,,,,,,The SNMP trap that is generated when a login attempt by a telnet or SSH client fails. .1.3.6.1.4.1.1991.0.111,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLocalUserConfigChange,,,,,,The SNMP trap that is generated when a local user configuration is changed. .1.3.6.1.4.1.1991.0.112,FOUNDRY-SN-NOTIFICATION-MIB::snTrapVlanConfigChange,,,,,,The SNMP trap that is generated when a vlan configuration is changed. .1.3.6.1.4.1.1991.0.113,FOUNDRY-SN-NOTIFICATION-MIB::snTrapAclConfigChange,,,,,,The SNMP trap that is generated when a ACL configuration is changed. .1.3.6.1.4.1.1991.0.114,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacFilterConfigChange,,,,,,The SNMP trap that is generated when a MAC Filter configuration is changed. .1.3.6.1.4.1.1991.0.115,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSNMPConfigChange,,,,,,The SNMP trap that is generated when a SNMP configuration is changed. -.1.3.6.1.4.1.1991.0.116,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSyslogConfigChange,,,,,,The SNMP trap that is generated when syslog is enabled/disabled globally, or when a syslog server is added/deleted. +.1.3.6.1.4.1.1991.0.116,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSyslogConfigChange,,,,,,The SNMP trap that is generated when a Syslog configuration is changed. .1.3.6.1.4.1.1991.0.117,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPasswordConfigChange,,,,,,The SNMP trap that is generated when enable or line password is changed. .1.3.6.1.4.1.1991.0.118,FOUNDRY-SN-NOTIFICATION-MIB::snTrapServerStatusChange,,,,,,The SNMP trap that is generated when a server is disabled or enabled. .1.3.6.1.4.1.1991.0.119,FOUNDRY-SN-NOTIFICATION-MIB::snTrapL4RealServerPortMaxConnectionLimitReached,,,,,,The SNMP trap that is generated when the real server's port reaches maximum number of connections. @@ -2951,8 +2951,8 @@ .1.3.6.1.4.1.1991.0.153,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMstpBPDUGuardDetect,,,,,,The SNMP trap that is generated when BPDU-guarded port received BPDU . .1.3.6.1.4.1.1991.0.154,FOUNDRY-SN-NOTIFICATION-MIB::snTrapErrorDisableAction,,,,,,The SNMP trap that is generated when Interface error-disable is hit or recovery times out . .1.3.6.1.4.1.1991.0.155,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLACPLinkStateChange,,,,,,The SNMP trap that is generated when LACP port changes its state. -.1.3.6.1.4.1.1991.0.156,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringNotFoundryOptics,,,,,,The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Foundry Networks. -.1.3.6.1.4.1.1991.0.157,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringFoundryOpticsNotCapable,,,,,,The SNMP trap that is generated if optical monitoring is enabled but the Foundry optic is not capable. +.1.3.6.1.4.1.1991.0.156,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringNotFoundryOptics,,,,,,The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Ruckus Wireless, Inc. +.1.3.6.1.4.1.1991.0.157,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringFoundryOpticsNotCapable,,,,,,The SNMP trap that is generated if optical monitoring is enabled but the Ruckus Wireless optic is not capable. .1.3.6.1.4.1.1991.0.158,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStaticMulticastMacConfigAdd,,,,,,The SNMP trap that is generated if a new entry is added to static multicast mac configuration table. Format 1: Static Mac entry with Mac Address is added to portnumber on VLAN Format 2: Static Mac entry with Mac Address is added to portmask <0xXXXXXXXX-XXXXXXXX> on VLAN .1.3.6.1.4.1.1991.0.159,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStaticMulticastMacConfigRemove,,,,,,The SNMP trap that is generated if an entry is removed from static multicast mac configuration table . Format 1: Static Mac entry with Mac Address is deleted from portnumber on VLAN Format 2: Static Mac entry with Mac Address is deleted from portmask <0xXXXXXXXX-XXXXXXXX> on VLAN .1.3.6.1.4.1.1991.0.160,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSTPBPDUGuardExpire,,,,,,The SNMP notification that is generated when a port is re-enabled after being disabled due to BPDU Guard Violation. Format: STP: BPDU Guard re-enabled on VLAN port / @@ -2968,10 +2968,10 @@ .1.3.6.1.4.1.1991.0.170,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingManagementMACChanged,,,,,,The SNMP trap that is generated when the managemnet MAC address of a stacking system has been changed. .1.3.6.1.4.1.1991.0.171,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingTemperatureWarning,,,,,,The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold for a stack sytem. .1.3.6.1.4.1.1991.0.172,FOUNDRY-SN-NOTIFICATION-MIB::snTrapIfIndexAssignmentChanged,,,,,,The SNMP trap that is generated when the Interface Index (IfIndex) assignment for the physical interfaces was changed. -.1.3.6.1.4.1.1991.0.173,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPBRConfigChanged,,,,,,The SNMP trap that is generated when a Policy Based Routing (PBR) routemap is bound or unbound either globally or to an interface. -.1.3.6.1.4.1.1991.0.174,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupplyRPSAdd,,,,,,The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is added to the system. -.1.3.6.1.4.1.1991.0.175,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupplyRPSRemove,,,,,,The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is removed from the system. -.1.3.6.1.4.1.1991.0.176,FOUNDRY-SN-NOTIFICATION-MIB::snTrapModuleStatusChange,,,,,,The SNMP notification that is generated when a module's operational state changes. The management entity receiving the notification can identify the module and the event by referencing snChasUnitIndex, snAgentBrdIndex, snAgentBrdModuleStatus. In case of a module-down event, the varbind snAgGblTrapMessage is a text string that describes the cause. In case of module-up event, snAgGblTrapMessage is a null string. +.1.3.6.1.4.1.1991.0.173,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPBRConfigChanged,,,,,,The SNMP trap that is generated when a Policy Based Routing (PBR) routemap is bound or unbound either globally or to an interface. +.1.3.6.1.4.1.1991.0.174,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupplyRPSAdd,,,,,,The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is added to the system. +.1.3.6.1.4.1.1991.0.175,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasPwrSupplyRPSRemove,,,,,,The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is removed from the system. +.1.3.6.1.4.1.1991.0.176,FOUNDRY-SN-NOTIFICATION-MIB::snTrapModuleStatusChange,,,,,,The SNMP notification that is generated when a module's operational state changes. The management entity receiving the notification can identify the module and the event by referencing snChasUnitIndex, snAgentBrdIndex, snAgentBrdModuleStatus. In case of a module-down event, the varbind snAgGblTrapMessage is a text string that describes the cause. In case of module-up event, snAgGblTrapMessage is a null string. .1.3.6.1.4.1.1991.0.177,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasHighSpeedFansNeeded,,,,,,The SNMP trap that is generated when chassis doesn't have high speed fans for specific modules .1.3.6.1.4.1.1991.0.178,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSysmaxReverted,,,,,,The SNMP trap that is generated when the revertible sysmax elements are reverted during the card bringup if they can not be accomodated in the available memory. .1.3.6.1.4.1.1991.0.179,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSysmaxLeftLowMem,,,,,,The SNMP trap that is generated when its found during bootup that the configured sysmax set shall leave less than 10% available memory free. @@ -2987,10 +2987,6 @@ .1.3.6.1.4.1.1991.0.189,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseExpires,,,,,,The SNMP trap that is generated when a trial license is about to expire. This trap is generated daily for last 3 days and every 2 hours on the last day of expire. .1.3.6.1.4.1.1991.0.190,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseExpired,,,,,,The SNMP trap that is generated when a trial license has expired. .1.3.6.1.4.1.1991.0.191,FOUNDRY-SN-NOTIFICATION-MIB::snTrapUDLDCrcFailureDetected,,,,,,The SNMP trap that is generated when UDLD detects CRC failures on PDUs received on a port -.1.3.6.1.4.1.1991.0.192,FOUNDRY-SN-NOTIFICATION-MIB::snTrapDot1agCfmRemoteMEPAgeOut,,,,,,The SNMP trap that is generated when 802.1ag Remote MEP ages out. -.1.3.6.1.4.1.1991.0.193,FOUNDRY-SN-NOTIFICATION-MIB::snTrapDot1agCfmRemoteMEPUp,,,,,,The SNMP trap that is generated when 802.1ag Remote MEP is up. -.1.3.6.1.4.1.1991.0.194,FOUNDRY-SN-NOTIFICATION-MIB::snTrapDot1agCfmDomainCrossConnection,,,,,,The SNMP trap that is generated when 802.1ag domain gets cross-connected. -.1.3.6.1.4.1.1991.0.195,FOUNDRY-SN-NOTIFICATION-MIB::snTrapDot1agCfmDuplicateMEPId,,,,,,The SNMP trap that is generated when 802.1ag Remote MEP reports a duplicate MEP Id that conflicts with local MEP Id. .1.3.6.1.4.1.1991.0.196,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingStandbyElected,,,,,,The SNMP trap that is generated when a unit is elected as Standby unit for the stacking system. .1.3.6.1.4.1.1991.0.197,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacMoveThresholdRate,,,,,,The SNMP notification is generated when MAC movement exceeding the certain threshold for a sampling interval is detected. Format: Mac-Move threshold-rate: MAC address moved from interface to interface for vlan , times exceeding the threshold rate for a sampling interval seconds .1.3.6.1.4.1.1991.0.198,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMacMoveIntervalHistory,,,,,,The SNMP notification is generated every user configured interval, summarizing the moves in the interval . Format: Mac-Move Interval-History: <#macs> macs moved in last seconds. Total number of mac moves in the interval is <#moves> @@ -3002,18 +2998,39 @@ .1.3.6.1.4.1.1991.0.204,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStpDesignatedGuardDisable,,,,,,The SNMP trap that is generated when VLAN's ports's Designated-Guard disable. .1.3.6.1.4.1.1991.0.205,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLTrialNotify,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled with no a non-node locked license installed. Format: Stack : Use of the feature requires a license to be purchased and installed within days. .1.3.6.1.4.1.1991.0.206,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLTrialExpiry,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled after 30-44 days with no a non-node locked license installed. This message will be displayed 3 times day 30, day 37, day 44. Format: Stack : The feature has been activated for days. To ensure compliance, please purchase and install a license as soon as possible -.1.3.6.1.4.1.1991.0.207,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLNonCompliant,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled after 45+ days whit no a non-node locked license installed. Or deletion of an installed license if any of the associated features are still enabled. This message will be displayed daily. Format: Stack : THIS UNIT IS NOT COMPLIANT. A license for feature must be purchased and installed or the feature must be deactivated to become compliant with the terms and conditions of use -.1.3.6.1.4.1.1991.0.208,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLDelete,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled after a non-node locked license is deleted. Format: Stack : The license has been deleted on this unit and is available for redeployment on another unit in accordance with the terms and conditions of use. All features associated to this license must be disabled +.1.3.6.1.4.1.1991.0.207,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLNonCompliant,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled after 45+ days whit no a non-node locked license installed. Or deletion of an installed license if any of the associsted features are still enabled. This message will be displayed daily. Format: Stack : THIS UNIT IS NOT COMPLIANT. A license for feature must be purchased and installed or the feature must be deactivated to become compliant with the terms and conditions of use +.1.3.6.1.4.1.1991.0.208,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicenseNNLLDelete,,,,,,The SNMP trap that is generated when a non-node locked licensed feature is enabled after a non-node locked license is deleted. Format: Stack : The license has been deleted on this unit and is available for redeployment on another unit in accordance with the terms and conditions of use. All features associated to this license must be disabled .1.3.6.1.4.1.1991.0.209,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingShowStackConnect,,,,,,The SNMP trap that is generated when the background diagnosis detects the connection errors to notify the user to check the connections in a stacking system Format: Background diagnosis detects connection errors. Please use show stack conn to view detailed connections .1.3.6.1.4.1.1991.0.210,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingStandByChangedStandalone,,,,,,The SNMP trap that is generated when a unit is changed from Standby to Stand alone when the active unit is down. +.1.3.6.1.4.1.1991.0.211,FOUNDRY-SN-NOTIFICATION-MIB::snTrapBroadcastlimit,,,,,,The SNMP trap that is generated after reached the Broadcast limit. +.1.3.6.1.4.1.1991.0.212,FOUNDRY-SN-NOTIFICATION-MIB::snTrapMulticastlimit,,,,,,The SNMP trap that is generated after reached the Multicast limit. +.1.3.6.1.4.1.1991.0.213,FOUNDRY-SN-NOTIFICATION-MIB::snTrapUnicastlimit,,,,,,The SNMP trap that is generated after reached the Unknown Unicast limit. +.1.3.6.1.4.1.1991.0.214,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPsuFanStateChange,,,,,,The SNMP trap that is generated when the PSU fan status changed. +.1.3.6.1.4.1.1991.0.215,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackISSUSystemCompleted,,,,,,The SNMP trap that is generated when system completed stack upgrade process. Format: Stack: system upgrade completed +.1.3.6.1.4.1.1991.0.216,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackISSUSystemFailed,,,,,,The SNMP trap that is generated when system failed stack upgrade process. Format: Stack: system upgrade failed +.1.3.6.1.4.1.1991.0.217,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackISSUUnitCompleted,,,,,,The SNMP trap that is generated when unit completed upgrade process. Format: Stack: stack unit completed upgrade +.1.3.6.1.4.1.1991.0.218,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackISSUUnitFailed,,,,,,The SNMP trap that is generated when unit failed upgrade process. Format: Stack: system upgrade failed, stack unit is in failure state +.1.3.6.1.4.1.1991.0.219,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackISSUSystemStart,,,,,,The SNMP trap that is generated when system starts stack upgrade process. Format: Stack: system upgrade started and most of user interfaces are blocked +.1.3.6.1.4.1.1991.0.220,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingIgnoreShutdownTemperatureThresholdEnabled,,,,,,The SNMP trap that is generated when Ignore Shutdown Temperature Threshold is enabled for a stack unit. +.1.3.6.1.4.1.1991.0.221,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackingIgnoreShutdownTemperatureThresholdDisabled,,,,,,The SNMP trap that is generated when Ignore Shutdown Temperature Threshold is disabled for a stack unit. +.1.3.6.1.4.1.1991.0.222,FOUNDRY-SN-NOTIFICATION-MIB::snTrapGlobalBattleShortModeEnabled,,,,,,The SNMP trap that is generated when battleshort mode is enabled at global level. +.1.3.6.1.4.1.1991.0.223,FOUNDRY-SN-NOTIFICATION-MIB::snTrapGlobalBattleShortModeDisabled,,,,,,The SNMP trap that is generated when battleshort mode is disabled at global level.. +.1.3.6.1.4.1.1991.0.224,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackSAUOptionChange,,,,,,The SNMP trap that is generated when SAU license option is changed. Format: Stack: SAU license option on unit is changed to +.1.3.6.1.4.1.1991.0.225,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPMSProtectActivated,,,,,,The SNMP trap that is generated when port security violation protect is activated Format: Security: Port Security violation protect activated on interface ethernet +.1.3.6.1.4.1.1991.0.226,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPMSProtectDeactivated,,,,,,The SNMP trap that is generated when port security violation protect is de-activated Format: Security: Port Security violation protect de-activated on interface ethernet +.1.3.6.1.4.1.1991.0.227,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackSAUOptionDeleted,,,,,,The SNMP trap that is generated when SAU license option is deleted. Format: Stack: unit deleted SAU license option +.1.3.6.1.4.1.1991.0.228,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackCloudManagerConnected,,,,,,The SNMP trap that is generated when Clold manager is connected.Format: Cloud: Cloud manager is connected. All local configuration interfaces are locked +.1.3.6.1.4.1.1991.0.229,FOUNDRY-SN-NOTIFICATION-MIB::snTrapStackCloudManagerDisconnected,,,,,,The SNMP trap that is generated when Clold manager is disconnected.Format: Cloud: Cloud manager is connected. All local configuration interfaces are available +.1.3.6.1.4.1.1991.0.230,FOUNDRY-SN-NOTIFICATION-MIB::snTrapManager2FactorAuthenticationEnabled,,,,,,The SNMP trap that is generated when Manager Two-Factor Authentication is enabled. Format: MGMT Agent: Manager 2 Factor Authentication enabled. +.1.3.6.1.4.1.1991.0.231,FOUNDRY-SN-NOTIFICATION-MIB::snTrapManager2FactorAuthenticationDisabled,,,,,,The SNMP trap that is generated when Manager Two-Factor Authentication is disabled. Format: MGMT Agent: Manager 2 Factor Authentication disabled. .1.3.6.1.4.1.1991.0.1000,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChasFanOK,,,,,,The SNMP trap that is generated when a fan operational status changed from failure to normal or change in the fan speed due to temperature variations downwards. .1.3.6.1.4.1.1991.0.1001,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTemperatureOK,,,,,,The SNMP trap that is generated when the actual temperature reading is below the warning temperature threshold. .1.3.6.1.4.1.1991.0.1002,FOUNDRY-SN-NOTIFICATION-MIB::snTrapCAMOverflow,,,,,,The SNMP trap that is generated when any CAM partition becomes full. .1.3.6.1.4.1.1991.0.1003,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringWarning,,,,,,The SNMP trap that is generated if there is a warning during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. .1.3.6.1.4.1.1991.0.1004,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringAlarm,,,,,,The SNMP trap that is generated if there is an alarm during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. .1.3.6.1.4.1.1991.0.1005,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringError,,,,,,The SNMP trap that is generated if there is an error during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. -.1.3.6.1.4.1.1991.0.1006,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPosMonitoringWarning,,,,,,The SNMP trap that is generated if there is a warning during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. -.1.3.6.1.4.1.1991.0.1007,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPosMonitoringAlarm,,,,,,The SNMP trap that is generated if there is an alarm up/down during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. +.1.3.6.1.4.1.1991.0.1006,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPosMonitoringWarning,,,,,,The SNMP trap that is generated if there is a warning during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. +.1.3.6.1.4.1.1991.0.1007,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPosMonitoringAlarm,,,,,,The SNMP trap that is generated if there is an alarm up/down during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. .1.3.6.1.4.1.1991.0.1008,FOUNDRY-SN-NOTIFICATION-MIB::snTrapPosMonitoringError,,,,,,The SNMP trap that is generated if there is an error during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. .1.3.6.1.4.1.1991.0.1009,FOUNDRY-SN-NOTIFICATION-MIB::snTrapXfpSfpIncompatibleOptics,,,,,,The SNMP trap that is generated if optics is incompatible with port configuration. .1.3.6.1.4.1.1991.0.1010,FOUNDRY-MPLS-MIB::snMplsLspUp,,,,,,An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsLspPathName. @@ -3022,63 +3039,36 @@ .1.3.6.1.4.1.1991.0.1015,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMLoggingStart,,,,,,The SNMP trap that is generated if TM logging is started by an event trigger. .1.3.6.1.4.1.1991.0.1016,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMLoggingStop,,,,,,The SNMP trap that is generated if TM logging stopped due to storage full. .1.3.6.1.4.1.1991.0.1017,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMLoggingRestart,,,,,,The SNMP trap that is generated if TM logging restarted after user clearing the log. -.1.3.6.1.4.1.1991.0.1018,FOUNDRY-SN-NOTIFICATION-MIB::snTrapXfpSfpNotFoundryOptics,,,,,,The SNMP trap that is generated if optics vendor is not Foundry Networks. +.1.3.6.1.4.1.1991.0.1018,FOUNDRY-SN-NOTIFICATION-MIB::snTrapXfpSfpNotFoundryOptics,,,,,,The SNMP trap that is generated if optics vendor is not Ruckus Wireless, Inc. .1.3.6.1.4.1.1991.0.1019,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMRecoverySlotReset,,,,,,The SNMP trap that is generated when TM recovery slot reset is triggered. .1.3.6.1.4.1.1991.0.1020,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMEgressDataError,,,,,,The SNMP trap that is generated when system detects egress data errors on Traffic Manager. For e.g. Fabric Monitoring : TM Egress data errors detected on LP /TM -.1.3.6.1.4.1.1991.0.1021,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMLoggingRestart,,,,,,The SNMP trap that is generated if SFM logging restarted after user clearing the log. -.1.3.6.1.4.1.1991.0.1035,FOUNDRY-SN-NOTIFICATION-MIB::snTrapNotEnoughFapLinks,,,,,,The SNMP trap that is generated when LP FAP (Fabric Adapter Processor) has not enough links to maintain the line rate. -.1.3.6.1.4.1.1991.0.1100,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMLinkDown,,,,,,The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is down. For eg. Fabric Monitoring Link Down : SFM /FE /Link , LP /TM -.1.3.6.1.4.1.1991.0.1101,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMLinkUp,,,,,,The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is up. For eg. Fabric Monitoring Link Up : SFM /FE /Link , LP /TM +.1.3.6.1.4.1.1991.0.1100,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMLinkDown,,,,,,The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is down. For eg. Fabric Monitoring Link Down : SFM /FE /Link , LP /TM +.1.3.6.1.4.1.1991.0.1101,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMLinkUp,,,,,,The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is up. For eg. Fabric Monitoring Link Up : SFM /FE /Link , LP /TM .1.3.6.1.4.1.1991.0.1102,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMAccessError,,,,,,The SNMP trap that is generated when system fails to access a SFM Fabric Element. For e.g. Fabric Monitoring : Device access failure in SFM /FE -.1.3.6.1.4.1.1991.0.1103,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMStatusChange,,,,,,The SNMP notification that is generated when there is a change in the operational state of the Switch Fabric Module (SFM). For example, System: Health Monitoring: SFM powered off due to failure detection -.1.3.6.1.4.1.1991.0.1104,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLPFabricStatusChange,,,,,,Health Monitoring: LP Fabric status change. -.1.3.6.1.4.1.1991.0.1105,FOUNDRY-SN-NOTIFICATION-MIB::snTrapModuleNPLockupIndication,,,,,,The SNMP notification that is generated for the module's NP health monitoring to indicate that a lockup and recovery have occurred. Expressed in number of times in the past 1 hour -.1.3.6.1.4.1.1991.0.1106,FOUNDRY-SN-NOTIFICATION-MIB::snTrapModuleNPLockupThresholdExceeded,,,,,,The SNMP notification that is generated for the module's NP health monitoring when the threshold for lockup and recovery of any NP within the module have been reached. The threshold value is 5 times in the past 1 hour. -.1.3.6.1.4.1.1991.0.1107,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMAutoTuneStart,,,,,,The SNMP trap that is generated when Auto tuning starts on the fabric side -.1.3.6.1.4.1.1991.0.1108,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMAutoTuneFails,,,,,,The SNMP trap that is generated when Auto tuning fails on the fabric side -.1.3.6.1.4.1.1991.0.1109,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMAutoTuneComplete,,,,,,The SNMP trap that is generated when Auto tuning completes on the fabric side -.1.3.6.1.4.1.1991.0.1110,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMAutoTuneStart,,,,,,The SNMP trap that is generated when Auto tuning starts on the TM side -.1.3.6.1.4.1.1991.0.1111,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMAutoTuneFails,,,,,,The SNMP trap that is generated when Auto tuning fails on the TM side -.1.3.6.1.4.1.1991.0.1112,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTMAutoTuneComplete,,,,,,The SNMP trap that is generated when Auto tuning completes on the TM side -.1.3.6.1.4.1.1991.0.1113,FOUNDRY-SN-NOTIFICATION-MIB::snTrapNPILKNCRCError,,,,,,The SNMP trap that is generated when packet drops are observed in 2x100G ports because of Interlaken CRC errors -.1.3.6.1.4.1.1991.0.1114,FOUNDRY-SN-NOTIFICATION-MIB::snTrapARPMACMovement,,,,,,The SNMP trap that is generated when the MAC address associated with a host IP is changed. .1.3.6.1.4.1.1991.0.1200,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChassisFanSpeedLow,,,,,,The SNMP trap that is generated when all chassis fans change to low speed. .1.3.6.1.4.1.1991.0.1201,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChassisFanSpeedMedium,,,,,,The SNMP trap that is generated when all chassis fans change to medium speed. .1.3.6.1.4.1.1991.0.1202,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChassisFanSpeedMedHigh,,,,,,The SNMP trap that is generated when all chassis fans change to medium high speed. .1.3.6.1.4.1.1991.0.1203,FOUNDRY-SN-NOTIFICATION-MIB::snTrapChassisFanSpeedHigh,,,,,,The SNMP trap that is generated when all chassis fans change to high speed. -.1.3.6.1.4.1.1991.0.1204,FOUNDRY-LAG-MIB::fdryTrapLagDeployed,,,,,,The SNMP trap that is generated when a LAG is deployed. -.1.3.6.1.4.1.1991.0.1205,FOUNDRY-LAG-MIB::fdryTrapLagUndeployed,,,,,,The SNMP trap that is generated when a LAG is undeployed. .1.3.6.1.4.1.1991.0.1207,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSModeEnable,,,,,,The SNMP trap that is generated when FIPS mode is enabled. -.1.3.6.1.4.1.1991.0.1208,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSModeDisable,,,,,,The SNMP trap that is generated when FIPS mode is disabled. +.1.3.6.1.4.1.1991.0.1208,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSModeDisable,,,,,,The SNMP trap that is generated when FIPS mode is disabled.The zeroization of host keys and shared secret keys is done after this trap is sent. .1.3.6.1.4.1.1991.0.1209,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSHostZeroized,,,,,,The SNMP trap that is generated when host keys are zeroized in FIPS mode .1.3.6.1.4.1.1991.0.1210,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSSharedSecretZeroized,,,,,,The SNMP trap that is generated when shared secret are zeroized in FIPS mode .1.3.6.1.4.1.1991.0.1211,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSPOSTStatus,,,,,,The SNMP trap that is generated after POST. .1.3.6.1.4.1.1991.0.1212,FOUNDRY-SN-NOTIFICATION-MIB::snTrapFIPSCryptoModuleFailure,,,,,,The SNMP trap that is generated on cryptographic module failure. -.1.3.6.1.4.1.1991.0.1213,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLicense2PortNotSupported,,,,,,The SNMP trap that is generated when a 2 port license cannot be applied due to hardware limitation. -.1.3.6.1.4.1.1991.0.1214,FOUNDRY-SN-NOTIFICATION-MIB::snTrapOpticalMonitoringOK,,,,,,The SNMP trap that is generated when an interface transitions from an error to normal state because the alarms/warnings are below the threshold. snTrapOpticalMonitoringError would have been earlier generated when the interface transitioned to the error state. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff. -.1.3.6.1.4.1.1991.0.1215,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSFMAccessOK,,,,,,The SNMP trap that is generated when system can successfully access an SFM Fabric Element. snTrapSFMAccessError would have been generated when the system failed to access the FE. For e.g. Fabric Monitoring : Device SFM /FE is OK to access. -.1.3.6.1.4.1.1991.0.1216,FOUNDRY-SN-NOTIFICATION-MIB::snTrapUpgradeSingleCmdStart,,,,,,The SNMP trap that is generated when the single-command package upgrade has started. This happens after a successful download and validation of manifest file and before the first image download takes place. -.1.3.6.1.4.1.1991.0.1217,FOUNDRY-SN-NOTIFICATION-MIB::snTrapUpgradeSingleCmdDone,,,,,,The SNMP trap that is generated when the single-command package upgrade completed, or partially completed. The table brcdSwPackageLoadResultTable lists the result of the upgrade. -.1.3.6.1.4.1.1991.0.1218,FOUNDRY-SN-NOTIFICATION-MIB::snTrapAutoUpgradeStart,,,,,,The SNMP trap that is generated when an auto-upgrade on a line card has started. -.1.3.6.1.4.1.1991.0.1219,FOUNDRY-SN-NOTIFICATION-MIB::snTrapAutoUpgradeDone,,,,,,The SNMP trap that is generated when the auto-upgrade of interface module completed. -.1.3.6.1.4.1.1991.0.1220,FOUNDRY-SN-NOTIFICATION-MIB::snTrapTcamParityError,,,,,,The SNMP trap that is generated when the TCAM parity errors are detected on LP. -.1.3.6.1.4.1.1991.0.1221,FOUNDRY-SN-NOTIFICATION-MIB::snTrapLPResetOnTcamError,,,,,,The SNMP trap that is generated when the LP reset due to TCAM parity errors crossing the threshold or TCAM integrity check failure. -.1.3.6.1.4.1.1991.0.1230,FOUNDRY-SN-NOTIFICATION-MIB::snTrapSTPRootGuardViolation,,,,,,The SNMP trap that is generated when STP Root Guard Violation occurs on a port. Format: STP: Root-protect port /, VLAN inconsistent (Received superior BPDU) -.1.3.6.1.4.1.1991.0.1231,FOUNDRY-SN-NOTIFICATION-MIB::snTrapRSTPRootGuardViolation,,,,,,The SNMP trap that is generated when STP Root Guard Violation occurs on a port. Format: RSTP: Root-protect port /, VLAN inconsistent (Received superior BPDU) .1.3.6.1.4.1.1991.1,BRCD-DOT1X-MIB::products,,,,,, .1.3.6.1.4.1.1991.1.1,BRCD-DOT1X-MIB::switch,,,,,, .1.3.6.1.4.1.1991.1.1.1,FOUNDRY-SN-ROOT-MIB::snChassis,,,,,, .1.3.6.1.4.1.1991.1.1.1.1,FOUNDRY-SN-AGENT-MIB::snChasGen,,,,,, -.1.3.6.1.4.1.1991.1.1.1.1.1,FOUNDRY-SN-AGENT-MIB::snChasType,OCTET,read-only,,current,,The chassis type represents the type of Foundry product being managed. +.1.3.6.1.4.1.1991.1.1.1.1.1,FOUNDRY-SN-AGENT-MIB::snChasType,OCTET,read-only,,current,,The chassis type represents the type of Ruckus Wireless product being managed. .1.3.6.1.4.1.1991.1.1.1.1.2,FOUNDRY-SN-AGENT-MIB::snChasSerNum,OCTET,read-only,,current,,The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. -.1.3.6.1.4.1.1991.1.1.1.1.3,FOUNDRY-SN-AGENT-MIB::snChasPwrSupplyStatus,Integer32,read-only,,deprecated,,This object is being deprecated, please use snChasPwrSupplyTable instead. A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). There are multiple power supplies per chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 20-31 reserved 19 Power Supply 8 DC (0=bad, 1=good). 18 Power Supply 7 DC (0=bad, 1=good). 17 Power Supply 8 present status (0=present, 1=not-present). 16 Power Supply 7 present status (0=present, 1=not-present). 15 Power Supply 6 DC (0=bad, 1=good). 14 Power Supply 5 DC (0=bad, 1=good). 13 Power Supply 6 present status (0=present, 1=not-present). 12 Power Supply 5 present status (0=present, 1=not-present). 11 Power Supply 4 DC (0=bad, 1=good). 10 Power Supply 3 DC (0=bad, 1=good). 9 Power Supply 4 present status (0=present, 1=not-present). 8 Power Supply 3 present status (0=present, 1=not-present). 4-7 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present). -.1.3.6.1.4.1.1991.1.1.1.1.4,FOUNDRY-SN-AGENT-MIB::snChasFanStatus,Integer32,read-only,,deprecated,,This object is being deprecated, please use snChasFanTable instead. A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning --------- ------- 0 fan failure. 1 fan good. There are two fans per VLAN Switch chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 6-31 reserved 5 fan6 status 4 fan5 status 3 fan4 status 2 fan3 status 1 fan2 status 0 fan1 status +.1.3.6.1.4.1.1991.1.1.1.1.3,FOUNDRY-SN-AGENT-MIB::snChasPwrSupplyStatus,Integer32,read-only,,deprecated,,This object is being deprecated, please use snChasPwrSupplyTable instead. A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). There are multiple power supplies per chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 20-31 reserved 19 Power Supply 8 DC (0=bad, 1=good). 18 Power Supply 7 DC (0=bad, 1=good). 17 Power Supply 8 present status (0=present, 1=not-present). 16 Power Supply 7 present status (0=present, 1=not-present). 15 Power Supply 6 DC (0=bad, 1=good). 14 Power Supply 5 DC (0=bad, 1=good). 13 Power Supply 6 present status (0=present, 1=not-present). 12 Power Supply 5 present status (0=present, 1=not-present). 11 Power Supply 4 DC (0=bad, 1=good). 10 Power Supply 3 DC (0=bad, 1=good). 9 Power Supply 4 present status (0=present, 1=not-present). 8 Power Supply 3 present status (0=present, 1=not-present). 4-7 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present). +.1.3.6.1.4.1.1991.1.1.1.1.4,FOUNDRY-SN-AGENT-MIB::snChasFanStatus,Integer32,read-only,,deprecated,,This object is being deprecated, please use snChasFanTable instead. A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning --------- ------- 0 fan failure. 1 fan good. There are two fans per VLAN Switch chassis in this release. The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 6-31 reserved 5 fan6 status 4 fan5 status 3 fan4 status 2 fan3 status 1 fan2 status 0 fan1 status .1.3.6.1.4.1.1991.1.1.1.1.5,FOUNDRY-SN-AGENT-MIB::snChasMainBrdDescription,OCTET,read-only,,current,,The main board description string. (It is obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.1.1.6,FOUNDRY-SN-AGENT-MIB::snChasMainPortTotal,INTEGER,read-only,,current,,The total number of ports for the main board. (It is obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.1.1.7,FOUNDRY-SN-AGENT-MIB::snChasExpBrdDescription,OCTET,read-only,,current,,The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.1.1.8,FOUNDRY-SN-AGENT-MIB::snChasExpPortTotal,INTEGER,read-only,,current,,The total number of ports for the expansion board. (It is obsoleted for Chassis Product) -.1.3.6.1.4.1.1991.1.1.1.1.9,FOUNDRY-SN-AGENT-MIB::snChasStatusLeds,Integer32,read-only,,current,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- -.1.3.6.1.4.1.1991.1.1.1.1.10,FOUNDRY-SN-AGENT-MIB::snChasTrafficLeds,Integer32,read-only,,current,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.1.1.9,FOUNDRY-SN-AGENT-MIB::snChasStatusLeds,Integer32,read-only,,current,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.1.1.10,FOUNDRY-SN-AGENT-MIB::snChasTrafficLeds,Integer32,read-only,,current,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- .1.3.6.1.4.1.1991.1.1.1.1.11,FOUNDRY-SN-AGENT-MIB::snChasMediaLeds,Integer32,read-only,,current,,A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Media LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- .1.3.6.1.4.1.1991.1.1.1.1.12,FOUNDRY-SN-AGENT-MIB::snChasEnablePwrSupplyTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate power supply failure traps. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.1.1.1.13,FOUNDRY-SN-AGENT-MIB::snChasMainBrdId,OCTET,read-only,,current,,The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - product type, FIWG=0x57, FIBB=0x42, FIMLS=0x4D NI=0x4E, TI=0x54, TIRT=0x52 octet 2 - board type, POWERPC=1, ALPHA=2 The length of the octet string is 27. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type: BI_WG 0x57 BI_BB 0x42 BI_NI 0x4E NI_M4 0x4D BI_SLB 0x53 octet 2 - module type: MASTER_FIBER_8G 0x0 MASTER_FIBER_4G 0x1 MASTER_COPPER_16 0x2 SLAVE_FIBER_4G 0x3 FI_MASTER_FIBER_2G 0x4 FI_MASTER_FIBER_4G 0x5 MASTER_COPPER_8G 0x6 FI_MASTER_FIBER_8G 0x7 SLAVE_FIBER_8G 0x8 MASTER_COPPER_12_2 0x9 SLAVE_COPPER_24 0xA FI_SLAVE_COPPER_24 0xB SLAVE_100FX_8 0xD SLAVE_100FX_16 0xC SLAVE_COPPER_8G 0xE SLAVE_COPPER_16_2 0xF STACK_FIBER_8G 0x10 STACK_COPPER_8G 0x11 MASTER_FIBER_2G 0x12 SLAVE_100FX_24 0x13 MASTER_FIBER_0G 0x14 POS_622M 0x15 POS_155M 0x16 SLAVE_FIBER_2G 0x17 SLAVE_COPPER_2G 0x18 FI_SLAVE_FIBER_2G 0x19 FI_SLAVE_FIBER_4G 0x1A FI_SLAVE_FIBER_8G 0x1B FI_SLAVE_COPPER_8G 0x1C FI_MASTER_COPPER_8G 0x1D POS_155M2P 0x1E FI_MASTER_COPPER_4G 0x1F FI_MASTER_COPPER_2G 0x20 MASTER_COPPER_4G 0x21 MASTER_COPPER_2G 0x22 MASTER_M4_8G 0x23 MASTER_M4_4G 0x24 MASTER_M4_2G 0x25 MASTER_M4_0G 0x26 MASTER_M5_0G 0x27 POS_2488M 0x28 SLAVE_M5_0G 0x29 POS_N2488M 0x2A STACK_IPC_48_2 0x2B SLAVE_NPA_FIBER_4G 0x2C ATM_2PORT 0x2D ATM_4PORT 0x2E SLAVE_FIBER_10G 0x2F STACK_FES_48_2 0x30 STACK_FES_24_2 0x31 STACK_FES_96_4 0x32 STACK_FES_12G 0x33 STACK_FESX_24G 0x34 STACK_FESX_24_2_G 0x35 STACK_FESX_24_1_G 0x36 STACK_FESX_48G 0x37 STACK_FESX_48_2_G 0x38 STACK_FESX_48_1_G 0x39 SUPERX_FI_MGMT 0x40 SUPERX_FI_2P10G 0x41 SUPERX_FI_24GC 0x42 SUPERX_FI_24GF 0x43 SUPERX_FI_2P10G_WAN 0x44 SUPERX_FI_MGMT_II 0x4a SLAVE_JC_48E 0xC3 SLAVE_JC_48T 0xC4 MASTER_JC_M4_8G 0xC5 SLAVE_JC_8G 0xC6 SLAVE_JC_B16GF 0xC8 MASTER_JC_B2404 0xC9 SLAVE_JC_B16GC 0xCA The length of the octet string is 28. Both format version 1 and 2: octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_X10GMAC_10000=4, MAC_SEEQ_1000=5, MAC_GMAC_1000=6, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 (for 10G), PHY_3COM_10_100=9 (for others) octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. Format version 1 only: octet 28 - chassis backplane type. chassis4000 = 0x00 chassis8000 = 0x02 chassis15000 = 0x01 chassisFISX = 0x04 Turbo8 = 0x07 (stack2) FastIron2 = 0x06 (sta @@ -3094,10 +3084,8 @@ .1.3.6.1.4.1.1991.1.1.1.1.23,FOUNDRY-SN-AGENT-MIB::snChasFlashCardLeds,Integer32,read-only,,current,,A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning -------- --------- 0 off 1 on .1.3.6.1.4.1.1991.1.1.1.1.24,FOUNDRY-SN-AGENT-MIB::snChasNumSlots,Integer32,read-only,,current,,Number of slots of the chassis. .1.3.6.1.4.1.1991.1.1.1.1.25,FOUNDRY-SN-AGENT-MIB::snChasArchitectureType,INTEGER,read-only,,current,stackable(1):bigIron(2):terathon(3):fifthGen(4),Architecture type. -.1.3.6.1.4.1.1991.1.1.1.1.26,FOUNDRY-SN-AGENT-MIB::snChasProductType,INTEGER,read-only,,current,invalid(0):mg8(1):ni40G(2):imr(3):biRx800(4):niXmr16000(5):biRx400(6):niXmr8000(7):biRx200(8):niXmr4000(9):niMlx16(10):niMlx8(11):niMlx4(12):niMlx32(13):niXmr32000(14):biRx32(15):niCES2000Series(16):niCER2000Series(17):brMlxE4(18):brMlxE8(19):brMlxE16(20):brMlxE32(21):biNI2(50):biBB(66):biM4(77):biNI(78):biSLB(83):biWG(87),Product type. -.1.3.6.1.4.1.1991.1.1.1.1.27,FOUNDRY-SN-AGENT-MIB::snChasSystemMode,INTEGER,read-only,,current,xmr(1):mlx(2),System Mode. This object is only applicable to XMR/MLX/MLXe products. For example, if snChasProductType is niMlx4/niMlx8/niMlx16/niMlx32 then the this object returns mlx(2). If snChasProductType is niXmr4000/niXmr8000 niXmr160000/niXmr32000 this object returns xmr(1). If snChasProductType is brMlxE4/brMlxE8/brMlxE16/brMlxE32 this object returns either xmr(1) or mlx(2) depending on the mode of the system. This object is not supported for the other products. -.1.3.6.1.4.1.1991.1.1.1.1.28,FOUNDRY-SN-AGENT-MIB::snChasFactoryPartNumber,OCTET,read-only,,current,,Factory Part number assigned by the manufacturer. -.1.3.6.1.4.1.1991.1.1.1.1.29,FOUNDRY-SN-AGENT-MIB::snChasFactorySerialNumber,OCTET,read-only,,current,,Factory serial number assigned by the manufacturer. +.1.3.6.1.4.1.1991.1.1.1.1.26,FOUNDRY-SN-AGENT-MIB::snChasProductType,INTEGER,read-only,,current,invalid(0):mg8(1):ni40G(2):imr(3):biRx800(4):niXmr16000(5):biRx400(6):niXmr8000(7):biRx200(8):niXmr4000(9):niMlx16(10):niMlx8(11):niMlx4(12):niMlx32(13):niXmr32000(14):biRx32(15):niCES2000Series(16):niCER2000Series(17):biNI2(50):biBB(66):biM4(77):biNI(78):biSLB(83):biWG(87),Product type. +.1.3.6.1.4.1.1991.1.1.1.1.30,FOUNDRY-SN-AGENT-MIB::snChasGlobalIgnoreShutdownTemperature,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable the temperature threshold shutdown (Battleshort mode) feature at global level. Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) at global level The set operation is allowed at global level. Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature at global level. Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature at global level. The default status is disabled. DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.1.2,FOUNDRY-SN-AGENT-MIB::snChasPwr,,,,,, .1.3.6.1.4.1.1991.1.1.1.2.1,FOUNDRY-SN-AGENT-MIB::snChasPwrSupplyTable,,not-accessible,,current,,A table of each power supply information. Only installed power supply appears in a table row. .1.3.6.1.4.1.1991.1.1.1.2.1.1,FOUNDRY-SN-AGENT-MIB::snChasPwrSupplyEntry,,not-accessible,snChasPwrSupplyIndex,current,,A row in the power supply table. @@ -3129,18 +3117,20 @@ .1.3.6.1.4.1.1991.1.1.1.4.1.1.2,FOUNDRY-SN-AGENT-MIB::snChasUnitSerNum,OCTET,read-only,,current,,The serial number of the chassis for each unit. If the serial number is unknown or unavailable then the value should be a zero length string. .1.3.6.1.4.1.1991.1.1.1.4.1.1.3,FOUNDRY-SN-AGENT-MIB::snChasUnitNumSlots,Integer32,read-only,,current,,Number of slots of the chassis for each unit. .1.3.6.1.4.1.1991.1.1.1.4.1.1.4,FOUNDRY-SN-AGENT-MIB::snChasUnitActualTemperature,INTEGER,read-only,,current,,Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. -.1.3.6.1.4.1.1991.1.1.1.4.1.1.5,FOUNDRY-SN-AGENT-MIB::snChasUnitWarningTemperature,INTEGER,read-only,,current,,Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. +.1.3.6.1.4.1.1991.1.1.1.4.1.1.5,FOUNDRY-SN-AGENT-MIB::snChasUnitWarningTemperature,INTEGER,read-write,,current,,Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. .1.3.6.1.4.1.1991.1.1.1.4.1.1.6,FOUNDRY-SN-AGENT-MIB::snChasUnitShutdownTemperature,INTEGER,read-only,,current,,Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. .1.3.6.1.4.1.1991.1.1.1.4.1.1.7,FOUNDRY-SN-AGENT-MIB::snChasUnitPartNum,OCTET,read-only,,current,,The part number of the chassis for each unit. If the part number is unknown or unavailable then the value should be a zero length string. +.1.3.6.1.4.1.1991.1.1.1.4.1.1.8,FOUNDRY-SN-AGENT-MIB::snChasUnitIgnoreShutdownTemperature,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) on the unit specific The set operation is allowed at unit specific. Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. The default status is disabled. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.1.4.1.1.9,FOUNDRY-SN-AGENT-MIB::snChasUnitFanless,INTEGER,read-write,,current,none(0):enabled(1):disabled(2),Fanless mode can be enabled or disabled on certain FI devices. none (0): not applicable to the device. enabled(1): fanless mode is enabled on the device disabled(2): fanless mode is disabled on the device. The default value is disabled (2) . Note: that Fanless mode can be applicable to ICX7150-24P and ICX7150-48P only DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.2,FOUNDRY-SN-ROOT-MIB::snAgentSys,,,,,, .1.3.6.1.4.1.1991.1.1.2.1,FOUNDRY-SN-AGENT-MIB::snAgentGbl,,,,,, .1.3.6.1.4.1.1991.1.1.2.1.1,FOUNDRY-SN-AGENT-MIB::snAgReload,INTEGER,read-write,,current,other(1):running(2):reset(3):busy(4),Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4).......reload not allowed at this time, flash is busy The following value can be written: reset(3).....do a hard reset The agent will return a response before the action occurs. -.1.3.6.1.4.1.1991.1.1.2.1.2,FOUNDRY-SN-AGENT-MIB::snAgEraseNVRAM,INTEGER,read-write,,current,normal(1):error(2):erase(3):erasing(4):busy(5),Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is erasing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: erase(3).....do erase The agent will return a response even before the erase is done. And the read value will be erasing until erase is done. And the erase request will be rejected until error or normal. -.1.3.6.1.4.1.1991.1.1.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM,INTEGER,read-write,,current,normal(1):error(2):write(3):writing(4):busy(5),Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agent is writing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: write(3).....do write The agent will return a response even before the write is done. And the read value will be writing until write is done. And the write request will be rejected until error or normal. -.1.3.6.1.4.1.1991.1.1.2.1.4,FOUNDRY-SN-AGENT-MIB::snAgConfigFromNVRAM,INTEGER,read-write,,current,normal(1):error(2):config(3):configing(4):busy(5),This object is no more supported by FastIron and NetIron agents and should not be used. Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configing(4)...configing from NVRAM flash is in process. busy(5).......operation not allowed at this time, flash is busy The following value can be written: config(3).....do config The agent will return a response after config is done. +.1.3.6.1.4.1.1991.1.1.2.1.2,FOUNDRY-SN-AGENT-MIB::snAgEraseNVRAM,INTEGER,read-write,,deprecated,normal(1):error(2):erase(3):erasing(4):busy(5),This object is not supported from FI9010, please use snAgEraseConfig Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is erasing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: erase(3).....do erase The agent will return a response even before the erase is done. And the read value will be erasing until erase is done. And the erase request will be rejected until error or normal. +.1.3.6.1.4.1.1991.1.1.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM,INTEGER,read-write,,deprecated,normal(1):error(2):write(3):writing(4):busy(5),This object is not supported from FI9010, please use snAgSaveConfig Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agent is writing NVRAM flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: write(3).....do write The agent will return a response even before the write is done. And the read value will be writing until write is done. And the write request will be rejected until error or normal. +.1.3.6.1.4.1.1991.1.1.2.1.4,FOUNDRY-SN-AGENT-MIB::snAgConfigFromNVRAM,INTEGER,not-accessible,,deprecated,normal(1):error(2):config(3):configing(4):busy(5),This object is not supported from FI9010, Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configing(4)...configing from NVRAM flash is in process. busy(5).......operation not allowed at this time, flash is busy The following value can be written: config(3).....do config The agent will return a response after config is done. .1.3.6.1.4.1.1991.1.1.2.1.5,FOUNDRY-SN-AGENT-MIB::snAgTftpServerIp,IpAddress,read-write,,deprecated,,The tftp server address, this will be used for both download/upload image file and config file. .1.3.6.1.4.1.1991.1.1.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgImgFname,OCTET,read-write,,current,,Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. -.1.3.6.1.4.1.1991.1.1.2.1.7,FOUNDRY-SN-AGENT-MIB::snAgImgLoad,INTEGER,read-write,,current,normal(1):flashPrepareReadFailure(2):flashReadError(3):flashPrepareWriteFailure(4):flashWriteError(5):tftpTimeoutError(6):tftpOutOfBufferSpace(7):tftpBusy(8):tftpRemoteOtherErrors(9):tftpRemoteNoFile(10):tftpRemoteBadAccess(11):tftpRemoteDiskFull(12):tftpRemoteBadOperation(13):tftpRemoteBadId(14):tftpRemoteFileExists(15):tftpRemoteNoUser(16):operationError(17):loading(18):uploadMPPrimary(19):downloadMPPrimary(20):uploadMPSecondary(21):downloadMPSecondary(22):tftpWrongFileType(23):downloadSPPrimary(24):downloadSPSecondary(25):uploadMPBootROM(26):downloadMPBootROM(27):uploadMPBootTFTP(28):downloadMPBootTFTP(29):uploadMPMonitor(30):downloadMPMonitor(31):downloadSPBootROM(32):downloadSPMonitor(33),Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loading(18) .. operation is in process. The following values are used for set : uploadMPPrimary(19)..upload the Primary image from MP flash to tftp server. downloadMPPrimary(20)..download the Primary image from tftp server to MP flash. uploadMPSecondary(21)..upload the Secondary image from MP flash to tftp server. downloadMPSecondary(22)..download the Secondary image from tftp server to MP flash. downloadSPPrimary(24)..download the Primary image from tftp server to SP flash. downloadSPSecondary(25)..download the Secondary image from tftp server to SP flash. uploadMPBootROM(26)..upload the Boot from flash image from MP flash to tftp server. downloadMPBootROM(27)..download the Boot from flash image from tftp server to MP flash. uploadMPBootTFTP(28)..upload the Boot from TFTP image from MP flash to tftp server. downloadMPBootTFTP(29)..download the Boot from TFTP image from tftp server to MP flash. uploadMPMonitor(30)..upload the Monitor image from MP flash to tftp server. downloadMPMonitor(31)..download the Monitor image from tftp server to MP flash. downloadSPBootROM(32)..download the Boot image from tftp server to SP flash. downloadSPMonitor(33)..download the Monitor image from tftp server to SP flash. MP is the management processor, SP is the switch processor. The image filename is defined in snAgImgFname. The tftp server address is defined in snAgTftpServerIp. Atomic set of snAgImgLoad, snAgImgFname and snAgTftpServerIp is required to allow down/up load to happen. And the write request will be rejected during loading until error or normal. +.1.3.6.1.4.1.1991.1.1.2.1.7,FOUNDRY-SN-AGENT-MIB::snAgImgLoad,INTEGER,read-write,,current,normal(1):flashPrepareReadFailure(2):flashReadError(3):flashPrepareWriteFailure(4):flashWriteError(5):tftpTimeoutError(6):tftpOutOfBufferSpace(7):tftpBusy(8):tftpRemoteOtherErrors(9):tftpRemoteNoFile(10):tftpRemoteBadAccess(11):tftpRemoteDiskFull(12):tftpRemoteBadOperation(13):tftpRemoteBadId(14):tftpRemoteFileExists(15):tftpRemoteNoUser(16):operationError(17):loading(18):uploadMPPrimary(19):downloadMPPrimary(20):uploadMPSecondary(21):downloadMPSecondary(22):tftpWrongFileType(23):downloadSPPrimary(24):downloadSPSecondary(25):uploadMPBootROM(26):downloadMPBootROM(27):uploadMPBootTFTP(28):downloadMPBootTFTP(29):uploadMPMonitor(30):downloadMPMonitor(31):downloadSPBootROM(32):downloadUfiPrimary(34):downloadUfiSecondary(35),Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loading(18) .. operation is in process. The following values are used for set : uploadMPPrimary(19)..upload the Primary image from MP flash to tftp server. downloadMPPrimary(20)..download the Primary image from tftp server to MP flash. uploadMPSecondary(21)..upload the Secondary image from MP flash to tftp server. downloadMPSecondary(22)..download the Secondary image from tftp server to MP flash. downloadSPPrimary(24)..download the Primary image from tftp server to SP flash. downloadSPSecondary(25)..download the Secondary image from tftp server to SP flash. uploadMPBootROM(26)..upload the Boot from flash image from MP flash to tftp server. downloadMPBootROM(27)..download the Boot from flash image from tftp server to MP flash. uploadMPBootTFTP(28)..upload the Boot from TFTP image from MP flash to tftp server. downloadMPBootTFTP(29)..download the Boot from TFTP image from tftp server to MP flash. uploadMPMonitor(30)..upload the Monitor image from MP flash to tftp server. downloadMPMonitor(31)..download the Monitor image from tftp server to MP flash. downloadSPBootROM(32)..download the Boot image from tftp server to SP flash. downloadUfiPrimary(34)..download the Primary UFI image from tftp server to flash. downloadUfiSecondary(35)..download the Secondary UFI image from tftp server to flash. MP is the management processor, SP is the switch processor. The image filename is defined in snAgImgFname. The tftp server address is defined in snAgTftpServerIp. Atomic set of snAgImgLoad, snAgImgFname and snAgTftpServerIp is required to allow down/up load to happen. And the write request will be rejected during loading until error or normal. .1.3.6.1.4.1.1991.1.1.2.1.8,FOUNDRY-SN-AGENT-MIB::snAgCfgFname,OCTET,read-write,,current,,Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple file names instead of a single file name. Multiple names are specified as a list of file names separated by semicolons (;). When the object is not used, the value is a zero length string. .1.3.6.1.4.1.1991.1.1.2.1.9,FOUNDRY-SN-AGENT-MIB::snAgCfgLoad,INTEGER,read-write,,current,normal(1):flashPrepareReadFailure(2):flashReadError(3):flashPrepareWriteFailure(4):flashWriteError(5):tftpTimeoutError(6):tftpOutOfBufferSpace(7):tftpBusy(8):tftpRemoteOtherErrors(9):tftpRemoteNoFile(10):tftpRemoteBadAccess(11):tftpRemoteDiskFull(12):tftpRemoteBadOperation(13):tftpRemoteBadId(14):tftpRemoteFileExists(15):tftpRemoteNoUser(16):operationError(17):loading(18):uploadFromFlashToServer(20):downloadToFlashFromServer(21):uploadFromDramToServer(22):downloadToDramFromServer(23):uploadFromFlashToNMS(24):downloadToFlashFromNMS(25):uploadFromDramToNMS(26):downloadToDramFromNMS(27):operationDoneWithNMS(28):tftpWrongFileType(29):downloadToDramFromServerOverwrite(30),Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongFileType(29). loading(18) .. operation is in process. The following value can be used to set: uploadFromFlashToServer(20)..upload the config from flash to tftp server. downloadToFlashFromServer(21)..download the config to flash from tftp server. uploadFromDramToServer(22)..upload the config from DRAM to tftp server. downloadToDramFromServer(23)..download the config to DRAM from tftp server. downloadToDramFromServerOverwrite(30)..download the config to DRAM from tftp server, clear the running-config, and overwrite with the new config. The following value can be used to set: uploadFromFlashToNMS(24)..upload the config from flash to NMS. downloadToFlashFromNMS(25)..download the config to flash from NMS. uploadFromDramToNMS(26)..upload the config from DRAM to NMS. downloadToDramFromNMS(27)..download the config to DRAM from NMS. The config filename is defined in snAgCfgFname. The tftp server address is defined in snAgTftpServerIp. Atomic set of snAgCfgLoad, snAgCfgFname and snAgTftpServerIp is required to allow down/up load to happen. And the write request will be rejected during loading until error or normal. For those NMS commands from (24) to (27), The snAgCfgEosTable MIB must be sent along in one PDU. A seperate write memory cli or set snAgWriteNVRAM is required to save the config to NVRAM. .1.3.6.1.4.1.1991.1.1.2.1.10,FOUNDRY-SN-AGENT-MIB::snAgDefGwayIp,IpAddress,read-write,,current,,The default gateway (router) address. @@ -3148,7 +3138,7 @@ .1.3.6.1.4.1.1991.1.1.2.1.12,FOUNDRY-SN-AGENT-MIB::snAgFlashImgVer,OCTET,read-only,,current,,The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, then the value is a zero length string. .1.3.6.1.4.1.1991.1.1.2.1.13,FOUNDRY-SN-AGENT-MIB::snAgGblIfIpAddr,IpAddress,read-write,,current,,The interface ip address. .1.3.6.1.4.1.1991.1.1.2.1.14,FOUNDRY-SN-AGENT-MIB::snAgGblIfIpMask,IpAddress,read-write,,current,,The interface ip address mask. -.1.3.6.1.4.1.1991.1.1.2.1.15,FOUNDRY-SN-AGENT-MIB::snAgGblPassword,OCTET,read-write,,current,,System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object needs to be in the same PDU while doing Set operation some critical SNMP objects. If command 'no snmp-server pw-check' is configured on the device, then this object is not needed in the PDU. The value of this object depends on the authentication method configured for SNMP. If there's no AAA authentication configuration for SNMP, this object will have the enable superuser password. If the AAA authentication for SNMP is configured and has leading method as enable or line, this object will have the corresponding enable or line password. If the switch has AAA authentication for SNMP operation, and the method specified is one of local, TACACS+, or RADIUS, this object will have format ' ' (note one space character in between). The max size allows concatenation of max 48 octets of username and 48 octets of password, with one blank character +.1.3.6.1.4.1.1991.1.1.2.1.15,FOUNDRY-SN-AGENT-MIB::snAgGblPassword,OCTET,read-write,,deprecated,,System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object needs to be in the same PDU while doing Set operation some critical SNMP objects. If command 'no snmp-server pw-check' is configured on the device, then this object is not needed in the PDU. The value of this object depends on the authentication method configured for SNMP. If there's no AAA authentication configuration for SNMP, this object will have the enable superuser password. If the AAA authentication for SNMP is configured and has leading method as enable or line, this object will have the corresponding enable or line password. If the switch has AAA authentication for SNMP operation, and the method specified is one of local, TACACS+, or RADIUS, this object will have format ' ' (note one space character in between). The max size allows concatenation of max 48 octets of username and 48 octets of password, with one blank character .1.3.6.1.4.1.1991.1.1.2.1.16,FOUNDRY-SN-AGENT-MIB::snAgTrpRcvrCurEntry,INTEGER,read-only,,current,,The current total entries of the Trap Receiver Table are created. .1.3.6.1.4.1.1991.1.1.2.1.19,FOUNDRY-SN-AGENT-MIB::snAgGblDataRetrieveMode,INTEGER,read-write,,current,nextbootCfg(0):operationalData(1),By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nextboot configuration data are retrieved operationalData(1)..........the current running data are retrieved .1.3.6.1.4.1.1991.1.1.2.1.20,FOUNDRY-SN-AGENT-MIB::snAgSystemLog,OCTET,read-write,,current,,The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and followed by 4 bytes of secret code. login(1)..... a value for a NMS to login. heartbeat(2)... a value for the login NMS periodically to checkin; Otherwise, the Agent will automatically set this object to logout(3) after a timeout period. logout(3).... a value for a NMS to logout. changePassword(4).... a value for the login NMS to change password, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. changeReadOnlyCommunity(5).... a value for the login NMS to change the read-only community string, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. changeReadWriteCommunity(6).... a value for the login NMS to change the read-write community string, only if snAgGblPasswordChangeMode was configured to 'anyMgmtEntity'. @@ -3166,9 +3156,9 @@ .1.3.6.1.4.1.1991.1.1.2.1.32,FOUNDRY-SN-AGENT-MIB::snAgGblDmaFailure,INTEGER,read-only,,current,false(0):true(1),false - The device DMAs are in good condition. true - One of the DMAs in the device fails. .1.3.6.1.4.1.1991.1.1.2.1.33,FOUNDRY-SN-AGENT-MIB::snAgGblResourceLowWarning,INTEGER,read-only,,current,false(0):true(1),false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. .1.3.6.1.4.1.1991.1.1.2.1.34,FOUNDRY-SN-AGENT-MIB::snAgGblExcessiveErrorWarning,INTEGER,read-only,,current,false(0):true(1),false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have. -.1.3.6.1.4.1.1991.1.1.2.1.35,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtilData,Gauge32,read-only,,current,,The statistics collection of utilization of the CPU in the device. In NetIron and FastIron platforms, reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect. +.1.3.6.1.4.1.1991.1.1.2.1.35,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtilData,Gauge32,read-only,,current,,The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect. .1.3.6.1.4.1.1991.1.1.2.1.36,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtilCollect,INTEGER,read-write,,deprecated,disabled(0):enabled(1),enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the CPU in the device. This object is deprecated. User need not set this object. User can read snAgGblCpuUtilData to reset all the counters. -.1.3.6.1.4.1.1991.1.1.2.1.37,FOUNDRY-SN-AGENT-MIB::snAgGblTelnetTimeout,Integer32,read-write,,current,,Telnet session idling timeout value. Each value unit is one minute. FastIron and NetIron platforms support value upto 240 minutes. On these platforms, value 0 means telnet sessions do not timeout. +.1.3.6.1.4.1.1991.1.1.2.1.37,FOUNDRY-SN-AGENT-MIB::snAgGblTelnetTimeout,INTEGER,read-write,,current,,Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. .1.3.6.1.4.1.1991.1.1.2.1.38,FOUNDRY-SN-AGENT-MIB::snAgGblEnableWebMgmt,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable web management. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.1.2.1.39,FOUNDRY-SN-AGENT-MIB::snAgGblSecurityLevelBinding,Integer32,read-only,,current,,This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. .1.3.6.1.4.1.1991.1.1.2.1.40,FOUNDRY-SN-AGENT-MIB::snAgGblEnableSLB,INTEGER,read-only,,current,disabled(0):enabled(1),Enable/disable Server Load Balancing. @@ -3180,26 +3170,31 @@ .1.3.6.1.4.1.1991.1.1.2.1.46,FOUNDRY-SN-AGENT-MIB::snAgGblTelnetPassword,OCTET,read-write,,current,,Telnet Access Password and this is only useful for write operation. A read operation get a null string. Set operation on this object is allowed only if command 'password-change any' is configured on the target device. Another configuration affecting this is 'no snmp-server pw-check'. If its configured on the device, there's no need to pass another varbind snAgGblPassword. By default, 'snmp-server pw-check' is true, and thus needs to have snAgGblPassword along with this object. in the same Set PDU. .1.3.6.1.4.1.1991.1.1.2.1.47,FOUNDRY-SN-AGENT-MIB::snAgBuildDate,OCTET,read-only,,current,,The date of the built software. .1.3.6.1.4.1.1991.1.1.2.1.48,FOUNDRY-SN-AGENT-MIB::snAgBuildtime,OCTET,read-only,,current,,The time of the built software. -.1.3.6.1.4.1.1991.1.1.2.1.49,FOUNDRY-SN-AGENT-MIB::snAgBuildVer,OCTET,read-only,,current,,The image label of the built software +.1.3.6.1.4.1.1991.1.1.2.1.49,FOUNDRY-SN-AGENT-MIB::snAgBuildVer,OCTET,read-only,,current,,The version of the built software in the form 'major.minor.maintenance[letters]'. .1.3.6.1.4.1.1991.1.1.2.1.50,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtil1SecAvg,Gauge32,read-only,,current,,The statistics collection of 1 second CPU utilization. .1.3.6.1.4.1.1991.1.1.2.1.51,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtil5SecAvg,Gauge32,read-only,,current,,The statistics collection of 5 second CPU utilization. .1.3.6.1.4.1.1991.1.1.2.1.52,FOUNDRY-SN-AGENT-MIB::snAgGblCpuUtil1MinAvg,Gauge32,read-only,,current,,The statistics collection of 1 minute CPU utilization. -.1.3.6.1.4.1.1991.1.1.2.1.53,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemUtil,Gauge32,read-only,,deprecated,,The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil. For NI platforms, refer to snAgentBrdMemoryUtil100thPercent -.1.3.6.1.4.1.1991.1.1.2.1.54,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemTotal,Integer32,read-only,,deprecated,,The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal. For NI platforms, refer to snAgentBrdMemoryTotal -.1.3.6.1.4.1.1991.1.1.2.1.55,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemFree,Gauge32,read-only,,deprecated,,The free amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMFree. For NI platforms, refer to snAgentBrdMemoryAvailable +.1.3.6.1.4.1.1991.1.1.2.1.53,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemUtil,Gauge32,read-only,,deprecated,,The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil +.1.3.6.1.4.1.1991.1.1.2.1.54,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemTotal,Gauge32,read-only,,deprecated,,The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal +.1.3.6.1.4.1.1991.1.1.2.1.55,FOUNDRY-SN-AGENT-MIB::snAgGblDynMemFree,Gauge32,read-only,,deprecated,,The free amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMFree .1.3.6.1.4.1.1991.1.1.2.1.56,FOUNDRY-SN-AGENT-MIB::snAgImgLoadSPModuleType,INTEGER,read-write,,current,other(1):vm1(2):pos12(3):pos48(4):atm(5):gignpa(6):lp(7),The switch processor module type of which that receives the downloaded image. .1.3.6.1.4.1.1991.1.1.2.1.57,FOUNDRY-SN-AGENT-MIB::snAgImgLoadSPModuleNumber,Integer32,read-write,,current,,The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. .1.3.6.1.4.1.1991.1.1.2.1.58,FOUNDRY-SN-AGENT-MIB::snAgTrapHoldTime,INTEGER,read-write,,current,,The time in seconds for which traps will be witheld during system initialization. .1.3.6.1.4.1.1991.1.1.2.1.59,FOUNDRY-SN-AGENT-MIB::snAgSFlowSourceInterface,Integer32,read-write,,current,,Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indicates that source interface has not been configured for sFlow. Port 65534 is used to specify a null port. -.1.3.6.1.4.1.1991.1.1.2.1.60,FOUNDRY-SN-AGENT-MIB::snAgGblTelnetLoginTimeout,Integer32,read-write,,current,,Telnet session login timeout value in minutes. FastIron and NetIron platforms support value upto 10 minutes with a default of 2 minutes and 1 minutes for FastIron and NetIron respectively. +.1.3.6.1.4.1.1991.1.1.2.1.60,FOUNDRY-SN-AGENT-MIB::snAgGblTelnetLoginTimeout,INTEGER,read-write,,current,,Telnet session login timeout value in minutes. Default is 2 minutes. .1.3.6.1.4.1.1991.1.1.2.1.61,FOUNDRY-SN-AGENT-MIB::snAgGblBannerExec,OCTET,read-write,,current,,EXEC process creation banner. Insert newlines using '\n' within the string. .1.3.6.1.4.1.1991.1.1.2.1.62,FOUNDRY-SN-AGENT-MIB::snAgGblBannerIncoming,OCTET,read-write,,current,,Incoming terminal line banner. Insert newlines using '\n' within the string. .1.3.6.1.4.1.1991.1.1.2.1.63,FOUNDRY-SN-AGENT-MIB::snAgGblBannerMotd,OCTET,read-write,,current,,Message-of-the-day banner. Insert newlines using '\n' within the string. .1.3.6.1.4.1.1991.1.1.2.1.64,FOUNDRY-SN-AGENT-MIB::snAgWebMgmtServerTcpPort,INTEGER,read-write,,current,,The TCP port number of web management interface. .1.3.6.1.4.1.1991.1.1.2.1.65,FOUNDRY-SN-AGENT-MIB::snAgTftpServerAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2) DEFVAL { ipv4 } .1.3.6.1.4.1.1991.1.1.2.1.66,FOUNDRY-SN-AGENT-MIB::snAgTftpServerAddr,OCTET,read-write,,current,,TFTP server IP address. -.1.3.6.1.4.1.1991.1.1.2.1.67,FOUNDRY-SN-AGENT-MIB::snAgGblDeleteFirstBeforeDownload,INTEGER,read-write,,current,true(1):false(2),When set to true deletes the existing target file on the Management module flash. This object can be set to true only when the snAgImgLoad is set to downloadMPPrimary(20), downloadMPSecondary(22), downloadSPPrimary(24), downloadSPSecondary(25) or downloadMPMonitor(31) in the same SNMP set request PDU. This object is reset to false after successful or unsuccessful download of specified file to flash. Reading this object returns false(2). -.1.3.6.1.4.1.1991.1.1.2.1.68,FOUNDRY-SN-AGENT-MIB::snAgGblPasswordCheckMode,INTEGER,read-only,,current,enabled(1):disabled(2),enabled(1) -The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is disabled. When enabled all image/file related MIB object set requests PDU must include the password using the snAgGblPassword. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.2.1.68,FOUNDRY-SN-AGENT-MIB::snAgGblPasswordCheckMode,INTEGER,read-only,,current,enabled(1):disabled(2),enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is disabled. When enabled all image/file related MIB object set requests PDU must include the password using the snAgGblPassword. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.2.1.69,FOUNDRY-SN-AGENT-MIB::snAgGblEnableTelnetAuthentication,INTEGER,read-write,,current,disabled(0):enabled(1),Enable or disable telnet authentication in device. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.2.1.70,FOUNDRY-SN-AGENT-MIB::snAgGblManager2FactorAuthentication,INTEGER,read-write,,current,disabled(0):enabled(1),enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed and all incoming SSH sessions to device are closed when two-factor authentication is enabled. disabled(0) - The manager two-factor authentication is disabled. SSH access to device from sources other than SZ is allowed after manager two-factor authentication is disabled DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.2.1.71,FOUNDRY-SN-AGENT-MIB::snAgDefGwayIpv6,OCTET,read-only,,current,,The default ipv6 gateway (router) address. +.1.3.6.1.4.1.1991.1.1.2.1.72,FOUNDRY-SN-AGENT-MIB::snAgEraseConfig,INTEGER,read-write,,current,normal(1):error(2):erase(3):erasing(4):busy(5),Action object to erase start-up config from flash on the device. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is erasing from flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: erase(3).....do erase The agent will return a response even before the erase is done. And the read value will be erasing until erase is done. And the erase request will be rejected until error or normal. +.1.3.6.1.4.1.1991.1.1.2.1.73,FOUNDRY-SN-AGENT-MIB::snAgSaveConfig,INTEGER,read-write,,current,normal(1):error(2):write(3):writing(4):busy(5),Action object to save all configuration info to flash on the device. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agent is writing into flash busy(5).......operation not allowed at this time, flash is busy The following value can be written: write(3).....do write The agent will return a response even before the write is done. And the read value will be writing until write is done. And the write request will be rejected until error or normal. +.1.3.6.1.4.1.1991.1.1.2.1.74,FOUNDRY-SN-AGENT-MIB::snAgGblFirmWareDownLoadState,INTEGER,read-only,,current,start(0):validateParameters(1):downloading(2):validatingImage(3):syncingToRemote(4):writingToFlash(5):complete(6):failed(7),The firmware download status represents the current state of a firmware download operation. DEFVAL { start } .1.3.6.1.4.1.1991.1.1.2.2,FOUNDRY-SN-AGENT-MIB::snAgentBrd,,,,,, .1.3.6.1.4.1.1991.1.1.2.2.1,FOUNDRY-SN-AGENT-MIB::snAgentBrdTable,,not-accessible,,current,,A table of each physical board information. .1.3.6.1.4.1.1991.1.1.2.2.1.1,FOUNDRY-SN-AGENT-MIB::snAgentBrdEntry,,not-accessible,snAgentBrdIndex,current,,A row in the Agent Board table. @@ -3210,28 +3205,26 @@ .1.3.6.1.4.1.1991.1.1.2.2.1.1.5,FOUNDRY-SN-AGENT-MIB::snAgentBrdExpBrdDescription,OCTET,read-only,,current,,The expansion board description string. Expansion board are those boards attaching on the main board. .1.3.6.1.4.1.1991.1.1.2.2.1.1.6,FOUNDRY-SN-AGENT-MIB::snAgentBrdExpBrdId,OCTET,read-only,,current,,The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - expansion board type, HUNDRED_MEG_1PORT=1, HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3, HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5, GIGA_1PORT=8, GIGA_2PORT=9 octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 .1.3.6.1.4.1.1991.1.1.2.2.1.1.7,FOUNDRY-SN-AGENT-MIB::snAgentBrdExpPortTotal,INTEGER,read-only,,current,,The total number of ports for the expansion board. -.1.3.6.1.4.1.1991.1.1.2.2.1.1.8,FOUNDRY-SN-AGENT-MIB::snAgentBrdStatusLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 32 that means 32 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdStatusLedString) -.1.3.6.1.4.1.1991.1.1.2.2.1.1.9,FOUNDRY-SN-AGENT-MIB::snAgentBrdTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTrafficLedString) +.1.3.6.1.4.1.1991.1.1.2.2.1.1.8,FOUNDRY-SN-AGENT-MIB::snAgentBrdStatusLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 32 that means 32 Ports Status LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdStatusLedString) +.1.3.6.1.4.1.1991.1.1.2.2.1.1.9,FOUNDRY-SN-AGENT-MIB::snAgentBrdTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTrafficLedString) .1.3.6.1.4.1.1991.1.1.2.2.1.1.10,FOUNDRY-SN-AGENT-MIB::snAgentBrdMediaLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Media LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdMediaLedString) .1.3.6.1.4.1.1991.1.1.2.2.1.1.11,FOUNDRY-SN-AGENT-MIB::snAgentBrdSpeedLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Speed LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 10 MBit 1 100 MBit The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdSpeedLedString) -.1.3.6.1.4.1.1991.1.1.2.2.1.1.12,FOUNDRY-SN-AGENT-MIB::snAgentBrdModuleStatus,INTEGER,read-only,,current,moduleEmpty(0):moduleGoingDown(2):moduleRejected(3):moduleBad(4):moduleConfigured(8):moduleComingUp(9):moduleRunning(10):moduleBlocked(11),By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running. moduleBlocked(11) ....... The module is blocked, for full height card. +.1.3.6.1.4.1.1991.1.1.2.2.1.1.12,FOUNDRY-SN-AGENT-MIB::snAgentBrdModuleStatus,INTEGER,read-only,,current,moduleEmpty(0):moduleGoingDown(2):moduleRejected(3):moduleBad(4):moduleConfigured(8):moduleComingUp(9):moduleRunning(10),By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running. .1.3.6.1.4.1.1991.1.1.2.2.1.1.13,FOUNDRY-SN-AGENT-MIB::snAgentBrdRedundantStatus,INTEGER,read-only,,current,other(1):active(2):standby(3):crashed(4):comingUp(5),The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. .1.3.6.1.4.1.1991.1.1.2.2.1.1.14,FOUNDRY-SN-AGENT-MIB::snAgentBrdAlarmLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Speed LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 no alarm 1 alarm The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdAlarmLedString) -.1.3.6.1.4.1.1991.1.1.2.2.1.1.15,FOUNDRY-SN-AGENT-MIB::snAgentBrdTxTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Transmit Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTxTrafficLedString) -.1.3.6.1.4.1.1991.1.1.2.2.1.1.16,FOUNDRY-SN-AGENT-MIB::snAgentBrdRxTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Receive Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdRxTrafficLedString) -.1.3.6.1.4.1.1991.1.1.2.2.1.1.17,FOUNDRY-SN-AGENT-MIB::snAgentBrdStatusLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- -.1.3.6.1.4.1.1991.1.1.2.2.1.1.18,FOUNDRY-SN-AGENT-MIB::snAgentBrdTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.2.2.1.1.15,FOUNDRY-SN-AGENT-MIB::snAgentBrdTxTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Transmit Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdTxTrafficLedString) +.1.3.6.1.4.1.1991.1.1.2.2.1.1.16,FOUNDRY-SN-AGENT-MIB::snAgentBrdRxTrafficLeds,Integer32,read-only,,deprecated,,A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one chassis is 24 that means 24 Ports Receive Traffic LEDs. The expansion port number always begins from the last main port number. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 (It was obsoleted after release 07100, replaced by snAgentBrdRxTrafficLedString) +.1.3.6.1.4.1.1991.1.1.2.2.1.1.17,FOUNDRY-SN-AGENT-MIB::snAgentBrdStatusLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (Link off) 1 on (Link on) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.2.2.1.1.18,FOUNDRY-SN-AGENT-MIB::snAgentBrdTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no traffic) 1 on (traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- .1.3.6.1.4.1.1991.1.1.2.2.1.1.19,FOUNDRY-SN-AGENT-MIB::snAgentBrdMediaLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 half duplex 1 full duplex The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- .1.3.6.1.4.1.1991.1.1.2.2.1.1.20,FOUNDRY-SN-AGENT-MIB::snAgentBrdSpeedLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 10 MBit 1 100 MBit The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- .1.3.6.1.4.1.1991.1.1.2.2.1.1.21,FOUNDRY-SN-AGENT-MIB::snAgentBrdAlarmLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning --------- ------- 0 no alarm 1 alarm The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 --------- -.1.3.6.1.4.1.1991.1.1.2.2.1.1.22,FOUNDRY-SN-AGENT-MIB::snAgentBrdTxTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- -.1.3.6.1.4.1.1991.1.1.2.2.1.1.23,FOUNDRY-SN-AGENT-MIB::snAgentBrdRxTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.2.2.1.1.22,FOUNDRY-SN-AGENT-MIB::snAgentBrdTxTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no transmit traffic) 1 on (transmit traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- +.1.3.6.1.4.1.1991.1.1.2.2.1.1.23,FOUNDRY-SN-AGENT-MIB::snAgentBrdRxTrafficLedString,OCTET,read-only,,current,,A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each switch port. The following shows the meaning of each bit for each switch port: bit value meaning -------- --------- 0 off (no receive traffic) 1 on (receive traffic) The bitmap of LEDs are as following: (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 -------- .1.3.6.1.4.1.1991.1.1.2.2.1.1.24,FOUNDRY-SN-AGENT-MIB::snAgentBrdMemoryTotal,Counter64,read-only,,current,,The total memory in bytes within this module. .1.3.6.1.4.1.1991.1.1.2.2.1.1.25,FOUNDRY-SN-AGENT-MIB::snAgentBrdMemoryAvailable,Counter64,read-only,,current,,The total memory in bytes available for use within this module. .1.3.6.1.4.1.1991.1.1.2.2.1.1.26,FOUNDRY-SN-AGENT-MIB::snAgentBrdSerialNumber,OCTET,read-only,,current,,The Board Serial number. Zero length string indicates that module serial number has not been programmed within EEPROM or the module does not support serial number within EEPROM. .1.3.6.1.4.1.1991.1.1.2.2.1.1.27,FOUNDRY-SN-AGENT-MIB::snAgentBrdPartNumber,OCTET,read-only,,current,,The Board Part number. Zero length string indicates that module part number has not been programmed within EEPROM or the module does not support part number within EEPROM. -.1.3.6.1.4.1.1991.1.1.2.2.1.1.28,FOUNDRY-SN-AGENT-MIB::snAgentBrdMemoryUtil100thPercent,Unsigned32,read-only,,current,,Dynamic memory utilization within this module in units of one-hundredth of a percent. -.1.3.6.1.4.1.1991.1.1.2.2.1.1.29,FOUNDRY-SN-AGENT-MIB::snAgentBrdUpTime,TimeTicks,read-only,,current,,Uptime for this module in units of one-hundredth of a second. This value is only valid if the value of snAgentBrdModuleStatus is moduleRunning. .1.3.6.1.4.1.1991.1.1.2.2.2,FOUNDRY-SN-AGENT-MIB::snAgentBrd2Table,,not-accessible,,current,,A table of each physical board information for each unit. .1.3.6.1.4.1.1991.1.1.2.2.2.1,FOUNDRY-SN-AGENT-MIB::snAgentBrd2Entry,,not-accessible,snAgentBrd2Unit:snAgentBrd2Slot,current,,A row in the Agent Board table. .1.3.6.1.4.1.1991.1.1.2.2.2.1.1,FOUNDRY-SN-AGENT-MIB::snAgentBrd2Unit,Integer32,read-only,,current,,The index to the Agent module Table. @@ -3239,7 +3232,7 @@ .1.3.6.1.4.1.1991.1.1.2.2.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgentBrd2MainBrdDescription,OCTET,read-only,,current,,The main board description string. .1.3.6.1.4.1.1991.1.1.2.2.2.1.4,FOUNDRY-SN-AGENT-MIB::snAgentBrd2MainBrdId,OCTET,read-only,,current,,The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type: BI_WG 0x57 BI_BB 0x42 BI_NI 0x4E BI_NI2 0x32 NI_M4 0x4D BI_SLB 0x53 octet 2 - module type: MASTER_FIBER_8G 0x0 MASTER_FIBER_4G 0x1 MASTER_COPPER_16 0x2 SLAVE_FIBER_4G 0x3 FI_MASTER_FIBER_2G 0x4 FI_MASTER_FIBER_4G 0x5 MASTER_COPPER_8G 0x6 FI_MASTER_FIBER_8G 0x7 SLAVE_FIBER_8G 0x8 MASTER_COPPER_12_2 0x9 SLAVE_COPPER_24 0xA FI_SLAVE_COPPER_24 0xB SLAVE_100FX_8 0xD SLAVE_100FX_16 0xC SLAVE_COPPER_8G 0xE SLAVE_COPPER_16_2 0xF STACK_FIBER_8G 0x10 STACK_COPPER_8G 0x11 MASTER_FIBER_2G 0x12 SLAVE_100FX_24 0x13 MASTER_FIBER_0G 0x14 POS_622M 0x15 POS_155M 0x16 SLAVE_FIBER_2G 0x17 SLAVE_COPPER_2G 0x18 FI_SLAVE_FIBER_2G 0x19 FI_SLAVE_FIBER_4G 0x1A FI_SLAVE_FIBER_8G 0x1B FI_SLAVE_COPPER_8G 0x1C FI_MASTER_COPPER_8G 0x1D POS_155M2P 0x1E FI_MASTER_COPPER_4G 0x1F FI_MASTER_COPPER_2G 0x20 MASTER_COPPER_4G 0x21 MASTER_COPPER_2G 0x22 MASTER_M4_8G 0x23 MASTER_M4_4G 0x24 MASTER_M4_2G 0x25 MASTER_M4_0G 0x26 MASTER_M5_0G 0x27 POS_2488M 0x28 SLAVE_M5_0G 0x29 POS_N2488M 0x2A STACK_IPC_48_2 0x2B SLAVE_NPA_FIBER_4G 0x2C ATM_2PORT 0x2D ATM_4PORT 0x2E SLAVE_FIBER_10G 0x2F STACK_FES_48_2 0x30 STACK_FES_24_2 0x31 STACK_FES_96_4 0x32 STACK_FES_12G 0x33 STACK_FESX_24G 0x34 STACK_FESX_24_2_G 0x35 STACK_FESX_24_1_G 0x36 STACK_FESX_48G 0x37 STACK_FESX_48_2_G 0x38 STACK_FESX_48_1_G 0x39 SUPERX_FI_MGMT 0x40 SUPERX_FI_2P10G 0x41 SUPERX_FI_24GC 0x42 SUPERX_FI_24GF 0x43 SUPERX_FI_2P10G_WAN 0x44 SUPERX_FI_MGMT_II 0x4a SLAVE_JC_48E 0xC3 SLAVE_JC_48T 0xC4 MASTER_JC_M4_8G 0xC5 SLAVE_JC_8G 0xC6 SLAVE_JC_B16GF 0xC8 MASTER_JC_B2404 0xC9 SLAVE_JC_B16GC 0xCA octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9, PVR_M8245=81 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_X10GMAC_10000=4, MAC_SEEQ_1000=5, MAC_GMAC_1000=6, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 (for 10G), PHY_3COM_10_100=9 (for others) octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. octet 28 - chassis backplane type. chassis4000 = 0x00 chassis8000 = 0x02 chassis15000 = 0x01 chassisFISX = 0x04 Turbo8 = 0x07 (stack2) FastIron2 = 0x06 (stack1) .1.3.6.1.4.1.1991.1.1.2.2.2.1.5,FOUNDRY-SN-AGENT-MIB::snAgentBrd2MainPortTotal,Integer32,read-only,,current,,The total number of ports for the main board. -.1.3.6.1.4.1.1991.1.1.2.2.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgentBrd2ModuleStatus,INTEGER,read-only,,current,moduleEmpty(0):moduleGoingDown(2):moduleRejected(3):moduleBad(4):moduleConfigured(8):moduleComingUp(9):moduleRunning(10):moduleBlocked(11),By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running. moduleBlocked(11) ....... The module is blocked, for full height card. +.1.3.6.1.4.1.1991.1.1.2.2.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgentBrd2ModuleStatus,INTEGER,read-only,,current,moduleEmpty(0):moduleGoingDown(2):moduleRejected(3):moduleBad(4):moduleConfigured(8):moduleComingUp(9):moduleRunning(10),By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. moduleRejected(3) ...... The module is being rejected due to wrong configuration. moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. moduleRunning(10) ....... The module is running. .1.3.6.1.4.1.1991.1.1.2.2.2.1.7,FOUNDRY-SN-AGENT-MIB::snAgentBrd2RedundantStatus,INTEGER,read-only,,current,other(1):active(2):standby(3):crashed(4):comingUp(5),The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. .1.3.6.1.4.1.1991.1.1.2.3,FOUNDRY-SN-AGENT-MIB::snAgentTrp,,,,,, .1.3.6.1.4.1.1991.1.1.2.3.1,FOUNDRY-SN-AGENT-MIB::snAgTrpRcvrTable,,not-accessible,,deprecated,,A table of managers which to send traps. @@ -3268,11 +3261,11 @@ .1.3.6.1.4.1.1991.1.1.2.4.2.1.5,FOUNDRY-SN-AGENT-MIB::snAgSpBootSeqFilename,OCTET,read-write,,current,,The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. .1.3.6.1.4.1.1991.1.1.2.4.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgSpBootSeqRowStatus,INTEGER,read-write,,current,valid(1):delete(2):create(3),To create or delete a boot sequence table entry. .1.3.6.1.4.1.1991.1.1.2.5,FOUNDRY-SN-AGENT-MIB::snAgCfgEos,,,,,, -.1.3.6.1.4.1.1991.1.1.2.5.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosTable,,not-accessible,,current,,This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file download, and a SNMP-GET represents configuration file upload. This action is only if the SNMP-SET of snAgCfgLoad command is sent along with this table consecutively. The applicable snAgCfgLoad command value is as followings: uploadFromFlashToNMS(23), downloadToFlashFromNMS(24), uploadFromDramToNMS(25), downloadToDramFromNMS(26). -.1.3.6.1.4.1.1991.1.1.2.5.1.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosEntry,,not-accessible,snAgCfgEosIndex,current,,An EOS row in the table of encoded octet strings for table snAgCfgEosTable. -.1.3.6.1.4.1.1991.1.1.2.5.1.1.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosIndex,Integer32,read-only,,current,,Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. -.1.3.6.1.4.1.1991.1.1.2.5.1.1.2,FOUNDRY-SN-AGENT-MIB::snAgCfgEosPacket,OCTET,read-write,,current,,An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equal to 1400 bytes. -.1.3.6.1.4.1.1991.1.1.2.5.1.1.3,FOUNDRY-SN-AGENT-MIB::snAgCfgEosChkSum,Integer32,read-write,,current,,A checksum of each configuration file data packet. +.1.3.6.1.4.1.1991.1.1.2.5.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosTable,,not-accessible,,deprecated,,This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file download, and a SNMP-GET represents configuration file upload. This action is only if the SNMP-SET of snAgCfgLoad command is sent along with this table consecutively. The applicable snAgCfgLoad command value is as followings: uploadFromFlashToNMS(23), downloadToFlashFromNMS(24), uploadFromDramToNMS(25), downloadToDramFromNMS(26). +.1.3.6.1.4.1.1991.1.1.2.5.1.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosEntry,,not-accessible,snAgCfgEosIndex,deprecated,,An EOS row in the table of encoded octet strings for table snAgCfgEosTable. +.1.3.6.1.4.1.1991.1.1.2.5.1.1.1,FOUNDRY-SN-AGENT-MIB::snAgCfgEosIndex,Integer32,read-only,,deprecated,,Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. +.1.3.6.1.4.1.1991.1.1.2.5.1.1.2,FOUNDRY-SN-AGENT-MIB::snAgCfgEosPacket,OCTET,read-write,,deprecated,,An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equal to 1400 bytes. +.1.3.6.1.4.1.1991.1.1.2.5.1.1.3,FOUNDRY-SN-AGENT-MIB::snAgCfgEosChkSum,Integer32,read-write,,deprecated,,A checksum of each configuration file data packet. .1.3.6.1.4.1.1991.1.1.2.6,FOUNDRY-SN-AGENT-MIB::snAgentLog,,,,,, .1.3.6.1.4.1.1991.1.1.2.6.1,FOUNDRY-SN-AGENT-MIB::snAgSysLogGbl,,,,,, .1.3.6.1.4.1.1991.1.1.2.6.1.1,FOUNDRY-SN-AGENT-MIB::snAgSysLogGblEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable system logging. DEFVAL { enabled } @@ -3318,25 +3311,25 @@ .1.3.6.1.4.1.1991.1.1.2.8.1,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleTable,,not-accessible,,current,,A table of each configured module information. .1.3.6.1.4.1.1991.1.1.2.8.1.1,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleEntry,,not-accessible,snAgentConfigModuleIndex,current,,A row in the Agent Configured Module table. .1.3.6.1.4.1.1991.1.1.2.8.1.1.1,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleIndex,Integer32,read-only,,current,,The index to the Agent Configured Module Table. -.1.3.6.1.4.1.1991.1.1.2.8.1.1.2,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleType,INTEGER,read-write,,current,bi8PortGigManagementModule(0):bi4PortGigManagementModule(1):bi16PortCopperManagementModule(2):bi4PortGigModule(3):fi2PortGigManagementModule(4):fi4PortGigManagementModule(5):bi8PortGigCopperManagementModule(6):fi8PortGigManagementModule(7):bi8PortGigModule(8):bi12PortGigCopper2PortGigFiberManagement(9):bi24PortCopperModule(10):fi24PortCopperModule(11):bi16Port100FXModule(12):bi8Port100FXModule(13):bi8PortGigCopperModule(14):bi12PortGigCopper2PortGigFiber(15):bi2PortGigManagementModule(18):bi24Port100FXModule(19):bi0PortManagementModule(20):pos622MbsModule(21):pos155MbsModule(22):bi2PortGigModule(23):bi2PortGigCopperModule(24):fi2PortGigModule(25):fi4PortGigModule(26):fi8PortGigModule(27):fi8PortGigCopperModule(28):fi8PortGigCopperManagementModule(29):pos155Mbs2PModule(30):fi4PortGigCopperManagementModule(31):fi2PortGigCopperManagementModule(32):bi4PortGigCopperManagementModule(33):bi2PortGigCopperManagementModule(34):bi8PortGigM4ManagementModule(35):bi4PortGigM4ManagementModule(36):bi2PortGigM4ManagementModule(37):bi0PortGigM4ManagementModule(38):bi0PortWSMManagementModule(39):biPos2Port2488MbsModule(40):bi0PortWSMModule(41):niPos2Port2488MbsModule(42):ni4802(43):bi4PortGigNPAModule(44):biAtm2Port155MbsModule(45):biAtm4Port155MbsModule(46):bi1Port10GigModule(47):fes4802Module(48):fes2402Module(49):fes9604Module(50):fes12GigCopperAndGigFiberModule(51):fesx24GigModule(52):fesx24Gig2TenGigModule(53):fesx24Gig1TenGigModule(54):fesx48GigModule(55):fesx48Gig2TenGigModule(56):fesx48Gig1TenGigModule(57):bi40PortGigCopperHVModule(58):bi60PortGigCopperHVModule(59):bi8Port10GigModule(60):bi10PortGigHVModule(61):bi20PortGigHVModule(62):bi24PortGigModule(63):bi24PortGigCopperModule(64):bi48PortGigCopperModule(65):bi24PortGigFiberModule(66):ni4Port10GigSPModule(75):ni40PortGigSPModule(76):ni40PortGigCopperSPModule(77):ni2Port10GigSPModule(78):ni10PortGigSPModule(79):ni20PortGigSPModule(80):xmr4Port10GigSPModule(81):xmr20PortGigSPModule(82):xmr2Port10GigSPModule(83):xmr20PortGigCopperSPModule(84):xmr20PortGigFXSPModule(85):niImrMrManagementModule(86):niXmrMrManagementModule(87):xer4Port10GigSPModule(88):xer2Port10GigSPModule(89):xer20PortGigCopperSPModule(90):xer20PortGigFXSPModule(91):mlx4Port10GigSPModule(92):mlx2Port10GigSPModule(93):mlx20PortGigCopperSPModule(94):mlx20PortGigFXSPModule(95):mlx48PortGigMrj21SPModule(103):fesx24GigFiberGigCopperModule(112):fesx24GigFiber2TenGigModule(113):fesx24GigFiber1TenGigModule(114):fgs24PortManagementModule(144):fgs48PortManagementModule(145):fgsXfp2Port10gModule(152):fgsCx42Port10gModule(153):fgsXfp1Cx41Port10gModule(154):fgsXpf1Port10gModule(155):fls24PortCopperBaseModule(160):fls48PortCopperBaseModule(161):flsXfp1Port10gModule(168):flsCx41Port10gModule(169):fcx624SBaseModule(176):fcx648SBaseModule(177):fcx624SPoeBaseModule(180):fcx648SPoeBaseModule(181):fcxXfp2Port10gModule(184):fcxCx42Port16gModule(185):fcx624SFBaseModule(192):biFiJc48ePort100fxIpcModule(195):biFiJc48tPort100fxIpcModule(196):biFiJc8PortGigM4ManagementModule(197):biFiJc8PortGigIgcModule(198):biFiJc16PortGigIgcModule(200):biJc24PortCopperIpc4GigIgcModule(201):biJc16PortGigCopperIgcModule(202):biFiJc24Port100fxIpcModule(206):bi2Port10GigModule(207):biJc48tPortRJ21OmpModule(208):biJc48ePortRJ45OmpModule(209):biJc24PortIpcRJ45PoeModule(212):biJc2PortGigIgcM4ManagementModule(214):fdryBi4Port10GigModule(1048):fdryBi40PortGigModule(1049):fdryBi1Port100FXManagementModule(1050):fdryBi2Port10GigModule(1051):fdryBi40PortGigCopperModule(1052):fdryBi60PortGigCopperModule(1053):fdryBi4Port10GigHVModule(1054):fdryBi2Port10GigHVModule(1055):fdryBi8Port10GigHVModule(1056):fdryBi40PortGigHVModule(1057):fdryBi40PortGigCopperHVModule(1058):fdryBi60PortGigCopperHVModule(1059):fdryBi8Port10GigModule(1060):fdryBi10PortGigHVModule(1061):fdryBi20PortGigHVModule(1062):fdryBi24PortGigModule(1063):fdryBi24PortGigCopperModule(1064):fdryBi48PortGigCopperModule(1065):fdryBi24PortGigFiberModule(1066):fdryBi16Port10GigModule(1067):fdryNi4Port10GigSPModule(1075):fdryNi40PortGigSPModule(1076):fdryNi40PortGigCopperSPModule(1077):fdryNi2Port10GigSPModule(1078):fdryNi10PortGigSPModule(1079):fdryNi20PortGigSPModule(1080):fdryXmr4Port10GigSPModule(1081):fdryXmr20PortGigSPModule(1082):fdryXmr2Port10GigSPModule(1083):fdryXmr20PortGigCopperSPModule(1084):fdryXmr20PortGigFXSPModule(1085):fdryNiImrMrManagementModule(1086):fdryNiXmrMrManagementModule(1087):fdryMlx4Port10GigSPModule(1088):fdryMlx2Port10GigSPModule(1089):fdryMlx20PortGigCopperSPModule(1090):fdryMlx20PortGigFXSPModule(1091):niMlx8Port10GigSPModule(1092):brMlx4Port10GigXModule(1093):brMlx24PortGigCopperXModule(1094):brMlx24PortGigSfpXModule(1095):niCes24PortFiberModule(1096):niCes24PortCopperModule(1097):niCes2Port10GigModule(1098):niCes48PortFiberModule(1099):niCes48PortCopperModule(1100):niCes48PortFiberWith2Port10GModule(1101):niCes48PortCopperWith2Port10GModule(1102):fdryMlx48PortGigMrj21SPModule(1103):fdryXmr2PortOC192SPModule(1104):fdryXmr1PortOC192SPModule(1105):fdryXmr8PortOC48SPModule(1106):fdryXmr4PortOC48SPModule(1107):fdryXmr2PortOC48SPModule(1108):fdryNiMlxMrManagementModule(1109):niMlx8Port10GigMModule(1110):niMlx8Port10GigDModule(1111):brMlx8Port10GigXModule(1112):brMlx2Port100GigXModule(1113):brcdMlxMr2ManagementModule(1114):brcdXmrMr2ManagementModule(1115):brcdMlx32Mr2ManagementModule(1116):brcdXmr32Mr2ManagementModule(1117):brcdNiXmr32MrManagementModule(1118):brcdNiMlx32MrManagementModule(1119):brcdMlx24Port10GigDMModule(1120):brMlx4Port40GigMModule(1121):brcdNiCes4Port10GigModule(1122):brMlx2Port100GigCFP2Module(1123):brMlx20Port10GigModule(1124):brMlx4Port10GigXIPSecModule(1125):fdryFiV4Sx12ComboPortManagementModule(2064):fdryFiV4Sx2Port10gModule(2065):fdryFiV4Sx24PortGigCopperModule(2066):fdryFiV4Sx24PortGigFiberModule(2067):fdryFiV4Sx2Port10gLanWanModule(2068):fdryFiV4Sx24Port100m1gFiberModule(2069):fdryFiV4Sx12ComboPortManagement2Module(2074):fdryFiV4Sx210gPortManagementModule(2080):fdryFiSx0PortManagementModule(2081):fdryFiV4Sx4g4fPortManagementModule(2083):fdryFiV6Sx12ComboPortManagementModule(2096):fdryFiV6Sx24PortGigCopperModule(2098):fdryFiV6Sx2Port10gModule(2100):fdryFiV6Sx24Port100m1gFiberModule(2101):fdryFiV6Sx210gPortManagementModule(2102):fdryFiV6Sx48PortGigCopperPoeModule(2103):fdryFiV6Sx4g4fPortManagementModule(2104):fdryFiV6Sx12ComboPortManagement2Module(2105):fdryFiV6Sx48PortGigCopperModule(2106):fdryFiV6SxXl0PortManagementModule(2112):fdryFiV6SxXl210gPortManagementModule(2113):fdryFcx624BaseModule(2208):fdryFcx648BaseModule(2209):fdryFcxSfpPlus4Port10gModule(2220):fdryIcx6610624BaseModule(2240):fdryIcx6610648BaseModule(2241):fdryIcx6610624PoeBaseModule(2244):fdryIcx6610648PoeBaseModule(2245):fdryIcx6610624FBaseModule(2246):fdryIcx6610DualMode8PortModule(2248):fdryIcx6610Qsfp10Port160gModule(2249):fdryIcx6430624BaseModule(2016):fdryIcx6430648BaseModule(2017):fdryIcx6430624PoeBaseModule(2020):fdryIcx6430648PoeBaseModule(2021):fdryIcx6430sfp4Port4gModule(2024):fdryIcx6430612CBaseModule(2058):fdryIcx6430Copper2Port2gModule(2059):fdryIcx6430sfp2Port2gModule(2060):fdryIcx6430612CBaseModule(2137):fdryIcx6430Copper2Port2gModule(2138):fdryIcx6430sfp2Port2gModule(2139):fdryIcx6450624BaseModule(2032):fdryIcx6450648BaseModule(2033):fdryIcx6450624PoeBaseModule(2036):fdryIcx6450648PoeBaseModule(2037):fdryIcx6450sfp4Port40gModule(2040):fdryIcx6450612CPDBaseModule(2140):fdryIcx6450Copper2Port2gModule(2141):fdryIcx6450sfp2Port2gModule(2142):fdryIcx665056BaseModule(2055):fdryIcx6650sfp4Port40gModule(2056):fdryIcx6650sfp8Port10gModule(2057):fdryIcx775048CBaseModule(2136):fdryIcx775048FBaseModule(2135):fdryIcx775026QBaseModule(2134):fdryIcx7750QSFP6port40gModule(2132):fdryIcx77506Q6port40gModule(2133):fdryIcx7450624BaseModule(2224):fdryIcx7450648BaseModule(2225):fdryIcx7450648FBaseModule(2227):fdryIcx7450624PoeBaseModule(2228):fdryIcx7450648PoeBaseModule(2229):fdryIcx7450632ZPBaseModule(2230):fdryIcx7400sfpplus4Port40gModule(2233):fdryIcx7400copper4Port40gModule(2234):fdryIcx7400sfp4Port4gModule(2235):fdryIcx7400qsfpplus1Port40gModule(2236):fdryIcx7250624BaseModule(2162):fdryIcx7250648BaseModule(2163):fdryIcx7250624GBaseModule(2160):fdryIcx7250624PoeBaseModule(2164):fdryIcx7250648PoeBaseModule(2165):fdryIcx7250sfpplus8Port80gModule(2169):fdryIcx7250sfpplus4Port4gModule(2168),The Configured Module Type. +.1.3.6.1.4.1.1991.1.1.2.8.1.1.2,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleType,INTEGER,read-write,,current,bi8PortGigManagementModule(0):bi4PortGigManagementModule(1):bi16PortCopperManagementModule(2):bi4PortGigModule(3):fi2PortGigManagementModule(4):fi4PortGigManagementModule(5):bi8PortGigCopperManagementModule(6):fi8PortGigManagementModule(7):bi8PortGigModule(8):bi12PortGigCopper2PortGigFiberManagement(9):bi24PortCopperModule(10):fi24PortCopperModule(11):bi16Port100FXModule(12):bi8Port100FXModule(13):bi8PortGigCopperModule(14):bi12PortGigCopper2PortGigFiber(15):bi2PortGigManagementModule(18):bi24Port100FXModule(19):bi0PortManagementModule(20):pos622MbsModule(21):pos155MbsModule(22):bi2PortGigModule(23):bi2PortGigCopperModule(24):fi2PortGigModule(25):fi4PortGigModule(26):fi8PortGigModule(27):fi8PortGigCopperModule(28):fi8PortGigCopperManagementModule(29):pos155Mbs2PModule(30):fi4PortGigCopperManagementModule(31):fi2PortGigCopperManagementModule(32):bi4PortGigCopperManagementModule(33):bi2PortGigCopperManagementModule(34):bi8PortGigM4ManagementModule(35):bi4PortGigM4ManagementModule(36):bi2PortGigM4ManagementModule(37):bi0PortGigM4ManagementModule(38):bi0PortWSMManagementModule(39):biPos2Port2488MbsModule(40):bi0PortWSMModule(41):niPos2Port2488MbsModule(42):ni4802(43):bi4PortGigNPAModule(44):biAtm2Port155MbsModule(45):biAtm4Port155MbsModule(46):bi1Port10GigModule(47):fes4802Module(48):fes2402Module(49):fes9604Module(50):fes12GigCopperAndGigFiberModule(51):fesx24GigModule(52):fesx24Gig2TenGigModule(53):fesx24Gig1TenGigModule(54):fesx48GigModule(55):fesx48Gig2TenGigModule(56):fesx48Gig1TenGigModule(57):bi40PortGigCopperHVModule(58):bi60PortGigCopperHVModule(59):bi8Port10GigModule(60):bi10PortGigHVModule(61):bi20PortGigHVModule(62):bi24PortGigModule(63):bi24PortGigCopperModule(64):bi48PortGigCopperModule(65):bi24PortGigFiberModule(66):ni4Port10GigSPModule(75):ni40PortGigSPModule(76):ni40PortGigCopperSPModule(77):ni2Port10GigSPModule(78):ni10PortGigSPModule(79):ni20PortGigSPModule(80):xmr4Port10GigSPModule(81):xmr20PortGigSPModule(82):xmr2Port10GigSPModule(83):xmr20PortGigCopperSPModule(84):xmr20PortGigFXSPModule(85):niImrMrManagementModule(86):niXmrMrManagementModule(87):xer4Port10GigSPModule(88):xer2Port10GigSPModule(89):xer20PortGigCopperSPModule(90):xer20PortGigFXSPModule(91):mlx4Port10GigSPModule(92):mlx2Port10GigSPModule(93):mlx20PortGigCopperSPModule(94):mlx20PortGigFXSPModule(95):mlx48PortGigMrj21SPModule(103):fesx24GigFiberGigCopperModule(112):fesx24GigFiber2TenGigModule(113):fesx24GigFiber1TenGigModule(114):fgs24PortManagementModule(144):fgs48PortManagementModule(145):fgsXfp2Port10gModule(152):fgsCx42Port10gModule(153):fgsXfp1Cx41Port10gModule(154):fgsXpf1Port10gModule(155):fls24PortCopperBaseModule(160):fls48PortCopperBaseModule(161):flsXfp1Port10gModule(168):flsCx41Port10gModule(169):fcx624SBaseModule(176):fcx648SBaseModule(177):fcx624SPoeBaseModule(180):fcx648SPoeBaseModule(181):fcxXfp2Port10gModule(184):fcxCx42Port16gModule(185):fcx624SFBaseModule(192):biFiJc48ePort100fxIpcModule(195):biFiJc48tPort100fxIpcModule(196):biFiJc8PortGigM4ManagementModule(197):biFiJc8PortGigIgcModule(198):biFiJc16PortGigIgcModule(200):biJc24PortCopperIpc4GigIgcModule(201):biJc16PortGigCopperIgcModule(202):biFiJc24Port100fxIpcModule(206):bi2Port10GigModule(207):biJc48tPortRJ21OmpModule(208):biJc48ePortRJ45OmpModule(209):biJc24PortIpcRJ45PoeModule(212):biJc2PortGigIgcM4ManagementModule(214):fdryBi4Port10GigModule(1048):fdryBi40PortGigModule(1049):fdryBi1Port100FXManagementModule(1050):fdryBi2Port10GigModule(1051):fdryBi40PortGigCopperModule(1052):fdryBi60PortGigCopperModule(1053):fdryBi4Port10GigHVModule(1054):fdryBi2Port10GigHVModule(1055):fdryBi8Port10GigHVModule(1056):fdryBi40PortGigHVModule(1057):fdryBi40PortGigCopperHVModule(1058):fdryBi60PortGigCopperHVModule(1059):fdryBi8Port10GigModule(1060):fdryBi10PortGigHVModule(1061):fdryBi20PortGigHVModule(1062):fdryBi24PortGigModule(1063):fdryBi24PortGigCopperModule(1064):fdryBi48PortGigCopperModule(1065):fdryBi24PortGigFiberModule(1066):fdryBi16Port10GigModule(1067):fdryNi4Port10GigSPModule(1075):fdryNi40PortGigSPModule(1076):fdryNi40PortGigCopperSPModule(1077):fdryNi2Port10GigSPModule(1078):fdryNi10PortGigSPModule(1079):fdryNi20PortGigSPModule(1080):fdryXmr4Port10GigSPModule(1081):fdryXmr20PortGigSPModule(1082):fdryXmr2Port10GigSPModule(1083):fdryXmr20PortGigCopperSPModule(1084):fdryXmr20PortGigFXSPModule(1085):fdryNiImrMrManagementModule(1086):fdryNiXmrMrManagementModule(1087):fdryMlx4Port10GigSPModule(1088):fdryMlx2Port10GigSPModule(1089):fdryMlx20PortGigCopperSPModule(1090):fdryMlx20PortGigFXSPModule(1091):niMlx8Port10GigSPModule(1092):niCes24PortFiberModule(1096):niCes24PortCopperModule(1097):niCes2Port10GigModule(1098):niCes48PortFiberModule(1099):niCes48PortCopperModule(1100):niCes48PortFiberWith2Port10GModule(1101):niCes48PortCopperWith2Port10GModule(1102):fdryMlx48PortGigMrj21SPModule(1103):fdryXmr2PortOC192SPModule(1104):fdryXmr1PortOC192SPModule(1105):fdryXmr8PortOC48SPModule(1106):fdryXmr4PortOC48SPModule(1107):fdryXmr2PortOC48SPModule(1108):fdryNiMlxMrManagementModule(1109):fdryIcx6610624BaseModule(2240):fdryIcx6610648BaseModule(2241):fdryIcx6610624PoeBaseModule(2244):fdryIcx6610648PoeBaseModule(2245):fdryIcx6610624FBaseModule(2246):fdryIcx6610DualMode8PortModule(2248):fdryIcx6610Qsfp10Port160gModule(2249):fdryIcx6430624BaseModule(2016):fdryIcx6430648BaseModule(2017):fdryIcx6430624PoeBaseModule(2020):fdryIcx6430648PoeBaseModule(2021):fdryIcx6430sfp4Port4gModule(2024):fdryIcx6430Copper2Port2gModule(2138):fdryIcx6430sfp2Port2gModule(2139):fdryIcx6450624BaseModule(2032):fdryIcx6450648BaseModule(2033):fdryIcx6450624PoeBaseModule(2036):fdryIcx6450648PoeBaseModule(2037):fdryIcx6450sfp4Port40gModule(2040):fdryIcx6450612CPDBaseModule(2140):fdryIcx6450Copper2Port2gModule(2141):fdryIcx6450sfp2Port2gModule(2142):fdryIcx665056BaseModule(2055):fdryIcx6650sfp4Port40gModule(2056):fdryIcx6650sfp8Port10gModule(2057):fdryIcx775048CBaseModule(2134):fdryIcx775048FBaseModule(2133):fdryIcx775026QBaseModule(2132):fdryIcx7750QSFP6port40gModule(2136):fdryIcx77506Q6port40gModule(2137):fdryIcx7450624BaseModule(2224):fdryIcx7450648BaseModule(2225):fdryIcx7450648FBaseModule(2227):fdryIcx7450624PoeBaseModule(2228):fdryIcx7450648PoeBaseModule(2229):fdryIcx7450632ZPBaseModule(2230):fdryIcx7400ServiceModule(2232):fdryIcx7400sfpplus4Port40gModule(2233):fdryIcx7400copper4Port40gModule(2234):fdryIcx7400sfp4Port4gModule(2235):fdryIcx7400qsfpplus1Port40gModule(2236):fdryIcx7250624BaseModule(2162):fdryIcx7250648BaseModule(2163):fdryIcx7250624GBaseModule(2160):fdryIcx7250624PoeBaseModule(2164):fdryIcx7250648PoeBaseModule(2165):fdryIcx7250sfpplus8Port80gModule(2169):fdryIcx7250sfpplus4Port4gModule(2168):fdryIcx7150624BaseModule(2064):fdryIcx7150648BaseModule(2065):fdryIcx7150648ZPBaseModule(2066):fdryIcx7150612CPoeBaseModule(2068):fdryIcx7150624PoeBaseModule(2069):fdryIcx7150648PoeBaseModule(2070):fdryIcx7150648PoeFBaseModule(2071):fdryIcx7150gc2Port2gModule(2072):fdryIcx7150sfpplus4Port40gModule(2073):fdryIcx7150sfpplus2Port20gModule(2074):fdryIcx7150sfpplus8Port80gModule(2075):fdryIcx7150C08PBaseModule(2176):fdryIcx7150C10ZPBaseModule(2177):fdryIcx7150624FBaseModule(2178):fdryIcx7150C08PTBaseModule(2179):fdryIcx7150sfp2Port2gModule(2184):fdryIcx7150gc2Port20gModule(2185):fdryIcx7650648FBaseModule(2144):fdryIcx7650648ZPBaseModule(2148):fdryIcx7650648PBaseModule(2149):fdryIcx76001Port100gModule(2152):fdryIcx76002Port80gModule(2153):fdryIcx76004Port40gModule(2154):fdryIcx76504Port160gModule(2155):fdryIcx76502Port200gModule(2156):fdryIcx76502Port80gModule(2157):fdryIcx7850632QBaseModule(2192):fdryIcx7850648FBaseModule(2193):fdryIcx7850648FSBaseModule(2194):fdryIcx7850648CBaseModule(2195):fdryIcx780012Port1200gModule(2200):fdryIcx78008Port800gModule(2201):fdryIcx7550624BaseModule(2208):fdryIcx7550648BaseModule(2209):fdryIcx7550624FBaseModule(2210):fdryIcx7550648FBaseModule(2211):fdryIcx7550624PBaseModule(2212):fdryIcx7550648PBaseModule(2213):fdryIcx7550624ZPBaseModule(2214):fdryIcx7550648ZPBaseModule(2215):fdryIcx75502Port200gModule(2216):fdryIcx75502Port80gModule(2217):fdryIcx755076004Port40gModule(2218):fdryIcx755076002Port80gModule(2219):fdryIcx755076001Port100gModule(2220):fdryIcx8200624BaseModule(2080):fdryIcx8200624PBaseModule(2081):fdryIcx8200648BaseModule(2082):fdryIcx8200648PBaseModule(2083):fdryIcx8200648PFBaseModule(2084):fdryIcx8200648PF2BaseModule(2085):fdryIcx8200624ZPBaseModule(2086):fdryIcx8200648ZP2BaseModule(2087):fdryIcx8200624FXBaseModule(2096):fdryIcx8200624FBaseModule(2097):fdryIcx8200648FBaseModule(2098):fdryIcx8200C08PBaseModule(2099):fdryIcx8200C08PTBaseModule(2100):fdryIcx8200C08PDCBaseModule(2101):fdryIcx8200C08PFBaseModule(2102):fdryIcx8200C08ZPBaseModule(2103):fdryIcx82004Port100gModule(2088):fdryIcx82008Port200gModule(2089):fdryIcx82002Port2gModule(2090):fdryIcx82002Port20gModule(2091):fdryIcx82002Port50gModule(2092):fdryIcx82002Port20gcfModule(2093),The Configured Module Type. .1.3.6.1.4.1.1991.1.1.2.8.1.1.3,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a configured module table entry. .1.3.6.1.4.1.1991.1.1.2.8.1.1.4,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleDescription,OCTET,read-only,,current,,A description of the configured module. .1.3.6.1.4.1.1991.1.1.2.8.1.1.5,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleOperStatus,OCTET,read-only,,current,,Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. .1.3.6.1.4.1.1991.1.1.2.8.1.1.6,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleSerialNumber,OCTET,read-only,,current,,Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. .1.3.6.1.4.1.1991.1.1.2.8.1.1.7,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleNumberOfPorts,Integer32,read-only,,current,,The number of ports of module. -.1.3.6.1.4.1.1991.1.1.2.8.1.1.8,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleMgmtModuleType,INTEGER,read-only,,current,other(1):nonManagementModule(2):unknownManagementModule(3):m1ManagementModule(4):m2ManagementModule(5):m3ManagementModule(6):m4ManagementModule(7):m5ManagementModule(8):jetcoreStackManagementModule(9):muchoManagementModule(10):rottWeilerManagementModule(11):fesXStackManagementModule(12):fgsStackManagementModule(13):niCesManagementModule(14):fastIronSuperXManagementModule(15):fastIronSXRManagementModule(16):fastIronV6SuperXManagementModule(17):fastIronV6SXRManagementModule(18),Management module type. +.1.3.6.1.4.1.1991.1.1.2.8.1.1.8,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleMgmtModuleType,INTEGER,read-only,,current,other(1):nonManagementModule(2):unknownManagementModule(3):m1ManagementModule(4):m2ManagementModule(5):m3ManagementModule(6):m4ManagementModule(7):m5ManagementModule(8):jetcoreStackManagementModule(9):muchoManagementModule(10):rottWeilerManagementModule(11):fesXStackManagementModule(12):fgsStackManagementModule(13):niCesManagementModule(14):fastIronSuperXManagementModule(15):fastIronSXRManagementModule(16):fastIronV6SuperXManagementModule(17):fastIronV6SXRManagementModule(18):icxStackManagementModule(19):icxManagementModule(20),Management module type. .1.3.6.1.4.1.1991.1.1.2.8.1.1.9,FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleNumberOfCpus,Integer32,read-only,,current,,The number of module CPUs. .1.3.6.1.4.1.1991.1.1.2.8.2,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Table,,not-accessible,,current,,A table of each configured stacking module information. .1.3.6.1.4.1.1991.1.1.2.8.2.1,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Entry,,not-accessible,snAgentConfigModule2Unit:snAgentConfigModule2Slot,current,,A row in the Agent Configured Stacking Module table. .1.3.6.1.4.1.1991.1.1.2.8.2.1.1,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Unit,Integer32,read-only,,current,,The index to the Agent Configured Module Table. .1.3.6.1.4.1.1991.1.1.2.8.2.1.2,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Slot,Integer32,read-only,,current,,The index to the Agent Configured Module Table. -.1.3.6.1.4.1.1991.1.1.2.8.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Type,INTEGER,read-write,,current,bi8PortGigManagementModule(0):bi4PortGigManagementModule(1):bi16PortCopperManagementModule(2):bi4PortGigModule(3):fi2PortGigManagementModule(4):fi4PortGigManagementModule(5):bi8PortGigCopperManagementModule(6):fi8PortGigManagementModule(7):bi8PortGigModule(8):bi12PortGigCopper2PortGigFiberManagement(9):bi24PortCopperModule(10):fi24PortCopperModule(11):bi16Port100FXModule(12):bi8Port100FXModule(13):bi8PortGigCopperModule(14):bi12PortGigCopper2PortGigFiber(15):bi2PortGigManagementModule(18):bi24Port100FXModule(19):bi0PortManagementModule(20):pos622MbsModule(21):pos155MbsModule(22):bi2PortGigModule(23):bi2PortGigCopperModule(24):fi2PortGigModule(25):fi4PortGigModule(26):fi8PortGigModule(27):fi8PortGigCopperModule(28):fi8PortGigCopperManagementModule(29):pos155Mbs2PModule(30):fi4PortGigCopperManagementModule(31):fi2PortGigCopperManagementModule(32):bi4PortGigCopperManagementModule(33):bi2PortGigCopperManagementModule(34):bi8PortGigM4ManagementModule(35):bi4PortGigM4ManagementModule(36):bi2PortGigM4ManagementModule(37):bi0PortGigM4ManagementModule(38):bi0PortWSMManagementModule(39):biPos2Port2488MbsModule(40):bi0PortWSMModule(41):niPos2Port2488MbsModule(42):ni4802(43):bi4PortGigNPAModule(44):biAtm2Port155MbsModule(45):biAtm4Port155MbsModule(46):bi1Port10GigModule(47):fes4802Module(48):fes2402Module(49):fes9604Module(50):fes12GigCopperAndGigFiberModule(51):fesx24GigModule(52):fesx24Gig2TenGigModule(53):fesx24Gig1TenGigModule(54):fesx48GigModule(55):fesx48Gig2TenGigModule(56):fesx48Gig1TenGigModule(57):superx12ComboPortManagementModule(64):superx2PortTenGigModule(65):superx24PortGigCopperModule(66):superx24PortGigFiberModule(67):superx2PortTenGigLanWanModule(68):superx24Port100tx1PortGigFiberModule(69):superx12ComboPortManagement2Module(74):superxR2PortTenGigManagementModule(80):superxRManagementModule(81):fesx24GigFiberGigCopperModule(112):fesx24GigFiber2TenGigModule(113):fesx24GigFiber1TenGigModule(114):fgs24PortManagementModule(144):fgs48PortManagementModule(145):fgsXfp2Port10gModule(152):fgsCx42Port10gModule(153):fgsXfp1Cx41Port10gModule(154):fgsXpf1Port10gModule(155):fls24PortCopperBaseModule(160):fls48PortCopperBaseModule(161):flsXfp1Port10gModule(168):flsCx41Port10gModule(169):fcx624SBaseModule(176):fcx648SBaseModule(177):fcx624SPoeBaseModule(180):fcx648SPoeBaseModule(181):fcxXfp2Port10gModule(184):fcxCx42Port16gModule(185):fcx624SFBaseModule(192):biFiJc48ePort100fxIpcModule(195):biFiJc48tPort100fxIpcModule(196):biFiJc8PortGigM4ManagementModule(197):biFiJc8PortGigIgcModule(198):biFiJc16PortGigIgcModule(200):biJc24PortCopperIpc4GigIgcModule(201):biJc16PortGigCopperIgcModule(202):biFiJc24Port100fxIpcModule(206):bi2Port10GigModule(207):biJc48tPortRJ21OmpModule(208):biJc48ePortRJ45OmpModule(209):biJc24PortIpcRJ45PoeModule(212):biJc2PortGigIgcM4ManagementModule(214):fdryFcx624BaseModule(2208):fdryFcx648BaseModule(2209):fdryFcxSfpPlus4Port10gModule(2220):fdryIcx6610624BaseModule(2240):fdryIcx6610648BaseModule(2241):fdryIcx6610624PoeBaseModule(2244):fdryIcx6610648PoeBaseModule(2245):fdryIcx6610624FBaseModule(2246):fdryIcx6610DualMode8PortModule(2248):fdryIcx6610Qsfp10Port160gModule(2249):fdryIcx6430624BaseModule(2016):fdryIcx6430648BaseModule(2017):fdryIcx6430624PoeBaseModule(2020):fdryIcx6430648PoeBaseModule(2021):fdryIcx6430sfp4Port4gModule(2024):fdryIcx6430612CBaseModule(2058):fdryIcx6430Copper2Port2gModule(2059):fdryIcx6430sfp2Port2gModule(2060):fdryIcx6430612CBaseModule(2137):fdryIcx6430Copper2Port2gModule(2138):fdryIcx6430sfp2Port2gModule(2139):fdryIcx6450624BaseModule(2032):fdryIcx6450648BaseModule(2033):fdryIcx6450624PoeBaseModule(2036):fdryIcx6450648PoeBaseModule(2037):fdryIcx6450sfp4Port40gModule(2040):fdryIcx6450612CPDBaseModule(2140):fdryIcx6450Copper2Port2gModule(2141):fdryIcx6450sfp2Port2gModule(2142):fdryIcx665056BaseModule(2055):fdryIcx6650sfp4Port40gModule(2056):fdryIcx6650sfp8Port10gModule(2057):fdryIcx775048CBaseModule(2136):fdryIcx775048FBaseModule(2135):fdryIcx775026QBaseModule(2134):fdryIcx7750QSFP6port40gModule(2132):fdryIcx77506Q6port40gModule(2133):fdryIcx7450624BaseModule(2224):fdryIcx7450648BaseModule(2225):fdryIcx7450648FBaseModule(2227):fdryIcx7450624PoeBaseModule(2228):fdryIcx7450648PoeBaseModule(2229):fdryIcx7450632ZPBaseModule(2230):fdryIcx7400sfpplus4Port40gModule(2233):fdryIcx7400copper4Port40gModule(2234):fdryIcx7400sfp4Port4gModule(2235):fdryIcx7400qsfpplus1Port40gModule(2236):fdryIcx7250624BaseModule(2162):fdryIcx7250648BaseModule(2163):fdryIcx7250624GBaseModule(2160):fdryIcx7250624PoeBaseModule(2164):fdryIcx7250648PoeBaseModule(2165):fdryIcx7250sfpplus8Port80gModule(2169):fdryIcx7250sfpplus4Port4gModule(2168),The Configured Module Type. +.1.3.6.1.4.1.1991.1.1.2.8.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Type,INTEGER,read-write,,current,fgs24PortManagementModule(144):fgs48PortManagementModule(145):fgsXfp2Port10gModule(152):fgsCx42Port10gModule(153):fgsXfp1Cx41Port10gModule(154):fgsXpf1Port10gModule(155):fls24PortCopperBaseModule(160):fls48PortCopperBaseModule(161):flsXfp1Port10gModule(168):flsCx41Port10gModule(169):fcx624SBaseModule(176):fcx648SBaseModule(177):fcx624SPoeBaseModule(180):fcx648SPoeBaseModule(181):fcxXfp2Port10gModule(184):fcxCx42Port16gModule(185):fcx624SFBaseModule(192):fdryIcx6610624BaseModule(2240):fdryIcx6610648BaseModule(2241):fdryIcx6610624PoeBaseModule(2244):fdryIcx6610648PoeBaseModule(2245):fdryIcx6610624FBaseModule(2246):fdryIcx6610DualMode8PortModule(2248):fdryIcx6610Qsfp10Port160gModule(2249):fdryIcx6430624BaseModule(2016):fdryIcx6430648BaseModule(2017):fdryIcx6430624PoeBaseModule(2020):fdryIcx6430648PoeBaseModule(2021):fdryIcx6430sfp4Port4gModule(2024):fdryIcx6430Copper2Port2gModule(2138):fdryIcx6430sfp2Port2gModule(2139):fdryIcx6450624BaseModule(2032):fdryIcx6450648BaseModule(2033):fdryIcx6450624PoeBaseModule(2036):fdryIcx6450648PoeBaseModule(2037):fdryIcx6450sfp4Port40gModule(2040):fdryIcx6450612CPDBaseModule(2140):fdryIcx6450Copper2Port2gModule(2141):fdryIcx6450sfp2Port2gModule(2142):fdryIcx665056BaseModule(2055):fdryIcx6650sfp4Port40gModule(2056):fdryIcx6650sfp8Port10gModule(2057):fdryIcx775048CBaseModule(2134):fdryIcx775048FBaseModule(2133):fdryIcx775026QBaseModule(2132):fdryIcx7750QSFP6port40gModule(2136):fdryIcx77506Q6port40gModule(2137):fdryIcx7450624BaseModule(2224):fdryIcx7450648BaseModule(2225):fdryIcx7450648FBaseModule(2227):fdryIcx7450624PoeBaseModule(2228):fdryIcx7450648PoeBaseModule(2229):fdryIcx7450632ZPBaseModule(2230):fdryIcx7400ServiceModule(2232):fdryIcx7400sfpplus4Port40gModule(2233):fdryIcx7400copper4Port40gModule(2234):fdryIcx7400sfp4Port4gModule(2235):fdryIcx7400qsfpplus1Port40gModule(2236):fdryIcx7250624BaseModule(2162):fdryIcx7250648BaseModule(2163):fdryIcx7250624GBaseModule(2160):fdryIcx7250624PoeBaseModule(2164):fdryIcx7250648PoeBaseModule(2165):fdryIcx7250sfpplus8Port80gModule(2169):fdryIcx7250sfpplus4Port4gModule(2168):fdryIcx7150624BaseModule(2064):fdryIcx7150648BaseModule(2065):fdryIcx7150648ZPBaseModule(2066):fdryIcx7150612CPoeBaseModule(2068):fdryIcx7150624PoeBaseModule(2069):fdryIcx7150648PoeBaseModule(2070):fdryIcx7150648PoeFBaseModule(2071):fdryIcx7150gc2Port2gModule(2072):fdryIcx7150sfpplus4Port40gModule(2073):fdryIcx7150sfpplus2Port20gModule(2074):fdryIcx7150sfpplus8Port80gModule(2075):fdryIcx7150C08PBaseModule(2176):fdryIcx7150C10ZPBaseModule(2177):fdryIcx7150624FBaseModule(2178):fdryIcx7150C08PTBaseModule(2179):fdryIcx7150sfp2Port2gModule(2184):fdryIcx7150gc2Port20gModule(2185):fdryIcx7650648FBaseModule(2144):fdryIcx7650648ZPBaseModule(2148):fdryIcx7650648PBaseModule(2149):fdryIcx76001Port100gModule(2152):fdryIcx76002Port80gModule(2153):fdryIcx76004Port40gModule(2154):fdryIcx76504Port160gModule(2155):fdryIcx76502Port200gModule(2156):fdryIcx76502Port80gModule(2157):fdryIcx7850632QBaseModule(2192):fdryIcx7850648FBaseModule(2193):fdryIcx7850648FSBaseModule(2194):fdryIcx7850648CBaseModule(2195):fdryIcx780012Port1200gModule(2200):fdryIcx78008Port800gModule(2201):fdryIcx7550624BaseModule(2208):fdryIcx7550648BaseModule(2209):fdryIcx7550624FBaseModule(2210):fdryIcx7550648FBaseModule(2211):fdryIcx7550624PBaseModule(2212):fdryIcx7550648PBaseModule(2213):fdryIcx7550624ZPBaseModule(2214):fdryIcx7550648ZPBaseModule(2215):fdryIcx75502Port200gModule(2216):fdryIcx75502Port80gModule(2217):fdryIcx755076004Port40gModule(2218):fdryIcx755076002Port80gModule(2219):fdryIcx755076001Port100gModule(2220):fdryIcx8200624BaseModule(2080):fdryIcx8200624PBaseModule(2081):fdryIcx8200648BaseModule(2082):fdryIcx8200648PBaseModule(2083):fdryIcx8200648PFBaseModule(2084):fdryIcx8200648PF2BaseModule(2085):fdryIcx8200624ZPBaseModule(2086):fdryIcx8200648ZP2BaseModule(2087):fdryIcx8200624FXBaseModule(2096):fdryIcx8200624FBaseModule(2097):fdryIcx8200648FBaseModule(2098):fdryIcx8200C08PBaseModule(2099):fdryIcx8200C08PTBaseModule(2100):fdryIcx8200C08PDCBaseModule(2101):fdryIcx8200C08PFBaseModule(2102):fdryIcx8200C08ZPBaseModule(2103):fdryIcx82004Port100gModule(2088):fdryIcx82008Port200gModule(2089):fdryIcx82002Port2gModule(2090):fdryIcx82002Port20gModule(2091):fdryIcx82002Port50gModule(2092):fdryIcx82002Port20gcfModule(2093),The Configured Module Type. .1.3.6.1.4.1.1991.1.1.2.8.2.1.4,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2RowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a configured module table entry. .1.3.6.1.4.1.1991.1.1.2.8.2.1.5,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Description,OCTET,read-only,,current,,A description of the configured module. .1.3.6.1.4.1.1991.1.1.2.8.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2OperStatus,OCTET,read-only,,current,,Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. .1.3.6.1.4.1.1991.1.1.2.8.2.1.7,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2SerialNumber,OCTET,read-only,,current,,Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. .1.3.6.1.4.1.1991.1.1.2.8.2.1.8,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2NumberOfPorts,Integer32,read-only,,current,,The number of ports of module. -.1.3.6.1.4.1.1991.1.1.2.8.2.1.9,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2MgmtModuleType,INTEGER,read-only,,current,other(1):nonManagementModule(2):unknownManagementModule(3):m1ManagementModule(4):m2ManagementModule(5):m3ManagementModule(6):m4ManagementModule(7):m5ManagementModule(8):jetcoreStackManagementModule(9):muchoManagementModule(10):rottWeilerManagementModule(11):fesXStackManagementModule(12):fgsStackManagementModule(13),Management module type. +.1.3.6.1.4.1.1991.1.1.2.8.2.1.9,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2MgmtModuleType,INTEGER,read-only,,current,other(1):nonManagementModule(2):unknownManagementModule(3):m1ManagementModule(4):m2ManagementModule(5):m3ManagementModule(6):m4ManagementModule(7):m5ManagementModule(8):jetcoreStackManagementModule(9):muchoManagementModule(10):rottWeilerManagementModule(11):fesXStackManagementModule(12):fgsStackManagementModule(13):icxStackManagementModule(19):icxManagementModule(20),Management module type. .1.3.6.1.4.1.1991.1.1.2.8.2.1.10,FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2NumberOfCpus,Integer32,read-only,,current,,The number of module CPUs. .1.3.6.1.4.1.1991.1.1.2.9,FOUNDRY-SN-AGENT-MIB::snAgentUser,,,,,, .1.3.6.1.4.1.1991.1.1.2.9.1,FOUNDRY-SN-AGENT-MIB::snAgentUserGbl,,,,,, @@ -3365,15 +3358,14 @@ .1.3.6.1.4.1.1991.1.1.2.11.1.1.4,FOUNDRY-SN-AGENT-MIB::snAgentCpuUtilValue,Gauge32,read-only,,deprecated,,The statistical CPU utilization in units of one-hundredth of a percent. This value is deprecated. Users are recommended to use snAgentCpuUtilPercent or snAgentCpuUtil100thPercent instead. .1.3.6.1.4.1.1991.1.1.2.11.1.1.5,FOUNDRY-SN-AGENT-MIB::snAgentCpuUtilPercent,Gauge32,read-only,,current,,The statistical CPU utilization in units of a percent. .1.3.6.1.4.1.1991.1.1.2.11.1.1.6,FOUNDRY-SN-AGENT-MIB::snAgentCpuUtil100thPercent,Gauge32,read-only,,current,,The statistical CPU utilization in units of one-hundredth of a percent. -.1.3.6.1.4.1.1991.1.1.2.11.2,FOUNDRY-SN-AGENT-MIB::snCpuProcessTable,,not-accessible,,current,,Table to list utilization and runtime for all CPU processes in the device. For NetIron Devices snAgentCpuProcessEnable object needs to be enabled. +.1.3.6.1.4.1.1991.1.1.2.11.2,FOUNDRY-SN-AGENT-MIB::snCpuProcessTable,,not-accessible,,current,,Table to list utilization and runtime for all CPU processes in the device. .1.3.6.1.4.1.1991.1.1.2.11.2.1,FOUNDRY-SN-AGENT-MIB::snCpuProcessEntry,,not-accessible,snCpuProcessName,current,,A row in the CPU process table. .1.3.6.1.4.1.1991.1.1.2.11.2.1.1,FOUNDRY-SN-AGENT-MIB::snCpuProcessName,OCTET,read-only,,current,,The process name. -.1.3.6.1.4.1.1991.1.1.2.11.2.1.2,FOUNDRY-SN-AGENT-MIB::snCpuProcess5SecUtil,Gauge32,read-only,,current,,The statistics collection of last 5 second process utilization. It is a 100th percentile value (100*n). It can have a value 0 or a value between 100 to 10000 in multiples of 100. If the agent is queried immediately after turning on the CPU usage and 5 seconds have not elapsed then the data will not be available. Therefore we will be returning the data for the actual elapsed time for NetIron devices. -.1.3.6.1.4.1.1991.1.1.2.11.2.1.3,FOUNDRY-SN-AGENT-MIB::snCpuProcess1MinUtil,Gauge32,read-only,,current,,The statistics collection of last 5 second process utilization. It is a 100th percentile value (100*n). It can have a value 0 or a value between 100 to 10000 in multiples of 100. If the agent is queried immediately after turning on the CPU usage and 1 minute has not elapsed then the data will not be available. Therefore we will be returning the data for the actual elapsed time for NetIron devices. -.1.3.6.1.4.1.1991.1.1.2.11.2.1.4,FOUNDRY-SN-AGENT-MIB::snCpuProcess5MinUtil,Gauge32,read-only,,current,,The statistics collection of last 5 second process utilization. It is a 100th percentile value (100*n). It can have a value 0 or a value between 100 to 10000 in multiples of 100. If the agent is queried immediately after turning on the CPU usage and 5 minutess have not elapsed then the data will not be available. Therefore we will be returning the data for the actual elapsed time for NetIron devices. -.1.3.6.1.4.1.1991.1.1.2.11.2.1.5,FOUNDRY-SN-AGENT-MIB::snCpuProcess15MinUtil,Gauge32,read-only,,current,,The statistics collection of last 5 second process utilization. It is a 100th percentile value (100*n). It can have a value 0 or a value between 100 to 10000 in multiples of 100. This object is not supported and has been excluded from agent for NetIron devices +.1.3.6.1.4.1.1991.1.1.2.11.2.1.2,FOUNDRY-SN-AGENT-MIB::snCpuProcess5SecUtil,Gauge32,read-only,,current,,The statistics collection of last 5 second process utilization. +.1.3.6.1.4.1.1991.1.1.2.11.2.1.3,FOUNDRY-SN-AGENT-MIB::snCpuProcess1MinUtil,Gauge32,read-only,,current,,The statistics collection of last 1 minute process utilization. +.1.3.6.1.4.1.1991.1.1.2.11.2.1.4,FOUNDRY-SN-AGENT-MIB::snCpuProcess5MinUtil,Gauge32,read-only,,current,,The statistics collection of last 5 minute process utilization. +.1.3.6.1.4.1.1991.1.1.2.11.2.1.5,FOUNDRY-SN-AGENT-MIB::snCpuProcess15MinUtil,Gauge32,read-only,,current,,The statistics collection of last 15 minute process utilization. .1.3.6.1.4.1.1991.1.1.2.11.2.1.6,FOUNDRY-SN-AGENT-MIB::snCpuProcessRuntime,Counter32,read-only,,current,,Process runtime in milliseconds. -.1.3.6.1.4.1.1991.1.1.2.11.3,FOUNDRY-SN-AGENT-MIB::snAgentCpuProcessEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Enables the CPU utilization statistics collection. .1.3.6.1.4.1.1991.1.1.2.12,FOUNDRY-SN-AGENT-MIB::snAgentHw,,,,,, .1.3.6.1.4.1.1991.1.1.2.12.1,FOUNDRY-SN-AGENT-MIB::snAgentHwICBMCounterTable,,not-accessible,,current,,Table to list the ICBM counter values. This table is not supported on 10G module. .1.3.6.1.4.1.1991.1.1.2.12.1.1,FOUNDRY-SN-AGENT-MIB::snAgentHwICBMCounterEntry,,not-accessible,snAgentHwICBMCounterSlot:snAgentHwICBMCounterDMA,current,,A row representing ICBM counter values for that slot. @@ -3454,10 +3446,17 @@ .1.3.6.1.4.1.1991.1.1.2.13.3.1,FOUNDRY-SN-AGENT-MIB::snAgentTemp2Entry,,not-accessible,snAgentTemp2UnitNum:snAgentTemp2SlotNum:snAgentTemp2SensorId,current,,A row in the module temperature table. .1.3.6.1.4.1.1991.1.1.2.13.3.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTemp2UnitNum,Integer32,not-accessible,,current,,The unit number of module which contains the temperature sensor represented by this row. .1.3.6.1.4.1.1991.1.1.2.13.3.1.2,FOUNDRY-SN-AGENT-MIB::snAgentTemp2SlotNum,Integer32,not-accessible,,current,,The slot number of module which contains the temperature sensor represented by this row. -.1.3.6.1.4.1.1991.1.1.2.13.3.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTemp2SensorId,Integer32,not-accessible,,current,,The temperature sensor identifier of Slave module whose temperature is represented by this row, for FastIron management module: sensor#1 - Intake Side Temperature sensor# 2 - Exhaust Side Temperature. +.1.3.6.1.4.1.1991.1.1.2.13.3.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTemp2SensorId,Integer32,not-accessible,,current,,The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature sensor# 2 - Exhaust Side Temperature. .1.3.6.1.4.1.1991.1.1.2.13.3.1.4,FOUNDRY-SN-AGENT-MIB::snAgentTemp2SensorDescr,OCTET,read-only,,current,,Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature sensor table. The description provides the meaning and purpose of this senor. .1.3.6.1.4.1.1991.1.1.2.13.3.1.5,FOUNDRY-SN-AGENT-MIB::snAgentTemp2Value,INTEGER,read-only,,current,,Temperature of the sensor represented by this row. Each unit is 0.5 degrees Celsius. -.1.3.6.1.4.1.1991.1.1.2.14,FOUNDRY-SN-AGENT-MIB::snAgentPoe,,,,,, +.1.3.6.1.4.1.1991.1.1.2.13.4,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2Table,,not-accessible,,current,,Table to list temperature threshold levels for 3 speeds of fan settings, threshold and warning temperature . Depending on the temperature level, the fans run at diffrent speeds of RPM. There are 3 levels of temperature settings for 3 fan speeds (low, high, shutdown). This table is applicable to only those modules with temperature sensors. For each row, there are 3 temperature threshold values. The high value, if reached causes the fan to run at next high level speed and when it reduces the below the low value, the fan runs at next low speed. +.1.3.6.1.4.1.1991.1.1.2.13.4.1,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2Entry,,not-accessible,snAgentTempThreshold2UnitNum:snAgentTempThreshold2Rule,current,,A row in the module temperature threshold table. +.1.3.6.1.4.1.1991.1.1.2.13.4.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2UnitNum,INTEGER,not-accessible,,current,,The unit number in the system for which threshold levels represented by this row are applicable. +.1.3.6.1.4.1.1991.1.1.2.13.4.1.2,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2Rule,INTEGER,not-accessible,,current,,The Rule number in the system for which threshold levels represented by this row are applicable. +.1.3.6.1.4.1.1991.1.1.2.13.4.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2LowValue,INTEGER,read-only,,current,,The low value for the temperature threshold, below which the fans would need to operate at the next lower speed. Each unit is degrees Celcius. This value is not applicable for the 'low' level, as there is no more lower speeds than that. +.1.3.6.1.4.1.1991.1.1.2.13.4.1.4,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2HighValue,INTEGER,read-only,,current,,The high value for the temperature threshold, above which the fans would need to operate at the next higher speed. If it reaches more than the high threshold value for 'high' level, the module will be shutdown. Each unit is degrees Celcius. +.1.3.6.1.4.1.1991.1.1.2.13.4.1.5,FOUNDRY-SN-AGENT-MIB::snAgentTempThreshold2ShutdownValue,INTEGER,read-only,,current,,Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management module, it returns no-such-name. +.1.3.6.1.4.1.1991.1.1.2.14,FDRY-POE-MIB::snAgentPoe,,,,,,The Ruckus Wireless proprietary MIB module for Power Over Ethernet(PoE) It has PoE port and module configuring information. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.2.14.1,FDRY-POE-MIB::snAgentPoeGbl,,,,,, .1.3.6.1.4.1.1991.1.1.2.14.1.1,FDRY-POE-MIB::snAgentPoeGblPowerCapacityTotal,Unsigned32,read-only,,current,,This object shows the total inline power capacity available in the device, measured in mWatts. .1.3.6.1.4.1.1991.1.1.2.14.1.2,FDRY-POE-MIB::snAgentPoeGblPowerCapacityFree,Unsigned32,read-only,,current,,This object shows the inline power capacity currently available in the device which is unallocated, measured in mWatts. @@ -3467,152 +3466,131 @@ .1.3.6.1.4.1.1991.1.1.2.14.2.2.1,FDRY-POE-MIB::snAgentPoePortEntry,,not-accessible,snAgentPoePortNumber,current,,A row in the POE port table. .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.1,FDRY-POE-MIB::snAgentPoePortNumber,Integer32,read-only,,current,,The port number in ifIndex value. .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.2,FDRY-POE-MIB::snAgentPoePortControl,INTEGER,read-create,,current,other(1):disable(2):enable(3):enableLegacyDevice(4),Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'. -.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.3,FDRY-POE-MIB::snAgentPoePortWattage,Integer32,read-create,,current,,Adjust the inline power wattage. Valid value between 1000 to 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is milliwatts. This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. -.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.4,FDRY-POE-MIB::snAgentPoePortClass,Integer32,read-create,,current,,Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.3,FDRY-POE-MIB::snAgentPoePortWattage,Integer32,read-create,,current,,Adjust the inline power wattage. Valid value between 1000 to 15400(IEEE802_3AF)/30000(IEEE802_3AT)/120000(IEEE802_3BT). Each unit is milliwatts. This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.4,FDRY-POE-MIB::snAgentPoePortClass,Integer32,read-create,,current,,Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability or is not configured by the user, reading this object returns undefined value (0). .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.5,FDRY-POE-MIB::snAgentPoePortPriority,INTEGER,read-create,,current,invalid(0):critical(1):high(2):low(3):medium(4):other(5),Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other. .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.6,FDRY-POE-MIB::snAgentPoePortConsumed,Integer32,read-only,,current,,Inline power consumed by the port. Each unit is milliwatts. -.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.7,FDRY-POE-MIB::snAgentPoePortType,OCTET,read-only,,current,,Inline Power device type 802.3af, 802.3at or Legacy device. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.7,FDRY-POE-MIB::snAgentPoePortType,OCTET,read-only,,current,,Inline Power device type 802.3af, 802.3at, 802.3bt or Legacy device. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.8,FDRY-POE-MIB::snAgentPoePortPDClass,Integer32,read-only,,current,,This is a PD signature which the decive learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. And if PD is powered without user power Spec, then PoE port power limit will be set based on pd-detected class. The value is PDClassA in case of dual signature (IEEE 802.3bt module) PD. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.9,FDRY-POE-MIB::snAgentPoePortPDClassB,Integer32,read-only,,current,,This is second PD class signature of dual signature PD which the device learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. And if PD is powered without user power Spec, then PoE port power limit will be set based on both pd-detected classes. The value PDClassB is valid for dual signature PD (IEEE 802.3bt module) having PDClassA and PDClassB. If the PD is not dual signature the value is 0. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.10,FDRY-POE-MIB::snAgentPoePortlldpReqPwr,Integer32,read-only,,current,,Maximum power requested by PD through LLDP in milliwatts. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.11,FDRY-POE-MIB::snAgentPoePortlldpReqPwrA,Integer32,read-only,,deprecated,,Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrA is power in milliwatts for channel A. This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.12,FDRY-POE-MIB::snAgentPoePortlldpReqPwrB,Integer32,read-only,,deprecated,,Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrB is power in milliwatts for channel B. This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.13,FDRY-POE-MIB::snAgentPoePortCapability,INTEGER,read-only,,current,others(0):twoPairPse(1):fourPairPse(2),Capability of port, 0-others, 1-2pair, 2-4pair. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.14,FDRY-POE-MIB::snAgentPoePortMax2PairPwr,Integer32,read-only,,current,,Maximum power supported by 2pair port in milliwatts. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.15,FDRY-POE-MIB::snAgentPoePortMax4PairPwr,Integer32,read-only,,current,,Maximum power supported by 4pair port in milliwatts. +.1.3.6.1.4.1.1991.1.1.2.14.2.2.1.16,FDRY-POE-MIB::snAgentPoePortMode,INTEGER,read-only,,current,none(0):overdrive(1),Poe port overdrive mode. .1.3.6.1.4.1.1991.1.1.2.14.3,FDRY-POE-MIB::snAgentPoeModule,,,,,, .1.3.6.1.4.1.1991.1.1.2.14.3.1,FDRY-POE-MIB::snAgentPoeModuleTable,,not-accessible,,current,,A table of POE Module configuration. .1.3.6.1.4.1.1991.1.1.2.14.3.1.1,FDRY-POE-MIB::snAgentPoeModuleEntry,,not-accessible,snAgentPoeModuleNumber,current,,A row in the POE Module table. .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.1,FDRY-POE-MIB::snAgentPoeModuleNumber,Unsigned32,read-only,,current,,This objects talks about POE module number. .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.2,FDRY-POE-MIB::snAgentPoeModuleBudget,Unsigned32,read-create,,current,,This objects talks about module power budget in watts. -.1.3.6.1.4.1.1991.1.1.2.14.3.1.1.3,FDRY-POE-MIB::snAgentPoeModuleMaxPDTypeSupport,INTEGER,read-only,,current,ieee802dot3af(0):ieee802dot3at(1),This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also support ieee802.3af but reverse is not true. +.1.3.6.1.4.1.1991.1.1.2.14.3.1.1.3,FDRY-POE-MIB::snAgentPoeModuleMaxPDTypeSupport,INTEGER,read-only,,current,ieee802dot3af(0):ieee802dot3at(1),This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also support ieee802.3af but reverse is not true. .1.3.6.1.4.1.1991.1.1.2.14.4,FDRY-POE-MIB::snAgentPoeUnit,,,,,, -.1.3.6.1.4.1.1991.1.1.2.14.4.1,FDRY-POE-MIB::snAgentPoeUnitTable,,not-accessible,,current,,A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row +.1.3.6.1.4.1.1991.1.1.2.14.4.1,FDRY-POE-MIB::snAgentPoeUnitTable,,not-accessible,,current,,A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row .1.3.6.1.4.1.1991.1.1.2.14.4.1.1,FDRY-POE-MIB::snAgentPoeUnitEntry,,not-accessible,snAgentPoeUnitIndex,current,,A row in the POE Unit table. .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.1,FDRY-POE-MIB::snAgentPoeUnitIndex,Unsigned32,read-only,,current,,The Index to POE unit Table. .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.2,FDRY-POE-MIB::snAgentPoeUnitPowerCapacityTotal,Unsigned32,read-only,,current,,This object shows the total inline power capacity available on that unit (device), measured in mWatts. -.1.3.6.1.4.1.1991.1.1.2.14.4.1.1.3,FDRY-POE-MIB::snAgentPoeUnitPowerCapacityFree,Unsigned32,read-only,,current,,This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts. +.1.3.6.1.4.1.1991.1.1.2.14.4.1.1.3,FDRY-POE-MIB::snAgentPoeUnitPowerCapacityFree,Unsigned32,read-only,,current,,This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts. In case of Static allocation total free power and in case of Dynamic allocation total unconsumed power is disaplyed .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.4,FDRY-POE-MIB::snAgentPoeUnitPowerAllocationsRequestsHonored,Unsigned32,read-only,,current,,This object shows number of times the inline power allocations requests honored on that unit (device). +.1.3.6.1.4.1.1991.1.1.2.14.4.1.1.5,FDRY-POE-MIB::snAgentPoePwrAllocationType,INTEGER,read-only,,current,none(0):static(1):dynamic(2),This object shows the power allocation type, based on which the total free capacity is displayed. Static(1) or Dynamic(2) power allocation. .1.3.6.1.4.1.1991.1.1.2.15,FOUNDRY-SN-AGENT-MIB::snAgentLicense,,,,,, -.1.3.6.1.4.1.1991.1.1.2.15.1,FOUNDRY-SN-AGENT-MIB::fdryLicenseTable,,not-accessible,,current,,A list of licenses maintained by license sub-system. -.1.3.6.1.4.1.1991.1.1.2.15.1.1,FOUNDRY-SN-AGENT-MIB::fdryLicenseEntry,,not-accessible,fdryLicensePackageName:fdryLicenseLid:IMPLIEDfdryLicenseHash,current,,An entry in a license table. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.1,FOUNDRY-SN-AGENT-MIB::fdryLicensePackageName,OCTET,not-accessible,,current,,Name of the package, whose license information, this entry displays. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.2,FOUNDRY-SN-AGENT-MIB::fdryLicenseLid,OCTET,not-accessible,,current,,For FastIron: License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID is set as 2.0. This entry displays license information. For NetIron: License Id (LID) of the chassis or the line module for which, this entry displays license information. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.3,FOUNDRY-SN-AGENT-MIB::fdryLicenseHash,OCTET,not-accessible,,current,,A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.4,FOUNDRY-SN-AGENT-MIB::fdryLicenseType,INTEGER,read-only,,current,normal(1):trial(2),The type of the license, which can be either normal or trial. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.5,FOUNDRY-SN-AGENT-MIB::fdryLicensePrecedence,Unsigned32,read-only,,current,,Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, when there are many trial and normal licenses with same package name and LID. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.6,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialDays,Unsigned32,read-only,,current,,The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.7,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialTimeElapsed,Unsigned32,read-only,,current,,The number of trial hours for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.8,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialTimeLeft,Unsigned32,read-only,,current,,The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours used. For a normal license, this is 0. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.9,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialState,INTEGER,read-only,,current,invalid(1):unused(2):active(3):expired(4):duplicated(5),This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is never used, avtive means it has been used at least once and expired means it has expired and can't be used any more. Duplicated means the license has same package name with other license and but both serial numbers are different in the same device, this is only for the non-node locked license. Value duplicated(5) is supported only on FastIron. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.10,FOUNDRY-SN-AGENT-MIB::fdryLicenseVendorInfo,OCTET,read-only,,current,,This is the Brocade specific package data which is an octet string. This contains encoded information of license specific information such as package bit mask, number of ports, etc. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.11,FOUNDRY-SN-AGENT-MIB::fdryLicenseSlot,Integer32,read-only,,current,,This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID and can be present only in one slot. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.12,FOUNDRY-SN-AGENT-MIB::fdryLicenseMode,INTEGER,read-only,,current,nodeLocked(1):nonNodeLocked(2),The mode of the license, which can be either node locked or non-node locked mode. This objects is supported only on FastIron. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.13,FOUNDRY-SN-AGENT-MIB::fdryLicenseSerialNumber,OCTET,read-only,,current,,This is the serial number of the license. This is only for the non-node locked license. This objects is supported only on FastIron. -.1.3.6.1.4.1.1991.1.1.2.15.1.1.14,FOUNDRY-SN-AGENT-MIB::fdryLicenseCapacity,Integer32,read-only,,current,,The capacity of the license. For POD license, this is the number of ports. For premium or advance license, it is 1. This objects is supported only on FastIron. -.1.3.6.1.4.1.1991.1.1.2.15.2,FOUNDRY-SN-AGENT-MIB::fdryLicensedFeatureInfo,BITS,read-only,,current,ospf(0):isis(1):bgp(2):mpls(3),The features or packages enabled/licensed on the system. +.1.3.6.1.4.1.1991.1.1.2.15.1,FOUNDRY-SN-AGENT-MIB::fdryLicenseTable,,not-accessible,,deprecated,,A list of licenses maintained by license sub-system. +.1.3.6.1.4.1.1991.1.1.2.15.1.1,FOUNDRY-SN-AGENT-MIB::fdryLicenseEntry,,not-accessible,fdryLicensePackageName:fdryLicenseLid:fdryLicenseHash,deprecated,,An entry in a license table. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.1,FOUNDRY-SN-AGENT-MIB::fdryLicensePackageName,OCTET,not-accessible,,deprecated,,Name of the package, whose license information, this entry displays. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.2,FOUNDRY-SN-AGENT-MIB::fdryLicenseLid,OCTET,not-accessible,,deprecated,,License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID is set as 2.0. This entry displays license information. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.3,FOUNDRY-SN-AGENT-MIB::fdryLicenseHash,OCTET,not-accessible,,deprecated,,A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.4,FOUNDRY-SN-AGENT-MIB::fdryLicenseType,INTEGER,read-only,,deprecated,normal(1):trial(2),The type of the license, which can be either normal or trial. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.5,FOUNDRY-SN-AGENT-MIB::fdryLicensePrecedence,Unsigned32,read-only,,deprecated,,Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, when there are many trial and normal licenses with same package name and LID. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.6,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialDays,Unsigned32,read-only,,deprecated,,The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.7,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialTimeElapsed,Unsigned32,read-only,,deprecated,,The cumulative number of hours used for this trial license. This counts all the usages of the trial license. For a normal license, this is 0. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.8,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialTimeLeft,Unsigned32,read-only,,deprecated,,The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours used. For a normal license, this is 0. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.9,FOUNDRY-SN-AGENT-MIB::fdryLicenseTrialState,INTEGER,read-only,,deprecated,invalid(1):unused(2):active(3):expired(4):duplicated(5),This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is never used, avtive means it has been used at least once and expired means it has expired and can't be used any more. Duplicated means the license has same package name with other license and but both serial numbers are different in the same device, this is only for the non-node locked license +.1.3.6.1.4.1.1991.1.1.2.15.1.1.10,FOUNDRY-SN-AGENT-MIB::fdryLicenseVendorInfo,OCTET,read-only,,deprecated,,This is the Ruckus Wireless specific package data which is an octet string. This contains encoded information of license specific information such as package bit mask, number of ports, etc. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.11,FOUNDRY-SN-AGENT-MIB::fdryLicenseSlot,Integer32,read-only,,deprecated,,This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID and can be present only in one slot. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.12,FOUNDRY-SN-AGENT-MIB::fdryLicenseMode,INTEGER,read-only,,deprecated,nodeLocked(1):nonNodeLocked(2),The mode of the license, which can be either node locked or non-node locked mode. +.1.3.6.1.4.1.1991.1.1.2.15.1.1.13,FOUNDRY-SN-AGENT-MIB::fdryLicenseSerialNumber,OCTET,read-only,,deprecated,,This is the serial number of the license. This is only for the non-node locked license +.1.3.6.1.4.1.1991.1.1.2.15.1.1.14,FOUNDRY-SN-AGENT-MIB::fdryLicenseCapacity,Integer32,read-only,,deprecated,,The capacity of the license. For POD license, this is the number of ports. For premium or advance license, it is 1 .1.3.6.1.4.1.1991.1.1.2.15.3,FOUNDRY-SN-AGENT-MIB::brcdPortLicenseTable,,not-accessible,,current,,A list of ports which require the port license. .1.3.6.1.4.1.1991.1.1.2.15.3.1,FOUNDRY-SN-AGENT-MIB::brcdPortLicenseEntry,,not-accessible,brcdPortLicenseIndex,current,,An entry in a licensed port table. .1.3.6.1.4.1.1991.1.1.2.15.3.1.1,FOUNDRY-SN-AGENT-MIB::brcdPortLicenseIndex,Integer32,not-accessible,,current,,The port/interface index (ifindex). .1.3.6.1.4.1.1991.1.1.2.15.3.1.2,FOUNDRY-SN-AGENT-MIB::brcdPortLicenseStatus,INTEGER,read-only,,current,validLic(1):noLic(2),The current license state of the port. validLic(1) ............ the port requires port license, and has valid license noLic(2) ........... the port requires port license, and doesn't have valid license -.1.3.6.1.4.1.1991.1.1.2.16,FOUNDRY-SN-AGENT-MIB::brcdSw,,,,,, -.1.3.6.1.4.1.1991.1.1.2.16.1,FOUNDRY-SN-AGENT-MIB::brcdSwPackageGroup,,,,,, -.1.3.6.1.4.1.1991.1.1.2.16.1.1,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgrade,,,,,, -.1.3.6.1.4.1.1991.1.1.2.16.1.1.1,FOUNDRY-SN-AGENT-MIB::brcdSwPackageFname,OCTET,read-write,,current,,Name of the release package file or manifest file (including path) currently associated with the system. When the object is not used, the value is a zero length string. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.2,FOUNDRY-SN-AGENT-MIB::brcdSwPackageLoad,INTEGER,read-write,,current,none(1):tftpToPrimary(2):tftpToSecondary(3):tftpToMgmtModulePrimaryIntfModuleSecondary(4):tftpToMgmtModuleSecondaryIntfModulePrimary(5),Action object to upgrade the system using a release package. none(1) is the value after the system comes up and should not be used for set-request. The following values will download the release package from a TFTP server and upgrade the system : tftpToPrimary(2) installs both MP and LP application images to primary code. tftpToSecondary(3) installs both MP and LP application images to secondary code. tftpToMgmtModulePrimaryIntfModuleSecondary (4) installs MP application image to primary code and the LP application images to secondary code. tftpToMgmtModuleSecondaryIntfModulePrimary (5) installs MP application image to secondary code and the LP application images to primary code. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.3,FOUNDRY-SN-AGENT-MIB::brcdSwPackageLoadStatus,INTEGER,read-only,,current,normal(1):started(2):internalError(3):manifestFileDownloadError(4):manifestFileValidationError(5):downloadingManagementModuleBoot(6):downloadingManagementModuleMonitor(7):downloadingManagementModuleApplication(8):downloadingInterfaceModuleBoot(9):downloadingInterfaceModuleMonitor(10):downloadingInterfaceModuleApplication(11):downloadingInterfaceModuleFpga(12):downloadingFpgaMBridge(13):downloadingFpgaSBridge(14):downloadingFpgaHBridge(15):upgradingManagementModuleBoot(16):upgradingManagementModuleMonitor(17):upgradingManagementModuleApplication(18):upgradingInterfaceModuleBoot(19):upgradingInterfaceModuleMonitor(20):upgradingInterfaceModuleApplication(21):upgradingInterfaceModuleFpga(22):upgradingFpgaMBridge(23):upgradingFpgaSBridge(24):upgradingFpgaHBridge(25),This object indicates the progress of the upgrade operation. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.4,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeAllImages,INTEGER,read-write,,current,true(1):false(2),To specify an all-image upgrade. If set to true(1), the upgrade sequence will include the MP FPGA images (MBRIDGE/MBRIDGE32 and SBRIDGE/HSBRIDGE). Default is false(2) which will upgrade only the MP and LP Monitor images, MP and LP Application images, and LP Bundled FPGA for MLX/XMR. While CES/CER will upgrade the monitor, application, and FPGA images. This object must be set along with brcdSwPackageLoad. For a read operation, this will always return false(2). DEFVAL { false } -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultTable,,not-accessible,,current,,A table containing the summary of the upgrade operation. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultEntry,,not-accessible,brcdSwPackageUpgradeResultIndex,current,, -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1.1,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultIndex,Unsigned32,not-accessible,,current,,The sequential index, or upgrade step. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1.2,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultImageType,INTEGER,read-only,,current,unknown(1):managementModuleBoot(2):managementModuleMonitor(3):managementModuleApplication(4):interfaceModuleBoot(5):interfaceModuleMonitor(6):interfaceModuleApplication(7):mgmtAndIntfModuleCombinedApp(8):fpgaMBridge(9):fpgaMBridge32(10):fpgaSBridge(11):fpgaHBridge(12):fpgaBundled(13):fpgaPbifOc(14):fpgaStatsOc(15):fpgaXppOc(16):fpgaPbifMrj(17):fpgaStatsMrj(18):fpgaXppMrj(19):fpgaPbifSp2(20):fpgaXgmacSp2(21):fpgaXppSp2(22):fpgaPbif8x10(23):fpgaXpp8x10(24):fpgaXpp2x100(25):fpgaPbifMetro(26):fpgaXpp4x40(27):fpgaPbif4x40(28),The associated image type for this step of upgrade process. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1.3,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultStatus,INTEGER,read-only,,current,ok(1):downloadFailed(2):installFailed(3):skipped(4):unknown(5),The upgrade status for this particular image upgrade. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1.4,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultTimeStamp,TimeTicks,read-only,,current,,The timestamp when this upgrade step was performed. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.5.1.5,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeResultDescription,OCTET,read-only,,current,,Summary description for this particular image upgrade. This is empty when brcdSwPackageLoadResultStatus is 'ok'. -.1.3.6.1.4.1.1991.1.1.2.16.1.1.6,FOUNDRY-SN-AGENT-MIB::brcdSwPackageUpgradeSkipVersionCheck,INTEGER,read-write,,current,true(1):false(2),To skip the version comparison of the FPGA images. By default it performs the version comparison between the image version in the manifest file and the one installed in in the system. Setting to 'true' forces the system to upgrade the images by skipping the version check. This object must be set along with brcdSwPackageLoad. For a read operation, this will always return false(2). DEFVAL { false } -.1.3.6.1.4.1.1991.1.1.2.16.1.2,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgrade,,,,,, -.1.3.6.1.4.1.1991.1.1.2.16.1.2.1,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgradeMode,INTEGER,read-write,,current,unknown(1):disabled(2):tftp(3):slot1(4):slot2(5),Specifies the mode of LP Auto-upgrade. -.1.3.6.1.4.1.1991.1.1.2.16.1.2.2,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgradeTftpAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2). -.1.3.6.1.4.1.1991.1.1.2.16.1.2.3,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgradeTftpAddr,OCTET,read-write,,current,,TFTP server IP address. -.1.3.6.1.4.1.1991.1.1.2.16.1.2.4,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgradeSrcPath,OCTET,read-write,,current,,Specifies the path to the topmost directory of the release package relative to the root directory. If the source is a TFTP server, the root is the TFTP root. If the source is slot1 or slot2, the root is top-level directory '/' -.1.3.6.1.4.1.1991.1.1.2.16.1.2.5,FOUNDRY-SN-AGENT-MIB::brcdSwIntfModAutoUpgradeAllImages,INTEGER,read-write,,deprecated,true(1):false(2),Used to specify an all-image upgrade. If set to true(1), the upgrade sequence will include the LP BOOT image. Default is false(2), which will upgrade only the LP FPGA images. For a read operation, this will return the configured value. Deprecated this OID. SET operation will not take into effect, and READ operations will always return 'false'. DEFVAL { false } -.1.3.6.1.4.1.1991.1.1.2.17,FOUNDRY-SN-AGENT-MIB::snAgentTask,,,,,, -.1.3.6.1.4.1.1991.1.1.2.17.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuTable,,not-accessible,,current,,Table to display the Task ID, Task Name, CPU state, wait time, hold time and Activity with respect to each task in the device . -.1.3.6.1.4.1.1991.1.1.2.17.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuEntry,,not-accessible,snAgentTaskCpuTaskID,current,,An entry containing the Task ID, Task Name, CPU state, wait time, hold time and Activity with respect to each task in the device -.1.3.6.1.4.1.1991.1.1.2.17.1.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuTaskID,Integer32,read-only,,current,,Represents the Task Identification number -.1.3.6.1.4.1.1991.1.1.2.17.1.1.2,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuTaskName,OCTET,read-only,,current,,Represents the Task name -.1.3.6.1.4.1.1991.1.1.2.17.1.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuState,OCTET,read-only,,current,,Represents the current state of the task -.1.3.6.1.4.1.1991.1.1.2.17.1.1.4,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuWaitTime,Gauge32,read-only,,current,,A count used to represent the wait time in milliseconds -.1.3.6.1.4.1.1991.1.1.2.17.1.1.5,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuHoldTime,Gauge32,read-only,,current,,A count used to represent the hold time in milliseconds -.1.3.6.1.4.1.1991.1.1.2.17.1.1.6,FOUNDRY-SN-AGENT-MIB::snAgentTaskCpuTaskActivity,OCTET,read-only,,current,,Represents the Task Activity.A - Was running since last show, I - Idle -.1.3.6.1.4.1.1991.1.1.2.17.2,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQTable,,not-accessible,,current,,Table to display the Message Queue Priority, Length, Depth, Msgs and the failed count with respect to each task and corresponding MQ priority in the device -.1.3.6.1.4.1.1991.1.1.2.17.2.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQEntry,,not-accessible,snAgentTaskMQTaskID:snAgentTaskMQPriority,current,,An entry containing the Message Queue Priority, Length, Depth, Msgs and the failed count with respect to each task and corresponding MQ priority in the device -.1.3.6.1.4.1.1991.1.1.2.17.2.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQTaskID,Integer32,read-only,,current,,Represents the Task Identification number -.1.3.6.1.4.1.1991.1.1.2.17.2.1.2,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQPriority,Integer32,read-only,,current,,Represents the Priority of the Message Queue -.1.3.6.1.4.1.1991.1.1.2.17.2.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQTaskName,OCTET,read-only,,current,,Represents the Task name -.1.3.6.1.4.1.1991.1.1.2.17.2.1.4,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQLength,Integer32,read-only,,current,,Represents the size of the Message Queue -.1.3.6.1.4.1.1991.1.1.2.17.2.1.5,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQDepth,Gauge32,read-only,,current,,A count used to represent the message queue depth -.1.3.6.1.4.1.1991.1.1.2.17.2.1.6,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQMaxDepth,Counter32,read-only,,current,,A count used to represent the maximum depth reached ever(clear on read counter) -.1.3.6.1.4.1.1991.1.1.2.17.2.1.7,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQStickyMaxDepth,Counter32,read-only,,current,,A count used to represent the maximum depth reached ever (This counter is not clear on read) -.1.3.6.1.4.1.1991.1.1.2.17.2.1.8,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQMsgs,Gauge32,read-only,,current,,A count used to represent the number of messages -.1.3.6.1.4.1.1991.1.1.2.17.2.1.9,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQMaxMsgs,Counter32,read-only,,current,,A count used to represent the maximum number of messages reached ever(clear on read counter) -.1.3.6.1.4.1.1991.1.1.2.17.2.1.10,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQStickyMaxMsgs,Counter32,read-only,,current,,A count used to represent the maximum number of messages reached ever (This counter is not clear on read) -.1.3.6.1.4.1.1991.1.1.2.17.2.1.11,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQFailedCount,Gauge32,read-only,,current,,A count used to represent failed count(clear on read counter) -.1.3.6.1.4.1.1991.1.1.2.17.2.1.12,FOUNDRY-SN-AGENT-MIB::snAgentTaskMQStickyFailedCount,Counter32,read-only,,current,,A count used to represent failed count(This counter is not clear on read) -.1.3.6.1.4.1.1991.1.1.2.17.3,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferTable,,not-accessible,,current,,Table to display the Task ID, Task name , Pool_ID and the buffer count of each task in the device -.1.3.6.1.4.1.1991.1.1.2.17.3.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferEntry,,not-accessible,snAgentTaskBufferTaskID:snAgentTaskBufferPoolID,current,,An entry containing the Task ID, Task name , Pool_ID and the buffer count of each task in the device -.1.3.6.1.4.1.1991.1.1.2.17.3.1.1,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferTaskID,Integer32,read-only,,current,,Represents the Task Identification number -.1.3.6.1.4.1.1991.1.1.2.17.3.1.2,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferPoolID,Integer32,read-only,,current,,Represents the Pool Identification number -.1.3.6.1.4.1.1991.1.1.2.17.3.1.3,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferTaskName,OCTET,read-only,,current,,Represents the Task name -.1.3.6.1.4.1.1991.1.1.2.17.3.1.4,FOUNDRY-SN-AGENT-MIB::snAgentTaskBufferCount,Gauge32,read-only,,current,,A count used to represent the number of buffers allocated to a task +.1.3.6.1.4.1.1991.1.1.2.15.4,FOUNDRY-SN-AGENT-MIB::snSAULicenseUnitTable,,not-accessible,,current,,A list of SAU licenses maintained by each unit. +.1.3.6.1.4.1.1991.1.1.2.15.4.1,FOUNDRY-SN-AGENT-MIB::snSAULicenseUnitEntry,,not-accessible,snSAULicenseUnitIndex,current,,An entry in SAU license table. +.1.3.6.1.4.1.1991.1.1.2.15.4.1.1,FOUNDRY-SN-AGENT-MIB::snSAULicenseUnitIndex,Integer32,not-accessible,,current,,The stacking unit Id +.1.3.6.1.4.1.1991.1.1.2.15.4.1.2,FOUNDRY-SN-AGENT-MIB::snSAULicensePackageName,OCTET,read-only,,current,,Name of the license package. +.1.3.6.1.4.1.1991.1.1.2.15.4.1.3,FOUNDRY-SN-AGENT-MIB::snSAUIsPremLicensePresent,INTEGER,read-only,,current,none(0):yes(1):no(2),The present state of L3 premium license. none means the license is not applicable to this device +.1.3.6.1.4.1.1991.1.1.2.15.4.1.4,FOUNDRY-SN-AGENT-MIB::snSAUIsPoDLicensePresent,INTEGER,read-only,,current,none(0):yes(1):no(2),The present state of PoD license. none means the license is not applicable to this device +.1.3.6.1.4.1.1991.1.1.2.15.4.1.5,FOUNDRY-SN-AGENT-MIB::snSAUPoDLicensedSpeed,INTEGER,read-only,,current,none(0):speed10G(1):speed25G(2),The port speed of PoD license. none means the license is not applicable to this device +.1.3.6.1.4.1.1991.1.1.2.15.4.1.6,FOUNDRY-SN-AGENT-MIB::snSAUPoDLicensedPorts,Integer32,read-only,,current,,The number of licensed ports. The capacity of PoD License. Zero means no PoD license or the license is not applicable to this device +.1.3.6.1.4.1.1991.1.1.2.15.4.1.7,FOUNDRY-SN-AGENT-MIB::snSAUIsMACSecLicensePresent,INTEGER,read-only,,current,none(0):yes(1):no(2),The present state of MACSec license. none means the license is not applicable to this device +.1.3.6.1.4.1.1991.1.1.2.15.4.1.8,FOUNDRY-SN-AGENT-MIB::snSAUPremSerialNumber,OCTET,read-only,,current,,This is the serial number of CoE L3 premium license. +.1.3.6.1.4.1.1991.1.1.2.15.4.1.9,FOUNDRY-SN-AGENT-MIB::snSAUPoDSerialNumber,OCTET,read-only,,current,,This is the serial number of CoE PoD license. +.1.3.6.1.4.1.1991.1.1.2.15.4.1.10,FOUNDRY-SN-AGENT-MIB::snSAUMACsecSerialNumber,OCTET,read-only,,current,,This is the serial number of CoE MACsec license. +.1.3.6.1.4.1.1991.1.1.2.15.4.1.11,FOUNDRY-SN-AGENT-MIB::snSAUICX7150SerialNumber,OCTET,read-only,,deprecated,,This is the serial number of CoE ICX7150 license. FOR ICX7150 platform, only one SAU license option can be installed. e.g. 4x10gr, It is combination of l3 premium and PoD license, thus there is only a license serial number at one time +.1.3.6.1.4.1.1991.1.1.2.15.4.1.12,FOUNDRY-SN-AGENT-MIB::snSAUICX8200SerialNumber,OCTET,read-only,,current,,This is the serial number of CoE ICX8200 license. FOR ICX8200 platform, only one SAU license option can be installed. e.g. 4x25gr, It is combination of l3 premium and PoD license, thus there is only a license serial number at one time .1.3.6.1.4.1.1991.1.1.3,BRCD-DOT1X-MIB::snSwitch,,,,,, .1.3.6.1.4.1.1991.1.1.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwInfo,,,,,, -.1.3.6.1.4.1.1991.1.1.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupOperMode,INTEGER,read-write,,current,noVLan(1):vlanByPort(2),noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basic VLAN (layer2 Switch). +.1.3.6.1.4.1.1991.1.1.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupOperMode,INTEGER,read-write,,current,noVLan(1):vlanByPort(2),noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basic VLAN (layer2 Switch). .1.3.6.1.4.1.1991.1.1.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupIpL3SwMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 IP Switch disabled(0)..........disable Layer3 IP Switch -.1.3.6.1.4.1.1991.1.1.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupIpMcastMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group is configured with the IP Multicast pruning mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IP Multicast pruning disabled(0)..........no IP Multicast pruning +.1.3.6.1.4.1.1991.1.1.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupIpMcastMode,INTEGER,read-write,,current,disabled(0):active(1):passive(2),The Switch Group is configured with the IP Multicast (IGMP snooping) mode either enabled (active or passive) or disabled and the default is disabled mode. disabled(0)......IP Multicast is disabled active(1)........this device generates IGMP queries, IP Multicast is enabled passive(2).......this device listens for IGMP packets, IP Multicast is enabled .1.3.6.1.4.1.1991.1.1.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupDefaultCfgMode,INTEGER,read-write,,current,default(1):nonDefault(2),The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1)...........default configuration nonDefault(2)..........non default configuration -.1.3.6.1.4.1.1991.1.1.3.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupSwitchAgeTime,Integer32,read-write,,current,,For FastIron: Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 seconds Default: 300 seconds. For NetIron: The Switch Age time is 180sec by default. The configured range is 10 to 10,000sec. The time represents the time span to age out an MAC Address entry. +.1.3.6.1.4.1.1991.1.1.3.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGroupSwitchAgeTime,Integer32,read-write,,current,,Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 seconds Default: 300 seconds. .1.3.6.1.4.1.1991.1.1.3.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanGroupVlanCurEntry,Integer32,read-only,,current,,The current total entry number of VLANs are configured. -.1.3.6.1.4.1.1991.1.1.3.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanGroupSetAllVLan,Integer32,read-write,,current,,The value of this object is the VLanIndex of a particalur entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except PortMask will be used to set the same attributes for the entire VLan group. VLanId and PortMask must be set for that particular entry prior to setting this object. Switch software will base on that VLAN information to set the entire VLAN. Note: All the intended attributes of the given row of the table (given VLAN) must be set prior setting this object. When this object is set, Set-All-VLAN action will take place simultaneously. The previous setting will be overwritten by the new one. -.1.3.6.1.4.1.1991.1.1.3.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortSetAll,Integer32,read-write,,current,,The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMode, snSwPortInfoSpeed, snSwPortInfoAdminStatus are all the read-write attributes of that row of table. They will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. +.1.3.6.1.4.1.1991.1.1.3.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanGroupSetAllVLan,Integer32,read-write,,current,,The value of this object is the VLanIndex of a particalur entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except PortMask will be used to set the same attributes for the entire VLan group. VLanId and PortMask must be set for that particular entry prior to setting this object. Switch software will base on that VLAN information to set the entire VLAN. Note: All the intended attributes of the given row of the table (given VLAN) must be set prior setting this object. When this object is set, Set-All-VLAN action will take place simultaneously. The previous setting will be overwritten by the new one. +.1.3.6.1.4.1.1991.1.1.3.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortSetAll,Integer32,read-write,,current,,The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMode, snSwPortInfoSpeed, snSwPortInfoAdminStatus are all the read-write attributes of that row of table. They will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. .1.3.6.1.4.1.1991.1.1.3.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbTableCurEntry,Integer32,read-only,,current,,The current total entry number of FDB are configured. -.1.3.6.1.4.1.1991.1.1.3.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbTableStationFlush,INTEGER,read-write,,current,normal(1):error(2):flush(3):flushing(4),The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value can be written: flush(3).....do flush The agent will return a response even before the flush is done. And the read value will be flushing until flush is done. And the flush request will be rejected until error or normal. -.1.3.6.1.4.1.1991.1.1.3.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpSetAll,Integer32,read-write,,current,,The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of the first row of table will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. -.1.3.6.1.4.1.1991.1.1.3.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwProbePortNum,Integer32,read-write,,current,,A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. A stackable switch is only assigned with one probe port as a traffic analyzer. +.1.3.6.1.4.1.1991.1.1.3.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbTableStationFlush,INTEGER,read-write,,current,normal(1):error(2):flush(3):flushing(4),The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value can be written: flush(3).....do flush The agent will return a response even before the flush is done. And the read value will be flushing until flush is done. And the flush request will be rejected until error or normal. +.1.3.6.1.4.1.1991.1.1.3.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpSetAll,Integer32,read-write,,current,,The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of the first row of table will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one. +.1.3.6.1.4.1.1991.1.1.3.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwProbePortNum,Integer32,read-write,,current,,A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. A stackable switch is only assigned with one probe port as a traffic analyzer. .1.3.6.1.4.1.1991.1.1.3.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snSw8021qTagMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE802.1q Tagging mode. disabled(0)..........no IEEE802.1q Tagging. -.1.3.6.1.4.1.1991.1.1.3.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGlobalStpMode,INTEGER,read-write,,current,disabled(0):enabled(1),Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree -.1.3.6.1.4.1.1991.1.1.3.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIpMcastQuerierMode,INTEGER,read-write,,current,querier(1):nonQuerier(2),The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic locally within the VLAN. nonQuerier(2)........when running with a multicast capable router in the network. -.1.3.6.1.4.1.1991.1.1.3.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwViolatorPortNumber,Integer32,read-only,,current,,The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). +.1.3.6.1.4.1.1991.1.1.3.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGlobalStpMode,INTEGER,read-write,,current,disabled(0):enabled(1),Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree +.1.3.6.1.4.1.1991.1.1.3.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIpMcastQuerierMode,INTEGER,read-write,,current,querier(1):nonQuerier(2),The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic locally within the VLAN. nonQuerier(2)........when running with a multicast capable router in the network. +.1.3.6.1.4.1.1991.1.1.3.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwViolatorPortNumber,Integer32,read-only,,current,,The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). .1.3.6.1.4.1.1991.1.1.3.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwViolatorMacAddress,OCTET,read-only,,current,,The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. -.1.3.6.1.4.1.1991.1.1.3.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanGroupVlanMaxEntry,Integer32,read-write,,current,,The maximum number of VLAN entries that are allowed to configure. On NetIron products, This object will be implemented as read-only. Set request will be returned with not writable error. To set the maximum allowed vlan, use snAgentSysParaConfigEntry. +.1.3.6.1.4.1.1991.1.1.3.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanGroupVlanMaxEntry,Integer32,read-write,,current,,The maximum number of VLAN entries are allowed to configure. .1.3.6.1.4.1.1991.1.1.3.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwEosBufferSize,Integer32,read-only,,current,,A specific buffer size for all the different EOS buffers. -.1.3.6.1.4.1.1991.1.1.3.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortEntrySize,Integer32,read-only,,current,,The size of each VLAN table entry. +.1.3.6.1.4.1.1991.1.1.3.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortEntrySize,Integer32,read-only,,deprecated,,The size of each VLAN table entry. .1.3.6.1.4.1.1991.1.1.3.1.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortEntrySize,Integer32,read-only,,current,,The size of each port table entry. .1.3.6.1.4.1.1991.1.1.3.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationEntrySize,Integer32,read-only,,current,,The size of each Fdb station table entry. .1.3.6.1.4.1.1991.1.1.3.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpEntrySize,Integer32,read-only,,current,,The size of each port stp table entry. .1.3.6.1.4.1.1991.1.1.3.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwEnableBridgeNewRootTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate bridge new root traps. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.1.3.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwEnableBridgeTopoChangeTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. DEFVAL { enabled } -.1.3.6.1.4.1.1991.1.1.3.1.27,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwEnableLockedAddrViolationTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate locked address violation traps. DEFVAL { enabled } -.1.3.6.1.4.1.1991.1.1.3.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIpxL3SwMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 Switch disabled(0)..........disable Layer3 Switch +.1.3.6.1.4.1.1991.1.1.3.1.27,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwEnableLockedAddrViolationTrap,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate locked address violation traps. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.3.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIpxL3SwMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 Switch disabled(0)..........disable Layer3 Switch .1.3.6.1.4.1.1991.1.1.3.1.29,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetMaxSubnets,Integer32,read-only,,current,,The maximum number of subnets for each IP VLAN. .1.3.6.1.4.1.1991.1.1.3.1.30,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetMaxNetworks,Integer32,read-only,,current,,The maximum number of networks for each IPX VLAN. -.1.3.6.1.4.1.1991.1.1.3.1.31,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwProtocolVLanMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). +.1.3.6.1.4.1.1991.1.1.3.1.31,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwProtocolVLanMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). .1.3.6.1.4.1.1991.1.1.3.1.32,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacStationVLanId,INTEGER,read-write,,deprecated,,This VLAN ID controls filtering of the Forwarding Database table in the standard Bridge MIB (dot1dTpFdbTable). Since the dot1dTpFdbTable contains MAC addresses associated with each of the ports in the bridge, and each MAC address can be associated with different VLANs, the snMacStationVLanId can be used by users to specify which VLAN's MAC Station information the dot1dTpFdbTable should provide. If this variable is set to zero (the default value), all MAC station entries will be returned when the dot1dTpFdbTable is retrieved. The VLAN-aware dot1qTpFdbTable described in RFC 2674 should be used as a replacement for this variable. -.1.3.6.1.4.1.1991.1.1.3.1.33,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwClearCounters,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP and IPX counters for all ports. +.1.3.6.1.4.1.1991.1.1.3.1.33,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwClearCounters,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP and IPX counters for all ports. .1.3.6.1.4.1.1991.1.1.3.1.34,FOUNDRY-SN-SWITCH-GROUP-MIB::snSw8021qTagType,Integer32,read-write,,current,,The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. DEFVAL { 33024 } -.1.3.6.1.4.1.1991.1.1.3.1.35,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwBroadcastLimit,Integer32,read-write,,current,,Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of 0 to this object disables the limitation check. This object is deprecated by snSwBroadcastLimit2 on NI platform. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.1.35,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwBroadcastLimit,Integer32,read-write,,obsolete,,Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of 0 to this object disables the limitation check. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.1.3.1.36,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwMaxMacFilterPerSystem,Integer32,read-only,,current,,The maximum number of MAC Filters per system in the MAC Filter table. .1.3.6.1.4.1.1991.1.1.3.1.37,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwMaxMacFilterPerPort,Integer32,read-only,,current,,The maximum number of MAC Filters per port in the Port MAC Access Filter table. .1.3.6.1.4.1.1991.1.1.3.1.38,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwDefaultVLanId,INTEGER,read-write,,current,,The VLAN ID of the DEFAULT PORT-VLAN. .1.3.6.1.4.1.1991.1.1.3.1.39,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwGlobalAutoNegotiate,INTEGER,read-write,,current,disabled(0):enabled(1):negFullAuto(2):other(3),This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1), all Gigabit Ethernet ports will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), all Gigabit Ethernet ports will start with auto-negotiation, if the negotiation failed, then they will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If the snSwPortInfoAutoNegotiate value of a port was not set to global, this global value does not apply to the negotiation mode of that port. DEFVAL { negFullAuto } -.1.3.6.1.4.1.1991.1.1.3.1.40,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwQosMechanism,INTEGER,read-write,,current,strict(0):weighted(1),Indicates whether the qos mechanism is strict or weighted. This object is not supported on NI platform. DEFVAL { weighted } -.1.3.6.1.4.1.1991.1.1.3.1.41,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSingleStpMode,INTEGER,read-write,,current,disable(0):enableStp(1):enableRstp(2),Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spanning Tree enableStp(1).........activate SSTP control vlan to run Spanning Tree enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree -.1.3.6.1.4.1.1991.1.1.3.1.42,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwFastStpMode,INTEGER,read-write,,current,disabled(0):enabled(1),Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree -.1.3.6.1.4.1.1991.1.1.3.1.43,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwViolatorIfIndex,Integer32,read-only,,current,,The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. +.1.3.6.1.4.1.1991.1.1.3.1.40,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwQosMechanism,INTEGER,read-write,,current,strict(0):weighted(1),Indicates whether the qos mechanism is strict or weighted. DEFVAL { weighted } +.1.3.6.1.4.1.1991.1.1.3.1.41,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSingleStpMode,INTEGER,read-write,,current,disable(0):enableStp(1):enableRstp(2),Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spanning Tree enableStp(1).........activate SSTP control vlan to run Spanning Tree enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree +.1.3.6.1.4.1.1991.1.1.3.1.42,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwFastStpMode,INTEGER,read-write,,current,disabled(0):enabled(1),Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree +.1.3.6.1.4.1.1991.1.1.3.1.43,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwViolatorIfIndex,Integer32,read-only,,deprecated,,The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. .1.3.6.1.4.1.1991.1.1.3.1.44,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSingleStpVLanId,Integer32,read-only,,current,,The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tree was disabled. -.1.3.6.1.4.1.1991.1.1.3.1.45,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwBroadcastLimit2,Unsigned32,read-write,,current,,Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. DEFVAL { 4294967295 } +.1.3.6.1.4.1.1991.1.1.3.1.45,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwJumboMode,INTEGER,read-write,,current,disabled(0):enabled(1),The jumbo mode on the Switch can be set either enabled or disabled and the default is disabled mode. The jumbo frame (10200 bytes) can be supported if this mode is enabled. Please note that enabling/disabling jumbo mode will be effected only after saving configuration and system reload . disabled(0)..........disable jumbo mode enabled(1)...........enable jumbo mode +.1.3.6.1.4.1.1991.1.1.3.1.46,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwACLPerPortPerVlanMode,INTEGER,read-write,,current,disabled(0):enabled(1),The ACL Per port per VLAN mode on the Switch can be set either enabled or disabled and the default is disabled mode. Allow the access list on selective ports of VLAN or VE if this mode is enabled. Please note that enabling/disabling ACL Per port per VLAN will be effected only after saving configuration and system reload disabled(0)..........disable ACL per port per VLAN enabled(1)...........enable ACL per port per VLAN +.1.3.6.1.4.1.1991.1.1.3.1.47,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIpMcastVersion,Integer32,read-write,,current,,Multicast version at the globle level can be set 2 or 3, and the default is 2 +.1.3.6.1.4.1.1991.1.1.3.1.48,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwMgmtVlan,Integer32,read-only,,current,,VLAN can be a part of the management VLAN. It dedicates this VLAN for management purpose. The value 0 means that the management VLAN is not configurated, or is not applicable, e.g. in Router image +.1.3.6.1.4.1.1991.1.1.3.1.49,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwErrDisableRecoveryTimeout,Unsigned32,read-write,,current,,Configure the errdisable timeout value in second. Valid values: 0 = default value, or 10 - 65535 seconds Default: 300 seconds. +.1.3.6.1.4.1.1991.1.1.3.1.50,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwErrDisableRecoveryCause,Unsigned32,read-write,,current,,Configure the errdisable cause support recovery. Valid values: 0 = no recovery is supported, or other value, bit 0 - Enable auto-recovery from all causes bit 1 - Enable auto-recovery from BPDU guard bit 2 - Enable auto-recovery from loop-detection bit 4 - Enable auto-recovery from packet inError bit 5 - Enable auto-recovery from LOAM remote critical event bit 12 - Enable auto-recovery from pvstplus-protect bit 13 - Enable auto-recovery from bpdu tunnel threshold bit 14 - Enable auto-recovery from lag operational speed mismatch Default: 0 +.1.3.6.1.4.1.1991.1.1.3.1.51,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwFwdProfileNumber,INTEGER,read-only,,current,none(0):profile1(1):profile2(2):profile3(3):profile4(4),Tells us the current forwarding profile loaded on the ICX Unit. Only Applicable for 7850 and 7550 0 - Forwarding Profile Not Supported on Unit 1 - Forwarding Profile 1 is loaded 2 - Forwarding Profile 2 is loaded 3 - Forwarding Profile 3 is loaded 4 - Forwarding Profile 4 is loaded .1.3.6.1.4.1.1991.1.1.3.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanInfo,,,,,, .1.3.6.1.4.1.1991.1.1.3.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortTable,,not-accessible,,deprecated,,If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number of VLAN IDs. -.1.3.6.1.4.1.1991.1.1.3.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortEntry,,not-accessible,snVLanByPortVLanIndex,deprecated,,An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Global switch group i.e. noVLan. A SNMP SET PDU for a row of the snVLanByPortTable requires the entired sequence of the MIB Objects in each snVLanByPortEntry stored in one PDU. Otherwise, GENERR return-value will be returned. -.1.3.6.1.4.1.1991.1.1.3.2.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortVLanIndex,INTEGER,read-only,,deprecated,,The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. -.1.3.6.1.4.1.1991.1.1.3.2.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortVLanId,INTEGER,read-write,,deprecated,,The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. +.1.3.6.1.4.1.1991.1.1.3.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortEntry,,not-accessible,snVLanByPortVLanIndex,deprecated,,An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Global switch group i.e. noVLan. A SNMP SET PDU for a row of the snVLanByPortTable requires the entired sequence of the MIB Objects in each snVLanByPortEntry stored in one PDU. Otherwise, GENERR return-value will be returned. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortVLanIndex,INTEGER,read-only,,deprecated,,The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortVLanId,INTEGER,read-only,,deprecated,,The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. .1.3.6.1.4.1.1991.1.1.3.2.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortPortMask,Integer32,read-write,,deprecated,,The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortQos,INTEGER,read-write,,deprecated,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch VLAN Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) -.1.3.6.1.4.1.1991.1.1.3.2.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpMode,INTEGER,read-write,,deprecated,disable(0):enableStp(1):enableRstp(2),Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree -.1.3.6.1.4.1.1991.1.1.3.2.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpPriority,INTEGER,read-write,,deprecated,,dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. -.1.3.6.1.4.1.1991.1.1.3.2.1.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupMaxAge,INTEGER,read-write,,deprecated,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpMode,INTEGER,read-write,,deprecated,disable(0):enableStp(1):enableRstp(2),Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree +.1.3.6.1.4.1.1991.1.1.3.2.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpPriority,INTEGER,read-write,,deprecated,,dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupMaxAge,INTEGER,read-write,,deprecated,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. .1.3.6.1.4.1.1991.1.1.3.2.1.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupHelloTime,INTEGER,read-write,,deprecated,,dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. .1.3.6.1.4.1.1991.1.1.3.2.1.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupForwardDelay,INTEGER,read-write,,deprecated,,dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. .1.3.6.1.4.1.1991.1.1.3.2.1.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid @@ -3626,89 +3604,89 @@ .1.3.6.1.4.1.1991.1.1.3.2.1.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpForwardDelay,Integer32,read-only,,deprecated,,dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] .1.3.6.1.4.1.1991.1.1.3.2.1.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpTimeSinceTopologyChange,TimeTicks,read-only,,deprecated,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. .1.3.6.1.4.1.1991.1.1.3.2.1.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpTopChanges,Counter32,read-only,,deprecated,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized. -.1.3.6.1.4.1.1991.1.1.3.2.1.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpRootCost,Integer32,read-only,,deprecated,,dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpRootCost,Integer32,read-only,,deprecated,,dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. .1.3.6.1.4.1.1991.1.1.3.2.1.1.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpRootPort,Integer32,read-only,,deprecated,,dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. .1.3.6.1.4.1.1991.1.1.3.2.1.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortStpDesignatedRoot,OCTET,read-only,,deprecated,,dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. .1.3.6.1.4.1.1991.1.1.3.2.1.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortBaseBridgeAddress,OCTET,read-only,,deprecated,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. .1.3.6.1.4.1.1991.1.1.3.2.1.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortVLanName,OCTET,read-write,,deprecated,,VLAN Community Name string. .1.3.6.1.4.1.1991.1.1.3.2.1.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortRouterIntf,Integer32,read-write,,deprecated,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. .1.3.6.1.4.1.1991.1.1.3.2.1.1.27,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortChassisPortMask,OCTET,read-write,,deprecated,,The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList) -.1.3.6.1.4.1.1991.1.1.3.2.1.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortPortList,OCTET,read-write,,deprecated,,A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolTable,,not-accessible,,current,,. -.1.3.6.1.4.1.1991.1.1.3.2.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolEntry,,not-accessible,snVLanByProtocolVLanId:snVLanByProtocolIndex,current,,An entry in the VLAN By Protocol Configuration table. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanId,INTEGER,read-only,,current,,The VLAN ID index to both of the VLAN By Port Info Table and this table. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolIndex,INTEGER,read-only,,current,ip(1):ipx(2):appleTalk(3):decNet(4):netBios(5):others(6):ipv6(7), The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), others(6) -- other protocols which are defined here. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamic,INTEGER,read-write,,current,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. +.1.3.6.1.4.1.1991.1.1.3.2.1.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortPortList,OCTET,read-only,,deprecated,,A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolTable,,not-accessible,,deprecated,,. +.1.3.6.1.4.1.1991.1.1.3.2.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolEntry,,not-accessible,snVLanByProtocolVLanId:snVLanByProtocolIndex,deprecated,,An entry in the VLAN By Protocol Configuration table. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanId,INTEGER,read-only,,deprecated,,The VLAN ID index to both of the VLAN By Port Info Table and this table. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolIndex,INTEGER,read-only,,deprecated,ip(1):ipx(2):appleTalk(3):decNet(4):netBios(5):others(6):ipv6(7), The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), others(6) -- other protocols which are defined here. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamic,INTEGER,read-write,,deprecated,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. .1.3.6.1.4.1.1991.1.1.3.2.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolStaticMask,Integer32,read-write,,deprecated,,The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolExcludeMask,Integer32,read-write,,deprecated,,The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product) -.1.3.6.1.4.1.1991.1.1.3.2.2.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolRouterIntf,INTEGER,read-write,,current,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.2.2.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolRouterIntf,INTEGER,read-write,,deprecated,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.2.2.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamicMask,Integer32,read-only,,deprecated,,The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.2.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList) .1.3.6.1.4.1.1991.1.1.3.2.2.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList) .1.3.6.1.4.1.1991.1.1.3.2.2.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList) -.1.3.6.1.4.1.1991.1.1.3.2.2.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanName,OCTET,read-write,,current,,VLAN Community Name string. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolStaticPortList,OCTET,read-write,,current,,A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolExcludePortList,OCTET,read-write,,current,,A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.2.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamicPortList,OCTET,read-only,,current,,A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetTable,,not-accessible,,current,,An entry of the VLAN By IPX Network Number Table. -.1.3.6.1.4.1.1991.1.1.3.2.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetEntry,,not-accessible,snVLanByIpSubnetVLanId:snVLanByIpSubnetIpAddress:snVLanByIpSubnetSubnetMask,current,,An entry in the VLAN By IP Subnet Configuration table. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanId,INTEGER,read-only,,current,,The VLAN ID index to both of the VLAN By Port Info Table and this table. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetIpAddress,IpAddress,read-only,,current,,Subnet IP address. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetSubnetMask,IpAddress,read-only,,current,,Subnet mask associated with the Subnet IP address. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamic,INTEGER,read-write,,current,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanName,OCTET,read-write,,deprecated,,VLAN Community Name string. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolStaticPortList,OCTET,read-write,,deprecated,,A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolExcludePortList,OCTET,read-write,,deprecated,,A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.2.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamicPortList,OCTET,read-only,,deprecated,,A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetTable,,not-accessible,,deprecated,,An entry of the VLAN By IPX Network Number Table. +.1.3.6.1.4.1.1991.1.1.3.2.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetEntry,,not-accessible,snVLanByIpSubnetVLanId:snVLanByIpSubnetIpAddress:snVLanByIpSubnetSubnetMask,deprecated,,An entry in the VLAN By IP Subnet Configuration table. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanId,INTEGER,read-only,,deprecated,,The VLAN ID index to both of the VLAN By Port Info Table and this table. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetIpAddress,IpAddress,read-only,,deprecated,,Subnet IP address. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetSubnetMask,IpAddress,read-only,,deprecated,,Subnet mask associated with the Subnet IP address. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamic,INTEGER,read-write,,deprecated,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. .1.3.6.1.4.1.1991.1.1.3.2.3.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetStaticMask,Integer32,read-write,,deprecated,,The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.3.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetExcludeMask,Integer32,read-write,,deprecated,,The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product) -.1.3.6.1.4.1.1991.1.1.3.2.3.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRouterIntf,INTEGER,read-write,,current,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.2.3.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRouterIntf,INTEGER,read-write,,deprecated,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.2.3.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamicMask,Integer32,read-only,,deprecated,,The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.3.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList) .1.3.6.1.4.1.1991.1.1.3.2.3.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList) .1.3.6.1.4.1.1991.1.1.3.2.3.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList) -.1.3.6.1.4.1.1991.1.1.3.2.3.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanName,OCTET,read-write,,current,,VLAN Community Name string. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetStaticPortList,OCTET,read-write,,current,,A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetExcludePortList,OCTET,read-write,,current,,A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.3.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamicPortList,OCTET,read-only,,current,,A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetTable,,not-accessible,,current,,An entry of the VLAN By IPX Network Number Table. -.1.3.6.1.4.1.1991.1.1.3.2.4.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetEntry,,not-accessible,snVLanByIpxNetVLanId:snVLanByIpxNetNetworkNum:snVLanByIpxNetFrameType,current,,An entry in the VLAN By Ipx Network Number Configuration table. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanId,INTEGER,read-only,,current,,The VLAN ID index to both of the VLAN By Port Info Table and this table. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetNetworkNum,OCTET,read-only,,current,,IPX Network Number. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetFrameType,INTEGER,read-only,,current,notApplicable(0):ipxEthernet8022(1):ipxEthernet8023(2):ipxEthernetII(3):ipxEthernetSnap(4), The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamic,INTEGER,read-write,,current,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanName,OCTET,read-write,,deprecated,,VLAN Community Name string. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetStaticPortList,OCTET,read-write,,deprecated,,A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetExcludePortList,OCTET,read-write,,deprecated,,A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.3.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamicPortList,OCTET,read-only,,deprecated,,A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetTable,,not-accessible,,deprecated,,An entry of the VLAN By IPX Network Number Table. +.1.3.6.1.4.1.1991.1.1.3.2.4.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetEntry,,not-accessible,snVLanByIpxNetVLanId:snVLanByIpxNetNetworkNum:snVLanByIpxNetFrameType,deprecated,,An entry in the VLAN By Ipx Network Number Configuration table. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanId,INTEGER,read-only,,deprecated,,The VLAN ID index to both of the VLAN By Port Info Table and this table. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetNetworkNum,OCTET,read-only,,deprecated,,IPX Network Number. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetFrameType,INTEGER,read-only,,deprecated,notApplicable(0):ipxEthernet8022(1):ipxEthernet8023(2):ipxEthernetII(3):ipxEthernetSnap(4), The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamic,INTEGER,read-write,,deprecated,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. .1.3.6.1.4.1.1991.1.1.3.2.4.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetStaticMask,Integer32,read-write,,deprecated,,The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.4.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetExcludeMask,Integer32,read-write,,deprecated,,The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product) -.1.3.6.1.4.1.1991.1.1.3.2.4.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRouterIntf,INTEGER,read-write,,current,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.2.4.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRouterIntf,INTEGER,read-write,,deprecated,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.2.4.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamicMask,Integer32,read-only,,deprecated,,The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product) .1.3.6.1.4.1.1991.1.1.3.2.4.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList) .1.3.6.1.4.1.1991.1.1.3.2.4.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList) .1.3.6.1.4.1.1991.1.1.3.2.4.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList) -.1.3.6.1.4.1.1991.1.1.3.2.4.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanName,OCTET,read-write,,current,,VLAN Community Name string. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetStaticPortList,OCTET,read-write,,current,,A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetExcludePortList,OCTET,read-write,,current,,A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.4.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamicPortList,OCTET,read-only,,current,,A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. -.1.3.6.1.4.1.1991.1.1.3.2.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableTable,,not-accessible,,current,,A Table Of VLAN By AppleTalk Network Number. -.1.3.6.1.4.1.1991.1.1.3.2.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableEntry,,not-accessible,snVLanByATCableVLanId:snVLanByATCableIndex,current,,An entry of the AppleTalk Cable VLAN table. -.1.3.6.1.4.1.1991.1.1.3.2.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanId,INTEGER,read-only,,current,,The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. -.1.3.6.1.4.1.1991.1.1.3.2.5.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableIndex,Integer32,read-only,,current,,AppleTalk Cable VLAN index number. -.1.3.6.1.4.1.1991.1.1.3.2.5.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableRouterIntf,INTEGER,read-write,,current,,A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interface was not configured. -.1.3.6.1.4.1.1991.1.1.3.2.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.2.4.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanName,OCTET,read-write,,deprecated,,VLAN Community Name string. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetStaticPortList,OCTET,read-write,,deprecated,,A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetExcludePortList,OCTET,read-write,,deprecated,,A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.4.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamicPortList,OCTET,read-only,,deprecated,,A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableTable,,not-accessible,,deprecated,,A Table Of VLAN By AppleTalk Network Number. +.1.3.6.1.4.1.1991.1.1.3.2.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableEntry,,not-accessible,snVLanByATCableVLanId:snVLanByATCableIndex,deprecated,,An entry of the AppleTalk Cable VLAN table. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanId,INTEGER,read-only,,deprecated,,The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableIndex,Integer32,read-only,,deprecated,,AppleTalk Cable VLAN index number. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableRouterIntf,INTEGER,read-write,,deprecated,,A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interface was not configured. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.2.5.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableChassisStaticMask,OCTET,read-write,,deprecated,,A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList) -.1.3.6.1.4.1.1991.1.1.3.2.5.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanName,OCTET,read-write,,current,,VLAN Name string. -.1.3.6.1.4.1.1991.1.1.3.2.5.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableStaticPortList,OCTET,read-write,,current,,A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanName,OCTET,read-write,,deprecated,,VLAN Name string. +.1.3.6.1.4.1.1991.1.1.3.2.5.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByATCableStaticPortList,OCTET,read-write,,deprecated,,A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. .1.3.6.1.4.1.1991.1.1.3.2.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberTable,,not-accessible,,current,,Port VLAN (Layer 2 VLAN) port membership table. .1.3.6.1.4.1.1991.1.1.3.2.6.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberEntry,,not-accessible,snVLanByPortMemberVLanId:snVLanByPortMemberPortId,current,,An entry of the port VLAN membership table. .1.3.6.1.4.1.1991.1.1.3.2.6.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberVLanId,INTEGER,read-only,,current,,The VLAN identifier (VLAN ID). .1.3.6.1.4.1.1991.1.1.3.2.6.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberPortId,Integer32,read-only,,current,,The ifIndex which is a member of the port VLAN. -.1.3.6.1.4.1.1991.1.1.3.2.6.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.1.3.2.6.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberTagMode,INTEGER,read-write,,current,tagged(1):untagged(2),For tagged/dual-mode port, we could have multiple VLANs per port. For untagged port, there is only one VLAN ID per port. +.1.3.6.1.4.1.1991.1.1.3.2.6.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.2.6.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortMemberTagMode,INTEGER,read-write,,current,tagged(1):untagged(2),Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-default VLAN. Configure an interface as untagged member of non-default VLAN, that interface will be moved from default VLAN to the configured VLAN. .1.3.6.1.4.1.1991.1.1.3.2.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgTable,,not-accessible,,current,,Port VLAN (Layer 2 VLAN) configuration table. .1.3.6.1.4.1.1991.1.1.3.2.7.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgEntry,,not-accessible,snVLanByPortCfgVLanId,current,,An entry of the port VLAN configuration table. .1.3.6.1.4.1.1991.1.1.3.2.7.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgVLanId,INTEGER,read-only,,current,,The VLAN identifier (VLAN ID). .1.3.6.1.4.1.1991.1.1.3.2.7.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgQos,INTEGER,read-write,,current,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7):invalid(127),The Stand alone stackable switch VLAN Priority values are: level0(0) -- low prority level1(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7). Value invalid(127) is used by CES/CER products to signify that no QoS was specified for this VLAN. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpMode,INTEGER,read-write,,current,disable(0):enableStp(1):enableRstp(2),Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree -.1.3.6.1.4.1.1991.1.1.3.2.7.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpPriority,INTEGER,read-write,,current,,dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupMaxAge,Integer32,read-write,,current,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 6 and 40. Default is 20 seconds. Value 0 is returned if no STP is not configured for this vlan. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpMode,INTEGER,read-write,,current,disable(0):enableStp(1):enableRstp(2),Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activate Rapid Spanning Tree +.1.3.6.1.4.1.1991.1.1.3.2.7.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpPriority,INTEGER,read-write,,current,,dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupMaxAge,Integer32,read-write,,current,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 6 and 40. Default is 20 seconds. Value 0 is returned if no STP is not configured for this vlan. .1.3.6.1.4.1.1991.1.1.3.2.7.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupHelloTime,Integer32,read-write,,current,,dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 1 and 10. Default is 2 seconds. Value 0 is returned if no STP is not configured for this vlan. .1.3.6.1.4.1.1991.1.1.3.2.7.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupForwardDelay,Integer32,read-write,,current,,dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. Valid value between 2 and 30. Default is 15 seconds. Value 0 is returned if no STP is not configured for this vlan. .1.3.6.1.4.1.1991.1.1.3.2.7.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgBaseNumPorts,Integer32,read-only,,current,,The number of ports controlled by this bridging entity. @@ -3720,59 +3698,44 @@ .1.3.6.1.4.1.1991.1.1.3.2.7.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpForwardDelay,Integer32,read-only,,current,,dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] .1.3.6.1.4.1.1991.1.1.3.2.7.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpTimeSinceTopologyChange,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. .1.3.6.1.4.1.1991.1.1.3.2.7.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpTopChanges,Counter32,read-only,,current,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpRootCost,Integer32,read-only,,current,,dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpRootCost,Integer32,read-only,,current,,dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. .1.3.6.1.4.1.1991.1.1.3.2.7.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpRootPort,Integer32,read-only,,current,,dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. .1.3.6.1.4.1.1991.1.1.3.2.7.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpDesignatedRoot,OCTET,read-only,,current,,dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. .1.3.6.1.4.1.1991.1.1.3.2.7.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgBaseBridgeAddress,OCTET,read-only,,current,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. .1.3.6.1.4.1.1991.1.1.3.2.7.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgVLanName,OCTET,read-write,,current,,VLAN Community Name string. .1.3.6.1.4.1.1991.1.1.3.2.7.1.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgRouterIntf,Integer32,read-write,,current,,Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3),Use this object to delete a vlan entry. For read operation, its value is 'valid' if it is a user-configured VLAN and 'other' if it is a control-VLAN. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3),Use object to delete a vlan entry. .1.3.6.1.4.1.1991.1.1.3.2.7.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpVersion,INTEGER,read-write,,current,stpCompatible(0):rstp(2),The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w. New value may be defined as future versions of the protocol become available. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgInOctets,Counter64,read-only,,current,,The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE. -.1.3.6.1.4.1.1991.1.1.3.2.7.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgTransparentHwFlooding,INTEGER,read-write,,current,disabled(0):enabled(1),Specifies the transparent VLAN flooding feature. DEFVAL { disabled } -.1.3.6.1.4.1.1991.1.1.3.2.8,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsTable,,not-accessible,,current,,This table contains the extended statistics for VLAN ports of G2 and later modules. Not applicable for G1 cards. These applies to L2 VLANs and as well as port VLANs that are associated to IP interfaces (physical or VE). -.1.3.6.1.4.1.1991.1.1.3.2.8.1,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsEntry,,not-accessible,brcdVlanExtStatsVlanId:brcdVlanExtStatsIfIndex:brcdVlanExtStatsPriorityId,current,,A row in this table represents a VLAN extended statistics accounting entry. It can be a per-VLAN/port entry, in this case the Priority-ID is 128 (invalid). It can also be in a priority level granularity of the VLAN port, in this case the Priority-ID specifies which port QOS priority, and Priority-ID 128 is the index to the aggregate count bucket. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsVlanId,Integer32,not-accessible,,current,,The VLAN identifier (VLAN ID). -.1.3.6.1.4.1.1991.1.1.3.2.8.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsIfIndex,Integer32,not-accessible,,current,,The ifIndex of the port belonging to this VLAN. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsPriorityId,INTEGER,not-accessible,,current,priority0(1):priority1(2):priority2(3):priority3(4):priority4(5):priority5(6):priority6(7):priority7(8):nonPriority(128),Identifies the port QOS priority. The values 1 through 8 internally maps to priorities 0 through 7. The value 128 indicates that priority-level accounting is not enabled -.1.3.6.1.4.1.1991.1.1.3.2.8.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInSwitchedPkts,Counter64,read-only,,current,,The number of valid frames received by this port classified as belongingto this VLAN for switched packets. The value is applicable only if thesystem was configured to separately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInRoutedPkts,Counter64,read-only,,current,, The number of valid frames received by this port classified as belongingto this VLAN for routed packets. The value is applicable only if the systemwas configured to separately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInPkts,Counter64,read-only,,current,,The number of valid frames received by this port classified as belongingto this VLAN for both switched and routed packets. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutSwitchedPkts,Counter64,read-only,,current,,The number of valid frames transmitted by this port classified as belonging to this VLAN for switched packets. The value is applicable only if the system was configured to separately count the two types of packets. Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutRoutedPkts,Counter64,read-only,,current,,The number of valid frames transmitted by this port classified as belonging to this VLAN for routed packets. The value is applicable only if the system was configured to separately count the two types of packets. Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutPkts,Counter64,read-only,,current,,The number of valid frames transmitted by this port classified as belonging to this VLAN for both switched and routed packets. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInSwitchedOctets,Counter64,read-only,,current,,The bytes count received by this port classified asbelonging to this VLAN for switched packets. The valueis applicable only if the system was configured toseparately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInRoutedOctets,Counter64,read-only,,current,,The bytes count received by this port classified asbelonging to this VLAN for routed packets. The valueis applicable only if the system was configured toseparately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsInOctets,Counter64,read-only,,current,,The bytes count received by this port classifiedas belonging to this VLAN for both switched androuted packets. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutSwitchedOctets,Counter64,read-only,,current,,The bytes count transmitted by this port classifiedas belonging to this VLAN for switched packets.The value is applicable only if the system was configuredto separately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutRoutedOctets,Counter64,read-only,,current,,The bytes count transmitted by this port classifiedas belonging to this VLAN for routed packets.The value is applicable only if the system was configuredto separately count the two types of packets.Otherwise, it returns 0. -.1.3.6.1.4.1.1991.1.1.3.2.8.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdVlanExtStatsOutOctets,Counter64,read-only,,current,,The bytes count transmitted by this port classifiedas belonging to this VLAN for both switched androuted packets. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgInOctets,Counter64,read-only,,deprecated,,The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE. +.1.3.6.1.4.1.1991.1.1.3.2.7.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgMcastMode,INTEGER,read-write,,current,disabled(0):active(1):passive(2),Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabled on this VLAN active(1)........this VLAN generates IGMP queries passive(2).......this VLAN listens for IGMP packets +.1.3.6.1.4.1.1991.1.1.3.2.7.1.27,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgMcastVersion,Integer32,read-write,,current,,Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0 +.1.3.6.1.4.1.1991.1.1.3.2.7.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanByPortCfgLoopDetectionMode,INTEGER,read-write,,current,true(1):false(2),Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. There are 2 modes to this feature. Strict Mode (Per Port) and Loose Mode (Per VLAN). This object focusses on the Loose Mode, where a loop is detected if a test packet is received on the same vlan on which it was sent. The default is false state. DEFVAL { false } .1.3.6.1.4.1.1991.1.1.3.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfo,,,,,, -.1.3.6.1.4.1.1991.1.1.3.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoTable,,not-accessible,,deprecated,,A specific snSwPortInfo group consists of a number of switch ports. -.1.3.6.1.4.1.1991.1.1.3.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoEntry,,not-accessible,snSwPortInfoPortNum,deprecated,,An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequence of the MIB Objects in each snSwPortInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoPortNum,Integer32,read-only,,deprecated,,The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). +.1.3.6.1.4.1.1991.1.1.3.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoTable,,not-accessible,,deprecated,,A specific snSwPortInfo group consists of a number of switch ports. +.1.3.6.1.4.1.1991.1.1.3.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoEntry,,not-accessible,snSwPortInfoPortNum,deprecated,,An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequence of the MIB Objects in each snSwPortInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoPortNum,Integer32,read-only,,deprecated,,The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). .1.3.6.1.4.1.1991.1.1.3.3.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoMonitorMode,INTEGER,read-write,,deprecated,disabled(0):input(1):output(2):both(3),DEPRECATED by snSwPortInfoMirrorMode and snPortMonitorTable. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoTagMode,INTEGER,read-write,,deprecated,tagged(1):untagged(2):auto(3):disabled(4),For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoChnMode,INTEGER,read-write,,deprecated,none(0):halfDuplex(1):fullDuplex(2),The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). -.1.3.6.1.4.1.1991.1.1.3.3.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed,INTEGER,read-write,,deprecated,none(0):sAutoSense(1):s10M(2):s100M(3):s1G(4):s1GM(5):s155M(6):s10G(7):s622M(8):s2488M(9):s9953M(10):s16G(11):s40G(13):s2500M(14),The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). -.1.3.6.1.4.1.1991.1.1.3.3.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoMediaType,INTEGER,read-only,,deprecated,other(1):m100BaseTX(2):m100BaseFX(3):m1000BaseFX(4):mT3(5):m155ATM(6):m1000BaseTX(7):m622ATM(8):m155POS(9):m622POS(10):m2488POS(11):m10000BaseFX(12):m9953POS(13):m16GStacking(14):m100GBaseFX(15):m40GStacking(16):m40GBaseFX(17):m10000BaseTX(18):m2500BaseTX(19),The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14).16Gbits per second fiber. m40GStacking(16). 40Gbits per second fiber. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoTagMode,INTEGER,read-write,,deprecated,tagged(1):untagged(2):auto(3):disabled(4),For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoChnMode,INTEGER,read-write,,deprecated,none(0):halfDuplex(1):fullDuplex(2),The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). +.1.3.6.1.4.1.1991.1.1.3.3.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed,INTEGER,read-write,,deprecated,none(0):sAutoSense(1):s10M(2):s100M(3):s1G(4):s1GM(5):s155M(6):s10G(7):s622M(8):s2488M(9):s9953M(10):s16G(11):s40G(13):s2500M(14):s5000M(15):s100G(16):s25G(17),The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)...........25Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)...........25Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). +.1.3.6.1.4.1.1991.1.1.3.3.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoMediaType,INTEGER,read-only,,deprecated,other(1):m100BaseTX(2):m100BaseFX(3):m1000BaseFX(4):mT3(5):m155ATM(6):m1000BaseTX(7):m622ATM(8):m155POS(9):m622POS(10):m2488POS(11):m10000BaseFX(12):m9953POS(13):m16GStacking(14):m40GStacking(16):m2500BaseTX(19):m100GBaseTX(20):mMultiGigBZ(21):m40GBaseTX(22):m25GBaseFX(23),The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14).16Gbits per second fiber. m40GStacking(16). 40Gbits (stacking) per second fiber. m2500BaseTX(19) 2.5Gbits per second fiber. m100GBaseTX(20)...100Gbits per second fiber. mMultiGigBZ(21)......2.5G/5G/10G multiGig per seconnd fiber, m40GBaseTX(22)...40Gbits per second fiber. m25GBaseTX(23)...25Gbits per second fiber. .1.3.6.1.4.1.1991.1.1.3.3.1.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoConnectorType,INTEGER,read-only,,deprecated,other(1):copper(2):fiber(3),The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector type -.1.3.6.1.4.1.1991.1.1.3.3.1.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoAdminStatus,INTEGER,read-write,,deprecated,up(1):down(2):testing(3),The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) -.1.3.6.1.4.1.1991.1.1.3.3.1.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoLinkStatus,INTEGER,read-only,,deprecated,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) +.1.3.6.1.4.1.1991.1.1.3.3.1.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoAdminStatus,INTEGER,read-write,,deprecated,up(1):down(2):testing(3),The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) +.1.3.6.1.4.1.1991.1.1.3.3.1.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoLinkStatus,INTEGER,read-only,,deprecated,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) .1.3.6.1.4.1.1991.1.1.3.3.1.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoPortQos,INTEGER,read-write,,deprecated,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) -.1.3.6.1.4.1.1991.1.1.3.3.1.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoPhysAddress,OCTET,read-only,,deprecated,,The port physical address. The physical address represents the switch port. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoPhysAddress,OCTET,read-only,,deprecated,,The port physical address. The physical address represents the switch port. .1.3.6.1.4.1.1991.1.1.3.3.1.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsInFrames,Counter32,read-only,,deprecated,,The total number of packets received on the interface. .1.3.6.1.4.1.1991.1.1.3.3.1.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsOutFrames,Counter32,read-only,,deprecated,,The total number of packets transmitted out of the interface. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsAlignErrors,Counter32,read-only,,deprecated,,dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFCSErrors,Counter32,read-only,,deprecated,,dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsMultiColliFrames,Counter32,read-only,,deprecated,,dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooLongs,Counter32,read-only,,deprecated,,dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsAlignErrors,Counter32,read-only,,deprecated,,dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFCSErrors,Counter32,read-only,,deprecated,,dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsMultiColliFrames,Counter32,read-only,,deprecated,,dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooLongs,Counter32,read-only,,deprecated,,dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. .1.3.6.1.4.1.1991.1.1.3.3.1.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsTxColliFrames,Counter32,read-only,,deprecated,,A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisionFrames and dot3StatsMultipleCollisionFrames objects. .1.3.6.1.4.1.1991.1.1.3.3.1.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsRxColliFrames,Counter32,read-only,,deprecated,,A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwPortStatsTxColliFrames. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooShorts,Counter32,read-only,,deprecated,, A count of frames received on a particular interface that below the minimum permitted frame size. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooShorts,Counter32,read-only,,deprecated,, A count of frames received on a particular interface that below the minimum permitted frame size. .1.3.6.1.4.1.1991.1.1.3.3.1.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortLockAddressCount,INTEGER,read-write,,deprecated,,The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. DEFVAL { 8 } .1.3.6.1.4.1.1991.1.1.3.3.1.1.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStpPortEnable,INTEGER,read-write,,deprecated,disabled(0):enabled(1),The enabled/disabled status of the port. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortDhcpGateListId,INTEGER,read-write,,deprecated,,The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID +.1.3.6.1.4.1.1991.1.1.3.3.1.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortDhcpGateListId,INTEGER,read-write,,deprecated,,The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID .1.3.6.1.4.1.1991.1.1.3.3.1.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortName,OCTET,read-write,,deprecated,,Port Name string. .1.3.6.1.4.1.1991.1.1.3.3.1.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsInBcastFrames,Counter32,read-only,,deprecated,,The total number of broadcast packets received on the interface. .1.3.6.1.4.1.1991.1.1.3.3.1.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsOutBcastFrames,Counter32,read-only,,deprecated,,The total number of broadcast packets transmitted out of the interface. @@ -3785,7 +3748,7 @@ .1.3.6.1.4.1.1991.1.1.3.3.1.1.33,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortTransGroupId,Integer32,read-write,,deprecated,,Transparent Group ID for the interface. .1.3.6.1.4.1.1991.1.1.3.3.1.1.34,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoAutoNegotiate,INTEGER,read-write,,deprecated,disabled(0):enabled(1):negFullAuto(2):global(3):other(4),This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), the port will start with auto- negotiation, if the negotiation failed, then it will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If set to global(3), port negotiation mode follows the value of snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns the value other(4). DEFVAL { global } .1.3.6.1.4.1.1991.1.1.3.3.1.1.35,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoFlowControl,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Enable/Disbale port flow control. DEFVAL { enabled } -.1.3.6.1.4.1.1991.1.1.3.3.1.1.36,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoGigType,INTEGER,read-only,,deprecated,m1000BaseSX(0):m1000BaseLX(1):m1000BaseLH(2):m1000BaseLHA(3):m1000BaseLHB(4):m1000BaseTX(5):m10000BaseSR(6):m10000BaseLR(7):m10000BaseER(8):sfpCWDM1470nm80Km(9):sfpCWDM1490nm80Km(10):sfpCWDM1510nm80Km(11):sfpCWDM1530nm80Km(12):sfpCWDM1550nm80Km(13):sfpCWDM1570nm80Km(14):sfpCWDM1590nm80Km(15):sfpCWDM1610nm80Km(16):sfpCWDM1470nm100Km(17):sfpCWDM1490nm100Km(18):sfpCWDM1510nm100Km(19):sfpCWDM1530nm100Km(20):sfpCWDM1550nm100Km(21):sfpCWDM1570nm100Km(22):sfpCWDM1590nm100Km(23):sfpCWDM1610nm100Km(24):m1000BaseLHX(25):m1000BaseSX2(26):m1000BaseGBXU(27):m1000BaseGBXD(28):notApplicable(255),The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m2500BaseTX(50)...2.5GBASE fiber. notApplicable(255)....a non-gigabit port. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.36,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoGigType,INTEGER,read-only,,deprecated,m1000BaseSX(0):m1000BaseLX(1):m1000BaseLH(2):m1000BaseLHA(3):m1000BaseLHB(4):m1000BaseTX(5):m10000BaseSR(6):m10000BaseLR(7):m10000BaseER(8):sfpCWDM1470nm80Km(9):sfpCWDM1490nm80Km(10):sfpCWDM1510nm80Km(11):sfpCWDM1530nm80Km(12):sfpCWDM1550nm80Km(13):sfpCWDM1570nm80Km(14):sfpCWDM1590nm80Km(15):sfpCWDM1610nm80Km(16):sfpCWDM1470nm100Km(17):sfpCWDM1490nm100Km(18):sfpCWDM1510nm100Km(19):sfpCWDM1530nm100Km(20):sfpCWDM1550nm100Km(21):sfpCWDM1570nm100Km(22):sfpCWDM1590nm100Km(23):sfpCWDM1610nm100Km(24):m1000BaseLHX(25):m1000BaseSX2(26):m1000BaseGBXU(27):m1000BaseGBXD(28):m2500BaseTX(50):m100GBaseTX(51):mMultiGigBZ(52):m40GBaseTX(53):m25GBaseFX(54):notApplicable(255),The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m2500BaseTX(50)...2.5GBASE fiber. m100GBaseTX(51) ..100G base fiber MultiGigBZ(52) .. 2.5G/5G/10G base fiber m40GBaseTX(53) .. 40G base fiber m25GBaseFX(54) .. 25G base fiber notApplicable(255)....a non-gigabit port. .1.3.6.1.4.1.1991.1.1.3.3.1.1.37,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortStatsLinkChange,Counter32,read-only,,deprecated,,The total number of link state change of the interface. .1.3.6.1.4.1.1991.1.1.3.3.1.1.38,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortIfIndex,Integer32,read-only,,deprecated,,In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. .1.3.6.1.4.1.1991.1.1.3.3.1.1.39,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortDescr,OCTET,read-only,,deprecated,,A textual string containing the slot/port information about the interface. @@ -3808,7 +3771,7 @@ .1.3.6.1.4.1.1991.1.1.3.3.1.1.56,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortLoadInterval,INTEGER,read-write,,deprecated,,The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. DEFVAL { 300 } .1.3.6.1.4.1.1991.1.1.3.3.1.1.57,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortTagType,Integer32,read-write,,deprecated,,The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. DEFVAL { 33024 } .1.3.6.1.4.1.1991.1.1.3.3.1.1.58,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInLinePowerControl,INTEGER,read-write,,deprecated,other(1):disable(2):enable(3):enableLegacyDevice(4),Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'. -.1.3.6.1.4.1.1991.1.1.3.3.1.1.59,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInLinePowerWattage,Integer32,read-write,,deprecated,,Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. +.1.3.6.1.4.1.1991.1.1.3.3.1.1.59,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInLinePowerWattage,Integer32,read-write,,deprecated,,Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. .1.3.6.1.4.1.1991.1.1.3.3.1.1.60,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInLinePowerClass,INTEGER,read-write,,deprecated,,Adjust the inline power class. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value. .1.3.6.1.4.1.1991.1.1.3.3.1.1.61,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInLinePowerPriority,INTEGER,read-write,,deprecated,invalid(0):critical(1):high(2):low(3):medium(4):other(5),Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other. .1.3.6.1.4.1.1991.1.1.3.3.1.1.62,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoMirrorMode,INTEGER,read-write,,deprecated,disable(0):enable(1),Enable/disable mirror on this port. @@ -3838,45 +3801,45 @@ .1.3.6.1.4.1.1991.1.1.3.3.4.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfIndexLookupEntry,,not-accessible,snIfIndexLookupIfIndex,current,, .1.3.6.1.4.1.1991.1.1.3.3.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfIndexLookupIfIndex,Integer32,read-only,,current,, .1.3.6.1.4.1.1991.1.1.3.3.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfIndexLookupInterfaceId,OBJECT,read-only,,current,, -.1.3.6.1.4.1.1991.1.1.3.3.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoTable,,not-accessible,,current,,A specific snSwIfInfo group consists of a number of switch ports. -.1.3.6.1.4.1.1991.1.1.3.3.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoEntry,,not-accessible,snSwIfInfoPortNum,current,,An entry in the snSwIfInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwIfInfoTable requires the entire sequence of the MIB Objects in each snSwIfInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned. +.1.3.6.1.4.1.1991.1.1.3.3.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoTable,,not-accessible,,current,,A specific snSwIfInfo group consists of a number of switch ports. +.1.3.6.1.4.1.1991.1.1.3.3.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoEntry,,not-accessible,snSwIfInfoPortNum,current,,An entry in the snSwIfInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwIfInfoTable requires the entire sequence of the MIB Objects in each snSwIfInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned. .1.3.6.1.4.1.1991.1.1.3.3.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoPortNum,Integer32,read-only,,current,,The port/interface index (ifindex). -.1.3.6.1.4.1.1991.1.1.3.3.5.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMonitorMode,INTEGER,read-write,,deprecated,disabled(0):input(1):output(2):both(3),For FastIron platforms, this object is DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable. For NetIron platforms, this object is DEPRECATED by snPortMonitorTable. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMonitorMode,INTEGER,read-write,,deprecated,disabled(0):input(1):output(2):both(3),DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable. .1.3.6.1.4.1.1991.1.1.3.3.5.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMirrorPorts,OCTET,read-write,,current,,The list of port/interface index (ifindex), which mirror this interface, when monitoring is enabled. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoTagMode,INTEGER,read-write,,current,tagged(1):untagged(2):dual(3),For tagged/dual port, we could have multiple VLANs per port. For untagged port, there is only one VLAN ID per port, dual mode is associated with a vlan id 'snSwIfVlanId', dual mode with snSwIfVlanId zero disables the dual mode. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoTagMode,INTEGER,read-write,,current,tagged(1):untagged(2):dual(3),Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-default VLAN. Configure an interface as untagged member of non-default VLAN, that interface will be moved from default VLAN to the configured VLAN. Dual(3) mode no longer be needed, this option will be will be deprecated. All tagged interfaces are implicit dual-mode ports. .1.3.6.1.4.1.1991.1.1.3.3.5.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoTagType,Integer32,read-write,,current,,The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value. DEFVAL { 33024 } -.1.3.6.1.4.1.1991.1.1.3.3.5.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoChnMode,INTEGER,read-write,,current,none(0):halfDuplex(1):fullDuplex(2),The port can be configured to operate in either half or full duplex mode. The values are: none(0) is not used. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). -.1.3.6.1.4.1.1991.1.1.3.3.5.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoSpeed,INTEGER,read-write,,current,none(0):sAutoSense(1):s10M(2):s100M(3):s1G(4):s1GM(5):s155M(6):s10G(7):s622M(8):s2488M(9):s9953M(10):s16G(11):s100G(12):s40G(13):s2500M(14),The speed configuration for a port. The values are: none(0)..........not used. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). -.1.3.6.1.4.1.1991.1.1.3.3.5.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMediaType,INTEGER,read-only,,current,other(1):m100BaseTX(2):m100BaseFX(3):m1000BaseFX(4):mT3(5):m155ATM(6):m1000BaseTX(7):m622ATM(8):m155POS(9):m622POS(10):m2488POS(11):m10000BaseFX(12):m9953POS(13):m16GStacking(14):m100GBaseFX(15):m40GStacking(16):m40GBaseFX(17):m10000BaseTX(18):m2500BaseTX(19),The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14)...16Gbits per second fiber. m40GStacking(16). 40Gbits per second fiber. m40GBaseFX(17)....40Gbits per second fiber. m10000BaseTX(18)..10Gbits per second copper. m2500BaseTX(19). 2.5Gbits per second fiber. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoConnectorType,INTEGER,read-only,,current,other(1):copper(2):fiber(3):both(4),The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector both(4)............Supports both Copper and Fiber This describes the physical connector type -.1.3.6.1.4.1.1991.1.1.3.3.5.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoAdminStatus,INTEGER,read-write,,current,up(1):down(2):testing(3),The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) -.1.3.6.1.4.1.1991.1.1.3.3.5.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLinkStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) +.1.3.6.1.4.1.1991.1.1.3.3.5.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoChnMode,INTEGER,read-write,,current,none(0):halfDuplex(1):fullDuplex(2),The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). +.1.3.6.1.4.1.1991.1.1.3.3.5.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoSpeed,INTEGER,read-write,,current,none(0):sAutoSense(1):s10M(2):s100M(3):s1G(4):s1GM(5):s155M(6):s10G(7):s622M(8):s2488M(9):s9953M(10):s16G(11):sOpticBased(12):s40G(13):s2500M(14):s5000M(15):s100G(16):s25G(17),The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. sOpticBased(12).....Optic-based s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)............25Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. s5000M(15)..........5Gbits per second. s100G(16)...........100Gbits per second. s25G(17)............25Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device). +.1.3.6.1.4.1.1991.1.1.3.3.5.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMediaType,INTEGER,read-only,,current,other(1):m100BaseTX(2):m100BaseFX(3):m1000BaseFX(4):mT3(5):m155ATM(6):m1000BaseTX(7):m622ATM(8):m155POS(9):m622POS(10):m2488POS(11):m10000BaseFX(12):m9953POS(13):m16GStacking(14):m40GStacking(16):m2500BaseTX(19):m100GBaseTX(20):mMultiGigBZ(21):m40GBaseTX(22):m25GBaseFX(23),The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14)...16Gbits per second fiber. m40GStacking(16). 40Gbits (stacking) per second fiber. m2500BaseTX(19). 2.5Gbits per second fiber. m100GBaseTX(20)...100Gbits per second fiber. mMultiGigBZ(21)......2.5G/5G/10G multiGig per seconnd fiber. m40GBaseTX(22)...40 Gbits per second fiber. m25GBaseFX(23)...25 Gbits per second fiber +.1.3.6.1.4.1.1991.1.1.3.3.5.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoConnectorType,INTEGER,read-only,,current,other(1):copper(2):fiber(3),The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector type +.1.3.6.1.4.1.1991.1.1.3.3.5.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoAdminStatus,INTEGER,read-write,,current,up(1):down(2):testing(3),The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) +.1.3.6.1.4.1.1991.1.1.3.3.5.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLinkStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) .1.3.6.1.4.1.1991.1.1.3.3.5.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoPortQos,INTEGER,read-write,,current,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) -.1.3.6.1.4.1.1991.1.1.3.3.5.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoPhysAddress,OCTET,read-only,,current,,The port physical address. The physical address represents the switch port. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoPhysAddress,OCTET,read-only,,current,,The port physical address. The physical address represents the switch port. .1.3.6.1.4.1.1991.1.1.3.3.5.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfLockAddressCount,INTEGER,read-write,,current,,The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. DEFVAL { 8 } .1.3.6.1.4.1.1991.1.1.3.3.5.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStpPortEnable,INTEGER,read-write,,current,disabled(0):enabled(1),The enabled/disabled status of the port. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfDhcpGateListId,INTEGER,read-write,,current,,The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID +.1.3.6.1.4.1.1991.1.1.3.3.5.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfDhcpGateListId,INTEGER,read-write,,current,,The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID .1.3.6.1.4.1.1991.1.1.3.3.5.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfName,OCTET,read-write,,current,,Port Name string. .1.3.6.1.4.1.1991.1.1.3.3.5.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfDescr,OCTET,read-only,,current,,A textual string containing the slot/port information about the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoAutoNegotiate,INTEGER,read-write,,current,disabled(0):enabled(1):negFullAuto(2):global(3):other(4),This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), the port will start with auto- negotiation, if the negotiation failed, then it will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If set to global(3), port negotiation mode follows the value of snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns the value other(4). DEFVAL { global } .1.3.6.1.4.1.1991.1.1.3.3.5.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoFlowControl,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disbale port flow control. DEFVAL { enabled } -.1.3.6.1.4.1.1991.1.1.3.3.5.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoGigType,INTEGER,read-only,,current,m1000BaseSX(0):m1000BaseLX(1):m1000BaseLH(2):m1000BaseLHA(3):m1000BaseLHB(4):m1000BaseTX(5):m10000BaseSR(6):m10000BaseLR(7):m10000BaseER(8):sfpCWDM1470nm80Km(9):sfpCWDM1490nm80Km(10):sfpCWDM1510nm80Km(11):sfpCWDM1530nm80Km(12):sfpCWDM1550nm80Km(13):sfpCWDM1570nm80Km(14):sfpCWDM1590nm80Km(15):sfpCWDM1610nm80Km(16):sfpCWDM1470nm100Km(17):sfpCWDM1490nm100Km(18):sfpCWDM1510nm100Km(19):sfpCWDM1530nm100Km(20):sfpCWDM1550nm100Km(21):sfpCWDM1570nm100Km(22):sfpCWDM1590nm100Km(23):sfpCWDM1610nm100Km(24):m1000BaseLHX(25):m1000BaseSX2(26):mSFP1000BaseBXU(27):mSFP1000BaseBXD(28):mSFP100BaseBX(29):mSFP100BaseBXU(30):mSFP100BaseBXD(31):mSFP100BaseFX(32):mSFP100BaseFXIR(33):mSFP100BaseFXLR(34):m1000BaseLMC(35):mXFP10000BaseSR(36):mXFP10000BaseLR(37):mXFP10000BaseER(38):mXFP10000BaseSW(39):mXFP10000BaseLW(40):mXFP10000BaseEW(41):mXFP10000BaseCX4(42):mXFP10000BaseZR(43):mXFP10000BaseZRD(44):m1000BaseC6553(45):mXFP10000BaseSRSW(46):mXFP10000BaseLRLW(47):mXFP10000BaseEREW(48):m10000BaseT(49):m2500BaseTX(50):m1000BaseGBXU(127):m1000BaseGBXD(128):m1000BaseFBX(129):m1000BaseFBXU(130):m1000BaseFBXD(131):m1000BaseFX(132):m1000BaseFXIR(133):m1000BaseFXLR(134):m1000BaseXGSR(136):m1000BaseXGLR(137):m1000BaseXGER(138):m1000BaseXGSW(139):m1000BaseXGLW(140):m1000BaseXGEW(141):m1000BaseXGCX4(142):m1000BaseXGZR(143):m1000BaseXGZRD(144):mCFP100GBaseSR10(145):mCFP100GBaseLR4(146):mCFP100GBaseER4(147):mCFP100GBase10x10g2Km(148):mCFP100GBase10x10g10Km(149):qSFP40000BaseSR4(150):qSFP40000Base10KmLR4(151):mXFP10000BaseUSR(152):mXFP10000BaseTwinax(153):mCFP2-100GBaseSR10(154):mCFP2-100GBaseLR4(155):mCFP2-100GBaseER4(156):mCFP2-100GBase10x10g2Km(157):mCFP2-100GBase10x10g10Km(158):notApplicable(255),The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseLMC(35)...Link Media Copper. mXFP10000BaseSR(36)...10GBASE fiber, 850nm serial pluggable XFP optic (LC), target range 300m over MMF. mXFP10000BaseLR(37)...10GBASE fiber, 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF. mXFP10000BaseER(38)...10GBASE fiber, 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF. mXFP10000BaseSW(39)...not used. mXFP10000BaseLW(40)...not used. mXFP10000BaseEW(41)...not used mXFP10000BaseCX4(42)...10GBASE-CX4, XFP module,15m, CX4 connector. mXFP10000BaseZR(43)...1550nm serial pluggable XFP optic (LC) for up to 80km over SMF. mXFP10000BaseZRD(44)...10GBASE-ZR DWDM, XFP optic, 80km. mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36) mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37) mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38). m10000BaseT(49)...10GBASE fiber. m2500BaseTX(50)...2.5GBASE fiber. mCFP100GBaseSR10(145)... 100GbE CFP optic (MPO 2x12), SR10, for distances up to 100m over MMF. mCFP100GBaseLR4(146)... 100GbE CFP optic (SC), LR4, for distances up to 10 km over SMF. mCFP100GBaseER4(147)... 100GbE CFP optic, ER4, for distances up to 40 km over SMF. mCFP100GBase10x10g2Km(148)... 100GbE CFP optic (LC), 10x10, for distances up to 2 km over SMF. mCFP100GBase10x10g10Km(149)... 100GbE CFP optic (LC), 10x10, for distances up to 10 km over SMF. mXFP10000BaseUSR(152)... 10 Gbps Ultra-Short Range (USR) 100m Ethernet optical transceiver. mXFP10000BaseTwinax(153)... +.1.3.6.1.4.1.1991.1.1.3.3.5.1.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoGigType,INTEGER,read-only,,current,m1000BaseSX(0):m1000BaseLX(1):m1000BaseLH(2):m1000BaseLHA(3):m1000BaseLHB(4):m1000BaseTX(5):m10000BaseSR(6):m10000BaseLR(7):m10000BaseER(8):sfpCWDM1470nm80Km(9):sfpCWDM1490nm80Km(10):sfpCWDM1510nm80Km(11):sfpCWDM1530nm80Km(12):sfpCWDM1550nm80Km(13):sfpCWDM1570nm80Km(14):sfpCWDM1590nm80Km(15):sfpCWDM1610nm80Km(16):sfpCWDM1470nm100Km(17):sfpCWDM1490nm100Km(18):sfpCWDM1510nm100Km(19):sfpCWDM1530nm100Km(20):sfpCWDM1550nm100Km(21):sfpCWDM1570nm100Km(22):sfpCWDM1590nm100Km(23):sfpCWDM1610nm100Km(24):m1000BaseLHX(25):m1000BaseSX2(26):mSFP1000BaseBXU(27):mSFP1000BaseBXD(28):mSFP100BaseBX(29):mSFP100BaseBXU(30):mSFP100BaseBXD(31):mSFP100BaseFX(32):mSFP100BaseFXIR(33):mSFP100BaseFXLR(34):m1000BaseLMC(35):mXFP10000BaseSR(36):mXFP10000BaseLR(37):mXFP10000BaseER(38):mXFP10000BaseSW(39):mXFP10000BaseLW(40):mXFP10000BaseEW(41):mXFP10000BaseCX4(42):mXFP10000BaseZR(43):mXFP10000BaseZRD(44):m1000BaseC6553(45):mXFP10000BaseSRSW(46):mXFP10000BaseLRLW(47):mXFP10000BaseEREW(48):m10000BaseT(49):m2500BaseTX(50):m100GBaseTX(51):mMultiGigBZ(52):m40GBaseTX(53):m25GBaseFX(54):m1000BaseGBXU(127):m1000BaseGBXD(128):m1000BaseFBX(129):m1000BaseFBXU(130):m1000BaseFBXD(131):m1000BaseFX(132):m1000BaseFXIR(133):m1000BaseFXLR(134):m1000BaseXGSR(136):m1000BaseXGLR(137):m1000BaseXGER(138):m1000BaseXGSW(139):m1000BaseXGLW(140):m1000BaseXGEW(141):m1000BaseXGCX4(142):m1000BaseXGZR(143):m1000BaseXGZRD(144):notApplicable(255),The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseLMC(35)...Link Media Copper. mXFP10000BaseSR(36)...10GBASE fiber, 850nm serial pluggable XFP optic (LC), target range 300m over MMF. mXFP10000BaseLR(37)...10GBASE fiber, 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF. mXFP10000BaseER(38)...10GBASE fiber, 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF. mXFP10000BaseSW(39)...not used. mXFP10000BaseLW(40)...not used. mXFP10000BaseEW(41)...not used mXFP10000BaseCX4(42)...10GBASE-CX4, XFP module,15m, CX4 connector. mXFP10000BaseZR(43)...1550nm serial pluggable XFP optic (LC) for up to 80km over SMF. mXFP10000BaseZRD(44)...10GBASE-ZR DWDM, XFP optic, 80km. mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36) mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37) mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38). m10000BaseT(49))...10GBASE fiber. m2500BaseTX(50)...2.5GBASE fiber. m100GBaseTX(51)...100GBASE fiber. mMultiGigBZ(52)...2.5/5/10 multiGig fiber. m40GBaseTX(53)...40GBASE fiber. m25GBaseFX(54)...25GBASE fiber. notApplicable(255)....a non-gigabit port. .1.3.6.1.4.1.1991.1.1.3.3.5.1.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfFastSpanPortEnable,INTEGER,read-write,,current,disabled(0):enabled(1),The enabled/disabled fast span port status of the port. .1.3.6.1.4.1.1991.1.1.3.3.5.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfFastSpanUplinkEnable,INTEGER,read-write,,current,disabled(0):enabled(1),The enabled/disabled fast span uplink status of the port. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfVlanId,INTEGER,read-write,,current,,The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value, reading is valid only for untagged and dual mode, writing is valid for only dual mode. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfVlanId,INTEGER,read-only,,deprecated,,This object return 0 due to no support for this object from FI 08.0.80 release. Write operation not-supported for this object. .1.3.6.1.4.1.1991.1.1.3.3.5.1.25,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfRouteOnly,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts the routing switch to perform routing only. For a L2 switching only product, reading this object always return 'disabled', writing 'enabled' to this object takes no effect. DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.3.3.5.1.26,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfPresent,INTEGER,read-only,,current,false(0):true(1),Indicate if the port is absent or present. This object only valid for M4 module. .1.3.6.1.4.1.1991.1.1.3.3.5.1.27,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfGBICStatus,INTEGER,read-only,,current,gbic(1):miniGBIC(2):empty(3):other(4),Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it means that the GBIC is missing. Value other(4) means that the port not a removable gig port. .1.3.6.1.4.1.1991.1.1.3.3.5.1.28,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfLoadInterval,INTEGER,read-write,,current,,The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. DEFVAL { 300 } .1.3.6.1.4.1.1991.1.1.3.3.5.1.29,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsInFrames,Counter32,read-only,,current,,The total number of packets received on the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.30,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsOutFrames,Counter32,read-only,,current,,The total number of packets transmitted out of the interface. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.31,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsAlignErrors,Counter32,read-only,,current,,dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.32,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFCSErrors,Counter32,read-only,,current,,dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.33,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsMultiColliFrames,Counter32,read-only,,current,,dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.31,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsAlignErrors,Counter32,read-only,,current,,dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.32,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFCSErrors,Counter32,read-only,,current,,dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.33,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsMultiColliFrames,Counter32,read-only,,current,,dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. .1.3.6.1.4.1.1991.1.1.3.3.5.1.34,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsTxColliFrames,Counter32,read-only,,current,,A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisionFrames and dot3StatsMultipleCollisionFrames objects. .1.3.6.1.4.1.1991.1.1.3.3.5.1.35,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsRxColliFrames,Counter32,read-only,,current,,A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwIfStatsTxColliFrames. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.36,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFrameTooLongs,Counter32,read-only,,current,,dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.37,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFrameTooShorts,Counter32,read-only,,current,, A count of frames received on a particular interface that below the minimum permitted frame size. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.36,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFrameTooLongs,Counter32,read-only,,current,,dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.37,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsFrameTooShorts,Counter32,read-only,,current,, A count of frames received on a particular interface that below the minimum permitted frame size. .1.3.6.1.4.1.1991.1.1.3.3.5.1.38,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsInBcastFrames,Counter32,read-only,,current,,The total number of broadcast packets received on the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.39,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsOutBcastFrames,Counter32,read-only,,current,,The total number of broadcast packets transmitted out of the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.40,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsInMcastFrames,Counter32,read-only,,current,,The total number of multicast packets received on the interface. @@ -3898,16 +3861,25 @@ .1.3.6.1.4.1.1991.1.1.3.3.5.1.56,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsInJumboFrames,Counter64,read-only,,current,,The total number of jumbo packets received on the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.57,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStatsOutJumboFrames,Counter64,read-only,,current,,The total number of jumbo packets transmitted out of the interface. .1.3.6.1.4.1.1991.1.1.3.3.5.1.58,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoMirrorMode,INTEGER,read-write,,current,disable(0):enable(1),Enable/disable mirror on this port. -.1.3.6.1.4.1.1991.1.1.3.3.5.1.59,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfMacLearningDisable,INTEGER,read-write,,current,true(1):false(2),The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error. DEFVAL { false } -.1.3.6.1.4.1.1991.1.1.3.3.5.1.60,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoL2FowardEnable,INTEGER,read-write,,current,enabled(1):disabled(2):globalConfig(3),The status of cluster L2 forward feature on an ethernet port. When this object is set to disable, the STP protocol packets coming on the MCT VLANs are dropped. The snSwIfInfoL2FowardEnable has more preference than brcdMctL2Forward for this interface when set with enable(1) or disable(2). When set to globalConfig(3) the status of brcdMctL2Forward object applies for this interface. DEFVAL { globalConfig } -.1.3.6.1.4.1.1991.1.1.3.3.5.1.61,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoAllowAllVlan,INTEGER,read-write,,current,true(1):false(2),Specifies allowing all vlan packets for pbr DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.59,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfMacLearningDisable,INTEGER,read-write,,deprecated,true(1):false(2),The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error. DEFVAL { false } .1.3.6.1.4.1.1991.1.1.3.3.5.1.62,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoNativeMacAddress,OCTET,read-only,,current,,The port native MAC address. The native MAC address represents the switch port. +.1.3.6.1.4.1.1991.1.1.3.3.5.1.63,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfQosMonitorDropCounterMode,INTEGER,read-write,,current,disable(0):enable(1),Enable/disable monitoring egress drop counter on this port. ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. Only when the port is selected, these drop counters can be monitored and included in the total egress drop for the port. Please note that only one port can be selected in a unit. This object is only applied to ICX7150 platform, and is enabled by default on other FI platforms +.1.3.6.1.4.1.1991.1.1.3.3.5.1.64,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfLRMAdapterPresent,INTEGER,read-only,,current,true(1):false(2),To display the state for Long Reach Module (LRM) adapter is presented on this port. Some FastIron ICX devices support LRM optics on 10G fiber ports. LRM adapter (Fluffy) is used to support LRM optics on those switch ports. false: the port is not connected to LRM adapter true: the port is connected to LRM adapter The default is false state DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.65,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStpBPDUGuardMode,INTEGER,read-write,,current,true(1):false(2),The status of the spanning tree BPDU guard on an ethernet port. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.66,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfStpRootGuardMode,INTEGER,read-write,,current,true(1):false(2),The status of the spanning tree root guard on an ethernet port. Declare the port to be on root guard for all spanning trees. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.67,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfRstpAdminEdgePortMode,INTEGER,read-write,,current,true(1):false(2),The status of the rapid spanning tree admin edge port on an ethernet port. Declare the port to be an operational edge for all vlans. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.68,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoClockMode,INTEGER,read-write,,current,none(0):master(1):slave(2):auto(3),The port can be configured to operate in either master or slave mode. The values are: none(0).........no configured or no support for clock mode, like fiber ports. master(1).......master mode slave(2)........slave mode auto(3)........auto mode, this is the default value for copper ports +.1.3.6.1.4.1.1991.1.1.3.3.5.1.69,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfProtectedMode,INTEGER,read-write,,current,true(1):false(2),Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.70,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfTrustDscpMode,INTEGER,read-write,,current,true(1):false(2),The status of Trust DSCP on an ethernet port. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.71,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfVoiceVlanId,Integer32,read-write,,current,,VLAN can be configurated as a voice over IP VLAN on an ethernet port. The valid range of voice VLAN ID is 1-4095. The value 0 means that the voice VLAN is not configurated or is not applicable +.1.3.6.1.4.1.1991.1.1.3.3.5.1.72,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfPortLoopDetectionMode,INTEGER,read-write,,current,true(1):false(2),Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. There are 2 modes to this feature. Strict Mode (Per Port) and Loose Mode (Per VLAN). This object focusses on the Strict Mode, where a loop is detected if a test packet is received on the same port on which it was sent. The default is false state. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.5.1.73,FOUNDRY-SN-SWITCH-GROUP-MIB::snSWIfErrDisableStatus,INTEGER,read-only,,current,not-error-disable(0):bpdu-guard(1):loop-detection(2):invalid-licence(3):packet-inerror(4):loam-remote-critical-error(5):needs-reboot(6):bcast-threshold-exceed(7):mcast-threshold-exceed(8):dlf-threshold-exceed(9):stack-port-problem(10):spx-invalid-topo(11):pvst-protect(12):bpdu-tunnel-threshold-exceed(13):lag-oper-speed-mismatch(14):cause-counter(15),The port's error disable status. The values are: not-error-disable(0).........the port is not under error disable state. bpdu-guard(1).......ERRDISABLE_BPDUGUARD loop-detection(2)........ERRDISABLE_LOOP_DETECTION invalid-licence(3)........ERRDISABLE_INVALID_LICENSE packet-inerror(4)........ERRDISABLE_PACKET_INERROR loam-remote-critical-error(5).......ERRDISABLE_LOAM_REM_CRITICAL_EVENT needs-reboot(6)........ERRDISABLE_NEEDS_REBOOT bcast-threshold-exceed(7).......ERRDISABLE_BCAST_THRESHOLD_EXCEEDED mcast-threshold-exceed(8)........ERRDISABLE_MCAST_THRESHOLD_EXCEEDED dlf-threshold-exceed(9).........ERRDISABLE_UNKNOWN_UCAST_THRESHOLD_EXCEEDED stack-port-problem(10).......ERRDISABLE_STK_PORT_PROBLEM spx-invalid-topo(11)........ERRDISABLE_SPX_INVALID_TOPO pvst-protect(12)........ERRDISABLE_PVST_PROTECT bpdu-tunnel-threshold-exceed(13)........ERRDISABLE_BPDU_TUN_THRESHOLD_EXCEEDED lag-oper-speed-mismatch(14).......ERRDISABLE_LAG_OPER_SPEED_MISMATCH cause-counter(15)........ERRDISABLE_CAUSE_CNT, this is not a valid reason, just the reason counter .1.3.6.1.4.1.1991.1.1.3.3.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringInfoTable,,not-accessible,,current,,This table lists the instrumented parameters of all optical interfaces. .1.3.6.1.4.1.1991.1.1.3.3.6.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringInfoEntry,,not-accessible,ifIndex,current,,Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. -.1.3.6.1.4.1.1991.1.1.3.3.6.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTemperature,OCTET,read-only,,current,,This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. For 100G LR4 and LR10 optic, this returns the average temperature for all lanes. -.1.3.6.1.4.1.1991.1.1.3.3.6.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTxPower,OCTET,read-only,,current,,This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. For 100G LR4 and LR10 optic, this returns the aggregated Tx Power for all lanes. -.1.3.6.1.4.1.1991.1.1.3.3.6.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringRxPower,OCTET,read-only,,current,,This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. For 100G LR4 and LR10 optic, this returns the aggregated Rx Power for all lanes. -.1.3.6.1.4.1.1991.1.1.3.3.6.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTxBiasCurrent,OCTET,read-only,,current,,Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. For 100G LR4 and LR10 optic, this returns the aggregated Tx Bias Current for all lanes. +.1.3.6.1.4.1.1991.1.1.3.3.6.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTemperature,OCTET,read-only,,current,,This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. +.1.3.6.1.4.1.1991.1.1.3.3.6.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTxPower,OCTET,read-only,,current,,This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. +.1.3.6.1.4.1.1991.1.1.3.3.6.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringRxPower,OCTET,read-only,,current,,This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. +.1.3.6.1.4.1.1991.1.1.3.3.6.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalMonitoringTxBiasCurrent,OCTET,read-only,,current,,Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. .1.3.6.1.4.1.1991.1.1.3.3.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snInterfaceLookup2Table,,not-accessible,,current,, .1.3.6.1.4.1.1991.1.1.3.3.7.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snInterfaceLookup2Entry,,not-accessible,snInterfaceLookup2InterfaceId,current,, .1.3.6.1.4.1.1991.1.1.3.3.7.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snInterfaceLookup2InterfaceId,OBJECT,not-accessible,,current,, @@ -3917,44 +3889,54 @@ .1.3.6.1.4.1.1991.1.1.3.3.8.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfIndexLookup2IfIndex,Integer32,not-accessible,,current,, .1.3.6.1.4.1.1991.1.1.3.3.8.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfIndexLookup2InterfaceId,OBJECT,read-only,,current,, .1.3.6.1.4.1.1991.1.1.3.3.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaInfoTable,,not-accessible,,current,,This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated with the operational cards will be included in this table. -.1.3.6.1.4.1.1991.1.1.3.3.9.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaInfoEntry,,not-accessible,ifIndex,current,,An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table. +.1.3.6.1.4.1.1991.1.1.3.3.9.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaInfoEntry,,not-accessible,ifIndex,current,,An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table. .1.3.6.1.4.1.1991.1.1.3.3.9.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaType,OCTET,read-only,,current,,The type of the media installed in the physical port. .1.3.6.1.4.1.1991.1.1.3.3.9.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaVendorName,OCTET,read-only,,current,,The media vendor name, full name of the corporation. .1.3.6.1.4.1.1991.1.1.3.3.9.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaVersion,OCTET,read-only,,current,,The media vendor product version number. .1.3.6.1.4.1.1991.1.1.3.3.9.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaPartNumber,OCTET,read-only,,current,,The media vendor part number. .1.3.6.1.4.1.1991.1.1.3.3.9.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfMediaSerialNumber,OCTET,read-only,,current,,The vendor serial number of the media device. -.1.3.6.1.4.1.1991.1.1.3.3.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringTable,,not-accessible,,current,,This table lists the instrumented parameters of all lanes within a 40G Optic of type SR4 and LR4, 100G optic of type LR4 and LR10. LR4 and SR4 have 4 lanes per optic, LR10 has 10 lanes per optic. +.1.3.6.1.4.1.1991.1.1.3.3.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringTable,,not-accessible,,current,,This table lists the instrumented parameters of all lanes within a 100G optic of type LR4 and LR10. LR4 has 4 lanes per optic, LR10 has 10 lanes per optic. .1.3.6.1.4.1.1991.1.1.3.3.10.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringEntry,,not-accessible,ifIndex:snIfOpticalLaneMonitoringLane,current,,Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. -.1.3.6.1.4.1.1991.1.1.3.3.10.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringLane,Unsigned32,not-accessible,,current,,The lane number of this 40G or 100G optic. LR4 and SR4 have 4 lanes per optic. LR10 has 10 lanes per optic. +.1.3.6.1.4.1.1991.1.1.3.3.10.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringLane,Unsigned32,not-accessible,,current,,The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes. .1.3.6.1.4.1.1991.1.1.3.3.10.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringTemperature,OCTET,read-only,,current,,This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. .1.3.6.1.4.1.1991.1.1.3.3.10.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringTxPower,OCTET,read-only,,current,,This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. .1.3.6.1.4.1.1991.1.1.3.3.10.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringRxPower,OCTET,read-only,,current,,This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. .1.3.6.1.4.1.1991.1.1.3.3.10.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringTxBiasCurrent,OCTET,read-only,,current,,Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. +.1.3.6.1.4.1.1991.1.1.3.3.10.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfOpticalLaneMonitoringVoltage,OCTET,read-only,,current,,This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy volts, followed by whether the measured value is normal, high/low alarm or high/low warning. .1.3.6.1.4.1.1991.1.1.3.3.11,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterInfoTable,,not-accessible,,current,,This table lists the information of egress counters of all the queues in the physical ports. .1.3.6.1.4.1.1991.1.1.3.3.11.1,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterInfoEntry,,not-accessible,brcdIfEgressCounterIfIndex:brcdIfEgressCounterQueueId,current,,An entry in the Interface Egress Counter Information table. The ifIndices of ethernet interfaces and the queue number will be used to index this table. .1.3.6.1.4.1.1991.1.1.3.3.11.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterIfIndex,Integer32,not-accessible,,current,,The port number of egress counter in the physical port. The port/interface index (ifindex). .1.3.6.1.4.1.1991.1.1.3.3.11.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterQueueId,INTEGER,not-accessible,,current,,The queue number of egress counter in the given port. -.1.3.6.1.4.1.1991.1.1.3.3.11.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterType,INTEGER,read-only,,current,other(1):unicast(2):multicast(3),The queue type of the egress counter in a given port. +.1.3.6.1.4.1.1991.1.1.3.3.11.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterType,INTEGER,read-only,,current,other(1):unicast(2):multicast(3):total(4),The queue type of the egress counter in a given port. .1.3.6.1.4.1.1991.1.1.3.3.11.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterPkts,Counter64,read-only,,current,,The egress packet counters of the queue in a given port. -.1.3.6.1.4.1.1991.1.1.3.3.11.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterDropPkts,Counter64,read-only,,current,,The egress dropped packet counters of the queue in a given port. +.1.3.6.1.4.1.1991.1.1.3.3.11.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::brcdIfEgressCounterDropPkts,Counter64,read-only,,current,,The egress dropped packet counters of the queue in a given port. ICX7150 platform has another set of queue drop counters which are displayed only when the port is monitored using the object, snSwIfQosMonitorDropCounterMode or CLI command. Without the above port selection, only a partial amount of the total drop counters may be displayed. +.1.3.6.1.4.1.1991.1.1.3.3.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitTable,,not-accessible,,current,,Rate limiting table for different types of traffic for a port. +.1.3.6.1.4.1.1991.1.1.3.3.12.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitEntry,,not-accessible,snSwIfInfoPortNum:snSwIfInfoLimitType,current,,An entry in the snSwIfInfoLimit table indicates the configuration on a specified port for rate limiting values. +.1.3.6.1.4.1.1991.1.1.3.3.12.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitType,INTEGER,read-write,,current,broadcast(1):multicast(2):unknown-unicast(3),The type of the limit, the values specified in this row applies for, which takes on values broadcast, multicast, unknown-unicast. +.1.3.6.1.4.1.1991.1.1.3.3.12.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitPkts,Unsigned32,read-write,,current,,Limit the number of packets to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.3.12.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitBits,Unsigned32,read-write,,current,,Limit the number of kilo bytes to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.3.12.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitThreshold,Unsigned32,read-write,,current,,The number of packets to be dropped when the rate limit is reached before taking the specified action like shutdown port. +.1.3.6.1.4.1.1991.1.1.3.3.12.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitShutdownTime,Unsigned32,read-write,,current,,Specifies the time the port should be in down state and this takes effect only if Threshold is configured. DEFVAL { 300 } +.1.3.6.1.4.1.1991.1.1.3.3.12.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitLog,INTEGER,read-write,,current,true(1):false(2),Enable or disable the logging of the rate limit occurances. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.3.12.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwIfInfoLimitRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Specifies whether to config or unconfig the limit on the ifindex, for the LimitType, which takes on values config or unconfig. .1.3.6.1.4.1.1991.1.1.3.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbInfo,,,,,, .1.3.6.1.4.1.1991.1.1.3.4.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbTable,,not-accessible,,current,,This table contains snFdb information for each station known to the system, one entry per station. .1.3.6.1.4.1.1991.1.1.3.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbEntry,,not-accessible,snFdbStationIndex,current,,Each entry represents the information of a static MAC station. .1.3.6.1.4.1.1991.1.1.3.4.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationIndex,INTEGER,read-only,,current,,The FDB Station index to the Fdb Station Table. -.1.3.6.1.4.1.1991.1.1.3.4.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationAddr,OCTET,read-write,,current,,The snFdbs physical address. The physical address represents a MAC Station. -.1.3.6.1.4.1.1991.1.1.3.4.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationPort,Integer32,read-write,,current,,Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). +.1.3.6.1.4.1.1991.1.1.3.4.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationAddr,OCTET,read-write,,current,,The snFdbs physical address. The physical address represents a MAC Station. +.1.3.6.1.4.1.1991.1.1.3.4.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationPort,Integer32,read-write,,deprecated,,Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). .1.3.6.1.4.1.1991.1.1.3.4.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbVLanId,INTEGER,read-write,,current,,The Station VLan ID. .1.3.6.1.4.1.1991.1.1.3.4.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationQos,INTEGER,read-write,,current,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable station Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch station Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) -.1.3.6.1.4.1.1991.1.1.3.4.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationType,INTEGER,read-write,,current,notSupported(0):host(1):router(2),The station type values are: notSupported -- a read value only : this product does not support MultiLayer Switching. host -- any MAC station. router -- a router-typed station. +.1.3.6.1.4.1.1991.1.1.3.4.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationType,INTEGER,read-write,,current,notSupported(0):host(1),The station type values are: notSupported -- a read value only : this product does not support MultiLayer Switching. host -- any MAC station. router -- a router-typed station. .1.3.6.1.4.1.1991.1.1.3.4.1.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.4.1.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdbStationIf,Integer32,read-write,,current,,Station interface index. .1.3.6.1.4.1.1991.1.1.3.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpInfo,,,,,, -.1.3.6.1.4.1.1991.1.1.3.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpTable,,not-accessible,,deprecated,,A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. -.1.3.6.1.4.1.1991.1.1.3.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpEntry,,not-accessible,snPortStpVLanId:snPortStpPortNum,deprecated,,An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of the MIB Objects in each snPortStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned. +.1.3.6.1.4.1.1991.1.1.3.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpTable,,not-accessible,,deprecated,,A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. +.1.3.6.1.4.1.1991.1.1.3.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpEntry,,not-accessible,snPortStpVLanId:snPortStpPortNum,deprecated,,An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of the MIB Objects in each snPortStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned. .1.3.6.1.4.1.1991.1.1.3.5.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpVLanId,INTEGER,read-only,,deprecated,,The VLAN ID of the VLAN switch community. -.1.3.6.1.4.1.1991.1.1.3.5.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortNum,Integer32,read-only,,deprecated,,The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). +.1.3.6.1.4.1.1991.1.1.3.5.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortNum,Integer32,read-only,,deprecated,,The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). .1.3.6.1.4.1.1991.1.1.3.5.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortPriority,INTEGER,read-write,,deprecated,,The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. -.1.3.6.1.4.1.1991.1.1.3.5.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPathCost,INTEGER,read-write,,deprecated,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress. +.1.3.6.1.4.1.1991.1.1.3.5.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPathCost,INTEGER,read-write,,deprecated,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress. .1.3.6.1.4.1.1991.1.1.3.5.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpOperState,INTEGER,read-only,,deprecated,notActivated(0):activated(1),By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP entry is activated and in running mode .1.3.6.1.4.1.1991.1.1.3.5.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortEnable,INTEGER,not-accessible,,deprecated,enabled(1):disabled(2),The enabled/disabled status of the port. .1.3.6.1.4.1.1991.1.1.3.5.1.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortForwardTransitions,Counter32,not-accessible,,deprecated,,The number of times this port has transitioned from the Learning state to the Forwarding state. @@ -3967,13 +3949,13 @@ .1.3.6.1.4.1.1991.1.1.3.5.1.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortProtocolMigration,INTEGER,read-write,,deprecated,true(1):false(2),When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read. .1.3.6.1.4.1.1991.1.1.3.5.1.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortAdminEdgePort,INTEGER,read-write,,deprecated,true(1):false(2),The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port. .1.3.6.1.4.1.1991.1.1.3.5.1.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortStpPortAdminPointToPoint,INTEGER,read-write,,deprecated,true(1):false(2),The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of FALSE(2) indicates that this port should be treated as having a shared media connection. -.1.3.6.1.4.1.1991.1.1.3.5.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpTable,,not-accessible,,current,,A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. -.1.3.6.1.4.1.1991.1.1.3.5.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpEntry,,not-accessible,snIfStpVLanId:snIfStpPortNum,current,,An entry in the snIfStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snIfStpTable requires the entired sequence of the MIB Objects in each snIfStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned. +.1.3.6.1.4.1.1991.1.1.3.5.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpTable,,not-accessible,,current,,A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN. +.1.3.6.1.4.1.1991.1.1.3.5.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpEntry,,not-accessible,snIfStpVLanId:snIfStpPortNum,current,,An entry in the snIfStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snIfStpTable requires the entired sequence of the MIB Objects in each snIfStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned. .1.3.6.1.4.1.1991.1.1.3.5.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpVLanId,INTEGER,read-only,,current,,The VLAN ID of the VLAN switch community. .1.3.6.1.4.1.1991.1.1.3.5.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortNum,Integer32,read-only,,current,,The port number of the Switch. It has the ifIndex value. .1.3.6.1.4.1.1991.1.1.3.5.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortPriority,INTEGER,read-write,,current,,The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. -.1.3.6.1.4.1.1991.1.1.3.5.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpCfgPathCost,INTEGER,read-write,,current,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. -.1.3.6.1.4.1.1991.1.1.3.5.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpOperState,INTEGER,read-only,,current,notActivated(0):activated(1),For FastIron: By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. activated(1)......the Port STP or RSTP entry is enabled. For NetIron: By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP entry is activated and in running mode +.1.3.6.1.4.1.1991.1.1.3.5.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpCfgPathCost,INTEGER,read-write,,current,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. +.1.3.6.1.4.1.1991.1.1.3.5.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpOperState,INTEGER,read-only,,current,notActivated(0):activated(1),By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. activated(1)......the Port STP or RSTP entry is enabled .1.3.6.1.4.1.1991.1.1.3.5.2.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortState,INTEGER,read-only,,current,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6):preforwarding(7),The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1). .1.3.6.1.4.1.1991.1.1.3.5.2.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortDesignatedCost,Integer32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. .1.3.6.1.4.1.1991.1.1.3.5.2.1.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortDesignatedRoot,OCTET,read-only,,current,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. @@ -3983,7 +3965,7 @@ .1.3.6.1.4.1.1991.1.1.3.5.2.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortProtocolMigration,INTEGER,read-write,,current,true(1):false(2),When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read. .1.3.6.1.4.1.1991.1.1.3.5.2.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortAdminEdgePort,INTEGER,read-write,,current,true(1):false(2),The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port. .1.3.6.1.4.1.1991.1.1.3.5.2.1.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortAdminPointToPoint,INTEGER,read-write,,current,true(1):false(2),The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of FALSE(2) indicates that this port should be treated as having a shared media connection. -.1.3.6.1.4.1.1991.1.1.3.5.2.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpOperPathCost,INTEGER,read-only,,current,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress or port link is down. +.1.3.6.1.4.1.1991.1.1.3.5.2.1.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpOperPathCost,INTEGER,read-only,,current,,dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress or port link is down. .1.3.6.1.4.1.1991.1.1.3.5.2.1.18,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpPortRole,INTEGER,read-only,,current,unknown(0):alternate(1):root(2):designated(3):backupRole(4):disabledRole(5),STP/RSTP port role. .1.3.6.1.4.1.1991.1.1.3.5.2.1.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpBPDUTransmitted,Counter32,read-only,,current,,STP/RSTP bridge protocol unit transmitted counter. .1.3.6.1.4.1.1991.1.1.3.5.2.1.20,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfStpBPDUReceived,Counter32,read-only,,current,,STP/RSTP bridge protocol unit received counter. @@ -3992,8 +3974,8 @@ .1.3.6.1.4.1.1991.1.1.3.5.2.1.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfRstpConfigBPDUTransmitted,Counter32,read-only,,current,,RSTP configuration bridge protocol unit transmitted counter. .1.3.6.1.4.1.1991.1.1.3.5.2.1.24,FOUNDRY-SN-SWITCH-GROUP-MIB::snIfRstpTCNBPDUTransmitted,Counter32,read-only,,current,,RSTP topology change notification bridge protocol unit transmitted counter. .1.3.6.1.4.1.1991.1.1.3.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkInfo,,,,,, -.1.3.6.1.4.1.1991.1.1.3.6.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkTable,,not-accessible,,current,,A specific snTrunkTable consists of a number of Trunk port-mask. -.1.3.6.1.4.1.1991.1.1.3.6.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkEntry,,not-accessible,snTrunkIndex,current,,An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership. +.1.3.6.1.4.1.1991.1.1.3.6.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkTable,,not-accessible,,current,,A specific snTrunkTable consists of a number of Trunk port-mask. +.1.3.6.1.4.1.1991.1.1.3.6.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkEntry,,not-accessible,snTrunkIndex,current,,An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership. .1.3.6.1.4.1.1991.1.1.3.6.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkIndex,Integer32,read-only,,current,,The number of the trunk entries can be configured. This can be 32* for Jetcore, and 16* for Ironcore. .1.3.6.1.4.1.1991.1.1.3.6.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkPortMask,Integer32,read-write,,current,,Trunk membership of the Switch. .1.3.6.1.4.1.1991.1.1.3.6.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snTrunkType,INTEGER,read-write,,current,switch(1):server(2),The trunk connection type which specifies what device the trunk ports are connected to. @@ -4010,7 +3992,7 @@ .1.3.6.1.4.1.1991.1.1.3.6.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snMSTrunkIfType,INTEGER,read-write,,current,switch(1):server(2),The trunk connection type which specifies what device the trunk ports are connected to. .1.3.6.1.4.1.1991.1.1.3.6.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snMSTrunkIfRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),To create or delete a table entry. .1.3.6.1.4.1.1991.1.1.3.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSummary,,,,,, -.1.3.6.1.4.1.1991.1.1.3.7.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSummaryMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configuration Summary. disabled(0)..........no Switch Configuration Summary. +.1.3.6.1.4.1.1991.1.1.3.7.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSwSummaryMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configuration Summary. disabled(0)..........no Switch Configuration Summary. .1.3.6.1.4.1.1991.1.1.3.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snDhcpGatewayListInfo,,,,,, .1.3.6.1.4.1.1991.1.1.3.8.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDhcpGatewayListTable,,not-accessible,,current,,A table of DHCP gateway list of addresses. .1.3.6.1.4.1.1991.1.1.3.8.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDhcpGatewayListEntry,,not-accessible,snDhcpGatewayListId,current,,An entry in the IP Port Address table. @@ -4019,7 +4001,7 @@ .1.3.6.1.4.1.1991.1.1.3.8.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDhcpGatewayListRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row or modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snDnsInfo,,,,,, .1.3.6.1.4.1.1991.1.1.3.9.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDnsDomainName,OCTET,read-write,,current,,DNS Domain Name string. -.1.3.6.1.4.1.1991.1.1.3.9.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDnsGatewayIpAddrList,OCTET,read-write,,current,,The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. +.1.3.6.1.4.1.1991.1.1.3.9.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDnsGatewayIpAddrList,OCTET,read-write,,current,,The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. .1.3.6.1.4.1.1991.1.1.3.10,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilter,,,,,, .1.3.6.1.4.1.1991.1.1.3.10.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterTable,,not-accessible,,current,,MAC filter table. .1.3.6.1.4.1.1991.1.1.3.10.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterEntry,,not-accessible,snMacFilterIndex,current,,An entry in the MAC filter table. @@ -4036,7 +4018,7 @@ .1.3.6.1.4.1.1991.1.1.3.10.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessTable,,not-accessible,,deprecated,,MAC Filter port access table. .1.3.6.1.4.1.1991.1.1.3.10.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessEntry,,not-accessible,snMacFilterPortAccessPortIndex,deprecated,,An entry in the MAC Filter Port access table. .1.3.6.1.4.1.1991.1.1.3.10.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessPortIndex,INTEGER,read-only,,deprecated,,The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60. Therefore, port index value for BigIron is from 257 to 3900. -.1.3.6.1.4.1.1991.1.1.3.10.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessFilters,OCTET,read-write,,deprecated,,1st octet correspond to 1st filter number and so on. +.1.3.6.1.4.1.1991.1.1.3.10.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessFilters,OCTET,read-write,,deprecated,,1st octet correspond to 1st filter number and so on. .1.3.6.1.4.1.1991.1.1.3.10.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.10.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterIfAccessTable,,not-accessible,,current,,MAC Filter port access table. .1.3.6.1.4.1.1991.1.1.3.10.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterIfAccessEntry,,not-accessible,snMacFilterIfAccessPortIndex,current,,An entry in the MAC Filter Port access table. @@ -4045,11 +4027,11 @@ .1.3.6.1.4.1.1991.1.1.3.10.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snMacFilterIfAccessRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTP,,,,,, .1.3.6.1.4.1.1991.1.1.3.11.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPGeneral,,,,,, -.1.3.6.1.4.1.1991.1.1.3.11.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPPollInterval,INTEGER,read-write,,current,,Interval specifies how often to poll the NTP server. Each unit is one second. This object is not supported in NI devices from R5.3 DEFVAL { 1800 } +.1.3.6.1.4.1.1991.1.1.3.11.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPPollInterval,INTEGER,read-write,,current,,Interval specifies how often to poll the NTP server. Each unit is one second. DEFVAL { 1800 } .1.3.6.1.4.1.1991.1.1.3.11.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPTimeZone,INTEGER,read-write,,current,alaska(0):aleutian(1):arizona(2):central(3):eastIndiana(4):eastern(5):hawaii(6):michigan(7):mountain(8):pacific(9):samoa(10):gmtPlus1200(11):gmtPlus1100(12):gmtPlus1000(13):gmtPlus0900(14):gmtPlus0800(15):gmtPlus0700(16):gmtPlus0600(17):gmtPlus0500(18):gmtPlus0400(19):gmtPlus0300(20):gmtPlus0200(21):gmtPlus0100(22):gmt(23):gmtMinus0100(24):gmtMinus0200(25):gmtMinus0300(26):gmtMinus0400(27):gmtMinus0500(28):gmtMinus0600(29):gmtMinus0700(30):gmtMinus0800(31):gmtMinus0900(32):gmtMinus1000(33):gmtMinus1100(34):gmtMinus1200(35):gmtPlus1130(36):gmtPlus1030(37):gmtPlus0930(38):gmtPlus0630(39):gmtPlus0530(40):gmtPlus0430(41):gmtPlus0330(42):gmtMinus0330(43):gmtMinus0830(44):gmtMinus0930(45),Time zone. DEFVAL { gmt } .1.3.6.1.4.1.1991.1.1.3.11.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPSummerTimeEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sunday in October every year. DEFVAL { disabled } -.1.3.6.1.4.1.1991.1.1.3.11.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPSystemClock,OCTET,read-write,,current,,System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] octet 3: day of the month [1-31] octet 4: months since January [0-11] octet 5: years since 1900 octet 6: days since Sunday [0-6] Setting this object requires valid value in octets 0 to 5, and zero in octet 6. System clock can be disabled by setting zero to all octets. -.1.3.6.1.4.1.1991.1.1.3.11.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPSync,INTEGER,read-write,,current,other(1):synchronize(2),Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'. This object is not supported in NI devices from R5.3 +.1.3.6.1.4.1.1991.1.1.3.11.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPSystemClock,OCTET,read-write,,current,,System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] octet 3: day of the month [1-31] octet 4: months since January [0-11] octet 5: years since 1900 octet 6: days since Sunday [0-6] Setting this object requires valid value in octets 0 to 5, and zero in octet 6. +.1.3.6.1.4.1.1991.1.1.3.11.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPSync,INTEGER,read-write,,current,other(1):synchronize(2),Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'. .1.3.6.1.4.1.1991.1.1.3.11.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPServerTable,,not-accessible,,current,,NTP (Network Time Protocol) server table. .1.3.6.1.4.1.1991.1.1.3.11.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPServerEntry,,not-accessible,snNTPServerIp,current,,An entry in the NTP server table. .1.3.6.1.4.1.1991.1.1.3.11.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPServerIp,IpAddress,read-only,,current,,NTP server IP address. @@ -4057,12 +4039,12 @@ .1.3.6.1.4.1.1991.1.1.3.11.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snNTPServerRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a NTP server table entry. .1.3.6.1.4.1.1991.1.1.3.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadius,,,,,, .1.3.6.1.4.1.1991.1.1.3.12.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusGeneral,,,,,, -.1.3.6.1.4.1.1991.1.1.3.12.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusSNMPAccess,INTEGER,read-only,,current,disabled(0):enabled(1),Indicate whether RADIUS server and key related MIB objects can be accessed by SNMP manager. If value is disabled, then snRadiusKey and snRadiusServerTable objects will not be accessible. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.12.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusSNMPAccess,INTEGER,read-only,,current,disabled(0):enabled(1),Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'. DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.3.12.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusEnableTelnetAuth,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'. DEFVAL { disabled } -.1.3.6.1.4.1.1991.1.1.3.12.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusRetransmit,INTEGER,read-write,,current,,The number of authentication query retransmissions to the Radius server. DEFVAL { 3 } +.1.3.6.1.4.1.1991.1.1.3.12.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusRetransmit,INTEGER,read-write,,current,,The number of authentication query retransmissions to the Radius server. DEFVAL { 2 } .1.3.6.1.4.1.1991.1.1.3.12.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusTimeOut,INTEGER,read-write,,current,,Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second. DEFVAL { 3 } -.1.3.6.1.4.1.1991.1.1.3.12.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusDeadTime,INTEGER,read-write,,current,,Interval specifies Radius server dead time, each unit is one minute. DEFVAL { 3 } -.1.3.6.1.4.1.1991.1.1.3.12.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. FastIron and NetIron platforms support keysize upto 64 characters. +.1.3.6.1.4.1.1991.1.1.3.12.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusDeadTime,INTEGER,read-write,,current,,Interval specifies Radius server dead time, each unit is one minute. DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.12.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. .1.3.6.1.4.1.1991.1.1.3.12.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusLoginMethod,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. .1.3.6.1.4.1.1991.1.1.3.12.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusEnableMethod,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. .1.3.6.1.4.1.1991.1.1.3.12.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusWebServerMethod,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods. @@ -4073,107 +4055,91 @@ .1.3.6.1.4.1.1991.1.1.3.12.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerAuthPort,Integer32,read-write,,current,,Authentication UDP port number. DEFVAL { 1812 } .1.3.6.1.4.1.1991.1.1.3.12.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerAcctPort,Integer32,read-write,,current,,Account UDP port number. DEFVAL { 1813 } .1.3.6.1.4.1.1991.1.1.3.12.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a Radius server table entry. -.1.3.6.1.4.1.1991.1.1.3.12.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerRowKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. FastIron and NetIron platforms support keysize upto 64 characters. +.1.3.6.1.4.1.1991.1.1.3.12.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerRowKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. .1.3.6.1.4.1.1991.1.1.3.12.2.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snRadiusServerUsage,INTEGER,read-write,,current,default(1):authenticationOnly(2):authorizationOnly(3):accountingOnly(4),To allow this server to be dedicated for a particular AAA activity. .1.3.6.1.4.1.1991.1.1.3.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacs,,,,,, .1.3.6.1.4.1.1991.1.1.3.13.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsGeneral,,,,,, .1.3.6.1.4.1.1991.1.1.3.13.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsRetransmit,INTEGER,read-write,,current,,The number of authentication query retransmissions to the Tacacs server. DEFVAL { 3 } .1.3.6.1.4.1.1991.1.1.3.13.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsTimeOut,INTEGER,read-write,,current,,Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second. DEFVAL { 3 } .1.3.6.1.4.1.1991.1.1.3.13.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsDeadTime,INTEGER,read-write,,current,,Interval specifies Tacacs server dead time, each unit is one minute. DEFVAL { 3 } -.1.3.6.1.4.1.1991.1.1.3.13.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. FastIron and NetIron platforms support keysize upto 64 characters. -.1.3.6.1.4.1.1991.1.1.3.13.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsSNMPAccess,INTEGER,read-only,,current,disabled(0):enabled(1),Indicate whether TACACS+ server and key related MIB objects can be accessed by SNMP manager. If value is disabled, then snTacacsKey and snTacacsServerTable MIB objects will not be accessible. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.13.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. +.1.3.6.1.4.1.1991.1.1.3.13.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsSNMPAccess,INTEGER,read-only,,current,disabled(0):enabled(1),Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'. DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.3.13.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerTable,,not-accessible,,current,,Tacacs server table. .1.3.6.1.4.1.1991.1.1.3.13.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerEntry,,not-accessible,snTacacsServerIp,current,,An entry in the Tacacs server table. .1.3.6.1.4.1.1991.1.1.3.13.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerIp,IpAddress,read-only,,current,,Tacacs server IP address. .1.3.6.1.4.1.1991.1.1.3.13.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerAuthPort,Integer32,read-write,,current,,Authentication UDP port number. DEFVAL { 49 } .1.3.6.1.4.1.1991.1.1.3.13.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a Tacacs server table entry. -.1.3.6.1.4.1.1991.1.1.3.13.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerRowKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. FastIron and NetIron platforms support keysize upto 64 characters. +.1.3.6.1.4.1.1991.1.1.3.13.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerRowKey,OCTET,read-write,,current,,Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. .1.3.6.1.4.1.1991.1.1.3.13.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snTacacsServerUsage,INTEGER,read-write,,current,default(1):authenticationOnly(2):authorizationOnly(3):accountingOnly(4),To allow this server to be dedicated for a particular AAA activity. .1.3.6.1.4.1.1991.1.1.3.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snQos,,,,,, -.1.3.6.1.4.1.1991.1.1.3.14.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileTable,,not-accessible,,current,,A table contains the configuration of qos profile groups. +.1.3.6.1.4.1.1991.1.1.3.14.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileTable,,not-accessible,,current,,A table contains the configuration of qos profile groups. .1.3.6.1.4.1.1991.1.1.3.14.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileEntry,,not-accessible,snQosProfileIndex,current,,An entry of the snQosProfileTable. .1.3.6.1.4.1.1991.1.1.3.14.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileIndex,INTEGER,read-only,,current,,The table index of QOS Profile. .1.3.6.1.4.1.1991.1.1.3.14.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileName,OCTET,read-write,,current,,Qos Profile Name string. .1.3.6.1.4.1.1991.1.1.3.14.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileRequestedBandwidth,INTEGER,read-write,,current,,Qos Profile Requested Bandwidth. .1.3.6.1.4.1.1991.1.1.3.14.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosProfileCalculatedBandwidth,INTEGER,read-only,,current,,Qos Profile Calculated Bandwidth. -.1.3.6.1.4.1.1991.1.1.3.14.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindTable,,not-accessible,,current,,A table contains the configuration of 802.1p to qos profile binding groups. +.1.3.6.1.4.1.1991.1.1.3.14.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindTable,,not-accessible,,current,,A table contains the configuration of 802.1p to qos profile binding groups. .1.3.6.1.4.1.1991.1.1.3.14.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindEntry,,not-accessible,snQosBindIndex,current,,An entry of the snQosBindTable. .1.3.6.1.4.1.1991.1.1.3.14.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindIndex,INTEGER,read-only,,current,,The table index of QOS Bind. .1.3.6.1.4.1.1991.1.1.3.14.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindPriority,Integer32,read-only,,current,,QOS bind priority. .1.3.6.1.4.1.1991.1.1.3.14.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snQosBindProfileIndex,INTEGER,read-write,,current,,QOS Bind Profile Index. This is pointer to the index of snQosProfile Table. .1.3.6.1.4.1.1991.1.1.3.14.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttack,,,,,, .1.3.6.1.4.1.1991.1.1.3.14.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackGlobal,,,,,, -.1.3.6.1.4.1.1991.1.1.3.14.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackICMPDropCount,Counter32,read-only,,current,,ICMP drop counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackICMPBlockCount,Counter32,read-only,,current,,ICMP block counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackSYNDropCount,Counter32,read-only,,current,,SYN drop counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackSYNBlockCount,Counter32,read-only,,current,,SYN block counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackICMPDropCount,Counter64,read-only,,current,,ICMP drop counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackICMPBlockCount,Counter64,read-only,,current,,ICMP block counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackSYNDropCount,Counter64,read-only,,current,,SYN drop counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackSYNBlockCount,Counter64,read-only,,current,,SYN block counter. .1.3.6.1.4.1.1991.1.1.3.14.3.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortTable,,not-accessible,,current,,Denial of service attack port table. .1.3.6.1.4.1.1991.1.1.3.14.3.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortEntry,,not-accessible,snDosAttackPort,current,,An entry of the denial of service attack port table. .1.3.6.1.4.1.1991.1.1.3.14.3.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPort,Integer32,read-only,,current,,ifIndex value of a port. -.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortICMPDropCount,Counter32,read-only,,current,,ICMP drop counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortICMPBlockCount,Counter32,read-only,,current,,ICMP block counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortSYNDropCount,Counter32,read-only,,current,,SYN drop counter. -.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortSYNBlockCount,Counter32,read-only,,current,,SYN block counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortICMPDropCount,Counter64,read-only,,current,,ICMP drop counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortICMPBlockCount,Counter64,read-only,,current,,ICMP block counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortSYNDropCount,Counter64,read-only,,current,,SYN drop counter. +.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snDosAttackPortSYNBlockCount,Counter64,read-only,,current,,SYN block counter. .1.3.6.1.4.1.1991.1.1.3.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snAAA,,,,,, .1.3.6.1.4.1.1991.1.1.3.15.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthentication,,,,,, +.1.3.6.1.4.1.1991.1.1.3.15.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthenticationDot1x,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authenticate by requesting radius server none(6) - no authentication Setting a zero length octet string invalidates all previous authentication methods. +.1.3.6.1.4.1.1991.1.1.3.15.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthenticationEnable,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. +.1.3.6.1.4.1.1991.1.1.3.15.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthenticationLogin,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. +.1.3.6.1.4.1.1991.1.1.3.15.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthenticationSnmpserver,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication local(3) - Use local user for authentication none(6) - no authentication Setting a zero length octet string invalidates all previous authentication methods. +.1.3.6.1.4.1.1991.1.1.3.15.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthenticationWebserver,OCTET,read-write,,current,,A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable password for authentication radius(2) - authenticate by requesting radius server local(3) - Use local user for authentication line(4) - Use line (telnet) password for authentication tacplus(5) - authenticate by requesting tacplus server none(6) - no authentication tacacs(7) - Use TACACS authentication Setting a zero length octet string invalidates all previous authentication methods. .1.3.6.1.4.1.1991.1.1.3.15.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorization,,,,,, .1.3.6.1.4.1.1991.1.1.3.15.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorizationCommandMethods,OCTET,read-write,,current,,A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by requesting radius server tacplus(5) - authorize by requesting tacplus server none(6) - skip authorization Setting a zero length octet string invalidates all previous authorization methods. .1.3.6.1.4.1.1991.1.1.3.15.2.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorizationCommandLevel,INTEGER,read-write,,current,level0(0):level4(4):level5(5),Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Privilege level 4 5 - Privilege level 5. .1.3.6.1.4.1.1991.1.1.3.15.2.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorizationExec,OCTET,read-write,,current,,A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value: radius(2) - send exec authorization request to radius server tacplus(5) - send exec authorization request to tacplus server none(6) - no exec authorization Setting a zero length octet string invalidates all authorization methods. +.1.3.6.1.4.1.1991.1.1.3.15.2.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorizationCoaEnable,INTEGER,read-write,,current,enable(1):disable(0),For change of Authorization (COA) enable. Possible enumeration values: 1 - Enable COA 0 - No Enable COA. +.1.3.6.1.4.1.1991.1.1.3.15.2.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snAuthorizationCoaIgnore,OCTET,read-write,,current,,For change of Authorization (COA) ignore COA commands. Possible enumeration values: dm-request(1) - Disconnect message request modify-acl(2) - Modify access control list reauth-host(4) - Re-authenticate the host disable-port(8) - Disable the port flip-port(10) - Bounce the port. .1.3.6.1.4.1.1991.1.1.3.15.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snAccounting,,,,,, .1.3.6.1.4.1.1991.1.1.3.15.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snAccountingCommandMethods,OCTET,read-write,,current,,A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. .1.3.6.1.4.1.1991.1.1.3.15.3.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snAccountingCommandLevel,INTEGER,read-write,,current,level0(0):level4(4):level5(5),Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 - Privilege level 4 level5 - Privilege level 5. .1.3.6.1.4.1.1991.1.1.3.15.3.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snAccountingExec,OCTET,read-write,,current,,A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. .1.3.6.1.4.1.1991.1.1.3.15.3.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snAccountingSystem,OCTET,read-write,,current,,A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods. -.1.3.6.1.4.1.1991.1.1.3.16,FOUNDRY-SN-SWITCH-GROUP-MIB::snCAR,,,,,, +.1.3.6.1.4.1.1991.1.1.3.16,FOUNDRY-CAR-MIB::snCAR,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.3.16.1,FOUNDRY-CAR-MIB::snPortCARs,,,,,, .1.3.6.1.4.1.1991.1.1.3.16.1.1,FOUNDRY-CAR-MIB::snPortCARTable,,not-accessible,,current,,A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic. -.1.3.6.1.4.1.1991.1.1.3.16.1.1.1,FOUNDRY-CAR-MIB::snPortCAREntry,,not-accessible,snPortCARifIndex:snPortCARDirection:snPortCARRowIndex,current,,A collection of rate-limit configuration objects on this interface. +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1,FOUNDRY-CAR-MIB::snPortCAREntry,,not-accessible,snPortCARifIndex:snPortCARDirection:snPortCARRowIndex,current,,A collection of rate-limit configuration objects on this interface. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.1,FOUNDRY-CAR-MIB::snPortCARifIndex,Integer32,read-only,,current,,The ifIndex value for this rate limit entry. -.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.2,FOUNDRY-CAR-MIB::snPortCARDirection,INTEGER,read-only,,current,input(0):output(1),The input or output transmission direction for the Rate Limit object. input (0), --for inbound traffic output(1) --for outbound traffic +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.2,FOUNDRY-CAR-MIB::snPortCARDirection,INTEGER,read-only,,current,input(0):output(1),The input or output transmission direction for the Rate Limit object. input (0), --for inbound traffic output(1) --for outbound traffic .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.3,FOUNDRY-CAR-MIB::snPortCARRowIndex,INTEGER,read-only,,current,,The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.4,FOUNDRY-CAR-MIB::snPortCARType,INTEGER,read-only,,current,all(3):quickAcc(2):standardAcc(1),The type of traffic rate-limited against. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.5,FOUNDRY-CAR-MIB::snPortCARAccIdx,Integer32,read-only,,current,,The index to the access list if RateLimitType is either quickAcc or standardAcc. -.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.6,FOUNDRY-CAR-MIB::snPortCARRate,Integer32,read-only,,current,,The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in bits per second. -.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.7,FOUNDRY-CAR-MIB::snPortCARLimit,Integer32,read-only,,current,,This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes that are guaranteed to be transported by the network at the average rate under normal conditions during committed time interval. This normal burst size is in bytes. +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.6,FOUNDRY-CAR-MIB::snPortCARRate,Integer32,read-create,,current,,The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in bits per second. +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.7,FOUNDRY-CAR-MIB::snPortCARLimit,Integer32,read-create,,current,,This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes that are guaranteed to be transported by the network at the average rate under normal conditions during committed time interval. This normal burst size is in bytes. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.8,FOUNDRY-CAR-MIB::snPortCARExtLimit,Integer32,read-only,,current,,This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.9,FOUNDRY-CAR-MIB::snPortCARConformAction,INTEGER,read-only,,current,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits. -.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.10,FOUNDRY-CAR-MIB::snPortCARExceedAction,INTEGER,read-only,,current,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits. +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.10,FOUNDRY-CAR-MIB::snPortCARExceedAction,INTEGER,read-only,,current,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.11,FOUNDRY-CAR-MIB::snPortCARStatSwitchedPkts,Counter64,read-only,,current,,The counter of packets permitted by this rate limit. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.12,FOUNDRY-CAR-MIB::snPortCARStatSwitchedBytes,Counter64,read-only,,current,,The counter of bytes permitted by this interface. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.13,FOUNDRY-CAR-MIB::snPortCARStatFilteredPkts,Counter64,read-only,,current,,The counter of packets which exceeded this rate limit. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.14,FOUNDRY-CAR-MIB::snPortCARStatFilteredBytes,Counter64,read-only,,current,,The counter of bytes which exceeded this rate limit. .1.3.6.1.4.1.1991.1.1.3.16.1.1.1.15,FOUNDRY-CAR-MIB::snPortCARStatCurBurst,Gauge32,read-only,,current,,The current received burst size. +.1.3.6.1.4.1.1991.1.1.3.16.1.1.1.16,FOUNDRY-CAR-MIB::snPortCARRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The variable is used to create new row in the rate limit table, only CreateAndGo(4) and destroy(6) are supported values .1.3.6.1.4.1.1991.1.1.3.16.1.2,FOUNDRY-CAR-MIB::agRateLimitCounterTable,,not-accessible,,current,,A table of rate limit counter entries. -.1.3.6.1.4.1.1991.1.1.3.16.1.2.1,FOUNDRY-CAR-MIB::agRateLimitCounterEntry,,not-accessible,ifIndex:snPortCARRowIndex,current,,A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface. +.1.3.6.1.4.1.1991.1.1.3.16.1.2.1,FOUNDRY-CAR-MIB::agRateLimitCounterEntry,,not-accessible,ifIndex:snPortCARRowIndex,current,,A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface. .1.3.6.1.4.1.1991.1.1.3.16.1.2.1.1,FOUNDRY-CAR-MIB::agRateLimitCounterFwdedOctets,Counter64,read-only,,current,,The forwarded octet count for this rate limit entry. .1.3.6.1.4.1.1991.1.1.3.16.1.2.1.2,FOUNDRY-CAR-MIB::agRateLimitCounterDroppedOctets,Counter64,read-only,,current,,The dropped octet count for this rate limit entry. .1.3.6.1.4.1.1991.1.1.3.16.1.2.1.3,FOUNDRY-CAR-MIB::agRateLimitCounterReMarkedOctets,Counter64,read-only,,current,,The remarked octet count for this rate limit entry. .1.3.6.1.4.1.1991.1.1.3.16.1.2.1.4,FOUNDRY-CAR-MIB::agRateLimitCounterTotalOctets,Counter64,read-only,,current,,The total octet count for this rate limit entry. -.1.3.6.1.4.1.1991.1.1.3.16.1.3,FOUNDRY-CAR-MIB::agRateLimitCounterIndexTable,,not-accessible,,current,,A table to map each rowindexes of rate limit counter entries to their corresponding ACL ID (or) VLAN ID (or) VLAN Group ID. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1,FOUNDRY-CAR-MIB::agRateLimitCounterIndexEntry,,not-accessible,ifIndex:snPortCARRowIndex,current,,A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.1,FOUNDRY-CAR-MIB::agRateLimitCounterIndexRowIndex,INTEGER,read-only,,current,,The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.2,FOUNDRY-CAR-MIB::agRateLimitCounterIndexDirection,INTEGER,read-only,,current,input(0):output(1),The input or output transmission direction for the Rate Limit object. input (0), --for inbound traffic output(1) --for outbound traffic -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.3,FOUNDRY-CAR-MIB::agRateLimitCounterIndexACLID,Integer32,read-only,,current,,The corresponding ACL ID to match with the row index of the ratelimit counter table. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.4,FOUNDRY-CAR-MIB::agRateLimitCounterIndexVLANID,Integer32,read-only,,current,,The corresponding VLAN ID to match with the row index of the ratelimit counter table. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.5,FOUNDRY-CAR-MIB::agRateLimitCounterIndexVLANGroupID,Integer32,read-only,,current,,The corresponding VLAN Group ID to match with the row index of the ratelimit counter table. -.1.3.6.1.4.1.1991.1.1.3.16.1.3.1.6,FOUNDRY-CAR-MIB::agRateLimitCounterIndexMACAddress,OCTET,read-only,,current,,The corresponding MAC Address for Source MAC based rate limit to match with the row index of the ratelimit counter table. DEFVAL { 0 } -.1.3.6.1.4.1.1991.1.1.3.16.1.4,FOUNDRY-CAR-MIB::agRateLimitBUMCounterTable,,not-accessible,,current,,This table displays The number of bytes dropped due to BUM rate-limit on the port, based on configured packet type and VLANID Committed Burst Size(CBS) in bits Committed Information Rate(CIR) in bits AlertLowLevelThreshold in bits AlertHighLevelThreshold in bits ShutdownTimeout in minutes -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1,FOUNDRY-CAR-MIB::agRateLimitBUMCounterEntry,,not-accessible,agRateLimitBUMCounterIfindex:agRateLimitBUMCounterVLANID:agRateLimitBUMCounterPacketType,current,,An entry containing the number of bytes dropped due to BUM rate-limit, followed by CBS ,CIR, AlertLowLevelThreshold, AlertHighLevelThreshold in terms of bits, and ShutdownTimeout in minutes -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.1,FOUNDRY-CAR-MIB::agRateLimitBUMCounterIfindex,Integer32,not-accessible,,current,,Ifindex, a count which uniquely identifies the ports in the chassis. Ranges from 1 to 2048 -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.2,FOUNDRY-CAR-MIB::agRateLimitBUMCounterVLANID,Integer32,not-accessible,,current,, VLANID, a ID which is used to represent the corresponding VLAN in the chassis. Ranges from 1 to 4096 -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.3,FOUNDRY-CAR-MIB::agRateLimitBUMCounterPacketType,INTEGER,not-accessible,,current,unknownunicast(1):multicast(2):unknownunicastmulticast(3):broadcast(4):broadcastunknownunicast(5):broadcastmulticast(6):broadcastunknownunicastmulticast(7), PacketType, used to represent the type of the packet i.e. B(1) or U(2) or BU(3) or M(4) or BM(5) or UM(6) or BUM(7) U?Unknown-Unicast, B?Broadcast and M?Multicast -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.4,FOUNDRY-CAR-MIB::agRateLimitBUMCounterDroppedOctets,Counter64,read-only,,current,, A count used to represent the number of bytes dropped due to BUM rate-limit in bytes. -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.5,FOUNDRY-CAR-MIB::agRateLimitBUMCounterCBS,Counter64,read-only,,current,, A count used to represent the Committed Burst Size in bits. -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.6,FOUNDRY-CAR-MIB::agRateLimitBUMCounterCIR,Counter64,read-only,,current,, A count used to represent the Committed Information Rate in bits. -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.7,FOUNDRY-CAR-MIB::agRateLimitBUMCounterAlertLowLevelThreshold,Counter64,read-only,,current,, A count used to represent the configured lower threshold level in bits, to generate the Alert. -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.8,FOUNDRY-CAR-MIB::agRateLimitBUMCounterAlertHighLevelThreshold,Counter64,read-only,,current,, A count used to represent the configured Higher threshold level in bits, to generate the Alert. -.1.3.6.1.4.1.1991.1.1.3.16.1.4.1.9,FOUNDRY-CAR-MIB::agRateLimitBUMCounterShutdownTimeout,Integer32,read-only,,current,, A count used to represent the Timeout value in terms of minutes, which is the time interval after which the shutdown port will be enabled. -.1.3.6.1.4.1.1991.1.1.3.16.1.5,FOUNDRY-CAR-MIB::snBUMRLNotifications,,,,,, -.1.3.6.1.4.1.1991.1.1.3.16.1.5.1,FOUNDRY-CAR-MIB::snTrapBUMratelimitAlertLowThreshold,,,,,,A snTrapBUMratelimitAlertLowThreshold trap signifies that the ingress packets interms of bits have reached the configured low level threshold. -.1.3.6.1.4.1.1991.1.1.3.16.1.5.2,FOUNDRY-CAR-MIB::snTrapBUMratelimitAlertHighThreshold,,,,,,A snTrapBUMratelimitAlertHighThreshold trap signifies that the ingress packets interms of bits, have reached the configured high level threshold. -.1.3.6.1.4.1.1991.1.1.3.16.1.5.3,FOUNDRY-CAR-MIB::snTrapBUMratelimitShutdownLinkDown,,,,,,A snTrapBUMratelimitShutdownLinkDown trap signifies that the port is shutdown after reaching the configured CIR in bps. -.1.3.6.1.4.1.1991.1.1.3.16.1.5.4,FOUNDRY-CAR-MIB::snTrapBUMratelimitShutdownLinkUp,,,,,,A snTrapBUMratelimitAlertHighThreshold trap signifies that the port is UP after the specified shutdown timeout in minutes. .1.3.6.1.4.1.1991.1.1.3.17,FOUNDRY-SN-SWITCH-GROUP-MIB::snVLanCAR,,,,,, .1.3.6.1.4.1.1991.1.1.3.17.1,FOUNDRY-VLAN-CAR-MIB::snVLanCARs,,,,,, .1.3.6.1.4.1.1991.1.1.3.17.1.1,FOUNDRY-VLAN-CAR-MIB::snVLanCARTable,,not-accessible,,current,,A table of rate limit configuration entries for a vlan. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic. @@ -4224,6 +4190,11 @@ .1.3.6.1.4.1.1991.1.1.3.18.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snNetFlowIfFlowSwitching,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching .1.3.6.1.4.1.1991.1.1.3.19,FOUNDRY-SN-SWITCH-GROUP-MIB::snSFlow,,,,,, .1.3.6.1.4.1.1991.1.1.3.19.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSFlowGlb,,,,,, +.1.3.6.1.4.1.1991.1.1.3.19.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowStatus,INTEGER,read-only,,current,enabled(1):disabled(2),To enable/disable sflow sampling on all the interfaces. disabled - sflow sampling disabled enableed - sflow sampling enabled Unless globally enabled, it can't be enabled on an interface specifically. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.19.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowSampleRate,Unsigned32,read-only,,current,,To set the rate wt which the packet sampling to happen. A value of 512 means, every 512th packet is simpleed for flow collection. DEFVAL { 4096 } +.1.3.6.1.4.1.1991.1.1.3.19.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowSourcePort,Unsigned32,read-only,,current,,To set the UDP source port for sending the sflow samples to the configured collectors. Any permissible value can be configured for this and default is 8888. DEFVAL { 8888 } +.1.3.6.1.4.1.1991.1.1.3.19.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowAgentAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determined based on L2/L3 switch, but can be administratively set also. +.1.3.6.1.4.1.1991.1.1.3.19.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowAgentAddr,OCTET,read-only,,current,,To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determined based on L2/L3 switch, but can be administratively set also. .1.3.6.1.4.1.1991.1.1.3.19.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowCollectorTable,,not-accessible,,current,,Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one sFlow collectors. This table has been created to fill this gap. .1.3.6.1.4.1.1991.1.1.3.19.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowCollectorEntry,,not-accessible,snSflowCollectorIndex,current,,A row in the sFlow collector table. .1.3.6.1.4.1.1991.1.1.3.19.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snSflowCollectorIndex,Integer32,read-only,,current,,The index to the sFlow collector table. @@ -4236,11 +4207,11 @@ .1.3.6.1.4.1.1991.1.1.3.20.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceTable,,not-accessible,,current,,Status of FDP on the device's interfaces. .1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceEntry,,not-accessible,snFdpInterfaceIfIndex,current,,An entry in the snFdpInterfaceTable, having the status of FDP on an interface. .1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceIfIndex,Integer32,not-accessible,,current,,ifIndex value of the local interface. -.1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceFdpEnable,INTEGER,read-write,,current,false(0):true(1),The flag, whether the Foundry Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE). DEFVAL { true } +.1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceFdpEnable,INTEGER,read-write,,current,false(0):true(1),The flag, whether the Ruckus Wireless Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE). DEFVAL { true } .1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpInterfaceCdpEnable,INTEGER,read-write,,current,false(0):true(1),The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE). DEFVAL { true } .1.3.6.1.4.1.1991.1.1.3.20.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCache,,,,,, .1.3.6.1.4.1.1991.1.1.3.20.1.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheTable,,not-accessible,,current,,The table for the cached information obtained via receiving FDP/CDP messages. -.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheEntry,,not-accessible,snFdpCacheIfIndex:snFdpCacheDeviceIndex,current,,An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally. +.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheEntry,,not-accessible,snFdpCacheIfIndex:snFdpCacheDeviceIndex,current,,An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally. .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheIfIndex,Integer32,not-accessible,,current,,ifIndex value of the local interface. .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheDeviceIndex,Integer32,not-accessible,,current,,Identification of a device, which sent FDP/CDP messages .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheDeviceId,OCTET,read-only,,current,,The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent FDP/CDP message. @@ -4254,10 +4225,10 @@ .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.11,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheIsAggregateVlan,INTEGER,read-only,,current,false(0):true(1),Neighbor device is in aggregated-vlan. .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.12,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheTagType,Integer32,read-only,,current,,Neighbor device tag-type. .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.13,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachePortVlanMask,OCTET,read-only,,current,,Neighbor device port VLAN masks in 512-byte octet string. -.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachePortTagMode,INTEGER,read-only,,current,untagged(1):tagged(2):dual(3),Neighbor device port tag mode -.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheDefaultTrafficeVlanIdForDualMode,Integer32,read-only,,current,,Default traffic vlan id for neighbor device dual-mode port +.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachePortTagMode,INTEGER,read-only,,current,untagged(1):tagged(2):dual(3),Neighbor device port tag mode. Dual(3) mode not supported from FI 08.0.80 release. This object will return 0 for dual(3) Mode. +.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCacheDefaultTrafficeVlanIdForDualMode,Integer32,read-only,,deprecated,,This object return 0 due to no support for this object from FI 08.0.80 release. .1.3.6.1.4.1.1991.1.1.3.20.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobal,,,,,, -.1.3.6.1.4.1.1991.1.1.3.20.1.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobalRun,INTEGER,read-write,,current,false(0):true(1),The flag, whether the Foundry Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.20.1.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobalRun,INTEGER,read-write,,current,false(0):true(1),The flag, whether the Ruckus Wireless Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled. DEFVAL { false } .1.3.6.1.4.1.1991.1.1.3.20.1.3.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobalMessageInterval,INTEGER,read-write,,current,,The interval at which FDP messages are to be generated. The default value is 60 seconds. DEFVAL { 60 } .1.3.6.1.4.1.1991.1.1.3.20.1.3.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobalHoldTime,INTEGER,read-write,,current,,The time for the receiving device holds FDP message. The default value is 180 seconds. DEFVAL { 180 } .1.3.6.1.4.1.1991.1.1.3.20.1.3.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpGlobalCdpRun,INTEGER,read-write,,current,false(0):true(1),An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled. DEFVAL { false } @@ -4269,9 +4240,9 @@ .1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachedAddrDeviceAddrEntryIndex,Integer32,not-accessible,,current,,A unique vlaue for address entry in device from which FDP/CDP messages are being received. .1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachedAddrType,INTEGER,read-only,,current,ip(1):ipx(2):appletalk(3),An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue. .1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snFdpCachedAddrValue,OCTET,read-only,,current,,The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number -.1.3.6.1.4.1.1991.1.1.3.21,FOUNDRY-SN-SWITCH-GROUP-MIB::snVsrp,,,,,, +.1.3.6.1.4.1.1991.1.1.3.21,FOUNDRY-SN-VSRP-MIB::snVsrp,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.3.21.1,FOUNDRY-SN-VSRP-MIB::snVsrpGlobal,,,,,, -.1.3.6.1.4.1.1991.1.1.3.21.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpGroupOperModeVsrp,INTEGER,read-write,,current,disabled(0):enabled(1),The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activate VSRP +.1.3.6.1.4.1.1991.1.1.3.21.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpGroupOperModeVsrp,INTEGER,read-write,,current,disabled(0):enabled(1),The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activate VSRP .1.3.6.1.4.1.1991.1.1.3.21.1.2,FOUNDRY-SN-VSRP-MIB::snVsrpIfStateChangeTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.1.3.21.1.3,FOUNDRY-SN-VSRP-MIB::snVsrpIfMaxNumVridPerIntf,Integer32,read-only,,current,,Indicates the maximum number of VRID per interface. .1.3.6.1.4.1.1991.1.1.3.21.1.4,FOUNDRY-SN-VSRP-MIB::snVsrpIfMaxNumVridPerSystem,Integer32,read-only,,current,,Indicates the maximum number of VRID per system. @@ -4281,26 +4252,26 @@ .1.3.6.1.4.1.1991.1.1.3.21.2.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpIfEntry,,not-accessible,snVsrpIfVlanId,current,,The VSRP Interface Entry describes one interface from the viewpoint of VSRP. .1.3.6.1.4.1.1991.1.1.3.21.2.1.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpIfVlanId,Integer32,read-only,,current,,Vlan index. .1.3.6.1.4.1.1991.1.1.3.21.2.1.1.2,FOUNDRY-SN-VSRP-MIB::snVsrpIfAuthType,INTEGER,read-write,,current,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface. -.1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3,FOUNDRY-SN-VSRP-MIB::snVsrpIfAuthPassword,OCTET,read-write,,current,,The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd and the size should be greater than zero. On reading this object, if the snVsrpIfAuthType type is noAuth, then zero length string will be returned +.1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3,FOUNDRY-SN-VSRP-MIB::snVsrpIfAuthPassword,OCTET,read-write,,current,,The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. .1.3.6.1.4.1.1991.1.1.3.21.3,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtr,,,,,, .1.3.6.1.4.1.1991.1.1.3.21.3.1,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTable,,not-accessible,,current,,The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrEntry,,not-accessible,snVsrpVirRtrVlanId:snVsrpVirRtrId,current,,The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrVlanId,Integer32,read-only,,current,,Vlan index. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrId,INTEGER,read-only,,current,,One of the virtual router ID of this vsrp interface. -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrOwnership,INTEGER,read-write,,current,incomplete(0):owner(1):backup(2),The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface. -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCfgPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2). For NetIron platforms, the range is between 8 to 255. DEFVAL { 100 } -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTrackPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrOwnership,INTEGER,read-write,,current,incomplete(0):owner(1):backup(2),The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface. +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCfgPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2). DEFVAL { 100 } +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTrackPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurrPriority,INTEGER,read-only,,current,,The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrHelloInt,INTEGER,read-write,,current,,Time interval between advertisements (seconds). DEFVAL { 1 } .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrDeadInt,INTEGER,read-write,,current,,Dead interval (seconds). .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrPreemptMode,INTEGER,read-write,,current,disabled(0):enabled(1),This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrState,INTEGER,read-only,,current,init(0):master(1):backup(2),This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrIpAddrMask,OCTET,read-write,,current,,The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrIpAddrMask,OCTET,read-write,,current,,The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrActivate,INTEGER,read-write,,current,disabled(0):enabled(1),This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership. +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrAdvertiseBackup,INTEGER,read-write,,current,disabled(0):enabled(1),Set Advertise this backup router to master DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrHoldDownInt,INTEGER,read-write,,current,,VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode DEFVAL { 2 } -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrInitTtl,INTEGER,read-write,,current,,VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrInitTtl,INTEGER,read-write,,current,,VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network DEFVAL { 2 } .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrIncPortList,OCTET,read-write,,current,,Include all free ports of the VLAN into its control ports .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrSave,INTEGER,read-write,,current,disabled(0):enabled(1),Set VSRP to save current parameters value DEFVAL { disabled } .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrBackupInt,INTEGER,read-write,,current,,Time interval between backup routers hello message advertisements (seconds). DEFVAL { 60 } @@ -4318,7 +4289,7 @@ .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurrDeadInt,Integer32,read-only,,current,,Current Dead interval (in 100 milliseconds). .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurHelloInt,INTEGER,read-only,,current,,Set backup router hello interval .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurHoldDownInt,INTEGER,read-only,,current,,VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode -.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurInitTtl,INTEGER,read-only,,current,,VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network +.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrCurInitTtl,INTEGER,read-only,,current,,VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrHelloMacAddress,OCTET,read-only,,current,,Hello MAC address. .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36,FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrMasterIpAddr,IpAddress,read-only,,current,,The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. .1.3.6.1.4.1.1991.1.1.3.22,FOUNDRY-SN-SWITCH-GROUP-MIB::snArpInfo,,,,,, @@ -4330,7 +4301,7 @@ .1.3.6.1.4.1.1991.1.1.3.22.1.5,FOUNDRY-SN-ARP-GROUP-MIB::snArpStatsPendingDrop,Counter32,read-only,,current,,The total number of ARP pending packets discarded. .1.3.6.1.4.1.1991.1.1.3.22.1.6,FOUNDRY-SN-ARP-GROUP-MIB::snArpStatsInvalidSource,Counter32,read-only,,current,,The total number of ARP packets received with invalid sender protocol address. .1.3.6.1.4.1.1991.1.1.3.22.1.7,FOUNDRY-SN-ARP-GROUP-MIB::snArpStatsInvalidDestination,Counter32,read-only,,current,,The total number of ARP packets received with invalid destination protocol address. -.1.3.6.1.4.1.1991.1.1.3.23,FOUNDRY-SN-SWITCH-GROUP-MIB::snWireless,,,,,, +.1.3.6.1.4.1.1991.1.1.3.23,FOUNDRY-SN-WIRELESS-GROUP-MIB::snWireless,,,,,, .1.3.6.1.4.1.1991.1.1.3.23.1,FOUNDRY-SN-WIRELESS-GROUP-MIB::wgGroup,,,,,, .1.3.6.1.4.1.1991.1.1.3.23.1.1,FOUNDRY-SN-WIRELESS-GROUP-MIB::wgMobilityId,Integer32,read-write,,current,,Unique Identifier used to specify the mobility doamin. Valid range is <1 - 65535>. Use <0> to remove the domain. .1.3.6.1.4.1.1991.1.1.3.23.1.2,FOUNDRY-SN-WIRELESS-GROUP-MIB::wgVpnPTDeletePolicy,Integer32,read-write,,current,,Write a valid VPN pass through policy ID to remove the policy. Return zero when reading this object. @@ -4376,9 +4347,9 @@ .1.3.6.1.4.1.1991.1.1.3.24.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurity,,,,,, .1.3.6.1.4.1.1991.1.1.3.24.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityTable,,not-accessible,,current,,Status of port MAC security on the device's interfaces. .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityEntry,,not-accessible,snPortMacSecurityIfIndex:snPortMacSecurityResource:snPortMacSecurityQueryIndex,current,,An entry in the snPortMacSecurityTable -.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIfIndex,Unsigned32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIfIndex,Unsigned32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityResource,INTEGER,read-only,,current,local(1):shared(2),The MAC address was secured using local or shared resources. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityQueryIndex,Unsigned32,read-only,,current,,Entry index within the given resource of local Ethernet interface on which MAC security is configured. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityQueryIndex,Unsigned32,read-only,,current,,Entry index within the given resource of local Ethernet interface on which MAC security is configured. .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityMAC,OCTET,read-only,,current,,The secure MAC address for this interface. .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAgeLeft,Unsigned32,read-only,,current,,The number of minutes the MAC address will remain secure before being aged out. 0 means no aging. .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityShutdownStatus,INTEGER,read-only,,current,up(1):down(2),Interface up/down status. @@ -4395,25 +4366,25 @@ .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentEntry,,not-accessible,snPortMacSecurityIntfContentIfIndex,current,,An entry in the snPortMacSecurityIntfContentTable .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentIfIndex,Integer32,not-accessible,,current,,In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2863. .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentSecurity,INTEGER,read-write,,current,disable(0):enable(1),Port security for this interface can be either disabled or enabled. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentViolationType,INTEGER,read-write,,current,shutdown(0):restrict(1),Port security violation type for this interface is shutdown or restrict. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentShutdownTime,Unsigned32,read-write,,current,,If snPortMacSecurityIntfContentViolationType is shutdown(1), this value gives the number of seconds this interface is shut down when violation occurs. In the shutdown(1) case, 0 means interface is permanently down. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentShutdownTimeLeft,Unsigned32,read-only,,current,,If snPortMacSecurityIntfContentViolationType is shutdown(1), whether this interface has been shut down due to a security violation and the value gives the number of seconds before this interface is enabled again. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentViolationType,INTEGER,read-write,,current,shutdown(0):restrict(1):protect(2),Port security violation type for this interface is shutdown or restrict. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentShutdownTime,Unsigned32,read-write,,current,,If snPortMacSecurityIntfContentViolationType is shutdown(0), this value gives the number of seconds this interface is shut down when violation occurs. In the shutdown(1) case, 0 means interface is permanently down. If snPortMacSecurityIntfContentViolationType is restrict(1) or protect(2), this value will be always 0. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentShutdownTimeLeft,Unsigned32,read-only,,current,,If snPortMacSecurityIntfContentViolationType is shutdown(1), whether this interface has been shut down due to a security violation and the value gives the number of seconds before this interface is enabled again. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0. .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.6,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentAgeOutTime,Unsigned32,read-write,,current,,The amount of time, in minutes, MAC addresses learned on this interface will remain secure. It allows configurable values 0-1440. 0 means no aging permanently. .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.7,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentMaxLockedMacAllowed,Unsigned32,read-write,,current,,Maximum number of security MAC addresses can be locked to this interface. .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.8,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentTotalMACs,Unsigned32,read-only,,current,,The totol number of port MAC security MAC addresses are locked in this interface. .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.9,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfContentViolationCounts,Unsigned32,read-only,,current,,The totol number of counts of violation are collected in this interface. .1.3.6.1.4.1.1991.1.1.3.24.1.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacTable,,not-accessible,,current,,Status of port MAC security on the device's interfaces. .1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacEntry,,not-accessible,snPortMacSecurityIntfMacIfIndex:snPortMacSecurityIntfMacAddress,current,,An entry in the snPortMacSecurityIntfMacTable -.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacIfIndex,Integer32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacAddress,OCTET,read-only,,current,,The secure MAC address for this local Ethernet interface on which the secure MAC Address is configured and/or learned. The maximum number of the secure MAC Addresses is restricted by the snPortMacSecurityIntfContentMaxLockedMacAllowed. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacIfIndex,Integer32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacAddress,OCTET,read-only,,current,,The secure MAC address for this local Ethernet interface on which the secure MAC Address is configured and/or learned. The maximum number of the secure MAC Addresses is restricted by the snPortMacSecurityIntfContentMaxLockedMacAllowed. .1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacVlanId,Unsigned32,read-write,,current,,The vlan membership of this interface, zero means don't care. .1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityIntfMacRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.24.1.1.5,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacTable,,not-accessible,,current,,Autosave MAC addresses of port MAC security on the device's interfaces. .1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacEntry,,not-accessible,snPortMacSecurityAutosaveMacIfIndex:snPortMacSecurityAutosaveMacResource:snPortMacSecurityAutosaveMacQueryIndex,current,,An entry in the snPortMacSecurityAutosaveMacTable -.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacIfIndex,Integer32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacIfIndex,Integer32,read-only,,current,,ifIndex value of the local Ethernet interface on which MAC security is configured. .1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacResource,INTEGER,read-only,,current,local(1):shared(2),The MAC address was autosaved using local or shared resources. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacQueryIndex,Unsigned32,read-only,,current,,Entry index within the given resource of local Ethernet interface on which MAC security is autosaved. -.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacAddress,OCTET,read-only,,current,,The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacQueryIndex,Unsigned32,read-only,,current,,Entry index within the given resource of local Ethernet interface on which MAC security is autosaved. +.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacSecurityAutosaveMacAddress,OCTET,read-only,,current,,The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved. .1.3.6.1.4.1.1991.1.1.3.24.1.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacGlobalSecurity,,,,,, .1.3.6.1.4.1.1991.1.1.3.24.1.2.1,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacGlobalSecurityFeature,INTEGER,read-write,,current,disable(0):enable(1),Port security for this device can be either disabled or enabled. .1.3.6.1.4.1.1991.1.1.3.24.1.2.2,FOUNDRY-SN-SWITCH-GROUP-MIB::snPortMacGlobalSecurityAgeOutTime,Unsigned32,read-write,,current,,The amount of time, in minutes, MAC addresses learned on this device will remain secure. It allows configurable values in the range of 0-1440. 0 means no aging permanently. @@ -4447,7 +4418,7 @@ .1.3.6.1.4.1.1991.1.1.3.28.4.1.1,FOUNDRY-SN-MAC-AUTHENTICATION-MIB::snMacAuthClearMacSessionIfIndex,Integer32,not-accessible,,current,,ifIndex value of the local interface on which a clear command is issued and monitored. .1.3.6.1.4.1.1991.1.1.3.28.4.1.2,FOUNDRY-SN-MAC-AUTHENTICATION-MIB::snMacAuthClearMacSessionMac,OCTET,not-accessible,,current,,An MAC Session entry indexed by a MAC address. .1.3.6.1.4.1.1991.1.1.3.28.4.1.3,FOUNDRY-SN-MAC-AUTHENTICATION-MIB::snMacAuthClearMacSessionAction,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing an MAC Session entry indexed by a MAC address. -.1.3.6.1.4.1.1991.1.1.3.29,FOUNDRY-SN-SWITCH-GROUP-MIB::snMetroRing,,,,,, +.1.3.6.1.4.1.1991.1.1.3.29,FOUNDRY-SN-MRP-MIB::snMetroRing,,,,,,Management Information Base module for metro ring configuration and statistics. .1.3.6.1.4.1.1991.1.1.3.29.1,FOUNDRY-SN-MRP-MIB::snMetroRingGlobalObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.29.2,FOUNDRY-SN-MRP-MIB::snMetroRingTableObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.29.2.1,FOUNDRY-SN-MRP-MIB::snMetroRingTable,,not-accessible,,current,,Metro ring table. @@ -4476,30 +4447,34 @@ .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.22,FOUNDRY-SN-MRP-MIB::snMetroRingSecPortType,INTEGER,read-only,,current,other(1):regular(2):tunnel(3),Metro ring secondary port type. other(1).....none of the cases in below. regular(2)...port is configured to operate on a single ring. tunnel(3)....port is configured to operate on multiple rings. .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.23,FOUNDRY-SN-MRP-MIB::snMetroRingPriPortActivePort,Integer32,read-only,,current,,The ifIndex value of active primary port. .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.24,FOUNDRY-SN-MRP-MIB::snMetroRingSecPortActivePort,Integer32,read-only,,current,,The ifIndex value of active secondary port. -.1.3.6.1.4.1.1991.1.1.3.31,FOUNDRY-SN-SWITCH-GROUP-MIB::snStacking,,,,,, +.1.3.6.1.4.1.1991.1.1.3.31,FOUNDRY-SN-STACKING-MIB::snStacking,,,,,, Management Information for stacking system configuration and operational status. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.3.31.1,FOUNDRY-SN-STACKING-MIB::snStackingGlobalObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.31.1.1,FOUNDRY-SN-STACKING-MIB::snStackingGlobalConfigState,INTEGER,read-write,,current,none(0):enabled(1):disabled(2),Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disable: stacking is disable, No send and receive packets -.1.3.6.1.4.1.1991.1.1.3.31.1.2,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMacAddress,OCTET,read-write,,current,,Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommended that this command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address -.1.3.6.1.4.1.1991.1.1.3.31.1.3,FOUNDRY-SN-STACKING-MIB::snStackingGlobalPersistentMacTimerState,INTEGER,read-write,,current,enabled(0):disabled(1),Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address -.1.3.6.1.4.1.1991.1.1.3.31.1.4,FOUNDRY-SN-STACKING-MIB::snStackingGlobalPersistentMacTimer,Integer32,read-write,,current,,Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash or removal. This timer is triggered when new active unit is elected. When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. 5 to 6000 - valid value range. 60 - default value. +.1.3.6.1.4.1.1991.1.1.3.31.1.2,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMacAddress,OCTET,read-write,,current,,Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommended that this command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address +.1.3.6.1.4.1.1991.1.1.3.31.1.3,FOUNDRY-SN-STACKING-MIB::snStackingGlobalPersistentMacTimerState,INTEGER,read-write,,deprecated,enabled(0):disabled(1),Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address +.1.3.6.1.4.1.1991.1.1.3.31.1.4,FOUNDRY-SN-STACKING-MIB::snStackingGlobalPersistentMacTimer,Integer32,read-write,,deprecated,,Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash or removal. This timer is triggered when new active unit is elected. When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. 5 to 6000 - valid value range. 60 - default value. .1.3.6.1.4.1.1991.1.1.3.31.1.5,FOUNDRY-SN-STACKING-MIB::snStackingGlobalTopology,INTEGER,read-only,,current,other(1):chain(2):ring(3):standalone(4),The topology of the stacking system .1.3.6.1.4.1.1991.1.1.3.31.1.6,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMode,INTEGER,read-only,,current,stackingMode(1):nonStackingMode(2),The stacking mode of the system. stackingMode: the system has been installed STK EEPROM, and it is in stacking mode. nonStackingMode:the system has not been installed STK EEPROM, and it is not in stacking mode. -.1.3.6.1.4.1.1991.1.1.3.31.1.7,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMixedMode,INTEGER,read-only,,current,mixedStackingMode(1):classicStackingMode(2),The mixed stacking mode of the system. mixedStackingMode: the system is in mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is not in mixed stacking mode (homogeneous stacking). +.1.3.6.1.4.1.1991.1.1.3.31.1.7,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMixedMode,INTEGER,read-only,,current,mixedStackingMode(1):classicStackingMode(2),The mixed stacking mode of the system. mixedStackingMode: the system is in a mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is not in a mixed stacking mode (homogeneous stacking). .1.3.6.1.4.1.1991.1.1.3.31.1.8,FOUNDRY-SN-STACKING-MIB::snStackingGlobalMaxUnitNumber,Integer32,read-only,,current,,The max number of units in the stacking system. 1 as default value for no-stacking device .1.3.6.1.4.1.1991.1.1.3.31.1.9,FOUNDRY-SN-STACKING-MIB::snStackingGlobalHighestPriority,Integer32,read-only,,current,,The highest stack priority that can be configured in the stacking system. 0 as default value for no-stacking device +.1.3.6.1.4.1.1991.1.1.3.31.1.10,FOUNDRY-SN-STACKING-MIB::snStackingGlobalZeroTouchEnable,INTEGER,read-write,,current,none(0):enabled(1),Configure Stack Zero Touch feature for a stacking system on the global level. The Zero Touch feature discovers new stack member units, assigns them IDs, defines stack-port/trunk, and allows member unit to join the stacking system. none: neutral state, receive packets only enabled: Stack Zero touch feature is enabled The none state will be displayed if stacking is not enabled. The default state is none .1.3.6.1.4.1.1991.1.1.3.31.2,FOUNDRY-SN-STACKING-MIB::snStackingTableObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.31.2.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitTable,,not-accessible,,current,,Stacking configuration unit table. .1.3.6.1.4.1.1991.1.1.3.31.2.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitEntry,,not-accessible,snStackingConfigUnitIndex,current,,An entry in the stacking configuration table. .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitIndex,Integer32,not-accessible,,current,,The stacking unit Id .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitPriority,Integer32,read-write,,current,,The priority in Active/backup eclection. -.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConfigStackPort,Integer32,read-write,,current,,The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking ports. Enter zero to remove the configured stacking port. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConfigStackPort,Integer32,read-write,,deprecated,,The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking ports. Enter zero to remove the configured stacking port. Note that this object is deprecated from FI8090 because the default ports are no longer supported. Use snStackingConfigUnitStackPort1 or snStackingConfigUnitStackPort2 for stack ports. Thus, the value of this object is one of stack port or zero for backup capability. .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitType,OCTET,read-only,,current,,A description of the configured/active system type for each unit. .1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitState,INTEGER,read-only,,current,local(1):remote(2):reserved(3):empty(4),A state for each unit -.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackPort1,Integer32,read-only,,current,,First stack port for each unit. It returns 0 if stack port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackPort2,Integer32,read-only,,current,,Second stack port for each unit. It returns 0 if stack port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConnectPort1,Integer32,read-write,,current,,First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConnectPort2,Integer32,read-write,,current,,second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackPort1,Integer32,read-write,,current,,A stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on an unit is 2. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackPort2,Integer32,read-write,,current,,Other one stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on an unit is 2. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConnectPort1,Integer32,read-write,,deprecated,,First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. Note that this object is deprecated from FI8090. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitConnectPort2,Integer32,read-write,,deprecated,,second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist. Note that this object is deprecated from FI8090. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.11,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackTrunk1,OCTET,read-write,,current,,A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist. Entering empty octet string means to delete this stack trunk. Note that the maximum stack trunk on an unit is 2. Each stack trunk contains up to 16 ports. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.12,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitStackTrunk2,OCTET,read-write,,current,,A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist. Entering empty octet string means to delete this stack trunk. Note that the maximum stack trunk on an unit is 2. Each stack trunk contains up to 16 ports. +.1.3.6.1.4.1.1991.1.1.3.31.2.1.1.13,FOUNDRY-SN-STACKING-MIB::snStackingConfigUnitName,OCTET,read-write,,current,,A name description of stacking unit. .1.3.6.1.4.1.1991.1.1.3.31.2.2,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitTable,,not-accessible,,current,,Stacking operation unit table. .1.3.6.1.4.1.1991.1.1.3.31.2.2.1,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitEntry,,not-accessible,snStackingOperUnitIndex,current,,An entry in the stacking operation table. .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitIndex,Integer32,not-accessible,,current,,The stacking unit Id @@ -4512,34 +4487,34 @@ .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitStackPort1State,INTEGER,read-only,,current,other(1):up(2):down(3),The first stack port state for each unit. .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitStackPort2,Integer32,read-only,,current,,Second stack port for each unit. It returns 0 if stack port does not exist. .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitStackPort2State,INTEGER,read-only,,current,other(1):up(2):down(3),The second stack port state for each unit. -.1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitNeighbor1,Integer32,read-only,,current,,Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. -.1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitNeighbor2,Integer32,read-only,,current,,Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. +.1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitNeighbor1,Integer32,read-only,,current,,Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. +.1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitNeighbor2,Integer32,read-only,,current,,Stacking neighbor unit (right) number. If there is no neighbor unit, then it returns 0. .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitImgVer,OCTET,read-only,,current,,The version of the running software image .1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14,FOUNDRY-SN-STACKING-MIB::snStackingOperUnitBuildlVer,OCTET,read-only,,current,,The version of the running software build -.1.3.6.1.4.1.1991.1.1.3.31.2.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkTable,,not-accessible,,current,,Stacking configuration stack trunk table. -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkEntry,,not-accessible,snStackingConfigStackTrunkUnit:snStackingConfigStackTrunkPort1:snStackingConfigStackTrunkPort2,current,,An entry in the stacking configuration Stack trunk table. -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkUnit,Integer32,not-accessible,,current,,The stacking unit Id -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkPort1,Integer32,not-accessible,,current,,The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkPort2,Integer32,not-accessible,,current,,The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkNumPort1,Integer32,read-only,,current,, Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkNumPort2,Integer32,read-only,,current,, Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. -.1.3.6.1.4.1.1991.1.1.3.31.2.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortTable,,not-accessible,,current,,Stacking configuration peripheral port table. -.1.3.6.1.4.1.1991.1.1.3.31.2.4.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortEntry,,not-accessible,snStackingConfigPeriPortUnit:snStackingConfigPeriPortPort,current,,An entry in the stacking configuration peripheral port table. -.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortUnit,Integer32,not-accessible,,current,,The stacking unit Id -.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortPort,Integer32,not-accessible,,current,,The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. -.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.1.3.31.2.5,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkTable,,not-accessible,,current,,Stacking configuration peripheral trunk table. -.1.3.6.1.4.1.1991.1.1.3.31.2.5.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkEntry,,not-accessible,snStackingConfigPeriTrunkUnit:snStackingConfigPeriTrunkPort1:snStackingConfigPeriTrunkPort2,current,,An entry in the stacking configuration peripheral trunk table. -.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkUnit,Integer32,not-accessible,,current,,The stacking unit Id -.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkPort1,Integer32,not-accessible,,current,,The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. -.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkPort2,Integer32,not-accessible,,current,,The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. +.1.3.6.1.4.1.1991.1.1.3.31.2.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkTable,,not-accessible,,deprecated,,Stacking configuration stack trunk table. +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkEntry,,not-accessible,snStackingConfigStackTrunkUnit:snStackingConfigStackTrunkPort1:snStackingConfigStackTrunkPort2,deprecated,,An entry in the stacking configuration Stack trunk table. +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkUnit,Integer32,not-accessible,,deprecated,,The stacking unit Id +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkPort1,Integer32,not-accessible,,deprecated,,The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkPort2,Integer32,not-accessible,,deprecated,,The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkNumPort1,Integer32,read-only,,deprecated,, Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. +.1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6,FOUNDRY-SN-STACKING-MIB::snStackingConfigStackTrunkNumPort2,Integer32,read-only,,deprecated,, Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist. +.1.3.6.1.4.1.1991.1.1.3.31.2.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortTable,,not-accessible,,deprecated,,Stacking configuration peripheral port table. +.1.3.6.1.4.1.1991.1.1.3.31.2.4.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortEntry,,not-accessible,snStackingConfigPeriPortUnit:snStackingConfigPeriPortPort,deprecated,,An entry in the stacking configuration peripheral port table. +.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortUnit,Integer32,not-accessible,,deprecated,,The stacking unit Id +.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortPort,Integer32,not-accessible,,deprecated,,The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. +.1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriPortRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.31.2.5,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkTable,,not-accessible,,deprecated,,Stacking configuration peripheral trunk table. +.1.3.6.1.4.1.1991.1.1.3.31.2.5.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkEntry,,not-accessible,snStackingConfigPeriTrunkUnit:snStackingConfigPeriTrunkPort1:snStackingConfigPeriTrunkPort2,deprecated,,An entry in the stacking configuration peripheral trunk table. +.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkUnit,Integer32,not-accessible,,deprecated,,The stacking unit Id +.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkPort1,Integer32,not-accessible,,deprecated,,The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. +.1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkPort2,Integer32,not-accessible,,deprecated,,The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. .1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4,FOUNDRY-SN-STACKING-MIB::snStackingConfigPeriTrunkRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.1.3.31.2.6,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortTable,,not-accessible,,current,,Stacking neighbor port table. .1.3.6.1.4.1.1991.1.1.3.31.2.6.1,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortEntry,,not-accessible,snStackingNeighborPortUnit:snStackingNeighborPortStackPort,current,,An entry in the stacking neighborport table. .1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortUnit,Integer32,not-accessible,,current,,The stacking unit Id -.1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortStackPort,Integer32,not-accessible,,current,,The IfIndex for the stack port on this unit. It is up to ten stack ports and peripheral ports per unit. -.1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortNeighborPort,Integer32,read-only,,current,,The IfIndex for the neighbor port of the stack port on this unit. It returns 0 if neighbor port does not exist for this stack port. +.1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortStackPort,Integer32,not-accessible,,current,,The IfIndex for the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk. +.1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3,FOUNDRY-SN-STACKING-MIB::snStackingNeighborPortNeighborPort,Integer32,read-only,,current,,The IfIndex for the neighbor port of the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk on the neighbor unit. It returns 0 if neighbor port does not exist for this stack port. .1.3.6.1.4.1.1991.1.1.3.32,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryMacVlanMIB,,,,,, .1.3.6.1.4.1.1991.1.1.3.32.1,FOUNDRY-MAC-VLAN-MIB::fdryMacVlanGlobalObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.32.1.1,FOUNDRY-MAC-VLAN-MIB::fdryMacVlanGlobalClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears the operational MAC-based VLAN information for all ports. @@ -4563,28 +4538,28 @@ .1.3.6.1.4.1.1991.1.1.3.32.2.3.1.2,FOUNDRY-MAC-VLAN-MIB::fdryMacBasedVlanMac,OCTET,not-accessible,,current,,A host source MAC address to be authenticated. .1.3.6.1.4.1.1991.1.1.3.32.2.3.1.3,FOUNDRY-MAC-VLAN-MIB::fdryMacBasedVlanPriority,Integer32,read-create,,current,,The priority of the source MAC address. .1.3.6.1.4.1.1991.1.1.3.32.2.3.1.4,FOUNDRY-MAC-VLAN-MIB::fdryMacBasedVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the table. -.1.3.6.1.4.1.1991.1.1.3.33,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryLinkAggregationGroupMIB,,,,,, -.1.3.6.1.4.1.1991.1.1.3.33.0,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupNotifyObjects,,,,,, -.1.3.6.1.4.1.1991.1.1.3.33.0.1,FOUNDRY-LAG-MIB::fdryLAGName,OCTET,accessible-for-notify,,current,,Name of a LinkAggregationGroup. +.1.3.6.1.4.1.1991.1.1.3.33,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupMIB,,,,,, Management Information Base module for link aggregate group configuration and statistics. Link aggregation group is a new concept of trunk and this MIB is replacing FOUNDRY-SN-LAG-MIB in MLX/XMR products starting release 4.1.0. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.3.33.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupTableObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.33.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupTable,,not-accessible,,current,,LinkAggregationGroup table. .1.3.6.1.4.1.1991.1.1.3.33.1.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupEntry,,not-accessible,fdryLinkAggregationGroupName,current,,An entry of the Link Aggregate Group table. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupName,OCTET,not-accessible,,current,,Name of a LinkAggregationGroup. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.2,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupType,INTEGER,read-create,,current,static(1):dynamic(2):keepalive(3),LinkAggregationGroup type. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.3,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupAdminStatus,INTEGER,read-create,,current,deploy(1):deployPassive(2):undeploy(3):undeployForced(4),The desired deplyed state of this LinkAggregationGroup entry. This is not the operational status. Refer to ifTable for the operational status. deploy(1).............deploy the LAG and set to LACP active if dynamic LAG. deployPassive(2)..deploy the LAG and set to LACP passive if dynamic LAG. undeploy(3).........undeploy the LAG if no more than 2 ports are enabled. undeployForced(4)..undeploy the LAG regardless number of ports enabled. This is a write-only value. In particular, a row cannot be deployed until the corresponding instances of fdryLinkAggregationGroupIfList has been set. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupName,OCTET,read-create,,current,,Name of a LinkAggregationGroup. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.2,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupType,INTEGER,read-create,,current,static(1):dynamic(2):keepalive(3):auto(4):spx(5),LinkAggregationGroup type. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.3,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupAdminStatus,INTEGER,read-create,,deprecated,deploy(1):deployPassive(2):undeploy(3):undeployForced(4):other(5),The desired deplyed state of this LinkAggregationGroup entry. This is not the operational status. Refer to ifTable for the operational status. deploy(1).............deploy the LAG and set to LACP active if dynamic LAG. deployPassive(2)..deploy the LAG and set to LACP passive if dynamic LAG. undeploy(3).........undeploy the LAG if no more than 2 ports are enabled. undeployForced(4)..undeploy the LAG regardless number of ports enabled. This is a write-only value. other(5)..................FI products will not support LAG deploy option. This is a write-only value. In particular, a row cannot be deployed until the corresponding instances of fdryLinkAggregationGroupIfList has been set. .1.3.6.1.4.1.1991.1.1.3.33.1.1.1.4,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupIfList,OCTET,read-create,,current,,A list of interface indices which are the port membership of a trunk group. Each interface index is a 32-bit integer in big endian order. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.5,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPrimaryPort,Integer32,read-create,,current,,The primary port for the Link Aggregation Group. This must be set before deploying the LinkAggregateGroup unless this is a keepalive LinkAggregateGroup. Zero will be returned for primary ports not set -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.6,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupTrunkType,INTEGER,read-create,,current,hashBased(1):perPacket(2),The trunk connection type which specifies what the scheme of load-sharing among the trunk ports is. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.5,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPrimaryPort,Integer32,read-create,,deprecated,,The primary port for the Link Aggregation Group. This must be set before deploying the LinkAggregateGroup unless this is a keepalive LinkAggregateGroup. Zero will be returned for primary ports not set. This object will not be used in FI products from 8.0.61 onwards +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.6,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupTrunkType,INTEGER,read-create,,current,hashBased(1):perPacket(2):resilient-hash(3),The trunk connection type which specifies what the scheme of load-sharing among the trunk ports is. Supported only on SWDR & TNTO platforms. .1.3.6.1.4.1.1991.1.1.3.33.1.1.1.7,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupTrunkThreshold,Unsigned32,read-create,,current,,The number of UP ports needed to keep the trunk up. Not applicable for keepalive LAG. .1.3.6.1.4.1.1991.1.1.3.33.1.1.1.8,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpTimeout,INTEGER,read-create,,current,default(1):long(2):short(3),The LACP timeout value this LACP LAG will use. Applicable for dynamic and keepalive LAG only. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.9,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupIfIndex,Integer32,read-only,,current,,After deployment the operation information of a LAG entry will be represented in an entry in ifTable. Use this variable as the ifIndex to access the entry in ifTable and ifXTable. Zero will be returned for LAGs not yet deployed. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.9,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupIfIndex,Integer32,read-only,,current,,After deployment the operation information of a LAG entry will be represented in an entry in ifTable. Use this variable as the ifIndex to access the entry in ifTable and ifXTable. Zero will be returned for LAGs not yet deployed. .1.3.6.1.4.1.1991.1.1.3.33.1.1.1.10,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortCount,Unsigned32,read-only,,current,,The number of member ports belong to this LAG. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.11,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. createAndWait(5) is not supported. To create a row in this table, a manager must set this object to createAndGo(4) together with the setting of fdryLinkAggregationGroupType. After that the row status becomes active(1) regardless the LAG entry is deployed or not. To deploy the LAG entry, set the corresponding instance of fdryLinkAggregationGroupAdminStatus to deployActive or deployPassive. -.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.12,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupId,Unsigned32,read-only,,current,,The numeric identifier assigned to this LAG. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.11,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Only createAndGo (4) & destroy(6) is supported. To create a row in this table, a manager must set this object to createAndGo(4) together with the setting of fdryLinkAggregationGroupType. fdryLinkAggregationGroupId is optional. After that the row status becomes active(1) regardless the LAG entry is deployed or not. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.12,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupId,Unsigned32,read-write,,current,,The numeric identifier assigned to this LAG. +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.13,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpMode,Unsigned32,read-write,,current,,The LACP mode value this LAG will use. Applicable for dynamic and keepalive LAG only. 0- lacp mode not supported 1- lacp mode active 2- lacp mode passive for static and spx lag lacp mode will be 0 +.1.3.6.1.4.1.1991.1.1.3.33.1.1.1.14,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLagMac,OCTET,read-write,,current,,MAC Address assigned for LAG interface. Format of mac address will be HHHH.HHHH.HHHH. .1.3.6.1.4.1.1991.1.1.3.33.2,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortTableObjects,,,,,, -.1.3.6.1.4.1.1991.1.1.3.33.2.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortTable,,not-accessible,,current,,A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. -.1.3.6.1.4.1.1991.1.1.3.33.2.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortEntry,,not-accessible,fdryLinkAggregationGroupName:ifIndex,current,,An entry of the Link Aggregate Group Port table. -.1.3.6.1.4.1.1991.1.1.3.33.2.1.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortLacpPriority,INTEGER,read-write,,current,,The LACP priority value assigned to this link aggregation port. Applicable for dynamic and keepalive LAG only. DEFVAL { 1 } +.1.3.6.1.4.1.1991.1.1.3.33.2.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortTable,,not-accessible,,deprecated,,A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. +.1.3.6.1.4.1.1991.1.1.3.33.2.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortEntry,,not-accessible,fdryLinkAggregationGroupName:ifIndex,deprecated,,An entry of the Link Aggregate Group Port table. +.1.3.6.1.4.1.1991.1.1.3.33.2.1.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupPortLacpPriority,INTEGER,read-write,,deprecated,,The LACP priority value assigned to this link aggregation port. Applicable for dynamic and keepalive LAG only. DEFVAL { 1 } .1.3.6.1.4.1.1991.1.1.3.33.3,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortTableObjects,,,,,, .1.3.6.1.4.1.1991.1.1.3.33.3.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortTable,,not-accessible,,current,,A table that contains Link Aggregation Control information about every LACP port associated with this device. A row appears in this table for each physical port. .1.3.6.1.4.1.1991.1.1.3.33.3.1.1,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortEntry,,not-accessible,fdryLinkAggregationGroupName:ifIndex,current,,An entry of the Link Aggregate Group LACP Port table. Applicable for dynamic and keepalive LAG only. @@ -4595,12 +4570,12 @@ .1.3.6.1.4.1.1991.1.1.3.33.3.1.1.5,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortLacpKey,INTEGER,read-only,,current,,The LACP key ID of the interface. .1.3.6.1.4.1.1991.1.1.3.33.3.1.1.6,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortLacpRemoteSysID,OCTET,read-only,,current,,The LACP remote system ID of the LAG. .1.3.6.1.4.1.1991.1.1.3.33.3.1.1.7,FOUNDRY-LAG-MIB::fdryLinkAggregationGroupLacpPortLacpRemoteKey,INTEGER,read-only,,current,,The LACP remote key ID of the interface. -.1.3.6.1.4.1.1991.1.1.3.34,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryDns2MIB,,,,,, +.1.3.6.1.4.1.1991.1.1.3.34,FDRY-DNS2-MIB::fdryDns2MIB,,,,,,The Ruckus Wireless proprietary MIB module for Domain Name Service(DNS) It has new IPv4/IPv6 combined tables for Domain Name Service Address List and Name configuration. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.3.34.1,FDRY-DNS2-MIB::fdryDns2DomainName,,,,,, .1.3.6.1.4.1.1991.1.1.3.34.1.1,FDRY-DNS2-MIB::fdryDns2DomainNameTable,,not-accessible,,current,,Domain Name Service domain name table. .1.3.6.1.4.1.1991.1.1.3.34.1.1.1,FDRY-DNS2-MIB::fdryDns2DomainNameEntry,,not-accessible,fdryDns2DomainNameIndex,current,,An entry in the DNS domain name table. .1.3.6.1.4.1.1991.1.1.3.34.1.1.1.1,FDRY-DNS2-MIB::fdryDns2DomainNameIndex,Unsigned32,not-accessible,,current,,The index to the DNS name table. -.1.3.6.1.4.1.1991.1.1.3.34.1.1.1.2,FDRY-DNS2-MIB::fdryDns2DomainNameAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),DNS IP address Type. Supported address types are ipv4(1) and ipv6(2) DEFVAL { ipv4 } +.1.3.6.1.4.1.1991.1.1.3.34.1.1.1.2,FDRY-DNS2-MIB::fdryDns2DomainNameAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),DNS IP address Type. Supported address types are ipv4(1) and ipv6(2) Note: from FI9000, the address type is not needed. This table represents a list for DNS domain names DEFVAL { ipv4 } .1.3.6.1.4.1.1991.1.1.3.34.1.1.1.3,FDRY-DNS2-MIB::fdryDns2DomainNameName,OCTET,read-create,,current,,Domain Name Service Domain Name string. .1.3.6.1.4.1.1991.1.1.3.34.1.1.1.4,FDRY-DNS2-MIB::fdryDns2DomainNameRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. .1.3.6.1.4.1.1991.1.1.3.34.2,FDRY-DNS2-MIB::fdryDnsServer,,,,,, @@ -4610,7 +4585,7 @@ .1.3.6.1.4.1.1991.1.1.3.34.2.1.1.2,FDRY-DNS2-MIB::fdryDnsServerIndex,Unsigned32,not-accessible,,current,,The index to the DNS server table. Currently, up to 4 DNS server entries each are supported for IPv4 and IPv6. .1.3.6.1.4.1.1991.1.1.3.34.2.1.1.3,FDRY-DNS2-MIB::fdryDnsServerAddr,OCTET,read-create,,current,,DNS server IP address. .1.3.6.1.4.1.1991.1.1.3.34.2.1.1.4,FDRY-DNS2-MIB::fdryDnsServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. -.1.3.6.1.4.1.1991.1.1.3.35,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryDaiMIB,,,,,, +.1.3.6.1.4.1.1991.1.1.3.35,FDRY-DAI-MIB::fdryDaiMIB,,,,,,Management Information for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which validates all ARP packets in a subnet and discard those packets with invalid IP to MAC address bindings. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. .1.3.6.1.4.1.1991.1.1.3.35.1,FDRY-DAI-MIB::fdryDaiVlan,,,,,, .1.3.6.1.4.1.1991.1.1.3.35.1.1,FDRY-DAI-MIB::fdryDaiVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. .1.3.6.1.4.1.1991.1.1.3.35.1.1.1,FDRY-DAI-MIB::fdryDaiVlanConfigEntry,,not-accessible,fdryDaiVlanVLanId,current,,A row instance contains the configuration to enable or disable Dynamic ARP Inspection at the existing VLAN. @@ -4619,9 +4594,9 @@ .1.3.6.1.4.1.1991.1.1.3.35.2,FDRY-DAI-MIB::fdryDaiInterface,,,,,, .1.3.6.1.4.1.1991.1.1.3.35.2.1,FDRY-DAI-MIB::fdryDaiIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface. .1.3.6.1.4.1.1991.1.1.3.35.2.1.1,FDRY-DAI-MIB::fdryDaiIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable trust state for Dynamic ARP Inspection at each physical interface capable of this feature. -.1.3.6.1.4.1.1991.1.1.3.35.2.1.1.1,FDRY-DAI-MIB::fdryDaiIfTrustValue,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for Dynamic ARP Inspection. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets received on this interface will be subjected to ARP inspection. +.1.3.6.1.4.1.1991.1.1.3.35.2.1.1.1,FDRY-DAI-MIB::fdryDaiIfTrustValue,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for Dynamic ARP Inspection. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets received on this interface will be subjected to ARP inspection. .1.3.6.1.4.1.1991.1.1.3.35.3,FDRY-DAI-MIB::fdryDaiArpInspect,,,,,, -.1.3.6.1.4.1.1991.1.1.3.35.3.1,FDRY-DAI-MIB::fdryDaiArpInspectTable,,not-accessible,,current,,A table provides the mechanism to control Dynamic ARP Inspection entries. When an IP-MAC mapping entry is created in a device supporting this table, a corresponding entry of this table will be added. +.1.3.6.1.4.1.1991.1.1.3.35.3.1,FDRY-DAI-MIB::fdryDaiArpInspectTable,,not-accessible,,current,,A table provides the mechanism to control Dynamic ARP Inspection entries. When an IP-MAC mapping entry is created in a device supporting this table, a corresponding entry of this table will be added. .1.3.6.1.4.1.1991.1.1.3.35.3.1.1,FDRY-DAI-MIB::fdryDaiArpInspectEntry,,not-accessible,fdryDaiArpInspectIpAddr,current,,A row instance contains the configuration to map a device IP address with its MAC address. .1.3.6.1.4.1.1991.1.1.3.35.3.1.1.1,FDRY-DAI-MIB::fdryDaiArpInspectIpAddr,IpAddress,not-accessible,,current,,The device IP address. .1.3.6.1.4.1.1991.1.1.3.35.3.1.1.2,FDRY-DAI-MIB::fdryDaiArpInspectMacAddr,OCTET,read-create,,current,,The device MAC address. @@ -4630,44 +4605,53 @@ .1.3.6.1.4.1.1991.1.1.3.35.3.1.1.5,FDRY-DAI-MIB::fdryDaiArpInspectState,INTEGER,read-only,,current,other(1):valid(2):pend(3),The state of the ARP entry .1.3.6.1.4.1.1991.1.1.3.35.3.1.1.6,FDRY-DAI-MIB::fdryDaiArpInspectAge,Unsigned32,read-only,,current,,The timer of the ARP entry .1.3.6.1.4.1.1991.1.1.3.35.3.1.1.7,FDRY-DAI-MIB::fdryDaiArpInspectPort,OCTET,read-only,,current,,The port of the ARP entry -.1.3.6.1.4.1.1991.1.1.3.36,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryDhcpSnoopMIB,,,,,, +.1.3.6.1.4.1.1991.1.1.3.36,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopMIB,,,,,,Management Information for configuration of DHCP Snooping feature. DHCP Snooping is a security feature which enables the device to filter untrusted DHCP packets in a subnet. It can also stop unauthorized DHCP serves and prevent errors due to user mis-configuration servers. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. .1.3.6.1.4.1.1991.1.1.3.36.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopGlobalObjects,,,,,, -.1.3.6.1.4.1.1991.1.1.3.36.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopGlobalClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears all entries in the DHCP binding database. +.1.3.6.1.4.1.1991.1.1.3.36.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopGlobalClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears all entries in the DHCP binding database. .1.3.6.1.4.1.1991.1.1.3.36.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlan,,,,,, .1.3.6.1.4.1.1991.1.1.3.36.2.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control DHCP Snooping per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. .1.3.6.1.4.1.1991.1.1.3.36.2.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlanConfigEntry,,not-accessible,fdryDhcpSnoopVlanVLanId,current,,A row instance contains the configuration to enable or disable DHCP Snooping at the existing VLAN. .1.3.6.1.4.1.1991.1.1.3.36.2.1.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlanVLanId,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCP Snooping feature is configured. -.1.3.6.1.4.1.1991.1.1.3.36.2.1.1.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlanDhcpSnoopEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP Snooping is enabled in this VLAN. If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false', DHCP Snooping is disabled. +.1.3.6.1.4.1.1991.1.1.3.36.2.1.1.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopVlanDhcpSnoopEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP Snooping is enabled in this VLAN. If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false', DHCP Snooping is disabled. .1.3.6.1.4.1.1991.1.1.3.36.3,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopInterface,,,,,, .1.3.6.1.4.1.1991.1.1.3.36.3.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for DHCP Snooping purpose at each physical interface. .1.3.6.1.4.1.1991.1.1.3.36.3.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable trust state for DHCP Snooping at each physical interface capable of this feature. -.1.3.6.1.4.1.1991.1.1.3.36.3.1.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopIfTrustValue,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for DHCP Snooping. If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. DHCP packets received on this interface will be subjected to DHCP checks. +.1.3.6.1.4.1.1991.1.1.3.36.3.1.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopIfTrustValue,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for DHCP Snooping. If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. DHCP packets received on this interface will be subjected to DHCP checks. .1.3.6.1.4.1.1991.1.1.3.36.4,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind,,,,,, -.1.3.6.1.4.1.1991.1.1.3.36.4.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindTable,,not-accessible,,current,,A table provides the information of DHCP snooping binding database learnt by the device -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindEntry,,not-accessible,fdryDhcpSnoopBindIpAddr,current,,A row instance contains the information of DHCP snoonping entry. -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindIpAddr,IpAddress,not-accessible,,current,,The device IP address. -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindMacAddr,OCTET,read-only,,current,,The device MAC address. -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.3,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindType,INTEGER,read-only,,current,other(1):static(2):dynamic(3):inspect(4):dhcp(5):dynamicDhcp(6):staticDhcp(7):host(8),The type of the ARP entry -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.4,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindState,INTEGER,read-only,,current,other(1):valid(2):pend(3),The state of the ARP entry -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.5,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindPort,OCTET,read-only,,current,,The port of the ARP entry -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.6,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindVlanId,Unsigned32,read-only,,current,,This object indicates the VLAN number on which DHCP snooping feature is configured. -.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.7,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCP binding database. -.1.3.6.1.4.1.1991.1.1.3.37,FOUNDRY-SN-SWITCH-GROUP-MIB::fdryIpSrcGuardMIB,,,,,, +.1.3.6.1.4.1.1991.1.1.3.36.4.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindTable,,not-accessible,,obsolete,,A table provides the information of DHCP snooping binding database learnt by the device +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindEntry,,not-accessible,fdryDhcpSnoopBindIpAddr,obsolete,,A row instance contains the information of DHCP snoonping entry. +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindIpAddr,IpAddress,not-accessible,,obsolete,,The device IP address. +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindMacAddr,OCTET,read-only,,obsolete,,The device MAC address. +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.3,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindType,INTEGER,read-only,,obsolete,other(1):static(2):dynamic(3):inspect(4):dhcp(5):dynamicDhcp(6):staticDhcp(7):host(8),The type of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.4,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindState,INTEGER,read-only,,obsolete,other(1):valid(2):pend(3),The state of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.5,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindPort,OCTET,read-only,,obsolete,,The port of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.6,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindVlanId,Unsigned32,read-only,,obsolete,,This object indicates the VLAN number on which DHCP snooping feature is configured. +.1.3.6.1.4.1.1991.1.1.3.36.4.1.1.7,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBindClearOper,INTEGER,read-write,,obsolete,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCP binding database. +.1.3.6.1.4.1.1991.1.1.3.36.4.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2Table,,not-accessible,,current,,A table provides the information of DHCP snooping binding database learnt by the device +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2Entry,,not-accessible,fdryDhcpSnoopBind2MacAddr:fdryDhcpSnoopBind2VlanId,current,,A row instance contains the information of DHCP snoonping entry. +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.1,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2MacAddr,OCTET,not-accessible,,current,,The device MAC address. +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.2,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2VlanId,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCP snooping feature is configured. +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.3,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2IpAddr,IpAddress,read-only,,current,,The device IP address. +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.4,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2Type,INTEGER,read-only,,current,other(1):static(2):dynamic(3):inspect(4):dhcp(5):dynamicDhcp(6):staticDhcp(7):host(8),The type of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.5,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2State,INTEGER,read-only,,current,other(1):valid(2):pend(3),The state of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.6,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2Port,Integer32,read-only,,current,,The port of the ARP entry +.1.3.6.1.4.1.1991.1.1.3.36.4.2.1.7,FDRY-DHCP-SNOOPING-MIB::fdryDhcpSnoopBind2ClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCP binding database. +.1.3.6.1.4.1.1991.1.1.3.37,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardMIB,,,,,,Management Information for configuration of IP Source Guard feature. IP Source Guard is a security feature that restricts IP traffic on untrusted ports by filtering traffic based on the DHCP snooping binding database or manually configured IP source bindings. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. .1.3.6.1.4.1.1991.1.1.3.37.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardInterface,,,,,, -.1.3.6.1.4.1.1991.1.1.3.37.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure enabling or disabling IP Source Guard purpose at each physical interface. -.1.3.6.1.4.1.1991.1.1.3.37.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable IP Source Guard at each physical interface capable of this feature. -.1.3.6.1.4.1.1991.1.1.3.37.1.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether IP Source Guard is enabled at this interface. If this object is set to 'true', IP Source Guard is enabled. Traffic coming to this interface will be forwarded. If it is from the list of IP addresses obtained from DHCP snooping. Otherwise it is denied. If this object is set to 'false', IP Source Guard is disabled. +.1.3.6.1.4.1.1991.1.1.3.37.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure enabling or disabling IP Source Guard purpose at each physical interface. +.1.3.6.1.4.1.1991.1.1.3.37.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable IP Source Guard at each physical interface capable of this feature. +.1.3.6.1.4.1.1991.1.1.3.37.1.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardIfEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether IP Source Guard is enabled at this interface. If this object is set to 'true', IP Source Guard is enabled. Traffic coming to this interface will be forwarded. If it is from the list of IP addresses obtained from DHCP snooping. Otherwise it is denied. If this object is set to 'false', IP Source Guard is disabled. .1.3.6.1.4.1.1991.1.1.3.37.2,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlan,,,,,, -.1.3.6.1.4.1.1991.1.1.3.37.2.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to configure enabling or disabling IP Source Guard purpose per port per VLAN. -.1.3.6.1.4.1.1991.1.1.3.37.2.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanConfigEntry,,not-accessible,fdryIpSrcGuardPortVlanPortId:fdryIpSrcGuardPortVlanVlanId,current,,A row instance contains the configuration to enable or disable IP Source Guard per port per VLAN of this feature. +.1.3.6.1.4.1.1991.1.1.3.37.2.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to configure enabling or disabling IP Source Guard purpose per port per VLAN. +.1.3.6.1.4.1.1991.1.1.3.37.2.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanConfigEntry,,not-accessible,fdryIpSrcGuardPortVlanPortId:fdryIpSrcGuardPortVlanVlanId,current,,A row instance contains the configuration to enable or disable IP Source Guard per port per VLAN of this feature. .1.3.6.1.4.1.1991.1.1.3.37.2.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanPortId,Integer32,not-accessible,,current,,The ifIndex of the port for IP Source Guard purpose per port per VLAN. .1.3.6.1.4.1.1991.1.1.3.37.2.1.1.2,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanVlanId,Unsigned32,not-accessible,,current,,The number of VLAN for IP Source Guard purpose per port per VLAN. -.1.3.6.1.4.1.1991.1.1.3.37.2.1.1.3,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether IP Source Guard is enabled at this interface and this VLAN number. If this object is set to 'true', IP Source Guard per-port-per-VLAN is enabled. If this object is set to 'false', IP Source Guard per-port-per-VLAN is disabled. +.1.3.6.1.4.1.1991.1.1.3.37.2.1.1.3,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardPortVlanEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether IP Source Guard is enabled at this interface and this VLAN number. If this object is set to 'true', IP Source Guard per-port-per-VLAN is enabled. If this object is set to 'false', IP Source Guard per-port-per-VLAN is disabled. .1.3.6.1.4.1.1991.1.1.3.37.3,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBind,,,,,, -.1.3.6.1.4.1.1991.1.1.3.37.3.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindTable,,not-accessible,,current,,A table provides the information of IP addresses used IP Source Guard purpose at each physical interface with or without specific VLAN memberships -.1.3.6.1.4.1.1991.1.1.3.37.3.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindEntry,,not-accessible,ifIndex:fdryIpSrcGuardBindIpAddr,current,,A row instance contains IP address used for IP Source Guard purpose at each physical interface with or without specific VLAN memberships . +.1.3.6.1.4.1.1991.1.1.3.37.3.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindTable,,not-accessible,,current,,A table provides the information of IP addresses used IP Source Guard purpose at each physical interface with or without specific VLAN memberships +.1.3.6.1.4.1.1991.1.1.3.37.3.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindEntry,,not-accessible,ifIndex:fdryIpSrcGuardBindIpAddr,current,,A row instance contains IP address used for IP Source Guard purpose at each physical interface with or without specific VLAN memberships . .1.3.6.1.4.1.1991.1.1.3.37.3.1.1.1,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindIpAddr,IpAddress,not-accessible,,current,,The device IP address. -.1.3.6.1.4.1.1991.1.1.3.37.3.1.1.2,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindVlanId,Unsigned32,read-create,,current,,This object indicates the specific VLAN memberships on this interface. The VLAN number is optional. If you configure a VLAN number, the bindings applies to that VLAN only. If you do not configure a VLAN number, the static applies to all VLANs associated with the port. In this case, the VLAN number will be displayed as 0. +.1.3.6.1.4.1.1991.1.1.3.37.3.1.1.2,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindVlanId,Unsigned32,read-create,,current,,This object indicates the specific VLAN memberships on this interface. The VLAN number is optional. If you configure a VLAN number, the bindings applies to that VLAN only. If you do not configure a VLAN number, the static applies to all VLANs associated with the port. In this case, the VLAN number will be displayed as 0. .1.3.6.1.4.1.1991.1.1.3.37.3.1.1.3,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. .1.3.6.1.4.1.1991.1.1.3.37.3.1.1.4,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindMode,INTEGER,read-only,,current,other(1):active(2):inactive(3),The mode of the IP Source Guard entry .1.3.6.1.4.1.1991.1.1.3.37.3.1.1.5,FDRY-IP-SOURCE-GUARD-MIB::fdryIpSrcGuardBindType,INTEGER,read-only,,current,other(1):ip(2),The type of the IP Source Guard entry @@ -4820,7 +4804,527 @@ .1.3.6.1.4.1.1991.1.1.3.40.2.5.1.2,BROCADE-SPX-MIB::brcdSPXPEGroupPEGroup,OCTET,read-only,,current,,The name of IfIndex for the configured CB SPX port. It is an optional field .1.3.6.1.4.1.1991.1.1.3.40.2.5.1.3,BROCADE-SPX-MIB::brcdSPXPEGroupPEIdList,OCTET,read-only,,current,,A list of PE unit ID indices which are attached to a CB SPX port. .1.3.6.1.4.1.1991.1.1.3.40.2.5.1.4,BROCADE-SPX-MIB::brcdSPXPEGroupCBSPXEndPort,Integer32,read-only,,current,,The IfIndex for the CB SPX port which is connected to a group of PE units. This CB SPX port is at other end if it is a ring topology. It returns 0 if it is a chain topology and there is no the end port. -.1.3.6.1.4.1.1991.1.1.4,FOUNDRY-SN-ROOT-MIB::snL4,,,,,, +.1.3.6.1.4.1.1991.1.1.3.41,BROCADE-STACK-ISSU-MIB::brcdStackISSUMIB,,,,,, Management Information for Stack ISSU configuration and operational status. Supported Platforms: - supported on Ruckus Wireless ICX platforms. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.41.1,BROCADE-STACK-ISSU-MIB::brcdStackISSUGlobalObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.41.1.1,BROCADE-STACK-ISSU-MIB::brcdStackISSUGlobalUpgradeOption,INTEGER,read-write,,current,none(0):primary(1):secondary(2):primaryOnErrorReloadPrimary(3):primaryOnErrorReloadSecondary(4):secondaryOnErrorReloadPrimary(5):secondaryOnErrorReloadSecondary(6):abort(7),User configures the system upgrade option to initiate stack upgrade process using primary or secondary image. The set operation is allowed only on the active unit in stacking system or 802.1BR (SPX) system. none: reserve state. primary: system upgrade process using primary image secondary: system upgrade process using secondary image primaryOnErrorReloadPrimary: system upgrade process using primary image, reload from primary if upgrade fails primaryOnErrorReloadSecondary: system upgrade process using primary image, reload from secondary if upgrade fails secondaryOnErrorReloadPrimary: system upgrade process using secondary image, reload from primary if upgrade fails secondaryOnErrorReloadSecondary: system upgrade process using secondary image, reload from secondary if upgrade fails abort: abort upgarde process. A reload is required to bring the stack back to working condition after abort is issued. The default is none state +.1.3.6.1.4.1.1991.1.1.3.41.1.2,BROCADE-STACK-ISSU-MIB::brcdStackISSUGlobalUpgradeStatus,INTEGER,read-only,,current,notUpgrading(0):unitToBeUpgraded(1):unitJoin(2):unitVersionSync(3):unitReady(4):peUnitJoin(5):peUnitVersionSync(6):peUnitReady(7):standbyAssignment(8):standbySyncCompleted(9):stackSwitchover(10):stackSwitchoverCompleted(11):upgradeAbort(12):waitingForReload(13),The state of upgrade process for a stacking or SPX system The default state is in notUpgrading state +.1.3.6.1.4.1.1991.1.1.3.41.1.3,BROCADE-STACK-ISSU-MIB::brcdStackISSUGlobalUpgradeSystemReady,INTEGER,read-only,,current,notReadyUpgrade(0):ready(1),The per-upgrade state of a stacking or SPX system. The system must be in ready state before the upgrade process starts. It checks the following aspects: Topology is Ring Yes Standby Present Yes Standby ready for upgrade Yes Flash use in progress No Secure Setup in progress No ISSU in progress No Election in progress No All units in ready state Yes Primary Image is upgrade compatible Yes Secondary Image is upgrade compatible Yes Startup config and Running Config Same Yes Config mode conflict No If one of above check fails, then system is not ready for stack upgrade +.1.3.6.1.4.1.1991.1.1.3.41.1.4,BROCADE-STACK-ISSU-MIB::brcdStackISSUGlobalUpgradeError,OCTET,read-only,,current,,The error message of system upgrade process on a stacking or SPX system. The default is null string, which means system has no error or is in no-upgrade state +.1.3.6.1.4.1.1991.1.1.3.41.2,BROCADE-STACK-ISSU-MIB::brcdStackISSUTableObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.41.2.1,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitTable,,not-accessible,,current,,Stack ISSU status unit table. +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitEntry,,not-accessible,brcdStackISSUStatusUnitIndex,current,,An entry in the stack ISSU status table. +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1.1,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitIndex,Integer32,not-accessible,,current,,The unit Id. If it is a SPX system, CB unit ID is from 1 to 16. PE unit ID is from 17 to 56 +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1.2,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitSequence,Integer32,read-only,,current,,The sequence of upgrade in a stacking or SPX system. if unit is PE, the sequence number is the same as attached to the CB unit in a SPX system. The default is 0, which means system is in no-upgrade state +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1.3,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitType,OCTET,read-only,,current,,A description of the system type for each unit. +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1.4,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitRole,INTEGER,read-only,,current,other(1):active(2):standby(3):member(4):standalone(5):spxPe(6),A role for each unit +.1.3.6.1.4.1.1991.1.1.3.41.2.1.1.5,BROCADE-STACK-ISSU-MIB::brcdStackISSUStatusUnitStatus,INTEGER,read-only,,current,notUpgraded(0):upgrading(1):joined(2):versionSyncStart(3):versionSyncComplete(4):upgradeComplete(5):upgradeAbort(6):upgradePending(7),The status of upgrade for each unit. The default is in notUpgraded state +.1.3.6.1.4.1.1991.1.1.3.42,FOUNDRY-DHCPSERVER-MIB::snDhcpServer,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. +.1.3.6.1.4.1.1991.1.1.3.42.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerGlobalObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.42.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerGlobalConfigState,INTEGER,read-write,,current,disabled(0):enabled(1),Configure state for DHCPv4 server on the global level. enabled: DHCPv4 server is enabled disabled: DHCPv4 server is disabled Note: DHCPv4 client should be disabled when enabling DHCPv4 server +.1.3.6.1.4.1.1991.1.1.3.42.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerTableObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.42.2.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolConfigTable,,not-accessible,,current,,A table containing the configurations of dhcp server global pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolConfigEntry,,not-accessible,snDhcpServerPoolName,current,,An entry containing the objects for configuring the network ip or host ip etc. to global pools for DHCP server. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolName,OCTET,not-accessible,,current,,DHCP server global pool name. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolNetwork,IpAddress,read-write,,current,,Network ip of a DHCP global pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.3,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolNetworkMask,IpAddress,read-write,,current,,Net mask of a DHCP global pool(network). +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.4,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolStartAddr,IpAddress,read-write,,current,,Start IP of a DHCP global pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.5,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolEndAddr,IpAddress,read-write,,current,,End ip of a DHCP global pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.6,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolLeaseDay,Integer32,read-write,,current,,Number of days of the lease. DEFVAL { 1 } +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.7,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolLeaseHour,Integer32,read-write,,current,,Number of hours of the lease. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.8,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolLeaseMinute,Integer32,read-write,,current,,Number of minutes of the lease. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.9,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolDeploy,INTEGER,read-write,,current,nodeploy(0):deploy(1),Flag of undo operation for DHCPSrvGlobalPoolConfigTable. +.1.3.6.1.4.1.1991.1.1.3.42.2.1.1.10,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.42.2.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionConfigTable,,not-accessible,,current,,A table for configuring options to DHCP global pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionConfigEntry,,not-accessible,snDhcpServerPoolName:snDhcpServerPoolOptionCode,current,,An entry containing the objects for configuring options to DHCP global pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionCode,Integer32,not-accessible,,current,,Option code. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionType,INTEGER,read-create,,current,ascii(0):hex(1):ip(2):bool(3):integer(4):telephony(5):ipaddrpair(6):staticroute(7):slpdiragent(8):slpsrvscope(9):pxeintfid(10):pxeclientid(11),Option type. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.3,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionAscii,OCTET,read-create,,current,,Ascii string of an option. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.4,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionHexString,OCTET,read-create,,current,,Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.5,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionIPString,OCTET,read-create,,current,,Ip string of an option. 1 to 3 ip addresses can be configured at most simultaneously. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.6,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.7,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionBoolString,OCTET,read-create,,current,,Bool string of an option. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.8,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionIntString,OCTET,read-create,,current,,Int string of an option +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.9,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionIPAddrPairString,OCTET,read-create,,current,,Ip address pair (ip address & mask) string of option policy-filter(21).Two sets of destination address and subnet mask can be configured at most simultaneously. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.10,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionStaticRouteString,OCTET,read-create,,current,,Ip address pair (detination & route) string of option static-route(33). Two sets of destination address and static route of the destination address can be configured at most simultaneously. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.11,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionSlpDirAgentString,OCTET,read-create,,current,,This option specifies the location of one or more SLP Directory Agents. The SLP Directory Agent Option specifies a list of IP addresses for Directory Agents. Directory Agents MUST be listed in order of preference, if there is an order of preference. The first byte in the Directory Agent option may be set to either 0 or 1 (false or true). If it is set to 1, the SLP User Agent or Service Agent so configured MUST NOT employ either active or passive multicast discovery of Directory Agents. maximum of three SLP Directory Agents can be configured. The output of the object in the format 'false xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' or 'true xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.12,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionSlpSrvScopeString,OCTET,read-create,,current,,The scope list is a comma delimited list which indicates the scopes that a SLP Agent is configured to use. The first byte determines (0 or 1) whether SLP Agents override their static configuration for scopes with the string provided by the option. This allows DHCP administrators to implement a policy of assigning a set of scopes to Agents for service provision. If the Mandatory byte is 0, static configuration takes precedence over the DHCP provided scope list. If the Mandatory byte is 1, the provided in this option MUST be used by the SLP Agent. The maximum size of service scopes list is 128 bytes. The output of the object in the format 'false slp-agent1:slp-agent2:slp-agent3:..' or 'true slp-agent1:slp-agent2:slp-agent3:..' +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.13,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionPxeIntfIdString,OCTET,read-create,,current,,The object refers the value of PXE interface Id value. First Octet encodes a network interface type. For now the only supported value is 1 for Universal Network Device Interface (UNDI). second and third bytes describe the interface revision. +.1.3.6.1.4.1.1991.1.1.3.42.2.2.1.14,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolOptionPxeClientIdString,OCTET,read-create,,current,,The object refers the value of PXE client id string. First byte describes the type of the machine identifier in the remaining octets in this option. 0 (zero) is the only value defined for this octet at the present time, and it describes the remaining octets as a Globally Unique Identifier (GUID). The maximum size of client id string is 128 bytes. +.1.3.6.1.4.1.1991.1.1.3.42.2.3,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedSingleAddressTable,,not-accessible,,current,,A table for configuring single excluded address to DHCP server address pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.3.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedSingleAddressEntry,,not-accessible,snDhcpServerPoolName:snDhcpServerPoolExcludedAddressIndex,current,,An entry containing the objects for configuring single excluded address to DHCP server address pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.3.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedAddressIndex,Integer32,not-accessible,,current,,Excluded Address Index. +.1.3.6.1.4.1.1991.1.1.3.42.2.3.1.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedSingleAddress,IpAddress,read-create,,current,, Single address excluded from the address pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.3.1.3,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedSingleAddressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. +.1.3.6.1.4.1.1991.1.1.3.42.2.4,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedAddressRangeTable,,not-accessible,,current,,A table for configuring excluded address range to DHCP server address pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.4.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedAddressRangeEntry,,not-accessible,snDhcpServerPoolName:snDhcpServerPoolExcludedAddressRangeIndex,current,,An entry containing the objects for configuring excluded address and excluded address range to DHCP server address pools. +.1.3.6.1.4.1.1991.1.1.3.42.2.4.1.1,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedAddressRangeIndex,Integer32,not-accessible,,current,,Excluded address range index. +.1.3.6.1.4.1.1991.1.1.3.42.2.4.1.2,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedStartAddress,IpAddress,read-create,,current,,Start addresses of the excluded from the address pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.4.1.3,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedEndAddress,IpAddress,read-create,,current,,End addresses of the excluded from the address pool. +.1.3.6.1.4.1.1991.1.1.3.42.2.4.1.4,FOUNDRY-DHCPSERVER-MIB::snDhcpServerPoolExcludedAddressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. +.1.3.6.1.4.1.1991.1.1.3.43,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientMIB,,,,,,Management Information for discovering/querying the directly connected clients of Ruckus ICX Switches/Routers. The information consists of: 1. Device MAC/IPv4/IPv6 addresses 2. Port/VLAN information 3. User, if client is authenticated 4. Client usage statistics Copyright 1996-2019 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP MIB Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.43.0,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientNotify,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.0.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientConnectedNotify,,,,,,This notification is sent if a client is detected and/or authenticated. +.1.3.6.1.4.1.1991.1.1.3.43.0.2,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientDisconnectedNotify,,,,,,This notification is sent if client is deleted for reasons such as log-off or inactivity. +.1.3.6.1.4.1.1991.1.1.3.43.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.1.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClients,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientsTable,,not-accessible,,current,,A table providing information about the clients directly connected on all the ports in the Ruckus devices. When FlexAuth is enabled, this table contains entries for all the authenticated clients (success/failure). Entries get created when clients are authenticated and cleared when they logoff or timeout. When FlexAuth is not enabled, this table populates the entries with devices learned through LLDP/CDP, if LLDP/CDP is enabled. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientEntry,,not-accessible,ifIndex:ruckusWiredClientMac,current,,An entry containing information about a specific client on a given port +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientMac,OCTET,read-only,,current,,Specifies the MAC Address of the client (device/host) represented by this client entry +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.2,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientVlan,INTEGER,read-only,,current,,Specifies the VLAN, the client (device/host) belongs to, represented by this client entry. In case of voice-phones, this VLAN is the voice-VLAN (tagged) and in all other cases, likely it would be an untagged VLAN, unless it's a tagged VM client +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.3,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientType,INTEGER,read-only,,current,other(1):phone(2):wlanAP(3):router(4):bridge(5):cableDevice(6),Decribes the type of the client connnected on this port +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.4,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientAuthType,INTEGER,read-only,,current,none(1):dot1x(2):macAuth(3):webAuth(4),Specifies the authentication method that is used for authenticating the client on this port represented by this client (when FlexAuth is enabled). Otherwise, it's none. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.5,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientStatus,INTEGER,read-only,,current,noAuth(1):allowed(2):blocked(3):restricted(4):critical(5):guest(6),The authentication state of the client which can take the following values. noAuth - not authenticated allowed - client authentication is successful, so the complete access is granted blocked - client failed authentication, so access is denied restrict - client failed authentication, but allowed restricted access critical - client authentication timedout, so access is limited to critical operations guest - client is not Dot1x capable, so allowed guest role access +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.6,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientDescr,OCTET,read-only,,current,,Desribes the client as derived from LLDP/CDP device description for LLDP/CDP learned devices. Otherwise it's an empty string for now. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.7,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientUserName,OCTET,read-only,,current,,Specified the User name associated with the client, represented by this entry. It coule be username or MAC address, where user-name is not present and not applicable. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.8,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientV4Addr,OCTET,read-only,,current,,The IPv4 address of the client represented by this entry. A client can have both IPv4 and IPv6 addresses bound on dual-stack hosts. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.9,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientV6Addr,OCTET,read-only,,current,,The IPv6 address of the client represented by this entry. A client can have both IPv4 and IPv6 addresses bound on dual-stack hosts. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.10,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientUpTime,TimeTicks,read-only,,current,,Specifies the time the client had been up from the time the client entry is created in the Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.11,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientTxPkts,Counter64,read-only,,current,,The total number of packets transmitted on this port for this client. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.12,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientRxPkts,Counter64,read-only,,current,,The total number of packets received on this port for this client. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.13,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientTxOctets,Counter64,read-only,,current,,The total number of octets transmitted on this port for this client. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.14,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientRxOctets,Counter64,read-only,,current,,The total number of octets receivedon this port for this client. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.15,RUCKUS-WIRED-CLIENT-MIB::ruckusDhcpClientHostName,OCTET,read-only,,current,,Specified the Host name associated with the client, represented by this entry. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.16,RUCKUS-WIRED-CLIENT-MIB::ruckusDhcpClientDeviceTypeName,OCTET,read-only,,current,,Specified the Device type name (mobile,laptop) associated with theclient, represented by this entry. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.17,RUCKUS-WIRED-CLIENT-MIB::ruckusDhcpClientOsVendorName,OCTET,read-only,,current,,Specified the OS vendor name associated with the client, represented by this entry. +.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.18,RUCKUS-WIRED-CLIENT-MIB::ruckusDhcpClientModelName,OCTET,read-only,,current,,Specified the Device mode name associated with the client, represented by this entry. +.1.3.6.1.4.1.1991.1.1.3.43.2,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientConformance,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.2.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientMIBCompliances,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.2.1.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientCompliance,,,,,,The compliance statement for entities which implement RUCKUS-CLIENT-MIB. +.1.3.6.1.4.1.1991.1.1.3.43.2.2,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientMIBGroups,,,,,, +.1.3.6.1.4.1.1991.1.1.3.43.2.2.1,RUCKUS-WIRED-CLIENT-MIB::ruckusWiredClientGroup,,,,,,A collection of objects that provide client information for a specific client. +.1.3.6.1.4.1.1991.1.1.3.44,RUCKUS-AUTH-MIB::ruckusAuthMIB,,,,,,Management Information for configuration/querying of Flexible authentication which consists of 802.1X, MAC-Auth and Web-Auth. It is grouped into five MIBs - 1. Global level Auth configuration 2. Global level Dot1x configuration 3. Global level MacAuth configuration 4. Global level WebAuth configuration 5. Port level Auth configuration 6. Auth Session information 7. Auth Session Stats information 8. Dot1x Auth Session Stats information Copyright 1996-2019 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP MIB Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.44.0,RUCKUS-AUTH-MIB::ruckusAuthNotification,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.0.1,RUCKUS-AUTH-MIB::ruckusAuthPortAuthorizedNotif,,,,,,This notification is sent if a 802.1x supplicant is detected and authenticated successfully with supplicant getting assigned a VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.0.2,RUCKUS-AUTH-MIB::ruckusAuthPortUnauthorizedNotif,,,,,,This notification is sent if a 802.1x supplicant had logged off or session is cleared for other reasons. +.1.3.6.1.4.1.1991.1.1.3.44.0.3,RUCKUS-AUTH-MIB::ruckusAuthMacAuthorizedNotif,,,,,,This notification is sent if a non-802.1x client is detected and authenticated successfully with client/device getting assigned a VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.0.4,RUCKUS-AUTH-MIB::ruckusAuthMacUnauthorizedNotif,,,,,,This notification is sent if a non-802.1x client had logged off or session is cleared for other reasons. +.1.3.6.1.4.1.1991.1.1.3.44.0.5,RUCKUS-AUTH-MIB::ruckusAuthAclFailNotif,,,,,,This notification is sent if a an ACL counldn't be applied for authenticated client, resulting the client in authentication failure. +.1.3.6.1.4.1.1991.1.1.3.44.1,RUCKUS-AUTH-MIB::ruckusAuthObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.1,RUCKUS-AUTH-MIB::ruckusAuthConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.1.1,RUCKUS-AUTH-MIB::ruckusAuthDefaultVlan,INTEGER,read-only,,current,,This default VLAN is used to place all the FlexAuth enabled ports, so this VLAN acts as a VLAN for the clients to belong to, when authentication server doesn't assign any VLANs. A value of zero for this object indicates no default Vlan configured for this Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.2,RUCKUS-AUTH-MIB::ruckusAuthVoiceVlan,INTEGER,read-only,,current,,This voice VLAN is used to advertise through LLDP/CDP on the ports, when connected devices are detected as Phones and authentication server doesn't assign any Voice VLAN. A value of zero for this object indicates no Voice Vlan configured for this Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.3,RUCKUS-AUTH-MIB::ruckusAuthCriticalVlan,INTEGER,read-only,,current,,This VLAN is used to place the clients, when the authentication server times out and the timeout action is configired as 'critical', so the clients have limited access. Refer to ruckusAuthTimeoutAction object for timeout-action choices. A value of zero for this object indicates no Critical Vlan configured for this Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.4,RUCKUS-AUTH-MIB::ruckusAuthRestrictVlan,INTEGER,read-only,,current,,This VLAN is used to place the clients, when the clients fail the authentication and the failure action is configured as 'restrict', so the clients have limited access. Refer to ruckusAuthFailAction object for fail-action choices. A value of zero for this object indicates no Restrict Vlan configured for this Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.5,RUCKUS-AUTH-MIB::ruckusAuthEnable,BITS,read-only,,current,dot1x(0):macAuth(1),Specifies, which authentication methods are enabled globally. Unless the method is enabled globally, the same can't be enabled at port level. A bit field of '1' indicates enabled, otherwise disabled. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.6,RUCKUS-AUTH-MIB::ruckusAuthMode,INTEGER,read-only,,current,singleUntagged(1):multipleUntagged(2):singleHost(3):multipleHosts(4),Specifies the authentication mode for all the FlexAuth enabled ports. DEFVAL { singleUntagged } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.7,RUCKUS-AUTH-MIB::ruckusAuthMethods,INTEGER,read-only,,current,dot1xMauth(1):mauthDot1x(2),Specifies which authentication methods to be attempted in series of methods for all FlexAuth enabled ports. DEFVAL { dot1xMauth } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.8,RUCKUS-AUTH-MIB::ruckusAuthMaxSessions,Unsigned32,read-only,,current,,Specifies the maximum number of authenticated clients allowed on a port. This doesn't include the clients allowed due to authentication failure and timeout policies. DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.9,RUCKUS-AUTH-MIB::ruckusAuthFailAction,INTEGER,read-only,,current,blockTraffic(1):restrictVlan(2),Specifies the action to be taken, when the clients fail the authentication. DEFVAL { blockTraffic } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.10,RUCKUS-AUTH-MIB::ruckusAuthTimeoutAction,INTEGER,read-only,,current,failure(1):success(2):criticalVlan(3):other(4),Specifies the action to be taken, when the authentication server times out. DEFVAL { other } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.11,RUCKUS-AUTH-MIB::ruckusAuthReauthEnable,INTEGER,read-only,,current,enabled(1):disabled(2),The reauthentication control for all the FlexAuth enabled ports. Setting this object to 'enabled' causes every FlexAuth enabled port to reauthenticate the devices connecting to the port, after every period of time specified by the object ruckusAuthReauthPeriod. Setting this object to 'disabled' disables the reauthentication. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.12,RUCKUS-AUTH-MIB::ruckusAuthReauthPeriod,Unsigned32,read-only,,current,,How often to re-authenticates clients, when periodic re-authentication is enabled. DEFVAL { 3600 } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.13,RUCKUS-AUTH-MIB::ruckusAuthReauthTimeout,Unsigned32,read-only,,current,,How often to re-authenticates clients, when the clients were allowed due to authentication server timeout. Value of 0 disables the re-authentication. DEFVAL { 300 } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.14,RUCKUS-AUTH-MIB::ruckusAuthIdleTimeout,Unsigned32,read-only,,current,,Specifies the time to keep the sessions in the Ruckus device, after the inactivity detection time expired in the hardware. If the clients start the traffic in this time, they need not authenticate again, otherwise they would have to authenticate, once the session gets deleted. This can be set from authentication server for each client and value of 0 is allowed to disable the aging. DEFVAL { 120 } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.15,RUCKUS-AUTH-MIB::ruckusAuthDeniedTimeout,Unsigned32,read-only,,current,,Specifies the time to keep the denied sessions in the Ruckus device for the clients which are blocked as they failed authentication. When the clients start the traffic again, they will be authenticated. DEFVAL { 70 } +.1.3.6.1.4.1.1991.1.1.3.44.1.1.16,RUCKUS-AUTH-MIB::ruckusAuthAging,BITS,read-only,,current,deniedSessions(0):permittedSessions(1),Specifies, if denied and permitted sessions are enabled or disabled for aging. Aging is enabled by default. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.17,RUCKUS-AUTH-MIB::ruckusAuthDefaultV4IngressAcl,OCTET,read-only,,current,,Specifies the default User Access List (ACL) applied in the Ingress direction for the IPv4 traffic for sessins when ACLs are not dynamically assigned through RADIUS. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.18,RUCKUS-AUTH-MIB::ruckusAuthDefaultV4EgressAcl,OCTET,read-only,,current,,Specifies the default User Access List (ACL) applied in the Egress direction for the IPv4 traffic for sessins when ACLs are not dynamically assigned through RADIUS. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.19,RUCKUS-AUTH-MIB::ruckusAuthDefaultV6IngressAcl,OCTET,read-only,,current,,Specifies the default User Access List (ACL) applied in the Ingress direction for the IPv6 traffic for sessins when ACLs are not dynamically assigned through RADIUS. +.1.3.6.1.4.1.1991.1.1.3.44.1.1.20,RUCKUS-AUTH-MIB::ruckusAuthDefaultV6EgressAcl,OCTET,read-only,,current,,Specifies the default User Access List (ACL) applied in the Egress direction for the IPv6 traffic for sessins when ACLs are not dynamically assigned through RADIUS. +.1.3.6.1.4.1.1991.1.1.3.44.1.2,RUCKUS-AUTH-MIB::ruckusDot1xAuthConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.2.1,RUCKUS-AUTH-MIB::ruckusDot1xQuietPeriod,Unsigned32,read-only,,current,,When the Ruckus device is unable to authenticate the Client, the amount of time the Ruckus device waits before trying again. DEFVAL { 60 } +.1.3.6.1.4.1.1991.1.1.3.44.1.2.2,RUCKUS-AUTH-MIB::ruckusDot1xTxPeriod,Unsigned32,read-only,,current,,When a Client does not send back an EAP(Extensible Authentication Protocol)- response/identity frame, the amount of time the Ruckus device waits before retransmitting the EAP-request/identity frame to the Client. DEFVAL { 30 } +.1.3.6.1.4.1.1991.1.1.3.44.1.2.3,RUCKUS-AUTH-MIB::ruckusDot1xSuppTimeout,Unsigned32,read-only,,current,,When a supplicant (Client) does not respond to an EAP-request frame, the amount of time before the Ruckus device retransmits the frame. DEFVAL { 30 } +.1.3.6.1.4.1.1991.1.1.3.44.1.2.4,RUCKUS-AUTH-MIB::ruckusDot1xMaxReq,Unsigned32,read-only,,current,,The number of times the Ruckus device retransmits an EAP-request/identity request frame if it does not receive an EAP-response/identity response frame from the Client. DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.44.1.2.5,RUCKUS-AUTH-MIB::ruckusDot1xMaxReauthReq,Unsigned32,read-only,,current,,The number of re-authentication attempts that are permitted before the port becomes Unauthorized. DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.44.1.2.6,RUCKUS-AUTH-MIB::ruckusDot1xGuestVlan,INTEGER,read-only,,current,,This VLAN is used to place the clients, when the supplicant/client times out as it's not capable of IEEE-802.1X authentication protocol. A value of zero for this object indicates no Guest Vlan configured for the interface. +.1.3.6.1.4.1.1991.1.1.3.44.1.2.7,RUCKUS-AUTH-MIB::ruckusDot1xMacAuthOverride,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if the MAC-Authentication should be tried next when a client fails authentication with Dot1x authentication method. This may be required when devices are Dot1x capable, but authentication server is not configured with user profiles, instead it's configured with device profiles, so MAC-Authentication can succeed. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.3,RUCKUS-AUTH-MIB::ruckusMacAuthConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.3.1,RUCKUS-AUTH-MIB::ruckusMacAuthPasswordFormat,INTEGER,read-only,,current,dashFormat(1):colonFormat(2):dotFormat(3):normalFormat(4),Specifies the format to be used for MAC address, which is used as credential in MAC-authentication. As MAC addresses are represented in different formats, all such formats are supported as given in options above. dashFormat(1): username/password gets formatted as xx-xx-xx-xx-xx-xx colonFormat(2): username/password gets formatted as xx:xx:xx:xx:xxxx dotFormat(3): username/password gets formatted as xxxx.xxxx.xxxx normalFormat(4):username/password gets formatted as xxxxxxxxxxxx DEFVAL { normalFormat } +.1.3.6.1.4.1.1991.1.1.3.44.1.3.2,RUCKUS-AUTH-MIB::ruckusMacAuthPasswordOverride,OCTET,read-only,,current,,Specifies the password to be used for all MAC- authentication clients. This is normally of 0 length string, which means the client MAC address is used as the password. +.1.3.6.1.4.1.1991.1.1.3.44.1.3.3,RUCKUS-AUTH-MIB::ruckusMacAuthDot1xOverride,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if the Dot1x should be tried next when a client fails authentication with MAC-Authentication method. This may be required when devices are Dot1x capable, authentication order is MAC-Auth followed by Dot1x, and authentication server is not configured with device profiles, instead it's configured with user profiles, so Dot1x can succeed. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.3.4,RUCKUS-AUTH-MIB::ruckusMacAuthDot1xEnable,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if the Dot1x should be tried next when a client succeeds authentication with MAC-Authentication method. This may be required when devices are not Dot1x capable, authentication order is MAC-Auth followed by Dot1x, and authentication server is not configured with user profiles, instead it's configured with device profiles, so MAC-Auth can succeed. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1,RUCKUS-AUTH-MIB::ruckusWebAuthTable,,not-accessible,,current,,A table that allows configuration of WebAuth for a specified VLAN. WebAuth is configured at the VLAN level unlike MAC-Auth and Dot1x at the port level. An entry exists in this table for each configured VLAN with WebAuth. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthEntry,,not-accessible,ruckusWebAuthVlan,current,,An entry of WebAuth configuration. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthVlan,INTEGER,not-accessible,,current,,Specifies the VLAN, this configuration entry applies to. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.2,RUCKUS-AUTH-MIB::ruckusWebAuthEnable,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if Web-Auth is enabled or disabled. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.3,RUCKUS-AUTH-MIB::ruckusWebAuthMode,INTEGER,read-only,,current,none(1):passcode(2):password(3):captivePortal(4),Specifies the authentication mode used for authenticating the users. none - no authentication is performed passcode - passcode based authentication, where the passcode can be statitically configured or generated dynamically password - username and password based authentication, where local user database or external RADIUS server is used captivePortal- external Captive Portal is used through redirection +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthMethod,INTEGER,read-only,,current,radius(1):local(2):radiusLocal(3):localRadius(4):none(5),When the AuthMode is configured as password, this specifies the order for performing authentication. radius - RADIUS server for authentication local - Local user DB for authentication radiusLocal - RADIUS followed by Local User DB localRadius - Local User DB followed by RADIUS none - none of these methods. DEFVAL { radius } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.5,RUCKUS-AUTH-MIB::ruckusWebAuthMaxHosts,Unsigned32,read-only,,current,,Specifies the maximum number of hosts allowed to be authenticated. Value 0 means no limit. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6,RUCKUS-AUTH-MIB::ruckusWebAuthMaxAuthAttempts,Unsigned32,read-only,,current,,Specifies the maximum number of attempts allowed during the auth cycle, after which the user is blocked for configured amount of time, before next authentication. The value of 0 means no limit. DEFVAL { 5 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.7,RUCKUS-AUTH-MIB::ruckusWebAuthReauthTime,Unsigned32,read-only,,current,,Specifies the re-authentication time, so the authenticated users can be periodically reauthenticated after the timeout specified through this object. Value 0 means no limit DEFVAL { 28800 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8,RUCKUS-AUTH-MIB::ruckusWebAuthCycleTime,Unsigned32,read-only,,current,,Specifies the time of the authentication since the first attempted user authentication, after which the user is not allowed to authenticate and must reload the login-page to start authentication. Value of 0 means no limit. DEFVAL { 600 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.9,RUCKUS-AUTH-MIB::ruckusWebAuthBlockTime,Unsigned32,read-only,,current,,Specifies the time for blocking the user when successive attempts have failed resulting in blocking the user. Value of 0 means, the user is blocked permanently. DEFVAL { 90 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.10,RUCKUS-AUTH-MIB::ruckusWebAuthMacAgeTime,Unsigned32,read-only,,current,,Specifies the the time which together with mac-age-time of the switch is considered an inactive time of the authenticated host, after which the device is forced to reauthenticate. The value can be 0 meaning no aging, the maximum can be upto the specified reauth-time. DEFVAL { 3600 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.11,RUCKUS-AUTH-MIB::ruckusWebAuthPasscode,OCTET,read-only,,current,,Specifies the statically configured passcode used to authenticate when passcode is used auth-method. The passcode is digits only. This can consist of upto 4 passcodes where each entry is seperated by space or tab. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.12,RUCKUS-AUTH-MIB::ruckusWebAuthLocalUserDb,OCTET,read-only,,current,,Specifies the locally configured User Database for use in authentication, when the auth-methos is password. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.13,RUCKUS-AUTH-MIB::ruckusWebAuthSecureLogin,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if HTTPS is used for authentication or not. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.14,RUCKUS-AUTH-MIB::ruckusWebAuthAccounting,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies if accounting is enbled or disabled. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.15,RUCKUS-AUTH-MIB::ruckusWebAuthCaptiveProfile,OCTET,read-only,,current,,Specifies the name of the configured Captive Portal profile, which should be used for redirection, if the auth-method is configured as captivePortal. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.16,RUCKUS-AUTH-MIB::ruckusWebAuthRedirectName,OCTET,read-only,,current,,Specifies the name to be used for URL when internal authentication is used dusring authentication for prompting username/password from the users, otherwise switch IP address is used. This must be valid domain name for the switch. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.17,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageRemoveUserId,INTEGER,read-write,,current,enabled(1):disabled(2),Specifies if user-id field in custom webauth login page is disabled or not, default value is disable, i.e., user-id field is displayed DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.18,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageUsernameLabel,OCTET,read-write,,current,,Specifies the name to be used for user-id label in webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.19,RUCKUS-AUTH-MIB::ruckusWebAuthWebpagePasswordLabel,OCTET,read-write,,current,,Specifies the name to be used for password label in webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.20,RUCKUS-AUTH-MIB::ruckusWebAuthUpLinkPort,Integer32,read-write,,current,,Specifies the port to be used as uplink port in network segmentation deployment +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.21,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageTop,OCTET,read-write,,current,,Specifies the name to be used for Top of webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.22,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageBottom,OCTET,read-write,,current,,Specifies the name to be used for Bottom of webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.23,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageTitle,OCTET,read-write,,current,,Specifies the name to be used for Title in webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.24,RUCKUS-AUTH-MIB::ruckusWebAuthWebpageLoginButton,OCTET,read-write,,current,,Specifies the name to be used for Login-button in webauth login page +.1.3.6.1.4.1.1991.1.1.3.44.1.4.2,RUCKUS-AUTH-MIB::ruckusWebAuthTrustPortTable,,not-accessible,,current,,A table that allows configuration of WebAuth Trust ports which are skipped from authentication in the given VLAN and are typically uplink ports. An entry exists in this table for every Trust Port defined on this VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.2.1,RUCKUS-AUTH-MIB::ruckusWebAuthTrustPortEntry,,not-accessible,ruckusWebAuthVlan:ruckusWebAuthTrustPort,current,,An entry in WebAuth Trust Port table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.2.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthTrustPort,Integer32,read-only,,current,,Specifies the trusted port or the up-link port, which is considered secure, so authentication is not performed on that port. This port generally provides access to the corporate or Internet or other network for resource access during authentication. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterTable,,not-accessible,,current,,A table that allows configuration of WebAuth DNS filters which are qualified DNS servers and should be allowed access during authentication for DNS queries by clients. An entry exists in this table for every DNS filter defined on this VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterEntry,,not-accessible,ruckusWebAuthVlan:ruckusWebAuthDnsFilterId,current,,An entry in WebAuth DNS-Filter table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterId,INTEGER,not-accessible,,current,,An index into the DNS filter table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.2,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the this filter entry, a V4 or V6 address. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.3,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterAddr,OCTET,read-only,,current,,The DNS server address, which is a V4 or V6 address. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthDnsFilterPrefix,Unsigned32,read-only,,current,,The DNS server server prefix, which applies to V4/V6 addresses. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListTable,,not-accessible,,current,,A table that allows configuration of WebAuth Whitelist entries which are qualified external servers that should be allowed access during authentication for various needs by clients. An entry exists in this table for every Whitelist server defined on this VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListEntry,,not-accessible,ruckusWebAuthVlan:ruckusWebAuthWhiteListId,current,,An entry in WebAuth Whitelist table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListId,INTEGER,not-accessible,,current,,An index into the White List Server table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.2,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the this whitelist entry, a V4 or V6 or DNS name. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.3,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListAddr,OCTET,read-only,,current,,The whitelist server address, which is a V4 or V6 address or DNS name. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthWhiteListPrefix,Unsigned32,read-only,,current,,The whitelist server prefix, which applies to V4/V6 addresses. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5,RUCKUS-AUTH-MIB::ruckusWebAuthFilterTable,,not-accessible,,current,,A table that allows configuration of WebAuth auth- filters which are applied to statically authenticate the clients without the need for authentication. This comes in for help to permit/deny pre-defined clients and save time in authentication. An entry exists in this table for every auth-filter defined on this VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1,RUCKUS-AUTH-MIB::ruckusWebAuthFilterEntry,,not-accessible,ruckusWebAuthVlan:ruckusWebAuthFilterMac,current,,An entry in WebAuth Auth-Filter table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthFilterMac,OCTET,read-only,,current,,Specifies the MAC Address of the filter for matching the authenticating clients through static authentication. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.2,RUCKUS-AUTH-MIB::ruckusWebAuthFilterPort,Integer32,read-only,,current,,Specifies the port in the VLAN, where this filter should be applied. If the port not valid, the entry applies to all ports in VLAN. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.3,RUCKUS-AUTH-MIB::ruckusWebAuthFilterDuration,Unsigned32,read-only,,current,,Specifies the time for blocking or allowing the user when the filter results in authenticating the user (matches). Value of 0 means, the user is blocked permanently or allowed permanently. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthFilterAction,INTEGER,read-only,,current,permit(1):deny(2),Specifies the action to be performed when this filter is applied on the authenticating client when matching occurs. permit(1) - allow the client in specified VLAN deny(2) - block the client +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalTable,,not-accessible,,current,,A table that allows configuration of WebAuth Captive profiles for various external WebAuth servers. The rntry provides the server information such as the DNS name or address, port and login page where the authenticating client should be redirected to. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalEntry,,not-accessible,IMPLIEDruckusWebAuthCaptivePortalName,current,,An entry in WebAuth Captive Poratl table. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.1,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalName,OCTET,not-accessible,,current,,Specifies the name of the profile entry. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.2,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the Captive server type - qualified name or IP address. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.3,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalAddr,OCTET,read-only,,current,,Specifies the Captive server qualified name or IP address. +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.4,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalPort,Unsigned32,read-only,,current,,Specifies the Captive server port for HTTP/HTTPS access. DEFVAL { 443 } +.1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.5,RUCKUS-AUTH-MIB::ruckusWebAuthCaptivePortalLoginPage,OCTET,read-only,,current,,Specifies the login page of the Captive server, where the client should be redirected to. +.1.3.6.1.4.1.1991.1.1.3.44.1.5,RUCKUS-AUTH-MIB::ruckusAuthPortConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1,RUCKUS-AUTH-MIB::ruckusAuthPortTable,,not-accessible,,current,,A table that allows configuration of FlexAuth, including Dot1x and MAC-Auth for a specified port. Most objects at the port level oerride the similar configured objects at the global level. An entry exists in this table for each configured with FlexAuth. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1,RUCKUS-AUTH-MIB::ruckusAuthPortEntry,,not-accessible,ifIndex,current,,An entry of FlexAuth port configuration. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.1,RUCKUS-AUTH-MIB::ruckusAuthPortEnable,BITS,read-only,,current,dot1x(0):macAuth(1),Specifies authentication methods that are enabled on this port. Unless the method is enabled globally, the same can't be enabled at port level. A bit field of '1' indicates enabled, otherwise disabled. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.2,RUCKUS-AUTH-MIB::ruckusAuthPortDot1xControl,INTEGER,read-only,,current,forceUnauthorized(1):controlauto(2):forceAuthorized(3):other(4),Specifies the Dot1x operating mode for this port, when Dot1x is enabled. force-unauthorized(1)- port's controlled port is placed unconditionally in the unauthorized state control-auto(2) - the controlled port is unauthorized until authentication takes place between client and server force-authorized(3) - the port's controlled port is placed unconditionally in the authorized state other(4) - not initialized DEFVAL { forceAuthorized } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.3,RUCKUS-AUTH-MIB::ruckusAuthPortDefaultVlan,INTEGER,read-only,,current,,This default VLAN is used to place this port, so this VLAN acts as a VLAN for the clients to belong to, when authentication server doesn't assign any VLANs. A value of zero for this object indicates no default Vlan is configured for this port on this Ruckus device, so the global default VLAN is used. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.4,RUCKUS-AUTH-MIB::ruckusAuthPortVoiceVlan,INTEGER,read-only,,current,,This voice VLAN is used to advertise through LLDP/CDP on this port, when connected devices are detected as Phones and authentication server doesn't assign any Voice VLAN. A value of zero for this object indicates no Voice Vlan is configured for this port on this Ruckus device, so the global Voice VLAN is used. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.5,RUCKUS-AUTH-MIB::ruckusAuthPortCriticalVlan,INTEGER,read-only,,current,,This VLAN is used to place the clients of this port, when the authentication server times out and the port auth-timeout-action is configired as 'critical', so the clients have limited access. Refer to ruckusAuthPortTimeoutAction object for timeout-action choices. A value of zero for this object indicates no Critical Vlan is configured for this port on this Ruckus device, so the global Critical VLAN is used. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.6,RUCKUS-AUTH-MIB::ruckusAuthPortRestrictVlan,INTEGER,read-only,,current,,This VLAN is used to place the clients of this port, when the clients fail the authentication and the auth-failure-action is configured as 'restrict', so the clients have limited access. Refer to ruckusAuthPortFailAction object for fail-action choices. A value of zero for this object indicates no Restrict Vlan is configured for this port on this Ruckus device, so the global Restrict VLAN is used. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.7,RUCKUS-AUTH-MIB::ruckusAuthPortMode,INTEGER,read-only,,current,singleUntagged(1):multipleUntagged(2):singleHost(3):multipleHosts(4),Specifies the authentication mode for this port. This overrides the globally configured value. DEFVAL { singleUntagged } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.8,RUCKUS-AUTH-MIB::ruckusAuthPortMethods,INTEGER,read-only,,current,dot1xMauth(1):mauthDot1x(2),Specifies authentication methods to be attempted in series of methods for this port. This overrides the globally configured value. DEFVAL { dot1xMauth } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.9,RUCKUS-AUTH-MIB::ruckusAuthPortMaxSessions,Unsigned32,read-only,,current,,Specifies the maximum number of authenticated clients allowed on this port. This doesn't include the clients allowed due to authentication failure and timeout policies. DEFVAL { 2 } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.10,RUCKUS-AUTH-MIB::ruckusAuthPortFailAction,INTEGER,read-only,,current,blockTraffic(1):restrictVlan(2),Specifies the action to be taken on this port. This overrides the globally set value. DEFVAL { blockTraffic } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.11,RUCKUS-AUTH-MIB::ruckusAuthPortTimeoutAction,INTEGER,read-only,,current,failure(1):success(2):criticalVlan(3):other(4),Specifies the action to be taken on this port, when the authentication server times out for various readons like server busy, network access, etc. This overrides the globally set value. DEFVAL { other } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.12,RUCKUS-AUTH-MIB::ruckusAuthPortReauthTimeout,Unsigned32,read-only,,current,,How often to re-authenticates clients of this port, when the clients were allowed due to authentication server timeout. Value of 0 disables the re-authentication. DEFVAL { 300 } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.13,RUCKUS-AUTH-MIB::ruckusAuthPortAging,BITS,read-only,,current,deniedSessions(0):permittedSessions(1),Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. This overrided the global value. +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.14,RUCKUS-AUTH-MIB::ruckusAuthPortAllowTagged,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. A bit field of '1' indicates enabled, otherwise disabled. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.15,RUCKUS-AUTH-MIB::ruckusAuthPortSourceGuard,INTEGER,read-only,,current,enabled(1):disabled(2),Source guard enabling ensures that the client IP address to be learned and allow the packets matching that IP address only. This is implied when user ACLs are applied on the port, so has impact only otherwise. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.16,RUCKUS-AUTH-MIB::ruckusAuthPortDosAttacks,INTEGER,read-only,,current,enabled(1):disabled(2),Specifies to prevent/allow Denial of Service attacks on this port. Constantly sending packets from different clients (MAC addresses) causes DOS, as the clients are not allowed without authentication, which may cause exhausing of system resources. DEFVAL { disabled } +.1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.17,RUCKUS-AUTH-MIB::ruckusAuthPortDosAttackLimit,Unsigned32,read-only,,current,,The maximum number of clients to be allowed at any time without authentication, and if authentication pending clients exceed the configured limit (as specified by this object), the port gets shutdown to prevent DOS attacks. DEFVAL { 512 } +.1.3.6.1.4.1.1991.1.1.3.44.1.6,RUCKUS-AUTH-MIB::ruckusAuthFilterConfig,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1,RUCKUS-AUTH-MIB::ruckusAuthFilterTable,,not-accessible,,current,,A table that allows configuration of FlexAuth auth- filters which are applied to statically authenticate the clients without the need for RADIUS server authenticator. This comes in for help to permit/deny pre-defined clients and save time in authentication. An entry exists in this table for every auth-filter bound on the port. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1,RUCKUS-AUTH-MIB::ruckusAuthFilterEntry,,not-accessible,ifIndex:ruckusAuthFilterId,current,,An entry of FlexAuth port Auth-Filter configuration. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.1,RUCKUS-AUTH-MIB::ruckusAuthFilterId,INTEGER,not-accessible,,current,,An index into the authe filter table. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.2,RUCKUS-AUTH-MIB::ruckusAuthFilterMac,OCTET,read-only,,current,,Specifies the MAC Address of the filter for matching the authenticating clients through static authentication. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.3,RUCKUS-AUTH-MIB::ruckusAuthFilterMask,OCTET,read-only,,current,,Specifies the Mask of the filter for matching the incoming clients through static authentication. The mask is applied on MAC in the filter and client MAC before the matching decision is made. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.4,RUCKUS-AUTH-MIB::ruckusAuthFilterVlan,INTEGER,read-only,,current,,Specifies the VLAN which should be used to place the authenticating client after the matching is done. This VLAN applies only when the action is permit. Denied clients are always blocked. +.1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.5,RUCKUS-AUTH-MIB::ruckusAuthFilterAction,INTEGER,read-only,,current,permit(1):deny(2),Specifies the action to be performed when this filter is applied on the authenticating client and matching occurs. permit(1) - allow the client in specified VLAN deny(2) - block the client +.1.3.6.1.4.1.1991.1.1.3.44.1.7,RUCKUS-AUTH-MIB::ruckusAuthSessions,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1,RUCKUS-AUTH-MIB::ruckusAuthSessionTable,,not-accessible,,current,,A table providing information about the FlexAuth sessions for each client at port level in the Ruckus device. This table contains entries for all the clients authenticated or failed on a given port. Entries get created when clients are authenticated amd cleared when they logoff or timeout. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1,RUCKUS-AUTH-MIB::ruckusAuthSessionEntry,,not-accessible,ifIndex:ruckusAuthSessionMac,current,,An entry containing information about the FlexAuth session of a specified client on a port +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.1,RUCKUS-AUTH-MIB::ruckusAuthSessionMac,OCTET,read-only,,current,,Specifies the MAC Address of the client (device/host) represented by this session entry +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.2,RUCKUS-AUTH-MIB::ruckusAuthSessionVlan,INTEGER,read-only,,current,,Specifies the VLAN, the client (device/host) belongs to, represented by this session entry. In case of voice-phones, this VLAN is the voice-VLAN (tagged) and in all other cases, most likely an untagged VLAN, unless it's a tagged VM client +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.3,RUCKUS-AUTH-MIB::ruckusAuthSessionVlanType,INTEGER,read-only,,current,default(1):retrict(2):critical(3):guest(4):radius(5),Decribes the type of the VLAN associated with the session. default(1) - Default VLANs as configured on Ruckus device restrict(2) - Restricted VLAN as authentication failed critical(3) - Critical VLAN as authentication timed out guest(4) - Guest VLAN as client is not Dot1x capable radius(5) - RADIUS (auth) server assigned VLAN +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.4,RUCKUS-AUTH-MIB::ruckusAuthSessionTaggedVlan,INTEGER,read-only,,current,,Tagged VLAN or Voice VLAN sent by the RADIUS server, so the port gets added to the VLAN, to prepare the device to send tagged packets in case of phones. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.5,RUCKUS-AUTH-MIB::ruckusAuthSessionUserName,OCTET,read-only,,current,,Indicates the User name associated with the client, represented by this session. In case of Dot1x sessions, it's the username used by the user to log into the network; whereas in case of MAC-Auth, it could be MAC address or user name assigned by RADIUS server in ACCESS-ACCEPT packet during authentication. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.6,RUCKUS-AUTH-MIB::ruckusAuthSessionDeviceType,INTEGER,read-only,,current,phone(1):wlanAP(2):router(3):bridge(4):other(8),Decribes the type of the client connnected and authenticated on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.7,RUCKUS-AUTH-MIB::ruckusAuthSessionMethod,INTEGER,read-only,,current,dot1x(1):macAuth(2),Specifies the authentication method that is used for authenticating the client on this port represented by this session. It's possible that both authentication methods are tried, both either succeeded or failed and the resulting status is generally decided by the last method. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.8,RUCKUS-AUTH-MIB::ruckusAuthSessionMode,INTEGER,read-only,,current,singleUntagged(1):multipleUntagged(2):singleHost(3):multipleHosts(4),Indicates the authentication mode applied for this client on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.9,RUCKUS-AUTH-MIB::ruckusAuthSessionStatus,INTEGER,read-only,,current,allowed(1):blocked(2):restrict(3):critical(4):guest(5):other(6),The authentication state of the session which can take the following values. allowed - client authentication is successful, so the complete access is granted blocked - client failed authentication, so access is denied restrict - client failed authentication, but allowed restricted access critical - client authentication timedout, so access is limited to critical operations guest - client is not Dot1x capable, so allowed guest role access +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.10,RUCKUS-AUTH-MIB::ruckusAuthSessionDot1xStatus,INTEGER,read-only,,current,other(1):initialize(2):disconnected(3):connecting(4):authenticating(5):authenticated(6):aborting(7):held(8):forceAuth(9):forceUnauth(10),Indicates the state of Dot1x authentication, if the client is using Dot1x for authentication. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.11,RUCKUS-AUTH-MIB::ruckusAuthSessionAgingType,INTEGER,read-only,,current,software(1):hardware(2):enabled(3):disabled(4),Indicates the aging status of the client session which can be of the following values. software(1): Client MAC entry is cleared as the entry timedout in hardware for configured inactivity period, so it has entered software aging state hardware(2): Client MAC has detected the inactivity on the port, so entered the hardware aging state enabled(3): Aging is enabled and there is no detection of inactivity on the port for this client, so aging has not started disabled(4): Aging is disabled for this client, so any amount of inactivity period doesn't clear the session +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.12,RUCKUS-AUTH-MIB::ruckusAuthSessionAge,Unsigned32,read-only,,current,,When the aging type is either software or hardware, this object indicates the time, the session had been in that state. When the configured maximum time is reached, the aging state moves from hardware to software or session is cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.13,RUCKUS-AUTH-MIB::ruckusAuthSessionTimeout,Unsigned32,read-only,,current,,Specifies the maximum amount of time, the session should exit before re-authenticating or terminating the sessions depending on another RADIUS attribute 'Termination-Action'. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.14,RUCKUS-AUTH-MIB::ruckusAuthSessionIdleTimeout,Unsigned32,read-only,,current,,Specifies the maximum amount of time after which the session is cleared when there is no traffic from the client. A value of 0 means, the sessions never gets terminated due to inactivity. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.15,RUCKUS-AUTH-MIB::ruckusAuthSessionTime,Unsigned32,read-only,,current,,Indcates the session UP time since the session had been up or created. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.16,RUCKUS-AUTH-MIB::ruckusAuthSessionV4IngressAcl,OCTET,read-only,,current,,Specifies the User Access List (ACL) applied in the Ingress direction for the IPv4 traffic for this client on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.17,RUCKUS-AUTH-MIB::ruckusAuthSessionV4EgressAcl,OCTET,read-only,,current,,Specifies the User Access List (ACL) applied in the Egress direction for the IPv4 traffic for this client on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.18,RUCKUS-AUTH-MIB::ruckusAuthSessionV6IngressAcl,OCTET,read-only,,current,,Specifies the User Access List (ACL) applied in the Ingress direction for the IPv6 traffic for this client on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.19,RUCKUS-AUTH-MIB::ruckusAuthSessionV6EgressAcl,OCTET,read-only,,current,,Specifies the User Access List (ACL) applied in the Egress direction for the IPv6 traffic for this client on this port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.20,RUCKUS-AUTH-MIB::ruckusAuthSessionTxOctets,Counter64,read-only,,current,,Specifies the number bytes sent for this session on the port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.21,RUCKUS-AUTH-MIB::ruckusAuthSessionRxOctets,Counter64,read-only,,current,,Specifies the number bytes received for this session on the port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.22,RUCKUS-AUTH-MIB::ruckusAuthSessionTxPkts,Counter64,read-only,,current,,Specifies the number bytes sent for this session on the port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.23,RUCKUS-AUTH-MIB::ruckusAuthSessionRxPkts,Counter64,read-only,,current,,Specifies the number bytes received for this session on the port. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.24,RUCKUS-AUTH-MIB::ruckusAuthSessionFailureReason,OCTET,read-only,,current,,Specifies the internal failure reason for this client, such as memory allocation, RADIUS attribute parsing, RADIUS REJECT, etc. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.25,RUCKUS-AUTH-MIB::ruckusAuthSessionFlags,BITS,read-only,,current,staticAuthenticated(0):taggedSession(1):dot1xNonCapable(2):dot1xEnabled(3):masterMacAuth(4):v4AclApplied(5):v6AclApplied(6),Desacribes various other parameters of client session, by clubbing them together in one object for simplicity. staticAuthenticated(0): Client is authenticaticated using configured auth-fileters on the port, instead of normal RADIUS server taggedSession(1): Client VLAN is tagged, which may indicate the client as Phone or tagged VM dot1xNonCapable(2): Client is not Dot1x capabale dot1xEnabled(3): Dot1x should be tried or not, when MAC-Auth succeeds depending on default value (enable), configured value or RADIUS attribute masterMacAuth(4), Indicates if this session is Master session in case of MAC-Auth session, as there would be multiple sessions for MAC-Auth, whereas there would be only one session visible v4AclApplied(5): IPv4 ACL is applied for the client v6AclApplied(6): IPv6 ACL is applied for the client +.1.3.6.1.4.1.1991.1.1.3.44.1.7.2,RUCKUS-AUTH-MIB::ruckusAuthSessionAddrTable,,not-accessible,,current,,An address table providing V4/V6 information about the FlexAuth sessions for each client at port level in the Ruckus device. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1,RUCKUS-AUTH-MIB::ruckusAuthSessionAddrEntry,,not-accessible,ifIndex:ruckusAuthSessionMac:ruckusAuthSessionAddrId,current,,An entry containing information about the FlexAuth session address of a specified client on a port +.1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.1,RUCKUS-AUTH-MIB::ruckusAuthSessionAddrId,INTEGER,not-accessible,,current,,An index into the White List Server table. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.2,RUCKUS-AUTH-MIB::ruckusAuthSessionAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the this address entry, a V4 or V6. +.1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.3,RUCKUS-AUTH-MIB::ruckusAuthSessionAddr,OCTET,read-only,,current,,The address of this session entry, which is a V4 or V6 address. +.1.3.6.1.4.1.1991.1.1.3.44.1.8,RUCKUS-AUTH-MIB::ruckusAuthStatistics,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1,RUCKUS-AUTH-MIB::ruckusAuthStatsTable,,not-accessible,,current,,A table that provides information about the summary of MAC-Auth and Dot1x sessions at port level. An entry exists in this table for every port enabled for FlexAuth. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1,RUCKUS-AUTH-MIB::ruckusAuthStatsEntry,,not-accessible,ifIndex,current,,An entry of port level FlexAuth session summary table. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.1,RUCKUS-AUTH-MIB::ruckusDot1xSessionsAttempted,Counter32,read-only,,current,,The number of Dot1x sessions attempted on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.2,RUCKUS-AUTH-MIB::ruckusDot1xSessionsAccepted,Counter32,read-only,,current,,The number of Dot1x sessions accepted or permited on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.3,RUCKUS-AUTH-MIB::ruckusDot1xSessionsRejected,Counter32,read-only,,current,,The number of Dot1x sessions failed or rejected on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.4,RUCKUS-AUTH-MIB::ruckusDot1xSessionsInProgress,Counter32,read-only,,current,,The number of Dot1x sessions which are in progress on this port waiting for authentication to be completed, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.5,RUCKUS-AUTH-MIB::ruckusDot1xSessionsErrored,Counter32,read-only,,current,,The number of Dot1x sessions which are neither accepted or rejected due to conditions like timeout, resource failure, etc; on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.6,RUCKUS-AUTH-MIB::ruckusMacAuthSessionsAttempted,Counter32,read-only,,current,,The number of MAC-Auth sessions attempted on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.7,RUCKUS-AUTH-MIB::ruckusMacAuthSessionsAccepted,Counter32,read-only,,current,,The number of MAC-Auth sessions accepted or permited on this port, since the time the stats were cleared +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.8,RUCKUS-AUTH-MIB::ruckusMacAuthSessionsRejected,Counter32,read-only,,current,,The number of MAC-Auth sessions failed or rejected on this port, since the time the stats were cleared +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.9,RUCKUS-AUTH-MIB::ruckusMacAuthSessionsInProgress,Counter32,read-only,,current,,The number of MAC-Auth sessions which are in progress on this port waiting for authentication to be completed, since the time the stats were cleared +.1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.10,RUCKUS-AUTH-MIB::ruckusMacAuthSessionsErrored,Counter32,read-only,,current,,The number of MAC-Auth sessions which are neither accepted or rejected due to conditions like timeout, resource failure, etc; on this port, since the time the stats were cleared. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2,RUCKUS-AUTH-MIB::ruckusDot1xAuthStatsTable,,not-accessible,,current,,A table that provides information about the Dot1x Statistics at port level. An entry exists in this table for every port enabled for Dot1x. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1,RUCKUS-AUTH-MIB::ruckusDot1xAuthStatsEntry,,not-accessible,ifIndex,current,,An entry of per port Dot1x statistics table. +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.1,RUCKUS-AUTH-MIB::ruckusDot1xTxEAPFrames,Counter32,read-only,,current,,The total number of EAPOL frames transmitted on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.2,RUCKUS-AUTH-MIB::ruckusDot1xTxEAPReqIdFrames,Counter32,read-only,,current,,The number of EAP-Request/Identity frames transmitted on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.3,RUCKUS-AUTH-MIB::ruckusDot1xTxEAPReqFrames,Counter32,read-only,,current,,The number of transmitted EAP request frames that are not EAP-Request/identify on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.4,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPFrames,Counter32,read-only,,current,,The total number of EAPOL frames received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.5,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPStartFrames,Counter32,read-only,,current,,The number of EAPOL-Start frames received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.6,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPLogOffFrames,Counter32,read-only,,current,,The number of EAPOL-Logoff frames received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.7,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPRespIdFrames,Counter32,read-only,,current,,The number of EAP-Response/Identify frames received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.8,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPRespFrames,Counter32,read-only,,current,,The number of received EAP-Response frames other than EAP-Response/Identity on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.9,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPInvalidFrames,Counter32,read-only,,current,,The number of invalid EAPOL frames received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.10,RUCKUS-AUTH-MIB::ruckusDot1xRxLengthErrorFrames,Integer32,read-only,,current,,The number of EAPOL frames received with incorrect length on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.11,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPLastFrameVersion,Unsigned32,read-only,,current,,The version of last EAP frame received on this port +.1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.12,RUCKUS-AUTH-MIB::ruckusDot1xRxEAPLastFrameSource,OCTET,read-only,,current,,The MAC address of the source from where the last EAP frame received on this port +.1.3.6.1.4.1.1991.1.1.3.44.2,RUCKUS-AUTH-MIB::ruckusAuthConformance,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.2.1,RUCKUS-AUTH-MIB::ruckusAuthMIBCompliances,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.2.1.1,RUCKUS-AUTH-MIB::ruckusAuthCompliance,,,,,,The compliance statement for entities which implement RUCKUS-AUTH-MIB. +.1.3.6.1.4.1.1991.1.1.3.44.2.2,RUCKUS-AUTH-MIB::ruckusAuthMIBGroups,,,,,, +.1.3.6.1.4.1.1991.1.1.3.44.2.2.1,RUCKUS-AUTH-MIB::ruckusAuthConfigGroup,,,,,,A collection of objects that provide global configuration of FlexAuth feature, common to both MAC-Auth and Dot1x. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.2,RUCKUS-AUTH-MIB::ruckusDot1xAuthConfigGroup,,,,,,A collection of objects that provide global global configuration of Dot1x sub-feature, which applies only to Dot1x. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.3,RUCKUS-AUTH-MIB::ruckusMacAuthConfigGroup,,,,,,A collection of objects that provide global configuration of MAC-Auth sub-feature, which applies only to MAC-Auth. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.4,RUCKUS-AUTH-MIB::ruckusAuthPortConfigGroup,,,,,,A collection of objects that provide interface configuration of FlexAuth feature,common to both MAC-Auth and Dot1x. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.5,RUCKUS-AUTH-MIB::ruckusAuthFilterConfigGroup,,,,,,A collection of objects that provide interface auth filter configuration of FlexAuth feature, common to both MAC-Auth and Dot1x. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.6,RUCKUS-AUTH-MIB::ruckusAuthSessionsGroup,,,,,,A collection of objects that provide session information of a FlexAuth session. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.7,RUCKUS-AUTH-MIB::ruckusAuthStatsGroup,,,,,,A collection of objects that provide session statistics of FlexAuth sessions at port level. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.8,RUCKUS-AUTH-MIB::ruckusDot1xAuthStatsGroup,,,,,,A collection of objects that provide Dot1x statistics of Dot1x sessions at port level. +.1.3.6.1.4.1.1991.1.1.3.44.2.2.9,RUCKUS-AUTH-MIB::ruckusWebAuthConfigGroup,,,,,,A collection of objects that provide WebAuth configuration. +.1.3.6.1.4.1.1991.1.1.3.45,RUCKUS-ACL-MIB::ruckusAclMIB,,,,,,Management Information for describing the MAC, IPv4, IPv6 ACLs, their bindings on ports, VLANs and VLAN+Port combinations. The Ruckus Wireless, Inc proprietary MIB module for Access Control List. It has new tables for Ipv4, Ipv6 and MAC Access Control Lists. Copyright (C) Ruckus Wireless, Inc., (2017) This document and the information contained herein are provided on an AS IS basis and Ruckus Wireless, Inc DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +.1.3.6.1.4.1.1991.1.1.3.45.0,RUCKUS-ACL-MIB::ruckusAclNotify,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1,RUCKUS-ACL-MIB::ruckusAclObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.1,RUCKUS-ACL-MIB::ruckusAcls,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1,RUCKUS-ACL-MIB::ruckusAclTable,,not-accessible,,current,,Table of Ruckus Ipv4/Ipv6/MAC Access Control Lists (ACLs) +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1,RUCKUS-ACL-MIB::ruckusAclEntry,,not-accessible,ruckusAclType:ruckusAclName,current,,An entry in the Ruckus Ipv4/Ipv6/MAC Access Control List table. +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.1,RUCKUS-ACL-MIB::ruckusAclType,INTEGER,not-accessible,,current,mac(1):ipv4(2):ipv6(3),Type of the ACL, this entry specifies. +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.2,RUCKUS-ACL-MIB::ruckusAclName,OCTET,not-accessible,,current,,Unique Access Control List name for an entry. +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.3,RUCKUS-ACL-MIB::ruckusAclAcctEnable,INTEGER,read-create,,current,true(1):false(2),Specifies if accounting is enabled for the filters in this ACL. +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.4,RUCKUS-ACL-MIB::ruckusAclStandard,INTEGER,read-only,,current,true(1):false(2),Specifies the type IPv4 ACL - standard or extended, if ACL is of IPv4 ACL. +.1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.5,RUCKUS-ACL-MIB::ruckusAclRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creation of IPv4/IPv6/MAC ACL. Setting this object to destroy(6) removes this IPv4/IPv6/MAC ACL. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.2,RUCKUS-ACL-MIB::ruckusAclFilters,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1,RUCKUS-ACL-MIB::ruckusIpv4Filters,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1,RUCKUS-ACL-MIB::ruckusIpv4AclFilterTable,,not-accessible,,current,,Table of Ruckus Ipv4 Access Control List filters +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1,RUCKUS-ACL-MIB::ruckusIpv4AclFilterEntry,,not-accessible,ruckusAclName:ruckusIpv4AclFilterSeqNum,current,,An entry in the Ruckus Ipv4 Access Control List Filter table. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.1,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSeqNum,Unsigned32,not-accessible,,current,,Specifies the sequence number for this ACL filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.2,RUCKUS-ACL-MIB::ruckusIpv4AclFilterAction,INTEGER,read-create,,current,deny(1):permit(2),Action to take if the IP packet matches with this ACL filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.3,RUCKUS-ACL-MIB::ruckusIpv4AclFilterStdProtocol,INTEGER,read-create,,current,ip(0):icmp(1):igmp(2):tcp(6):udp(17):ip6(41):rsvp(46):gre(47):esp(50):ospf(89):pim(103):extended(255),Standard transport protocols allowed. The extended option enables to define other protocol using the OID ruckusIpv4AclFilterExtProtocol which takes any value. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.4,RUCKUS-ACL-MIB::ruckusIpv4AclFilterExtProtocol,INTEGER,read-create,,current,,Any transport protocol other than standard protocols mentioned with ruckusIpv4AclFilterStdProtocol OID. 0 means any protocol. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.5,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSrcAddr,OCTET,read-create,,current,,Source Ipv4 address to match in packets. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.6,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSrcMask,OCTET,read-create,,current,,Source Ipv4 address mask used in combination with source IPv4 address to derive effective address for matching. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.7,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSrcOperator,INTEGER,read-create,,current,eq(1):neq(2):lt(3):gt(4):range(5):none(6),Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.8,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSrcPortLow,Unsigned32,read-create,,current,,Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.9,RUCKUS-ACL-MIB::ruckusIpv4AclFilterSrcPortHigh,Unsigned32,read-create,,current,,Used only if the operator is defined as 'range', where it specifies the end of range +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.10,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDestAddr,OCTET,read-create,,current,,Destination Ipv4 address to match in packets. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.11,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDestMask,OCTET,read-create,,current,,Destination Ipv4 address mask used in combination with source IPv4 address to derive effective address for matching. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.12,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDestOperator,INTEGER,read-create,,current,eq(1):neq(2):lt(3):gt(4):range(5):none(6),Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.13,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDestPortLow,Unsigned32,read-create,,current,,Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.14,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDestPortHigh,Unsigned32,read-create,,current,,Used only if the operator is defined as 'range', where it specifies the end of range +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.15,RUCKUS-ACL-MIB::ruckusIpv4AclFilterEstablished,INTEGER,read-create,,current,true(1):false(2),Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This filter only applies to TCP transport protocol. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.16,RUCKUS-ACL-MIB::ruckusIpv4AclFilterPrecedence,INTEGER,read-create,,current,routine(1):priority(2):immediate(3):flash(4):flashOverride(5):critical(6):internet(7):network(8):other(9),Specifies the IP precedence value to match in packets. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.17,RUCKUS-ACL-MIB::ruckusIpv4AclFilterTos,INTEGER,read-create,,current,normal(1):lowCost(2):maxReliability(3):maxThroughput(4):minDelay(5),This refers to the IP TOS value in range <0-15>, which is the sum of numeric vlaues of the following options 0x0 - normal TOS 0x1 - minimum monetary cost TOS 0x2 - maximum reliability TOS 0x4 - maximum throughput TOS 0x8 - minimum delay +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.18,RUCKUS-ACL-MIB::ruckusIpv4AclFilterIcmpType,INTEGER,read-create,,current,echoReply(0):destUnreachable(3):srcQuench(4):redirect(5):echoReq(8):routerAdv(9):routerSolicit(10):timeExceed(11):paramProblem(12):timestampReq(13):timestampReply(14):infoReq(15):infoReply(16):addrMaskReq(17):addrMaskReply(18):extended(255),Specifies the ICMP type for matching if the Protocol is ICMP. 0 means ignore the field. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.19,RUCKUS-ACL-MIB::ruckusIpv4AclFilterIcmpCode,INTEGER,read-create,,current,,ICMP Message Code value. Used in combination with ICMP Message Type to setup an ICMP filter. This object is not used with any other protocol. 0 means ignored. The supported values are Type: Echo reply 1 = Echo reply Type: Destination unreachable 1 = Network unreachable 2 = Host unreachable 3 = Protocol unreachable 4 = Port unreachable 5 = Fragmentation needed by don't fragment bit set 6 = Source route failed 7 = Destination network unknown 8 = Destination host unknown 9 = Source host isolated 10 = Destination network administratively prohibited 11 = Destination host administratively prohibited 12 = Network unreachable for TOS 13 = Host unreachable for TOS 14 = Communication administratively prohibited by filter 15 = Host precedence violation 16 = Precedence cutoff in effect Type: Source quench 1 = Source quench Type: Redirect 1 = Redirect for network 2 = Redirect for host 3 = Redirect for TOS and network 4 = Redirect for TOS and host Type: Echo request 1 = Echo request Type: Router advertisement 1 = Router advertisement Type: Router solicitation 1 = Router solicitation Type: Time exceeded 1 = Time to live equals 0 during transmit 2 = Time to live equals 0 during reassembly Type: Parameter problem 1 = IP header bad (catchall error) 2 = Required option missing Type: Timestamp request 1 = Timestamp request Type: Timestamp reply 1 = Timestamp reply Type: Information request 1 = Information request Type: Information reply 1 = Information reply Type: Address mask request 1 = Address mask request Type: Address mask reply 1 = Address mask reply +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.20,RUCKUS-ACL-MIB::ruckusIpv4AclFilterExtIcmpType,INTEGER,read-create,,current,,Any type that can't be specified using the standard types can be specified using this object. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.21,RUCKUS-ACL-MIB::ruckusIpv4AclFilterPolicyName,OCTET,read-create,,current,,Specifies the DSCP value to use in matching or marking. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.22,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDscpMatch,INTEGER,read-create,,current,,Specifies the DSCP value for matching with this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.23,RUCKUS-ACL-MIB::ruckusIpv4AclFilterDscpForce,INTEGER,read-create,,current,,Specifies the DSCP value to be used for marking in outgoing packets matching this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.24,RUCKUS-ACL-MIB::ruckusIpv4AclFilterPriorityMatch,INTEGER,read-create,,current,,Specifies the 802.1P priority for matching with this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.25,RUCKUS-ACL-MIB::ruckusIpv4AclFilterPriorityForce,INTEGER,read-create,,current,,Specifies the 802.1P priority to be used for marking in outgoing packets matching this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.26,RUCKUS-ACL-MIB::ruckusIpv4AclFilterInternalPriority,INTEGER,read-create,,current,,QoS priority option for this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.27,RUCKUS-ACL-MIB::ruckusIpv4AclFilterMirrorPkts,INTEGER,read-create,,current,true(1):false(2),Mirror packets matching ACL permit clause. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.28,RUCKUS-ACL-MIB::ruckusIpv4AclFilterLogEnable,INTEGER,read-create,,current,true(1):false(2),Specifies if logging is enabled for the filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.29,RUCKUS-ACL-MIB::ruckusIpv4AclFilterComments,OCTET,read-only,,current,,Remark description of individual Access Control List entry. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.30,RUCKUS-ACL-MIB::ruckusIpv4AclFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creation of IPv4 ACL filter. Setting this object to destroy(6) removes this IPv4 ACL filter. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2,RUCKUS-ACL-MIB::ruckusIpv6Filters,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1,RUCKUS-ACL-MIB::ruckusIpv6AclFilterTable,,not-accessible,,current,,Table of Ruckus Ipv6 Access Control List Filters +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1,RUCKUS-ACL-MIB::ruckusIpv6AclFilterEntry,,not-accessible,ruckusAclName:ruckusIpv6AclFilterSeqNum,current,,An entry in the Ruckus Ipv6 Access Control List Filter table. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.1,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSeqNum,Unsigned32,not-accessible,,current,,Specifies the sequence number for this ACL filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.2,RUCKUS-ACL-MIB::ruckusIpv6AclFilterAction,INTEGER,read-create,,current,deny(1):permit(2),Action to take if the IPv6 packet matches with this access control list filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.3,RUCKUS-ACL-MIB::ruckusIpv6AclFilterStdProtocol,INTEGER,read-create,,current,tcp(6):udp(17):ip6(41):esp(50):ahp(51):icmp(58):sctp(132):extended(255),Standard transport protocols allowed. The extended option enables to define other protocol using the OID ruckusIpv6AclFilterExtProtocol which takes any value. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.4,RUCKUS-ACL-MIB::ruckusIpv6AclFilterExtProtocol,INTEGER,read-create,,current,,Any transport protocol other than standard protocols mentioned with ruckusIpv6AclFilterStdProtocol OID. 0 means any protocol. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.5,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSrcAddr,OCTET,read-create,,current,,Source Ipv6 address to match in packets. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.6,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSrcPrefixLen,Unsigned32,read-create,,current,,Source Ipv6 address prefix length. DEFVAL { 64 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.7,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSrcOperator,INTEGER,read-create,,current,eq(1):neq(2):lt(3):gt(4):range(5):none(6),Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.8,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSrcPortLow,Unsigned32,read-create,,current,,Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.9,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSrcPortHigh,Unsigned32,read-create,,current,,Used only if the operator is defined as 'range', where it specifies the end of range +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.10,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDestAddr,OCTET,read-create,,current,,Destination Ipv6 address to match in packets. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.11,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDestPrefixLen,Unsigned32,read-create,,current,,Destination Ipv6 address prefix length. DEFVAL { 64 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.12,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDestOperator,INTEGER,read-create,,current,eq(1):neq(2):lt(3):gt(4):range(5):none(6),Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.13,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDestPortLow,Unsigned32,read-create,,current,,Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.14,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDestPortHigh,Unsigned32,read-create,,current,,Used only if the operator is defined as 'range', where it specifies the end of range +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.15,RUCKUS-ACL-MIB::ruckusIpv6AclFilterEstablished,INTEGER,read-create,,current,true(1):false(2),Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This filter only applies to TCP transport protocol. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.16,RUCKUS-ACL-MIB::ruckusIpv6AclFilterIcmpType,INTEGER,read-create,,current,destUnreachable(1):largePackets(2):timeExceed(3):paramProblem(4):echoReq(128):echoReply(129):mldQueries(130):mldReport(131):mldReduction(132):routerSolicit(133):routerAdv(134):neighborSolicit(135):neighborAdv(136):routerRenumbering(138):extended(255),Specifies the ICMP6 type for matching if the Protocol is ICMP6. 0 means ignore the field. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.17,RUCKUS-ACL-MIB::ruckusIpv6AclFilterIcmpCode,INTEGER,read-create,,current,,ICMP Message Code value. Used in combination with ICMP Message Type to setup an ICMP filter. This object is not used with any other protocol. 0 means ignored. The supported values are Type: Echo reply 1 = Echo reply Type: Destination unreachable 1 = Network unreachable 2 = Host unreachable 3 = Protocol unreachable 4 = Port unreachable 5 = Fragmentation needed by don't fragment bit set 6 = Source route failed 7 = Destination network unknown 8 = Destination host unknown 9 = Source host isolated 10 = Destination network administratively prohibited 11 = Destination host administratively prohibited 12 = Network unreachable for TOS 13 = Host unreachable for TOS 14 = Communication administratively prohibited by filter 15 = Host precedence violation 16 = Precedence cutoff in effect Type: Echo request 1 = Echo request Type: Router advertisement 1 = Router advertisement Type: Router solicitation 1 = Router solicitation Type: Time exceeded 1 = Time to live equals 0 during transmit 2 = Time to live equals 0 during reassembly Type: Parameter problem 1 = IP header bad (catchall error) 2 = Required option missing Type: Timestamp request 1 = Timestamp request +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.18,RUCKUS-ACL-MIB::ruckusIpv6AclFilterExtIcmpType,INTEGER,read-create,,current,,Any type that can't be specified using the standard types can be specified using this object. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.19,RUCKUS-ACL-MIB::ruckusIpv6AclFilterPolicyName,OCTET,read-create,,current,,Specifies the DSCP value to use in matching or marking. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.20,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDscpMatch,INTEGER,read-create,,current,,Specifies the DSCP value for matching with this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.21,RUCKUS-ACL-MIB::ruckusIpv6AclFilterDscpForce,INTEGER,read-create,,current,,Specifies the DSCP value to be used for marking in outgoing packets matching this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.22,RUCKUS-ACL-MIB::ruckusIpv6AclFilterPriorityMatch,INTEGER,read-create,,current,,Specifies the 802.1P priority for matching with this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.23,RUCKUS-ACL-MIB::ruckusIpv6AclFilterPriorityForce,INTEGER,read-create,,current,,Specifies the 802.1P priority to be used for marking in outgoing packets matching this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.24,RUCKUS-ACL-MIB::ruckusIpv6AclFilterInternalPriority,INTEGER,read-create,,current,,QoS priority option for this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.25,RUCKUS-ACL-MIB::ruckusIpv6AclFilterFragments,INTEGER,read-create,,current,true(1):false(2),Match IPv6 fragments with non-zero fragment offset in V6 packets matching this ACL permit clause. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.26,RUCKUS-ACL-MIB::ruckusIpv6AclFilterSourceRoute,INTEGER,read-create,,current,true(1):false(2),Match only rource routed packets matching this ACL permit clause. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.27,RUCKUS-ACL-MIB::ruckusIpv6AclFilterMirrorPkts,INTEGER,read-create,,current,true(1):false(2),Mirror packets matching ACL permit clause. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.28,RUCKUS-ACL-MIB::ruckusIpv6AclFilterLogEnable,INTEGER,read-create,,current,true(1):false(2),Specifies if logging is enabled for the filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.29,RUCKUS-ACL-MIB::ruckusIpv6AclFilterComments,OCTET,read-only,,current,,Remark description of individual Access Control List entry. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.30,RUCKUS-ACL-MIB::ruckusIpv6AclFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creation of IPv6 ACL filter. Setting this object to destroy(6) removes this IPv6 ACL filter. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3,RUCKUS-ACL-MIB::ruckusMacFilters,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1,RUCKUS-ACL-MIB::ruckusMacAclFilterTable,,not-accessible,,current,,Table of Ruckus Mac Access Control List Filters. MAC ACLs filter traffic based on any of the following fields: - Source MAC address and source MAC mask - Destination MAC address and destination MAC mask - VLAN ID - Ethernet type +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1,RUCKUS-ACL-MIB::ruckusMacAclFilterEntry,,not-accessible,ruckusAclName:ruckusMacAclFilterSeqNum,current,,An entry in the Ruckus MAC Access Control List Filter table. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.1,RUCKUS-ACL-MIB::ruckusMacAclFilterSeqNum,Unsigned32,not-accessible,,current,,Specifies the sequence number for this ACL filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.2,RUCKUS-ACL-MIB::ruckusMacAclFilterAction,INTEGER,read-create,,current,deny(1):permit(2),Action to take if the L2 packet matches with this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.3,RUCKUS-ACL-MIB::ruckusMacAclFilterSrcAddr,OCTET,read-create,,current,,Source MAC address to match in the incoming L2 packet. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.4,RUCKUS-ACL-MIB::ruckusMacAclFilterSrcMask,OCTET,read-create,,current,,Source MAC address mask to apply with source address to derive the MAC address for filter action. For example, to match on the first two bytes of MAC aabb.ccdd.eeff, the mask should be ffff.0000.0000. In this case, the filter matches all source MACs that contain 'aabb' as the first two bytes and any values in remaining address. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.5,RUCKUS-ACL-MIB::ruckusMacAclFilterDestAddr,OCTET,read-create,,current,,Destination MAC address to match in the incoming L2 packet. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.6,RUCKUS-ACL-MIB::ruckusMacAclFilterDestMask,OCTET,read-create,,current,,Destination MAC address mask to apply with destination address to derive the MAC address for filter action. For example, to match on the first two bytes of MAC aabb.ccdd.eeff, the mask should be ffff.0000.0000. In this case, the filter matches all source MACs that contain 'aabb' as the first two bytes and any values in remaining address. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.7,RUCKUS-ACL-MIB::ruckusMacAclFilterEtherType,INTEGER,read-create,,current,arp(1):ipv4(2):ipv6(3):extended(4),Ethernet Type to match in the incoming packet, if specified. The extended option enables to define other types sing the OID ruckusMacAclFilterExtEtherType which takes any value. DEFVAL { arp } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.8,RUCKUS-ACL-MIB::ruckusMacAclFilterExtEtherType,Unsigned32,read-create,,current,,Any EtherType other than standard protocols mentioned with ruckusMacAclFilterEtherType OID. 0 means any protocol. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.9,RUCKUS-ACL-MIB::ruckusMacAclFilterMirrorPkts,INTEGER,read-create,,current,true(1):false(2),Mirror packets matching ACL permit clause. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.10,RUCKUS-ACL-MIB::ruckusMacAclFilterLogEnable,INTEGER,read-create,,current,true(1):false(2),Specifies if logging is enabled for this filter. +.1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.11,RUCKUS-ACL-MIB::ruckusMacAclFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creation of MAC ACL filter. Setting this object to destroy(6) removed this MAC ACL filter. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.3,RUCKUS-ACL-MIB::ruckusAclBindings,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1,RUCKUS-ACL-MIB::ruckusAclIfBindTable,,not-accessible,,current,,Table of IPv4/IPv6/MAC ACL bindings to a port. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1,RUCKUS-ACL-MIB::ruckusAclIfBindEntry,,not-accessible,ruckusAclIfBindPort:ruckusAclIfBindType:ruckusAclIfBindDirection,current,,An entry in the IPv4/IPv6/MAC ACL bindings for a gievn port. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.1,RUCKUS-ACL-MIB::ruckusAclIfBindPort,Integer32,not-accessible,,current,,The port on where this ACL binding is applied on. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.2,RUCKUS-ACL-MIB::ruckusAclIfBindType,INTEGER,not-accessible,,current,mac(1):ipv4(2):ipv6(3),Type of the ACL, this binding describes on the port. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.3,RUCKUS-ACL-MIB::ruckusAclIfBindDirection,INTEGER,not-accessible,,current,ingress(1):egress(2),Direction in which this ACL is applied on the port. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.4,RUCKUS-ACL-MIB::ruckusAclIfBindName,OCTET,read-create,,current,,Defined ACL name to bind on port in the given direction. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.5,RUCKUS-ACL-MIB::ruckusAclIfBindLog,INTEGER,read-create,,current,true(1):false(2),Enable or disable logging on the port for this ACL. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.6,RUCKUS-ACL-MIB::ruckusAclIfBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the binding of IPv4 or IPv6 or MAC ACL with a given port. Setting this object to destroy(6) unbinds this IPv4 or IPv6 or MAC ACL from the port. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2,RUCKUS-ACL-MIB::ruckusAclVlanBindTable,,not-accessible,,current,,Table of IPv4/IPv6/MAC ACL bindings to a VLAN +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1,RUCKUS-ACL-MIB::ruckusAclVlanBindEntry,,not-accessible,ruckusAclVlanBindId:ruckusAclVlanBindType:ruckusAclVlanBindDirection,current,,An entry in the IPv4/IPv6/MAC ACL bindings for a gievn VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.1,RUCKUS-ACL-MIB::ruckusAclVlanBindId,INTEGER,not-accessible,,current,,The VLAN where this ACL binding is applied. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.2,RUCKUS-ACL-MIB::ruckusAclVlanBindType,INTEGER,not-accessible,,current,mac(1):ipv4(2):ipv6(3),Type of the ACL, this binding describes on the VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.3,RUCKUS-ACL-MIB::ruckusAclVlanBindDirection,INTEGER,not-accessible,,current,ingress(1):egress(2),Direction in which this ACL is applied on the VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.4,RUCKUS-ACL-MIB::ruckusAclVlanBindName,OCTET,read-create,,current,,Defined ACL name to bind on VLAN in the given direction. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.5,RUCKUS-ACL-MIB::ruckusAclVlanBindLog,INTEGER,read-create,,current,true(1):false(2),Enable or disable logging on the VLAN for this ACL. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.6,RUCKUS-ACL-MIB::ruckusAclVlanBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the binding of IPv4 or IPv6 or MAC ACL with a given VLAN. Setting this object to destroy(6) unbinds this IPv4 or IPv6 or MAC ACL from the VLAN. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3,RUCKUS-ACL-MIB::ruckusAclVPortBindTable,,not-accessible,,current,,Table of IPv4/IPv6/MAC ACL bindings to a port on VLAN +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1,RUCKUS-ACL-MIB::ruckusAclVPortBindEntry,,not-accessible,ruckusAclVPortBindId:ruckusAclVPortBindPort:ruckusAclVPortBindType:ruckusAclVPortBindDirection,current,,An entry in the IPv4/IPv6/MAC ACL bindings for a port in a VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.1,RUCKUS-ACL-MIB::ruckusAclVPortBindId,INTEGER,not-accessible,,current,,The VLAN where this ACL binding is applied on. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.2,RUCKUS-ACL-MIB::ruckusAclVPortBindPort,Integer32,not-accessible,,current,,The port in the VLAN where this ACL binding is applied on. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.3,RUCKUS-ACL-MIB::ruckusAclVPortBindType,INTEGER,not-accessible,,current,mac(1):ipv4(2):ipv6(3),Type of the ACL, this binding describes on the port in a VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.4,RUCKUS-ACL-MIB::ruckusAclVPortBindDirection,INTEGER,not-accessible,,current,ingress(1):egress(2),Direction in which this ACL is applied on the port in a VLAN. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.5,RUCKUS-ACL-MIB::ruckusAclVPortBindName,OCTET,read-create,,current,,Defined ACL name to bind on port in a VLAN in the given direction. +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.6,RUCKUS-ACL-MIB::ruckusAclVPortBindLog,INTEGER,read-create,,current,true(1):false(2),Enable or disable logging on the port in a VLAN for this ACL. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.7,RUCKUS-ACL-MIB::ruckusAclVPortBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the binding of IPv4 or IPv6 or MAC ACL on a port in a given VLAN. Setting this object to destroy(6) unbinds this IPv4 or IPv6 or MAC ACL from the port in the given VLAN. Other values are ignored. +.1.3.6.1.4.1.1991.1.1.3.45.2,RUCKUS-ACL-MIB::ruckusAclConformance,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.2.1,RUCKUS-ACL-MIB::ruckusAclCompliances,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.2.1.1,RUCKUS-ACL-MIB::ruckusAclCompliance,,,,,,The compliance statement for entities which implement RUCKUS-ACL-MIB. +.1.3.6.1.4.1.1991.1.1.3.45.2.2,RUCKUS-ACL-MIB::ruckusAclGroups,,,,,, +.1.3.6.1.4.1.1991.1.1.3.45.2.2.1,RUCKUS-ACL-MIB::ruckusAclGroup,,,,,,A collection of objects that provide ACL information on a given unit. +.1.3.6.1.4.1.1991.1.1.3.46,RUCKUS-DHCPCLIENT-MIB::ruckusDhcpClientMIB,,,,,, Copyright 2020 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. +.1.3.6.1.4.1.1991.1.1.3.46.1,RUCKUS-DHCPCLIENT-MIB::ruckusDhcpClientGlobalObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.46.1.1,RUCKUS-DHCPCLIENT-MIB::ruckusDhcpClientGlobalConfigState,INTEGER,read-write,,current,disabled(0):enabled(1),Configure state for DHCP client on the global level. enabled(1) - DHCPv4 client is enabled. disabled(0) - DHCPv4 client is disabled. Note: DHCPv4 server should be disabled when enabling DHCP client. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.3.46.1.2,RUCKUS-DHCPCLIENT-MIB::ruckusDhcpClientGlobalAutoUpdateConfigState,INTEGER,read-write,,current,disabled(0):enabled(1),Configure state for DHCP client auto-update on the global level. enabled(1) - DHCPv4 client auto-update is enabled. disabled(0) - DHCPv4 client auto-update is disabled. DEFVAL { enabled } +.1.3.6.1.4.1.1991.1.1.3.46.1.3,RUCKUS-DHCPCLIENT-MIB::ruckusDhcpClientSpecificVEPort,Integer32,read-write,,current,,Configure state of DHCP client on specific VE at the global level. If DHCP client is configured at specific VE, ifIndex of the DHCP client enabled VE port is returned. If DHCP Client is not configured on VE port, zero is returned. Note: DHCPv4 client should be enabled globally when enabling DHCP client on specific VE. In switch, the feature is not supported and zero value will be returned for this OID. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.1.3.47,RUCKUS-NDI-MIB::ruckusNdiMIB,,,,,,Management Information for configuration of Neighbour Discovery inspection feature. NDI is a security mechanism which validates all ND packets in a subnet and discard those packets with invalid IPv6 to MAC address bindings. Copyright 1996-2020 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.47.0,RUCKUS-NDI-MIB::ruckusNdiNotify,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.1,RUCKUS-NDI-MIB::ruckusNdiObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.1.1,RUCKUS-NDI-MIB::ruckusNdiVlan,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.1.1.1,RUCKUS-NDI-MIB::ruckusNdiVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control Neighbor Discovery Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. +.1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1,RUCKUS-NDI-MIB::ruckusNdiVlanConfigEntry,,not-accessible,ruckusNdiVlanConfigVlanId,current,,A row instance contains the configuration to enable or disable Neighbor Discovery Inspection at the existing VLAN. +.1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1.1,RUCKUS-NDI-MIB::ruckusNdiVlanConfigVlanId,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which Neighbor Discovery Inspection feature is configured. +.1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1.2,RUCKUS-NDI-MIB::ruckusNdiVlanDynNDInspectionEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether Neighbor Discovery Inspection is enabled in this VLAN. If this object is set to 'true', Neighbor Discovery Inspection is enabled. If this object is set to 'false', Neighbor Discovery Inspection is disabled. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.47.1.2,RUCKUS-NDI-MIB::ruckusNdiInterface,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.1.2.1,RUCKUS-NDI-MIB::ruckusNdInspectIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for Neighbor Discovery Inspection purpose at each physical interface. +.1.3.6.1.4.1.1991.1.1.3.47.1.2.1.1,RUCKUS-NDI-MIB::ruckusNdiIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable trust state for Neighbor Discovery Inspection at each physical interface capable of this feature. +.1.3.6.1.4.1.1991.1.1.3.47.1.2.1.1.1,RUCKUS-NDI-MIB::ruckusNdiIfTrustValue,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for Neighbor Discovery Inspection. If this object is set to 'true', the interface is trusted. ND packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ND packets received on this interface will be subjected to ND inspection. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.47.1.3,RUCKUS-NDI-MIB::ruckusNdiNDInspect,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectTable,,not-accessible,,current,,A table provides the mechanism to control Neighbor Discovery Inspection entries created by the user. When an IP-MAC mapping entry is created in a device supporting this table, a corresponding entry of this table will be added. +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectEntry,,not-accessible,ruckusNdiStaticNDInspectIpv6Addr,current,,A row instance contains the configuration to map a device IP address with its MAC address. +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.1,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectIpv6Addr,OCTET,not-accessible,,current,,The device IPv6 address. +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.2,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectMacAddr,OCTET,read-create,,current,,The device MAC address. +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.3,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectType,INTEGER,read-only,,current,other(1):static(2):dynamic(3):inspect(4):dhcpv6(5):dynamicDhcpv6(6):staticDhcpv6(7):host(8),The type of the ND entry +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.4,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectState,INTEGER,read-only,,current,other(1):valid(2):pend(3),The state of the ND entry +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.5,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectAge,Unsigned32,read-only,,current,,The timer of the ND entry +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.6,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectPort,Integer32,read-only,,current,,The ifindex vlaue of a port of the ND entry +.1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.7,RUCKUS-NDI-MIB::ruckusNdiStaticNDInspectRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the entry in the table. +.1.3.6.1.4.1.1991.1.1.3.47.2,RUCKUS-NDI-MIB::ruckusNdiConformance,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.2.1,RUCKUS-NDI-MIB::ruckusNdiCompliances,,,,,, +.1.3.6.1.4.1.1991.1.1.3.47.2.1.1,RUCKUS-NDI-MIB::ruckusNdiCompliance,,,,,,The compliance statement for entities which implement RUCKUS-NDI-MIB. +.1.3.6.1.4.1.1991.1.1.3.48,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopMIB,,,,,,Management Information for configuration of DHCPv6 Snooping feature. DHCPv6 Snooping is a security feature which enables the device to filter untrusted DHCPv6 packets in a subnet. It can also stop unauthorized DHCPv6 serves and prevent errors due to user mis-configuration servers. Copyright 1996-2020 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.48.0,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopNotify,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopGlobalObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopGlobalClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears all entries in the DHCPv6 binding database. +.1.3.6.1.4.1.1991.1.1.3.48.1.2,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopVlan,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1.2.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control DHCPv6 Snooping per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. +.1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopVlanConfigEntry,,not-accessible,ruckusDhcpv6SnoopVlanConfigVLanId,current,,A row instance contains the configuration to enable or disable DHCPv6 Snooping at the existing VLAN. +.1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopVlanConfigVLanId,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCP Snooping feature is configured. +.1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1.2,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCPv6 Snooping is enabled in this VLAN. If this object is set to 'true', DHCPv6 Snooping is enabled. If this object is set to 'false', DHCPv6 Snooping is disabled. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.48.1.3,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopInterface,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1.3.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for DHCPv6 Snooping purpose at each physical interface. +.1.3.6.1.4.1.1991.1.1.3.48.1.3.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration to enable or disable trust state for DHCPv6 Snooping at each physical interface capable of this feature. +.1.3.6.1.4.1.1991.1.1.3.48.1.3.1.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopIfConfigTrustValue,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the interface is trusted for DHCPv6 Snooping. If this object is set to 'true', the interface is trusted. DHCPv6 packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. DHCPv6 packets received on this interface will be subjected to DHCPv6 checks. DEFVAL { false } +.1.3.6.1.4.1.1991.1.1.3.48.1.4,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBind,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindTable,,not-accessible,,current,,A table provides the information of DHCPv6 snooping binding database learnt by the device +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindEntry,,not-accessible,ruckusDhcpv6SnoopBindMacAddr:ruckusDhcpv6SnoopBindVlanId,current,,A row instance contains the information of DHCPv6 snoonping entry. +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindMacAddr,OCTET,not-accessible,,current,,The device MAC address. +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.2,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindVlanId,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCPv6 snooping feature is configured. +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.3,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindIpAddr,OCTET,read-only,,current,,The device IP address. +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.4,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindType,INTEGER,read-only,,current,other(1):static(2):dynamic(3):inspect(4):dhcpv6(5):dynamicDhcpv6(6):staticDhcpv6(7):host(8),The type of the ND entry +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.5,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindState,INTEGER,read-only,,current,other(1):valid(2):pend(3),The state of the ND entry +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.6,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindPort,Integer32,read-only,,current,,The port of the ND entry +.1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.7,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopBindClearOper,INTEGER,read-write,,current,valid(0):clear(1),valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCPv6 binding database. +.1.3.6.1.4.1.1991.1.1.3.48.2,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopConformance,,,,,, +.1.3.6.1.4.1.1991.1.1.3.48.2.1,RUCKUS-DHCPV6-SNOOPING-MIB::ruckusDhcpv6SnoopCompliance,,,,,,The compliance statement for entities which implement RUCKUS-DHCPv6Snoop-MIB. +.1.3.6.1.4.1.1991.1.1.3.49,RUCKUS-VXLAN-MIB::ruckusVxlanMIB,,,,,,Management Information for configuration of VxLAN feature. VxLAN is a Layer 3 feature which helps to extend a Local Area Network over devices which are separated over different subnets. Copyright 1996-2021 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.3.49.1,RUCKUS-VXLAN-MIB::ruckusVxlanObjects,,,,,, +.1.3.6.1.4.1.1991.1.1.3.49.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGateway,,,,,, +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayTable,,not-accessible,,current,,This table provides the general configuration details related to an overlay gateway. When a new overlay Gateway is created a new entry will be added in this table +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayEntry,,not-accessible,ruckusVxlanOverlayGatewayName,current,,An row instance of the Overlay Gateway table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayName,OCTET,read-only,,current,,VxLAN Overlay Gateway Name +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayType,INTEGER,read-write,,current,none(0):l2Extension(1),VxLAN Overlay Gateway Name Type Only Type Supported is: 1 - Layer2-Extension +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.3,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayLoopbackId,Integer32,read-write,,current,,VxLAN Overlay Gateway Loopback ID +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.4,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayMappedVlans,Integer32,read-only,,current,,VxLAN Overlay Gateway Number of Mapped Vlans +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.5,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayExtendedSites,Integer32,read-only,,current,,VxLAN Overlay Gateway Number of Extended Sites +.1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.6,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapTable,,not-accessible,,current,,This table provides the information related to the vlan - vni mapping which is included in an overlay gateway If a new vlan- vni mapping is introduced in an overlay gateway then a new entry will be added to the table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapEntry,,not-accessible,ruckusVxlanOverlayGatewayName:ruckusVxlanOverlayGatewayVlanMapVlanId,current,,An row instance of the Overlay Gateway Vlan Map table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapVlanId,Integer32,read-only,,current,,Vlan Index of the VLAN - VNI Mapping +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapVniId,Integer32,read-write,,current,,VNI Index of the VLAN - VNI Mapping +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.3,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapVfiId,Integer32,read-only,,current,,VFI Index of the VLAN - VNI Mapping +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.4,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapCrossConnect,INTEGER,read-only,,current,disabled(0):enabled(1),The Cross-Connect Setting for a VLAN-VNI Mapping 0 - If Cross-Connect Setting is Disabled 1 - If Cross-Connect Setting is Enabled +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.5,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapStatistics,INTEGER,read-only,,current,disabled(0):enabled(1),The VXLAN Statistics for a VLAN-VNI Mapping 0 - If Setting is Disabled 1 - If Setting is Enabled +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.6,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapAccessPortCount,Integer32,read-only,,current,,Number of Access Ports Added to the VLAN +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.7,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapExtendedSite,Integer32,read-only,,current,,Number of Sites the VLAN - VNI Mapping is extended to +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.8,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.9,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInUnicastPackets,Counter64,read-only,,current,,Number of incoming unicast packets on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.10,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInUnicastBytes,Counter64,read-only,,current,,Number of incoming unicast bytes on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.11,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInMulticastPackets,Counter64,read-only,,current,,Number of incoming multicast packets on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.12,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes,Counter64,read-only,,current,,Number of incoming multicast bytes on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.13,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets,Counter64,read-only,,current,,Number of incoming broadcast packets on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.14,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes,Counter64,read-only,,current,,Number of incoming broadcast bytes on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.15,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapOutPackets,Counter64,read-only,,current,,Number of outgoing packets on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.16,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewayVlanMapOutBytes,Counter64,read-only,,current,,Number of outgoing bytes on the VNI +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteTable,,not-accessible,,current,,This table provides the information related to the external site which is extended by an overlay-gateway If a new site is extended by an overlay gateway then a new entry will be added to the table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteEntry,,not-accessible,ruckusVxlanOverlayGatewayName:ruckusVxlanOverlayGatewaySiteName,current,,An row instance of the Overlay Gateway Site table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteName,OCTET,read-only,,current,,VxLAN Extended Site Name +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpAddress,IpAddress,read-write,,current,,VxLAN Extended Site's IP Address +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.3,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteStatus,INTEGER,read-only,,current,true(1):false(2),VxLAN Extended Site's Status True - If Site is up False - If Site is Down +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.4,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.5,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInUnicastPackets,Counter64,read-only,,current,,Number of incoming unicast packets on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.6,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInUnicastBytes,Counter64,read-only,,current,,Number of incoming unicast bytes on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.7,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInMulticastPackets,Counter64,read-only,,current,,Number of incoming multicast packets on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.8,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInMutlticastBytes,Counter64,read-only,,current,,Number of incoming multicast bytes on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.9,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInBroadcastPackets,Counter64,read-only,,current,,Number of incoming broadcast packets on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.10,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteInBroadcastBytes,Counter64,read-only,,current,,Number of incoming broadcast bytes on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.11,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteOutPackets,Counter64,read-only,,current,,Number of outgoing packets on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.12,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteOutBytes,Counter64,read-only,,current,,Number of outgoing bytes on the site's Network Virtual Port +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.13,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteMonitoring,INTEGER,read-only,,current,true(1):false(2),VxLAN Extended Site's Monitoring Status True - If Monitoring is Enabled False - If Monitoring is Disabled +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.14,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteKeepAlive,Integer32,read-write,,current,,VxLAN Extended Site's Monitoring Mechanism Keep-Alive Value The Interval after which an ICMP Ping is sent +.1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.15,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteRetry,Integer32,read-write,,current,,VxLAN Extended Site's Monitoring Mechanism Retry Value The Number of times the ICMP Pings will be sent to the extended site IP. If a response is not received after these many retries the remote IP is considered unreachable +.1.3.6.1.4.1.1991.1.1.3.49.1.1.4,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteExtVlanTable,,not-accessible,,current,,This table provides the information related to the vlans which are extended to an external site which is extended by an overlay-gateway If a new vlan is extended to site in an overlay gateway then a new entry will be added to the table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteExtVlanEntry,,not-accessible,ruckusVxlanOverlayGatewayName:ruckusVxlanOverlayGatewaySiteName:ruckusVxlanOverlayGatewaySiteExtVlanId,current,,An row instance of the Overlay Gateway Extended Site Vlan table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteExtVlanId,Integer32,read-only,,current,,Vlan Index extended to the site +.1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteExtVlanRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.3.49.1.1.5,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpListTable,,not-accessible,,current,,This table provides the information related to the IPs which are added to the IP List in the site which is extended by an overlay-gateway. The IP List includes Primary IP and all the secondary IPs with the index If a new IP is added to the IP List in an extended site then a new entry will be added to the table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpListEntry,,not-accessible,ruckusVxlanOverlayGatewayName:ruckusVxlanOverlayGatewaySiteName:ruckusVxlanOverlayGatewaySiteIpListIpIndex,current,,An row instance of the Overlay Gateway Site IP List table. +.1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.1,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpListIpIndex,Integer32,read-only,,current,,Index at which the IP is assigned in the IP List +.1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.2,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpListIpAddress,IpAddress,read-write,,current,,IP Address added to the IP List of the Site +.1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.3,RUCKUS-VXLAN-MIB::ruckusVxlanOverlayGatewaySiteIpListRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.4.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4Gen,,,,,, .1.3.6.1.4.1.1991.1.1.4.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4MaxSessionLimit,INTEGER,read-write,,current,,numbers of maximum session (L4 cache) entries .1.3.6.1.4.1.1991.1.1.4.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4TcpSynLimit,INTEGER,read-write,,current,,Numbers of connection per second @@ -5010,7 +5514,7 @@ .1.3.6.1.4.1.1991.1.1.4.15.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupEntry,,not-accessible,snL4WebCacheGroupId,current,,An entry in the Web Cache Group table. .1.3.6.1.4.1.1991.1.1.4.15.1.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupId,Integer32,read-only,,current,,The identification for a Web Cache Group entry. The limit is from 1 to snL4MaxNumWebCacheGroup. .1.3.6.1.4.1.1991.1.1.4.15.1.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupName,OCTET,read-write,,current,,Web Cache Group name. -.1.3.6.1.4.1.1991.1.1.4.15.1.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupWebCacheIpList,OCTET,read-write,,current,,A list of the Server Cache Group Real Server IP Address. The number of IP Address is from 1 (4 OCTETs) to the snL4MaxNumServersPerWebCacheGroup, maximum number of server IP Address allowed in the list. +.1.3.6.1.4.1.1991.1.1.4.15.1.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupWebCacheIpList,OCTET,read-write,,current,,A list of the Server Cache Group Real Server IP Address. The number of IP Address is from 1 (4 OCTETs) to the snL4MaxNumServersPerWebCacheGroup, maximum number of server IP Address allowed in the list. .1.3.6.1.4.1.1991.1.1.4.15.1.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupDestMask,IpAddress,read-write,,current,,Cache Server Group Destination Mask. .1.3.6.1.4.1.1991.1.1.4.15.1.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupSrcMask,IpAddress,read-write,,current,,Cache Server Group Source Mask. .1.3.6.1.4.1.1991.1.1.4.15.1.1.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupAdminStatus,INTEGER,read-write,,current,disabled(0):enabled(1),The WEB Cache Group is set either enabled(1)...........activated. disabled(0)..........disabled. @@ -5152,10 +5656,10 @@ .1.3.6.1.4.1.1991.1.1.4.28.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlTable,,not-accessible,,current,,A list of history control entries. .1.3.6.1.4.1.1991.1.1.4.28.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlEntry,,not-accessible,snL4RealServerHistoryControlIndex,current,,A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerHistoryControlInterval object might be named snL4RealServerHistoryControlInterval.2 .1.3.6.1.4.1.1991.1.1.4.28.1.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the snL4RealServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device. -.1.3.6.1.4.1.1991.1.1.4.28.1.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1). -.1.3.6.1.4.1.1991.1.1.4.28.1.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } -.1.3.6.1.4.1.1991.1.1.4.28.1.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When the associated snL4RealServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. -.1.3.6.1.4.1.1991.1.1.4.28.1.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } +.1.3.6.1.4.1.1991.1.1.4.28.1.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1). +.1.3.6.1.4.1.1991.1.1.4.28.1.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } +.1.3.6.1.4.1.1991.1.1.4.28.1.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. When the associated snL4RealServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. +.1.3.6.1.4.1.1991.1.1.4.28.1.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } .1.3.6.1.4.1.1991.1.1.4.28.1.1.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it. .1.3.6.1.4.1.1991.1.1.4.28.1.1.7,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4RealServerHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerHistoryControlEntry will be deleted by the agent if this snL4RealServerHistoryControlEntry is not equal to valid(1). .1.3.6.1.4.1.1991.1.1.4.28.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryTable,,not-accessible,,current,,A list of Ethernet snL4History entries. @@ -5172,10 +5676,10 @@ .1.3.6.1.4.1.1991.1.1.4.28.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlTable,,not-accessible,,current,,A list of history control entries. .1.3.6.1.4.1.1991.1.1.4.28.3.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlEntry,,not-accessible,snL4RealServerPortHistoryControlIndex,current,,A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerPortHistoryControlInterval object might be named snL4RealServerPortHistoryControlInterval.2 .1.3.6.1.4.1.1991.1.1.4.28.3.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the snL4RealServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device. -.1.3.6.1.4.1.1991.1.1.4.28.3.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1). -.1.3.6.1.4.1.1991.1.1.4.28.3.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } -.1.3.6.1.4.1.1991.1.1.4.28.3.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When the associated snL4RealServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. -.1.3.6.1.4.1.1991.1.1.4.28.3.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } +.1.3.6.1.4.1.1991.1.1.4.28.3.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1). +.1.3.6.1.4.1.1991.1.1.4.28.3.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4RealServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } +.1.3.6.1.4.1.1991.1.1.4.28.3.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. When the associated snL4RealServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4RealServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4RealServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. +.1.3.6.1.4.1.1991.1.1.4.28.3.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4RealServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } .1.3.6.1.4.1.1991.1.1.4.28.3.1.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it. .1.3.6.1.4.1.1991.1.1.4.28.3.1.7,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4RealServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerPortHistoryControlEntry will be deleted by the agent if this snL4RealServerPortHistoryControlEntry is not equal to valid(1). .1.3.6.1.4.1.1991.1.1.4.28.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryTable,,not-accessible,,current,,A list of Ethernet snL4History entries. @@ -5192,10 +5696,10 @@ .1.3.6.1.4.1.1991.1.1.4.28.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlTable,,not-accessible,,current,,A list of history control entries. .1.3.6.1.4.1.1991.1.1.4.28.5.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlEntry,,not-accessible,snL4VirtualServerHistoryControlIndex,current,,A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerHistoryControlInterval object might be named snL4VirtualServerHistoryControlInterval.2 .1.3.6.1.4.1.1991.1.1.4.28.5.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the snL4VirtualServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device. -.1.3.6.1.4.1.1991.1.1.4.28.5.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1). -.1.3.6.1.4.1.1991.1.1.4.28.5.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } -.1.3.6.1.4.1.1991.1.1.4.28.5.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When the associated snL4VirtualServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. -.1.3.6.1.4.1.1991.1.1.4.28.5.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } +.1.3.6.1.4.1.1991.1.1.4.28.5.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1). +.1.3.6.1.4.1.1991.1.1.4.28.5.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } +.1.3.6.1.4.1.1991.1.1.4.28.5.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. When the associated snL4VirtualServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. +.1.3.6.1.4.1.1991.1.1.4.28.5.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } .1.3.6.1.4.1.1991.1.1.4.28.5.1.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it. .1.3.6.1.4.1.1991.1.1.4.28.5.1.7,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4VirtualServerHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerHistoryControlEntry will be deleted by the agent if this snL4VirtualServerHistoryControlEntry is not equal to valid(1). .1.3.6.1.4.1.1991.1.1.4.28.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryTable,,not-accessible,,current,,A list of Ethernet snL4History entries. @@ -5211,10 +5715,10 @@ .1.3.6.1.4.1.1991.1.1.4.28.7,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlTable,,not-accessible,,current,,A list of history control entries. .1.3.6.1.4.1.1991.1.1.4.28.7.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlEntry,,not-accessible,snL4VirtualServerPortHistoryControlIndex,current,,A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerPortHistoryControlInterval object might be named snL4VirtualServerPortHistoryControlInterval.2 .1.3.6.1.4.1.1991.1.1.4.28.7.1.1,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the snL4VirtualServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for an interface on the device. -.1.3.6.1.4.1.1991.1.1.4.28.7.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1). -.1.3.6.1.4.1.1991.1.1.4.28.7.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } -.1.3.6.1.4.1.1991.1.1.4.28.7.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When the associated snL4VirtualServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. -.1.3.6.1.4.1.1991.1.1.4.28.7.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } +.1.3.6.1.4.1.1991.1.1.4.28.7.1.2,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlDataSource,OBJECT,read-write,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerPortHistoryControlEntry.This source can be any real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify the instance of the object, defined in the above statistics tables. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1). +.1.3.6.1.4.1.1991.1.1.4.28.7.1.3,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When this object is created or modified, the probe should set snL4VirtualServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources. DEFVAL { 50 } +.1.3.6.1.4.1.1991.1.1.4.28.7.1.4,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsGranted,INTEGER,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. When the associated snL4VirtualServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources.The probe must not lower this value except as a result of a modification to the associated snL4VirtualServerPortHistoryControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow. +.1.3.6.1.4.1.1991.1.1.4.28.7.1.5,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters.It is important to consider the minimum time in which any counter could overflow on a particular media type and set the snL4VirtualServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any media-specific table. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1). DEFVAL { 1800 } .1.3.6.1.4.1.1991.1.1.4.28.7.1.6,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it. .1.3.6.1.4.1.1991.1.1.4.28.7.1.7,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4VirtualServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry will be deleted by the agent if this snL4VirtualServerPortHistoryControlEntry is not equal to valid(1). .1.3.6.1.4.1.1991.1.1.4.28.8,FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryTable,,not-accessible,,current,,A list of Ethernet snL4History entries. @@ -5260,35 +5764,37 @@ .1.3.6.1.4.1.1991.1.1.7.1.1.1.1.4,FDRY-SNTP-MIB::fdrySntpServerVersion,Integer32,read-create,,current,,SNTP server version. DEFVAL { 3 } .1.3.6.1.4.1.1991.1.1.7.1.1.1.1.5,FDRY-SNTP-MIB::fdrySntpServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. .1.3.6.1.4.1.1991.1.1.8,FOUNDRY-SN-ROOT-MIB::fdryRadius,,,,,, -.1.3.6.1.4.1.1991.1.1.8.1,FDRY-RADIUS-MIB::fdryRadiusMIB,,,,,,The Brocade proprietary MIB module for Radius Authentication Servers It has new table combines Ipv4 and Ipv6 Radius Authentication Servers configuration. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.8.1,FDRY-RADIUS-MIB::fdryRadiusMIB,,,,,,The Ruckus Wireless proprietary MIB module for Radius Authentication Servers It has new table combines Ipv4 and Ipv6 Radius Authentication Servers configuration. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.8.1.1,FDRY-RADIUS-MIB::fdryRadiusServer,,,,,, -.1.3.6.1.4.1.1991.1.1.8.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerTable,,not-accessible,,current,,Radius server table, listing the RADIUS authentication servers. This table is currently supported by FastIron platform. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerEntry,,not-accessible,fdryRadiusServerIndex,current,,An entry in the Radius server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerIndex,Unsigned32,not-accessible,,current,,The index to the Radius server Table. FastIron platform supports upto 8 servers. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.2,FDRY-RADIUS-MIB::fdryRadiusServerAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Radius server IP address Type. FastIron supports address types of ipv4(1) and ipv6(2). DEFVAL { ipv4 } +.1.3.6.1.4.1.1991.1.1.8.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerTable,,not-accessible,,current,,Radius server table, listing the RADIUS authentication servers +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerEntry,,not-accessible,fdryRadiusServerIndex,current,,An entry in the Radius server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.1,FDRY-RADIUS-MIB::fdryRadiusServerIndex,Unsigned32,not-accessible,,current,,The index to the Radius server Table. Maximum 8 Radius servers are supported. +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.2,FDRY-RADIUS-MIB::fdryRadiusServerAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Radius server IP address Type. Supported address types are ipv4(1) and ipv6(2) DEFVAL { ipv4 } .1.3.6.1.4.1.1991.1.1.8.1.1.1.1.3,FDRY-RADIUS-MIB::fdryRadiusServerAddr,OCTET,read-create,,current,,Radius server IP address. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.4,FDRY-RADIUS-MIB::fdryRadiusServerAuthPort,Unsigned32,read-create,,current,,Authentication UDP port number. FastIron platform supports default value 1645. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.5,FDRY-RADIUS-MIB::fdryRadiusServerAcctPort,Unsigned32,read-create,,current,,Account UDP port number. FastIron platform supports default value 1646. -.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.6,FDRY-RADIUS-MIB::fdryRadiusServerRowKey,OCTET,read-create,,current,,Authentication key displayed as encrypted text. FastIron platform supports keysize upto 32 characters. +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.4,FDRY-RADIUS-MIB::fdryRadiusServerAuthPort,Unsigned32,read-create,,current,,Authentication UDP port number. DEFVAL { 1645 } +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.5,FDRY-RADIUS-MIB::fdryRadiusServerAcctPort,Unsigned32,read-create,,current,,Account UDP port number. DEFVAL { 1646 } +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.6,FDRY-RADIUS-MIB::fdryRadiusServerRowKey,OCTET,read-create,,current,,Authentication key displayed as encrypted text. .1.3.6.1.4.1.1991.1.1.8.1.1.1.1.7,FDRY-RADIUS-MIB::fdryRadiusServerUsage,INTEGER,read-create,,current,default(1):authenticationOnly(2):authorizationOnly(3):accountingOnly(4),To allow this server to be dedicated for a particular AAA activity. DEFVAL { default } .1.3.6.1.4.1.1991.1.1.8.1.1.1.1.8,FDRY-RADIUS-MIB::fdryRadiusServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.9,FDRY-RADIUS-MIB::fdryRadiusServerAuthType,OCTET,read-create,,current,,To allow this server to support dot1x/mac-auth/web-auth 0 - mac-auth 1 - dot1x 2 - web-auth +.1.3.6.1.4.1.1991.1.1.8.1.1.1.1.10,FDRY-RADIUS-MIB::fdryRadiusServerPriority,Unsigned32,read-create,,current,,Radius server priority 0-7. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.1.9,FOUNDRY-SN-ROOT-MIB::fdryTacacs,,,,,, -.1.3.6.1.4.1.1991.1.1.9.1,FDRY-TACACS-MIB::fdryTacacsMIB,,,,,,The Brocade proprietary MIB module for Tacacs Authentication Servers It has new table combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.9.1,FDRY-TACACS-MIB::fdryTacacsMIB,,,,,,The Ruckus Wireless proprietary MIB module for Tacacs Authentication Servers It has new table combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.9.1.1,FDRY-TACACS-MIB::fdryTacacsServer,,,,,, -.1.3.6.1.4.1.1991.1.1.9.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerTable,,not-accessible,,current,,Tacacs server table, listing the Tacacs authentication servers. This table is currently supported by FastIron platform. -.1.3.6.1.4.1.1991.1.1.9.1.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerEntry,,not-accessible,fdryTacacsServerIndex,current,,An entry in the Tacacs server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. -.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerIndex,Unsigned32,not-accessible,,current,,The index to the Tacacs server Table. FastIron platform supports upto 8 servers. -.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.2,FDRY-TACACS-MIB::fdryTacacsServerAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Tacacs server IP address Type. FastIron supports address types of ipv4(1) and ipv6(2). DEFVAL { ipv4 } +.1.3.6.1.4.1.1991.1.1.9.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerTable,,not-accessible,,current,,Tacacs server table, listing the Tacacs authentication servers +.1.3.6.1.4.1.1991.1.1.9.1.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerEntry,,not-accessible,fdryTacacsServerIndex,current,,An entry in the Tacacs server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. +.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.1,FDRY-TACACS-MIB::fdryTacacsServerIndex,Unsigned32,not-accessible,,current,,The index to the Tacacs server Table, Maximum 8 Tacacs servers are supported. +.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.2,FDRY-TACACS-MIB::fdryTacacsServerAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Tacacs server IP address Type. Supported address types are ipv4(1) and ipv6(2) DEFVAL { ipv4 } .1.3.6.1.4.1.1991.1.1.9.1.1.1.1.3,FDRY-TACACS-MIB::fdryTacacsServerAddr,OCTET,read-create,,current,,Tacacs server IP address. .1.3.6.1.4.1.1991.1.1.9.1.1.1.1.4,FDRY-TACACS-MIB::fdryTacacsServerAuthPort,Unsigned32,read-create,,current,,Authentication UDP port number. DEFVAL { 49 } -.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.5,FDRY-TACACS-MIB::fdryTacacsServerRowKey,OCTET,read-create,,current,,Authentication key displayed as encrypted text. FastIron platform supports keysize upto 32 characters. +.1.3.6.1.4.1.1991.1.1.9.1.1.1.1.5,FDRY-TACACS-MIB::fdryTacacsServerRowKey,OCTET,read-create,,current,,Authentication key displayed as encrypted text. .1.3.6.1.4.1.1991.1.1.9.1.1.1.1.6,FDRY-TACACS-MIB::fdryTacacsServerUsage,INTEGER,read-create,,current,default(1):authenticationOnly(2):authorizationOnly(3):accountingOnly(4),To allow this server to be dedicated for a particular AAA activity. DEFVAL { default } .1.3.6.1.4.1.1991.1.1.9.1.1.1.1.7,FDRY-TACACS-MIB::fdryTacacsServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. .1.3.6.1.4.1.1991.1.1.10,FOUNDRY-SN-ROOT-MIB::fdryTrap,,,,,, -.1.3.6.1.4.1.1991.1.1.10.1,FDRY-TRAP-MIB::fdryTrapMIB,,,,,,The Brocade proprietary MIB module for Traps. It has new table combines Ipv4 and Ipv6 configuration of trap Receiver/managers which to send traps. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.1.10.1,FDRY-TRAP-MIB::fdryTrapMIB,,,,,,The Ruckus Wireless proprietary MIB module for Traps. It has new table combines Ipv4 and Ipv6 configuration of trap Receiver/managers which to send traps. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.1.10.1.1,FDRY-TRAP-MIB::fdryTrapReceiver,,,,,, .1.3.6.1.4.1.1991.1.1.10.1.1.1,FDRY-TRAP-MIB::fdryTrapReceiverTable,,not-accessible,,current,,Trap Receiver table. -.1.3.6.1.4.1.1991.1.1.10.1.1.1.1,FDRY-TRAP-MIB::fdryTrapReceiverEntry,,not-accessible,fdryTrapReceiverIndex,current,,An entry in the Trap Receiver table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. +.1.3.6.1.4.1.1991.1.1.10.1.1.1.1,FDRY-TRAP-MIB::fdryTrapReceiverEntry,,not-accessible,fdryTrapReceiverIndex,current,,An entry in the Trap Receiver table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers. .1.3.6.1.4.1.1991.1.1.10.1.1.1.1.1,FDRY-TRAP-MIB::fdryTrapReceiverIndex,Unsigned32,not-accessible,,current,,The index to the Trap Receiver Table. .1.3.6.1.4.1.1991.1.1.10.1.1.1.1.2,FDRY-TRAP-MIB::fdryTrapReceiverAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Trap Receiver IP address Type. Supported address types are ipv4(1) and ipv6(2) DEFVAL { ipv4 } .1.3.6.1.4.1.1991.1.1.10.1.1.1.1.3,FDRY-TRAP-MIB::fdryTrapReceiverAddr,OCTET,read-create,,current,,Trap Receiver IP address. @@ -5508,17 +6014,17 @@ .1.3.6.1.4.1.1991.1.2.1.12.1.1.6,FOUNDRY-SN-IPX-MIB::snIpxPortCountersTxDropPktsCnt,Counter32,read-only,,current,,IPX transmitting drop packets counter for the interface. .1.3.6.1.4.1.1991.1.2.1.12.1.1.7,FOUNDRY-SN-IPX-MIB::snIpxPortCountersRcvFiltPktsCnt,Counter32,read-only,,current,,IPX receiving filter packets counter for the interface. .1.3.6.1.4.1.1991.1.2.1.12.1.1.8,FOUNDRY-SN-IPX-MIB::snIpxPortCountersTxFiltPktsCnt,Counter32,read-only,,current,,IPX transmitting filter packets counter for the interface. -.1.3.6.1.4.1.1991.1.2.2,FOUNDRY-SN-ROOT-MIB::snIp,,,,,, +.1.3.6.1.4.1.1991.1.2.2,FOUNDRY-SN-IP-MIB::snIp,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.2.2.1,FOUNDRY-SN-IP-MIB::snRtIpGeneral,,,,,, .1.3.6.1.4.1.1991.1.2.2.1.1,FOUNDRY-SN-IP-MIB::snRtClearArpCache,INTEGER,read-write,,current,normal(0):clear(1),clear(1) will clear arp cache table. .1.3.6.1.4.1.1991.1.2.2.1.2,FOUNDRY-SN-IP-MIB::snRtClearIpCache,INTEGER,read-write,,current,normal(0):clear(1),clear(1) will clear ip route cache table. .1.3.6.1.4.1.1991.1.2.2.1.3,FOUNDRY-SN-IP-MIB::snRtClearIpRoute,INTEGER,read-write,,current,normal(0):clear(1),clear(1) will clear ip route table. .1.3.6.1.4.1.1991.1.2.2.1.4,FOUNDRY-SN-IP-MIB::snRtBootpServer,IpAddress,read-write,,deprecated,,IP address of bootp server to which bootp packet need to be relayed. -.1.3.6.1.4.1.1991.1.2.2.1.5,FOUNDRY-SN-IP-MIB::snRtBootpRelayMax,INTEGER,read-write,,current,,Maximum number of hop the bootp packet should travel. -.1.3.6.1.4.1.1991.1.2.2.1.6,FOUNDRY-SN-IP-MIB::snRtArpAge,INTEGER,read-write,,current,,The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. +.1.3.6.1.4.1.1991.1.2.2.1.5,FOUNDRY-SN-IP-MIB::snRtBootpRelayMax,INTEGER,read-write,,current,,Maximum number of hop the bootp packet should travel. +.1.3.6.1.4.1.1991.1.2.2.1.6,FOUNDRY-SN-IP-MIB::snRtArpAge,INTEGER,read-write,,current,,The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. .1.3.6.1.4.1.1991.1.2.2.1.7,FOUNDRY-SN-IP-MIB::snRtIpIrdpEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Perform router advertisement on this box. .1.3.6.1.4.1.1991.1.2.2.1.8,FOUNDRY-SN-IP-MIB::snRtIpLoadShare,INTEGER,read-write,,current,disabled(0):enabled(1),If more than one route available, use them to share load. -.1.3.6.1.4.1.1991.1.2.2.1.9,FOUNDRY-SN-IP-MIB::snRtIpProxyArp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable proxy arp function in the box. +.1.3.6.1.4.1.1991.1.2.2.1.9,FOUNDRY-SN-IP-MIB::snRtIpProxyArp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable proxy arp function in the box. .1.3.6.1.4.1.1991.1.2.2.1.10,FOUNDRY-SN-IP-MIB::snRtIpRarp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable RARP server. .1.3.6.1.4.1.1991.1.2.2.1.11,FOUNDRY-SN-IP-MIB::snRtIpTtl,INTEGER,read-write,,current,,The time to live value to be used in IP header of IP packet generated by the box. .1.3.6.1.4.1.1991.1.2.2.1.12,FOUNDRY-SN-IP-MIB::snRtIpSetAllPortConfig,Integer32,read-write,,current,,The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest of the rows in snRtIpPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip interface configuration table. The previous setting will be overwritten by the new one. @@ -5532,14 +6038,14 @@ .1.3.6.1.4.1.1991.1.2.2.1.20,FOUNDRY-SN-IP-MIB::snRtIpProtocolRouterId,IpAddress,read-write,,current,,Router Id for all IP Protocols. .1.3.6.1.4.1.1991.1.2.2.1.21,FOUNDRY-SN-IP-MIB::snRtIpSourceRoute,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable source routing support, ability to drop the source routing packets. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.2.2.2,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteTable,,not-accessible,,current,,IP static/default route table. -.1.3.6.1.4.1.1991.1.2.2.2.1,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteEntry,,not-accessible,snRtIpStaticRouteIndex,current,,An entry in the IP static route table. -.1.3.6.1.4.1.1991.1.2.2.2.1.1,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteIndex,Integer32,read-only,,current,,The table index for a static route entry. -.1.3.6.1.4.1.1991.1.2.2.2.1.2,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteDest,IpAddress,read-write,,current,,Destination IP address. 0.0.0.0 for default route. -.1.3.6.1.4.1.1991.1.2.2.2.1.3,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteMask,IpAddress,read-write,,current,,Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. -.1.3.6.1.4.1.1991.1.2.2.2.1.4,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteNextHop,IpAddress,read-write,,current,,IP address of next hop router that is located on one of the directly attached IP subnet. -.1.3.6.1.4.1.1991.1.2.2.2.1.5,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteMetric,Integer32,read-write,,current,,The metrics to next hop router. -.1.3.6.1.4.1.1991.1.2.2.2.1.6,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a static route entry. -.1.3.6.1.4.1.1991.1.2.2.2.1.7,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteDistance,INTEGER,read-write,,current,,Administration distance. +.1.3.6.1.4.1.1991.1.2.2.2.1,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteEntry,,not-accessible,snRtIpStaticRouteDest:snRtIpStaticRouteMask,current,,An entry in the IP static route table. +.1.3.6.1.4.1.1991.1.2.2.2.1.1,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteDest,IpAddress,read-write,,current,,Destination IP address. 0.0.0.0 for default route. +.1.3.6.1.4.1.1991.1.2.2.2.1.2,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteMask,IpAddress,read-write,,current,,Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. +.1.3.6.1.4.1.1991.1.2.2.2.1.3,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteNextHop,IpAddress,read-write,,current,,IP address of next hop router that is located on one of the directly attached IP subnet. +.1.3.6.1.4.1.1991.1.2.2.2.1.4,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteMetric,Integer32,read-write,,current,,The metrics to next hop router. +.1.3.6.1.4.1.1991.1.2.2.2.1.5,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a static route entry. +.1.3.6.1.4.1.1991.1.2.2.2.1.6,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteDistance,INTEGER,read-write,,current,,Administration distance. +.1.3.6.1.4.1.1991.1.2.2.2.1.7,FOUNDRY-SN-IP-MIB::snRtIpStaticRouteOutgoingInterface,Integer32,read-only,,current,,The outgoing interface of a static route. Use the ifIndex value here to specify the outgoing interface. Value of 0 indicates that outgoing interface has not been configured for a static route. .1.3.6.1.4.1.1991.1.2.2.3,FOUNDRY-SN-IP-MIB::snRtIpFilterTable,,not-accessible,,current,,IP filter table. .1.3.6.1.4.1.1991.1.2.2.3.1,FOUNDRY-SN-IP-MIB::snRtIpFilterEntry,,not-accessible,snRtIpFilterIndex,current,,An entry in the IP filter table. .1.3.6.1.4.1.1991.1.2.2.3.1.1,FOUNDRY-SN-IP-MIB::snRtIpFilterIndex,Integer32,read-only,,current,,The table index for a filter entry. @@ -5550,7 +6056,7 @@ .1.3.6.1.4.1.1991.1.2.2.3.1.6,FOUNDRY-SN-IP-MIB::snRtIpFilterDestIp,IpAddress,read-write,,current,,Destination IP address. .1.3.6.1.4.1.1991.1.2.2.3.1.7,FOUNDRY-SN-IP-MIB::snRtIpFilterDestMask,IpAddress,read-write,,current,,Destination IP subnet mask. .1.3.6.1.4.1.1991.1.2.2.3.1.8,FOUNDRY-SN-IP-MIB::snRtIpFilterOperator,INTEGER,read-write,,current,greater(1):equal(2):less(3):notEqual(4),Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number -.1.3.6.1.4.1.1991.1.2.2.3.1.9,FOUNDRY-SN-IP-MIB::snRtIpFilterOperand,INTEGER,read-write,,current,,For now this only refers to transport protocol port number. 0 means NA +.1.3.6.1.4.1.1991.1.2.2.3.1.9,FOUNDRY-SN-IP-MIB::snRtIpFilterOperand,INTEGER,read-write,,current,,For now this only refers to transport protocol port number. 0 means NA .1.3.6.1.4.1.1991.1.2.2.3.1.10,FOUNDRY-SN-IP-MIB::snRtIpFilterRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a filter entry. .1.3.6.1.4.1.1991.1.2.2.3.1.11,FOUNDRY-SN-IP-MIB::snRtIpFilterEstablished,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. .1.3.6.1.4.1.1991.1.2.2.3.1.12,FOUNDRY-SN-IP-MIB::snRtIpFilterQosPriority,INTEGER,read-write,,current,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The router L4 Qos Priority values are: low(0) -- low prority high(1) -- high prority. The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) @@ -5578,7 +6084,7 @@ .1.3.6.1.4.1.1991.1.2.2.7.1,FOUNDRY-SN-IP-MIB::snRtIpPortAccessEntry,,not-accessible,snRtIpPortAccessPortIndex:snRtIpPortAccessDirection,deprecated,,An entry in the IP Port access table. .1.3.6.1.4.1.1991.1.2.2.7.1.1,FOUNDRY-SN-IP-MIB::snRtIpPortAccessPortIndex,Integer32,read-only,,deprecated,,The port index for port access entry. .1.3.6.1.4.1.1991.1.2.2.7.1.2,FOUNDRY-SN-IP-MIB::snRtIpPortAccessDirection,INTEGER,read-only,,deprecated,in(1):out(2),The incoming or outgoing check for port access. -.1.3.6.1.4.1.1991.1.2.2.7.1.3,FOUNDRY-SN-IP-MIB::snRtIpPortAccessFilters,OCTET,read-write,,deprecated,,1st octet correspond to 1st filter number and so on. +.1.3.6.1.4.1.1991.1.2.2.7.1.3,FOUNDRY-SN-IP-MIB::snRtIpPortAccessFilters,OCTET,read-write,,deprecated,,1st octet correspond to 1st filter number and so on. .1.3.6.1.4.1.1991.1.2.2.7.1.4,FOUNDRY-SN-IP-MIB::snRtIpPortAccessRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4),To create or delete a port access entry. .1.3.6.1.4.1.1991.1.2.2.8,FOUNDRY-SN-IP-MIB::snRtIpPortConfigTable,,not-accessible,,deprecated,,IP port Config table. .1.3.6.1.4.1.1991.1.2.2.8.1,FOUNDRY-SN-IP-MIB::snRtIpPortConfigEntry,,not-accessible,snRtIpPortConfigPortIndex,deprecated,,An entry in the IP Port Config table. @@ -5613,13 +6119,25 @@ .1.3.6.1.4.1.1991.1.2.2.9.3.2.1.2,FOUNDRY-SN-IP-MIB::snRtUdpIfHelperAddr,IpAddress,not-accessible,,current,,The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.255.255.255 or 0.0.0.0. .1.3.6.1.4.1.1991.1.2.2.9.3.2.1.3,FOUNDRY-SN-IP-MIB::snRtUdpIfHelperAddrType,INTEGER,read-write,,current,unicast(1):broabcast(2),Type of the helper address. It can be unicast or subnet brodcast address. .1.3.6.1.4.1.1991.1.2.2.9.3.2.1.4,FOUNDRY-SN-IP-MIB::snRtUdpIfHelperRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a UDP helper entry. +.1.3.6.1.4.1.1991.1.2.2.9.3.3,FOUNDRY-SN-IP-MIB::snRtIpIfHelperTable,,not-accessible,,current,,IP helper address table. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1,FOUNDRY-SN-IP-MIB::snRtIpIfHelperEntry,,not-accessible,snRtIpIfHelperIfIndex:snRtIpIfHelperAddrIndex,current,,An entry of the IP helper address table. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1.1,FOUNDRY-SN-IP-MIB::snRtIpIfHelperIfIndex,Integer32,not-accessible,,current,,Interface index of the port for an IP helper address entry. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1.2,FOUNDRY-SN-IP-MIB::snRtIpIfHelperAddrIndex,INTEGER,not-accessible,,current,,The helper address table index for an IP helper address entry. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1.3,FOUNDRY-SN-IP-MIB::snRtIpIfHelperAddr,IpAddress,read-write,,current,,The IP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.255.255.255 or 0.0.0.0. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1.4,FOUNDRY-SN-IP-MIB::snRtIpIfHelperAddrType,INTEGER,read-write,,current,unicast(1):broadcast(2),Type of the helper address. It can be unicast or subnet broadcast address. +.1.3.6.1.4.1.1991.1.2.2.9.3.3.1.5,FOUNDRY-SN-IP-MIB::snRtIpIfHelperRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete an IP helper entry. +.1.3.6.1.4.1.1991.1.2.2.9.3.4,FOUNDRY-SN-IP-MIB::snRtIpv6IfHelperTable,,not-accessible,,current,,IPV6 helper address table. +.1.3.6.1.4.1.1991.1.2.2.9.3.4.1,FOUNDRY-SN-IP-MIB::snRtIpv6IfHelperEntry,,not-accessible,snRtIpv6IfHelperIfIndex:snRtIpv6IfHelperAddr,current,,An entry of the IPV6 helper address table. +.1.3.6.1.4.1.1991.1.2.2.9.3.4.1.1,FOUNDRY-SN-IP-MIB::snRtIpv6IfHelperIfIndex,Integer32,not-accessible,,current,,Interface index of the port for an IPV6 helper address entry. +.1.3.6.1.4.1.1991.1.2.2.9.3.4.1.2,FOUNDRY-SN-IP-MIB::snRtIpv6IfHelperAddr,OCTET,not-accessible,,current,,The IPV6 helper address. This is the address that client packets will be forwarded +.1.3.6.1.4.1.1991.1.2.2.9.3.4.1.3,FOUNDRY-SN-IP-MIB::snRtIpv6IfHelperRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete an IPV6IfhelperEntry. .1.3.6.1.4.1.1991.1.2.2.10,FOUNDRY-SN-IP-MIB::snRtIpTraceRoute,,,,,, .1.3.6.1.4.1.1991.1.2.2.10.1,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteGeneral,,,,,, .1.3.6.1.4.1.1991.1.2.2.10.1.1,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteTargetAddr,IpAddress,read-write,,current,,Target IP address of which trace route is performed. .1.3.6.1.4.1.1991.1.2.2.10.1.2,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteMinTtl,INTEGER,read-write,,current,,Minimum TTL value carried in the first probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system. DEFVAL { 1 } .1.3.6.1.4.1.1991.1.2.2.10.1.3,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteMaxTtl,INTEGER,read-write,,current,,Maximum TTL value carried in the last probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system. DEFVAL { 30 } .1.3.6.1.4.1.1991.1.2.2.10.1.4,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteTimeOut,INTEGER,read-write,,current,,Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the system. DEFVAL { 2 } -.1.3.6.1.4.1.1991.1.2.2.10.1.5,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteControl,INTEGER,read-write,,current,start(1):abort(2):success(3):failure(4):inProgress(5),Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned. +.1.3.6.1.4.1.1991.1.2.2.10.1.5,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteControl,INTEGER,read-write,,current,start(1):abort(2):success(3):failure(4):inProgress(5),Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned. .1.3.6.1.4.1.1991.1.2.2.10.2,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteResult,,,,,, .1.3.6.1.4.1.1991.1.2.2.10.2.1,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteResultTable,,not-accessible,,current,,Trace route result table. .1.3.6.1.4.1.1991.1.2.2.10.2.1.1,FOUNDRY-SN-IP-MIB::snRtIpTraceRouteResultEntry,,not-accessible,snRtIpTraceRouteResultIndex,current,,An entry of the trace route result table. @@ -5652,12 +6170,12 @@ .1.3.6.1.4.1.1991.1.2.2.13.1.1,FOUNDRY-SN-IP-MIB::snIpCommunityListIndex,Integer32,read-only,,current,,The table index for a filter entry. .1.3.6.1.4.1.1991.1.2.2.13.1.2,FOUNDRY-SN-IP-MIB::snIpCommunityListSequence,Integer32,read-only,,current,,The table sequence index for a filter entry. .1.3.6.1.4.1.1991.1.2.2.13.1.3,FOUNDRY-SN-IP-MIB::snIpCommunityListAction,INTEGER,read-write,,current,deny(0):permit(1),Action to take if the bgp address match with this filter. -.1.3.6.1.4.1.1991.1.2.2.13.1.4,FOUNDRY-SN-IP-MIB::snIpCommunityListCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. +.1.3.6.1.4.1.1991.1.2.2.13.1.4,FOUNDRY-SN-IP-MIB::snIpCommunityListCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. .1.3.6.1.4.1.1991.1.2.2.13.1.5,FOUNDRY-SN-IP-MIB::snIpCommunityListInternet,INTEGER,read-write,,current,disabled(0):enabled(1),Disabled/Enabled the Internet Community. .1.3.6.1.4.1.1991.1.2.2.13.1.6,FOUNDRY-SN-IP-MIB::snIpCommunityListNoAdvertise,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to any peer (internal or external). .1.3.6.1.4.1.1991.1.2.2.13.1.7,FOUNDRY-SN-IP-MIB::snIpCommunityListNoExport,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to an EBGP peer. .1.3.6.1.4.1.1991.1.2.2.13.1.8,FOUNDRY-SN-IP-MIB::snIpCommunityListRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.2.13.1.9,FOUNDRY-SN-IP-MIB::snIpCommunityListLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. +.1.3.6.1.4.1.1991.1.2.2.13.1.9,FOUNDRY-SN-IP-MIB::snIpCommunityListLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. .1.3.6.1.4.1.1991.1.2.2.14,FOUNDRY-SN-IP-MIB::snIpPrefixListTable,,not-accessible,,current,,Ip Prefix List table. .1.3.6.1.4.1.1991.1.2.2.14.1,FOUNDRY-SN-IP-MIB::snIpPrefixListEntry,,not-accessible,snIpPrefixListName:snIpPrefixListSequence,current,,An entry in the Ip Prefix List table. .1.3.6.1.4.1.1991.1.2.2.14.1.1,FOUNDRY-SN-IP-MIB::snIpPrefixListName,OCTET,read-only,,current,,An octet string of the ip prefix list name, each character of the name is represented by one octet. @@ -5793,12 +6311,12 @@ .1.3.6.1.4.1.1991.1.2.2.17.1.1,FOUNDRY-SN-IP-MIB::snIpCommunityListStringName,OCTET,read-only,,current,,The table index for a filter entry. .1.3.6.1.4.1.1991.1.2.2.17.1.2,FOUNDRY-SN-IP-MIB::snIpCommunityListStringSequence,Integer32,read-only,,current,,The table sequence index for a filter entry. .1.3.6.1.4.1.1991.1.2.2.17.1.3,FOUNDRY-SN-IP-MIB::snIpCommunityListStringAction,INTEGER,read-write,,current,deny(0):permit(1),Action to take if the bgp address match with this filter. -.1.3.6.1.4.1.1991.1.2.2.17.1.4,FOUNDRY-SN-IP-MIB::snIpCommunityListStringCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. This object is valid for standard community list. For extended type, this will return NULL string. The regular expression string for extended type is available at object snIpCommunityListStringRegExpr +.1.3.6.1.4.1.1991.1.2.2.17.1.4,FOUNDRY-SN-IP-MIB::snIpCommunityListStringCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. This object is valid for standard community list. For extended type, this will return NULL string. The regular expression string for extended type is available at object snIpCommunityListStringRegExpr .1.3.6.1.4.1.1991.1.2.2.17.1.5,FOUNDRY-SN-IP-MIB::snIpCommunityListStringInternet,INTEGER,read-write,,current,disabled(0):enabled(1),Disabled/Enabled the Internet Community. Valid only for standard community list. For extended type, 0 is returned. .1.3.6.1.4.1.1991.1.2.2.17.1.6,FOUNDRY-SN-IP-MIB::snIpCommunityListStringNoAdvertise,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to any peer (internal or external). Valid only for standard community list. For extended type, 0 is returned. .1.3.6.1.4.1.1991.1.2.2.17.1.7,FOUNDRY-SN-IP-MIB::snIpCommunityListStringNoExport,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to an EBGP peer. Valid only for standard community list. For extended type, 0 is returned. .1.3.6.1.4.1.1991.1.2.2.17.1.8,FOUNDRY-SN-IP-MIB::snIpCommunityListStringRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.2.17.1.9,FOUNDRY-SN-IP-MIB::snIpCommunityListStringLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. Valid only for standard community list. For extended type, 0 is returned. +.1.3.6.1.4.1.1991.1.2.2.17.1.9,FOUNDRY-SN-IP-MIB::snIpCommunityListStringLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. Valid only for standard community list. For extended type, 0 is returned. .1.3.6.1.4.1.1991.1.2.2.17.1.10,FOUNDRY-SN-IP-MIB::snIpCommunityListStringType,INTEGER,read-write,,current,standard(0):extended(1),Type of the community list, whether standard or extended. Default value is standard. .1.3.6.1.4.1.1991.1.2.2.17.1.11,FOUNDRY-SN-IP-MIB::snIpCommunityListStringRegExpr,OCTET,read-write,,current,,The regular expression string for extended community list. This object will return NULL for standard community list. .1.3.6.1.4.1.1991.1.2.2.18,FOUNDRY-SN-IP-MIB::snRtIpPortIfAddrTable,,not-accessible,,current,,IP port If address table. @@ -5812,7 +6330,7 @@ .1.3.6.1.4.1.1991.1.2.2.19.1,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessEntry,,not-accessible,snRtIpPortIfAccessInterfaceIndex:snRtIpPortIfAccessDirection,current,,An entry in the IP Port access table. .1.3.6.1.4.1.1991.1.2.2.19.1.1,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessInterfaceIndex,Integer32,read-only,,current,,The InterfaceIndex for port access entry. .1.3.6.1.4.1.1991.1.2.2.19.1.2,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessDirection,INTEGER,read-only,,current,in(1):out(2),The incoming or outgoing check for port access. -.1.3.6.1.4.1.1991.1.2.2.19.1.3,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessFilters,OCTET,read-write,,current,,1st octet correspond to 1st filter number and so on. +.1.3.6.1.4.1.1991.1.2.2.19.1.3,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessFilters,OCTET,read-write,,current,,1st octet correspond to 1st filter number and so on. .1.3.6.1.4.1.1991.1.2.2.19.1.4,FOUNDRY-SN-IP-MIB::snRtIpPortIfAccessRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4),To create or delete a port access entry. .1.3.6.1.4.1.1991.1.2.2.20,FOUNDRY-SN-IP-MIB::snRtIpPortIfConfigTable,,not-accessible,,current,,IP port If Config table. .1.3.6.1.4.1.1991.1.2.2.20.1,FOUNDRY-SN-IP-MIB::snRtIpPortIfConfigEntry,,not-accessible,snRtIpPortIfConfigInterfaceIndex,current,,An entry in the IP Port Config table. @@ -5821,7 +6339,6 @@ .1.3.6.1.4.1.1991.1.2.2.20.1.3,FOUNDRY-SN-IP-MIB::snRtIpPortIfEncap,INTEGER,read-write,,current,ethernet(1):snap(2):hdlc(3):ppp(4):other(5),Data link encapsulation to be used on the IP frame transmitted on the port. .1.3.6.1.4.1.1991.1.2.2.20.1.4,FOUNDRY-SN-IP-MIB::snRtIpPortIfMetric,INTEGER,read-write,,current,,The metric. DEFVAL { 1 } .1.3.6.1.4.1.1991.1.2.2.20.1.5,FOUNDRY-SN-IP-MIB::snRtIpPortIfDirBcastFwd,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/Disable directed broadcast forwarding on the port. DEFVAL { enabled } -.1.3.6.1.4.1.1991.1.2.2.20.1.6,FOUNDRY-SN-IP-MIB::snRtIpPortConfigIfDonorInterface,Integer32,read-only,,current,,If this interface is configured as an unnumbered interface, it will return the ifIndex of the donor interface. If this is configured as a donor interface, it will return its own ifIndex value. Otherwise, it will return 0. .1.3.6.1.4.1.1991.1.2.2.21,FOUNDRY-SN-IP-MIB::agIpPortCounterTable,,not-accessible,,current,,IP port counter table to display IP traffic statistics. At present the system supports only IP statistics for Ethernet ports. .1.3.6.1.4.1.1991.1.2.2.21.1,FOUNDRY-SN-IP-MIB::agIpPortCounterEntry,,not-accessible,ifIndex:agIpPortCounterIpVersion,current,,An entry in the IP port counter table. .1.3.6.1.4.1.1991.1.2.2.21.1.1,FOUNDRY-SN-IP-MIB::agIpPortCounterIpVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The version of IP protocol for which this counter entry is returned. This table supports ipv4(1) and ipv6(2) enumerations. @@ -5849,8 +6366,8 @@ .1.3.6.1.4.1.1991.1.2.3.3,FOUNDRY-SN-IP-MIB::snRtIpRipRedisTable,,not-accessible,,current,,IP Rip Redistribution table. .1.3.6.1.4.1.1991.1.2.3.3.1,FOUNDRY-SN-IP-MIB::snRtIpRipRedisEntry,,not-accessible,snRtIpRipRedisIndex,current,,An entry in the IP Rip Redistribution table. .1.3.6.1.4.1.1991.1.2.3.3.1.1,FOUNDRY-SN-IP-MIB::snRtIpRipRedisIndex,INTEGER,read-only,,current,,The table index for a IP Rip Redistribution entry. -.1.3.6.1.4.1.1991.1.2.3.3.1.2,FOUNDRY-SN-IP-MIB::snRtIpRipRedisAction,INTEGER,read-write,,current,deny(0):permit(1),The action to take when match this IP Rip Redistribution entry. -.1.3.6.1.4.1.1991.1.2.3.3.1.3,FOUNDRY-SN-IP-MIB::snRtIpRipRedisProtocol,INTEGER,read-write,,current,other(1):all(2):static(3):ospf(4):bgp(5):isis(6):connected(7),The protocol to be distributed. other(1) cannot be used for SNMP-SET. +.1.3.6.1.4.1.1991.1.2.3.3.1.2,FOUNDRY-SN-IP-MIB::snRtIpRipRedisAction,INTEGER,read-write,,current,deny(0):permit(1),The action to take when match this IP Rip Redistribution entry. +.1.3.6.1.4.1.1991.1.2.3.3.1.3,FOUNDRY-SN-IP-MIB::snRtIpRipRedisProtocol,INTEGER,read-write,,current,other(1):all(2):static(3):ospf(4):bgp(5):isis(6):connected(7),The protocol to be distributed. other(1) cannot be used for SNMP-SET. .1.3.6.1.4.1.1991.1.2.3.3.1.4,FOUNDRY-SN-IP-MIB::snRtIpRipRedisIp,IpAddress,read-write,,current,,The ip address of the ip route to be distributed. 0.0.0.0 - all routes .1.3.6.1.4.1.1991.1.2.3.3.1.5,FOUNDRY-SN-IP-MIB::snRtIpRipRedisMask,IpAddress,read-write,,current,,The ip subnet mask of the ip route to be distributed. .1.3.6.1.4.1.1991.1.2.3.3.1.6,FOUNDRY-SN-IP-MIB::snRtIpRipRedisMatchMetric,INTEGER,read-write,,current,,The metric of the route to be matched to determine the redistribution. 0 - any metric value @@ -5902,22 +6419,22 @@ .1.3.6.1.4.1.1991.1.2.3.9.11,FOUNDRY-SN-IP-MIB::snRtIpRipStatsRespFromNonRipPort,Counter32,read-only,,current,,Number of RIP packet responses coming from non-RIP configured ports. .1.3.6.1.4.1.1991.1.2.3.9.12,FOUNDRY-SN-IP-MIB::snRtIpRipStatsResponseFromLoopback,Counter32,read-only,,current,,Number of RIP packet responses coming from loopback ports. .1.3.6.1.4.1.1991.1.2.3.9.13,FOUNDRY-SN-IP-MIB::snRtIpRipStatsPacketRejected,Counter32,read-only,,current,,Number of RIP packets rejected. -.1.3.6.1.4.1.1991.1.2.4,FOUNDRY-SN-ROOT-MIB::snOspf,,,,,, +.1.3.6.1.4.1.1991.1.2.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspf,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.2.4.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfGen,,,,,, .1.3.6.1.4.1.1991.1.2.4.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRouterId,IpAddress,read-write,,current,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. .1.3.6.1.4.1.1991.1.2.4.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAdminStat,INTEGER,read-write,,current,disabled(0):enabled(1),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. .1.3.6.1.4.1.1991.1.2.4.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfASBdrRtrStatus,INTEGER,read-write,,current,false(0):true(1),A flag to note whether this router is an Autonomous System border router. -.1.3.6.1.4.1.1991.1.2.4.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router. +.1.3.6.1.4.1.1991.1.2.4.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisMode,INTEGER,read-write,,current,disabled(0):enabled(1),The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router. .1.3.6.1.4.1.1991.1.2.4.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfDefaultOspfMetricValue,INTEGER,read-write,,current,,The metric of using a default OSPF Metric value on this route. .1.3.6.1.4.1.1991.1.2.4.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExternLSACount,Gauge32,read-only,,current,,The number of external (LS type 5) link-state advertisements in the link-state database. .1.3.6.1.4.1.1991.1.2.4.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExternLSACksumSum,Integer32,read-only,,current,,The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. .1.3.6.1.4.1.1991.1.2.4.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfOriginateNewLSAs,Counter32,read-only,,current,,The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. .1.3.6.1.4.1.1991.1.2.4.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRxNewLSAs,Counter32,read-only,,current,,The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements. -.1.3.6.1.4.1.1991.1.2.4.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfOspfRedisMetricType,INTEGER,read-write,,current,type1(1):type2(2),type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable value) routes, it is the external metric. -.1.3.6.1.4.1.1991.1.2.4.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExtLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded). +.1.3.6.1.4.1.1991.1.2.4.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfOspfRedisMetricType,INTEGER,read-write,,current,type1(1):type2(2),type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable value) routes, it is the external metric. +.1.3.6.1.4.1.1991.1.2.4.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExtLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded). .1.3.6.1.4.1.1991.1.2.4.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExitOverflowInterval,INTEGER,read-write,,current,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted. .1.3.6.1.4.1.1991.1.2.4.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRfc1583Compatibility,INTEGER,read-write,,current,disabled(0):enabled(1),This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......disable RFC1583 compatibility and compatible to RFC2178. -.1.3.6.1.4.1.1991.1.2.4.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRouterIdFormat,INTEGER,read-write,,current,integer(0):ipAddress(1),This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRouterIdFormat,INTEGER,read-write,,current,integer(0):ipAddress(1),This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.1.15,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfDistance,INTEGER,read-write,,obsolete,,OSPF Adminitrative distance. 0 if distance is not set. .1.3.6.1.4.1.1991.1.2.4.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfDistanceIntra,INTEGER,read-write,,current,,OSPF Adminitrative distance - Intra Area. .1.3.6.1.4.1.1991.1.2.4.1.17,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfDistanceInter,INTEGER,read-write,,current,,OSPF Adminitrative distance - Inter Area. @@ -5926,10 +6443,10 @@ .1.3.6.1.4.1.1991.1.2.4.2.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaTable,,not-accessible,,current,,Information describing the configured parameters and cumulative statistics of the router's attached areas. .1.3.6.1.4.1.1991.1.2.4.2.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaEntry,,not-accessible,snOspfAreaId,current,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas. .1.3.6.1.4.1.1991.1.2.4.2.1.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. -.1.3.6.1.4.1.1991.1.2.4.2.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfImportASExtern,Integer32,read-write,,current,,The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type DEFVAL { 1 } -.1.3.6.1.4.1.1991.1.2.4.2.1.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfStubMetric,INTEGER,read-write,,current,,The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. +.1.3.6.1.4.1.1991.1.2.4.2.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfImportASExtern,Integer32,read-write,,current,,The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type DEFVAL { 1 } +.1.3.6.1.4.1.1991.1.2.4.2.1.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfStubMetric,INTEGER,read-write,,current,,The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. .1.3.6.1.4.1.1991.1.2.4.2.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.4.2.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaIdFormat,INTEGER,read-write,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.2.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaIdFormat,INTEGER,read-write,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAddrRange,,,,,, .1.3.6.1.4.1.1991.1.2.4.3.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeTable,,not-accessible,,current,,A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 .1.3.6.1.4.1.1991.1.2.4.3.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeEntry,,not-accessible,snOspfAreaRangeAreaID:snOspfAreaRangeNet,current,,A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 @@ -5937,7 +6454,7 @@ .1.3.6.1.4.1.1991.1.2.4.3.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeNet,IpAddress,read-only,,current,,The IP Address of the Net or Subnet indicated by the range. .1.3.6.1.4.1.1991.1.2.4.3.1.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeMask,IpAddress,read-write,,current,,The Subnet Mask that pertains to the Net or Subnet. .1.3.6.1.4.1.1991.1.2.4.3.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.4.3.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.3.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaRangeAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIntf,,,,,, .1.3.6.1.4.1.1991.1.2.4.4.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfTable,,not-accessible,,deprecated,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. .1.3.6.1.4.1.1991.1.2.4.4.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfEntry,,not-accessible,snOspfIfPort,deprecated,,The OSPF Interface Entry describes one interface from the viewpoint of OSPF. @@ -5953,10 +6470,10 @@ .1.3.6.1.4.1.1991.1.2.4.4.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfAuthKey,OCTET,read-write,,deprecated,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfAuthKey always returns an Octet String of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.4.1.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMetricValue,INTEGER,read-write,,deprecated,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. .1.3.6.1.4.1.1991.1.2.4.4.1.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.4.4.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKeyId,INTEGER,read-write,,deprecated,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). -.1.3.6.1.4.1.1991.1.2.4.4.1.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKey,OCTET,read-write,,deprecated,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. +.1.3.6.1.4.1.1991.1.2.4.4.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKeyId,INTEGER,read-write,,deprecated,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). +.1.3.6.1.4.1.1991.1.2.4.4.1.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKey,OCTET,read-write,,deprecated,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. .1.3.6.1.4.1.1991.1.2.4.4.1.1.15,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMd5ActivationWaitTime,INTEGER,read-write,,deprecated,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). -.1.3.6.1.4.1.1991.1.2.4.4.1.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfAreaIdFormat,INTEGER,read-only,,deprecated,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.4.1.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfAreaIdFormat,INTEGER,read-only,,deprecated,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.4.1.1.17,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfPassiveMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control the passive mode of this interface. .1.3.6.1.4.1.1991.1.2.4.4.1.1.18,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfDatabaseFilterAllOut,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control the filtering of outgoing OSPF LSA on this interface. .1.3.6.1.4.1.1991.1.2.4.4.1.1.19,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfMtuIgnore,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control MTU detection mode of this interface. @@ -5975,10 +6492,10 @@ .1.3.6.1.4.1.1991.1.2.4.4.2.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2AuthKey,OCTET,read-write,,current,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIf2AuthKey always returns an Octet String of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.4.2.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2MetricValue,INTEGER,read-write,,current,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. .1.3.6.1.4.1.1991.1.2.4.4.2.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2RowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.4.4.2.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKeyId,INTEGER,read-write,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). -.1.3.6.1.4.1.1991.1.2.4.4.2.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKey,OCTET,read-write,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero. +.1.3.6.1.4.1.1991.1.2.4.4.2.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKeyId,INTEGER,read-write,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). +.1.3.6.1.4.1.1991.1.2.4.4.2.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKey,OCTET,read-write,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero. .1.3.6.1.4.1.1991.1.2.4.4.2.1.15,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2Md5ActivationWaitTime,INTEGER,read-write,,current,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). -.1.3.6.1.4.1.1991.1.2.4.4.2.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2AreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.4.2.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2AreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.4.2.1.17,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2PassiveMode,INTEGER,read-write,,current,disabled(0):enabled(1),This object control the passive mode of this interface. .1.3.6.1.4.1.1991.1.2.4.4.2.1.18,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2DatabaseFilterAllOut,INTEGER,read-write,,current,disabled(0):enabled(1),This object control the filtering of outgoing OSPF LSA on this interface. .1.3.6.1.4.1.1991.1.2.4.4.2.1.19,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIf2MtuIgnore,INTEGER,read-write,,current,disabled(0):enabled(1),This object control MTU detection mode of this interface. @@ -5997,21 +6514,21 @@ .1.3.6.1.4.1.1991.1.2.4.5.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfAuthType,INTEGER,read-write,,current,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.5.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfAuthKey,OCTET,read-write,,current,,If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.5.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.4.5.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKeyId,INTEGER,read-write,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). -.1.3.6.1.4.1.1991.1.2.4.5.1.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKey,OCTET,read-write,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.2.4.5.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKeyId,INTEGER,read-write,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). +.1.3.6.1.4.1.1991.1.2.4.5.1.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKey,OCTET,read-write,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.5.1.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5ActivationWaitTime,INTEGER,read-write,,current,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). -.1.3.6.1.4.1.1991.1.2.4.5.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.5.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedis,,,,,, .1.3.6.1.4.1.1991.1.2.4.6.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisTable,,not-accessible,,current,,The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain. -.1.3.6.1.4.1.1991.1.2.4.6.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisEntry,,not-accessible,snOspfRedisIndex,current,,The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisIndex,INTEGER,read-only,,current,,The destination IP address that associates with this particular route. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisIpAddress,IpAddress,read-write,,current,,The destination IP address that associates with this particular route. +.1.3.6.1.4.1.1991.1.2.4.6.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisEntry,,not-accessible,snOspfRedisIndex,current,,The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisIndex,INTEGER,read-only,,current,,The destination IP address that associates with this particular route. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisIpAddress,IpAddress,read-write,,current,,The destination IP address that associates with this particular route. .1.3.6.1.4.1.1991.1.2.4.6.1.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisMask,IpAddress,read-write,,current,,The Subnet Mask that pertains to this route. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisAction,INTEGER,read-write,,current,noImport(0):import(1),The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF Domain as external type 2 route. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisProtocol,INTEGER,read-write,,current,rip(1):all(2):static(3):bgp(4):connected(5):isis(6),The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis(6): - the ISIS route. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisSetOspfMetric,INTEGER,read-write,,current,disabled(0):enabled(1),The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metric matches the OSPF metric field. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisAction,INTEGER,read-write,,current,noImport(0):import(1),The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF Domain as external type 2 route. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisProtocol,INTEGER,read-write,,current,rip(1):all(2):static(3):bgp(4):connected(5):isis(6),The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis(6): - the ISIS route. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisSetOspfMetric,INTEGER,read-write,,current,disabled(0):enabled(1),The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metric matches the OSPF metric field. .1.3.6.1.4.1.1991.1.2.4.6.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisOspfMetricValue,INTEGER,read-write,,current,,The metric of using OSPF Metric value on this route. -.1.3.6.1.4.1.1991.1.2.4.6.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisMatchRipMetric,INTEGER,read-write,,current,disabled(0):enabled(1),The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric matches the RIP metric field. +.1.3.6.1.4.1.1991.1.2.4.6.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisMatchRipMetric,INTEGER,read-write,,current,disabled(0):enabled(1),The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric matches the RIP metric field. .1.3.6.1.4.1.1991.1.2.4.6.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisRipMetricValue,INTEGER,read-write,,current,,The metric of using RIP Metric value (1 to 15 hops) on this route. .1.3.6.1.4.1.1991.1.2.4.6.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRedisRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.4.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfNbr,,,,,, @@ -6038,7 +6555,7 @@ .1.3.6.1.4.1.1991.1.2.4.8.1.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the Virtual Neighbor Relationship. .1.3.6.1.4.1.1991.1.2.4.8.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtNbrEvents,Counter32,read-only,,current,,The number of times this virtual link has changed its state, or an error has occurred. .1.3.6.1.4.1.1991.1.2.4.8.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtNbrLSRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue. -.1.3.6.1.4.1.1991.1.2.4.8.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtNbrAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.8.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtNbrAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdb,,,,,, .1.3.6.1.4.1.1991.1.2.4.9.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbTable,,not-accessible,,current,,The OSPF Process's Links State Database. .1.3.6.1.4.1.1991.1.2.4.9.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbEntry,,not-accessible,snOspfLsdbEntryIndex,current,,A single Link State Advertisement. @@ -6051,7 +6568,7 @@ .1.3.6.1.4.1.1991.1.2.4.9.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds. .1.3.6.1.4.1.1991.1.2.4.9.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. .1.3.6.1.4.1.1991.1.2.4.9.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including its header. -.1.3.6.1.4.1.1991.1.2.4.9.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.9.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfLsdbAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExtLsdb,,,,,, .1.3.6.1.4.1.1991.1.2.4.10.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExtLsdbTable,,not-accessible,,current,,The OSPF Process's Links State Database. .1.3.6.1.4.1.1991.1.2.4.10.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfExtLsdbEntry,,not-accessible,snOspfExtLsdbEntryIndex,current,,A single Link State Advertisement. @@ -6069,13 +6586,13 @@ .1.3.6.1.4.1.1991.1.2.4.11.1.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusEntryIndex,Integer32,read-only,,current,,The table entry index of this Area. .1.3.6.1.4.1.1991.1.2.4.11.1.1.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. .1.3.6.1.4.1.1991.1.2.4.11.1.1.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusImportASExtern,Integer32,read-only,,current,,The area's support for importing AS external link- state advertisements. DEFVAL { 1 } -.1.3.6.1.4.1.1991.1.2.4.11.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusStubMetric,INTEGER,read-only,,current,,The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. +.1.3.6.1.4.1.1991.1.2.4.11.1.1.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusStubMetric,INTEGER,read-only,,current,,The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME. .1.3.6.1.4.1.1991.1.2.4.11.1.1.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusSpfRuns,Counter32,read-only,,current,,The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. .1.3.6.1.4.1.1991.1.2.4.11.1.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaBdrRtrCount,Gauge32,read-only,,current,,The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.11.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusASBdrRtrCount,Gauge32,read-only,,current,,The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.11.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusLSACount,Gauge32,read-only,,current,,The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.11.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusLSACksumSum,Integer32,read-only,,current,,The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. DEFVAL { 0 } -.1.3.6.1.4.1.1991.1.2.4.11.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.11.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatus,,,,,, .1.3.6.1.4.1.1991.1.2.4.12.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusTable,,not-accessible,,current,,The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF. .1.3.6.1.4.1.1991.1.2.4.12.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusEntry,,not-accessible,snOspfIfStatusEntryIndex,current,,The OSPF Interface Entry describes one interface from the viewpoint of OSPF. @@ -6097,10 +6614,10 @@ .1.3.6.1.4.1.1991.1.2.4.12.1.1.16,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusAuthType,Integer32,read-only,,current,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.12.1.1.17,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusAuthKey,OCTET,read-only,,current,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfStatusAuthKey always returns an Octet String of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.12.1.1.18,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMetricValue,INTEGER,read-only,,current,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. -.1.3.6.1.4.1.1991.1.2.4.12.1.1.19,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKeyId,INTEGER,read-only,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). -.1.3.6.1.4.1.1991.1.2.4.12.1.1.20,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKey,OCTET,read-only,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. +.1.3.6.1.4.1.1991.1.2.4.12.1.1.19,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKeyId,INTEGER,read-only,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). +.1.3.6.1.4.1.1991.1.2.4.12.1.1.20,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKey,OCTET,read-only,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. .1.3.6.1.4.1.1991.1.2.4.12.1.1.21,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5ActivationWaitTime,INTEGER,read-only,,current,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). -.1.3.6.1.4.1.1991.1.2.4.12.1.1.22,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.12.1.1.22,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfIfStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatus,,,,,, .1.3.6.1.4.1.1991.1.2.4.13.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusTable,,not-accessible,,current,,Information about this router's virtual interfaces. .1.3.6.1.4.1.1991.1.2.4.13.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEntry,,not-accessible,snOspfVirtIfStatusEntryIndex,current,,Information about a single Virtual Interface. @@ -6112,13 +6629,13 @@ .1.3.6.1.4.1.1991.1.2.4.13.1.1.6,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusHelloInterval,INTEGER,read-only,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. DEFVAL { 10 } .1.3.6.1.4.1.1991.1.2.4.13.1.1.7,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusRtrDeadInterval,INTEGER,read-only,,current,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. DEFVAL { 60 } .1.3.6.1.4.1.1991.1.2.4.13.1.1.8,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusState,INTEGER,read-only,,current,down(1):pointToPoint(4),The OSPF virtual interfaces states. DEFVAL { down } -.1.3.6.1.4.1.1991.1.2.4.13.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEvents,Counter32,read-only,,current,,The number of state changes or error events on this Virtual Link. +.1.3.6.1.4.1.1991.1.2.4.13.1.1.9,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEvents,Counter32,read-only,,current,,The number of state changes or error events on this Virtual Link. .1.3.6.1.4.1.1991.1.2.4.13.1.1.10,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAuthType,Integer32,read-only,,current,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.13.1.1.11,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAuthKey,OCTET,read-only,,current,,If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. DEFVAL { 0 } -.1.3.6.1.4.1.1991.1.2.4.13.1.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKeyId,INTEGER,read-only,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). -.1.3.6.1.4.1.1991.1.2.4.13.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKey,OCTET,read-only,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.2.4.13.1.1.12,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKeyId,INTEGER,read-only,,current,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet). +.1.3.6.1.4.1.1991.1.2.4.13.1.1.13,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKey,OCTET,read-only,,current,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero. DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.4.13.1.1.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5ActivationWaitTime,INTEGER,read-only,,current,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). -.1.3.6.1.4.1.1991.1.2.4.13.1.1.15,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. +.1.3.6.1.4.1.1991.1.2.4.13.1.1.15,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAreaIdFormat,INTEGER,read-only,,current,integer(0):ipAddress(1),This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. .1.3.6.1.4.1.1991.1.2.4.14,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRoutingInfo,,,,,, .1.3.6.1.4.1.1991.1.2.4.14.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRoutingInfoTable,,not-accessible,,current,,Information about this router's routing information. .1.3.6.1.4.1.1991.1.2.4.14.1.1,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfRoutingInfoEntry,,not-accessible,snOspfRoutingInfoIndex,current,,Information about a single ABR/ASBR Routing entry. @@ -6132,7 +6649,7 @@ .1.3.6.1.4.1.1991.1.2.4.15.2,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfConfigErrorType,INTEGER,read-only,,current,unUsed(0):badVersion(1):areaMismatch(2):unknownNbmaNbr(3):unknownVirtualNbr(4):authTypeMismatch(5):authFailure(6):netMaskMismatch(7):helloIntervalMismatch(8):deadIntervalMismatch(9):optionMismatch(10),Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps. .1.3.6.1.4.1.1991.1.2.4.15.3,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfPacketType,INTEGER,read-only,,current,unUsed(0):hello(1):dbDescript(2):lsReq(3):lsUpdate(4):lsAck(5),OSPF packet types. .1.3.6.1.4.1.1991.1.2.4.15.4,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfPacketSrc,IpAddress,read-only,,current,,The IP address of an inbound packet that can- not be identified by a neighbor instance. -.1.3.6.1.4.1.1991.1.2.4.15.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfTrapsGenerationMode,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps. +.1.3.6.1.4.1.1991.1.2.4.15.5,FOUNDRY-SN-OSPF-GROUP-MIB::snOspfTrapsGenerationMode,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps. .1.3.6.1.4.1.1991.1.2.5,FOUNDRY-SN-ROOT-MIB::snDvmrp,,,,,, .1.3.6.1.4.1.1991.1.2.5.1,FOUNDRY-SN-IP-MIB::snDvmrpMIBObjects,,,,,, .1.3.6.1.4.1.1991.1.2.5.1.1,FOUNDRY-SN-IP-MIB::snDvmrpVersion,OCTET,read-only,,current,,The router's DVMRP version information. @@ -6145,7 +6662,7 @@ .1.3.6.1.4.1.1991.1.2.5.1.8,FOUNDRY-SN-IP-MIB::snDvmrpRouteExpireTime,INTEGER,read-write,,current,,This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. DEFVAL { 200 } .1.3.6.1.4.1.1991.1.2.5.1.9,FOUNDRY-SN-IP-MIB::snDvmrpRouteDiscardTime,INTEGER,read-write,,current,,This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. DEFVAL { 340 } .1.3.6.1.4.1.1991.1.2.5.1.10,FOUNDRY-SN-IP-MIB::snDvmrpPruneAge,INTEGER,read-write,,current,,This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. DEFVAL { 180 } -.1.3.6.1.4.1.1991.1.2.5.1.11,FOUNDRY-SN-IP-MIB::snDvmrpGraftRetransmitTime,INTEGER,read-write,,current,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. For FastIron platforms, the default value is 3 and the range is between 2 to 10. For NetIron platforms, the range is between 5 to 3600. DEFVAL { 10 } +.1.3.6.1.4.1.1991.1.2.5.1.11,FOUNDRY-SN-IP-MIB::snDvmrpGraftRetransmitTime,INTEGER,read-write,,current,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. For FastIron platforms, the default value is 3 and the range is between 2 to 10. DEFVAL { 10 } .1.3.6.1.4.1.1991.1.2.5.1.12,FOUNDRY-SN-IP-MIB::snDvmrpDefaultRoute,IpAddress,read-write,,current,,This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen. .1.3.6.1.4.1.1991.1.2.5.1.13,FOUNDRY-SN-IP-MIB::snDvmrpVInterfaceTable,,not-accessible,,current,,The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen. .1.3.6.1.4.1.1991.1.2.5.1.13.1,FOUNDRY-SN-IP-MIB::snDvmrpVInterfaceEntry,,not-accessible,snDvmrpVInterfaceVifIndex,current,,An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. @@ -6226,23 +6743,23 @@ .1.3.6.1.4.1.1991.1.2.6.1.4.1.4,FOUNDRY-SN-IGMP-MIB::snIgmpStaticGroupRowStatus,INTEGER,read-write,,current,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a static group entry. .1.3.6.1.4.1.1991.1.2.7,FOUNDRY-SN-ROOT-MIB::snFsrp,,,,,, .1.3.6.1.4.1.1991.1.2.7.1,FOUNDRY-SN-IP-MIB::snFsrpGlobal,,,,,, -.1.3.6.1.4.1.1991.1.2.7.1.1,FOUNDRY-SN-IP-MIB::snFsrpGroupOperMode,INTEGER,read-write,,current,disabled(0):enabled(1),The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activate FSRP +.1.3.6.1.4.1.1991.1.2.7.1.1,FOUNDRY-SN-IP-MIB::snFsrpGroupOperMode,INTEGER,read-write,,current,disabled(0):enabled(1),The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activate FSRP .1.3.6.1.4.1.1991.1.2.7.1.2,FOUNDRY-SN-IP-MIB::snFsrpIfStateChangeTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.2.7.2,FOUNDRY-SN-IP-MIB::snFsrpIntf,,,,,, .1.3.6.1.4.1.1991.1.2.7.2.1,FOUNDRY-SN-IP-MIB::snFsrpIfTable,,not-accessible,,current,,The FSRP Interface Table describes the interfaces from the viewpoint of FSRP. .1.3.6.1.4.1.1991.1.2.7.2.1.1,FOUNDRY-SN-IP-MIB::snFsrpIfEntry,,not-accessible,snFsrpIfPort:snFsrpIfIpAddress,current,,The FSRP Interface Entry describes one interface from the viewpoint of FSRP. .1.3.6.1.4.1.1991.1.2.7.2.1.1.1,FOUNDRY-SN-IP-MIB::snFsrpIfPort,Integer32,read-only,,current,,The physical router port of this FSRP interface. .1.3.6.1.4.1.1991.1.2.7.2.1.1.2,FOUNDRY-SN-IP-MIB::snFsrpIfIpAddress,IpAddress,read-only,,current,,The IP Address of the physical router port of this interface. -.1.3.6.1.4.1.1991.1.2.7.2.1.1.3,FOUNDRY-SN-IP-MIB::snFsrpIfVirRtrIpAddr,IpAddress,read-write,,current,,The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet. +.1.3.6.1.4.1.1991.1.2.7.2.1.1.3,FOUNDRY-SN-IP-MIB::snFsrpIfVirRtrIpAddr,IpAddress,read-write,,current,,The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet. .1.3.6.1.4.1.1991.1.2.7.2.1.1.4,FOUNDRY-SN-IP-MIB::snFsrpIfOtherRtrIpAddr,IpAddress,read-write,,current,,The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be configured for FSRP to work correctly .1.3.6.1.4.1.1991.1.2.7.2.1.1.5,FOUNDRY-SN-IP-MIB::snFsrpIfPreferLevel,INTEGER,read-write,,current,,The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher priority selected to becomes the Active Router. DEFVAL { 100 } -.1.3.6.1.4.1.1991.1.2.7.2.1.1.6,FOUNDRY-SN-IP-MIB::snFsrpIfTrackPortMask,Integer32,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product) DEFVAL { 0 } +.1.3.6.1.4.1.1991.1.2.7.2.1.1.6,FOUNDRY-SN-IP-MIB::snFsrpIfTrackPortMask,Integer32,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product) DEFVAL { 0 } .1.3.6.1.4.1.1991.1.2.7.2.1.1.7,FOUNDRY-SN-IP-MIB::snFsrpIfRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.7.2.1.1.8,FOUNDRY-SN-IP-MIB::snFsrpIfState,INTEGER,read-only,,current,init(0):negotiating(1):standby(2):active(3),This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. active(3)...active state. .1.3.6.1.4.1.1991.1.2.7.2.1.1.9,FOUNDRY-SN-IP-MIB::snFsrpIfKeepAliveTime,INTEGER,read-write,,current,,The heart-beat is from 1 to 120 seconds. DEFVAL { 3 } .1.3.6.1.4.1.1991.1.2.7.2.1.1.10,FOUNDRY-SN-IP-MIB::snFsrpIfRouterDeadTime,INTEGER,read-write,,current,,The hold time of the Fsrp router is from 3 to 255 seconds. DEFVAL { 9 } -.1.3.6.1.4.1.1991.1.2.7.2.1.1.11,FOUNDRY-SN-IP-MIB::snFsrpIfChassisTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership. (It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList) -.1.3.6.1.4.1.1991.1.2.7.2.1.1.12,FOUNDRY-SN-IP-MIB::snFsrpIfTrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router FSRP physical track port membership. +.1.3.6.1.4.1.1991.1.2.7.2.1.1.11,FOUNDRY-SN-IP-MIB::snFsrpIfChassisTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership. (It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList) +.1.3.6.1.4.1.1991.1.2.7.2.1.1.12,FOUNDRY-SN-IP-MIB::snFsrpIfTrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router FSRP physical track port membership. .1.3.6.1.4.1.1991.1.2.8,FOUNDRY-SN-ROOT-MIB::snGblRt,,,,,, .1.3.6.1.4.1.1991.1.2.8.1,FOUNDRY-SN-IP-MIB::snGblRtGeneral,,,,,, .1.3.6.1.4.1.1991.1.2.8.1.1,FOUNDRY-SN-IP-MIB::snGblRtRouteOnly,INTEGER,read-write,,current,disabled(0):enabled(1),If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If route cannot perform, it will switch packets. @@ -6252,8 +6769,8 @@ .1.3.6.1.4.1.1991.1.2.9.1.2,FOUNDRY-SN-IP-MIB::snPimNeighborRouterTimeout,INTEGER,read-write,,current,,This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. DEFVAL { 180 } .1.3.6.1.4.1.1991.1.2.9.1.3,FOUNDRY-SN-IP-MIB::snPimHelloTime,INTEGER,read-write,,current,,This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbouring router. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. DEFVAL { 60 } .1.3.6.1.4.1.1991.1.2.9.1.4,FOUNDRY-SN-IP-MIB::snPimPruneTime,INTEGER,read-write,,current,,This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. For FastIron platforms, the default value is 180. DEFVAL { 60 } -.1.3.6.1.4.1.1991.1.2.9.1.5,FOUNDRY-SN-IP-MIB::snPimGraftRetransmitTime,INTEGER,read-write,,current,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. DEFVAL { 180 } -.1.3.6.1.4.1.1991.1.2.9.1.6,FOUNDRY-SN-IP-MIB::snPimInactivityTime,INTEGER,read-write,,current,,This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. For FastIron platforms, the default value is 3 and the range is between 2 to 10. For NetIron platforms, the range is between 10 to 3600. DEFVAL { 180 } +.1.3.6.1.4.1.1991.1.2.9.1.5,FOUNDRY-SN-IP-MIB::snPimGraftRetransmitTime,INTEGER,read-write,,current,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. For FastIron platforms, the default value is 3 and the range is between 2 to 10. DEFVAL { 180 } +.1.3.6.1.4.1.1991.1.2.9.1.6,FOUNDRY-SN-IP-MIB::snPimInactivityTime,INTEGER,read-write,,current,,This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. DEFVAL { 180 } .1.3.6.1.4.1.1991.1.2.9.1.7,FOUNDRY-SN-IP-MIB::snPimVInterfaceTable,,not-accessible,,current,,The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen. .1.3.6.1.4.1.1991.1.2.9.1.7.1,FOUNDRY-SN-IP-MIB::snPimVInterfaceEntry,,not-accessible,snPimVInterfaceVifIndex,current,,An entry (conceptual row) in the snPimVInterfaceTable. .1.3.6.1.4.1.1991.1.2.9.1.7.1.1,FOUNDRY-SN-IP-MIB::snPimVInterfaceVifIndex,INTEGER,read-only,,current,,The ifIndex value of this PIM virtual interface. @@ -6294,10 +6811,10 @@ .1.3.6.1.4.1.1991.1.2.9.1.9.1.18,FOUNDRY-SN-IP-MIB::snPimVIfStatOutGraftAckPkts,Counter32,read-only,,current,,The number of graft acknowledge packets that have been sent on the PIM virtual interface. .1.3.6.1.4.1.1991.1.2.9.1.9.1.19,FOUNDRY-SN-IP-MIB::snPimVIfStatDiscardGraftAckPkts,Counter32,read-only,,current,,The number of graft acknowledge packets that have been discarded by the PIM virtual interface. .1.3.6.1.4.1.1991.1.2.9.2,FOUNDRY-SN-IP-MIB::snPimSMMIBObjects,,,,,, -.1.3.6.1.4.1.1991.1.2.9.2.1,FOUNDRY-SN-IP-MIB::snPimJoinPruneInterval,INTEGER,read-write,,current,,The default interval in seconds at which periodic PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen. +.1.3.6.1.4.1.1991.1.2.9.2.1,FOUNDRY-SN-IP-MIB::snPimJoinPruneInterval,INTEGER,read-write,,current,,The default interval in seconds at which periodic PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen. .1.3.6.1.4.1.1991.1.2.9.2.2,FOUNDRY-SN-IP-MIB::snPimCandidateBSRTable,,not-accessible,,current,,Candidate Bootstrap Router information. .1.3.6.1.4.1.1991.1.2.9.2.2.1,FOUNDRY-SN-IP-MIB::snPimCandidateBSREntry,,not-accessible,snPimCandidateBSRPortID,current,,An entry (conceptual row) in the snPimCandidateBSRTable. -.1.3.6.1.4.1.1991.1.2.9.2.2.1.1,FOUNDRY-SN-IP-MIB::snPimCandidateBSRPortID,Integer32,read-write,,current,,The IP address of the PIM interface. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. +.1.3.6.1.4.1.1991.1.2.9.2.2.1.1,FOUNDRY-SN-IP-MIB::snPimCandidateBSRPortID,Integer32,read-write,,current,,The IP address of the PIM interface. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. .1.3.6.1.4.1.1991.1.2.9.2.2.1.2,FOUNDRY-SN-IP-MIB::snPimCandidateBSRIPAddress,IpAddress,read-only,,current,,The (unicast) address of the Candidate BSR. .1.3.6.1.4.1.1991.1.2.9.2.2.1.3,FOUNDRY-SN-IP-MIB::snPimCandidateBSRHashMaskLen,INTEGER,read-write,,current,,The hash mask value for this router as a candidate bootstrap router. .1.3.6.1.4.1.1991.1.2.9.2.2.1.4,FOUNDRY-SN-IP-MIB::snPimCandidateBSRPreference,INTEGER,read-write,,current,,The preference value for this router as a candidate bootstrap router. DEFVAL { 100 } @@ -6306,13 +6823,13 @@ .1.3.6.1.4.1.1991.1.2.9.2.3.1.1,FOUNDRY-SN-IP-MIB::snPimRPSetGroupAddress,IpAddress,read-only,,current,,The IP multicast group address which, when combined with snPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP. .1.3.6.1.4.1.1991.1.2.9.2.3.1.2,FOUNDRY-SN-IP-MIB::snPimRPSetMask,IpAddress,read-only,,current,,The multicast group address mask which, when combined with snPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP. .1.3.6.1.4.1.1991.1.2.9.2.3.1.3,FOUNDRY-SN-IP-MIB::snPimRPSetIPAddress,IpAddress,read-only,,current,,The IP address of the Candidate-RP. -.1.3.6.1.4.1.1991.1.2.9.2.3.1.4,FOUNDRY-SN-IP-MIB::snPimRPSetHoldTime,INTEGER,read-only,,current,,The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0. +.1.3.6.1.4.1.1991.1.2.9.2.3.1.4,FOUNDRY-SN-IP-MIB::snPimRPSetHoldTime,INTEGER,read-only,,current,,The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0. .1.3.6.1.4.1.1991.1.2.9.2.4,FOUNDRY-SN-IP-MIB::snPimCandidateRPTable,,not-accessible,,current,,The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups snPimEnable must be 'enabled' before this table is read or writen. .1.3.6.1.4.1.1991.1.2.9.2.4.1,FOUNDRY-SN-IP-MIB::snPimCandidateRPEntry,,not-accessible,snPimCandidateRPGroupAddress:snPimCandidateRPMask,current,,An entry (conceptual row) in the snPimCandidateRPTable. .1.3.6.1.4.1.1991.1.2.9.2.4.1.1,FOUNDRY-SN-IP-MIB::snPimCandidateRPGroupAddress,IpAddress,read-only,,current,,The IP multicast group address which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. .1.3.6.1.4.1.1991.1.2.9.2.4.1.2,FOUNDRY-SN-IP-MIB::snPimCandidateRPMask,IpAddress,read-only,,current,,The multicast group address mask which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. .1.3.6.1.4.1.1991.1.2.9.2.4.1.3,FOUNDRY-SN-IP-MIB::snPimCandidateRPIPAddress,IpAddress,read-write,,current,,The (unicast) address of the interface which will be advertised as a Candidate-RP. -.1.3.6.1.4.1.1991.1.2.9.2.4.1.4,FOUNDRY-SN-IP-MIB::snPimCandidateRPRowStatus,INTEGER,read-write,,current,noSuch(0):other(1):valid(2):delete(3):create(4):modify(5),The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid +.1.3.6.1.4.1.1991.1.2.9.2.4.1.4,FOUNDRY-SN-IP-MIB::snPimCandidateRPRowStatus,INTEGER,read-write,,current,noSuch(0):other(1):valid(2):delete(3):create(4):modify(5),The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.10,FOUNDRY-SN-ROOT-MIB::snAppleTalk,,,,,, .1.3.6.1.4.1.1991.1.2.10.1,FOUNDRY-SN-APPLETALK-MIB::snRtATGeneral,,,,,, .1.3.6.1.4.1.1991.1.2.10.1.1,FOUNDRY-SN-APPLETALK-MIB::snRtATRoutingEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable AppleTalk routing function on this box. @@ -6382,11 +6899,11 @@ .1.3.6.1.4.1.1991.1.2.10.7.1.1,FOUNDRY-SN-APPLETALK-MIB::snRtATAddZoneFilterPortIndex,Integer32,read-only,,current,,The port index for additional zone filter table entry. .1.3.6.1.4.1.1991.1.2.10.7.1.2,FOUNDRY-SN-APPLETALK-MIB::snRtATAddZoneFilterAction,INTEGER,read-write,,current,deny(0):permit(1),Action to take if no zone filter match. .1.3.6.1.4.1.1991.1.2.10.7.1.3,FOUNDRY-SN-APPLETALK-MIB::snRtATAddZoneFilterRtmpEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enable/disable RTMP filtering on additional zone. -.1.3.6.1.4.1.1991.1.2.11,FOUNDRY-SN-ROOT-MIB::snBgp4,,,,,, +.1.3.6.1.4.1.1991.1.2.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.2.11.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4Gen,,,,,, -.1.3.6.1.4.1.1991.1.2.11.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenAlwaysCompareMed,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. +.1.3.6.1.4.1.1991.1.2.11.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenAlwaysCompareMed,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. .1.3.6.1.4.1.1991.1.2.11.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenAutoSummary,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. -.1.3.6.1.4.1.1991.1.2.11.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDefaultLocalPreference,Integer32,read-write,,current,,To set the default local preference attribute. +.1.3.6.1.4.1.1991.1.2.11.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDefaultLocalPreference,Integer32,read-write,,deprecated,,To set the default local preference attribute.This is deprecated and snBgp4GenDefaultLocalPreference1 is introduced. .1.3.6.1.4.1.1991.1.2.11.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDefaultInfoOriginate,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the default Information Originate. .1.3.6.1.4.1.1991.1.2.11.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenFastExternalFallover,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. .1.3.6.1.4.1.1991.1.2.11.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenNextBootNeighbors,Integer32,read-write,,current,,The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors. @@ -6397,7 +6914,7 @@ .1.3.6.1.4.1.1991.1.2.11.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenRouterId,IpAddress,read-write,,current,,BGP Router Id. .1.3.6.1.4.1.1991.1.2.11.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenTableMap,OCTET,read-write,,current,,An octet string of the route-map name, each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.1.13,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenAdminStat,INTEGER,read-write,,current,disabled(0):enabled(1),The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router. -.1.3.6.1.4.1.1991.1.2.11.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDefaultMetric,Integer32,read-write,,current,,To set default metric values for the BGP4 protocol. +.1.3.6.1.4.1.1991.1.2.11.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDefaultMetric,Integer32,read-write,,deprecated,,To set default metric values for the BGP4 protocol.This is deprecated and snBgp4GenDefaultMetric1 is introduced. .1.3.6.1.4.1.1991.1.2.11.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenMaxNeighbors,Integer32,read-only,,current,,The maximum number of neighbors can be configured in a BGP Peer Group. .1.3.6.1.4.1.1991.1.2.11.1.16,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenMinNeighbors,Integer32,read-only,,current,,The minimum number of neighbors can be configured in a BGP Peer Group. .1.3.6.1.4.1.1991.1.2.11.1.17,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenMaxRoutes,Integer32,read-only,,current,,The maximum configured number of Routes. @@ -6419,13 +6936,13 @@ .1.3.6.1.4.1.1991.1.2.11.1.33,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4LocalDistance,INTEGER,read-write,,current,,Administrative distance for BGP local routes. DEFVAL { 200 } .1.3.6.1.4.1.1991.1.2.11.1.34,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4OperNumOfAttributes,Integer32,read-only,,current,,The operational number of attribute entries. .1.3.6.1.4.1.1991.1.2.11.1.35,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NextBootMaxAttributes,INTEGER,read-write,,current,,The next boot maximum attribute entries. 10000 means reset to default. DEFVAL { 10000 } -.1.3.6.1.4.1.1991.1.2.11.1.36,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClusterId,Integer32,read-write,,current,,A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. +.1.3.6.1.4.1.1991.1.2.11.1.36,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClusterId,Integer32,read-write,,current,,A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. .1.3.6.1.4.1.1991.1.2.11.1.37,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClientToClientReflection,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the client to client reflection in BGP4. .1.3.6.1.4.1.1991.1.2.11.1.38,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenTotalNeighbors,Integer32,read-only,,current,,The current total number of neighbors running in a BGP Group. .1.3.6.1.4.1.1991.1.2.11.1.39,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenMaxPaths,INTEGER,read-write,,current,,The maximum configured number of Paths. .1.3.6.1.4.1.1991.1.2.11.1.40,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenConfedId,INTEGER,read-write,,current,,Bgp4 Confederation Id. -.1.3.6.1.4.1.1991.1.2.11.1.41,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenConfedPeers,OCTET,read-write,,current,,An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.1.42,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDampening,INTEGER,read-write,,current,none(0):parameters(1):routeMap(2),The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable. +.1.3.6.1.4.1.1991.1.2.11.1.41,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenConfedPeers,OCTET,read-write,,current,,An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.1.42,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDampening,INTEGER,read-write,,current,none(0):parameters(1):routeMap(2),The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable. .1.3.6.1.4.1.1991.1.2.11.1.43,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDampenHalfLife,INTEGER,read-write,,current,,Bgp4 Dampening Half Life. .1.3.6.1.4.1.1991.1.2.11.1.44,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDampenReuse,INTEGER,read-write,,current,,Bgp4 Dampening Reuse. .1.3.6.1.4.1.1991.1.2.11.1.45,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4GenDampenSuppress,INTEGER,read-write,,current,,Bgp4 Dampening Suppress. @@ -6449,8 +6966,8 @@ .1.3.6.1.4.1.1991.1.2.11.3.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrEntry,,not-accessible,snBgp4AggregateAddrIp:snBgp4AggregateAddrMask:snBgp4AggregateAddrOption,current,,An entry in the Bgp4 Aggregate Address table. .1.3.6.1.4.1.1991.1.2.11.3.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrIp,IpAddress,read-only,,current,,Aggregate Address IP address. .1.3.6.1.4.1.1991.1.2.11.3.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrMask,IpAddress,read-only,,current,,Aggregate Address IP subnet mask. -.1.3.6.1.4.1.1991.1.2.11.3.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrOption,INTEGER,read-only,,current,address(1):asSet(2):summaryOnly(3):suppressMap(4):advertiseMap(5):attributeMap(6),address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. -.1.3.6.1.4.1.1991.1.2.11.3.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrMap,OCTET,read-write,,current,,This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet. +.1.3.6.1.4.1.1991.1.2.11.3.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrOption,INTEGER,read-only,,current,address(1):asSet(2):summaryOnly(3):suppressMap(4):advertiseMap(5):attributeMap(6),address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. +.1.3.6.1.4.1.1991.1.2.11.3.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrMap,OCTET,read-write,,current,,This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.3.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.11.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AsPathFilter,,,,,, .1.3.6.1.4.1.1991.1.2.11.4.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterTable,,not-accessible,,current,,Bgp4 AS-Path Filter table. @@ -6464,17 +6981,17 @@ .1.3.6.1.4.1.1991.1.2.11.5.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterEntry,,not-accessible,snBgp4CommunityFilterIndex,current,,An entry in the Bgp4 Community Filter table. .1.3.6.1.4.1.1991.1.2.11.5.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterIndex,Integer32,read-only,,current,,The table index for a filter entry. .1.3.6.1.4.1.1991.1.2.11.5.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterAction,INTEGER,read-write,,current,deny(0):permit(1),Action to take if the bgp address match with this filter. -.1.3.6.1.4.1.1991.1.2.11.5.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.5.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterCommNum,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. .1.3.6.1.4.1.1991.1.2.11.5.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterInternet,INTEGER,read-write,,current,disabled(0):enabled(1),Disabled/Enabled the Internet Community. .1.3.6.1.4.1.1991.1.2.11.5.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterNoAdvertise,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to any peer (internal or external). .1.3.6.1.4.1.1991.1.2.11.5.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterNoExport,INTEGER,read-write,,current,false(0):true(1),Do not advertise this route to an EBGP peer. .1.3.6.1.4.1.1991.1.2.11.5.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.11.5.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. +.1.3.6.1.4.1.1991.1.2.11.5.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterLocalAs,INTEGER,read-write,,current,false(0):true(1),Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. .1.3.6.1.4.1.1991.1.2.11.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfg,,,,,, .1.3.6.1.4.1.1991.1.2.11.6.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgTable,,not-accessible,,current,,Bgp4 Neighbor General Configuration table. .1.3.6.1.4.1.1991.1.2.11.6.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEntry,,not-accessible,snBgp4NeighGenCfgNeighIp,current,,An entry in the Bgp4 Community Filter table. .1.3.6.1.4.1.1991.1.2.11.6.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgNeighIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. -.1.3.6.1.4.1.1991.1.2.11.6.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgAdvertlevel,INTEGER,read-write,,current,,To set the minimum interval between the sending of BGP routing updates. +.1.3.6.1.4.1.1991.1.2.11.6.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgAdvertlevel,INTEGER,read-write,,current,,To set the minimum interval between the sending of BGP routing updates. .1.3.6.1.4.1.1991.1.2.11.6.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgDefOriginate,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the default originate for this neighbor. .1.3.6.1.4.1.1991.1.2.11.6.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEbgpMultihop,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the EBGP Muitihop for this neighbor. .1.3.6.1.4.1.1991.1.2.11.6.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgMaxPrefix,Integer32,read-write,,current,,To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes. @@ -6482,9 +6999,9 @@ .1.3.6.1.4.1.1991.1.2.11.6.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRemoteAs,INTEGER,read-write,,current,,To specify a neighbor with an autonomous system number(AS). .1.3.6.1.4.1.1991.1.2.11.6.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgSendComm,INTEGER,read-write,,current,disabled(0):enabled(1),To specify that a COMMUNITES attribute should be sent to a BGP neighbor. .1.3.6.1.4.1.1991.1.2.11.6.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgWeight,INTEGER,read-write,,current,,To assign a weight to a neighbor connection. -.1.3.6.1.4.1.1991.1.2.11.6.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgWeightFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.6.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgWeightFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.6.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5):applyDefault(6),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.11.6.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgUpdateSrcLpbIntf,INTEGER,read-write,,current,,To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address. +.1.3.6.1.4.1.1991.1.2.11.6.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgUpdateSrcLpbIntf,INTEGER,read-write,,current,,To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address. .1.3.6.1.4.1.1991.1.2.11.6.1.1.13,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRouteRefClient,INTEGER,read-write,,current,disabled(0):enabled(1),To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector. .1.3.6.1.4.1.1991.1.2.11.6.1.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRemovePrivateAs,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable filtering private AS number. .1.3.6.1.4.1.1991.1.2.11.6.1.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEbgpMultihopTtl,INTEGER,read-write,,current,,The EBGP Muitihop TTL for this neighbor. @@ -6498,33 +7015,33 @@ .1.3.6.1.4.1.1991.1.2.11.7.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupTable,,not-accessible,,current,,Bgp4 Neighbor Distribute Group table. .1.3.6.1.4.1.1991.1.2.11.7.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupEntry,,not-accessible,snBgp4NeighDistGroupNeighIp:snBgp4NeighDistGroupDir,current,,An entry in the Bgp4 Distribute Group table. .1.3.6.1.4.1.1991.1.2.11.7.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupNeighIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. -.1.3.6.1.4.1.1991.1.2.11.7.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. -.1.3.6.1.4.1.1991.1.2.11.7.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.7.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.11.7.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.7.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.7.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInIpAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.7.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutIpAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInIpAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.7.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutIpAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.7.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInPrefixList,OCTET,read-write,,current,,A Prefix name list. .1.3.6.1.4.1.1991.1.2.11.7.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutPrefixList,OCTET,read-write,,current,,A Prefix name list. .1.3.6.1.4.1.1991.1.2.11.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroup,,,,,, .1.3.6.1.4.1.1991.1.2.11.8.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupTable,,not-accessible,,current,,Bgp4 Neighbor Filter Group table. .1.3.6.1.4.1.1991.1.2.11.8.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupEntry,,not-accessible,snBgp4NeighFilterGroupNeighIp:snBgp4NeighFilterGroupDir,current,,An entry in the Bgp4 Neighbor Filter Group table. .1.3.6.1.4.1.1991.1.2.11.8.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupNeighIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.8.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.11.8.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutFilterList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.8.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupWeight,INTEGER,read-write,,current,,To assign a weight to a neighbor filter. -.1.3.6.1.4.1.1991.1.2.11.8.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupWeightAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.8.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupWeightAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMap,,,,,, .1.3.6.1.4.1.1991.1.2.11.9.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapTable,,not-accessible,,current,,Bgp4 Neighbor Route Map table. .1.3.6.1.4.1.1991.1.2.11.9.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapEntry,,not-accessible,snBgp4NeighRouteMapNeighIp:snBgp4NeighRouteMapDir,current,,An entry in the Bgp4 Route Map table. .1.3.6.1.4.1.1991.1.2.11.9.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapNeighIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. -.1.3.6.1.4.1.1991.1.2.11.9.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. +.1.3.6.1.4.1.1991.1.2.11.9.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. .1.3.6.1.4.1.1991.1.2.11.9.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapMapName,OCTET,read-write,,current,,An octet string of the route-map name, Each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.9.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.11.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4Network,,,,,, @@ -6537,8 +7054,8 @@ .1.3.6.1.4.1.1991.1.2.11.10.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NetworkRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.11.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4Redis,,,,,, .1.3.6.1.4.1.1991.1.2.11.11.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisTable,,not-accessible,,current,,The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. -.1.3.6.1.4.1.1991.1.2.11.11.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisEntry,,not-accessible,snBgp4RedisProtocol,current,,The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. -.1.3.6.1.4.1.1991.1.2.11.11.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisProtocol,INTEGER,read-only,,current,rip(1):ospf(2):static(3):connected(4):isis(5),The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS. +.1.3.6.1.4.1.1991.1.2.11.11.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisEntry,,not-accessible,snBgp4RedisProtocol,current,,The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. +.1.3.6.1.4.1.1991.1.2.11.11.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisProtocol,INTEGER,read-only,,current,rip(1):ospf(2):static(3):connected(4):isis(5),The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS. .1.3.6.1.4.1.1991.1.2.11.11.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisMetric,Integer32,read-write,,current,,The metric of using the specified protocol Metric value. .1.3.6.1.4.1.1991.1.2.11.11.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisRouteMap,OCTET,read-write,,current,,An octet string of the route-map name, each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.11.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RedisWeight,INTEGER,read-write,,current,,To assign a weight for the specified protocol. @@ -6558,26 +7075,26 @@ .1.3.6.1.4.1.1991.1.2.11.13.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchEntry,,not-accessible,snBgp4RouteMapMatchMapName:snBgp4RouteMapMatchSequenceNum,current,,An entry in the Bgp4 Route Map Match table. .1.3.6.1.4.1.1991.1.2.11.13.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchMapName,OCTET,read-only,,current,,An octet string of the route-map name, each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.13.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchSequenceNum,Integer32,read-only,,current,,A sequence number for this particular route-map. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressFilter,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. .1.3.6.1.4.1.1991.1.2.11.13.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchMetric,Integer32,read-write,,current,,To match a metric for BGP routes. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRouteType,INTEGER,read-write,,current,none(0):external(1):externalType1(2):externalType2(3):internal(4):local(5),To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRouteType,INTEGER,read-write,,current,none(0):external(1):externalType1(2):externalType2(3):internal(4):local(5),To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. .1.3.6.1.4.1.1991.1.2.11.13.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchTagList,OCTET,read-write,,current,,To match a BGP tag access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRowMask,Integer32,read-write,,current,,This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset -.1.3.6.1.4.1.1991.1.2.11.13.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityList,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.13,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressPrefixList,OCTET,read-write,,current,,Prefix list To match a BGP address access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. -.1.3.6.1.4.1.1991.1.2.11.13.1.1.16,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopPrefixList,OCTET,read-write,,current,,Prefix list To match a BGP address access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRowMask,Integer32,read-write,,current,,This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset +.1.3.6.1.4.1.1991.1.2.11.13.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityList,OCTET,read-write,,current,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.13,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressPrefixList,OCTET,read-write,,current,,Prefix list To match a BGP address access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopAccessList,OCTET,read-write,,current,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. +.1.3.6.1.4.1.1991.1.2.11.13.1.1.16,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopPrefixList,OCTET,read-write,,current,,Prefix list To match a BGP address access list. .1.3.6.1.4.1.1991.1.2.11.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSet,,,,,, .1.3.6.1.4.1.1991.1.2.11.14.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetTable,,not-accessible,,current,,Bgp4 Route Map Set table. .1.3.6.1.4.1.1991.1.2.11.14.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetEntry,,not-accessible,snBgp4RouteMapSetMapName:snBgp4RouteMapSetSequenceNum,current,,An entry in the Bgp4 Route Map Set table. .1.3.6.1.4.1.1991.1.2.11.14.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetMapName,OCTET,read-only,,current,,An octet string of the route-map name, each character of the name is represented by one octet. .1.3.6.1.4.1.1991.1.2.11.14.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetSequenceNum,Integer32,read-only,,current,,A sequence number for this particular route-map. -.1.3.6.1.4.1.1991.1.2.11.14.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAsPathType,INTEGER,read-write,,current,tag(0):prepend(1),To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map. +.1.3.6.1.4.1.1991.1.2.11.14.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAsPathType,INTEGER,read-write,,current,tag(0):prepend(1),To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map. .1.3.6.1.4.1.1991.1.2.11.14.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAsPathString,OCTET,read-write,,current,,as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). .1.3.6.1.4.1.1991.1.2.11.14.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAutoTag,INTEGER,read-write,,current,disabled(0):enabled(1),To enable/disable the automatic-tag for BGP routes. .1.3.6.1.4.1.1991.1.2.11.14.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityType,INTEGER,read-write,,current,nums(0):none(3),To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00 @@ -6589,8 +7106,8 @@ .1.3.6.1.4.1.1991.1.2.11.14.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetOrigin,INTEGER,read-write,,current,igp(0):egp(1):incomplete(2),To set the BGP origin code. .1.3.6.1.4.1.1991.1.2.11.14.1.1.13,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetTag,Integer32,read-write,,current,,To specify the tag for BGP routes. .1.3.6.1.4.1.1991.1.2.11.14.1.1.14,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetWeight,INTEGER,read-write,,current,,To specify the BGP weight for the routing table. -.1.3.6.1.4.1.1991.1.2.11.14.1.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetRowMask,Integer32,read-write,,current,,This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset -.1.3.6.1.4.1.1991.1.2.11.14.1.1.16,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityNums,OCTET,read-write,,current,,Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.14.1.1.15,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetRowMask,Integer32,read-write,,current,,This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset +.1.3.6.1.4.1.1991.1.2.11.14.1.1.16,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityNums,OCTET,read-write,,current,,Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. .1.3.6.1.4.1.1991.1.2.11.14.1.1.17,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenHalfLife,INTEGER,read-write,,current,,Bgp4 Route Map Dampening Half Life. .1.3.6.1.4.1.1991.1.2.11.14.1.1.18,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenReuse,INTEGER,read-write,,current,,Bgp4 Route Map Dampening Reuse. .1.3.6.1.4.1.1991.1.2.11.14.1.1.19,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenSuppress,INTEGER,read-write,,current,,Bgp4 Route Map Dampening Suppress. @@ -6605,7 +7122,7 @@ .1.3.6.1.4.1.1991.1.2.11.15.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusState,INTEGER,read-only,,current,noState(0):idle(1):connect(2):active(3):openSent(4):openConfirm(5):established(6),To show the state of this neighbor. .1.3.6.1.4.1.1991.1.2.11.15.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveTime,Integer32,read-only,,current,,The Keep alive timer. .1.3.6.1.4.1.1991.1.2.11.15.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusHoldTime,Integer32,read-only,,current,,The Hold time timer. -.1.3.6.1.4.1.1991.1.2.11.15.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusAdvertlevel,Integer32,read-only,,current,,To show the minimum interval between the sending of BGP routing updates. +.1.3.6.1.4.1.1991.1.2.11.15.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusAdvertlevel,Integer32,read-only,,current,,To show the minimum interval between the sending of BGP routing updates. .1.3.6.1.4.1.1991.1.2.11.15.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveTxCounts,Counter32,read-only,,current,,Keep alive message sent counts. .1.3.6.1.4.1.1991.1.2.11.15.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveRxCounts,Counter32,read-only,,current,,Keep alive message received counts. .1.3.6.1.4.1.1991.1.2.11.15.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusUpdateTxCounts,Counter32,read-only,,current,,Update message sent counts. @@ -6627,8 +7144,8 @@ .1.3.6.1.4.1.1991.1.2.11.16.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusOrigin,INTEGER,read-only,,current,igp(0):egp(1):incomplete(2),To show the origin of this route. .1.3.6.1.4.1.1991.1.2.11.16.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusStatus,Integer32,read-only,,current,,A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid. .1.3.6.1.4.1.1991.1.2.11.16.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusRouteTag,Integer32,read-only,,current,,To show the route tag of this route. -.1.3.6.1.4.1.1991.1.2.11.16.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusCommunityList,OCTET,read-only,,current,,To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 -.1.3.6.1.4.1.1991.1.2.11.16.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusAsPathList,OCTET,read-only,,current,,To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.16.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusCommunityList,OCTET,read-only,,current,,To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 +.1.3.6.1.4.1.1991.1.2.11.16.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusAsPathList,OCTET,read-only,,current,,To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.17,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighborSummary,,,,,, .1.3.6.1.4.1.1991.1.2.11.17.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryTable,,not-accessible,,current,,Bgp4 Routebor Operational Status table. .1.3.6.1.4.1.1991.1.2.11.17.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryEntry,,not-accessible,snBgp4NeighborSummaryIndex,current,,An entry in the Bgp4 Operational Status table. @@ -6649,37 +7166,37 @@ .1.3.6.1.4.1.1991.1.2.11.18.1.1.6,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeRouterId,IpAddress,read-only,,current,,The router ID for an attribute entry. .1.3.6.1.4.1.1991.1.2.11.18.1.1.7,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeAtomicAggregatePresent,INTEGER,read-only,,current,false(0):true(1),The atomic aggregate present in an attribute entry. .1.3.6.1.4.1.1991.1.2.11.18.1.1.8,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeLocalPreference,Integer32,read-only,,current,,To show the local preference of a route entry. -.1.3.6.1.4.1.1991.1.2.11.18.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeCommunityList,OCTET,read-only,,current,,To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 -.1.3.6.1.4.1.1991.1.2.11.18.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeAsPathList,OCTET,read-only,,current,,To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. +.1.3.6.1.4.1.1991.1.2.11.18.1.1.9,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeCommunityList,OCTET,read-only,,current,,To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 +.1.3.6.1.4.1.1991.1.2.11.18.1.1.10,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeAsPathList,OCTET,read-only,,current,,To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. .1.3.6.1.4.1.1991.1.2.11.18.1.1.11,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeOriginator,IpAddress,read-only,,current,,The originator IP address for an attribute entry. -.1.3.6.1.4.1.1991.1.2.11.18.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeClusterList,OCTET,read-only,,current,,To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address. +.1.3.6.1.4.1.1991.1.2.11.18.1.1.12,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4AttributeClusterList,OCTET,read-only,,current,,To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address. .1.3.6.1.4.1.1991.1.2.11.19,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmd,,,,,, .1.3.6.1.4.1.1991.1.2.11.19.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdTable,,not-accessible,,current,,Clear Bgp4 command table. .1.3.6.1.4.1.1991.1.2.11.19.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdEntry,,not-accessible,snBgp4ClearNeighborCmdIp,current,,An entry in the clear Bgp4 neighbor command table. -.1.3.6.1.4.1.1991.1.2.11.19.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. +.1.3.6.1.4.1.1991.1.2.11.19.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. .1.3.6.1.4.1.1991.1.2.11.19.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdElement,INTEGER,read-write,,current,valid(0):lastPacketWithError(1):notificationErrors(2):softOutbound(3):traffic(4):neighbor(5),To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. .1.3.6.1.4.1.1991.1.2.11.20,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroup,,,,,, .1.3.6.1.4.1.1991.1.2.11.20.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupTable,,not-accessible,,current,,Bgp4 Neighbor Prefix Group table. .1.3.6.1.4.1.1991.1.2.11.20.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupEntry,,not-accessible,snBgp4NeighPrefixGroupNeighIp:snBgp4NeighPrefixGroupDir,current,,An entry in the Bgp4 Prefix Group table. .1.3.6.1.4.1.1991.1.2.11.20.1.1.1,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupNeighIp,IpAddress,read-only,,current,,The IP Address for a neighbor entry. -.1.3.6.1.4.1.1991.1.2.11.20.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. +.1.3.6.1.4.1.1991.1.2.11.20.1.1.2,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupDir,INTEGER,read-only,,current,out(0):in(1),The incoming/outgoing advertisements to which the access list is applied. .1.3.6.1.4.1.1991.1.2.11.20.1.1.3,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupInAccessList,OCTET,read-write,,current,,An in access prefix list name. .1.3.6.1.4.1.1991.1.2.11.20.1.1.4,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupOutAccessList,OCTET,read-write,,current,,An out prefix list name. .1.3.6.1.4.1.1991.1.2.11.20.1.1.5,FOUNDRY-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupRowStatus,INTEGER,read-write,,current,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid -.1.3.6.1.4.1.1991.1.2.12,FOUNDRY-SN-ROOT-MIB::snVrrp,,,,,, +.1.3.6.1.4.1.1991.1.2.12,FOUNDRY-SN-IP-VRRP-MIB::snVrrp,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.4.1.1991.1.2.12.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpGlobal,,,,,, -.1.3.6.1.4.1.1991.1.2.12.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpGroupOperMode,INTEGER,read-write,,current,disabled(0):enabled(1),The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP +.1.3.6.1.4.1.1991.1.2.12.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpGroupOperMode,INTEGER,read-write,,current,disabled(0):enabled(1),The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP .1.3.6.1.4.1.1991.1.2.12.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfStateChangeTrap,INTEGER,read-write,,current,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps. DEFVAL { enabled } .1.3.6.1.4.1.1991.1.2.12.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfMaxNumVridPerIntf,Integer32,read-only,,current,,Indicates the maximum number of VRID per interface. .1.3.6.1.4.1.1991.1.2.12.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfMaxNumVridPerSystem,Integer32,read-only,,current,,Indicates the maximum number of VRID per system. .1.3.6.1.4.1.1991.1.2.12.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpClearVrrpStat,INTEGER,read-write,,current,normal(0):clear(1),Clear VRRP statistics command. -.1.3.6.1.4.1.1991.1.2.12.1.6,FOUNDRY-SN-IP-VRRP-MIB::snVrrpGroupOperModeVrrpextended,INTEGER,read-write,,current,disabled(0):enabled(1),The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(1)...........activate VRRP extended +.1.3.6.1.4.1.1991.1.2.12.1.6,FOUNDRY-SN-IP-VRRP-MIB::snVrrpGroupOperModeVrrpextended,INTEGER,read-write,,current,disabled(0):enabled(1),The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(1)...........activate VRRP extended .1.3.6.1.4.1.1991.1.2.12.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIntf,,,,,, .1.3.6.1.4.1.1991.1.2.12.2.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfTable,,not-accessible,,deprecated,,The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. .1.3.6.1.4.1.1991.1.2.12.2.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfEntry,,not-accessible,snVrrpIfPort,deprecated,,The VRRP Interface Entry describes one interface from the viewpoint of VRRP. .1.3.6.1.4.1.1991.1.2.12.2.1.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfPort,Integer32,read-only,,deprecated,,The IP port of this VRRP interface. .1.3.6.1.4.1.1991.1.2.12.2.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfAuthType,INTEGER,read-write,,deprecated,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface. -.1.3.6.1.4.1.1991.1.2.12.2.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfAuthPassword,OCTET,read-write,,deprecated,,The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). +.1.3.6.1.4.1.1991.1.2.12.2.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfAuthPassword,OCTET,read-write,,deprecated,,The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). .1.3.6.1.4.1.1991.1.2.12.2.1.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfRxHeaderErrCnts,Counter32,read-only,,deprecated,,The received Header error counts in this interface. .1.3.6.1.4.1.1991.1.2.12.2.1.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfRxAuthTypeErrCnts,Counter32,read-only,,deprecated,,The received authentication type error counts in this interface. .1.3.6.1.4.1.1991.1.2.12.2.1.1.6,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIfRxAuthPwdMismatchErrCnts,Counter32,read-only,,deprecated,,The received authentication password mismatched error counts in this interface. @@ -6689,9 +7206,9 @@ .1.3.6.1.4.1.1991.1.2.12.3.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrEntry,,not-accessible,snVrrpVirRtrPort:snVrrpVirRtrId,deprecated,,The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. .1.3.6.1.4.1.1991.1.2.12.3.1.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrPort,Integer32,read-only,,deprecated,,The IP port of this VRRP interface. .1.3.6.1.4.1.1991.1.2.12.3.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrId,INTEGER,read-only,,deprecated,,One of the virtual router ID of this VRRP interface. -.1.3.6.1.4.1.1991.1.2.12.3.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrOwnership,INTEGER,read-write,,deprecated,incomplete(0):owner(1):backup(2),The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface. +.1.3.6.1.4.1.1991.1.2.12.3.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrOwnership,INTEGER,read-write,,deprecated,incomplete(0):owner(1):backup(2),The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface. .1.3.6.1.4.1.1991.1.2.12.3.1.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrCfgPriority,INTEGER,read-write,,deprecated,,The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2). DEFVAL { 100 } -.1.3.6.1.4.1.1991.1.2.12.3.1.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPriority,INTEGER,read-write,,deprecated,,The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. +.1.3.6.1.4.1.1991.1.2.12.3.1.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPriority,INTEGER,read-write,,deprecated,,The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.2.12.3.1.1.6,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrCurrPriority,INTEGER,read-only,,deprecated,,The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.2.12.3.1.1.7,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrHelloInt,INTEGER,read-write,,deprecated,,Time interval between advertisements (seconds). DEFVAL { 1 } .1.3.6.1.4.1.1991.1.2.12.3.1.1.8,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrDeadInt,INTEGER,read-write,,deprecated,,Dead interval (seconds). DEFVAL { 1 } @@ -6699,8 +7216,8 @@ .1.3.6.1.4.1.1991.1.2.12.3.1.1.10,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrState,INTEGER,read-only,,deprecated,init(0):master(1):backup(2),This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. .1.3.6.1.4.1.1991.1.2.12.3.1.1.11,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrActivate,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. .1.3.6.1.4.1.1991.1.2.12.3.1.1.12,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrIpAddrMask,OCTET,read-write,,deprecated,,The numbers of IP Addresses of this virtual router of this interface. -.1.3.6.1.4.1.1991.1.2.12.3.1.1.13,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList) -.1.3.6.1.4.1.1991.1.2.12.3.1.1.14,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifMask,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList) +.1.3.6.1.4.1.1991.1.2.12.3.1.1.13,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList) +.1.3.6.1.4.1.1991.1.2.12.3.1.1.14,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifMask,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList) .1.3.6.1.4.1.1991.1.2.12.3.1.1.15,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid .1.3.6.1.4.1.1991.1.2.12.3.1.1.16,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrRxArpPktDropCnts,Counter32,read-only,,deprecated,,The received VRRP ARP Packet Drop Counts. .1.3.6.1.4.1.1991.1.2.12.3.1.1.17,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrRxIpPktDropCnts,Counter32,read-only,,deprecated,,The received VRRP IP Packet Drop Counts. @@ -6713,13 +7230,13 @@ .1.3.6.1.4.1.1991.1.2.12.3.1.1.24,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTransToMasterStateCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface transition to master state. .1.3.6.1.4.1.1991.1.2.12.3.1.1.25,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTransToBackupStateCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface transition to backup state. .1.3.6.1.4.1.1991.1.2.12.3.1.1.26,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrCurrDeadInt,Integer32,read-only,,deprecated,,Current Dead interval (in 100 milliseconds). -.1.3.6.1.4.1.1991.1.2.12.3.1.1.27,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership. -.1.3.6.1.4.1.1991.1.2.12.3.1.1.28,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership. +.1.3.6.1.4.1.1991.1.2.12.3.1.1.27,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership. +.1.3.6.1.4.1.1991.1.2.12.3.1.1.28,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership. .1.3.6.1.4.1.1991.1.2.12.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIntf2,,,,,, .1.3.6.1.4.1.1991.1.2.12.4.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2Table,,not-accessible,,current,,The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE. .1.3.6.1.4.1.1991.1.2.12.4.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2Entry,,not-accessible,ifIndex,current,,The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE. .1.3.6.1.4.1.1991.1.2.12.4.1.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2AuthType,INTEGER,read-write,,current,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface. -.1.3.6.1.4.1.1991.1.2.12.4.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2AuthPassword,OCTET,read-write,,current,,The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1). +.1.3.6.1.4.1.1991.1.2.12.4.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2AuthPassword,OCTET,read-write,,current,,The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1). .1.3.6.1.4.1.1991.1.2.12.4.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2RxHeaderErrCnts,Counter32,read-only,,current,,The received Header error counts in this interface. .1.3.6.1.4.1.1991.1.2.12.4.1.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2RxAuthTypeErrCnts,Counter32,read-only,,current,,The received authentication type error counts in this interface. .1.3.6.1.4.1.1991.1.2.12.4.1.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpIf2RxAuthPwdMismatchErrCnts,Counter32,read-only,,current,,The received authentication password mismatched error counts in this interface. @@ -6728,9 +7245,9 @@ .1.3.6.1.4.1.1991.1.2.12.5.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2Table,,not-accessible,,current,,The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. .1.3.6.1.4.1.1991.1.2.12.5.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2Entry,,not-accessible,ifIndex:snVrrpVirRtr2Id,current,,The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. .1.3.6.1.4.1.1991.1.2.12.5.1.1.1,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2Id,INTEGER,read-only,,current,,One of the virtual router ID of this Vrrp and Vrrpe interface. -.1.3.6.1.4.1.1991.1.2.12.5.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2Ownership,INTEGER,read-write,,current,incomplete(0):owner(1):backup(2),The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0). -.1.3.6.1.4.1.1991.1.2.12.5.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2CfgPriority,INTEGER,read-write,,current,,This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE. DEFVAL { 100 } -.1.3.6.1.4.1.1991.1.2.12.5.1.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. After this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. +.1.3.6.1.4.1.1991.1.2.12.5.1.1.2,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2Ownership,INTEGER,read-write,,current,incomplete(0):owner(1):backup(2),The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0). +.1.3.6.1.4.1.1991.1.2.12.5.1.1.3,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2CfgPriority,INTEGER,read-write,,current,,This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE. DEFVAL { 100 } +.1.3.6.1.4.1.1991.1.2.12.5.1.1.4,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPriority,INTEGER,read-write,,current,,The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.2.12.5.1.1.5,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2CurrPriority,INTEGER,read-only,,current,,The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN. .1.3.6.1.4.1.1991.1.2.12.5.1.1.6,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2HelloInt,INTEGER,read-write,,current,,Time interval between advertisements (seconds). DEFVAL { 1 } .1.3.6.1.4.1.1991.1.2.12.5.1.1.7,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2DeadInt,INTEGER,read-write,,current,,Dead interval (seconds). DEFVAL { 1 } @@ -6751,7 +7268,7 @@ .1.3.6.1.4.1.1991.1.2.12.5.1.1.22,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TransToMasterStateCnts,Counter32,read-only,,current,,The counts of the virtual router interface transition to master state. .1.3.6.1.4.1.1991.1.2.12.5.1.1.23,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TransToBackupStateCnts,Counter32,read-only,,current,,The counts of the virtual router interface transition to backup state. .1.3.6.1.4.1.1991.1.2.12.5.1.1.24,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2CurrDeadInt,Integer32,read-only,,current,,Current Dead interval (in 100 milliseconds). -.1.3.6.1.4.1.1991.1.2.12.5.1.1.25,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership. +.1.3.6.1.4.1.1991.1.2.12.5.1.1.25,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPortList,OCTET,read-write,,current,,This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership. .1.3.6.1.4.1.1991.1.2.12.5.1.1.26,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2AdvertiseBackup,INTEGER,read-write,,current,disabled(0):enabled(1),Set Advertise this backup router to master DEFVAL { disabled } .1.3.6.1.4.1.1991.1.2.12.5.1.1.27,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2MasterIpAddr,IpAddress,read-only,,current,,The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router. .1.3.6.1.4.1.1991.1.2.12.5.1.1.28,FOUNDRY-SN-IP-VRRP-MIB::snVrrpVirRtr2IpAddrCount,INTEGER,read-only,,current,,The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair. @@ -7002,7 +7519,7 @@ .1.3.6.1.4.1.1991.1.2.16.1.1.2.1.2,FDRY-ACL-MIB::brcdIpv6AccessListNextIndex,Unsigned32,read-only,,current,,When read provides the encoded Index - combination of IPv6 ACL id and next available filter id - which can be used as index while creating access list filter entry in the fdryIpv6AclTable. .1.3.6.1.4.1.1991.1.2.16.1.1.2.1.3,FDRY-ACL-MIB::brcdIpv6AccessListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),To create or delete a Ipv6 access list entry. The supported values are createAndGo(4) to create an entry in this table and destroy(6) to delete an entry from this table. Value of active(1) will be always returned for SNMP Get/GetNext operations. .1.3.6.1.4.1.1991.1.2.17,FOUNDRY-SN-ROOT-MIB::fdryIpv6,,,,,, -.1.3.6.1.4.1.1991.1.2.17.1,FDRY-IPV6-IP-MIB::fdryIpv6MIB,,,,,,The Brocade proprietary MIB module for IPv6. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.2.17.1,FDRY-IPV6-IP-MIB::fdryIpv6MIB,,,,,,The Ruckus Wireless proprietary MIB module for IPv6. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. .1.3.6.1.4.1.1991.1.2.17.1.1,FDRY-IPV6-IP-MIB::fdryIpv6GlobalObjects,,,,,, .1.3.6.1.4.1.1991.1.2.17.1.1.1,FDRY-IPV6-IP-MIB::fdryIpv6LoadShare,INTEGER,read-write,,current,disabled(0):enabled(1),If more than one ipv6 route available, use them to share load. .1.3.6.1.4.1.1991.1.2.17.1.1.2,FDRY-IPV6-IP-MIB::fdryIpv6LoadShareNumOfPaths,Unsigned32,read-write,,current,,Number of ipv6 routes are used to share load. @@ -7697,6 +8214,21 @@ .1.3.6.1.4.1.1991.1.3.48.9.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7250Switch,,,,,, .1.3.6.1.4.1.1991.1.3.48.9.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7250BaseL3Router,,,,,, .1.3.6.1.4.1.1991.1.3.48.9.3,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7250Router,,,,,, +.1.3.6.1.4.1.1991.1.3.48.10,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7150,,,,,, +.1.3.6.1.4.1.1991.1.3.48.10.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7150Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.48.10.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7150Router,,,,,, +.1.3.6.1.4.1.1991.1.3.48.11,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7650,,,,,, +.1.3.6.1.4.1.1991.1.3.48.11.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7650Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.48.11.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7650Router,,,,,, +.1.3.6.1.4.1.1991.1.3.48.12,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7850,,,,,, +.1.3.6.1.4.1.1991.1.3.48.12.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7850Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.48.12.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7850Router,,,,,, +.1.3.6.1.4.1.1991.1.3.48.13,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7550,,,,,, +.1.3.6.1.4.1.1991.1.3.48.13.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7550Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.48.13.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX7550Router,,,,,, +.1.3.6.1.4.1.1991.1.3.48.14,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX8200,,,,,, +.1.3.6.1.4.1.1991.1.3.48.14.1,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX8200Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.48.14.2,FOUNDRY-SN-ROOT-MIB::snFastIronStackICX8200Router,,,,,, .1.3.6.1.4.1.1991.1.3.49,FOUNDRY-SN-ROOT-MIB::snCes2000Family,,,,,, .1.3.6.1.4.1.1991.1.3.49.1,FOUNDRY-SN-ROOT-MIB::snCes2024F,,,,,, .1.3.6.1.4.1.1991.1.3.49.2,FOUNDRY-SN-ROOT-MIB::snCes2024C,,,,,, @@ -7704,8 +8236,6 @@ .1.3.6.1.4.1.1991.1.3.49.4,FOUNDRY-SN-ROOT-MIB::snCes2048C,,,,,, .1.3.6.1.4.1.1991.1.3.49.5,FOUNDRY-SN-ROOT-MIB::snCes2048FX,,,,,, .1.3.6.1.4.1.1991.1.3.49.6,FOUNDRY-SN-ROOT-MIB::snCes2048CX,,,,,, -.1.3.6.1.4.1.1991.1.3.49.7,FOUNDRY-SN-ROOT-MIB::snCes2024F4X,,,,,, -.1.3.6.1.4.1.1991.1.3.49.8,FOUNDRY-SN-ROOT-MIB::snCes2024C4X,,,,,, .1.3.6.1.4.1.1991.1.3.50,FOUNDRY-SN-ROOT-MIB::snFLSLCFamily,,,,,, .1.3.6.1.4.1.1991.1.3.50.1,FOUNDRY-SN-ROOT-MIB::snFLSLC624Family,,,,,, .1.3.6.1.4.1.1991.1.3.50.1.1,FOUNDRY-SN-ROOT-MIB::snFLSLC624BaseFamily,,,,,, @@ -7732,8 +8262,6 @@ .1.3.6.1.4.1.1991.1.3.51.4,FOUNDRY-SN-ROOT-MIB::snCer2048C,,,,,, .1.3.6.1.4.1.1991.1.3.51.5,FOUNDRY-SN-ROOT-MIB::snCer2048FX,,,,,, .1.3.6.1.4.1.1991.1.3.51.6,FOUNDRY-SN-ROOT-MIB::snCer2048CX,,,,,, -.1.3.6.1.4.1.1991.1.3.51.7,FOUNDRY-SN-ROOT-MIB::snCer2024F4X,,,,,, -.1.3.6.1.4.1.1991.1.3.51.8,FOUNDRY-SN-ROOT-MIB::snCer2024C4X,,,,,, .1.3.6.1.4.1.1991.1.3.52,FOUNDRY-SN-ROOT-MIB::snFWSFamily,,,,,, .1.3.6.1.4.1.1991.1.3.52.1,FOUNDRY-SN-ROOT-MIB::snFWS624Family,,,,,, .1.3.6.1.4.1.1991.1.3.52.1.1,FOUNDRY-SN-ROOT-MIB::snFWS624BaseFamily,,,,,, @@ -7829,15 +8357,6 @@ .1.3.6.1.4.1.1991.1.3.54.2.4.1.2,FOUNDRY-SN-ROOT-MIB::snFCX648BaseL3Router,,,,,, .1.3.6.1.4.1.1991.1.3.54.2.4.1.3,FOUNDRY-SN-ROOT-MIB::snFCX648Router,,,,,, .1.3.6.1.4.1.1991.1.3.54.2.4.1.4,FOUNDRY-SN-ROOT-MIB::snFCX648AdvRouter,,,,,, -.1.3.6.1.4.1.1991.1.3.55,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXeFamily,,,,,, -.1.3.6.1.4.1.1991.1.3.55.1,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe16,,,,,, -.1.3.6.1.4.1.1991.1.3.55.1.2,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe16Router,,,,,, -.1.3.6.1.4.1.1991.1.3.55.2,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe8,,,,,, -.1.3.6.1.4.1.1991.1.3.55.2.2,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe8Router,,,,,, -.1.3.6.1.4.1.1991.1.3.55.3,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe4,,,,,, -.1.3.6.1.4.1.1991.1.3.55.3.2,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe4Router,,,,,, -.1.3.6.1.4.1.1991.1.3.55.4,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe32,,,,,, -.1.3.6.1.4.1.1991.1.3.55.4.2,FOUNDRY-SN-ROOT-MIB::snBrocadeMLXe32Router,,,,,, .1.3.6.1.4.1.1991.1.3.56,FOUNDRY-SN-ROOT-MIB::snICX6610Family,,,,,, .1.3.6.1.4.1.1991.1.3.56.1,FOUNDRY-SN-ROOT-MIB::snICX661024Family,,,,,, .1.3.6.1.4.1.1991.1.3.56.1.1,FOUNDRY-SN-ROOT-MIB::snICX661024BaseFamily,,,,,, @@ -8021,6 +8540,136 @@ .1.3.6.1.4.1.1991.1.3.63.1,FOUNDRY-SN-ROOT-MIB::snFastIronSPX,,,,,, .1.3.6.1.4.1.1991.1.3.63.1.1,FOUNDRY-SN-ROOT-MIB::snFastIronSPXSwitch,,,,,, .1.3.6.1.4.1.1991.1.3.63.1.2,FOUNDRY-SN-ROOT-MIB::snFastIronSPXRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64,FOUNDRY-SN-ROOT-MIB::snICX7150Family,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1,FOUNDRY-SN-ROOT-MIB::snICX715024Family,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.1,FOUNDRY-SN-ROOT-MIB::snICX715024BaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX715024,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX715024Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX715024Router,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.2,FOUNDRY-SN-ROOT-MIB::snICX715024POEFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.2.1,FOUNDRY-SN-ROOT-MIB::snICX715024POE,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX715024POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX715024POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.3,FOUNDRY-SN-ROOT-MIB::snICX715024FFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.3.1,FOUNDRY-SN-ROOT-MIB::snICX715024F,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX715024FSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.1.3.1.2,FOUNDRY-SN-ROOT-MIB::snICX715024FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2,FOUNDRY-SN-ROOT-MIB::snICX715048Family,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.1,FOUNDRY-SN-ROOT-MIB::snICX715048BaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX715048,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX715048Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX715048Router,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.2,FOUNDRY-SN-ROOT-MIB::snICX715048POEFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.2.1,FOUNDRY-SN-ROOT-MIB::snICX715048POE,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX715048POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX715048POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.3,FOUNDRY-SN-ROOT-MIB::snICX715048POEFFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.3.1,FOUNDRY-SN-ROOT-MIB::snICX715048POEF,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX715048POEFSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.3.1.2,FOUNDRY-SN-ROOT-MIB::snICX715048POEFRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.4,FOUNDRY-SN-ROOT-MIB::snICX715048ZPFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.4.1,FOUNDRY-SN-ROOT-MIB::snICX715048ZP,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.4.1.1,FOUNDRY-SN-ROOT-MIB::snICX715048ZPSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.2.4.1.2,FOUNDRY-SN-ROOT-MIB::snICX715048ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.3,FOUNDRY-SN-ROOT-MIB::snICX7150C12POEFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.3.1,FOUNDRY-SN-ROOT-MIB::snICX7150C12POEBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C12POE,,,,,, +.1.3.6.1.4.1.1991.1.3.64.3.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C12POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.3.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX7150C12POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.4,FOUNDRY-SN-ROOT-MIB::snICX7150C10ZPFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.4.1,FOUNDRY-SN-ROOT-MIB::snICX7150C10ZPBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.4.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C10ZP,,,,,, +.1.3.6.1.4.1.1991.1.3.64.4.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C10ZPSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.4.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX7150C10ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.64.5,FOUNDRY-SN-ROOT-MIB::snICX7150C08PFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.5.1,FOUNDRY-SN-ROOT-MIB::snICX7150C08PBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.64.5.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C08P,,,,,, +.1.3.6.1.4.1.1991.1.3.64.5.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX7150C08PSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.64.5.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX7150C08PRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.65,FOUNDRY-SN-ROOT-MIB::snICX7650Family,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1,FOUNDRY-SN-ROOT-MIB::snICX765048Family,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.1,FOUNDRY-SN-ROOT-MIB::snICX765048POEBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX765048POE,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX765048POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX765048POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.2,FOUNDRY-SN-ROOT-MIB::snICX765048FBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.2.1,FOUNDRY-SN-ROOT-MIB::snICX765048F,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX765048FSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX765048FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.3,FOUNDRY-SN-ROOT-MIB::snICX765048ZPBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.3.1,FOUNDRY-SN-ROOT-MIB::snICX765048ZP,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX765048ZPSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.65.1.3.1.2,FOUNDRY-SN-ROOT-MIB::snICX765048ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.66,FOUNDRY-SN-ROOT-MIB::snICX7850Family,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1,FOUNDRY-SN-ROOT-MIB::snICX785048Family,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.1,FOUNDRY-SN-ROOT-MIB::snICX785048FBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX785048F,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX785048FSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX785048FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.2,FOUNDRY-SN-ROOT-MIB::snICX785048FSBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.2.1,FOUNDRY-SN-ROOT-MIB::snICX785048FS,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX785048FSSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.66.1.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX785048FSRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.66.2,FOUNDRY-SN-ROOT-MIB::snICX785032QFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.66.2.1,FOUNDRY-SN-ROOT-MIB::snICX785032QBaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.66.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX785032Q,,,,,, +.1.3.6.1.4.1.1991.1.3.66.2.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX785032QSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.66.2.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX785032QRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67,FOUNDRY-SN-ROOT-MIB::snICX7550Family,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1,FOUNDRY-SN-ROOT-MIB::snICX755024Family,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024BaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX755024Router,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.2,FOUNDRY-SN-ROOT-MIB::snICX755024POEFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.2.1,FOUNDRY-SN-ROOT-MIB::snICX755024POE,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX755024POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.3,FOUNDRY-SN-ROOT-MIB::snICX755024FFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.3.1,FOUNDRY-SN-ROOT-MIB::snICX755024F,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024FSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.3.1.2,FOUNDRY-SN-ROOT-MIB::snICX755024FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.4,FOUNDRY-SN-ROOT-MIB::snICX755024ZPFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.4.1,FOUNDRY-SN-ROOT-MIB::snICX755024ZP,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.4.1.1,FOUNDRY-SN-ROOT-MIB::snICX755024ZPSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.1.4.1.2,FOUNDRY-SN-ROOT-MIB::snICX755024ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2,FOUNDRY-SN-ROOT-MIB::snICX755048Family,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.1,FOUNDRY-SN-ROOT-MIB::snICX755048BaseFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX755048,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.1.1.1,FOUNDRY-SN-ROOT-MIB::snICX755048Switch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.1.1.2,FOUNDRY-SN-ROOT-MIB::snICX755048Router,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.2,FOUNDRY-SN-ROOT-MIB::snICX755048POEFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.2.1,FOUNDRY-SN-ROOT-MIB::snICX755048POE,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.2.1.1,FOUNDRY-SN-ROOT-MIB::snICX755048POESwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.2.1.2,FOUNDRY-SN-ROOT-MIB::snICX755048POERouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.3,FOUNDRY-SN-ROOT-MIB::snICX755048FFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.3.1,FOUNDRY-SN-ROOT-MIB::snICX755048F,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.3.1.1,FOUNDRY-SN-ROOT-MIB::snICX755048FSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.3.1.2,FOUNDRY-SN-ROOT-MIB::snICX755048FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.4,FOUNDRY-SN-ROOT-MIB::snICX755048ZPFamily,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.4.1,FOUNDRY-SN-ROOT-MIB::snICX755048ZP,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.4.1.1,FOUNDRY-SN-ROOT-MIB::snICX755048ZPSwitch,,,,,, +.1.3.6.1.4.1.1991.1.3.67.2.4.1.2,FOUNDRY-SN-ROOT-MIB::snICX755048ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68,FOUNDRY-SN-ROOT-MIB::snICX8200Family,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1,FOUNDRY-SN-ROOT-MIB::snICX820024Family,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1.1,FOUNDRY-SN-ROOT-MIB::snICX820024Router,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1.2,FOUNDRY-SN-ROOT-MIB::snICX820024PRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1.3,FOUNDRY-SN-ROOT-MIB::snICX820024ZPRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1.4,FOUNDRY-SN-ROOT-MIB::snICX820024FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.1.5,FOUNDRY-SN-ROOT-MIB::snICX820024FXRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2,FOUNDRY-SN-ROOT-MIB::snICX820048Family,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.1,FOUNDRY-SN-ROOT-MIB::snICX820048Router,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.2,FOUNDRY-SN-ROOT-MIB::snICX820048PRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.3,FOUNDRY-SN-ROOT-MIB::snICX820048PFRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.4,FOUNDRY-SN-ROOT-MIB::snICX820048PF2Router,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.5,FOUNDRY-SN-ROOT-MIB::snICX820048ZP2Router,,,,,, +.1.3.6.1.4.1.1991.1.3.68.2.6,FOUNDRY-SN-ROOT-MIB::snICX820048FRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3,FOUNDRY-SN-ROOT-MIB::snICX8200C08Family,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3.1,FOUNDRY-SN-ROOT-MIB::snICX8200C08PRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3.2,FOUNDRY-SN-ROOT-MIB::snICX8200C08PDCRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3.3,FOUNDRY-SN-ROOT-MIB::snICX8200C08PTRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3.4,FOUNDRY-SN-ROOT-MIB::snICX8200C08PFRouter,,,,,, +.1.3.6.1.4.1.1991.1.3.68.3.5,FOUNDRY-SN-ROOT-MIB::snICX8200C08ZPRouter,,,,,, .1.3.6.1.4.1.1991.1.4,FOUNDRY-SN-ROOT-MIB::edgeIron,,,,,, .1.3.6.1.4.1.1991.1.4.1,FOUNDRY-SN-ROOT-MIB::edgeIronMib,,,,,, .1.3.6.1.4.1.1991.1.5,FOUNDRY-SN-ROOT-MIB::edgeIronType2,,,,,, @@ -8366,9 +9015,7 @@ .1.3.6.1.4.1.1991.1.15,FOUNDRY-SN-ROOT-MIB::ironPointWireless,,,,,, .1.3.6.1.4.1.1991.1.15.1,FOUNDRY-SN-ROOT-MIB::ironPointWirelessRFS,,,,,, .1.3.6.1.4.1.1991.1.15.2,FOUNDRY-SN-ROOT-MIB::ironPointWirelessAP,,,,,, -.1.3.6.1.4.1.1991.1.16,FOUNDRY-SN-ROOT-MIB::ethernetAccessSwitchFamily,,,,,, -.1.3.6.1.4.1.1991.1.16.1,FOUNDRY-SN-ROOT-MIB::ethernetAccessSwitchBr6910,,,,,, -.1.3.6.1.4.1.1991.1.17,BROCADE-ENTITY-OID-MIB::brcdEntityOIDMIB,,,,,,This module defines the object identifiers (OIDs) for various physical components on Brocade products. These OIDs are used for representing entPhysicalVendorType in Entity MIB's entPhysicalTable (RFC 4133). Copyright 1996-2012 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.1.17,BROCADE-ENTITY-OID-MIB::brcdEntityOIDMIB,,,,,,This module defines the object identifiers (OIDs) for various physical components on Ruckus Wireless products. These OIDs are used for representing entPhysicalVendorType in Entity MIB's entPhysicalTable (RFC 4133). Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. .1.3.6.1.4.1.1991.1.17.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDMIBObjects,,,,,, .1.3.6.1.4.1.1991.1.17.1.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDOther,,,,,, .1.3.6.1.4.1.1991.1.17.1.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDUnknown,,,,,, @@ -8407,6 +9054,70 @@ .1.3.6.1.4.1.1991.1.17.1.3.6.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisMLXe8,,,,,, .1.3.6.1.4.1.1991.1.17.1.3.6.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisMLXe16,,,,,, .1.3.6.1.4.1.1991.1.17.1.3.6.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisMLXe32,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7250Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX725024,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX725024HPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX725024G,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX725048,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.7.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX725048HPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7450Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745024,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745024HPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745032ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745048,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745048HPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.8.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX745048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7750Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.9.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX775048C,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.9.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX775048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.9.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX775026Q,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7150Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715024,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715024POE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715048,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715048POE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715048POEF,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7150C12POE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715048ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX715024F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7150C10ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7150C08P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.10.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7150C08PT,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7650Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.11.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX765048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.11.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX765048P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.11.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX765048ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.12,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7850Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.12.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX785032Q,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.12.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX785048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.12.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX785048FS,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.12.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX785048C,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX7550Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755024,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755024F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755024P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755024ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755048,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755048P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.13.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX755048ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820024,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820024F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820024FX,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820024P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820024ZP,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048F,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048PF,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048PF2,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX820048ZP2,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.12,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200C08P,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.13,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200C08PF,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.14,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200C08PT,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.15,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200C08PDC,,,,,, +.1.3.6.1.4.1.1991.1.17.1.3.14.16,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisICX8200C08ZP,,,,,, .1.3.6.1.4.1.1991.1.17.1.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDBackplane,,,,,, .1.3.6.1.4.1.1991.1.17.1.4.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDBackplaneUnknown,,,,,, .1.3.6.1.4.1.1991.1.17.1.4.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDBackplaneNetIronFamily,,,,,, @@ -8439,6 +9150,10 @@ .1.3.6.1.4.1.1991.1.17.1.6.13,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyDC2400W,,,,,, .1.3.6.1.4.1.1991.1.17.1.6.14,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyAC3000W,,,,,, .1.3.6.1.4.1.1991.1.17.1.6.15,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyDC3000W,,,,,, +.1.3.6.1.4.1.1991.1.17.1.6.16,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyACPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.6.17,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyACRegular,,,,,, +.1.3.6.1.4.1.1991.1.17.1.6.18,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyDCPOE,,,,,, +.1.3.6.1.4.1.1991.1.17.1.6.19,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPowerSupplyDCRegular,,,,,, .1.3.6.1.4.1.1991.1.17.1.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDFan,,,,,, .1.3.6.1.4.1.1991.1.17.1.7.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDFanUnknown,,,,,, .1.3.6.1.4.1.1991.1.17.1.7.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDChassisFanTray,,,,,, @@ -8461,6 +9176,70 @@ .1.3.6.1.4.1.1991.1.17.1.9.2.3.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtBrMlxMr2X,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.2.3.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtBrMlx32Mr2M,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.2.3.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtBrMlx32Mr2X,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250624BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250648BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250624GBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250624PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.4.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7250648PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450624BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450648BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450648FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450624PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450648PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.5.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7450632ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7750Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.6.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx775048CBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.6.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx775048FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.6.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx775026QBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.6.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx775020QBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150624BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150648BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150624PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150648PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150648PoeFBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150612CPoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150648ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150624FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150C10ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150C08PBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.7.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7150C08PTBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7650Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.8.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7650648FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.8.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7650648PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.8.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7650648ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7850Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.9.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7850632QBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.9.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7850648FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.9.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7850648FSBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550624BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550648BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550624FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550648FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550624PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550648PoeBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550624ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.10.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx7550648ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200624BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200624FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200624FXBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200624PBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200624ZPBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648FBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648PBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648PFBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648PF2BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx8200648ZP2BaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.12,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx82006C08PBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.13,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx82006C08PDCBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.14,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx82006C08PFBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.15,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx82006C08PTBaseModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.2.11.16,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleMgmtIcx82006C08ZPBaseModule,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleSfm,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.3.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleSfmUnknown,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.3.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleSfmNetIronFamily,,,,,, @@ -8508,6 +9287,48 @@ .1.3.6.1.4.1.1991.1.17.1.9.5.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleOpticsCFP,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.5.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleOpticsQSFPP,,,,,, .1.3.6.1.4.1.1991.1.17.1.9.5.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleOpticsCFP2,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.5.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleOpticsGBIC,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleService,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceUnknown,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7250Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.2.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7250sfpplus8Port80gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.2.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7250sfpplus4Port4gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7450Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7400sfpplus4Port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7400copper4Port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7400sfp4Port4gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7400qsfpplus1Port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.3.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7400ServiceModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7750Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.4.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7750QSFP6port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.4.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx77506Q6port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150sfpplus2Port20gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150sfpplus4Port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150gc2Port2gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150sfpplus8Port80gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150gsfp2Port2gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.5.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7150gc2Port20gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7650Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7600xgf4Port40gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7600qsfp2port80gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7600100g1port100gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7650qsfp4port160gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7650100g2port200gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.6.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7650qsfp2port80gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7850Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.7.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx78508port800gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.7.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx785012port1200gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx7550Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.8.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx75502port80gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.8.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx75502port200gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx8200Family,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82004Port100gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82008Port200gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82002Port2gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82002Port20gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82002Port50gModule,,,,,, +.1.3.6.1.4.1.1991.1.17.1.9.6.9.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDModuleServiceIcx82002Port20gcfModule,,,,,, .1.3.6.1.4.1.1991.1.17.1.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort,,,,,, .1.3.6.1.4.1.1991.1.17.1.10.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPortUnknown,,,,,, .1.3.6.1.4.1.1991.1.17.1.10.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPortMgmtSerial,,,,,, @@ -8520,8 +9341,23 @@ .1.3.6.1.4.1.1991.1.17.1.10.9,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort40GigBaseFx,,,,,, .1.3.6.1.4.1.1991.1.17.1.10.10,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort100GigBaseFx,,,,,, .1.3.6.1.4.1.1991.1.17.1.10.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort10GigBaseTx,,,,,, +.1.3.6.1.4.1.1991.1.17.1.10.12,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort25GigBaseTx,,,,,, +.1.3.6.1.4.1.1991.1.17.1.10.13,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort40GigBaseTx,,,,,, +.1.3.6.1.4.1.1991.1.17.1.10.14,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort2500BaseTx,,,,,, +.1.3.6.1.4.1.1991.1.17.1.10.15,BROCADE-ENTITY-OID-MIB::brcdEntityOIDPort5GigBaseTx,,,,,, .1.3.6.1.4.1.1991.1.17.1.11,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStack,,,,,, .1.3.6.1.4.1.1991.1.17.1.11.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackUnknown,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackFamily,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7250,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7450,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7750,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.4,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7150,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.5,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7650,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.6,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7850,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.7,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx7550,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.2.8,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXStackIcx8200,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.3,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXSPXFamily,,,,,, +.1.3.6.1.4.1.1991.1.17.1.11.3.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDStackICXSPX,,,,,, .1.3.6.1.4.1.1991.1.17.1.12,BROCADE-ENTITY-OID-MIB::brcdEntityOIDCpu,,,,,, .1.3.6.1.4.1.1991.1.17.1.12.1,BROCADE-ENTITY-OID-MIB::brcdEntityOIDCpuUnknown,,,,,, .1.3.6.1.4.1.1991.1.17.1.12.2,BROCADE-ENTITY-OID-MIB::brcdEntityOIDCpuPPC7447A,,,,,, @@ -8607,7 +9443,7 @@ .1.3.6.1.4.1.1991.3.3.1.3.2.1,FOUNDRY-BFD-STD-MIB::bfdModuleFullCompliance,,,,,,Compliance statement for agents that provide full support for BFD-MIB. Such devices can then be monitored and also be configured using this MIB module. .1.3.6.1.4.1.1991.3.4,FOUNDRY-SN-ROOT-MIB::vplsRoot,,,,,, .1.3.6.1.4.1.1991.3.5,FOUNDRY-SN-ROOT-MIB::bgp4V2Root,,,,,, -.1.3.6.1.4.1.1991.4,FOUNDRY-SN-AGENT-MIB::snAgent,,,,,,Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. +.1.3.6.1.4.1.1991.4,FOUNDRY-SN-AGENT-MIB::snAgent,,,,,, Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. .1.3.6.1.5,SNMPv2-SMI::security,,,,,, .1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,, .1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,, @@ -8654,189 +9490,3 @@ .1.3.6.1.6.3.10.3.1.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance,,,,,,The compliance statement for SNMP engines which implement the SNMP Management Framework MIB. .1.3.6.1.6.3.10.3.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBGroups,,,,,, .1.3.6.1.6.3.10.3.2.1,SNMP-FRAMEWORK-MIB::snmpEngineGroup,,,,,,A collection of objects for identifying and determining the configuration and current timeliness values of an SNMP engine. -.1.3.111,IEEE8021-TC-MIB::ieee,,,,,, -.1.3.111.2,IEEE8021-TC-MIB::standards-association-numbers-series-standards,,,,,, -.1.3.111.2.802,IEEE8021-TC-MIB::lan-man-stds,,,,,, -.1.3.111.2.802.1,IEEE8021-TC-MIB::ieee802dot1,,,,,, -.1.3.111.2.802.1.1,IEEE8021-TC-MIB::ieee802dot1mibs,,,,,, -.1.3.111.2.802.1.1.1,IEEE8021-TC-MIB::ieee8021TcMib,,,,,,Textual conventions used throughout the various IEEE 802.1 MIB modules. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices. -.1.3.111.2.802.1.1.8,IEEE8021-CFM-MIB::ieee8021CfmMib,,,,,,Connectivity Fault Management module. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE Syd 802.1Q; see the draft itself for full legal notices. -.1.3.111.2.802.1.1.8.0,IEEE8021-CFM-MIB::dot1agNotifications,,,,,, -.1.3.111.2.802.1.1.8.0.1,IEEE8021-CFM-MIB::dot1agCfmFaultAlarm,,,,,,A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). -.1.3.111.2.802.1.1.8.1,IEEE8021-CFM-MIB::dot1agMIBObjects,,,,,, -.1.3.111.2.802.1.1.8.1.1,IEEE8021-CFM-MIB::dot1agCfmStack,,,,,, -.1.3.111.2.802.1.1.8.1.1.1,IEEE8021-CFM-MIB::dot1agCfmStackTable,,not-accessible,,deprecated,,There is one CFM Stack table per Bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1,IEEE8021-CFM-MIB::dot1agCfmStackEntry,,not-accessible,dot1agCfmStackifIndex:dot1agCfmStackVlanIdOrNone:dot1agCfmStackMdLevel:dot1agCfmStackDirection,deprecated,,The Stack table entry **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.1,IEEE8021-CFM-MIB::dot1agCfmStackifIndex,Integer32,not-accessible,,deprecated,,This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the dot1agCfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the dot1agCfmStackTable with the interface index. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.2,IEEE8021-CFM-MIB::dot1agCfmStackVlanIdOrNone,Integer32,not-accessible,,deprecated,,VLAN ID to which the MP is attached, or 0, if none. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.3,IEEE8021-CFM-MIB::dot1agCfmStackMdLevel,Integer32,not-accessible,,deprecated,,MD Level of the Maintenance Point. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.4,IEEE8021-CFM-MIB::dot1agCfmStackDirection,INTEGER,not-accessible,,deprecated,down(1):up(2),Direction in which the MP faces on the Bridge Port **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.5,IEEE8021-CFM-MIB::dot1agCfmStackMdIndex,Unsigned32,read-only,,deprecated,,The index of the Maintenance Domain in the dot1agCfmMdTable to which the MP is associated, or 0, if none. -.1.3.111.2.802.1.1.8.1.1.1.1.6,IEEE8021-CFM-MIB::dot1agCfmStackMaIndex,Unsigned32,read-only,,deprecated,,The index of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable to which the MP is associated, or 0, if none. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.1.1.1.7,IEEE8021-CFM-MIB::dot1agCfmStackMepId,Unsigned32,read-only,,deprecated,,If an MEP is configured, the MEPID, else 0 -.1.3.111.2.802.1.1.8.1.1.1.1.8,IEEE8021-CFM-MIB::dot1agCfmStackMacAddress,OCTET,read-only,,deprecated,,MAC address of the MP. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2,IEEE8021-CFM-MIB::dot1agCfmDefaultMd,,,,,, -.1.3.111.2.802.1.1.8.1.2.1,IEEE8021-CFM-MIB::dot1agCfmDefaultMdDefLevel,Integer32,read-write,,current,,A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdLevel object contains the value -1. After this initialization, this object needs to be persistent upon reboot or restart of a device. DEFVAL { 0 } -.1.3.111.2.802.1.1.8.1.2.2,IEEE8021-CFM-MIB::dot1agCfmDefaultMdDefMhfCreation,INTEGER,read-write,,current,defMHFnone(1):defMHFdefault(2):defMHFexplicit(3),A value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdMhfCreation object contains the value defMHFdefer. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. DEFVAL { defMHFnone } -.1.3.111.2.802.1.1.8.1.2.3,IEEE8021-CFM-MIB::dot1agCfmDefaultMdDefIdPermission,INTEGER,read-write,,current,sendIdNone(1):sendIdChassis(2):sendIdManage(3):sendIdChassisManage(4),Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdIdPermission object contains the value sendIdDefer. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. DEFVAL { sendIdNone } -.1.3.111.2.802.1.1.8.1.2.4,IEEE8021-CFM-MIB::dot1agCfmDefaultMdTable,,not-accessible,,deprecated,,For each Bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in 22.2.3 in place of this table entry's objects. The agent maintains the value of dot1agCfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2.4.1,IEEE8021-CFM-MIB::dot1agCfmDefaultMdEntry,,not-accessible,dot1agCfmDefaultMdComponentId:dot1agCfmDefaultMdPrimaryVid,deprecated,,The Default MD Level table entry. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2.4.1.1,IEEE8021-CFM-MIB::dot1agCfmDefaultMdComponentId,Unsigned32,not-accessible,,deprecated,,The Bridge component within the system to which the information in this dot1agCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2.4.1.2,IEEE8021-CFM-MIB::dot1agCfmDefaultMdPrimaryVid,Integer32,not-accessible,,deprecated,,The Primary VID of the VLAN to which this entry's objects apply. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2.4.1.3,IEEE8021-CFM-MIB::dot1agCfmDefaultMdStatus,INTEGER,read-only,,deprecated,true(1):false(2),State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.2.4.1.4,IEEE8021-CFM-MIB::dot1agCfmDefaultMdLevel,Integer32,read-write,,deprecated,,A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. If this object has the value -1, the MD Level for MHF creation for this VLAN is controlled by dot1agCfmDefaultMdDefLevel. **NOTE: this object is deprecated due to re-indexing of the table. DEFVAL { -1 } -.1.3.111.2.802.1.1.8.1.2.4.1.5,IEEE8021-CFM-MIB::dot1agCfmDefaultMdMhfCreation,INTEGER,read-write,,deprecated,defMHFnone(1):defMHFdefault(2):defMHFexplicit(3):defMHFdefer(4),A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by dot1agCfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of dot1agCfmDefaultMdStatus is false. **NOTE: this object is deprecated due to re-indexing of the table. DEFVAL { defMHFdefer } -.1.3.111.2.802.1.1.8.1.2.4.1.6,IEEE8021-CFM-MIB::dot1agCfmDefaultMdIdPermission,INTEGER,read-write,,deprecated,sendIdNone(1):sendIdChassis(2):sendIdManage(3):sendIdChassisManage(4):sendIdDefer(5),Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by dot1agCfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of dot1agCfmDefaultMdStatus is false. **NOTE: this object is deprecated due to re-indexing of the table. DEFVAL { sendIdDefer } -.1.3.111.2.802.1.1.8.1.3,IEEE8021-CFM-MIB::dot1agCfmVlan,,,,,, -.1.3.111.2.802.1.1.8.1.3.1,IEEE8021-CFM-MIB::dot1agCfmVlanTable,,not-accessible,,deprecated,,This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the Bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VLAN of that VID. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.3.1.1,IEEE8021-CFM-MIB::dot1agCfmVlanEntry,,not-accessible,dot1agCfmVlanComponentId:dot1agCfmVlanVid,deprecated,,The VLAN table entry. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.3.1.1.1,IEEE8021-CFM-MIB::dot1agCfmVlanComponentId,Unsigned32,not-accessible,,deprecated,,The Bridge component within the system to which the information in this dot1agCfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.3.1.1.2,IEEE8021-CFM-MIB::dot1agCfmVlanVid,Integer32,not-accessible,,deprecated,,This is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.3.1.1.3,IEEE8021-CFM-MIB::dot1agCfmVlanPrimaryVid,Integer32,read-create,,deprecated,,This is the Primary VLAN ID of the VLAN with which this entry's dot1agCfmVlanVid is associated. This value MUST not equal the value of dot1agCfmVlanVid. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.3.1.1.4,IEEE8021-CFM-MIB::dot1agCfmVlanRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.4,IEEE8021-CFM-MIB::dot1agCfmConfigErrorList,,,,,, -.1.3.111.2.802.1.1.8.1.4.1,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListTable,,not-accessible,,deprecated,,The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.4.1.1,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListEntry,,not-accessible,dot1agCfmConfigErrorListVid:dot1agCfmConfigErrorListIfIndex,deprecated,,The Config Error List Table entry **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.4.1.1.1,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListVid,Integer32,not-accessible,,deprecated,,The VLAN ID of the VLAN with interfaces in error. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.4.1.1.2,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListIfIndex,Integer32,not-accessible,,deprecated,,This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in dot1agCfmConfigErrorListTable indexed by that InterfaceIndex value. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.4.1.1.3,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListErrorType,BITS,read-only,,deprecated,cfmLeak(0):conflictingVids(1):excessiveLevels(2):overlappedLevels(3),A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.5,IEEE8021-CFM-MIB::dot1agCfmMd,,,,,, -.1.3.111.2.802.1.1.8.1.5.1,IEEE8021-CFM-MIB::dot1agCfmMdTableNextIndex,Unsigned32,read-only,,current,,This object contains an unused value for dot1agCfmMdIndex in the dot1agCfmMdTable, or a zero to indicate that none exist. -.1.3.111.2.802.1.1.8.1.5.2,IEEE8021-CFM-MIB::dot1agCfmMdTable,,not-accessible,,current,,The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described 3.135 as the network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. -.1.3.111.2.802.1.1.8.1.5.2.1,IEEE8021-CFM-MIB::dot1agCfmMdEntry,,not-accessible,dot1agCfmMdIndex,current,,The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage. -.1.3.111.2.802.1.1.8.1.5.2.1.1,IEEE8021-CFM-MIB::dot1agCfmMdIndex,Unsigned32,not-accessible,,current,,The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID. -.1.3.111.2.802.1.1.8.1.5.2.1.2,IEEE8021-CFM-MIB::dot1agCfmMdFormat,INTEGER,read-create,,current,none(1):dnsLikeName(2):macAddressAndUint(3):charString(4),The type (and thereby format) of the Maintenance Domain Name. DEFVAL { charString } -.1.3.111.2.802.1.1.8.1.5.2.1.3,IEEE8021-CFM-MIB::dot1agCfmMdName,OCTET,read-create,,current,,The Maintenance Domain name. The type/format of this object is determined by the value of the dot1agCfmMdNameType object. Each Maintenance Domain has unique name among all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. 3.140 defines a Maintenance Domain name as the identifier, unique over the domain for which CFM is to protect against accidental concatenation of Service Instances, of a particular Maintenance Domain. DEFVAL { \DEFAULT\ } -.1.3.111.2.802.1.1.8.1.5.2.1.4,IEEE8021-CFM-MIB::dot1agCfmMdMdLevel,Integer32,read-create,,current,,The Maintenance Domain Level. DEFVAL { 0 } -.1.3.111.2.802.1.1.8.1.5.2.1.5,IEEE8021-CFM-MIB::dot1agCfmMdMhfCreation,INTEGER,read-create,,current,defMHFnone(1):defMHFdefault(2):defMHFexplicit(3),Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. DEFVAL { defMHFnone } -.1.3.111.2.802.1.1.8.1.5.2.1.6,IEEE8021-CFM-MIB::dot1agCfmMdMhfIdPermission,INTEGER,read-create,,current,sendIdNone(1):sendIdChassis(2):sendIdManage(3):sendIdChassisManage(4),Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. DEFVAL { sendIdNone } -.1.3.111.2.802.1.1.8.1.5.2.1.7,IEEE8021-CFM-MIB::dot1agCfmMdMaNextIndex,Unsigned32,read-only,,current,,Value to be used as the index of the MA table entries, both the dot1agCfmMaNetTable and the dot1agCfmMaCompTable, for this Maintenance Domain when the management entity wants to create a new row in those tables. -.1.3.111.2.802.1.1.8.1.5.2.1.8,IEEE8021-CFM-MIB::dot1agCfmMdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated. -.1.3.111.2.802.1.1.8.1.6,IEEE8021-CFM-MIB::dot1agCfmMa,,,,,, -.1.3.111.2.802.1.1.8.1.6.1,IEEE8021-CFM-MIB::dot1agCfmMaNetTable,,not-accessible,,current,,The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is constant across all Bridges in a Maintenance Domain, and across all components of a single Bridge. That part of the MA table that can vary from Bridge component to Bridge component is contained in the dot1agCfmMaCompTable. Creation of a Service Instance establishes a connectionless association among the selected DSAPs. Configuring a Maintenance association Endpoint (MEP) at each of the DSAPs creates a Maintenance Association (MA) to monitor that connectionless connectivity. The MA is identified by a Short MA Name that is unique within the Maintenance Domain and chosen to facilitate easy identification of the Service Instance. Together, the Maintenance Domain Name and the Short MA Name form the Maintenance Association Identifier (MAID) that is carried in CFM Messages to identify incorrect connectivity among Service Instances. A small integer, the Maintenance association Endpoint Identifier (MEPID), identifies each MEP among those configured on a single MA (3.132, 18.2). This table uses two indices, first index is the index of the Maintenance Domain table. The second index is the same as the index of the dot1agCfmMaCompEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. -.1.3.111.2.802.1.1.8.1.6.1.1,IEEE8021-CFM-MIB::dot1agCfmMaNetEntry,,not-accessible,dot1agCfmMdIndex:dot1agCfmMaIndex,current,,The MA table entry. -.1.3.111.2.802.1.1.8.1.6.1.1.1,IEEE8021-CFM-MIB::dot1agCfmMaIndex,Unsigned32,not-accessible,,current,,Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. -.1.3.111.2.802.1.1.8.1.6.1.1.2,IEEE8021-CFM-MIB::dot1agCfmMaNetFormat,INTEGER,read-create,,current,primaryVid(1):charString(2):unsignedInt16(3):rfc2865VpnId(4):iccFormat(32),The type (and thereby format) of the Maintenance Association Name. -.1.3.111.2.802.1.1.8.1.6.1.1.3,IEEE8021-CFM-MIB::dot1agCfmMaNetName,OCTET,read-create,,current,,The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name MUST be unique within a maintenance domain. -.1.3.111.2.802.1.1.8.1.6.1.1.4,IEEE8021-CFM-MIB::dot1agCfmMaNetCcmInterval,INTEGER,read-create,,current,intervalInvalid(0):interval300Hz(1):interval10ms(2):interval100ms(3):interval1s(4):interval10s(5):interval1min(6):interval10min(7),Interval between CCM transmissions to be used by all MEPs in the MA. DEFVAL { interval1s } -.1.3.111.2.802.1.1.8.1.6.1.1.5,IEEE8021-CFM-MIB::dot1agCfmMaNetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated. -.1.3.111.2.802.1.1.8.1.6.2,IEEE8021-CFM-MIB::dot1agCfmMaCompTable,,not-accessible,,deprecated,,The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the dot1agCfmMaNetTable. This table uses three indices, first index is the Dot1agCfmPbbComponentIdentifier that identifies the component within the Bridge for which the information in the dot1agCfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the dot1agCfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.2.1,IEEE8021-CFM-MIB::dot1agCfmMaCompEntry,,not-accessible,dot1agCfmMaComponentId:dot1agCfmMdIndex:dot1agCfmMaIndex,deprecated,,The MA table entry. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.2.1.1,IEEE8021-CFM-MIB::dot1agCfmMaComponentId,Unsigned32,not-accessible,,deprecated,,The Bridge component within the system to which the information in this dot1agCfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.2.1.2,IEEE8021-CFM-MIB::dot1agCfmMaCompPrimaryVlanId,Integer32,read-create,,deprecated,,The Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. If the MA is associated with more than one VID, the dot1agCfmVlanTable lists them. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.2.1.3,IEEE8021-CFM-MIB::dot1agCfmMaCompMhfCreation,INTEGER,read-create,,deprecated,defMHFnone(1):defMHFdefault(2):defMHFexplicit(3):defMHFdefer(4),Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. **NOTE: this object is deprecated due to re-indexing of the table. DEFVAL { defMHFdefer } -.1.3.111.2.802.1.1.8.1.6.2.1.4,IEEE8021-CFM-MIB::dot1agCfmMaCompIdPermission,INTEGER,read-create,,deprecated,sendIdNone(1):sendIdChassis(2):sendIdManage(3):sendIdChassisManage(4):sendIdDefer(5),Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. **NOTE: this object is deprecated due to re-indexing of the table. DEFVAL { sendIdDefer } -.1.3.111.2.802.1.1.8.1.6.2.1.5,IEEE8021-CFM-MIB::dot1agCfmMaCompNumberOfVids,Unsigned32,read-create,,deprecated,,The number of VIDs associated with the MA. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.2.1.6,IEEE8021-CFM-MIB::dot1agCfmMaCompRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated. **NOTE: this object is deprecated due to re-indexing of the table. -.1.3.111.2.802.1.1.8.1.6.3,IEEE8021-CFM-MIB::dot1agCfmMaMepListTable,,not-accessible,,current,,List of MEPIDs that belong to this MA. 12.14.6.1.3 specifies that a list of MEPIDs in all Bridges in that MA, but since SNMP SMI does not allow to state in a MIB that an object in a table is an array, the information has to be stored in another table with two indices, being the first index, the index of the table that contains the list or array. For all Bridges in which the same MAID {dot1agCfmMdFormat, dot1agCfmMdName, dot1agCfmMaNetFormat, and dot1agCfmMaNetName} is configured, the same set of dot1agCfmMaMepListIdentifiers MUST be configured in the Bridges' dot1agCfmMaMepListTables. This allows each MEP to determine whether or not it is receiving CCMs from all of the other MEPs in the MA. For example, if one were creating a new MA whose MAID were {charString, 'Dom1', charString, 'MA1'}, that had 2 MEPs, whose MEPIDs were 1 and 3, one could, in Bridge A: 1. Get a new MD index d from dot1agCfmMdTableNextIndex. 2. Create the Maintenance Domain {charString, 'Dom1'}. 3. Get a new MA index a from dot1agCfmMdMaNextIndex [d]. 4. Create the Maintenance Association {charString, 'MA1'}. 5. Create a new dot1agCfmMaMepListEntry for each of the MEPs in the MA: [d, a, 1] and [d, a, 3]. 6. Create one of the new MEPs, say [d, a, 1]. Then, in Bridge B: 7. Do all of these steps 1-6, except for using the other MEPID for the new MEP in Step 6, in this example, MEPID 3. Note that, when creating the MA, MEP List Table, and MEP entries in the second Bridge, the indices 'd' and 'a' identifying the MAID {charString, 'Dom1', charString, 'MA1'} may have different values than those in the first Bridge. -.1.3.111.2.802.1.1.8.1.6.3.1,IEEE8021-CFM-MIB::dot1agCfmMaMepListEntry,,not-accessible,dot1agCfmMdIndex:dot1agCfmMaIndex:dot1agCfmMaMepListIdentifier,current,,The known MEPS table entry. -.1.3.111.2.802.1.1.8.1.6.3.1.1,IEEE8021-CFM-MIB::dot1agCfmMaMepListIdentifier,Unsigned32,not-accessible,,current,,MEPID -.1.3.111.2.802.1.1.8.1.6.3.1.2,IEEE8021-CFM-MIB::dot1agCfmMaMepListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. -.1.3.111.2.802.1.1.8.1.7,IEEE8021-CFM-MIB::dot1agCfmMep,,,,,, -.1.3.111.2.802.1.1.8.1.7.1,IEEE8021-CFM-MIB::dot1agCfmMepTable,,not-accessible,,current,,The Maintenance Association Endpoint (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an endpoint of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (3.132). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it SHOULD transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Wait for dot1agCfmMepTransmitLbmStatus value to be false. To do this do this sequence: a. an SNMP GET for both SnmpSetSerialNo and dot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU). b. Check if value for dot1agCfmMepTransmitLbmStatus is false. - if not, wait x seconds, go to step a above. - if yes, save the value of SnmpSetSerialNo and go to step 2) below 2) Change dot1agCfmMepTransmitLbmStatus value from false to true to ensure no other management entity will use the service. In order to not disturb a possible other NMS do this by sending an SNMP SET for both SnmpSetSerialNo and dot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU, and make sure SNmpSetSerialNo is the first varBind). For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures that two cooperating NMSes will not step on each others toes. Setting this MIB object does not set the corresponding LBIactive state machine variable. 3) Setup the different data to be sent (number of messages, optional TLVs,...), except do not set dot1agCfmMepTransmitLbmMessages. 4) Record the current values of dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu. 6) Set dot1agCfmMepTransmitLbmMessages to a non-zero value to initiate transmission of Loopback messages. The dot1agCfmMepTransmitLbmMessages indicates the number of LBMs to be sent and is not decremented as loopbacks are actually sent. dot1agCfmMepTransmitLbmMessages is not equivalent to the LBMsToSend state machine variable. 7) Check the value of dot1agCfmMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) Monitor the value of dot1agCfmMepTransmitLbmStatus. When it is reset to false, the last LBM has been transmitted. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) Compare dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above. A SET operation to the variable dot1agCfmMepTransmitLtmFlags triggers the transmission of an LTM. Then, the variables dot1agCfmMepTransmitLtmSeqNumber and dot1agCfmMepTransmitLtmEgressIdentifier return the information required to recover the resu -.1.3.111.2.802.1.1.8.1.7.1.1,IEEE8021-CFM-MIB::dot1agCfmMepEntry,,not-accessible,dot1agCfmMdIndex:dot1agCfmMaIndex:dot1agCfmMepIdentifier,current,,The MEP table entry -.1.3.111.2.802.1.1.8.1.7.1.1.1,IEEE8021-CFM-MIB::dot1agCfmMepIdentifier,Unsigned32,not-accessible,,current,,Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID. -.1.3.111.2.802.1.1.8.1.7.1.1.2,IEEE8021-CFM-MIB::dot1agCfmMepIfIndex,Integer32,read-create,,current,,This object is the interface index of the interface either a Bridge Port, or an aggregated IEEE 802.1 link within a Bridge port, to which the MEP is attached. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL set this variable to 0. -.1.3.111.2.802.1.1.8.1.7.1.1.3,IEEE8021-CFM-MIB::dot1agCfmMepDirection,INTEGER,read-create,,current,down(1):up(2),The direction in which the MEP faces on the Bridge port. -.1.3.111.2.802.1.1.8.1.7.1.1.4,IEEE8021-CFM-MIB::dot1agCfmMepPrimaryVid,Unsigned32,read-create,,current,,An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or that the MEP's MA is associated with no VID. DEFVAL { 0 } -.1.3.111.2.802.1.1.8.1.7.1.1.5,IEEE8021-CFM-MIB::dot1agCfmMepActive,INTEGER,read-create,,current,true(1):false(2),Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.6,IEEE8021-CFM-MIB::dot1agCfmMepFngState,INTEGER,read-only,,current,fngReset(1):fngDefect(2):fngReportDefect(3):fngDefectReported(4):fngDefectClearing(5),Current state of the MEP Fault Notification Generator State Machine. DEFVAL { fngReset } -.1.3.111.2.802.1.1.8.1.7.1.1.7,IEEE8021-CFM-MIB::dot1agCfmMepCciEnabled,INTEGER,read-create,,current,true(1):false(2),If set to true, the MEP will generate CCM messages. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.8,IEEE8021-CFM-MIB::dot1agCfmMepCcmLtmPriority,Unsigned32,read-create,,current,,The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the Bridge Port for any of this MEPs VIDs. The management entity can obtain the default value for this variable from the priority regeneration table by extracting the highest priority value in this table on this MEPs Bridge Port. (1 is lowest, then 2, then 0, then 3-7). -.1.3.111.2.802.1.1.8.1.7.1.1.9,IEEE8021-CFM-MIB::dot1agCfmMepMacAddress,OCTET,read-only,,current,,MAC address of the MEP. -.1.3.111.2.802.1.1.8.1.7.1.1.10,IEEE8021-CFM-MIB::dot1agCfmMepLowPrDef,INTEGER,read-create,,current,allDef(1):macRemErrXcon(2):remErrXcon(3):errXcon(4):xcon(5):noXcon(6),An integer value specifying the lowest priority defect that is allowed to generate fault alarm. DEFVAL { macRemErrXcon } -.1.3.111.2.802.1.1.8.1.7.1.1.11,IEEE8021-CFM-MIB::dot1agCfmMepFngAlarmTime,INTEGER,read-create,,current,,The time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime, 20.3.3) (default 2.5s). DEFVAL { 250 } -.1.3.111.2.802.1.1.8.1.7.1.1.12,IEEE8021-CFM-MIB::dot1agCfmMepFngResetTime,INTEGER,read-create,,current,,The time that defects MUST be absent before resetting a Fault Alarm (fngResetTime, 20.35.4) (default 10s). DEFVAL { 1000 } -.1.3.111.2.802.1.1.8.1.7.1.1.13,IEEE8021-CFM-MIB::dot1agCfmMepHighestPrDefect,INTEGER,read-only,,current,none(0):defRDICCM(1):defMACstatus(2):defRemoteCCM(3):defErrorCCM(4):defXconCCM(5),The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. -.1.3.111.2.802.1.1.8.1.7.1.1.14,IEEE8021-CFM-MIB::dot1agCfmMepDefects,BITS,read-only,,current,bDefRDICCM(0):bDefMACstatus(1):bDefRemoteCCM(2):bDefErrorCCM(3):bDefXconCCM(4),A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4) -.1.3.111.2.802.1.1.8.1.7.1.1.15,IEEE8021-CFM-MIB::dot1agCfmMepErrorCcmLastFailure,OCTET,read-only,,current,,The last-received CCM that triggered an DefErrorCCM fault. -.1.3.111.2.802.1.1.8.1.7.1.1.16,IEEE8021-CFM-MIB::dot1agCfmMepXconCcmLastFailure,OCTET,read-only,,current,,The last-received CCM that triggered a DefXconCCM fault. -.1.3.111.2.802.1.1.8.1.7.1.1.17,IEEE8021-CFM-MIB::dot1agCfmMepCcmSequenceErrors,Counter32,read-only,,current,,The total number of out-of-sequence CCMs received from all remote MEPs. -.1.3.111.2.802.1.1.8.1.7.1.1.18,IEEE8021-CFM-MIB::dot1agCfmMepCciSentCcms,Counter32,read-only,,current,,Total number of Continuity Check messages transmitted. -.1.3.111.2.802.1.1.8.1.7.1.1.19,IEEE8021-CFM-MIB::dot1agCfmMepNextLbmTransId,Unsigned32,read-only,,current,,Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. -.1.3.111.2.802.1.1.8.1.7.1.1.20,IEEE8021-CFM-MIB::dot1agCfmMepLbrIn,Counter32,read-only,,current,,Total number of valid, in-order Loopback Replies received. -.1.3.111.2.802.1.1.8.1.7.1.1.21,IEEE8021-CFM-MIB::dot1agCfmMepLbrInOutOfOrder,Counter32,read-only,,current,,The total number of valid, out-of-order Loopback Replies received. -.1.3.111.2.802.1.1.8.1.7.1.1.22,IEEE8021-CFM-MIB::dot1agCfmMepLbrBadMsdu,Counter32,read-only,,current,,The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). -.1.3.111.2.802.1.1.8.1.7.1.1.23,IEEE8021-CFM-MIB::dot1agCfmMepLtmNextSeqNumber,Unsigned32,read-only,,current,,Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. -.1.3.111.2.802.1.1.8.1.7.1.1.24,IEEE8021-CFM-MIB::dot1agCfmMepUnexpLtrIn,Counter32,read-only,,current,,The total number of unexpected LTRs received (20.39.1). -.1.3.111.2.802.1.1.8.1.7.1.1.25,IEEE8021-CFM-MIB::dot1agCfmMepLbrOut,Counter32,read-only,,current,,Total number of Loopback Replies transmitted. -.1.3.111.2.802.1.1.8.1.7.1.1.26,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmStatus,INTEGER,read-create,,current,true(1):false(2),A Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that another LBM is being transmitted. Reset to false by the MEP Loopback Initiator State Machine. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.27,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmDestMacAddress,OCTET,read-create,,current,,The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'false'. -.1.3.111.2.802.1.1.8.1.7.1.1.28,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmDestMepId,Unsigned32,read-create,,current,,The Maintenance association Endpoint Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'true'. -.1.3.111.2.802.1.1.8.1.7.1.1.29,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmDestIsMepId,INTEGER,read-create,,current,true(1):false(2),True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. -.1.3.111.2.802.1.1.8.1.7.1.1.30,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmMessages,Integer32,read-create,,current,,The number of Loopback messages to be transmitted. DEFVAL { 1 } -.1.3.111.2.802.1.1.8.1.7.1.1.31,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmDataTlv,OCTET,read-create,,current,,An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. The intent is to be able to fill the frame carrying the CFM PDU to its maximum length. This may lead to fragmentation in some cases. -.1.3.111.2.802.1.1.8.1.7.1.1.32,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmVlanPriority,Integer32,read-create,,current,,Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. -.1.3.111.2.802.1.1.8.1.7.1.1.33,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmVlanDropEnable,INTEGER,read-create,,current,true(1):false(2),Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, check IEEE Std 802.1ad. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.34,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmResultOK,INTEGER,read-only,,current,true(1):false(2),Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. DEFVAL { true } -.1.3.111.2.802.1.1.8.1.7.1.1.35,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLbmSeqNumber,Unsigned32,read-only,,current,,The Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResultOK is false. -.1.3.111.2.802.1.1.8.1.7.1.1.36,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmStatus,INTEGER,read-create,,current,true(1):false(2),A Boolean flag set to true by the Bridge Port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine. DEFVAL { true } -.1.3.111.2.802.1.1.8.1.7.1.1.37,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmFlags,BITS,read-create,,current,useFDBonly(0),The flags field for LTMs transmitted by the MEP. DEFVAL { { useFDBonly } } -.1.3.111.2.802.1.1.8.1.7.1.1.38,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmTargetMacAddress,OCTET,read-create,,current,,The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'false'. -.1.3.111.2.802.1.1.8.1.7.1.1.39,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmTargetMepId,Unsigned32,read-create,,current,,An indication of the Target MAC Address Field to be transmitted: The Maintenance association Endpoint Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'true'. -.1.3.111.2.802.1.1.8.1.7.1.1.40,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmTargetIsMepId,INTEGER,read-create,,current,true(1):false(2),True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. -.1.3.111.2.802.1.1.8.1.7.1.1.41,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmTtl,Unsigned32,read-create,,current,,The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value returned in the LTR is one less than that received in the LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next hop, and if 0, no LTR is generated. DEFVAL { 64 } -.1.3.111.2.802.1.1.8.1.7.1.1.42,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmResult,INTEGER,read-only,,current,true(1):false(2),Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent DEFVAL { true } -.1.3.111.2.802.1.1.8.1.7.1.1.43,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmSeqNumber,Unsigned32,read-only,,current,,The LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. -.1.3.111.2.802.1.1.8.1.7.1.1.44,IEEE8021-CFM-MIB::dot1agCfmMepTransmitLtmEgressIdentifier,OCTET,read-create,,current,,Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address unique to the system in which the MEP Linktrace Initiator or Linktrace Responder resides. The high-order two octets contain a value sufficient to uniquely identify the MEP Linktrace Initiator or Linktrace Responder within that system. For most Bridges, the address of any MAC attached to the Bridge will suffice for the low-order six octets, and 0 for the high-order octets. In some situations, e.g., if multiple virtual Bridges utilizing emulated LANs are implemented in a single physical system, the high-order two octets can be used to differentiate among the transmitting entities. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. -.1.3.111.2.802.1.1.8.1.7.1.1.45,IEEE8021-CFM-MIB::dot1agCfmMepRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated. -.1.3.111.2.802.1.1.8.1.7.1.1.46,IEEE8021-CFM-MIB::dot1agCfmMepPbbTeCanReportPbbTePresence,INTEGER,read-create,,current,true(1):false(2),A Boolean valued parameter that is set to true if the system has the capability to report the presence of traffic and that the capability is enabled. Traffic presence reporting is an optional PBB-TE feature. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.47,IEEE8021-CFM-MIB::dot1agCfmMepPbbTeTrafficMismatchDefect,INTEGER,read-only,,current,true(1):false(2),A Boolean valued parameter that is set to true if the system has detected a traffic field mismatch defect. Mismatch detection is an optional PBB-TE feature. -.1.3.111.2.802.1.1.8.1.7.1.1.48,IEEE8021-CFM-MIB::dot1agCfmMepPbbTransmitLbmLtmReverseVid,Unsigned32,read-create,,current,,This column specifies the value to use in the Reverse VID value field of PBB-TE MIP TLVs contained within TransmitLTM pdus. -.1.3.111.2.802.1.1.8.1.7.1.1.49,IEEE8021-CFM-MIB::dot1agCfmMepPbbTeMismatchAlarm,INTEGER,read-create,,current,true(1):false(2),A Boolean valued parameter that is set to true if the system is to allow a mismatch defect to generate a fault alarm. DEFVAL { false } -.1.3.111.2.802.1.1.8.1.7.1.1.50,IEEE8021-CFM-MIB::dot1agCfmMepPbbTeLocalMismatchDefect,INTEGER,read-only,,current,true(1):false(2),A Boolean valued parameter that is set to true if the system has detected a local mismatch defect. Mismatch detection is an optional PBB-TE feature. -.1.3.111.2.802.1.1.8.1.7.1.1.51,IEEE8021-CFM-MIB::dot1agCfmMepPbbTeMismatchSinceReset,INTEGER,read-only,,current,true(1):false(2),A Boolean valued parameter indicating if the mismatch defect has been present since the MEP Mismatch Fault Notification Generator was last in the MFNG_RESET state. -.1.3.111.2.802.1.1.8.1.7.2,IEEE8021-CFM-MIB::dot1agCfmLtrTable,,not-accessible,,current,,This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. -.1.3.111.2.802.1.1.8.1.7.2.1,IEEE8021-CFM-MIB::dot1agCfmLtrEntry,,not-accessible,dot1agCfmMdIndex:dot1agCfmMaIndex:dot1agCfmMepIdentifier:dot1agCfmLtrSeqNumber:dot1agCfmLtrReceiveOrder,current,,The Linktrace Reply table entry. -.1.3.111.2.802.1.1.8.1.7.2.1.1,IEEE8021-CFM-MIB::dot1agCfmLtrSeqNumber,Unsigned32,not-accessible,,current,,Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. -.1.3.111.2.802.1.1.8.1.7.2.1.2,IEEE8021-CFM-MIB::dot1agCfmLtrReceiveOrder,Unsigned32,not-accessible,,current,,An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. dot1agCfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. -.1.3.111.2.802.1.1.8.1.7.2.1.3,IEEE8021-CFM-MIB::dot1agCfmLtrTtl,Unsigned32,read-only,,current,,TTL field value for a returned LTR. -.1.3.111.2.802.1.1.8.1.7.2.1.4,IEEE8021-CFM-MIB::dot1agCfmLtrForwarded,INTEGER,read-only,,current,true(1):false(2),Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. -.1.3.111.2.802.1.1.8.1.7.2.1.5,IEEE8021-CFM-MIB::dot1agCfmLtrTerminalMep,INTEGER,read-only,,current,true(1):false(2),A Boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. -.1.3.111.2.802.1.1.8.1.7.2.1.6,IEEE8021-CFM-MIB::dot1agCfmLtrLastEgressIdentifier,OCTET,read-only,,current,,An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. -.1.3.111.2.802.1.1.8.1.7.2.1.7,IEEE8021-CFM-MIB::dot1agCfmLtrNextEgressIdentifier,OCTET,read-only,,current,,An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, i.e., any value can be transmitted, and the field is ignored by the receiver. -.1.3.111.2.802.1.1.8.1.7.2.1.8,IEEE8021-CFM-MIB::dot1agCfmLtrRelay,INTEGER,read-only,,current,rlyHit(1):rlyFdb(2):rlyMpdb(3),Value returned in the Relay Action field. -.1.3.111.2.802.1.1.8.1.7.2.1.9,IEEE8021-CFM-MIB::dot1agCfmLtrChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the dot1agCfmLtrChassisId has a length of 0. -.1.3.111.2.802.1.1.8.1.7.2.1.10,IEEE8021-CFM-MIB::dot1agCfmLtrChassisId,OCTET,read-only,,current,,The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. -.1.3.111.2.802.1.1.8.1.7.2.1.11,IEEE8021-CFM-MIB::dot1agCfmLtrManAddressDomain,OBJECT,read-only,,current,,The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the LTR. Received in the LTR Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. -.1.3.111.2.802.1.1.8.1.7.2.1.12,IEEE8021-CFM-MIB::dot1agCfmLtrManAddress,OCTET,read-only,,current,,The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object dot1agCfmLtrManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmLtrManAddress MUST have a zero-length OCTET STRING as a value. -.1.3.111.2.802.1.1.8.1.7.2.1.13,IEEE8021-CFM-MIB::dot1agCfmLtrIngress,INTEGER,read-only,,current,ingNoTlv(0):ingOk(1):ingDown(2):ingBlocked(3):ingVid(4),The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM. -.1.3.111.2.802.1.1.8.1.7.2.1.14,IEEE8021-CFM-MIB::dot1agCfmLtrIngressMac,OCTET,read-only,,current,,MAC address returned in the ingress MAC address field. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.15,IEEE8021-CFM-MIB::dot1agCfmLtrIngressPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),Format of the Ingress Port ID. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.16,IEEE8021-CFM-MIB::dot1agCfmLtrIngressPortId,OCTET,read-only,,current,,Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.17,IEEE8021-CFM-MIB::dot1agCfmLtrEgress,INTEGER,read-only,,current,egrNoTlv(0):egrOK(1):egrDown(2):egrBlocked(3):egrVid(4),The value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM. -.1.3.111.2.802.1.1.8.1.7.2.1.18,IEEE8021-CFM-MIB::dot1agCfmLtrEgressMac,OCTET,read-only,,current,,MAC address returned in the egress MAC address field. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.19,IEEE8021-CFM-MIB::dot1agCfmLtrEgressPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),Format of the egress Port ID. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.20,IEEE8021-CFM-MIB::dot1agCfmLtrEgressPortId,OCTET,read-only,,current,,Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. -.1.3.111.2.802.1.1.8.1.7.2.1.21,IEEE8021-CFM-MIB::dot1agCfmLtrOrganizationSpecificTlv,OCTET,read-only,,current,,All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. -.1.3.111.2.802.1.1.8.1.7.3,IEEE8021-CFM-MIB::dot1agCfmMepDbTable,,not-accessible,,current,,The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. -.1.3.111.2.802.1.1.8.1.7.3.1,IEEE8021-CFM-MIB::dot1agCfmMepDbEntry,,not-accessible,dot1agCfmMdIndex:dot1agCfmMaIndex:dot1agCfmMepIdentifier:dot1agCfmMepDbRMepIdentifier,current,,The MEP Database table entry. -.1.3.111.2.802.1.1.8.1.7.3.1.1,IEEE8021-CFM-MIB::dot1agCfmMepDbRMepIdentifier,Unsigned32,not-accessible,,current,,Maintenance association Endpoint Identifier of a remote MEP whose information from the MEP Database is to be returned. -.1.3.111.2.802.1.1.8.1.7.3.1.2,IEEE8021-CFM-MIB::dot1agCfmMepDbRMepState,INTEGER,read-only,,current,rMepIdle(1):rMepStart(2):rMepFailed(3):rMepOk(4),The operational state of the remote MEP IFF State machines. -.1.3.111.2.802.1.1.8.1.7.3.1.3,IEEE8021-CFM-MIB::dot1agCfmMepDbRMepFailedOkTime,TimeTicks,read-only,,current,,The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. -.1.3.111.2.802.1.1.8.1.7.3.1.4,IEEE8021-CFM-MIB::dot1agCfmMepDbMacAddress,OCTET,read-only,,current,,The MAC address of the remote MEP. -.1.3.111.2.802.1.1.8.1.7.3.1.5,IEEE8021-CFM-MIB::dot1agCfmMepDbRdi,INTEGER,read-only,,current,true(1):false(2),State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. -.1.3.111.2.802.1.1.8.1.7.3.1.6,IEEE8021-CFM-MIB::dot1agCfmMepDbPortStatusTlv,INTEGER,read-only,,current,psNoPortStateTLV(0):psBlocked(1):psUp(2),An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. DEFVAL { psNoPortStateTLV } -.1.3.111.2.802.1.1.8.1.7.3.1.7,IEEE8021-CFM-MIB::dot1agCfmMepDbInterfaceStatusTlv,INTEGER,read-only,,current,isNoInterfaceStatusTLV(0):isUp(1):isDown(2):isTesting(3):isUnknown(4):isDormant(5):isNotPresent(6):isLowerLayerDown(7),An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. DEFVAL { isNoInterfaceStatusTLV } -.1.3.111.2.802.1.1.8.1.7.3.1.8,IEEE8021-CFM-MIB::dot1agCfmMepDbChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),This object specifies the format of the Chassis ID received in the last CCM. -.1.3.111.2.802.1.1.8.1.7.3.1.9,IEEE8021-CFM-MIB::dot1agCfmMepDbChassisId,OCTET,read-only,,current,,The Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. -.1.3.111.2.802.1.1.8.1.7.3.1.10,IEEE8021-CFM-MIB::dot1agCfmMepDbManAddressDomain,OBJECT,read-only,,current,,The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. -.1.3.111.2.802.1.1.8.1.7.3.1.11,IEEE8021-CFM-MIB::dot1agCfmMepDbManAddress,OCTET,read-only,,current,,The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object dot1agCfmMepDbManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. -.1.3.111.2.802.1.1.8.1.7.3.1.12,IEEE8021-CFM-MIB::dot1agCfmMepDbRMepIsActive,INTEGER,read-write,,current,true(1):false(2),A Boolean value stating if the remote MEP is active. -.1.3.111.2.802.1.1.8.2,IEEE8021-CFM-MIB::dot1agCfmConformance,,,,,, -.1.3.111.2.802.1.1.8.2.1,IEEE8021-CFM-MIB::dot1agCfmCompliances,,,,,, -.1.3.111.2.802.1.1.8.2.1.1,IEEE8021-CFM-MIB::dot1agCfmCompliance,,,,,,The compliance statement for support of the CFM MIB module. -.1.3.111.2.802.1.1.8.2.2,IEEE8021-CFM-MIB::dot1agCfmGroups,,,,,, -.1.3.111.2.802.1.1.8.2.2.1,IEEE8021-CFM-MIB::dot1agCfmStackGroup,,,,,,Objects for the Stack group. -.1.3.111.2.802.1.1.8.2.2.2,IEEE8021-CFM-MIB::dot1agCfmDefaultMdGroup,,,,,,Objects for the Default MD Level group. -.1.3.111.2.802.1.1.8.2.2.3,IEEE8021-CFM-MIB::dot1agCfmVlanIdGroup,,,,,,Objects for the VLAN ID group. -.1.3.111.2.802.1.1.8.2.2.4,IEEE8021-CFM-MIB::dot1agCfmConfigErrorListGroup,,,,,,Objects for the CFM Configuration Error List Group. -.1.3.111.2.802.1.1.8.2.2.5,IEEE8021-CFM-MIB::dot1agCfmMdGroup,,,,,,Objects for the Maintenance Domain Group. -.1.3.111.2.802.1.1.8.2.2.6,IEEE8021-CFM-MIB::dot1agCfmMaGroup,,,,,,Objects for the MA group. -.1.3.111.2.802.1.1.8.2.2.7,IEEE8021-CFM-MIB::dot1agCfmMepGroup,,,,,,Objects for the MEP group. -.1.3.111.2.802.1.1.8.2.2.8,IEEE8021-CFM-MIB::dot1agCfmMepDbGroup,,,,,,Objects for the MEP group. -.1.3.111.2.802.1.1.8.2.2.9,IEEE8021-CFM-MIB::dot1agCfmNotificationsGroup,,,,,,Objects for the Notifications group. -.1.3.111.2.802.1.1.8.2.2.10,IEEE8021-CFM-MIB::ieee8021CfmMaNetGroup,,,,,,Objects for the MA Net group. -.1.3.111.2.802.1.1.8.2.2.11,IEEE8021-CFM-MIB::ieee8021CfmDefaultMdDefGroup,,,,,,Objects for the Default MD default Level group. -.1.3.111.2.802.1.1.8.2.2.12,IEEE8021-CFM-MIB::ieee8021CfmPbbTeExtensionGroup,,,,,,Objects needed for systems that support PBB-TE CFM functionality. -.1.3.111.2.802.1.1.8.2.2.13,IEEE8021-CFM-MIB::ieee8021CfmPbbTeTrafficBitGroup,,,,,,Objects needed for PBB-TE supporting systems that support the optional traffic bit. diff --git a/foundry/BROCADE-ENTITY-OID-MIB b/foundry/BROCADE-ENTITY-OID-MIB index e8d9ba1ac..3f0e6dd51 100644 --- a/foundry/BROCADE-ENTITY-OID-MIB +++ b/foundry/BROCADE-ENTITY-OID-MIB @@ -6,30 +6,30 @@ IMPORTS FROM FOUNDRY-SN-ROOT-MIB; -- [snrootu] brcdEntityOIDMIB MODULE-IDENTITY - LAST-UPDATED "201302060930Z" -- Feb 06, 2013 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" DESCRIPTION "This module defines the object identifiers (OIDs) for various - physical components on Brocade products. These OIDs are + physical components on Ruckus Wireless products. These OIDs are used for representing entPhysicalVendorType in Entity MIB's entPhysicalTable (RFC 4133). - Copyright 1996-2012 Brocade Communications Systems, Inc. + Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. - This Brocade Communications Systems SNMP Management Information - Base Specification embodies Brocade Communications Systems + This Ruckus Wireless, Inc SNMP Management Information + Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. - Brocade Communications Systems retains all title and ownership + Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. - This Specification is supplied AS IS, and Brocade Communications + This Specification is supplied AS IS, and Ruckus Wireless, Inc Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." @@ -37,10 +37,13 @@ brcdEntityOIDMIB MODULE-IDENTITY REVISION "201302060930Z" -- Feb 06, 2013 DESCRIPTION "Initial version" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" ::= { products 17 } --- Brocade Entity OID MIB Objects +-- Ruckus Wireless Entity OID MIB Objects brcdEntityOIDMIBObjects OBJECT IDENTIFIER ::= { brcdEntityOIDMIB 1 } -- The OIDs in this MIB are structured per the following PhysicalClass @@ -111,7 +114,76 @@ brcdEntityOIDChassisMLXe4 OBJECT IDENTIFIER ::= { brcdEnt brcdEntityOIDChassisMLXe8 OBJECT IDENTIFIER ::= { brcdEntityOIDChassisMLXeFamily 2 } -- NetIron MLXe-8 family brcdEntityOIDChassisMLXe16 OBJECT IDENTIFIER ::= { brcdEntityOIDChassisMLXeFamily 3 } -- NetIron MLXe-16 family brcdEntityOIDChassisMLXe32 OBJECT IDENTIFIER ::= { brcdEntityOIDChassisMLXeFamily 4 } -- NetIron MLXe-32 family - +--FI related chassis information +brcdEntityOIDChassisICX7250Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 7 } --FastIron ICX7250 family +brcdEntityOIDChassisICX725024 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7250Family 1 } +brcdEntityOIDChassisICX725024HPOE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7250Family 2 } +brcdEntityOIDChassisICX725024G OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7250Family 3 } +brcdEntityOIDChassisICX725048 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7250Family 4} +brcdEntityOIDChassisICX725048HPOE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7250Family 5 } +brcdEntityOIDChassisICX7450Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 8 } --FastIron ICX7450 family +brcdEntityOIDChassisICX745024 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 1 } +brcdEntityOIDChassisICX745024HPOE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 2 } +brcdEntityOIDChassisICX745032ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 3 } +brcdEntityOIDChassisICX745048 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 4} +brcdEntityOIDChassisICX745048HPOE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 5 } +brcdEntityOIDChassisICX745048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7450Family 6 } +brcdEntityOIDChassisICX7750Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 9 } --FastIron ICX7750 family +brcdEntityOIDChassisICX775048C OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7750Family 1 } +brcdEntityOIDChassisICX775048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7750Family 2 } +brcdEntityOIDChassisICX775026Q OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7750Family 3 } +--minion/gru/frozone related chassis information +brcdEntityOIDChassisICX7150Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 10 } --FastIron ICX7150 family +brcdEntityOIDChassisICX715024 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 1 } +brcdEntityOIDChassisICX715024POE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 2 } +brcdEntityOIDChassisICX715048 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 3 } +brcdEntityOIDChassisICX715048POE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 4} +brcdEntityOIDChassisICX715048POEF OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 5 } +brcdEntityOIDChassisICX7150C12POE OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 6} +brcdEntityOIDChassisICX715048ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 7} +brcdEntityOIDChassisICX715024F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 8} +brcdEntityOIDChassisICX7150C10ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 9} +brcdEntityOIDChassisICX7150C08P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 10} +brcdEntityOIDChassisICX7150C08PT OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7150Family 11} +--tanto related chassis information +brcdEntityOIDChassisICX7650Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 11 } --FastIron ICX7650 family +brcdEntityOIDChassisICX765048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7650Family 1 } +brcdEntityOIDChassisICX765048P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7650Family 2 } +brcdEntityOIDChassisICX765048ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7650Family 3 } +--megamind related chassis information +brcdEntityOIDChassisICX7850Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 12 } --FastIron ICX7850 family +brcdEntityOIDChassisICX785032Q OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7850Family 1 } +brcdEntityOIDChassisICX785048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7850Family 2 } +brcdEntityOIDChassisICX785048FS OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7850Family 3 } +brcdEntityOIDChassisICX785048C OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7850Family 4 } +--godzilla related chassis information +brcdEntityOIDChassisICX7550Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 13 } --FastIron ICX7550 family +brcdEntityOIDChassisICX755024 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 1 } +brcdEntityOIDChassisICX755024F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 2 } +brcdEntityOIDChassisICX755024P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 3 } +brcdEntityOIDChassisICX755024ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 4 } +brcdEntityOIDChassisICX755048 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 5 } +brcdEntityOIDChassisICX755048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 6 } +brcdEntityOIDChassisICX755048P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 7 } +brcdEntityOIDChassisICX755048ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX7550Family 8 } +--Rodan related chassis information +brcdEntityOIDChassisICX8200Family OBJECT IDENTIFIER ::= { brcdEntityOIDChassis 14 } --FastIron ICX8200 family +brcdEntityOIDChassisICX820024 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 1 } +brcdEntityOIDChassisICX820024F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 2 } +brcdEntityOIDChassisICX820024FX OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 3 } +brcdEntityOIDChassisICX820024P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 4 } +brcdEntityOIDChassisICX820024ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 5 } +brcdEntityOIDChassisICX820048 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 6 } +brcdEntityOIDChassisICX820048F OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 7 } +brcdEntityOIDChassisICX820048P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 8 } +brcdEntityOIDChassisICX820048PF OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 9 } +brcdEntityOIDChassisICX820048PF2 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 10} +brcdEntityOIDChassisICX820048ZP2 OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 11} +brcdEntityOIDChassisICX8200C08P OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 12} +brcdEntityOIDChassisICX8200C08PF OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 13} +brcdEntityOIDChassisICX8200C08PT OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 14} +brcdEntityOIDChassisICX8200C08PDC OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 15} +brcdEntityOIDChassisICX8200C08ZP OBJECT IDENTIFIER ::= {brcdEntityOIDChassisICX8200Family 16} -- Backplane OID assignments brcdEntityOIDBackplane OBJECT IDENTIFIER ::= { brcdEntityOIDMIBObjects 4 } @@ -153,6 +225,12 @@ brcdEntityOIDPowerSupplyDC2400W OBJECT IDENTIFIER ::= { brcdEntit brcdEntityOIDPowerSupplyAC3000W OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 14 } -- 32-slot NetIron MLXe/XMR/MLX AC 3000W power supply brcdEntityOIDPowerSupplyDC3000W OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 15 } -- 32-slot NetIron MLXe/XMR/MLX DC 3000W power supply +--FI power supply OID assignment +brcdEntityOIDPowerSupplyACPOE OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 16 } -- AC POE Power Supply +brcdEntityOIDPowerSupplyACRegular OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 17 } -- AC Regular Power Supply +brcdEntityOIDPowerSupplyDCPOE OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 18 } -- DC Power Supply +brcdEntityOIDPowerSupplyDCRegular OBJECT IDENTIFIER ::= { brcdEntityOIDPowerSupply 19 } -- DC Power Supply + -- Fan OID assignments brcdEntityOIDFan OBJECT IDENTIFIER ::= { brcdEntityOIDMIBObjects 7 } brcdEntityOIDFanUnknown OBJECT IDENTIFIER ::= { brcdEntityOIDFan 1 } @@ -174,15 +252,85 @@ brcdEntityOIDModuleUnknown OBJECT IDENTIFIER ::= { brcdEntityOIDM brcdEntityOIDModuleMgmt OBJECT IDENTIFIER ::= { brcdEntityOIDModule 2 } brcdEntityOIDModuleMgmtUnknown OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmt 1 } brcdEntityOIDModuleMgmtNetIronFamily OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmt 2 } -brcdEntityOIDModuleMgmtNiMlxMr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 1 } -- NI-MLX-MR: Brocade MLXe and Brocade MLX management module -brcdEntityOIDModuleMgmtNiMlx32Mr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 2 } -- NI-MLX-32-MR: Brocade MLXe-32 and Brocade MLX-32 management module -brcdEntityOIDModuleMgmtNiXmrMr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 3 } -- NI-XMR-MR: Brocade NetIron XMR management module -brcdEntityOIDModuleMgmtNiXmr32Mr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 4 } -- NI-XMR-32-MR: Brocade NetIron XMR 32000 management module +brcdEntityOIDModuleMgmtNiMlxMr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 1 } -- NI-MLX-MR: Ruckus Wireless MLXe and Ruckus Wireless MLX management module +brcdEntityOIDModuleMgmtNiMlx32Mr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 2 } -- NI-MLX-32-MR: Ruckus Wireless MLXe-32 and Ruckus Wireless MLX-32 management module +brcdEntityOIDModuleMgmtNiXmrMr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 3 } -- NI-XMR-MR: Ruckus Wireless NetIron XMR management module +brcdEntityOIDModuleMgmtNiXmr32Mr OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtNetIronFamily 4 } -- NI-XMR-32-MR: Ruckus Wireless NetIron XMR 32000 management module brcdEntityOIDModuleMgmtMlxFamily OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 3 } brcdEntityOIDModuleMgmtBrMlxMr2M OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtMlxFamily 1 } -- BR-MLX-MR2-M: MLXe/MLX Gen2 management (M) module for 4-, 8- and 16-slot systems brcdEntityOIDModuleMgmtBrMlxMr2X OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtMlxFamily 2 } -- BR-MLX-MR2-X: MLXe/XMR Gen2 management (X) module for 4-, 8- and 16-slot systems brcdEntityOIDModuleMgmtBrMlx32Mr2M OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtMlxFamily 3 } -- BR-MLX-32-MR2-M: MLXe/MLX Gen2 management (M) module for 32-slot systems brcdEntityOIDModuleMgmtBrMlx32Mr2X OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtMlxFamily 4 } -- BR-MLX-32-MR2-X: MLXe/XMR Gen2 management (X) module for 32-slot systems +--FI management module OID assignment +brcdEntityOIDModuleMgmtIcx7250Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 4 } +brcdEntityOIDModuleMgmtIcx7250624BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7250Family 1 } +brcdEntityOIDModuleMgmtIcx7250648BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7250Family 2 } +brcdEntityOIDModuleMgmtIcx7250624GBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7250Family 3 } +brcdEntityOIDModuleMgmtIcx7250624PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7250Family 4 } +brcdEntityOIDModuleMgmtIcx7250648PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7250Family 5 } +brcdEntityOIDModuleMgmtIcx7450Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 5} +brcdEntityOIDModuleMgmtIcx7450624BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 1 } +brcdEntityOIDModuleMgmtIcx7450648BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 2 } +brcdEntityOIDModuleMgmtIcx7450648FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 3 } +brcdEntityOIDModuleMgmtIcx7450624PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 4 } +brcdEntityOIDModuleMgmtIcx7450648PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 5 } +brcdEntityOIDModuleMgmtIcx7450632ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7450Family 6 } +brcdEntityOIDModuleMgmtIcx7750Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 6} +brcdEntityOIDModuleMgmtIcx775048CBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7750Family 1 } +brcdEntityOIDModuleMgmtIcx775048FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7750Family 2 } +brcdEntityOIDModuleMgmtIcx775026QBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7750Family 3 } +brcdEntityOIDModuleMgmtIcx775020QBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7750Family 4 } +--minion/gru/frozone management modules +brcdEntityOIDModuleMgmtIcx7150Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 7 } +brcdEntityOIDModuleMgmtIcx7150624BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 1 } +brcdEntityOIDModuleMgmtIcx7150648BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 2 } +brcdEntityOIDModuleMgmtIcx7150624PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 3 } +brcdEntityOIDModuleMgmtIcx7150648PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 4 } +brcdEntityOIDModuleMgmtIcx7150648PoeFBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 5 } +brcdEntityOIDModuleMgmtIcx7150612CPoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 6 } +brcdEntityOIDModuleMgmtIcx7150648ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 7 } +brcdEntityOIDModuleMgmtIcx7150624FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 8 } +brcdEntityOIDModuleMgmtIcx7150C10ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 9 } +brcdEntityOIDModuleMgmtIcx7150C08PBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7150Family 10 } +brcdEntityOIDModuleMgmtIcx7150C08PTBaseModule OBJECT IDENTIFIER ::= {brcdEntityOIDModuleMgmtIcx7150Family 11} +--tanto managment modules +brcdEntityOIDModuleMgmtIcx7650Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 8 } +brcdEntityOIDModuleMgmtIcx7650648FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7650Family 1 } +brcdEntityOIDModuleMgmtIcx7650648PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7650Family 2 } +brcdEntityOIDModuleMgmtIcx7650648ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7650Family 3 } +--megamind managment modules +brcdEntityOIDModuleMgmtIcx7850Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 9 } +brcdEntityOIDModuleMgmtIcx7850632QBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7850Family 1 } +brcdEntityOIDModuleMgmtIcx7850648FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7850Family 2 } +brcdEntityOIDModuleMgmtIcx7850648FSBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7850Family 3 } +--godzilla managment modules +brcdEntityOIDModuleMgmtIcx7550Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 10 } +brcdEntityOIDModuleMgmtIcx7550624BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 1 } +brcdEntityOIDModuleMgmtIcx7550648BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 2 } +brcdEntityOIDModuleMgmtIcx7550624FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 3 } +brcdEntityOIDModuleMgmtIcx7550648FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 4 } +brcdEntityOIDModuleMgmtIcx7550624PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 5 } +brcdEntityOIDModuleMgmtIcx7550648PoeBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 6 } +brcdEntityOIDModuleMgmtIcx7550624ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 7 } +brcdEntityOIDModuleMgmtIcx7550648ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx7550Family 8 } +--Rodan managment modules +brcdEntityOIDModuleMgmtIcx8200Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmt 11 } +brcdEntityOIDModuleMgmtIcx8200624BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 1 } +brcdEntityOIDModuleMgmtIcx8200624FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 2 } +brcdEntityOIDModuleMgmtIcx8200624FXBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 3 } +brcdEntityOIDModuleMgmtIcx8200624PBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 4 } +brcdEntityOIDModuleMgmtIcx8200624ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 5 } +brcdEntityOIDModuleMgmtIcx8200648BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 6 } +brcdEntityOIDModuleMgmtIcx8200648FBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 7 } +brcdEntityOIDModuleMgmtIcx8200648PBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 8 } +brcdEntityOIDModuleMgmtIcx8200648PFBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 9 } +brcdEntityOIDModuleMgmtIcx8200648PF2BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 10} +brcdEntityOIDModuleMgmtIcx8200648ZP2BaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 11} +brcdEntityOIDModuleMgmtIcx82006C08PBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 12} +brcdEntityOIDModuleMgmtIcx82006C08PDCBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 13} +brcdEntityOIDModuleMgmtIcx82006C08PFBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 14} +brcdEntityOIDModuleMgmtIcx82006C08PTBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 15} +brcdEntityOIDModuleMgmtIcx82006C08ZPBaseModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleMgmtIcx8200Family 16} -- Switch Fabric Modules brcdEntityOIDModuleSfm OBJECT IDENTIFIER ::= { brcdEntityOIDModule 3 } @@ -208,8 +356,8 @@ brcdEntityOIDModuleIntfNiMlx10Gx2 OBJECT IDENTIFIER ::= {brcdEn brcdEntityOIDModuleIntfNiXmr10Gx2 OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 7 } -- NI-XMR-10GX2: Gen-1 2-port 10-Gbps Ethernet module brcdEntityOIDModuleIntfNiMlx10Gx4 OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 8 } -- NI-MLX-10GX4: NetIron MLX Series 4-port 10-GbE module with IPv4/IPv6/MPLS hardware support brcdEntityOIDModuleIntfNiXmr10Gx4 OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 9 } -- NI-XMR-10Gx4: NetIron XMR Series 4-port 10-GbE module with IPv4/IPv6/MPLS hardware support -brcdEntityOIDModuleIntfNiMlx10Gx8D OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 10 } -- NI-MLX-10GX8-D: Brocade MLX Series 8-port 10-GbE (D) module with IPv4/IPv6 hardware support -brcdEntityOIDModuleIntfNiMlx10Gx8M OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 11 } -- NI-MLX-10GX8-M: Brocade MLX Series 8-port 10-GbE (M) module with IPv4/IPv6/MPLS hardware support +brcdEntityOIDModuleIntfNiMlx10Gx8D OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 10 } -- NI-MLX-10GX8-D: Ruckus Wireless MLX Series 8-port 10-GbE (D) module with IPv4/IPv6 hardware support +brcdEntityOIDModuleIntfNiMlx10Gx8M OBJECT IDENTIFIER ::= {brcdEntityOIDModuleIntfNetIronFamily 11 } -- NI-MLX-10GX8-M: Ruckus Wireless MLX Series 8-port 10-GbE (M) module with IPv4/IPv6/MPLS hardware support brcdEntityOIDModuleIntfMlxFamily OBJECT IDENTIFIER ::= { brcdEntityOIDModuleIntf 3 } brcdEntityOIDModuleIntfBrMlx1Gcx24X OBJECT IDENTIFIER ::= { brcdEntityOIDModuleIntfMlxFamily 1 } -- BR-MLX-1GCX24-X: XMR/MLXE 24-port 1-GbE (X) Copper (RJ-45) Module with IPv4/IPv6/MPLS hardware support brcdEntityOIDModuleIntfBrMlx1Gcx24xMl OBJECT IDENTIFIER ::= { brcdEntityOIDModuleIntfMlxFamily 2 } -- BR-MLX-1GCX24-X-ML: MLX/MLXE 24-port 1-GbE (ML) Copper (RJ-45) Module with IPv4/IPv6/MPLS hardware support @@ -236,9 +384,58 @@ brcdEntityOIDModuleOpticsXFP OBJECT IDENTIFIER ::= { brcdEntityO brcdEntityOIDModuleOpticsCFP OBJECT IDENTIFIER ::= { brcdEntityOIDModuleOptics 5 } brcdEntityOIDModuleOpticsQSFPP OBJECT IDENTIFIER ::= { brcdEntityOIDModuleOptics 6 } brcdEntityOIDModuleOpticsCFP2 OBJECT IDENTIFIER ::= { brcdEntityOIDModuleOptics 7 } - - --- Port OID assignments +--For FI new optics is added +brcdEntityOIDModuleOpticsGBIC OBJECT IDENTIFIER ::= { brcdEntityOIDModuleOptics 8 } + +-- Service modules +brcdEntityOIDModuleService OBJECT IDENTIFIER ::= { brcdEntityOIDModule 6 } +brcdEntityOIDModuleServiceUnknown OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 1 } +brcdEntityOIDModuleServiceIcx7250Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 2} +brcdEntityOIDModuleServiceIcx7250sfpplus8Port80gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7250Family 1 } +brcdEntityOIDModuleServiceIcx7250sfpplus4Port4gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7250Family 2} +brcdEntityOIDModuleServiceIcx7450Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 3} +brcdEntityOIDModuleServiceIcx7400sfpplus4Port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7450Family 1 } +brcdEntityOIDModuleServiceIcx7400copper4Port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7450Family 2 } +brcdEntityOIDModuleServiceIcx7400sfp4Port4gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7450Family 3 } +brcdEntityOIDModuleServiceIcx7400qsfpplus1Port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7450Family 4 } +brcdEntityOIDModuleServiceIcx7400ServiceModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7450Family 5 } +brcdEntityOIDModuleServiceIcx7750Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 4} +brcdEntityOIDModuleServiceIcx7750QSFP6port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7750Family 1 } +brcdEntityOIDModuleServiceIcx77506Q6port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7750Family 2 } +--minion/gru service modules +brcdEntityOIDModuleServiceIcx7150Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 5} +brcdEntityOIDModuleServiceIcx7150sfpplus2Port20gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 1 } +brcdEntityOIDModuleServiceIcx7150sfpplus4Port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 2} +brcdEntityOIDModuleServiceIcx7150gc2Port2gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 3} +brcdEntityOIDModuleServiceIcx7150sfpplus8Port80gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 4} +brcdEntityOIDModuleServiceIcx7150gsfp2Port2gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 5} +brcdEntityOIDModuleServiceIcx7150gc2Port20gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7150Family 6} +--tanto service modules +brcdEntityOIDModuleServiceIcx7650Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 6} +brcdEntityOIDModuleServiceIcx7600xgf4Port40gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 1} --modfied module name change +brcdEntityOIDModuleServiceIcx7600qsfp2port80gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 2 } --//modfied module name change +brcdEntityOIDModuleServiceIcx7600100g1port100gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 3 }--//modfied module name change +brcdEntityOIDModuleServiceIcx7650qsfp4port160gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 4 } +brcdEntityOIDModuleServiceIcx7650100g2port200gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 5 } +brcdEntityOIDModuleServiceIcx7650qsfp2port80gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7650Family 6 } +--megamind service modules +brcdEntityOIDModuleServiceIcx7850Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 7} +brcdEntityOIDModuleServiceIcx78508port800gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7850Family 1 } +brcdEntityOIDModuleServiceIcx785012port1200gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7850Family 2 } +--godzilla service modules +brcdEntityOIDModuleServiceIcx7550Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 8} +brcdEntityOIDModuleServiceIcx75502port80gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7550Family 1 } +brcdEntityOIDModuleServiceIcx75502port200gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx7550Family 2 } +--Rodan service modules +brcdEntityOIDModuleServiceIcx8200Family OBJECT IDENTIFIER ::= { brcdEntityOIDModuleService 9} +brcdEntityOIDModuleServiceIcx82004Port100gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 1 } +brcdEntityOIDModuleServiceIcx82008Port200gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 2 } +brcdEntityOIDModuleServiceIcx82002Port2gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 3 } +brcdEntityOIDModuleServiceIcx82002Port20gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 4 } +brcdEntityOIDModuleServiceIcx82002Port50gModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 5 } +brcdEntityOIDModuleServiceIcx82002Port20gcfModule OBJECT IDENTIFIER ::= { brcdEntityOIDModuleServiceIcx8200Family 6 } + +-- Port OID assignments brcdEntityOIDPort OBJECT IDENTIFIER ::= { brcdEntityOIDMIBObjects 10 } brcdEntityOIDPortUnknown OBJECT IDENTIFIER ::= { brcdEntityOIDPort 1 } brcdEntityOIDPortMgmtSerial OBJECT IDENTIFIER ::= { brcdEntityOIDPort 2 } -- Console port @@ -251,13 +448,31 @@ brcdEntityOIDPort10GigBaseFx OBJECT IDENTIFIER ::= { brcdEntityO brcdEntityOIDPort40GigBaseFx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 9 } -- 40 Gigabit Ethernet - Fiber brcdEntityOIDPort100GigBaseFx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 10 } -- 100 Gigabit Ethernet - Fiber brcdEntityOIDPort10GigBaseTx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 11 } -- 10 Gigabit Ethernet - Copper - - +--FI port OIDs +brcdEntityOIDPort25GigBaseTx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 12 } -- 25 Gigabit Ethernet +brcdEntityOIDPort40GigBaseTx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 13 } -- 40 Gigabit Ethernet - Copper +brcdEntityOIDPort2500BaseTx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 14 } -- 2.5 Gigabit Ethernet +brcdEntityOIDPort5GigBaseTx OBJECT IDENTIFIER ::= { brcdEntityOIDPort 15 } -- 5 Gigabit Ethernet -- Stack OID assignments -- e.g., stack of multiple chassis entities brcdEntityOIDStack OBJECT IDENTIFIER ::= { brcdEntityOIDMIBObjects 11 } brcdEntityOIDStackUnknown OBJECT IDENTIFIER ::= { brcdEntityOIDStack 1 } - +brcdEntityOIDStackICXStackFamily OBJECT IDENTIFIER ::= { brcdEntityOIDStack 2 } +brcdEntityOIDStackICXStackIcx7250 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 1 } +brcdEntityOIDStackICXStackIcx7450 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 2 } +brcdEntityOIDStackICXStackIcx7750 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 3 } +--minion/gru stack OID's +brcdEntityOIDStackICXStackIcx7150 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 4 } +--tanto stack OID's +brcdEntityOIDStackICXStackIcx7650 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 5 } +--megamind stack OID's +brcdEntityOIDStackICXStackIcx7850 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 6 } +brcdEntityOIDStackICXSPXFamily OBJECT IDENTIFIER ::= { brcdEntityOIDStack 3} -- reserve for SPX later +brcdEntityOIDStackICXSPX OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXSPXFamily 1 } +--godzilla stack OID's +brcdEntityOIDStackICXStackIcx7550 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 7 } +--Rodan stack OID's +brcdEntityOIDStackICXStackIcx8200 OBJECT IDENTIFIER ::= { brcdEntityOIDStackICXStackFamily 8 } -- CPU OID assignments brcdEntityOIDCpu OBJECT IDENTIFIER ::= { brcdEntityOIDMIBObjects 12 } @@ -273,5 +488,5 @@ brcdEntityOIDCpuPPC8544 OBJECT IDENTIFIER ::= { brcdEntityO brcdEntityOIDCpuPPC8544E OBJECT IDENTIFIER ::= { brcdEntityOIDCpu 10 } brcdEntityOIDCpuPPC8572 OBJECT IDENTIFIER ::= { brcdEntityOIDCpu 11 } brcdEntityOIDCpuPPC8572E OBJECT IDENTIFIER ::= { brcdEntityOIDCpu 12 } - + END diff --git a/foundry/BROCADE-STACK-ISSU-MIB b/foundry/BROCADE-STACK-ISSU-MIB new file mode 100644 index 000000000..afcb753b9 --- /dev/null +++ b/foundry/BROCADE-STACK-ISSU-MIB @@ -0,0 +1,239 @@ +BROCADE-STACK-ISSU-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32 + FROM SNMPv2-SMI + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + DisplayString + FROM FOUNDRY-SN-AGENT-MIB; + +brcdStackISSUMIB MODULE-IDENTITY + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc" + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Management Information for Stack ISSU configuration and operational status. + + Supported Platforms: + - supported on Ruckus Wireless ICX platforms. + + Copyright 1996-2017 Ruckus Wireless, Inc. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information + Base Specification embodies Ruckus Wireless, Inc + confidential and proprietary intellectual property. + Ruckus Wireless, Inc retains all title and ownership + in the Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc + Systems makes no warranty, either express or implied, as to the + use, operation, condition, or performance of the specification, + and any unintended consequence it may on the user environment." + REVISION "201603150000Z" -- March 15, 2016 + DESCRIPTION + "Initial version" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" + ::= { snSwitch 41} + +-- +-- Stack ISSU feature +-- + +brcdStackISSUGlobalObjects OBJECT IDENTIFIER ::= { brcdStackISSUMIB 1 } +brcdStackISSUTableObjects OBJECT IDENTIFIER ::= { brcdStackISSUMIB 2 } + +-- +-- Stack ISSU Global Scalar Object Section +-- + +brcdStackISSUGlobalUpgradeOption OBJECT-TYPE + SYNTAX INTEGER { + none(0), + primary(1), + secondary(2), + primaryOnErrorReloadPrimary (3), + primaryOnErrorReloadSecondary (4), + secondaryOnErrorReloadPrimary (5), + secondaryOnErrorReloadSecondary (6), + abort (7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User configures the system upgrade option to initiate stack upgrade process using primary or secondary image. + The set operation is allowed only on the active unit in stacking system or 802.1BR (SPX) system. + none: reserve state. + primary: system upgrade process using primary image + secondary: system upgrade process using secondary image + primaryOnErrorReloadPrimary: system upgrade process using primary image, reload from primary if upgrade fails + primaryOnErrorReloadSecondary: system upgrade process using primary image, reload from secondary if upgrade fails + secondaryOnErrorReloadPrimary: system upgrade process using secondary image, reload from primary if upgrade fails + secondaryOnErrorReloadSecondary: system upgrade process using secondary image, reload from secondary if upgrade fails + abort: abort upgarde process. A reload is required to bring the stack back to working condition after abort is issued. + The default is none state" + ::= { brcdStackISSUGlobalObjects 1} + +brcdStackISSUGlobalUpgradeStatus OBJECT-TYPE + SYNTAX INTEGER { + notUpgrading (0), + unitToBeUpgraded (1), + unitJoin (2), + unitVersionSync (3), + unitReady (4), + peUnitJoin (5), + peUnitVersionSync (6), + peUnitReady (7), + standbyAssignment (8), + standbySyncCompleted (9), + stackSwitchover (10), + stackSwitchoverCompleted (11), + upgradeAbort(12), + waitingForReload (13) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of upgrade process for a stacking or SPX system + The default state is in notUpgrading state" + ::= { brcdStackISSUGlobalObjects 2} + + +brcdStackISSUGlobalUpgradeSystemReady OBJECT-TYPE + SYNTAX INTEGER { + notReadyUpgrade(0), + ready(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The per-upgrade state of a stacking or SPX system. The system must be in ready state before + the upgrade process starts. It checks the following aspects: + Topology is Ring Yes + Standby Present Yes + Standby ready for upgrade Yes + Flash use in progress No + Secure Setup in progress No + ISSU in progress No + Election in progress No + All units in ready state Yes + Primary Image is upgrade compatible Yes + Secondary Image is upgrade compatible Yes + Startup config and Running Config Same Yes + Config mode conflict No + If one of above check fails, then system is not ready for stack upgrade" + ::= { brcdStackISSUGlobalObjects 3} + + brcdStackISSUGlobalUpgradeError OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The error message of system upgrade process on a stacking or SPX system. + The default is null string, which means system has no error or is in no-upgrade state " + ::= { brcdStackISSUGlobalObjects 4} + +-- +-- Stack ISSU Table Object Section +-- + +-- +-- Stack ISSU Status Unit Table +-- Use this table to display upgrade status or other stacking (SPX) related information for each unit +-- + +brcdStackISSUStatusUnitTable OBJECT-TYPE + SYNTAX SEQUENCE OF BrcdStackISSUStatusUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Stack ISSU status unit table." + ::= { brcdStackISSUTableObjects 1 } + +brcdStackISSUStatusUnitEntry OBJECT-TYPE + SYNTAX BrcdStackISSUStatusUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the stack ISSU status table." + INDEX { brcdStackISSUStatusUnitIndex } + ::= { brcdStackISSUStatusUnitTable 1 } + +BrcdStackISSUStatusUnitEntry ::= SEQUENCE { + brcdStackISSUStatusUnitIndex Integer32, + brcdStackISSUStatusUnitSequence Integer32, + brcdStackISSUStatusUnitType DisplayString, + brcdStackISSUStatusUnitRole INTEGER, + brcdStackISSUStatusUnitStatus INTEGER +} + +brcdStackISSUStatusUnitIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unit Id. If it is a SPX system, CB unit ID is from 1 to 16. + PE unit ID is from 17 to 56" + ::= { brcdStackISSUStatusUnitEntry 1 } + +brcdStackISSUStatusUnitSequence OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence of upgrade in a stacking or SPX system. if unit is PE, the + sequence number is the same as attached to the CB unit in a SPX system. + The default is 0, which means system is in no-upgrade state" + ::= { brcdStackISSUStatusUnitEntry 2 } + +brcdStackISSUStatusUnitType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the system type for each unit." + ::= { brcdStackISSUStatusUnitEntry 3 } + + brcdStackISSUStatusUnitRole OBJECT-TYPE + SYNTAX INTEGER { + other(1), + active(2), + standby(3), + member(4), + standalone(5), + spxPe (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A role for each unit " + ::= { brcdStackISSUStatusUnitEntry 4 } + +brcdStackISSUStatusUnitStatus OBJECT-TYPE + SYNTAX INTEGER { + notUpgraded(0), + upgrading (1), + joined (2), + versionSyncStart (3), + versionSyncComplete (4), + upgradeComplete (5), + upgradeAbort(6), + upgradePending (7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of upgrade for each unit. + The default is in notUpgraded state" + ::= { brcdStackISSUStatusUnitEntry 5 } + +END diff --git a/foundry/FDRY-DAI-MIB b/foundry/FDRY-DAI-MIB index c057aa159..48a2bfb65 100644 --- a/foundry/FDRY-DAI-MIB +++ b/foundry/FDRY-DAI-MIB @@ -13,41 +13,44 @@ IMPORTS FROM FOUNDRY-SN-AGENT-MIB ifIndex FROM IF-MIB; - + fdryDaiMIB MODULE-IDENTITY - LAST-UPDATED "201007260000Z" -- July 26, 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" DESCRIPTION - "Management Information for configuration of Dynamic ARP Inspection feature. + "Management Information for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which validates all ARP packets in a subnet and discard those packets with invalid IP to MAC address bindings. - - Copyright 1996-2010 Brocade Communications Systems, Inc. + + Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended + operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." - + REVISION "201007260000Z" -- July 26, 2010 - DESCRIPTION + DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - + REVISION "201002220000Z" -- February 22, 2010 DESCRIPTION "" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" ::= { snSwitch 35} -- @@ -68,7 +71,7 @@ ArpType ::= TEXTUAL-CONVENTION staticDhcp(7), host(8) } - + ArpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION @@ -109,9 +112,9 @@ fdryDaiVlanConfigEntry OBJECT-TYPE ::= { fdryDaiVlanConfigTable 1 } FdryDaiVlanConfigEntry ::= SEQUENCE { - fdryDaiVlanVLanId + fdryDaiVlanVLanId VlanIndex, - fdryDaiVlanDynArpInspEnable + fdryDaiVlanDynArpInspEnable TruthValue } @@ -161,7 +164,7 @@ fdryDaiIfConfigEntry OBJECT-TYPE ::= { fdryDaiIfConfigTable 1 } FdryDaiIfConfigEntry ::= SEQUENCE { - fdryDaiIfTrustValue + fdryDaiIfTrustValue TruthValue } @@ -175,8 +178,8 @@ fdryDaiIfTrustValue OBJECT-TYPE If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. - If this object is set to 'false', the interface is not trusted. - ARP packets received on this interface will be subjected + If this object is set to 'false', the interface is not trusted. + ARP packets received on this interface will be subjected to ARP inspection." ::= { fdryDaiIfConfigEntry 1 } @@ -191,8 +194,8 @@ fdryDaiArpInspectTable OBJECT-TYPE STATUS current DESCRIPTION "A table provides the mechanism to control Dynamic ARP - Inspection entries. When an IP-MAC mapping entry is created - in a device supporting this table, a corresponding entry of this + Inspection entries. When an IP-MAC mapping entry is created + in a device supporting this table, a corresponding entry of this table will be added." ::= { fdryDaiArpInspect 1 } @@ -207,11 +210,11 @@ fdryDaiArpInspectEntry OBJECT-TYPE ::= { fdryDaiArpInspectTable 1 } FdryDaiArpInspectEntry ::= SEQUENCE { - fdryDaiArpInspectIpAddr + fdryDaiArpInspectIpAddr IpAddress, - fdryDaiArpInspectMacAddr + fdryDaiArpInspectMacAddr MacAddress, - fdryDaiArpInspectRowStatus + fdryDaiArpInspectRowStatus RowStatus, fdryDaiArpInspectType ArpType, @@ -222,7 +225,7 @@ FdryDaiArpInspectEntry ::= SEQUENCE { fdryDaiArpInspectPort DisplayString } - + fdryDaiArpInspectIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible @@ -238,7 +241,7 @@ fdryDaiArpInspectMacAddr OBJECT-TYPE DESCRIPTION "The device MAC address." ::= { fdryDaiArpInspectEntry 2 } - + fdryDaiArpInspectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create diff --git a/foundry/FDRY-DHCP-SNOOPING-MIB b/foundry/FDRY-DHCP-SNOOPING-MIB index f8211c4b2..519a687a5 100644 --- a/foundry/FDRY-DHCP-SNOOPING-MIB +++ b/foundry/FDRY-DHCP-SNOOPING-MIB @@ -13,44 +13,47 @@ IMPORTS FROM Q-BRIDGE-MIB DisplayString FROM FOUNDRY-SN-AGENT-MIB - ifIndex + InterfaceIndex, ifIndex FROM IF-MIB; - + fdryDhcpSnoopMIB MODULE-IDENTITY - LAST-UPDATED "201007260000Z" -- July 26, 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" DESCRIPTION - "Management Information for configuration of DHCP Snooping feature. + "Management Information for configuration of DHCP Snooping feature. DHCP Snooping is a security feature which enables the device to filter - untrusted DHCP packets in a subnet. It can also stop unauthorized DHCP + untrusted DHCP packets in a subnet. It can also stop unauthorized DHCP serves and prevent errors due to user mis-configuration servers. - - Copyright 1996-2010 Brocade Communications Systems, Inc. + + Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended + operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." - + REVISION "201007260000Z" -- July 26, 2010 - DESCRIPTION + DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - + REVISION "201003220000Z" -- March 22, 2010 DESCRIPTION "" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" ::= { snSwitch 36} -- @@ -80,8 +83,8 @@ fdryDhcpSnoopGlobalClearOper OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "valid(0) - this value is always returned when the variable is read. - clear(1) - setting the variable to this value clears all entries in the + "valid(0) - this value is always returned when the variable is read. + clear(1) - setting the variable to this value clears all entries in the DHCP binding database." ::= { fdryDhcpSnoopGlobalObjects 1 } @@ -111,9 +114,9 @@ fdryDhcpSnoopVlanConfigEntry OBJECT-TYPE ::= { fdryDhcpSnoopVlanConfigTable 1 } FdryDhcpSnoopVlanConfigEntry ::= SEQUENCE { - fdryDhcpSnoopVlanVLanId + fdryDhcpSnoopVlanVLanId VlanIndex, - fdryDhcpSnoopVlanDhcpSnoopEnable + fdryDhcpSnoopVlanDhcpSnoopEnable TruthValue } @@ -132,7 +135,7 @@ fdryDhcpSnoopVlanDhcpSnoopEnable OBJECT-TYPE STATUS current DESCRIPTION "This object indicates whether DHCP Snooping is enabled in this VLAN. - + If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false', DHCP Snooping is disabled." ::= { fdryDhcpSnoopVlanConfigEntry 2 } @@ -163,7 +166,7 @@ fdryDhcpSnoopIfConfigEntry OBJECT-TYPE ::= { fdryDhcpSnoopIfConfigTable 1 } FdryDhcpSnoopIfConfigEntry ::= SEQUENCE { - fdryDhcpSnoopIfTrustValue + fdryDhcpSnoopIfTrustValue TruthValue } @@ -177,38 +180,39 @@ fdryDhcpSnoopIfTrustValue OBJECT-TYPE If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without checking. - If this object is set to 'false', the interface is not trusted. - DHCP packets received on this interface will be subjected + If this object is set to 'false', the interface is not trusted. + DHCP packets received on this interface will be subjected to DHCP checks." ::= { fdryDhcpSnoopIfConfigEntry 1 } -- -- DHCP Snooping binding database table --- Use this table to display DHCP Snooping entries +-- fdryDhcpSnoopBindTable is obsoleted in FI9.0, use fdryDhcpSnoopBind2Table -- fdryDhcpSnoopBindTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryDhcpSnoopBindEntry MAX-ACCESS not-accessible - STATUS current + STATUS obsolete DESCRIPTION - "A table provides the information of DHCP snooping + "A table provides the information of DHCP snooping binding database learnt by the device" ::= { fdryDhcpSnoopBind 1 } fdryDhcpSnoopBindEntry OBJECT-TYPE - SYNTAX FdryDhcpSnoopBindEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row instance contains the information of DHCP snoonping entry." - INDEX { fdryDhcpSnoopBindIpAddr } - ::= { fdryDhcpSnoopBindTable 1 } + SYNTAX FdryDhcpSnoopBindEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A row instance contains the information of DHCP snoonping entry." + INDEX { fdryDhcpSnoopBindIpAddr } + ::= { fdryDhcpSnoopBindTable 1 } + FdryDhcpSnoopBindEntry ::= SEQUENCE { - fdryDhcpSnoopBindIpAddr + fdryDhcpSnoopBindIpAddr IpAddress, - fdryDhcpSnoopBindMacAddr + fdryDhcpSnoopBindMacAddr MacAddress, fdryDhcpSnoopBindType ArpType, @@ -221,35 +225,37 @@ FdryDhcpSnoopBindEntry ::= SEQUENCE { fdryDhcpSnoopBindClearOper ClearAction } - + fdryDhcpSnoopBindIpAddr OBJECT-TYPE SYNTAX IpAddress - MAX-ACCESS not-accessible - STATUS current + MAX-ACCESS not-accessible + STATUS obsolete DESCRIPTION "The device IP address." ::= { fdryDhcpSnoopBindEntry 1} fdryDhcpSnoopBindMacAddr OBJECT-TYPE SYNTAX MacAddress - MAX-ACCESS read-only - STATUS current + MAX-ACCESS read-only + STATUS obsolete DESCRIPTION "The device MAC address." ::= { fdryDhcpSnoopBindEntry 2 } + fdryDhcpSnoopBindType OBJECT-TYPE SYNTAX ArpType MAX-ACCESS read-only - STATUS current + STATUS obsolete DESCRIPTION "The type of the ARP entry" ::= { fdryDhcpSnoopBindEntry 3 } + fdryDhcpSnoopBindState OBJECT-TYPE SYNTAX ArpState MAX-ACCESS read-only - STATUS current + STATUS obsolete DESCRIPTION "The state of the ARP entry" ::= { fdryDhcpSnoopBindEntry 4 } @@ -257,15 +263,15 @@ fdryDhcpSnoopBindState OBJECT-TYPE fdryDhcpSnoopBindPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only - STATUS current + STATUS obsolete DESCRIPTION "The port of the ARP entry" ::= { fdryDhcpSnoopBindEntry 5 } fdryDhcpSnoopBindVlanId OBJECT-TYPE SYNTAX VlanIndex - MAX-ACCESS read-only - STATUS current + MAX-ACCESS read-only + STATUS obsolete DESCRIPTION "This object indicates the VLAN number on which DHCP snooping feature is configured." @@ -274,12 +280,117 @@ fdryDhcpSnoopBindVlanId OBJECT-TYPE fdryDhcpSnoopBindClearOper OBJECT-TYPE SYNTAX ClearAction MAX-ACCESS read-write - STATUS current + STATUS obsolete DESCRIPTION - "valid(0) - this value is always returned when the variable is read. - clear(1) - setting the variable to this value clears this entry in the + "valid(0) - this value is always returned when the variable is read. + clear(1) - setting the variable to this value clears this entry in the DHCP binding database." ::= {fdryDhcpSnoopBindEntry 7 } +fdryDhcpSnoopBind2Table OBJECT-TYPE + SYNTAX SEQUENCE OF FdryDhcpSnoopBind2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the information of DHCP snooping + binding database learnt by the device" + ::= { fdryDhcpSnoopBind 2 } + + +fdryDhcpSnoopBind2Entry OBJECT-TYPE + SYNTAX FdryDhcpSnoopBind2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the information of DHCP snoonping entry." + INDEX { fdryDhcpSnoopBind2MacAddr, fdryDhcpSnoopBind2VlanId} + ::= { fdryDhcpSnoopBind2Table 1 } + + +FdryDhcpSnoopBind2Entry ::= SEQUENCE { + fdryDhcpSnoopBind2MacAddr + MacAddress, + fdryDhcpSnoopBind2VlanId + VlanIndex, + fdryDhcpSnoopBind2IpAddr + IpAddress, + fdryDhcpSnoopBind2Type + ArpType, + fdryDhcpSnoopBind2State + ArpState, + fdryDhcpSnoopBind2Port + InterfaceIndex, + fdryDhcpSnoopBind2ClearOper + ClearAction + } + +fdryDhcpSnoopBind2MacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The device MAC address." + ::= { fdryDhcpSnoopBind2Entry 1 } + +fdryDhcpSnoopBind2VlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN number on which DHCP snooping + feature is configured." + ::= { fdryDhcpSnoopBind2Entry 2 } + + + +fdryDhcpSnoopBind2IpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device IP address." + ::= { fdryDhcpSnoopBind2Entry 3} + + +fdryDhcpSnoopBind2Type OBJECT-TYPE + SYNTAX ArpType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the ARP entry" + ::= { fdryDhcpSnoopBind2Entry 4 } + + +fdryDhcpSnoopBind2State OBJECT-TYPE + SYNTAX ArpState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the ARP entry" + ::= { fdryDhcpSnoopBind2Entry 5 } + + +fdryDhcpSnoopBind2Port OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port of the ARP entry" + ::= { fdryDhcpSnoopBind2Entry 6 } + + +fdryDhcpSnoopBind2ClearOper OBJECT-TYPE + SYNTAX ClearAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "valid(0) - this value is always returned when the variable is read. + clear(1) - setting the variable to this value clears this entry in the + DHCP binding database." + ::= {fdryDhcpSnoopBind2Entry 7 } + + + + END diff --git a/foundry/FDRY-DNS2-MIB b/foundry/FDRY-DNS2-MIB index 7fb7a5d77..b4cdddc9e 100644 --- a/foundry/FDRY-DNS2-MIB +++ b/foundry/FDRY-DNS2-MIB @@ -3,48 +3,46 @@ FDRY-DNS2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, Unsigned32, OBJECT-TYPE FROM SNMPv2-SMI -- [RFC2578] - DisplayString, RowStatus + DisplayString, RowStatus FROM SNMPv2-TC -- [RFC2579] - InetAddressType, InetAddress + InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- [RFC 4001] ; - + fdryDns2MIB MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc.." CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Domain Name Service(DNS) - It has new IPv4/IPv6 combined tables for Domain Name Service Address List and Name configuration. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200901300000Z" -- 30 Jan 2009 + "The Ruckus Wireless proprietary MIB module for Domain Name Service(DNS) + It has new IPv4/IPv6 combined tables for Domain Name Service Address List and Name configuration. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification." + + REVISION "200901300000Z" -- 30 Jan 2009 DESCRIPTION "Initial version, obsoletes the earlier mib groups to resolve the mib conflicts. fdryDns2MIB obsoletes fdryDnsMIB, fdryDns2DomainName obsoletes fdryDnsDomainName, fdryDnsServer obsoletes fdryDnsServerAddress" - + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) products(1) switch(1) snSwitch(3) 34 } -- @@ -55,7 +53,7 @@ fdryDns2MIB MODULE-IDENTITY fdryDnsServer OBJECT IDENTIFIER ::= { fdryDns2MIB 2 } -- - -- Ipv4/Ipv6 mib table for Domain Name Service (DNS) Domain Name + -- This table is for a list of Domain Name Service (DNS) Domain Names -- fdryDns2DomainNameTable OBJECT-TYPE @@ -65,7 +63,7 @@ fdryDns2MIB MODULE-IDENTITY DESCRIPTION "Domain Name Service domain name table." ::= { fdryDns2DomainName 1 } - + fdryDns2DomainNameEntry OBJECT-TYPE SYNTAX FdryDns2DomainNameEntry MAX-ACCESS not-accessible @@ -74,14 +72,14 @@ fdryDns2MIB MODULE-IDENTITY "An entry in the DNS domain name table." INDEX { fdryDns2DomainNameIndex } ::= { fdryDns2DomainNameTable 1 } - + FdryDns2DomainNameEntry ::= SEQUENCE { fdryDns2DomainNameIndex Unsigned32, fdryDns2DomainNameAddrType InetAddressType, fdryDns2DomainNameName DisplayString, fdryDns2DomainNameRowStatus RowStatus } - + fdryDns2DomainNameIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible @@ -89,24 +87,25 @@ fdryDns2MIB MODULE-IDENTITY DESCRIPTION "The index to the DNS name table." ::= { fdryDns2DomainNameEntry 1 } - + fdryDns2DomainNameAddrType OBJECT-TYPE SYNTAX InetAddressType - MAX-ACCESS read-create + MAX-ACCESS read-only STATUS current DESCRIPTION - "DNS IP address Type. Supported address types are ipv4(1) and ipv6(2)" + "DNS IP address Type. Supported address types are ipv4(1) and ipv6(2) + Note: from FI9000, the address type is not needed. This table represents a list for DNS domain names" DEFVAL { ipv4 } ::= { fdryDns2DomainNameEntry 2 } - + fdryDns2DomainNameName OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..64)) + SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-create STATUS current DESCRIPTION "Domain Name Service Domain Name string." ::= { fdryDns2DomainNameEntry 3 } - + fdryDns2DomainNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create @@ -129,7 +128,7 @@ fdryDns2MIB MODULE-IDENTITY DESCRIPTION "DNS server table, listing the Ipv4/Ipv6 DNS server addresses" ::= { fdryDnsServer 1 } - + fdryDnsServerEntry OBJECT-TYPE SYNTAX FdryDnsServerEntry MAX-ACCESS not-accessible @@ -139,7 +138,7 @@ fdryDns2MIB MODULE-IDENTITY INDEX {fdryDnsServerAddrType, fdryDnsServerIndex} ::= { fdryDnsServerTable 1 } - + FdryDnsServerEntry ::= SEQUENCE { fdryDnsServerAddrType InetAddressType, @@ -167,7 +166,7 @@ fdryDns2MIB MODULE-IDENTITY "The index to the DNS server table. Currently, up to 4 DNS server entries each are supported for IPv4 and IPv6." ::= { fdryDnsServerEntry 2 } - + fdryDnsServerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create @@ -175,7 +174,7 @@ fdryDns2MIB MODULE-IDENTITY DESCRIPTION "DNS server IP address." ::= { fdryDnsServerEntry 3 } - + fdryDnsServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create diff --git a/foundry/FDRY-IP-SOURCE-GUARD-MIB b/foundry/FDRY-IP-SOURCE-GUARD-MIB index 0690fd72f..e62d90687 100644 --- a/foundry/FDRY-IP-SOURCE-GUARD-MIB +++ b/foundry/FDRY-IP-SOURCE-GUARD-MIB @@ -11,42 +11,45 @@ IMPORTS FROM Q-BRIDGE-MIB ifIndex, InterfaceIndex FROM IF-MIB; - + fdryIpSrcGuardMIB MODULE-IDENTITY - LAST-UPDATED "201007260000Z" -- July 26, 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" DESCRIPTION - "Management Information for configuration of IP Source Guard feature. - IP Source Guard is a security feature that restricts IP traffic on untrusted - ports by filtering traffic based on the DHCP snooping binding database or + "Management Information for configuration of IP Source Guard feature. + IP Source Guard is a security feature that restricts IP traffic on untrusted + ports by filtering traffic based on the DHCP snooping binding database or manually configured IP source bindings. - - Copyright 1996-2010 Brocade Communications Systems, Inc. + + Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended + operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." - + REVISION "201007260000Z" -- July 26, 2010 - DESCRIPTION + DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - + REVISION "201002220000Z" -- February 22, 2010 DESCRIPTION "" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" ::= { snSwitch 37} BindMode ::= TEXTUAL-CONVENTION @@ -67,7 +70,7 @@ BindType ::= TEXTUAL-CONVENTION other(1), ip(2) } - + fdryIpSrcGuardInterface OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 1 } fdryIpSrcGuardPortVlan OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 2 } fdryIpSrcGuardBind OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 3 } @@ -81,7 +84,7 @@ fdryIpSrcGuardIfConfigTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table provides the mechanism to configure enabling or disabling + "A table provides the mechanism to configure enabling or disabling IP Source Guard purpose at each physical interface." ::= { fdryIpSrcGuardInterface 1 } @@ -90,13 +93,13 @@ fdryIpSrcGuardIfConfigEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A row instance contains the configuration to enable or disable IP + "A row instance contains the configuration to enable or disable IP Source Guard at each physical interface capable of this feature." INDEX { ifIndex } ::= { fdryIpSrcGuardIfConfigTable 1 } FdryIpSrcGuardIfConfigEntry ::= SEQUENCE { - fdryIpSrcGuardIfEnable + fdryIpSrcGuardIfEnable TruthValue } @@ -105,10 +108,10 @@ fdryIpSrcGuardIfEnable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "This object indicates whether IP Source Guard is + "This object indicates whether IP Source Guard is enabled at this interface. If this object is set to 'true', IP Source Guard is enabled. - Traffic coming to this interface will be forwarded. If it is + Traffic coming to this interface will be forwarded. If it is from the list of IP addresses obtained from DHCP snooping. Otherwise it is denied. If this object is set to 'false', IP Source Guard is disabled." @@ -123,7 +126,7 @@ fdryIpSrcGuardPortVlanConfigTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table provides the mechanism to configure enabling or disabling + "A table provides the mechanism to configure enabling or disabling IP Source Guard purpose per port per VLAN." ::= { fdryIpSrcGuardPortVlan 1 } @@ -132,7 +135,7 @@ fdryIpSrcGuardPortVlanConfigEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A row instance contains the configuration to enable or disable IP + "A row instance contains the configuration to enable or disable IP Source Guard per port per VLAN of this feature." INDEX { fdryIpSrcGuardPortVlanPortId, fdryIpSrcGuardPortVlanVlanId } ::= { fdryIpSrcGuardPortVlanConfigTable 1 } @@ -142,7 +145,7 @@ FdryIpSrcGuardPortVlanConfigEntry ::= SEQUENCE { InterfaceIndex, fdryIpSrcGuardPortVlanVlanId VlanIndex, - fdryIpSrcGuardPortVlanEnable + fdryIpSrcGuardPortVlanEnable TruthValue } @@ -167,7 +170,7 @@ fdryIpSrcGuardPortVlanEnable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "This object indicates whether IP Source Guard is + "This object indicates whether IP Source Guard is enabled at this interface and this VLAN number. If this object is set to 'true', IP Source Guard per-port-per-VLAN is enabled. If this object is set to 'false', IP Source Guard per-port-per-VLAN is disabled." @@ -183,8 +186,8 @@ fdryIpSrcGuardBindTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table provides the information of IP addresses used IP Source - Guard purpose at each physical interface with or without specific VLAN + "A table provides the information of IP addresses used IP Source + Guard purpose at each physical interface with or without specific VLAN memberships " ::= { fdryIpSrcGuardBind 1 } @@ -193,13 +196,13 @@ fdryIpSrcGuardBindEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A row instance contains IP address used for IP Source Guard purpose + "A row instance contains IP address used for IP Source Guard purpose at each physical interface with or without specific VLAN memberships ." INDEX { ifIndex, fdryIpSrcGuardBindIpAddr } ::= { fdryIpSrcGuardBindTable 1 } FdryIpSrcGuardBindEntry ::= SEQUENCE { - fdryIpSrcGuardBindIpAddr + fdryIpSrcGuardBindIpAddr IpAddress, fdryIpSrcGuardBindVlanId Unsigned32, @@ -210,7 +213,7 @@ FdryIpSrcGuardBindEntry ::= SEQUENCE { fdryIpSrcGuardBindType BindType } - + fdryIpSrcGuardBindIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible @@ -226,8 +229,8 @@ fdryIpSrcGuardBindVlanId OBJECT-TYPE DESCRIPTION "This object indicates the specific VLAN memberships on this interface. The VLAN number is optional. If you configure a VLAN number, the bindings - applies to that VLAN only. If you do not configure a VLAN number, the static - applies to all VLANs associated with the port. In this case, the VLAN number + applies to that VLAN only. If you do not configure a VLAN number, the static + applies to all VLANs associated with the port. In this case, the VLAN number will be displayed as 0." ::= { fdryIpSrcGuardBindEntry 2 } @@ -243,7 +246,7 @@ fdryIpSrcGuardBindRowStatus OBJECT-TYPE ::= { fdryIpSrcGuardBindEntry 3 } fdryIpSrcGuardBindMode OBJECT-TYPE - SYNTAX BindMode + SYNTAX BindMode MAX-ACCESS read-only STATUS current DESCRIPTION @@ -251,12 +254,12 @@ fdryIpSrcGuardBindMode OBJECT-TYPE ::= { fdryIpSrcGuardBindEntry 4 } fdryIpSrcGuardBindType OBJECT-TYPE - SYNTAX BindType + SYNTAX BindType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the IP Source Guard entry" ::= { fdryIpSrcGuardBindEntry 5 } - + END diff --git a/foundry/FDRY-IPV6-IP-MIB b/foundry/FDRY-IPV6-IP-MIB index 5f7f3fc3f..6d650e1fc 100644 --- a/foundry/FDRY-IPV6-IP-MIB +++ b/foundry/FDRY-IPV6-IP-MIB @@ -1,7 +1,7 @@ FDRY-IPV6-IP-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RtrStatus FROM FOUNDRY-SN-IP-MIB --[snrouteru.mib] @@ -10,37 +10,37 @@ IMPORTS ; fdryIpv6MIB MODULE-IDENTITY - LAST-UPDATED "201007260000Z" -- July 26, 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 07, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" DESCRIPTION - "The Brocade proprietary MIB module for IPv6. - - Copyright 1996-2010 Brocade Communications Systems, Inc. + "The Ruckus Wireless proprietary MIB module for IPv6. + + Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended + operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." - - REVISION "201007260000Z" -- July 26, 2010 - DESCRIPTION + + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." REVISION "201005060000Z" -- 06 May 2010 DESCRIPTION "" - + ::= { fdryIpv6 1 } diff --git a/foundry/FDRY-POE-MIB b/foundry/FDRY-POE-MIB index 70e601c94..abe5552e9 100644 --- a/foundry/FDRY-POE-MIB +++ b/foundry/FDRY-POE-MIB @@ -1,50 +1,48 @@ FDRY-POE-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] DisplayString FROM SNMPv2-TC -- [RFC2579] InterfaceIndex FROM IF-MIB snAgentSys FROM FOUNDRY-SN-ROOT-MIB ; - + snAgentPoe MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Power Over Ethernet(PoE) - It has PoE port and module configuring information. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION "Changed INTEGER to Integer32" - - REVISION "200904030000Z" -- 3 April 2009 - DESCRIPTION "Initial version, snAgentPoePortTable which was in SNMPv1 written in SNMPv2-SMI." - - ::= { snAgentSys 14 } + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc.." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" + DESCRIPTION + "The Ruckus Wireless proprietary MIB module for Power Over Ethernet(PoE) + It has PoE port and module configuring information. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "Changed INTEGER to Integer32" + REVISION "200904030000Z" -- 3 April 2009 + DESCRIPTION "Initial version, snAgentPoePortTable which was in SNMPv1 written in SNMPv2-SMI." + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + + ::= { snAgentSys 14 } -- Power Over Ethernet MIB Group @@ -114,7 +112,25 @@ SnAgentPoePortEntry ::= SEQUENCE { snAgentPoePortConsumed Integer32, snAgentPoePortType - DisplayString + DisplayString, + snAgentPoePortPDClass + Integer32, + snAgentPoePortPDClassB + Integer32, + snAgentPoePortlldpReqPwr + Integer32, + snAgentPoePortlldpReqPwrA + Integer32, + snAgentPoePortlldpReqPwrB + Integer32, + snAgentPoePortCapability + INTEGER, + snAgentPoePortMax2PairPwr + Integer32, + snAgentPoePortMax4PairPwr + Integer32, + snAgentPoePortMode + INTEGER } snAgentPoePortNumber OBJECT-TYPE @@ -146,8 +162,8 @@ snAgentPoePortWattage OBJECT-TYPE STATUS current DESCRIPTION "Adjust the inline power wattage. Valid value between 1000 - to 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is milliwatts. This object can only be - set after snSwIfInLinePowerControl has been set to 'enable(3)' + to 15400(IEEE802_3AF)/30000(IEEE802_3AT)/120000(IEEE802_3BT). Each unit is milliwatts. + This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value." ::= { snAgentPoePortEntry 3 } @@ -160,8 +176,8 @@ snAgentPoePortClass OBJECT-TYPE "Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If - a port does not have inline power capability, reading this - object returns undefined value." + a port does not have inline power capability or is not configured by + the user, reading this object returns undefined value (0)." ::= { snAgentPoePortEntry 4 } snAgentPoePortPriority OBJECT-TYPE @@ -194,11 +210,100 @@ snAgentPoePortType OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Inline Power device type 802.3af, 802.3at or Legacy device." + "Inline Power device type 802.3af, 802.3at, 802.3bt or Legacy device." ::= { snAgentPoePortEntry 7 } +snAgentPoePortPDClass OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is a PD signature which the decive learns in the process of + PD-classification. PD detection and PD-classification are two steps of powering PD. + And if PD is powered without user power Spec, then PoE port power limit will be set + based on pd-detected class. The value is PDClassA in case of dual signature (IEEE 802.3bt module) PD." + ::= { snAgentPoePortEntry 8 } + +snAgentPoePortPDClassB OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is second PD class signature of dual signature PD which the device learns in the process of + PD-classification. PD detection and PD-classification are two steps of powering PD. + And if PD is powered without user power Spec, then PoE port power limit will be set + based on both pd-detected classes. The value PDClassB is valid for dual signature PD (IEEE 802.3bt module) + having PDClassA and PDClassB. If the PD is not dual signature the value is 0." + ::= { snAgentPoePortEntry 9 } + +snAgentPoePortlldpReqPwr OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum power requested by PD through LLDP in milliwatts." + ::= { snAgentPoePortEntry 10 } --- Power Over Module Table +snAgentPoePortlldpReqPwrA OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel + snAgentPoePortlldpReqPwrA is power in milliwatts for channel A. + This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib." + ::= { snAgentPoePortEntry 11 } + +snAgentPoePortlldpReqPwrB OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel + snAgentPoePortlldpReqPwrB is power in milliwatts for channel B. + This is deprecated as the required information is part of snAgentPoePortlldpReqPwr mib." + ::= { snAgentPoePortEntry 12 } + +snAgentPoePortCapability OBJECT-TYPE + SYNTAX INTEGER { + others(0), + twoPairPse(1), + fourPairPse(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Capability of port, 0-others, 1-2pair, 2-4pair." + ::= { snAgentPoePortEntry 13 } + +snAgentPoePortMax2PairPwr OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum power supported by 2pair port in milliwatts." + ::= { snAgentPoePortEntry 14 } + +snAgentPoePortMax4PairPwr OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum power supported by 4pair port in milliwatts." + ::= { snAgentPoePortEntry 15 } + +snAgentPoePortMode OBJECT-TYPE + SYNTAX INTEGER { + none(0), + overdrive(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Poe port overdrive mode." + ::= { snAgentPoePortEntry 16 } + + -- Power Over Module Table snAgentPoeModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoeModuleEntry @@ -250,7 +355,7 @@ snAgentPoeModuleMaxPDTypeSupport OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "This object talks about the POE module type which is capable to support Power Device (PD) type + "This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also support ieee802.3af but reverse is not true." @@ -265,7 +370,7 @@ snAgentPoeUnitTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table of POE informaion for each unit. Only the unit + "A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row" ::= { snAgentPoeUnit 1 } @@ -283,10 +388,12 @@ SnAgentPoeUnitEntry ::= SEQUENCE { Unsigned32, snAgentPoeUnitPowerCapacityTotal Unsigned32, - snAgentPoeUnitPowerCapacityFree + snAgentPoeUnitPowerCapacityFree Unsigned32, snAgentPoeUnitPowerAllocationsRequestsHonored - Unsigned32 + Unsigned32, + snAgentPoePwrAllocationType + INTEGER } snAgentPoeUnitIndex OBJECT-TYPE @@ -310,8 +417,9 @@ snAgentPoeUnitPowerCapacityFree OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts." - ::= { snAgentPoeUnitEntry 3 } + "This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts. + In case of Static allocation total free power and in case of Dynamic allocation total unconsumed power is disaplyed" + ::= { snAgentPoeUnitEntry 3} snAgentPoeUnitPowerAllocationsRequestsHonored OBJECT-TYPE SYNTAX Unsigned32 @@ -321,4 +429,16 @@ snAgentPoeUnitPowerAllocationsRequestsHonored OBJECT-TYPE "This object shows number of times the inline power allocations requests honored on that unit (device)." ::= { snAgentPoeUnitEntry 4} +snAgentPoePwrAllocationType OBJECT-TYPE + SYNTAX INTEGER { + none(0), + static(1), + dynamic(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object shows the power allocation type, based on which the total free capacity is displayed. Static(1) or Dynamic(2) power allocation." + ::= { snAgentPoeUnitEntry 5} + END diff --git a/foundry/FDRY-RADIUS-MIB b/foundry/FDRY-RADIUS-MIB index fa738d5ea..e2b7512e2 100644 --- a/foundry/FDRY-RADIUS-MIB +++ b/foundry/FDRY-RADIUS-MIB @@ -1,49 +1,47 @@ FDRY-RADIUS-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC -- [RFC2579] DisplayString FROM SNMPv2-TC -- [RFC2579] - - InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- [RFC 4001] + + InetAddressType FROM INET-ADDRESS-MIB -- [RFC 4001] fdryRadius FROM FOUNDRY-SN-ROOT-MIB -- [snroo101] ; - + fdryRadiusMIB MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Radius Authentication Servers - It has new table combines Ipv4 and Ipv6 Radius Authentication Servers configuration. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - - REVISION "200802250000Z" -- 25 February 2008 - DESCRIPTION "Initial version, obsoletes the earlier snRadiusServerTable." - + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc.." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" + DESCRIPTION + "The Ruckus Wireless proprietary MIB module for Radius Authentication Servers + It has new table combines Ipv4 and Ipv6 Radius Authentication Servers configuration. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + + REVISION "200802250000Z" -- 25 February 2008 + DESCRIPTION "Initial version, obsoletes the earlier snRadiusServerTable." + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + ::= { fdryRadius 1 } -- @@ -59,6 +57,20 @@ fdryRadiusMIB MODULE-IDENTITY authorizationOnly(3), accountingOnly(4) } + InetAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x " + STATUS current + DESCRIPTION + "Denotes a generic Internet address. + An InetAddress value is always interpreted within the context + of an InetAddressType value. Every usage of the InetAddress + textual convention is required to specify the InetAddressType + object that provides the context. It is suggested that the + InetAddressType object be logically registered before the + object(s) that use the InetAddress textual convention, if + they appear in the same logical row + " + SYNTAX OCTET STRING (SIZE (0..255)) -- -- Top level components of this MIB. -- @@ -68,14 +80,13 @@ fdryRadiusMIB MODULE-IDENTITY -- -- Ipv4/Ipv6 Radius server table -- - + fdryRadiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryRadiusServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION - "Radius server table, listing the RADIUS authentication servers. - This table is currently supported by FastIron platform." + "Radius server table, listing the RADIUS authentication servers" ::= { fdryRadiusServer 1 } fdryRadiusServerEntry OBJECT-TYPE @@ -87,8 +98,8 @@ fdryRadiusServerEntry OBJECT-TYPE Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. - 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. - The PDU gets to be huge too! + 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. + The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers." INDEX { fdryRadiusServerIndex } ::= { fdryRadiusServerTable 1 } @@ -109,7 +120,12 @@ FdryRadiusServerEntry ::= SEQUENCE { fdryRadiusServerUsage ServerUsage, fdryRadiusServerRowStatus - RowStatus + RowStatus, + fdryRadiusServerAuthType + OCTET STRING, + fdryRadiusServerPriority + Unsigned32 + } fdryRadiusServerIndex OBJECT-TYPE @@ -117,8 +133,7 @@ fdryRadiusServerIndex OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "The index to the Radius server Table. - FastIron platform supports upto 8 servers." + "The index to the Radius server Table. Maximum 8 Radius servers are supported." ::= { fdryRadiusServerEntry 1 } fdryRadiusServerAddrType OBJECT-TYPE @@ -126,8 +141,7 @@ fdryRadiusServerAddrType OBJECT-TYPE MAX-ACCESS read-create STATUS current DESCRIPTION - "Radius server IP address Type. - FastIron supports address types of ipv4(1) and ipv6(2)." + "Radius server IP address Type. Supported address types are ipv4(1) and ipv6(2)" DEFVAL { ipv4 } ::= { fdryRadiusServerEntry 2 } @@ -144,8 +158,8 @@ fdryRadiusServerAuthPort OBJECT-TYPE MAX-ACCESS read-create STATUS current DESCRIPTION - "Authentication UDP port number. - FastIron platform supports default value 1645." + "Authentication UDP port number." + DEFVAL { 1645 } ::= { fdryRadiusServerEntry 4 } fdryRadiusServerAcctPort OBJECT-TYPE @@ -153,17 +167,16 @@ fdryRadiusServerAcctPort OBJECT-TYPE MAX-ACCESS read-create STATUS current DESCRIPTION - "Account UDP port number. - FastIron platform supports default value 1646." + "Account UDP port number." + DEFVAL { 1646 } ::= { fdryRadiusServerEntry 5 } fdryRadiusServerRowKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION - "Authentication key displayed as encrypted text. - FastIron platform supports keysize upto 32 characters." + "Authentication key displayed as encrypted text." ::= { fdryRadiusServerEntry 6 } fdryRadiusServerUsage OBJECT-TYPE @@ -173,7 +186,7 @@ fdryRadiusServerUsage OBJECT-TYPE DESCRIPTION "To allow this server to be dedicated for a particular AAA activity." DEFVAL { default } - ::= { fdryRadiusServerEntry 7 } + ::= { fdryRadiusServerEntry 7 } fdryRadiusServerRowStatus OBJECT-TYPE SYNTAX RowStatus @@ -181,10 +194,30 @@ fdryRadiusServerRowStatus OBJECT-TYPE STATUS current DESCRIPTION "This variable is used to create, modify, or - delete a row in this table. When a row in this - table is in active(1) state, no objects in that row - can be modified except this object. - " + delete a row in this table. When a row in this + table is in active(1) state, no objects in that row + can be modified except this object. + " ::= { fdryRadiusServerEntry 8 } +fdryRadiusServerAuthType OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "To allow this server to support dot1x/mac-auth/web-auth + 0 - mac-auth + 1 - dot1x + 2 - web-auth" + ::= { fdryRadiusServerEntry 9 } + +fdryRadiusServerPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Radius server priority 0-7." + DEFVAL { 0 } + ::= { fdryRadiusServerEntry 10 } + END diff --git a/foundry/FDRY-TACACS-MIB b/foundry/FDRY-TACACS-MIB index 4df4dfaf9..5ee883d0b 100644 --- a/foundry/FDRY-TACACS-MIB +++ b/foundry/FDRY-TACACS-MIB @@ -1,51 +1,66 @@ FDRY-TACACS-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RowStatus FROM SNMPv2-TC -- [RFC2579] DisplayString FROM SNMPv2-TC -- [RFC2579] - - InetAddressType, InetAddress FROM INET-ADDRESS-MIB + + InetAddressType FROM INET-ADDRESS-MIB fdryTacacs FROM FOUNDRY-SN-ROOT-MIB -- [snroo101] ServerUsage FROM FDRY-RADIUS-MIB -- [fdryradius] ; - + fdryTacacsMIB MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Tacacs Authentication Servers - It has new table combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200802250000Z" -- 25 February 2008 - DESCRIPTION "Initial version, obsoletes the earlier snTacacsServerTable." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc.." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" + DESCRIPTION + "The Ruckus Wireless proprietary MIB module for Tacacs Authentication Servers + It has new table combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + + REVISION "200802250000Z" -- 25 February 2008 + DESCRIPTION "Initial version, obsoletes the earlier snTacacsServerTable." + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { fdryTacacs 1 } + -- textual conventions + + InetAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x " + STATUS current + DESCRIPTION + "Denotes a generic Internet address. + An InetAddress value is always interpreted within the context + of an InetAddressType value. Every usage of the InetAddress + textual convention is required to specify the InetAddressType + object that provides the context. It is suggested that the + InetAddressType object be logically registered before the + object(s) that use the InetAddress textual convention, if + they appear in the same logical row + " + SYNTAX OCTET STRING (SIZE (0..255)) -- -- Top level components of this MIB. -- @@ -55,16 +70,15 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } -- -- Ipv4/Ipv6 Tacacs server table -- - + fdryTacacsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryTacacsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION - "Tacacs server table, listing the Tacacs authentication servers. - This table is currently supported by FastIron platform." + "Tacacs server table, listing the Tacacs authentication servers" ::= { fdryTacacsServer 1 } - + fdryTacacsServerEntry OBJECT-TYPE SYNTAX FdryTacacsServerEntry MAX-ACCESS not-accessible @@ -74,12 +88,12 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. - 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. - The PDU gets to be huge too! + 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. + The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers." INDEX { fdryTacacsServerIndex } ::= { fdryTacacsServerTable 1 } - + FdryTacacsServerEntry ::= SEQUENCE { fdryTacacsServerIndex Unsigned32, @@ -96,26 +110,24 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } fdryTacacsServerRowStatus RowStatus } - + fdryTacacsServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION - "The index to the Tacacs server Table. - FastIron platform supports upto 8 servers." + "The index to the Tacacs server Table, Maximum 8 Tacacs servers are supported." ::= { fdryTacacsServerEntry 1 } - + fdryTacacsServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION - "Tacacs server IP address Type. - FastIron supports address types of ipv4(1) and ipv6(2)." + "Tacacs server IP address Type. Supported address types are ipv4(1) and ipv6(2)" DEFVAL { ipv4 } ::= { fdryTacacsServerEntry 2 } - + fdryTacacsServerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create @@ -123,7 +135,7 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } DESCRIPTION "Tacacs server IP address." ::= { fdryTacacsServerEntry 3 } - + fdryTacacsServerAuthPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create @@ -132,16 +144,15 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } "Authentication UDP port number." DEFVAL { 49 } ::= { fdryTacacsServerEntry 4 } - + fdryTacacsServerRowKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION - "Authentication key displayed as encrypted text. - FastIron platform supports keysize upto 32 characters." + "Authentication key displayed as encrypted text." ::= { fdryTacacsServerEntry 5 } - + fdryTacacsServerUsage OBJECT-TYPE SYNTAX ServerUsage MAX-ACCESS read-create @@ -162,5 +173,5 @@ fdryTacacsServer OBJECT IDENTIFIER ::= { fdryTacacsMIB 1 } can be modified except this object. " ::= { fdryTacacsServerEntry 7 } - + END diff --git a/foundry/FDRY-TRAP-MIB b/foundry/FDRY-TRAP-MIB index 8a2e87c77..c0b9b4f35 100644 --- a/foundry/FDRY-TRAP-MIB +++ b/foundry/FDRY-TRAP-MIB @@ -1,53 +1,69 @@ FDRY-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC -- [RFC2579] - - InetAddressType, InetAddress FROM INET-ADDRESS-MIB + + InetAddressType FROM INET-ADDRESS-MIB fdryTrap FROM FOUNDRY-SN-ROOT-MIB -- [snroo101] ; - + fdryTrapMIB MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Traps. - It has new table combines Ipv4 and Ipv6 configuration of - trap Receiver/managers which to send traps. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - + LAST-UPDATED "202305250000Z" -- May 25, 2023 + ORGANIZATION "Ruckus Wireless, Inc.." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" + DESCRIPTION + "The Ruckus Wireless proprietary MIB module for Traps. + It has new table combines Ipv4 and Ipv6 configuration of + trap Receiver/managers which to send traps. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200802250000Z" -- 25 February 2008 DESCRIPTION "Initial version, obsoletes the earlier snAgTrpRcvrTable." - + REVISION "202305250000Z" -- May 25, 2023 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { fdryTrap 1 } -- -- Textual Conventions -- + + +InetAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x " + STATUS current + DESCRIPTION + "Denotes a generic Internet address. + An InetAddress value is always interpreted within the context + of an InetAddressType value. Every usage of the InetAddress + textual convention is required to specify the InetAddressType + object that provides the context. It is suggested that the + InetAddressType object be logically registered before the + object(s) that use the InetAddress textual convention, if + they appear in the same logical row + " + SYNTAX OCTET STRING (SIZE (0..255)) + + SecurityModel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION @@ -67,7 +83,7 @@ SecurityLevel ::= TEXTUAL-CONVENTION auth(2), authPriv(3) } - + -- -- Top level components of this MIB. -- @@ -77,7 +93,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } -- -- Ipv4/Ipv6 trap receiver table -- - + fdryTrapReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryTrapReceiverEntry MAX-ACCESS not-accessible @@ -85,7 +101,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } DESCRIPTION "Trap Receiver table." ::= { fdryTrapReceiver 1 } - + fdryTrapReceiverEntry OBJECT-TYPE SYNTAX FdryTrapReceiverEntry MAX-ACCESS not-accessible @@ -95,12 +111,12 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } Reasons to go for running index Scheme than IP addresses: 1. The table will be Virtual Routing and Forwarding(VRF) independent that multiple VRFs could share the same address type and address. - 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. - The PDU gets to be huge too! + 2. Index with address type and address could be potentially 17 unsigned integer, parsing and finding next index takes CPU time. + The PDU gets to be huge too! 3. IP address is just another attribute, they are supposed to be list of servers." INDEX { fdryTrapReceiverIndex } ::= { fdryTrapReceiverTable 1 } - + FdryTrapReceiverEntry ::= SEQUENCE { fdryTrapReceiverIndex Unsigned32, @@ -119,7 +135,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } fdryTrapReceiverRowStatus RowStatus } - + fdryTrapReceiverIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible @@ -127,7 +143,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } DESCRIPTION "The index to the Trap Receiver Table." ::= { fdryTrapReceiverEntry 1 } - + fdryTrapReceiverAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create @@ -136,7 +152,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } "Trap Receiver IP address Type. Supported address types are ipv4(1) and ipv6(2)" DEFVAL { ipv4 } ::= { fdryTrapReceiverEntry 2 } - + fdryTrapReceiverAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create @@ -144,7 +160,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } DESCRIPTION "Trap Receiver IP address." ::= { fdryTrapReceiverEntry 3 } - + fdryTrapReceiverCommunityOrSecurityName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create @@ -153,7 +169,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } "Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name." ::= { fdryTrapReceiverEntry 4 } - + fdryTrapReceiverUDPPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create @@ -162,7 +178,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } "UDP port number of the trap receiver." DEFVAL { 162 } ::= { fdryTrapReceiverEntry 5 } - + fdryTrapReceiverSecurityModel OBJECT-TYPE SYNTAX SecurityModel MAX-ACCESS read-create @@ -171,7 +187,7 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } "Version of trap format to be used." DEFVAL { v1 } ::= { fdryTrapReceiverEntry 6 } - + fdryTrapReceiverSecurityLevel OBJECT-TYPE SYNTAX SecurityLevel MAX-ACCESS read-create @@ -194,5 +210,5 @@ fdryTrapReceiver OBJECT IDENTIFIER ::= { fdryTrapMIB 1 } " ::= { fdryTrapReceiverEntry 8 } - + END diff --git a/foundry/FOUNDRY-CAR-MIB.mib b/foundry/FOUNDRY-CAR-MIB.mib index 3d84404ae..cb0918903 100644 --- a/foundry/FOUNDRY-CAR-MIB.mib +++ b/foundry/FOUNDRY-CAR-MIB.mib @@ -4,7 +4,7 @@ IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Gauge32, Counter64,Integer32 FROM SNMPv2-SMI - MacAddress, TEXTUAL-CONVENTION + RowStatus,TEXTUAL-CONVENTION FROM SNMPv2-TC snSwitch FROM FOUNDRY-SN-SWITCH-GROUP-MIB @@ -12,90 +12,76 @@ IMPORTS FROM IF-MIB; snCAR MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" - - ::= { snSwitch 16} + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + ::= { snSwitch 16} snPortCARs OBJECT IDENTIFIER ::= { snCAR 1 } -- Textual Conventions - PacketSource::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + PacketSource::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " " - SYNTAX INTEGER { + SYNTAX INTEGER { input(0), --for inbound traffic output(1) --for outbound traffic } + - - RateLimitType::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + RateLimitType::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " " - SYNTAX INTEGER{ - all(3), -- all traffic. + SYNTAX INTEGER{ + all(3), -- all traffic. quickAcc(2), -- traffic matches rate-limit's access list. - standardAcc(1) -- traffic matches standard access list. + standardAcc(1) -- traffic matches standard access list. } - RateLimitAction::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + RateLimitAction::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " " SYNTAX INTEGER { - continue(1), - drop(2), + continue(1), + drop(2), precedCont(3), - precedXmit(4), - xmit(5) + precedXmit(4), + xmit(5) } - BUMPacketType::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - " - " - SYNTAX INTEGER { - unknownunicast(1), - multicast(2), - unknownunicastmulticast(3), - broadcast(4), - broadcastunknownunicast(5), - broadcastmulticast(6), - broadcastunknownunicastmulticast(7) - } snPortCARTable OBJECT-TYPE SYNTAX SEQUENCE OF SnPortCAREntry @@ -114,7 +100,7 @@ snPortCAREntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A collection of rate-limit configuration objects on this + "A collection of rate-limit configuration objects on this interface." INDEX { snPortCARifIndex, snPortCARDirection, snPortCARRowIndex } ::= { snPortCARTable 1 } @@ -150,10 +136,12 @@ SnPortCAREntry ::= snPortCARStatFilteredBytes Counter64, snPortCARStatCurBurst - Gauge32 + Gauge32, + snPortCARRowStatus + RowStatus } snPortCARifIndex OBJECT-TYPE - SYNTAX InterfaceIndex + SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION @@ -165,7 +153,7 @@ snPortCARDirection OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The input or output transmission direction for the + "The input or output transmission direction for the Rate Limit object. input (0), --for inbound traffic output(1) --for outbound traffic " @@ -203,19 +191,19 @@ snPortCARAccIdx OBJECT-TYPE snPortCARRate OBJECT-TYPE SYNTAX Integer32 - MAX-ACCESS read-only + MAX-ACCESS read-create STATUS current DESCRIPTION "The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this - rate always conforms. This is average rate in bits per + rate always conforms. This is average rate in bits per second." ::= { snPortCAREntry 6 } snPortCARLimit OBJECT-TYPE SYNTAX Integer32 - MAX-ACCESS read-only + MAX-ACCESS read-create STATUS current DESCRIPTION "This is the normal burst size that determines how large traffic @@ -261,7 +249,7 @@ snPortCARExceedAction OBJECT-TYPE STATUS current DESCRIPTION "Action to be taken when the traffic exceeds - the Rate Limit.drop + the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent @@ -318,6 +306,16 @@ snPortCARStatCurBurst OBJECT-TYPE "The current received burst size." ::= { snPortCAREntry 15 } + +snPortCARRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The variable is used to create new row in the rate limit table, only CreateAndGo(4) and destroy(6) are supported values" + ::= { snPortCAREntry 16 } + + -- end of snPortCARTable -- RL Counter Table @@ -335,7 +333,7 @@ agRateLimitCounterEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A collection of rate-limit counter objects on a + "A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface." INDEX { ifIndex, snPortCARRowIndex } ::= { agRateLimitCounterTable 1 } @@ -384,246 +382,4 @@ agRateLimitCounterTotalOctets OBJECT-TYPE "The total octet count for this rate limit entry." ::= { agRateLimitCounterEntry 4 } --- RL Counter index Table - -agRateLimitCounterIndexTable OBJECT-TYPE - SYNTAX SEQUENCE OF AgRateLimitCounterIndexEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table to map each rowindexes of rate limit counter entries to their - corresponding ACL ID (or) VLAN ID (or) VLAN Group ID." - ::= { snPortCARs 3 } - -agRateLimitCounterIndexEntry OBJECT-TYPE - SYNTAX AgRateLimitCounterIndexEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A collection of rate-limit counter objects on a - interface, direction and configuration row index within that interface." - INDEX { ifIndex, snPortCARRowIndex } - ::= { agRateLimitCounterIndexTable 1 } - -AgRateLimitCounterIndexEntry ::= - SEQUENCE { - agRateLimitCounterIndexRowIndex - INTEGER, - agRateLimitCounterIndexDirection - PacketSource, - agRateLimitCounterIndexACLID - Integer32, - agRateLimitCounterIndexVLANID - Integer32, - agRateLimitCounterIndexVLANGroupID - Integer32, - agRateLimitCounterIndexMACAddress - MacAddress - } - -agRateLimitCounterIndexRowIndex OBJECT-TYPE - SYNTAX INTEGER (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The table index for rate limit objects. - It increases as the rate limit entries are added. - Skips the number when a row is deleted." - - ::= { agRateLimitCounterIndexEntry 1 } - -agRateLimitCounterIndexDirection OBJECT-TYPE - SYNTAX PacketSource - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The input or output transmission direction for the - Rate Limit object. - input (0), --for inbound traffic - output(1) --for outbound traffic " - ::= { agRateLimitCounterIndexEntry 2 } - -agRateLimitCounterIndexACLID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The corresponding ACL ID to match with the row index of the ratelimit - counter table." - ::= { agRateLimitCounterIndexEntry 3 } - -agRateLimitCounterIndexVLANID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The corresponding VLAN ID to match with the row index of the ratelimit - counter table." - ::= { agRateLimitCounterIndexEntry 4 } - -agRateLimitCounterIndexVLANGroupID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The corresponding VLAN Group ID to match with the row index of the - ratelimit counter table." - ::= { agRateLimitCounterIndexEntry 5 } - -agRateLimitCounterIndexMACAddress OBJECT-TYPE - SYNTAX MacAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The corresponding MAC Address for Source MAC based rate limit to match - with the row index of the ratelimit counter table." - DEFVAL { '000000000000'H } - ::= { agRateLimitCounterIndexEntry 6 } - --- BUM RL Counter Table -agRateLimitBUMCounterTable OBJECT-TYPE - SYNTAX SEQUENCE OF AgRateLimitBUMCounterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table displays - The number of bytes dropped due to BUM rate-limit on the port, based on configured packet type and VLANID - Committed Burst Size(CBS) in bits - Committed Information Rate(CIR) in bits - AlertLowLevelThreshold in bits - AlertHighLevelThreshold in bits - ShutdownTimeout in minutes" - ::= { snPortCARs 4} -agRateLimitBUMCounterEntry OBJECT-TYPE - SYNTAX AgRateLimitBUMCounterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry containing the number of bytes dropped due to BUM rate-limit, followed by CBS ,CIR, AlertLowLevelThreshold, AlertHighLevelThreshold in terms of bits, and ShutdownTimeout in minutes" - INDEX { agRateLimitBUMCounterIfindex, - agRateLimitBUMCounterVLANID, - agRateLimitBUMCounterPacketType } - ::= { agRateLimitBUMCounterTable 1 } -AgRateLimitBUMCounterEntry ::= -SEQUENCE { - agRateLimitBUMCounterIfindex InterfaceIndex, - agRateLimitBUMCounterVLANID Integer32, - agRateLimitBUMCounterPacketType BUMPacketType, - agRateLimitBUMCounterDroppedOctets Counter64, - agRateLimitBUMCounterCBS Counter64, - agRateLimitBUMCounterCIR Counter64, - agRateLimitBUMCounterAlertLowLevelThreshold Counter64, - agRateLimitBUMCounterAlertHighLevelThreshold Counter64, - agRateLimitBUMCounterShutdownTimeout Integer32 -} -agRateLimitBUMCounterIfindex OBJECT-TYPE - SYNTAX InterfaceIndex - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Ifindex, a count which uniquely identifies the ports - in the chassis. Ranges from 1 to 2048" - ::= { agRateLimitBUMCounterEntry 1 } -agRateLimitBUMCounterVLANID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - " VLANID, a ID which is used to represent the - corresponding VLAN in the chassis. Ranges - from 1 to 4096" - ::= { agRateLimitBUMCounterEntry 2 } -agRateLimitBUMCounterPacketType OBJECT-TYPE - SYNTAX BUMPacketType - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - " PacketType, used to represent the type of the packet i.e. B(1) or U(2) or BU(3) or M(4) or BM(5) or UM(6) or BUM(7) U?Unknown-Unicast, B?Broadcast and M?Multicast" - ::= { agRateLimitBUMCounterEntry 3 } -agRateLimitBUMCounterDroppedOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the number of bytes dropped due to BUM rate-limit in bytes." - ::= { agRateLimitBUMCounterEntry 4 } -agRateLimitBUMCounterCBS OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the Committed Burst Size in bits." - ::= { agRateLimitBUMCounterEntry 5 } -agRateLimitBUMCounterCIR OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the Committed Information Rate in bits." - ::= { agRateLimitBUMCounterEntry 6 } -agRateLimitBUMCounterAlertLowLevelThreshold OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the configured lower threshold level in bits, to generate the Alert." - ::= { agRateLimitBUMCounterEntry 7 } -agRateLimitBUMCounterAlertHighLevelThreshold OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the configured Higher threshold level in bits, to generate the Alert." - ::= { agRateLimitBUMCounterEntry 8 } -agRateLimitBUMCounterShutdownTimeout OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " A count used to represent the Timeout value in terms of minutes, - which is the time interval after which the shutdown port will - be enabled." - ::= { agRateLimitBUMCounterEntry 9 } --- end of RL Counter Table -snBUMRLNotifications OBJECT IDENTIFIER ::= { snPortCARs 5 } -snTrapBUMratelimitAlertLowThreshold NOTIFICATION-TYPE - OBJECTS { - agRateLimitBUMCounterCIR, - agRateLimitBUMCounterAlertLowLevelThreshold - } - STATUS current - DESCRIPTION - "A snTrapBUMratelimitAlertLowThreshold trap signifies that the - ingress packets interms of bits have reached the configured - low level threshold." - ::= { snBUMRLNotifications 1 } -snTrapBUMratelimitAlertHighThreshold NOTIFICATION-TYPE - OBJECTS { - agRateLimitBUMCounterCIR, - agRateLimitBUMCounterAlertHighLevelThreshold - } - STATUS current - DESCRIPTION - "A snTrapBUMratelimitAlertHighThreshold trap signifies that the - ingress packets interms of bits, have reached the configured - high level threshold." - ::= { snBUMRLNotifications 2 } -snTrapBUMratelimitShutdownLinkDown NOTIFICATION-TYPE - OBJECTS { - agRateLimitBUMCounterCIR - } - STATUS current - DESCRIPTION - "A snTrapBUMratelimitShutdownLinkDown trap signifies that the - port is shutdown after reaching the configured CIR in bps." - ::= { snBUMRLNotifications 3 } -snTrapBUMratelimitShutdownLinkUp NOTIFICATION-TYPE - OBJECTS { - agRateLimitBUMCounterCIR - } - STATUS current - DESCRIPTION - "A snTrapBUMratelimitAlertHighThreshold trap signifies that the - port is UP after the specified shutdown timeout in minutes." - ::= { snBUMRLNotifications 4 } END diff --git a/foundry/FOUNDRY-DHCPSERVER-MIB.mib b/foundry/FOUNDRY-DHCPSERVER-MIB.mib new file mode 100644 index 000000000..8dd7b40aa --- /dev/null +++ b/foundry/FOUNDRY-DHCPSERVER-MIB.mib @@ -0,0 +1,546 @@ +FOUNDRY-DHCPSERVER-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, IpAddress, Integer32, + TimeTicks, Counter32 + FROM SNMPv2-SMI + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + RowStatus, MacAddress + FROM SNMPv2-TC; + +snDhcpServer MODULE-IDENTITY + LAST-UPDATED "201808070000Z" -- Aug 7, 2018 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "201808070000Z" -- Aug 7, 2018 + DESCRIPTION + "convert from SMIv1 to SMIv2" + REVISION "201808070000Z" -- Aug 7, 2018 + DESCRIPTION + "Initial Version" + ::= { snSwitch 42 } + +-- +-- Define the DHCP Server Tables. +-- + snDhcpServerGlobalObjects OBJECT IDENTIFIER ::= { snDhcpServer 1 } + snDhcpServerTableObjects OBJECT IDENTIFIER ::= { snDhcpServer 2 } + +-- ================================================================= +-- DHCPv4 Server Global Scalar Object Section +-- ================================================================= + +snDhcpServerGlobalConfigState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure state for DHCPv4 server on the global level. + enabled: DHCPv4 server is enabled + disabled: DHCPv4 server is disabled + Note: DHCPv4 client should be disabled when enabling DHCPv4 server" + ::= { snDhcpServerGlobalObjects 1} + + +-- ================================================================= +-- 1st Table of DHCPServerTables: DHCPSrvGlobalPoolConfigTable +-- ================================================================= + snDhcpServerPoolConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnDhcpServerPoolConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing the configurations of dhcp + server global pools." + ::= { snDhcpServerTableObjects 1 } + + snDhcpServerPoolConfigEntry OBJECT-TYPE + SYNTAX SnDhcpServerPoolConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the objects for configuring + the network ip or host ip etc. to global pools for + DHCP server." + INDEX { snDhcpServerPoolName } + ::= { snDhcpServerPoolConfigTable 1 } + + SnDhcpServerPoolConfigEntry ::= + SEQUENCE + { + snDhcpServerPoolName OCTET STRING, + snDhcpServerPoolNetwork IpAddress, + snDhcpServerPoolNetworkMask IpAddress, + snDhcpServerPoolStartAddr IpAddress, + snDhcpServerPoolEndAddr IpAddress, + snDhcpServerPoolLeaseDay Integer32, + snDhcpServerPoolLeaseHour Integer32, + snDhcpServerPoolLeaseMinute Integer32, + snDhcpServerPoolDeploy INTEGER, + snDhcpServerPoolRowStatus INTEGER + } + + snDhcpServerPoolName OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..255)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "DHCP server global pool name." + ::= { snDhcpServerPoolConfigEntry 1 } + + snDhcpServerPoolNetwork OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Network ip of a DHCP global pool." + ::= { snDhcpServerPoolConfigEntry 2 } + + snDhcpServerPoolNetworkMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Net mask of a DHCP global pool(network)." + ::= { snDhcpServerPoolConfigEntry 3 } + + snDhcpServerPoolStartAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Start IP of a DHCP global pool." + ::= { snDhcpServerPoolConfigEntry 4 } + + snDhcpServerPoolEndAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "End ip of a DHCP global pool." + ::= { snDhcpServerPoolConfigEntry 5 } + + snDhcpServerPoolLeaseDay OBJECT-TYPE + SYNTAX Integer32(0..365) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of days of the lease." + DEFVAL { 1 } + ::= { snDhcpServerPoolConfigEntry 6 } + + snDhcpServerPoolLeaseHour OBJECT-TYPE + SYNTAX Integer32(0..23) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of hours of the lease." + DEFVAL { 0 } + ::= { snDhcpServerPoolConfigEntry 7 } + + snDhcpServerPoolLeaseMinute OBJECT-TYPE + SYNTAX Integer32(0..59) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of minutes of the lease." + DEFVAL { 0 } + ::= { snDhcpServerPoolConfigEntry 8 } + + snDhcpServerPoolDeploy OBJECT-TYPE + SYNTAX INTEGER + { + nodeploy(0), + deploy(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flag of undo operation for DHCPSrvGlobalPoolConfigTable." + ::= { snDhcpServerPoolConfigEntry 9 } + + snDhcpServerPoolRowStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + other(1)....some other case + valid(2)....the row exists and is valid" + ::= { snDhcpServerPoolConfigEntry 10 } + +-- ================================================================= +-- 2nd Table of DHCPServerTables: DHCPSrvGlobalPoolOptionTable +-- ================================================================= + snDhcpServerPoolOptionConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnDhcpServerPoolOptionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring options to DHCP global pools." + ::= { snDhcpServerTableObjects 2 } + + snDhcpServerPoolOptionConfigEntry OBJECT-TYPE + SYNTAX SnDhcpServerPoolOptionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the objects for configuring + options to DHCP global pools." + INDEX { snDhcpServerPoolName, snDhcpServerPoolOptionCode } + ::= { snDhcpServerPoolOptionConfigTable 1 } + + SnDhcpServerPoolOptionConfigEntry ::= + SEQUENCE + { + snDhcpServerPoolOptionCode Integer32, + snDhcpServerPoolOptionType INTEGER, + snDhcpServerPoolOptionAscii OCTET STRING, + snDhcpServerPoolOptionHexString OCTET STRING, + snDhcpServerPoolOptionIPString OCTET STRING, + snDhcpServerPoolOptionRowStatus RowStatus, + snDhcpServerPoolOptionBoolString OCTET STRING, + snDhcpServerPoolOptionIntString OCTET STRING, + snDhcpServerPoolOptionIPAddrPairString OCTET STRING, + snDhcpServerPoolOptionStaticRouteString OCTET STRING, + snDhcpServerPoolOptionSlpDirAgentString OCTET STRING, + snDhcpServerPoolOptionSlpSrvScopeString OCTET STRING, + snDhcpServerPoolOptionPxeIntfIdString OCTET STRING, + snDhcpServerPoolOptionPxeClientIdString OCTET STRING + } + + snDhcpServerPoolOptionCode OBJECT-TYPE + SYNTAX Integer32 (1..254) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Option code." + ::= { snDhcpServerPoolOptionConfigEntry 1 } + + snDhcpServerPoolOptionType OBJECT-TYPE + SYNTAX INTEGER + { + ascii(0), + hex(1), + ip(2), + bool(3), + integer(4), + telephony(5), + ipaddrpair(6), + staticroute(7), + slpdiragent(8), + slpsrvscope(9), + pxeintfid(10), + pxeclientid(11) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Option type." + ::= { snDhcpServerPoolOptionConfigEntry 2 } + + snDhcpServerPoolOptionAscii OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Ascii string of an option." + ::= { snDhcpServerPoolOptionConfigEntry 3 } + + snDhcpServerPoolOptionHexString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Hex string of an option. 1st to 16th hex strings, + which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, + can be configured at most simultaneously. + That means the format of each string + must be '12', '1234', '123456' or '12345678'." + ::= { snDhcpServerPoolOptionConfigEntry 4 } + + snDhcpServerPoolOptionIPString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(4..12)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Ip string of an option. 1 to 3 ip addresses can + be configured at most simultaneously." + ::= { snDhcpServerPoolOptionConfigEntry 5 } + + snDhcpServerPoolOptionRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus. Three actions are used: active, + createAndGo, destroy." + ::= { snDhcpServerPoolOptionConfigEntry 6 } + + snDhcpServerPoolOptionBoolString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(4..12)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Bool string of an option." + ::= { snDhcpServerPoolOptionConfigEntry 7 } + + snDhcpServerPoolOptionIntString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(4..12)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Int string of an option" + ::= { snDhcpServerPoolOptionConfigEntry 8 } + + snDhcpServerPoolOptionIPAddrPairString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(8..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Ip address pair (ip address & mask) string of option + policy-filter(21).Two sets of destination address and subnet + mask can be configured at most simultaneously." + ::= { snDhcpServerPoolOptionConfigEntry 9 } + + snDhcpServerPoolOptionStaticRouteString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(8..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Ip address pair (detination & route) string of option + static-route(33). Two sets of destination address and static + route of the destination address can be configured at most + simultaneously." + ::= { snDhcpServerPoolOptionConfigEntry 10 } + + snDhcpServerPoolOptionSlpDirAgentString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..54)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This option specifies the location of one or more SLP + Directory Agents. The SLP Directory Agent Option specifies a list + of IP addresses for Directory Agents. + Directory Agents MUST be listed in order of + preference, if there is an order of preference. + The first byte in the Directory Agent option may be set to + either 0 or 1 (false or true). If it is set to 1, + the SLP User Agent or Service Agent so configured MUST NOT employ + either active or passive multicast discovery of Directory Agents. + maximum of three SLP Directory Agents can be configured. + + The output of the object in the format + 'false xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' or + 'true xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx' " + ::= { snDhcpServerPoolOptionConfigEntry 11 } + + snDhcpServerPoolOptionSlpSrvScopeString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..135)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The scope list is a comma delimited list which indicates + the scopes that a SLP Agent is configured to use. + The first byte determines (0 or 1) whether SLP Agents override their + static configuration for scopes with the string provided + by the option. This allows DHCP administrators to implement a policy + of assigning a set of scopes to Agents for service provision. If the + Mandatory byte is 0, static configuration takes precedence over the + DHCP provided scope list. If the Mandatory byte is 1, the provided in this option MUST be used by the SLP Agent. + + The maximum size of service scopes list is 128 bytes. + + The output of the object in the format + 'false slp-agent1:slp-agent2:slp-agent3:..' or + 'true slp-agent1:slp-agent2:slp-agent3:..'" + ::= { snDhcpServerPoolOptionConfigEntry 12 } + + snDhcpServerPoolOptionPxeIntfIdString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..3)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object refers the value of PXE interface Id value. + First Octet encodes a network interface type. For now the only + supported value is 1 for Universal Network Device Interface (UNDI). + second and third bytes describe the interface revision." + ::= { snDhcpServerPoolOptionConfigEntry 13 } + + snDhcpServerPoolOptionPxeClientIdString OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..132)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object refers the value of PXE client id string. + + First byte describes the type of the machine identifier in the + remaining octets in this option. 0 (zero) is the only value defined + for this octet at the present time, and it describes the remaining + octets as a Globally Unique Identifier (GUID). + The maximum size of client id string is 128 bytes." + ::= { snDhcpServerPoolOptionConfigEntry 14 } + +-- ================================================================= +-- 3rd Table of snDhcpServerTableObjects : snDhcpServerPoolExcludedSingleAddressTable +-- ================================================================= + snDhcpServerPoolExcludedSingleAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnDhcpServerPoolExcludedSingleAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring single excluded address to DHCP server address pools." + ::= { snDhcpServerTableObjects 3 } + + snDhcpServerPoolExcludedSingleAddressEntry OBJECT-TYPE + SYNTAX SnDhcpServerPoolExcludedSingleAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the objects for configuring + single excluded address to DHCP server address pools." + INDEX { snDhcpServerPoolName , snDhcpServerPoolExcludedAddressIndex } + ::= { snDhcpServerPoolExcludedSingleAddressTable 1 } + + SnDhcpServerPoolExcludedSingleAddressEntry ::= + SEQUENCE + { + snDhcpServerPoolExcludedAddressIndex Integer32, + snDhcpServerPoolExcludedSingleAddress IpAddress, + snDhcpServerPoolExcludedSingleAddressRowStatus RowStatus + } + + snDhcpServerPoolExcludedAddressIndex OBJECT-TYPE + SYNTAX Integer32 (1..128) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Excluded Address Index." + ::= { snDhcpServerPoolExcludedSingleAddressEntry 1 } + + + snDhcpServerPoolExcludedSingleAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " Single address excluded from the address pool." + ::= { snDhcpServerPoolExcludedSingleAddressEntry 2 } + + + snDhcpServerPoolExcludedSingleAddressRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus. Three actions are used: active, + createAndGo, destroy." + ::= { snDhcpServerPoolExcludedSingleAddressEntry 3 } + +-- ================================================================= +-- 4th Table of snDhcpServerTableObjects : snDhcpServerPoolExcludedAddressRangeTable +-- ================================================================= + snDhcpServerPoolExcludedAddressRangeTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnDhcpServerPoolExcludedAddressRangeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring excluded address range to DHCP server address pools." + ::= { snDhcpServerTableObjects 4 } + + snDhcpServerPoolExcludedAddressRangeEntry OBJECT-TYPE + SYNTAX SnDhcpServerPoolExcludedAddressRangeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the objects for configuring + excluded address and excluded address range to DHCP server address pools." + INDEX { snDhcpServerPoolName , snDhcpServerPoolExcludedAddressRangeIndex } + ::= { snDhcpServerPoolExcludedAddressRangeTable 1 } + + SnDhcpServerPoolExcludedAddressRangeEntry ::= + SEQUENCE + { + snDhcpServerPoolExcludedAddressRangeIndex Integer32, + snDhcpServerPoolExcludedStartAddress IpAddress, + snDhcpServerPoolExcludedEndAddress IpAddress, + snDhcpServerPoolExcludedAddressRowStatus RowStatus + } + + snDhcpServerPoolExcludedAddressRangeIndex OBJECT-TYPE + SYNTAX Integer32 (1..85) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Excluded address range index." + ::= { snDhcpServerPoolExcludedAddressRangeEntry 1 } + + snDhcpServerPoolExcludedStartAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Start addresses of the excluded from the address pool." + ::= { snDhcpServerPoolExcludedAddressRangeEntry 2 } + + snDhcpServerPoolExcludedEndAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "End addresses of the excluded from the address pool." + ::= { snDhcpServerPoolExcludedAddressRangeEntry 3 } + + snDhcpServerPoolExcludedAddressRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "RowStatus. Three actions are used: active, + createAndGo, destroy." + ::= { snDhcpServerPoolExcludedAddressRangeEntry 4 } + +END diff --git a/foundry/FOUNDRY-IP-SOURCE-GUARD-MIB.mib b/foundry/FOUNDRY-IP-SOURCE-GUARD-MIB.mib deleted file mode 100644 index 46c2b4054..000000000 --- a/foundry/FOUNDRY-IP-SOURCE-GUARD-MIB.mib +++ /dev/null @@ -1,263 +0,0 @@ -FOUNDRY-IP-SOURCE-GUARD-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress - FROM SNMPv2-SMI - snSwitch - FROM FOUNDRY-SN-SWITCH-GROUP-MIB - TruthValue, RowStatus, TEXTUAL-CONVENTION - FROM SNMPv2-TC - VlanIndex - FROM Q-BRIDGE-MIB - ifIndex, InterfaceIndex - FROM IF-MIB; - -fdryIpSrcGuardMIB MODULE-IDENTITY - LAST-UPDATED "201007260000Z" -- July 26, 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Management Information for configuration of IP Source Guard feature. - IP Source Guard is a security feature that restricts IP traffic on untrusted - ports by filtering traffic based on the DHCP snooping binding database or - manually configured IP source bindings. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201007260000Z" -- July 26, 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "201002220000Z" -- February 22, 2010 - DESCRIPTION - "" - ::= { snSwitch 37} - -BindMode ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Represents mode of the IP Source Guard entry." - SYNTAX INTEGER { - other(1), - active(2), - inactive(3) - } - -BindType ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Represents type of the IP Source Guard entry." - SYNTAX INTEGER { - other(1), - ip(2) - } - -fdryIpSrcGuardInterface OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 1 } -fdryIpSrcGuardPortVlan OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 2 } -fdryIpSrcGuardBind OBJECT IDENTIFIER ::= { fdryIpSrcGuardMIB 3 } - --- --- IP Source Guard Interface configuration table --- - -fdryIpSrcGuardIfConfigTable OBJECT-TYPE - SYNTAX SEQUENCE OF FdryIpSrcGuardIfConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table provides the mechanism to configure enabling or disabling - IP Source Guard purpose at each physical interface." - ::= { fdryIpSrcGuardInterface 1 } - -fdryIpSrcGuardIfConfigEntry OBJECT-TYPE - SYNTAX FdryIpSrcGuardIfConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row instance contains the configuration to enable or disable IP - Source Guard at each physical interface capable of this feature." - INDEX { ifIndex } - ::= { fdryIpSrcGuardIfConfigTable 1 } - -FdryIpSrcGuardIfConfigEntry ::= SEQUENCE { - fdryIpSrcGuardIfEnable - TruthValue - } - -fdryIpSrcGuardIfEnable OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object indicates whether IP Source Guard is - enabled at this interface. - If this object is set to 'true', IP Source Guard is enabled. - Traffic coming to this interface will be forwarded. If it is - from the list of IP addresses obtained from DHCP snooping. - Otherwise it is denied. - If this object is set to 'false', IP Source Guard is disabled." - ::= { fdryIpSrcGuardIfConfigEntry 1 } - --- --- IP Source Guard per-port-per-VLAN configuration table --- - -fdryIpSrcGuardPortVlanConfigTable OBJECT-TYPE - SYNTAX SEQUENCE OF FdryIpSrcGuardPortVlanConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table provides the mechanism to configure enabling or disabling - IP Source Guard purpose per port per VLAN." - ::= { fdryIpSrcGuardPortVlan 1 } - -fdryIpSrcGuardPortVlanConfigEntry OBJECT-TYPE - SYNTAX FdryIpSrcGuardPortVlanConfigEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row instance contains the configuration to enable or disable IP - Source Guard per port per VLAN of this feature." - INDEX { fdryIpSrcGuardPortVlanPortId, fdryIpSrcGuardPortVlanVlanId } - ::= { fdryIpSrcGuardPortVlanConfigTable 1 } - -FdryIpSrcGuardPortVlanConfigEntry ::= SEQUENCE { - fdryIpSrcGuardPortVlanPortId - InterfaceIndex, - fdryIpSrcGuardPortVlanVlanId - VlanIndex, - fdryIpSrcGuardPortVlanEnable - TruthValue - } - -fdryIpSrcGuardPortVlanPortId OBJECT-TYPE - SYNTAX InterfaceIndex - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The ifIndex of the port for IP Source Guard purpose per port per VLAN." - ::= { fdryIpSrcGuardPortVlanConfigEntry 1 } - -fdryIpSrcGuardPortVlanVlanId OBJECT-TYPE - SYNTAX VlanIndex - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The number of VLAN for IP Source Guard purpose per port per VLAN." - ::= { fdryIpSrcGuardPortVlanConfigEntry 2 } - -fdryIpSrcGuardPortVlanEnable OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object indicates whether IP Source Guard is - enabled at this interface and this VLAN number. - If this object is set to 'true', IP Source Guard per-port-per-VLAN is enabled. - If this object is set to 'false', IP Source Guard per-port-per-VLAN is disabled." - ::= { fdryIpSrcGuardPortVlanConfigEntry 3 } - --- --- IP Source Guard binding table --- Use this table to configure Ip source entries --- - -fdryIpSrcGuardBindTable OBJECT-TYPE - SYNTAX SEQUENCE OF FdryIpSrcGuardBindEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table provides the information of IP addresses used IP Source - Guard purpose at each physical interface with or without specific VLAN - memberships " - ::= { fdryIpSrcGuardBind 1 } - -fdryIpSrcGuardBindEntry OBJECT-TYPE - SYNTAX FdryIpSrcGuardBindEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row instance contains IP address used for IP Source Guard purpose - at each physical interface with or without specific VLAN memberships ." - INDEX { ifIndex, fdryIpSrcGuardBindIpAddr } - ::= { fdryIpSrcGuardBindTable 1 } - -FdryIpSrcGuardBindEntry ::= SEQUENCE { - fdryIpSrcGuardBindIpAddr - IpAddress, - fdryIpSrcGuardBindVlanId - Unsigned32, - fdryIpSrcGuardBindRowStatus - RowStatus, - fdryIpSrcGuardBindMode - BindMode, - fdryIpSrcGuardBindType - BindType - } - -fdryIpSrcGuardBindIpAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The device IP address." - ::= { fdryIpSrcGuardBindEntry 1} - -fdryIpSrcGuardBindVlanId OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object indicates the specific VLAN memberships on this interface. - The VLAN number is optional. If you configure a VLAN number, the bindings - applies to that VLAN only. If you do not configure a VLAN number, the static - applies to all VLANs associated with the port. In this case, the VLAN number - will be displayed as 0." - ::= { fdryIpSrcGuardBindEntry 2 } - -fdryIpSrcGuardBindRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable is used to create, or - delete a row in this table. When a row in this - table is in active(1) state, no objects in that row - can be modified except this object." - ::= { fdryIpSrcGuardBindEntry 3 } - -fdryIpSrcGuardBindMode OBJECT-TYPE - SYNTAX BindMode - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The mode of the IP Source Guard entry" - ::= { fdryIpSrcGuardBindEntry 4 } - -fdryIpSrcGuardBindType OBJECT-TYPE - SYNTAX BindType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of the IP Source Guard entry" - ::= { fdryIpSrcGuardBindEntry 5 } - - - END - diff --git a/foundry/FOUNDRY-LAG-MIB.mib b/foundry/FOUNDRY-LAG-MIB.mib index 29ff4b0bc..d3c84232a 100644 --- a/foundry/FOUNDRY-LAG-MIB.mib +++ b/foundry/FOUNDRY-LAG-MIB.mib @@ -5,52 +5,51 @@ IMPORTS FROM SNMPv2-SMI -- [RFC2578] InterfaceIndex, ifIndex, InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] - DisplayString, RowStatus + DisplayString, RowStatus, MacAddress FROM SNMPv2-TC -- [RFC2579] - snSwitch, snTraps - FROM FOUNDRY-SN-ROOT-MIB + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB PhysAddress FROM FOUNDRY-SN-SWITCH-GROUP-MIB; fdryLinkAggregationGroupMIB MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" DESCRIPTION - "Management Information Base module for link aggregate group - configuration and statistics. Link aggregation group is a new concept - of trunk and this MIB is replacing FOUNDRY-SN-LAG-MIB in MLX/XMR products - starting release 4.1.0. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION - "convert from SMIv1 to SMIv2" + " + Management Information Base module for link aggregate group + configuration and statistics. Link aggregation group is a new concept + of trunk and this MIB is replacing FOUNDRY-SN-LAG-MIB in MLX/XMR products + starting release 4.1.0. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION + "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { snSwitch 33 } -fdryLinkAggregationGroupNotifyObjects OBJECT IDENTIFIER ::= { fdryLinkAggregationGroupMIB 0 } fdryLinkAggregationGroupTableObjects OBJECT IDENTIFIER ::= { fdryLinkAggregationGroupMIB 1 } fdryLinkAggregationGroupPortTableObjects OBJECT IDENTIFIER ::= { fdryLinkAggregationGroupMIB 2 } fdryLinkAggregationGroupLacpPortTableObjects OBJECT IDENTIFIER ::= { fdryLinkAggregationGroupMIB 3 } @@ -81,30 +80,32 @@ fdryLinkAggregationGroupEntry OBJECT-TYPE ::= { fdryLinkAggregationGroupTable 1 } FdryLinkAggregationGroupEntry ::= SEQUENCE { - fdryLinkAggregationGroupName DisplayString, - fdryLinkAggregationGroupType INTEGER, + fdryLinkAggregationGroupName DisplayString, + fdryLinkAggregationGroupType INTEGER, fdryLinkAggregationGroupAdminStatus INTEGER, - fdryLinkAggregationGroupIfList OCTET STRING, - fdryLinkAggregationGroupPrimaryPort InterfaceIndexOrZero, - fdryLinkAggregationGroupTrunkType INTEGER, - fdryLinkAggregationGroupTrunkThreshold Unsigned32, + fdryLinkAggregationGroupIfList OCTET STRING, + fdryLinkAggregationGroupPrimaryPort InterfaceIndexOrZero, + fdryLinkAggregationGroupTrunkType INTEGER, + fdryLinkAggregationGroupTrunkThreshold Unsigned32, fdryLinkAggregationGroupLacpTimeout INTEGER, - fdryLinkAggregationGroupIfIndex InterfaceIndexOrZero, - fdryLinkAggregationGroupPortCount Unsigned32, - fdryLinkAggregationGroupRowStatus RowStatus, - fdryLinkAggregationGroupId Unsigned32 + fdryLinkAggregationGroupIfIndex InterfaceIndexOrZero, + fdryLinkAggregationGroupPortCount Unsigned32, + fdryLinkAggregationGroupRowStatus RowStatus, + fdryLinkAggregationGroupId Unsigned32, + fdryLinkAggregationGroupLacpMode Unsigned32, + fdryLinkAggregationGroupLagMac MacAddress } fdryLinkAggregationGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) - MAX-ACCESS not-accessible + MAX-ACCESS read-create STATUS current DESCRIPTION "Name of a LinkAggregationGroup." ::= { fdryLinkAggregationGroupEntry 1 } fdryLinkAggregationGroupType OBJECT-TYPE - SYNTAX INTEGER { static(1), dynamic(2), keepalive(3) } + SYNTAX INTEGER { static(1), dynamic(2), keepalive(3), auto(4), spx(5) } MAX-ACCESS read-create STATUS current DESCRIPTION @@ -112,19 +113,21 @@ fdryLinkAggregationGroupType OBJECT-TYPE ::= { fdryLinkAggregationGroupEntry 2 } fdryLinkAggregationGroupAdminStatus OBJECT-TYPE - SYNTAX INTEGER { deploy(1), deployPassive(2), undeploy(3), undeployForced(4) } + SYNTAX INTEGER { deploy(1), deployPassive(2), undeploy(3), undeployForced(4), other(5) } MAX-ACCESS read-create - STATUS current + STATUS deprecated DESCRIPTION - "The desired deplyed state of this LinkAggregationGroup entry. - This is not the operational status. Refer to ifTable for the + "The desired deplyed state of this LinkAggregationGroup entry. + This is not the operational status. Refer to ifTable for the operational status. deploy(1).............deploy the LAG and set to LACP active if dynamic LAG. deployPassive(2)..deploy the LAG and set to LACP passive if dynamic LAG. undeploy(3).........undeploy the LAG if no more than 2 ports are enabled. undeployForced(4)..undeploy the LAG regardless number of ports enabled. This is a write-only value. - In particular, a row cannot be deployed until the corresponding + other(5)..................FI products will not support LAG deploy option. + This is a write-only value. + In particular, a row cannot be deployed until the corresponding instances of fdryLinkAggregationGroupIfList has been set." ::= { fdryLinkAggregationGroupEntry 3 } @@ -141,21 +144,23 @@ fdryLinkAggregationGroupIfList OBJECT-TYPE fdryLinkAggregationGroupPrimaryPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create - STATUS current + STATUS deprecated DESCRIPTION "The primary port for the Link Aggregation Group. This must be set before deploying the LinkAggregateGroup unless this is - a keepalive LinkAggregateGroup. Zero will be returned - for primary ports not set" + a keepalive LinkAggregateGroup. Zero will be returned + for primary ports not set. This object will not be used in FI + products from 8.0.61 onwards" ::= { fdryLinkAggregationGroupEntry 5 } fdryLinkAggregationGroupTrunkType OBJECT-TYPE - SYNTAX INTEGER { hashBased(1), perPacket(2) } + SYNTAX INTEGER { hashBased(1), perPacket(2), resilient-hash(3) } MAX-ACCESS read-create - STATUS current + STATUS current DESCRIPTION "The trunk connection type which specifies what the scheme - of load-sharing among the trunk ports is." + of load-sharing among the trunk ports is. Supported only on + SWDR & TNTO platforms." ::= { fdryLinkAggregationGroupEntry 6 } fdryLinkAggregationGroupTrunkThreshold OBJECT-TYPE @@ -183,7 +188,7 @@ fdryLinkAggregationGroupIfIndex OBJECT-TYPE DESCRIPTION "After deployment the operation information of a LAG entry will be represented in an entry in ifTable. Use this variable as the ifIndex - to access the entry in ifTable and ifXTable. Zero will be returned + to access the entry in ifTable and ifXTable. Zero will be returned for LAGs not yet deployed." ::= { fdryLinkAggregationGroupEntry 9 } @@ -202,25 +207,47 @@ fdryLinkAggregationGroupRowStatus OBJECT-TYPE DESCRIPTION "The status of this conceptual row. - createAndWait(5) is not supported. + Only createAndGo (4) & destroy(6) is supported. To create a row in this table, a manager must set this object to createAndGo(4) together with the setting of - fdryLinkAggregationGroupType. After that the row status becomes - active(1) regardless the LAG entry is deployed or not. - - To deploy the LAG entry, set the corresponding instance of - fdryLinkAggregationGroupAdminStatus to deployActive or deployPassive." + fdryLinkAggregationGroupType. fdryLinkAggregationGroupId is + optional. After that the row status becomes active(1) regardless + the LAG entry is deployed or not." ::= { fdryLinkAggregationGroupEntry 11 } +--modified as part of VALG enhancement + fdryLinkAggregationGroupId OBJECT-TYPE SYNTAX Unsigned32 - MAX-ACCESS read-only + MAX-ACCESS read-write STATUS current DESCRIPTION "The numeric identifier assigned to this LAG." ::= { fdryLinkAggregationGroupEntry 12 } +-- folloing two objects are added as part of VLAG enhancement +fdryLinkAggregationGroupLacpMode OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The LACP mode value this LAG will use. Applicable for + dynamic and keepalive LAG only. + 0- lacp mode not supported + 1- lacp mode active + 2- lacp mode passive + for static and spx lag lacp mode will be 0" + ::= { fdryLinkAggregationGroupEntry 13 } + +fdryLinkAggregationGroupLagMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address assigned for LAG interface. + Format of mac address will be HHHH.HHHH.HHHH." + ::= { fdryLinkAggregationGroupEntry 14 } -- -- LinkAggregationGroupPort Table -- @@ -228,7 +255,7 @@ fdryLinkAggregationGroupId OBJECT-TYPE fdryLinkAggregationGroupPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryLinkAggregationGroupPortEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "A table that contains Link Aggregation Control configuration information about every @@ -239,7 +266,7 @@ fdryLinkAggregationGroupPortTable OBJECT-TYPE fdryLinkAggregationGroupPortEntry OBJECT-TYPE SYNTAX FdryLinkAggregationGroupPortEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry of the Link Aggregate Group Port table." INDEX { fdryLinkAggregationGroupName, ifIndex } @@ -252,47 +279,13 @@ FdryLinkAggregationGroupPortEntry ::= SEQUENCE { fdryLinkAggregationGroupPortLacpPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "The LACP priority value assigned to this link aggregation port. Applicable + "The LACP priority value assigned to this link aggregation port. Applicable for dynamic and keepalive LAG only." DEFVAL { 1 } ::= { fdryLinkAggregationGroupPortEntry 1 } -fdryLAGName OBJECT-TYPE - SYNTAX DisplayString (SIZE(1..64)) - MAX-ACCESS accessible-for-notify - STATUS current - DESCRIPTION - "Name of a LinkAggregationGroup." - ::= { fdryLinkAggregationGroupNotifyObjects 1 } - -fdryTrapLagDeployed NOTIFICATION-TYPE - OBJECTS { fdryLAGName, - fdryLinkAggregationGroupIfIndex } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when a LAG is deployed." - --#TYPE "Foundry Trap: LAG deployed" - --#SUMMARY "LAG %s deployed" - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1204 } - -fdryTrapLagUndeployed NOTIFICATION-TYPE - OBJECTS { fdryLAGName, - fdryLinkAggregationGroupIfIndex } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when a LAG is undeployed." - --#TYPE "Foundry Trap: LAG undeployed" - --#SUMMARY "LAG %s undeployed" - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1205 } - -- -- LinkAggregationGroupLacpPort Table -- @@ -318,13 +311,13 @@ fdryLinkAggregationGroupLacpPortEntry OBJECT-TYPE ::= { fdryLinkAggregationGroupLacpPortTable 1 } FdryLinkAggregationGroupLacpPortEntry ::= SEQUENCE { - fdryLinkAggregationGroupLacpPortAdminStatus INTEGER, - fdryLinkAggregationGroupLacpPortLinkStatus INTEGER, - fdryLinkAggregationGroupLacpPortLacpStatus INTEGER, - fdryLinkAggregationGroupLacpPortLacpSysID PhysAddress, - fdryLinkAggregationGroupLacpPortLacpKey INTEGER, - fdryLinkAggregationGroupLacpPortLacpRemoteSysID PhysAddress, - fdryLinkAggregationGroupLacpPortLacpRemoteKey INTEGER + fdryLinkAggregationGroupLacpPortAdminStatus INTEGER, + fdryLinkAggregationGroupLacpPortLinkStatus INTEGER, + fdryLinkAggregationGroupLacpPortLacpStatus INTEGER, + fdryLinkAggregationGroupLacpPortLacpSysID PhysAddress, + fdryLinkAggregationGroupLacpPortLacpKey INTEGER, + fdryLinkAggregationGroupLacpPortLacpRemoteSysID PhysAddress, + fdryLinkAggregationGroupLacpPortLacpRemoteKey INTEGER } fdryLinkAggregationGroupLacpPortAdminStatus OBJECT-TYPE diff --git a/foundry/FOUNDRY-MPLS-MIB.mib b/foundry/FOUNDRY-MPLS-MIB.mib index 168b6e9ae..97331ef3e 100644 --- a/foundry/FOUNDRY-MPLS-MIB.mib +++ b/foundry/FOUNDRY-MPLS-MIB.mib @@ -10,8 +10,10 @@ IMPORTS FROM SNMPv2-SMI DisplayString, TimeStamp, RowStatus FROM SNMPv2-TC - snMpls, snTraps + snMpls FROM FOUNDRY-SN-ROOT-MIB + snTraps + FROM FOUNDRY-SN-NOTIFICATION-MIB TruthValue,TEXTUAL-CONVENTION FROM SNMPv2-TC ClassOfService diff --git a/foundry/FOUNDRY-POE-MIB.mib b/foundry/FOUNDRY-POE-MIB.mib deleted file mode 100644 index f8d47aee3..000000000 --- a/foundry/FOUNDRY-POE-MIB.mib +++ /dev/null @@ -1,325 +0,0 @@ -FOUNDRY-POE-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, - Integer32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] - DisplayString FROM SNMPv2-TC -- [RFC2579] - InterfaceIndex FROM IF-MIB - snAgentSys FROM FOUNDRY-SN-ROOT-MIB - ; - -snAgentPoe MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "The Brocade proprietary MIB module for Power Over Ethernet(PoE) - It has PoE port and module configuring information. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION "Changed INTEGER to Integer32" - - REVISION "200904030000Z" -- 3 April 2009 - DESCRIPTION "Initial version, snAgentPoePortTable which was in SNMPv1 written in SNMPv2-SMI." - - ::= { snAgentSys 14 } - --- Power Over Ethernet MIB Group - -snAgentPoeGbl OBJECT IDENTIFIER ::= { snAgentPoe 1 } -snAgentPoePort OBJECT IDENTIFIER ::= { snAgentPoe 2 } -snAgentPoeModule OBJECT IDENTIFIER ::= { snAgentPoe 3 } -snAgentPoeUnit OBJECT IDENTIFIER ::= { snAgentPoe 4 } - - --- Power Over Ethernet Global Objects - -snAgentPoeGblPowerCapacityTotal OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows the total inline power capacity available in the device, measured in mWatts. " - ::= { snAgentPoeGbl 1 } - -snAgentPoeGblPowerCapacityFree OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows the inline power capacity currently available in the device which is unallocated, measured in mWatts." - ::= { snAgentPoeGbl 2 } - -snAgentPoeGblPowerAllocationsRequestsHonored OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows number of times the inline power allocations requests honored." - ::= { snAgentPoeGbl 3} - - --- Power Over Ethernet Port Table - -snAgentPoePortTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentPoePortEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of POE port information." - ::= { snAgentPoePort 2 } - -snAgentPoePortEntry OBJECT-TYPE - SYNTAX SnAgentPoePortEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row in the POE port table." - INDEX { snAgentPoePortNumber } - ::= { snAgentPoePortTable 1 } - -SnAgentPoePortEntry ::= SEQUENCE { - snAgentPoePortNumber - InterfaceIndex, - snAgentPoePortControl - INTEGER, - snAgentPoePortWattage - Integer32, - snAgentPoePortClass - Integer32, - snAgentPoePortPriority - INTEGER, - snAgentPoePortConsumed - Integer32, - snAgentPoePortType - DisplayString - } - -snAgentPoePortNumber OBJECT-TYPE - SYNTAX InterfaceIndex - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The port number in ifIndex value." - ::= { snAgentPoePortEntry 1 } - -snAgentPoePortControl OBJECT-TYPE - SYNTAX INTEGER { - other(1), - disable(2), - enable(3), - enableLegacyDevice(4) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Control inline power on/off to a port. If a port does not - have inline power capability, reading this object returns - 'other(1)'." - ::= { snAgentPoePortEntry 2 } - -snAgentPoePortWattage OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Adjust the inline power wattage. Valid value between 1000 - to 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is milliwatts. This object can only be - set after snSwIfInLinePowerControl has been set to 'enable(3)' - or 'enableLegacyDevice(4)'. If a port does not have inline - power capability, reading this object returns undefined value." - ::= { snAgentPoePortEntry 3 } - -snAgentPoePortClass OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). - This object can only be set after snSwIfInLinePowerControl - has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If - a port does not have inline power capability, reading this - object returns undefined value." - ::= { snAgentPoePortEntry 4 } - -snAgentPoePortPriority OBJECT-TYPE - SYNTAX INTEGER { - invalid(0), - critical(1), - high(2), - low(3), - medium(4), - other(5) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Inline power allocation priority for the power device - 0- Not a POE port, 1- Critical, 2- High, 3- Low, - 4- Medium, 5- other." - ::= { snAgentPoePortEntry 5 } - -snAgentPoePortConsumed OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Inline power consumed by the port. Each unit is milliwatts." - ::= { snAgentPoePortEntry 6 } - -snAgentPoePortType OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Inline Power device type 802.3af, 802.3at or Legacy device." - ::= { snAgentPoePortEntry 7 } - - --- Power Over Module Table - -snAgentPoeModuleTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentPoeModuleEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of POE Module configuration." - ::= { snAgentPoeModule 1 } - -snAgentPoeModuleEntry OBJECT-TYPE - SYNTAX SnAgentPoeModuleEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row in the POE Module table." - INDEX { snAgentPoeModuleNumber } - ::= { snAgentPoeModuleTable 1 } - -SnAgentPoeModuleEntry ::= SEQUENCE { - snAgentPoeModuleNumber - Unsigned32, - snAgentPoeModuleBudget - Unsigned32, - snAgentPoeModuleMaxPDTypeSupport - INTEGER - } - -snAgentPoeModuleNumber OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This objects talks about POE module number." - ::= { snAgentPoeModuleEntry 1 } - -snAgentPoeModuleBudget OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This objects talks about module power budget in watts." - ::= { snAgentPoeModuleEntry 2 } - -snAgentPoeModuleMaxPDTypeSupport OBJECT-TYPE - SYNTAX INTEGER { - ieee802dot3af(0), - ieee802dot3at(1) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object talks about the POE module type which is capable to support Power Device (PD) type - ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also - support ieee802.3af but reverse is not true." - - ::= { snAgentPoeModuleEntry 3 } - - - --- Power Over Unit Table (stacking system) - -snAgentPoeUnitTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentPoeUnitEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of POE informaion for each unit. Only the unit - that has POE capability appears in a table row" - ::= { snAgentPoeUnit 1 } - -snAgentPoeUnitEntry OBJECT-TYPE - SYNTAX SnAgentPoeUnitEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row in the POE Unit table." - INDEX { snAgentPoeUnitIndex } - ::= { snAgentPoeUnitTable 1 } - -SnAgentPoeUnitEntry ::= SEQUENCE { - snAgentPoeUnitIndex - Unsigned32, - snAgentPoeUnitPowerCapacityTotal - Unsigned32, - snAgentPoeUnitPowerCapacityFree - Unsigned32, - snAgentPoeUnitPowerAllocationsRequestsHonored - Unsigned32 - } - -snAgentPoeUnitIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Index to POE unit Table." - ::= { snAgentPoeUnitEntry 1 } - -snAgentPoeUnitPowerCapacityTotal OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows the total inline power capacity available on that unit (device), measured in mWatts. " - ::= { snAgentPoeUnitEntry 2 } - -snAgentPoeUnitPowerCapacityFree OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts." - ::= { snAgentPoeUnitEntry 3 } - -snAgentPoeUnitPowerAllocationsRequestsHonored OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object shows number of times the inline power allocations requests honored on that unit (device)." - ::= { snAgentPoeUnitEntry 4} - -END - diff --git a/foundry/FOUNDRY-SN-AGENT-MIB.mib b/foundry/FOUNDRY-SN-AGENT-MIB.mib index e8b9ff967..4f405b889 100644 --- a/foundry/FOUNDRY-SN-AGENT-MIB.mib +++ b/foundry/FOUNDRY-SN-AGENT-MIB.mib @@ -3,80 +3,59 @@ FOUNDRY-SN-AGENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,TimeTicks, IpAddress, Counter32, Gauge32,Unsigned32,Integer32 FROM SNMPv2-SMI - TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp + TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- [RFC 4001] - EnabledStatus - FROM P-BRIDGE-MIB CounterBasedGauge64 FROM HCNUM-TC + EnabledStatus + FROM P-BRIDGE-MIB snChassis, snAgentSys, snStack - FROM FOUNDRY-SN-ROOT-MIB; - -snAgent MODULE-IDENTITY - LAST-UPDATED "201209210000Z" -- 21 September 2012 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201403100000Z" -- 10 March 2014 - DESCRIPTION - "Deprecated brcdSwIntfModAutoUpgradeAllImages OID." - REVISION "201302280000Z" -- 28 February 2013 - DESCRIPTION - "Added snAgentBrdUpTime object." - - REVISION "201209210000Z" -- 21 September 2012 - DESCRIPTION - "Added snAgGblPasswordCheckMode object." - - REVISION "201204180000Z" -- 18 April 2012 - DESCRIPTION - "Added downloadSPMonitor enum to snAgImgLoad object." - - REVISION "201201240000Z" -- 24 January 2012 - DESCRIPTION - "Added snAgentCpuProcessEnable object." - - REVISION "201112220000Z" -- 22 December 2011 - DESCRIPTION - "Major Changes in NI 5.3: Added MIBs for Simplified Upgrade, - Fixes for status for 100G module in blocked slot, - SNMP support for MR2 module - Description Updates." + FROM FOUNDRY-SN-ROOT-MIB + Ipv6Address + FROM IPV6-TC; - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION +snAgent MODULE-IDENTITY + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) 4} -- textual conventions MacAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" STATUS current DESCRIPTION " @@ -86,7 +65,7 @@ snAgent MODULE-IDENTITY a string of 6 octets. " SYNTAX OCTET STRING (SIZE(6)) - + DisplayString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION @@ -96,42 +75,6 @@ snAgent MODULE-IDENTITY SIZE (0..255)" SYNTAX OCTET STRING - - BrcdImageType ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Image types supported by XMR/MLX and CES/CER" - SYNTAX INTEGER { - unknown(1), - managementModuleBoot(2), - managementModuleMonitor(3), - managementModuleApplication(4), - interfaceModuleBoot(5), - interfaceModuleMonitor(6), - interfaceModuleApplication(7), - mgmtAndIntfModuleCombinedApp(8), - fpgaMBridge(9), - fpgaMBridge32(10), - fpgaSBridge(11), - fpgaHBridge(12), - fpgaBundled(13), - fpgaPbifOc(14), - fpgaStatsOc(15), - fpgaXppOc(16), - fpgaPbifMrj(17), - fpgaStatsMrj(18), - fpgaXppMrj(19), - fpgaPbifSp2(20), - fpgaXgmacSp2(21), - fpgaXppSp2(22), - fpgaPbif8x10(23), - fpgaXpp8x10(24), - fpgaXpp2x100(25), - fpgaPbifMetro(26), - fpgaXpp4x40(27), - fpgaPbif4x40(28) - } - -- Groups snChasGen OBJECT IDENTIFIER ::= { snChassis 1 } @@ -151,7 +94,7 @@ snChasType OBJECT-TYPE STATUS current DESCRIPTION "The chassis type represents the type - of Foundry product being managed. " + of Ruckus Wireless product being managed. " ::= { snChasGen 1 } @@ -177,7 +120,7 @@ snChasPwrSupplyStatus OBJECT-TYPE STATUS deprecated DESCRIPTION "This object is being deprecated, please use snChasPwrSupplyTable instead. - + A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits @@ -219,7 +162,7 @@ snChasFanStatus OBJECT-TYPE STATUS deprecated DESCRIPTION "This object is being deprecated, please use snChasFanTable instead. - + A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. @@ -306,7 +249,7 @@ snChasStatusLeds OBJECT-TYPE 1 on (Link on) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -336,7 +279,7 @@ snChasTrafficLeds OBJECT-TYPE 1 on (traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -736,10 +679,6 @@ snChasProductType OBJECT-TYPE biRx32(15), niCES2000Series(16), niCER2000Series(17), - brMlxE4(18), - brMlxE8(19), - brMlxE16(20), - brMlxE32(21), biNI2(50), biBB(66), biM4(77), @@ -753,38 +692,20 @@ snChasProductType OBJECT-TYPE "Product type." ::= { snChasGen 26 } -snChasSystemMode OBJECT-TYPE - SYNTAX INTEGER { - xmr(1), - mlx(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "System Mode. This object is only applicable to XMR/MLX/MLXe products. - For example, if snChasProductType is niMlx4/niMlx8/niMlx16/niMlx32 then the - this object returns mlx(2). If snChasProductType is niXmr4000/niXmr8000 - niXmr160000/niXmr32000 this object returns xmr(1). If snChasProductType - is brMlxE4/brMlxE8/brMlxE16/brMlxE32 this object - returns either xmr(1) or mlx(2) depending on the mode of the system. - This object is not supported for the other products." - ::= { snChasGen 27 } +snChasGlobalIgnoreShutdownTemperature OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable the temperature threshold shutdown (Battleshort mode) feature at global level. + Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) at global level + The set operation is allowed at global level. + Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature at global level. + Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature at global level. + The default status is disabled." -snChasFactoryPartNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Factory Part number assigned by the manufacturer." - ::= { snChasGen 28 } - -snChasFactorySerialNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Factory serial number assigned by the manufacturer." - ::= { snChasGen 29 } + DEFVAL { disabled } + ::= { snChasGen 30 } -- Power Supply Table @@ -1011,7 +932,7 @@ snChasFan2Unit OBJECT-TYPE DESCRIPTION "The index to fan table." ::= { snChasFan2Entry 1 } - + snChasFan2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only @@ -1075,7 +996,11 @@ SnChasUnitEntry ::= SEQUENCE { snChasUnitShutdownTemperature INTEGER, snChasUnitPartNum - DisplayString + DisplayString, + snChasUnitIgnoreShutdownTemperature + INTEGER, + snChasUnitFanless + INTEGER } snChasUnitIndex OBJECT-TYPE @@ -1104,7 +1029,7 @@ snChasUnitNumSlots OBJECT-TYPE "Number of slots of the chassis for each unit." ::= { snChasUnitEntry 3 } - + snChasUnitActualTemperature OBJECT-TYPE SYNTAX INTEGER (-110..250) MAX-ACCESS read-only @@ -1119,7 +1044,7 @@ snChasUnitActualTemperature OBJECT-TYPE snChasUnitWarningTemperature OBJECT-TYPE SYNTAX INTEGER (0..250) - MAX-ACCESS read-only + MAX-ACCESS read-write STATUS current DESCRIPTION "Actual temperature higher than this threshold value will trigger @@ -1152,6 +1077,37 @@ snChasUnitPartNum OBJECT-TYPE the value should be a zero length string." ::= { snChasUnitEntry 7 } +snChasUnitIgnoreShutdownTemperature OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. + Able to fetch the temperature threshold shutdown (Battleshort mode) feature status enabled (1)/disabled (0) on the unit specific + The set operation is allowed at unit specific. + Set to 1 to enable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. + Set to 0 to disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. + The default status is disabled." + DEFVAL { disabled } + ::= { snChasUnitEntry 8 } + +snChasUnitFanless OBJECT-TYPE + SYNTAX INTEGER { + none(0), + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Fanless mode can be enabled or disabled on certain FI devices. + none (0): not applicable to the device. + enabled(1): fanless mode is enabled on the device + disabled(2): fanless mode is disabled on the device. + The default value is disabled (2) . + Note: that Fanless mode can be applicable to ICX7150-24P and ICX7150-48P only" + DEFVAL { disabled } + ::= { snChasUnitEntry 9 } -- Agent Groups @@ -1168,19 +1124,16 @@ snAgentRedundant OBJECT IDENTIFIER ::= { snAgentSys 10 } snAgentCpu OBJECT IDENTIFIER ::= { snAgentSys 11 } snAgentHw OBJECT IDENTIFIER ::= { snAgentSys 12 } snAgentTemp OBJECT IDENTIFIER ::= { snAgentSys 13 } -snAgentPoe OBJECT IDENTIFIER ::= { snAgentSys 14 } +--snAgentPoe OBJECT IDENTIFIER ::= { snAgentSys 14 } this change due to the duplicate OID issue (FI-247705) snAgentLicense OBJECT IDENTIFIER ::= { snAgentSys 15 } -brcdSw OBJECT IDENTIFIER ::= { snAgentSys 16 } -snAgentTask OBJECT IDENTIFIER ::= { snAgentSys 17 } + + -brcdSwPackageGroup OBJECT IDENTIFIER ::= { brcdSw 1 } -brcdSwPackageUpgrade OBJECT IDENTIFIER ::= { brcdSwPackageGroup 1 } -brcdSwIntfModAutoUpgrade OBJECT IDENTIFIER ::= { brcdSwPackageGroup 2 } -- SECTION 2: MIB Objects -- Agent's Global Group - + snAgReload OBJECT-TYPE SYNTAX INTEGER { other(1), @@ -1213,9 +1166,10 @@ snAgEraseNVRAM OBJECT-TYPE busy(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "Action object to erase NVRAM of the agent. + "This object is not supported from FI9010, please use snAgEraseConfig + Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash @@ -1239,9 +1193,10 @@ snAgWriteNVRAM OBJECT-TYPE busy(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "Action object to save all configuration info to + "This object is not supported from FI9010, please use snAgSaveConfig + Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) @@ -1265,11 +1220,10 @@ snAgConfigFromNVRAM OBJECT-TYPE configing(4), busy(5) } - MAX-ACCESS read-write - STATUS current + MAX-ACCESS not-accessible + STATUS deprecated DESCRIPTION - "This object is no more supported by FastIron and NetIron agents and - should not be used. + "This object is not supported from FI9010, Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) @@ -1277,7 +1231,7 @@ snAgConfigFromNVRAM OBJECT-TYPE configing(4)...configing from NVRAM flash is in process. busy(5).......operation not allowed at this time, flash is busy The following value can be written: - config(3).....do config + config(3).....do config The agent will return a response after config is done." ::= { snAgentGbl 4 } @@ -1342,7 +1296,8 @@ snAgImgLoad OBJECT-TYPE uploadMPMonitor(30), downloadMPMonitor(31), downloadSPBootROM(32), - downloadSPMonitor(33) + downloadUfiPrimary(34), + downloadUfiSecondary(35) } MAX-ACCESS read-write STATUS current @@ -1366,8 +1321,9 @@ snAgImgLoad OBJECT-TYPE uploadMPMonitor(30)..upload the Monitor image from MP flash to tftp server. downloadMPMonitor(31)..download the Monitor image from tftp server to MP flash. downloadSPBootROM(32)..download the Boot image from tftp server to SP flash. - downloadSPMonitor(33)..download the Monitor image from tftp server to SP flash. - + downloadUfiPrimary(34)..download the Primary UFI image from tftp server to flash. + downloadUfiSecondary(35)..download the Secondary UFI image from tftp server to flash. + MP is the management processor, SP is the switch processor. The image filename is defined in @@ -1517,7 +1473,7 @@ snAgGblIfIpMask OBJECT-TYPE snAgGblPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..97)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "System Security Access Password and this is only allowed to use for setting but not for reading. @@ -1747,9 +1703,7 @@ snAgGblCpuUtilData OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The statistics collection of utilization of the CPU in the device. - In NetIron and FastIron platforms, reading this object resets all the counters. - Therefore, a user need not set snAgGblUtilCollect." + "The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect." ::= { snAgentGbl 35 } snAgGblCpuUtilCollect OBJECT-TYPE @@ -1763,13 +1717,13 @@ snAgGblCpuUtilCollect OBJECT-TYPE ::= { snAgentGbl 36 } snAgGblTelnetTimeout OBJECT-TYPE - SYNTAX Integer32 + SYNTAX INTEGER (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION - "Telnet session idling timeout value. Each value unit is one minute. - FastIron and NetIron platforms support value upto 240 minutes. - On these platforms, value 0 means telnet sessions do not timeout." + "Telnet session idling timeout value. Writing value 0 to + this object never timeouts any telnet sessions. Each value + unit is one minute." ::= { snAgentGbl 37 } snAgGblEnableWebMgmt OBJECT-TYPE @@ -1941,7 +1895,8 @@ snAgBuildVer OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The image label of the built software" + "The version of the built software in the form + 'major.minor.maintenance[letters]'." ::= { snAgentGbl 49 } snAgGblCpuUtil1SecAvg OBJECT-TYPE @@ -1974,18 +1929,16 @@ snAgGblDynMemUtil OBJECT-TYPE STATUS deprecated DESCRIPTION "The system dynamic memory utilization, in unit of percentage. - Deprecated: Refer to snAgSystemDRAMUtil. - For NI platforms, refer to snAgentBrdMemoryUtil100thPercent" + Deprecated: Refer to snAgSystemDRAMUtil" ::= { snAgentGbl 53 } snAgGblDynMemTotal OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total amount of system dynamic memory, in number of bytes. - Deprecated: Refer to snAgSystemDRAMTotal. - For NI platforms, refer to snAgentBrdMemoryTotal" + Deprecated: Refer to snAgSystemDRAMTotal" ::= { snAgentGbl 54 } snAgGblDynMemFree OBJECT-TYPE @@ -1994,8 +1947,7 @@ snAgGblDynMemFree OBJECT-TYPE STATUS deprecated DESCRIPTION "The free amount of system dynamic memory, in number of bytes. - Deprecated: Refer to snAgSystemDRAMFree. - For NI platforms, refer to snAgentBrdMemoryAvailable" + Deprecated: Refer to snAgSystemDRAMFree" ::= { snAgentGbl 55 } snAgImgLoadSPModuleType OBJECT-TYPE @@ -2048,13 +2000,11 @@ snAgSFlowSourceInterface OBJECT-TYPE ::= { snAgentGbl 59 } snAgGblTelnetLoginTimeout OBJECT-TYPE - SYNTAX Integer32 + SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION - "Telnet session login timeout value in minutes. - FastIron and NetIron platforms support value upto 10 minutes with a default of 2 minutes - and 1 minutes for FastIron and NetIron respectively." + "Telnet session login timeout value in minutes. Default is 2 minutes." ::= { snAgentGbl 60 } snAgGblBannerExec OBJECT-TYPE @@ -2108,34 +2058,119 @@ snAgTftpServerAddr OBJECT-TYPE "TFTP server IP address." ::= { snAgentGbl 66 } -snAgGblDeleteFirstBeforeDownload OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write +snAgGblPasswordCheckMode OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only STATUS current DESCRIPTION - "When set to true deletes the existing target file on the - Management module flash. This object can be set to true only - when the snAgImgLoad is set to downloadMPPrimary(20), - downloadMPSecondary(22), downloadSPPrimary(24), - downloadSPSecondary(25) or downloadMPMonitor(31) in the same - SNMP set request PDU. + "enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. + disabled(2) - The password checking for SNMP set requests is disabled. + When enabled all image/file related MIB object set requests PDU must include the password using the snAgGblPassword." + DEFVAL { enabled } + ::= { snAgentGbl 68 } - This object is reset to false after successful or unsuccessful - download of specified file to flash. +snAgGblEnableTelnetAuthentication OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable telnet authentication in device." + DEFVAL { disabled } + ::= { snAgentGbl 69 } - Reading this object returns false(2)." - ::= { snAgentGbl 67 } +snAgGblManager2FactorAuthentication OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed + and all incoming SSH sessions to device are closed when two-factor authentication is enabled. + disabled(0) - The manager two-factor authentication is disabled. SSH access to device from sources + other than SZ is allowed after manager two-factor authentication is disabled" + DEFVAL { disabled } + ::= { snAgentGbl 70 } + +-- default gateway ipv6 address + +snAgDefGwayIpv6 OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The default ipv6 gateway (router) address." + ::= { snAgentGbl 71 } + +snAgEraseConfig OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + error(2), + erase(3), + erasing(4), + busy(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action object to erase start-up config from flash on the device. + The following values can only be read: + normal(1) + error(2)... operation failed or bad flash + erasing(4)...agent is erasing from flash + busy(5).......operation not allowed at this time, flash is busy + + The following value can be written: + erase(3).....do erase + + The agent will return a response even before the erase is done. + And the read value will be erasing until erase is done. + And the erase request will be rejected until error or normal." + ::= { snAgentGbl 72 } + -snAgGblPasswordCheckMode OBJECT-TYPE - SYNTAX EnabledStatus - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "enabled(1) -The password checking for SNMP set requests is enabled. The default value is enable. - disabled(2) - The password checking for SNMP set requests is disabled. - When enabled all image/file related MIB object set requests PDU must include the password using the snAgGblPassword." - DEFVAL { enabled } - ::= { snAgentGbl 68 } +snAgSaveConfig OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + error(2), + write(3), + writing(4), + busy(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action object to save all configuration info to flash on the device. + The following values can only be read: + normal(1) + error(2)... operation failed or bad flash + writing(4)...agent is writing into flash + busy(5).......operation not allowed at this time, flash is busy + + The following value can be written: + write(3).....do write + + The agent will return a response even before the write is done. + And the read value will be writing until write is done. + And the write request will be rejected until error or normal." + ::= { snAgentGbl 73 } + +snAgGblFirmWareDownLoadState OBJECT-TYPE + SYNTAX INTEGER { + start(0), + validateParameters(1), + downloading(2), + validatingImage(3), + syncingToRemote(4), + writingToFlash(5), + complete(6), + failed(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The firmware download status represents the current state + of a firmware download operation." + DEFVAL { start } + ::= { snAgentGbl 74 } -- Agent Board Table @@ -2212,11 +2247,7 @@ SnAgentBrdEntry ::= SEQUENCE { snAgentBrdSerialNumber DisplayString, snAgentBrdPartNumber - DisplayString, - snAgentBrdMemoryUtil100thPercent - Unsigned32, - snAgentBrdUpTime - TimeTicks + DisplayString } snAgentBrdIndex OBJECT-TYPE @@ -2435,7 +2466,7 @@ snAgentBrdStatusLeds OBJECT-TYPE 1 on (Link on) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2465,7 +2496,7 @@ snAgentBrdTrafficLeds OBJECT-TYPE 1 on (traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2541,8 +2572,7 @@ snAgentBrdModuleStatus OBJECT-TYPE moduleBad(4), moduleConfigured(8), moduleComingUp(9), - moduleRunning(10), - moduleBlocked(11) + moduleRunning(10) } MAX-ACCESS read-only STATUS current @@ -2554,8 +2584,7 @@ snAgentBrdModuleStatus OBJECT-TYPE moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. - moduleRunning(10) ....... The module is running. - moduleBlocked(11) ....... The module is blocked, for full height card." + moduleRunning(10) ....... The module is running." ::= { snAgentBrdEntry 12 } snAgentBrdRedundantStatus OBJECT-TYPE @@ -2623,7 +2652,7 @@ snAgentBrdTxTrafficLeds OBJECT-TYPE 1 on (transmit traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2652,7 +2681,7 @@ snAgentBrdRxTrafficLeds OBJECT-TYPE 1 on (receive traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2678,7 +2707,7 @@ snAgentBrdStatusLedString OBJECT-TYPE 1 on (Link on) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2704,7 +2733,7 @@ snAgentBrdTrafficLedString OBJECT-TYPE 1 on (traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2805,7 +2834,7 @@ snAgentBrdTxTrafficLedString OBJECT-TYPE 1 on (transmit traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2831,7 +2860,7 @@ snAgentBrdRxTrafficLedString OBJECT-TYPE 1 on (receive traffic) The bitmap of LEDs are as following: - + (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 @@ -2876,26 +2905,6 @@ snAgentBrdPartNumber OBJECT-TYPE EEPROM or the module does not support part number within EEPROM." ::= { snAgentBrdEntry 27 } -snAgentBrdMemoryUtil100thPercent OBJECT-TYPE - SYNTAX Unsigned32 (0..10000) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Dynamic memory utilization within this module in units - of one-hundredth of a percent." - ::= { snAgentBrdEntry 28 } - -snAgentBrdUpTime OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Uptime for this module in units of one-hundredth of a second. - This value is only valid if the value of snAgentBrdModuleStatus is - moduleRunning." - ::= { snAgentBrdEntry 29 } - - -- Agent Stacking Board Table @@ -3104,8 +3113,7 @@ snAgentBrd2ModuleStatus OBJECT-TYPE moduleBad(4), moduleConfigured(8), moduleComingUp(9), - moduleRunning(10), - moduleBlocked(11) + moduleRunning(10) } MAX-ACCESS read-only STATUS current @@ -3117,8 +3125,7 @@ snAgentBrd2ModuleStatus OBJECT-TYPE moduleBad(4) ........... The module Hardware is bad. moduleConfigured(8) ...... The module is configured (stacking) moduleComingUp(9) ...... The module is in power-up cycle. - moduleRunning(10) ....... The module is running. - moduleBlocked(11) ....... The module is blocked, for full height card." + moduleRunning(10) ....... The module is running." ::= { snAgentBrd2Entry 6 } snAgentBrd2RedundantStatus OBJECT-TYPE @@ -3421,7 +3428,7 @@ snAgSpBootSeqSpNumber OBJECT-TYPE modules. Index 0 is valid only for setting to simplify the set operation for all the modules." ::= { snAgSpBootSeqEntry 1 } - + snAgSpBootSeqIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible @@ -3485,7 +3492,7 @@ snAgSpBootSeqRowStatus OBJECT-TYPE snAgCfgEosTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgCfgEosEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET @@ -3503,7 +3510,7 @@ snAgCfgEosTable OBJECT-TYPE snAgCfgEosEntry OBJECT-TYPE SYNTAX SnAgCfgEosEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An EOS row in the table of encoded octet strings for table snAgCfgEosTable. " @@ -3526,7 +3533,7 @@ SnAgCfgEosEntry ::= snAgCfgEosIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "Each VLAN EOS Buffer Identifier have a multiple VLAN table entries." @@ -3535,7 +3542,7 @@ snAgCfgEosIndex OBJECT-TYPE snAgCfgEosPacket OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1000)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "An encoded octet string. On reads it contains an integral number of configuration file data packets. The size @@ -3547,7 +3554,7 @@ snAgCfgEosPacket OBJECT-TYPE snAgCfgEosChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A checksum of each configuration file data packet." ::= { snAgCfgEosEntry 3 } @@ -4423,25 +4430,25 @@ snAgentConfigModuleType OBJECT-TYPE fesx24GigFiber1TenGigModule(114), -- Modules for FGS/FLS family - fgs24PortManagementModule(144), - fgs48PortManagementModule(145), - fgsXfp2Port10gModule(152), - fgsCx42Port10gModule(153), - fgsXfp1Cx41Port10gModule(154), - fgsXpf1Port10gModule(155), - fls24PortCopperBaseModule(160), - fls48PortCopperBaseModule(161), - flsXfp1Port10gModule(168), - flsCx41Port10gModule(169), + fgs24PortManagementModule(144), + fgs48PortManagementModule(145), + fgsXfp2Port10gModule(152), + fgsCx42Port10gModule(153), + fgsXfp1Cx41Port10gModule(154), + fgsXpf1Port10gModule(155), + fls24PortCopperBaseModule(160), + fls48PortCopperBaseModule(161), + flsXfp1Port10gModule(168), + flsCx41Port10gModule(169), --Modules for FCX family - fcx624SBaseModule(176), - fcx648SBaseModule(177), - fcx624SPoeBaseModule(180), - fcx648SPoeBaseModule(181), - fcxXfp2Port10gModule(184), - fcxCx42Port16gModule(185), - fcx624SFBaseModule(192), + fcx624SBaseModule(176), + fcx648SBaseModule(177), + fcx624SPoeBaseModule(180), + fcx648SPoeBaseModule(181), + fcxXfp2Port10gModule(184), + fcxCx42Port16gModule(185), + fcx624SFBaseModule(192), biFiJc48ePort100fxIpcModule(195), biFiJc48tPort100fxIpcModule(196), @@ -4458,7 +4465,7 @@ snAgentConfigModuleType OBJECT-TYPE biJc2PortGigIgcM4ManagementModule(214), --Modules for MG-8, RX, XMR, MLX - + fdryBi4Port10GigModule(1048), -- fdryBi40PortGigModule(1049), -- fdryBi1Port100FXManagementModule(1050), @@ -4495,11 +4502,8 @@ snAgentConfigModuleType OBJECT-TYPE fdryMlx4Port10GigSPModule(1088), -- fdryMlx2Port10GigSPModule(1089), -- fdryMlx20PortGigCopperSPModule(1090), -- - fdryMlx20PortGigFXSPModule(1091), -- + fdryMlx20PortGigFXSPModule(1091), -- niMlx8Port10GigSPModule (1092), - brMlx4Port10GigXModule(1093), - brMlx24PortGigCopperXModule(1094), - brMlx24PortGigSfpXModule(1095), niCes24PortFiberModule(1096), niCes24PortCopperModule(1097), niCes2Port10GigModule(1098), @@ -4514,57 +4518,41 @@ snAgentConfigModuleType OBJECT-TYPE fdryXmr4PortOC48SPModule(1107), -- fdryXmr2PortOC48SPModule(1108), -- fdryNiMlxMrManagementModule(1109),-- - niMlx8Port10GigMModule (1110), - niMlx8Port10GigDModule (1111), - brMlx8Port10GigXModule (1112), - brMlx2Port100GigXModule (1113), - brcdMlxMr2ManagementModule(1114), -- for (BR-MLX-MR2-M board) - brcdXmrMr2ManagementModule(1115), -- for (BR-MLX-MR2-X board) - brcdMlx32Mr2ManagementModule(1116), -- for (BR-MLX32-MR2-M board) - brcdXmr32Mr2ManagementModule(1117), -- for (BR-MLX32-MR2-X board) - brcdNiXmr32MrManagementModule(1118), - brcdNiMlx32MrManagementModule(1119), - brcdMlx24Port10GigDMModule(1120), -- for BR-MLX-10Gx24 - DM type - brMlx4Port40GigMModule (1121), - brcdNiCes4Port10GigModule(1122), - brMlx2Port100GigCFP2Module(1123), -- for BR-MLX-100Gx2-CFP2 2-port 100GbE Module - brMlx20Port10GigModule(1124), -- for BR-MLX-10Gx20 20-port 1/10GbE Module - brMlx4Port10GigXIPSecModule(1125), -- for riddler - - --Modules for FastIron Superx, SXR8, SXR16, V4 and V6 Modules - - fdryFiV4Sx12ComboPortManagementModule(2064), - fdryFiV4Sx2Port10gModule(2065), - fdryFiV4Sx24PortGigCopperModule(2066), - fdryFiV4Sx24PortGigFiberModule(2067), - fdryFiV4Sx2Port10gLanWanModule(2068), - fdryFiV4Sx24Port100m1gFiberModule(2069), - fdryFiV4Sx12ComboPortManagement2Module(2074), - fdryFiV4Sx210gPortManagementModule(2080), - fdryFiSx0PortManagementModule(2081), - fdryFiV4Sx4g4fPortManagementModule(2083), - fdryFiV6Sx12ComboPortManagementModule(2096), - fdryFiV6Sx24PortGigCopperModule(2098), - fdryFiV6Sx2Port10gModule(2100), - fdryFiV6Sx24Port100m1gFiberModule(2101), - fdryFiV6Sx210gPortManagementModule(2102), - fdryFiV6Sx48PortGigCopperPoeModule(2103), - fdryFiV6Sx4g4fPortManagementModule(2104), - fdryFiV6Sx12ComboPortManagement2Module(2105), - fdryFiV6Sx48PortGigCopperModule(2106), - fdryFiV6SxXl0PortManagementModule(2112), - fdryFiV6SxXl210gPortManagementModule(2113), + + --Modules for FastIron Superx, SXR8, SXR16, V4 and V6 Modules (unused after FI8.0.50) + + --fdryFiV4Sx12ComboPortManagementModule(2064), + --fdryFiV4Sx2Port10gModule(2065), + --fdryFiV4Sx24PortGigCopperModule(2066), + --fdryFiV4Sx24PortGigFiberModule(2067), + --fdryFiV4Sx2Port10gLanWanModule(2068), + --fdryFiV4Sx24Port100m1gFiberModule(2069), + --fdryFiV4Sx12ComboPortManagement2Module(2074), + --fdryFiV4Sx210gPortManagementModule(2080), + --fdryFiSx0PortManagementModule(2081), + --fdryFiV4Sx4g4fPortManagementModule(2083), + --fdryFiV6Sx12ComboPortManagementModule(2096), + --fdryFiV6Sx24PortGigCopperModule(2098), + --fdryFiV6Sx2Port10gModule(2100), + --fdryFiV6Sx24Port100m1gFiberModule(2101), + --fdryFiV6Sx210gPortManagementModule(2102), + --fdryFiV6Sx48PortGigCopperPoeModule(2103), + --fdryFiV6Sx4g4fPortManagementModule(2104), + --fdryFiV6Sx12ComboPortManagement2Module(2105), + --fdryFiV6Sx48PortGigCopperModule(2106), + --fdryFiV6SxXl0PortManagementModule(2112), + --fdryFiV6SxXl210gPortManagementModule(2113), -- Modules for FWS family (unused after FI8.0.20) --fdryFws24PortCopperBaseModule(2224), --fdryFws48PortCopperBaseModule(2225), --fdryFws24GPortCopperBaseModule(2226), - --fdryFws48GPortCopperBaseModule(2227), + --fdryFws48GPortCopperBaseModule(2227), - --Modules for FCX family - fdryFcx624BaseModule(2208), - fdryFcx648BaseModule(2209), - fdryFcxSfpPlus4Port10gModule(2220), + --Modules for FCX family (unused after FI8.0.95) + --fdryFcx624BaseModule(2208), + --fdryFcx648BaseModule(2209), + --fdryFcxSfpPlus4Port10gModule(2220), --Modules for ICX6610 family fdryIcx6610624BaseModule(2240), @@ -4581,13 +4569,10 @@ snAgentConfigModuleType OBJECT-TYPE fdryIcx6430624PoeBaseModule(2020), fdryIcx6430648PoeBaseModule(2021), fdryIcx6430sfp4Port4gModule(2024), - fdryIcx6430612CBaseModule(2058), - fdryIcx6430Copper2Port2gModule(2059), - fdryIcx6430sfp2Port2gModule(2060), - fdryIcx6430612CBaseModule(2137), + -- fdryIcx6430612CBaseModule(2137), fdryIcx6430Copper2Port2gModule(2138), fdryIcx6430sfp2Port2gModule(2139), - + --Modules for ICX6450 family fdryIcx6450624BaseModule(2032), fdryIcx6450648BaseModule(2033), @@ -4604,11 +4589,11 @@ snAgentConfigModuleType OBJECT-TYPE fdryIcx6650sfp8Port10gModule(2057), --Modules for ICX7750 family - fdryIcx775048CBaseModule(2136), - fdryIcx775048FBaseModule(2135), - fdryIcx775026QBaseModule(2134), - fdryIcx7750QSFP6port40gModule(2132), - fdryIcx77506Q6port40gModule(2133), + fdryIcx775048CBaseModule(2134), + fdryIcx775048FBaseModule(2133), + fdryIcx775026QBaseModule(2132), + fdryIcx7750QSFP6port40gModule(2136), + fdryIcx77506Q6port40gModule(2137), --Modules for ICX7450 family fdryIcx7450624BaseModule(2224), @@ -4617,6 +4602,7 @@ snAgentConfigModuleType OBJECT-TYPE fdryIcx7450624PoeBaseModule(2228), fdryIcx7450648PoeBaseModule(2229), fdryIcx7450632ZPBaseModule(2230), + fdryIcx7400ServiceModule(2232), fdryIcx7400sfpplus4Port40gModule(2233), fdryIcx7400copper4Port40gModule(2234), fdryIcx7400sfp4Port4gModule(2235), @@ -4629,7 +4615,86 @@ snAgentConfigModuleType OBJECT-TYPE fdryIcx7250624PoeBaseModule(2164), fdryIcx7250648PoeBaseModule(2165), fdryIcx7250sfpplus8Port80gModule(2169), - fdryIcx7250sfpplus4Port4gModule(2168) + fdryIcx7250sfpplus4Port4gModule(2168), + + --Modules for ICX7150 family + fdryIcx7150624BaseModule(2064), + fdryIcx7150648BaseModule(2065), + fdryIcx7150648ZPBaseModule(2066), + fdryIcx7150612CPoeBaseModule(2068), + fdryIcx7150624PoeBaseModule(2069), + fdryIcx7150648PoeBaseModule(2070), + fdryIcx7150648PoeFBaseModule(2071), + fdryIcx7150gc2Port2gModule(2072), + fdryIcx7150sfpplus4Port40gModule(2073), + fdryIcx7150sfpplus2Port20gModule(2074), + fdryIcx7150sfpplus8Port80gModule(2075), + fdryIcx7150C08PBaseModule(2176), + fdryIcx7150C10ZPBaseModule(2177), + fdryIcx7150624FBaseModule(2178), + fdryIcx7150C08PTBaseModule(2179), + fdryIcx7150sfp2Port2gModule(2184), + fdryIcx7150gc2Port20gModule(2185), + + + --Modules for ICX7650 family + fdryIcx7650648FBaseModule(2144), + fdryIcx7650648ZPBaseModule(2148), + fdryIcx7650648PBaseModule(2149), + fdryIcx76001Port100gModule(2152), + fdryIcx76002Port80gModule(2153), + fdryIcx76004Port40gModule(2154), + fdryIcx76504Port160gModule(2155), + fdryIcx76502Port200gModule(2156), + fdryIcx76502Port80gModule(2157), + + --Modules for ICX7850 family + fdryIcx7850632QBaseModule(2192), + fdryIcx7850648FBaseModule(2193), + fdryIcx7850648FSBaseModule(2194), + fdryIcx7850648CBaseModule(2195), + fdryIcx780012Port1200gModule(2200), + fdryIcx78008Port800gModule(2201), + + --Modules for ICX7550 family + fdryIcx7550624BaseModule(2208), + fdryIcx7550648BaseModule(2209), + fdryIcx7550624FBaseModule(2210), + fdryIcx7550648FBaseModule(2211), + fdryIcx7550624PBaseModule(2212), + fdryIcx7550648PBaseModule(2213), + fdryIcx7550624ZPBaseModule(2214), + fdryIcx7550648ZPBaseModule(2215), + fdryIcx75502Port200gModule(2216), + fdryIcx75502Port80gModule(2217), + fdryIcx755076004Port40gModule(2218), + fdryIcx755076002Port80gModule(2219), + fdryIcx755076001Port100gModule(2220), + + --Modules for ICX8200 family + fdryIcx8200624BaseModule(2080), + fdryIcx8200624PBaseModule(2081), + fdryIcx8200648BaseModule(2082), + fdryIcx8200648PBaseModule(2083), + fdryIcx8200648PFBaseModule(2084), + fdryIcx8200648PF2BaseModule(2085), + fdryIcx8200624ZPBaseModule(2086), + fdryIcx8200648ZP2BaseModule(2087), + fdryIcx8200624FXBaseModule(2096), + fdryIcx8200624FBaseModule(2097), + fdryIcx8200648FBaseModule(2098), + fdryIcx8200C08PBaseModule(2099), + fdryIcx8200C08PTBaseModule(2100), + fdryIcx8200C08PDCBaseModule(2101), + fdryIcx8200C08PFBaseModule(2102), + fdryIcx8200C08ZPBaseModule(2103), + fdryIcx82004Port100gModule(2088), + fdryIcx82008Port200gModule(2089), + fdryIcx82002Port2gModule(2090), + fdryIcx82002Port20gModule(2091), + fdryIcx82002Port50gModule(2092), + fdryIcx82002Port20gcfModule(2093) + } MAX-ACCESS read-write STATUS current @@ -4709,7 +4774,9 @@ snAgentConfigModuleMgmtModuleType OBJECT-TYPE fastIronSuperXManagementModule(15), fastIronSXRManagementModule(16), fastIronV6SuperXManagementModule(17), - fastIronV6SXRManagementModule(18) + fastIronV6SXRManagementModule(18), + icxStackManagementModule(19), + icxManagementModule(20) } MAX-ACCESS read-only STATUS current @@ -4778,7 +4845,7 @@ snAgentConfigModule2Unit OBJECT-TYPE DESCRIPTION "The index to the Agent Configured Module Table." ::= { snAgentConfigModule2Entry 1 } - + snAgentConfigModule2Slot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only @@ -4789,116 +4856,35 @@ snAgentConfigModule2Slot OBJECT-TYPE snAgentConfigModule2Type OBJECT-TYPE SYNTAX INTEGER { - bi8PortGigManagementModule(0), - bi4PortGigManagementModule(1), - bi16PortCopperManagementModule(2), - bi4PortGigModule(3), - fi2PortGigManagementModule(4), - fi4PortGigManagementModule(5), - bi8PortGigCopperManagementModule(6), - fi8PortGigManagementModule(7), - bi8PortGigModule(8), - bi12PortGigCopper2PortGigFiberManagement(9), - bi24PortCopperModule(10), - fi24PortCopperModule(11), - bi16Port100FXModule(12), - bi8Port100FXModule(13), - bi8PortGigCopperModule(14), - bi12PortGigCopper2PortGigFiber(15), - bi2PortGigManagementModule(18), - bi24Port100FXModule(19), - bi0PortManagementModule(20), - pos622MbsModule(21), - pos155MbsModule(22), - bi2PortGigModule(23), - bi2PortGigCopperModule(24), - fi2PortGigModule(25), - fi4PortGigModule(26), - fi8PortGigModule(27), - fi8PortGigCopperModule(28), - fi8PortGigCopperManagementModule(29), - pos155Mbs2PModule(30), - fi4PortGigCopperManagementModule(31), - fi2PortGigCopperManagementModule(32), - bi4PortGigCopperManagementModule(33), - bi2PortGigCopperManagementModule(34), - bi8PortGigM4ManagementModule(35), - bi4PortGigM4ManagementModule(36), - bi2PortGigM4ManagementModule(37), - bi0PortGigM4ManagementModule(38), - bi0PortWSMManagementModule(39), - biPos2Port2488MbsModule(40), - bi0PortWSMModule(41), - niPos2Port2488MbsModule(42), - ni4802(43), - bi4PortGigNPAModule(44), - biAtm2Port155MbsModule(45), - biAtm4Port155MbsModule(46), - bi1Port10GigModule(47), - fes4802Module(48), - fes2402Module(49), - fes9604Module(50), - fes12GigCopperAndGigFiberModule(51), - fesx24GigModule(52), - fesx24Gig2TenGigModule(53), - fesx24Gig1TenGigModule(54), - fesx48GigModule(55), - fesx48Gig2TenGigModule(56), - fesx48Gig1TenGigModule(57), - superx12ComboPortManagementModule(64), - superx2PortTenGigModule(65), - superx24PortGigCopperModule(66), - superx24PortGigFiberModule(67), - superx2PortTenGigLanWanModule(68), - superx24Port100tx1PortGigFiberModule(69), - superx12ComboPortManagement2Module(74), - superxR2PortTenGigManagementModule(80), - superxRManagementModule(81), - fesx24GigFiberGigCopperModule(112), - fesx24GigFiber2TenGigModule(113), - fesx24GigFiber1TenGigModule(114), - fgs24PortManagementModule(144), - fgs48PortManagementModule(145), - fgsXfp2Port10gModule(152), - fgsCx42Port10gModule(153), - fgsXfp1Cx41Port10gModule(154), - fgsXpf1Port10gModule(155), - fls24PortCopperBaseModule(160), - fls48PortCopperBaseModule(161), - flsXfp1Port10gModule(168), - flsCx41Port10gModule(169), - fcx624SBaseModule(176), - fcx648SBaseModule(177), - fcx624SPoeBaseModule(180), - fcx648SPoeBaseModule(181), - fcxXfp2Port10gModule(184), - fcxCx42Port16gModule(185), - fcx624SFBaseModule(192), - biFiJc48ePort100fxIpcModule(195), - biFiJc48tPort100fxIpcModule(196), - biFiJc8PortGigM4ManagementModule(197), - biFiJc8PortGigIgcModule(198), - biFiJc16PortGigIgcModule(200), - biJc24PortCopperIpc4GigIgcModule(201), - biJc16PortGigCopperIgcModule(202), - biFiJc24Port100fxIpcModule(206), - bi2Port10GigModule(207), - biJc48tPortRJ21OmpModule(208), - biJc48ePortRJ45OmpModule(209), - biJc24PortIpcRJ45PoeModule(212), - biJc2PortGigIgcM4ManagementModule(214), - + fgs24PortManagementModule(144), + fgs48PortManagementModule(145), + fgsXfp2Port10gModule(152), + fgsCx42Port10gModule(153), + fgsXfp1Cx41Port10gModule(154), + fgsXpf1Port10gModule(155), + fls24PortCopperBaseModule(160), + fls48PortCopperBaseModule(161), + flsXfp1Port10gModule(168), + flsCx41Port10gModule(169), + fcx624SBaseModule(176), + fcx648SBaseModule(177), + fcx624SPoeBaseModule(180), + fcx648SPoeBaseModule(181), + fcxXfp2Port10gModule(184), + fcxCx42Port16gModule(185), + fcx624SFBaseModule(192), + -- Modules for FWS family (unused after FI8.0.20) --fdryFws24PortCopperBaseModule(2224), --fdryFws48PortCopperBaseModule(2225), --fdryFws24GPortCopperBaseModule(2226), --fdryFws48GPortCopperBaseModule(2227), - - --Modules for FCX family - fdryFcx624BaseModule(2208), - fdryFcx648BaseModule(2209), - fdryFcxSfpPlus4Port10gModule(2220), - + + --Modules for FCX family (unused after FI8.0.95) + --fdryFcx624BaseModule(2208), + --fdryFcx648BaseModule(2209), + --fdryFcxSfpPlus4Port10gModule(2220), + --Modules for ICX6610 family fdryIcx6610624BaseModule(2240), fdryIcx6610648BaseModule(2241), @@ -4914,13 +4900,10 @@ snAgentConfigModule2Type OBJECT-TYPE fdryIcx6430624PoeBaseModule(2020), fdryIcx6430648PoeBaseModule(2021), fdryIcx6430sfp4Port4gModule(2024), - fdryIcx6430612CBaseModule(2058), - fdryIcx6430Copper2Port2gModule(2059), - fdryIcx6430sfp2Port2gModule(2060), - fdryIcx6430612CBaseModule(2137), + -- fdryIcx6430612CBaseModule(2137), fdryIcx6430Copper2Port2gModule(2138), fdryIcx6430sfp2Port2gModule(2139), - + --Modules for ICX6450 family fdryIcx6450624BaseModule(2032), fdryIcx6450648BaseModule(2033), @@ -4937,11 +4920,11 @@ snAgentConfigModule2Type OBJECT-TYPE fdryIcx6650sfp8Port10gModule(2057), --Modules for ICX7750 family - fdryIcx775048CBaseModule(2136), - fdryIcx775048FBaseModule(2135), - fdryIcx775026QBaseModule(2134), - fdryIcx7750QSFP6port40gModule(2132), - fdryIcx77506Q6port40gModule(2133), + fdryIcx775048CBaseModule(2134), + fdryIcx775048FBaseModule(2133), + fdryIcx775026QBaseModule(2132), + fdryIcx7750QSFP6port40gModule(2136), + fdryIcx77506Q6port40gModule(2137), --Modules for ICX7450 family fdryIcx7450624BaseModule(2224), @@ -4950,6 +4933,7 @@ snAgentConfigModule2Type OBJECT-TYPE fdryIcx7450624PoeBaseModule(2228), fdryIcx7450648PoeBaseModule(2229), fdryIcx7450632ZPBaseModule(2230), + fdryIcx7400ServiceModule(2232), fdryIcx7400sfpplus4Port40gModule(2233), fdryIcx7400copper4Port40gModule(2234), fdryIcx7400sfp4Port4gModule(2235), @@ -4962,7 +4946,85 @@ snAgentConfigModule2Type OBJECT-TYPE fdryIcx7250624PoeBaseModule(2164), fdryIcx7250648PoeBaseModule(2165), fdryIcx7250sfpplus8Port80gModule(2169), - fdryIcx7250sfpplus4Port4gModule(2168) + fdryIcx7250sfpplus4Port4gModule(2168), + + --Modules for ICX7150 family + fdryIcx7150624BaseModule(2064), + fdryIcx7150648BaseModule(2065), + fdryIcx7150648ZPBaseModule(2066), + fdryIcx7150612CPoeBaseModule(2068), + fdryIcx7150624PoeBaseModule(2069), + fdryIcx7150648PoeBaseModule(2070), + fdryIcx7150648PoeFBaseModule(2071), + fdryIcx7150gc2Port2gModule(2072), + fdryIcx7150sfpplus4Port40gModule(2073), + fdryIcx7150sfpplus2Port20gModule(2074), + fdryIcx7150sfpplus8Port80gModule(2075), + fdryIcx7150C08PBaseModule(2176), + fdryIcx7150C10ZPBaseModule(2177), + fdryIcx7150624FBaseModule(2178), + fdryIcx7150C08PTBaseModule(2179), + fdryIcx7150sfp2Port2gModule(2184), + fdryIcx7150gc2Port20gModule(2185), + + --Modules for ICX7650 family + fdryIcx7650648FBaseModule(2144), + fdryIcx7650648ZPBaseModule(2148), + fdryIcx7650648PBaseModule(2149), + fdryIcx76001Port100gModule(2152), + fdryIcx76002Port80gModule(2153), + fdryIcx76004Port40gModule(2154), + fdryIcx76504Port160gModule(2155), + fdryIcx76502Port200gModule(2156), + fdryIcx76502Port80gModule(2157), + + --Modules for ICX7850 family + fdryIcx7850632QBaseModule(2192), + fdryIcx7850648FBaseModule(2193), + fdryIcx7850648FSBaseModule(2194), + fdryIcx7850648CBaseModule(2195), + fdryIcx780012Port1200gModule(2200), + fdryIcx78008Port800gModule(2201), + + --Modules for ICX7550 family + fdryIcx7550624BaseModule(2208), + fdryIcx7550648BaseModule(2209), + fdryIcx7550624FBaseModule(2210), + fdryIcx7550648FBaseModule(2211), + fdryIcx7550624PBaseModule(2212), + fdryIcx7550648PBaseModule(2213), + fdryIcx7550624ZPBaseModule(2214), + fdryIcx7550648ZPBaseModule(2215), + fdryIcx75502Port200gModule(2216), + fdryIcx75502Port80gModule(2217), + fdryIcx755076004Port40gModule(2218), + fdryIcx755076002Port80gModule(2219), + fdryIcx755076001Port100gModule(2220), + + --Modules for ICX8200 family + fdryIcx8200624BaseModule(2080), + fdryIcx8200624PBaseModule(2081), + fdryIcx8200648BaseModule(2082), + fdryIcx8200648PBaseModule(2083), + fdryIcx8200648PFBaseModule(2084), + fdryIcx8200648PF2BaseModule(2085), + fdryIcx8200624ZPBaseModule(2086), + fdryIcx8200648ZP2BaseModule(2087), + fdryIcx8200624FXBaseModule(2096), + fdryIcx8200624FBaseModule(2097), + fdryIcx8200648FBaseModule(2098), + fdryIcx8200C08PBaseModule(2099), + fdryIcx8200C08PTBaseModule(2100), + fdryIcx8200C08PDCBaseModule(2101), + fdryIcx8200C08PFBaseModule(2102), + fdryIcx8200C08ZPBaseModule(2103), + fdryIcx82004Port100gModule(2088), + fdryIcx82008Port200gModule(2089), + fdryIcx82002Port2gModule(2090), + fdryIcx82002Port20gModule(2091), + fdryIcx82002Port50gModule(2092), + fdryIcx82002Port20gcfModule(2093) + } MAX-ACCESS read-write STATUS current @@ -5037,7 +5099,10 @@ snAgentConfigModule2MgmtModuleType OBJECT-TYPE muchoManagementModule(10), rottWeilerManagementModule(11), fesXStackManagementModule(12), - fgsStackManagementModule(13) } + fgsStackManagementModule(13), + icxStackManagementModule(19), + icxManagementModule(20) + } MAX-ACCESS read-only STATUS current DESCRIPTION @@ -5338,9 +5403,7 @@ snCpuProcessTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "Table to list utilization and runtime for all CPU processes - in the device. For NetIron Devices snAgentCpuProcessEnable - object needs to be enabled." + "Table to list utilization and runtime for all CPU processes in the device." ::= { snAgentCpu 2 } snCpuProcessEntry OBJECT-TYPE @@ -5382,12 +5445,7 @@ snCpuProcess5SecUtil OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The statistics collection of last 5 second process utilization. - It is a 100th percentile value (100*n). It can have a value 0 or a value - between 100 to 10000 in multiples of 100. If the agent is queried - immediately after turning on the CPU usage and 5 seconds have not - elapsed then the data will not be available. Therefore we will be - returning the data for the actual elapsed time for NetIron devices." + "The statistics collection of last 5 second process utilization." ::= { snCpuProcessEntry 2 } snCpuProcess1MinUtil OBJECT-TYPE @@ -5395,12 +5453,7 @@ snCpuProcess1MinUtil OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The statistics collection of last 5 second process utilization. - It is a 100th percentile value (100*n). It can have a value 0 or a value - between 100 to 10000 in multiples of 100. If the agent is queried - immediately after turning on the CPU usage and 1 minute has not - elapsed then the data will not be available. Therefore we will be - returning the data for the actual elapsed time for NetIron devices." + "The statistics collection of last 1 minute process utilization." ::= { snCpuProcessEntry 3 } snCpuProcess5MinUtil OBJECT-TYPE @@ -5408,12 +5461,7 @@ snCpuProcess5MinUtil OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The statistics collection of last 5 second process utilization. - It is a 100th percentile value (100*n). It can have a value 0 or a value - between 100 to 10000 in multiples of 100. If the agent is queried - immediately after turning on the CPU usage and 5 minutess have not - elapsed then the data will not be available. Therefore we will be - returning the data for the actual elapsed time for NetIron devices." + "The statistics collection of last 5 minute process utilization." ::= { snCpuProcessEntry 4 } snCpuProcess15MinUtil OBJECT-TYPE @@ -5421,10 +5469,7 @@ snCpuProcess15MinUtil OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The statistics collection of last 5 second process utilization. - It is a 100th percentile value (100*n). It can have a value 0 or a value - between 100 to 10000 in multiples of 100. This object is not supported - and has been excluded from agent for NetIron devices" + "The statistics collection of last 15 minute process utilization." ::= { snCpuProcessEntry 5 } snCpuProcessRuntime OBJECT-TYPE @@ -5435,14 +5480,6 @@ snCpuProcessRuntime OBJECT-TYPE "Process runtime in milliseconds." ::= { snCpuProcessEntry 6 } -snAgentCpuProcessEnable OBJECT-TYPE - SYNTAX EnabledStatus - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Enables the CPU utilization statistics collection." - ::= {snAgentCpu 3} - -- Hardware ICBM (Integrated Central Buffer Manager) Counter Table. snAgentHwICBMCounterTable OBJECT-TYPE @@ -6218,7 +6255,7 @@ snAgentTemp2SensorId OBJECT-TYPE STATUS current DESCRIPTION "The temperature sensor identifier of Slave module whose temperature is - represented by this row, for FastIron management module: sensor#1 - Intake Side Temperature + represented by this row, for management module: sensor#1 - Intake Side Temperature sensor# 2 - Exhaust Side Temperature." ::= { snAgentTemp2Entry 3 } @@ -6242,10 +6279,100 @@ snAgentTemp2Value OBJECT-TYPE is 0.5 degrees Celsius." ::= { snAgentTemp2Entry 5 } +snAgentTempThreshold2Table OBJECT-TYPE + SYNTAX SEQUENCE OF SnAgentTempThreshold2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table to list temperature threshold levels for 3 speeds of fan settings, + threshold and warning temperature . Depending on the temperature level, + the fans run at diffrent speeds of RPM. There are 3 levels of temperature + settings for 3 fan speeds (low, high, shutdown). This table is + applicable to only those modules with temperature sensors. For each row, + there are 3 temperature threshold values. The high value, if reached + causes the fan to run at next high level speed and when it reduces the + below the low value, the fan runs at next low speed." + ::= { snAgentTemp 4 } + +snAgentTempThreshold2Entry OBJECT-TYPE + SYNTAX SnAgentTempThreshold2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row in the module temperature threshold table." + INDEX { snAgentTempThreshold2UnitNum, snAgentTempThreshold2Rule } + ::= { snAgentTempThreshold2Table 1 } + +SnAgentTempThreshold2Entry ::= SEQUENCE { + snAgentTempThreshold2UnitNum + INTEGER, + snAgentTempThreshold2Rule + INTEGER, + snAgentTempThreshold2LowValue + INTEGER, + snAgentTempThreshold2HighValue + INTEGER, + snAgentTempThreshold2ShutdownValue + INTEGER + } + +snAgentTempThreshold2UnitNum OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unit number in the system for which threshold levels represented by this + row are applicable." + ::= { snAgentTempThreshold2Entry 1 } + +snAgentTempThreshold2Rule OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Rule number in the system for which threshold levels represented by this + row are applicable." + ::= { snAgentTempThreshold2Entry 2 } + +snAgentTempThreshold2LowValue OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The low value for the temperature threshold, below which the fans would + need to operate at the next lower speed. Each unit is degrees Celcius. + This value is not applicable for the 'low' level, as there is no more + lower speeds than that." + ::= { snAgentTempThreshold2Entry 3 } + +snAgentTempThreshold2HighValue OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The high value for the temperature threshold, above which the fans would + need to operate at the next higher speed. If it reaches more than the + high threshold value for 'high' level, the module will be shutdown. + Each unit is degrees Celcius." + ::= { snAgentTempThreshold2Entry 4 } + +snAgentTempThreshold2ShutdownValue OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Actual temperature higher than this threshold value will shutdown + a partial of the switch hardware to cool down the system. Each unit + is degrees Celcius. Only management module built with temperature + sensor hardware is applicable. For those non-applicable management + module, it returns no-such-name." + ::= { snAgentTempThreshold2Entry 5 } + +-- Deprecated table fdryLicenseTable (The XML license is not supported) fdryLicenseTable OBJECT-TYPE SYNTAX SEQUENCE OF FdryLicenseEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "A list of licenses maintained by license sub-system." ::= { snAgentLicense 1 } @@ -6253,10 +6380,10 @@ fdryLicenseTable OBJECT-TYPE fdryLicenseEntry OBJECT-TYPE SYNTAX FdryLicenseEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in a license table." - INDEX {fdryLicensePackageName, fdryLicenseLid, IMPLIED fdryLicenseHash} + INDEX {fdryLicensePackageName, fdryLicenseLid, fdryLicenseHash} ::= { fdryLicenseTable 1 } FdryLicenseEntry ::= SEQUENCE { @@ -6293,39 +6420,37 @@ FdryLicenseEntry ::= SEQUENCE { fdryLicensePackageName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "Name of the package, whose license information, this entry displays." ::= { fdryLicenseEntry 1 } - + fdryLicenseLid OBJECT-TYPE SYNTAX DisplayString (SIZE(1..11)) MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION - "For FastIron: License Id (LID) of the license from the package. For the node locked license, + "License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID - is set as 2.0. This entry displays license information. - For NetIron: License Id (LID) of the chassis or the line module for which, this entry - displays license information." + is set as 2.0. This entry displays license information." ::= { fdryLicenseEntry 2 } - + fdryLicenseHash OBJECT-TYPE SYNTAX DisplayString (SIZE(1..17)) MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID." ::= { fdryLicenseEntry 3 } - + fdryLicenseType OBJECT-TYPE SYNTAX INTEGER { normal(1), trial(2) } MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The type of the license, which can be either normal or trial." ::= { fdryLicenseEntry 4 } @@ -6333,18 +6458,18 @@ fdryLicenseType OBJECT-TYPE fdryLicensePrecedence OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, when there are many trial and normal licenses with same package name and LID." ::= { fdryLicenseEntry 5 } - + fdryLicenseTrialDays OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read @@ -6354,17 +6479,17 @@ fdryLicenseTrialDays OBJECT-TYPE fdryLicenseTrialTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - "The number of trial hours for the license, if it's a trial license. - Otherwise, the value has no meaning for normal licenses and read - as 0 on Get operation." + "The cumulative number of hours used for this trial license. This + counts all the usages of the trial license. For a normal license, + this is 0." ::= { fdryLicenseEntry 7 } - + fdryLicenseTrialTimeLeft OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours @@ -6380,7 +6505,7 @@ fdryLicenseTrialState OBJECT-TYPE duplicated (5) } MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is @@ -6388,16 +6513,15 @@ fdryLicenseTrialState OBJECT-TYPE means it has expired and can't be used any more. Duplicated means the license has same package name with other license and but both serial numbers are different in the same device, this is only for - the non-node locked license. Value duplicated(5) is supported only - on FastIron." + the non-node locked license" ::= { fdryLicenseEntry 9 } fdryLicenseVendorInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - "This is the Brocade specific package data which is an octet string. + "This is the Ruckus Wireless specific package data which is an octet string. This contains encoded information of license specific information such as package bit mask, number of ports, etc." ::= { fdryLicenseEntry 10 } @@ -6405,56 +6529,41 @@ fdryLicenseVendorInfo OBJECT-TYPE fdryLicenseSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID and can be present only in one slot." ::= { fdryLicenseEntry 11 } - + fdryLicenseMode OBJECT-TYPE SYNTAX INTEGER { nodeLocked(1), nonNodeLocked(2) } MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - "The mode of the license, which can be either node locked or non-node locked mode. - This objects is supported only on FastIron." + "The mode of the license, which can be either node locked or non-node locked mode." ::= { fdryLicenseEntry 12 } fdryLicenseSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - "This is the serial number of the license. This is only for the non-node locked license. - This objects is supported only on FastIron." + "This is the serial number of the license. This is only for the non-node locked license" ::= { fdryLicenseEntry 13 } fdryLicenseCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The capacity of the license. For POD license, this is the number of ports. - For premium or advance license, it is 1. This objects is supported only on FastIron." + For premium or advance license, it is 1" ::= { fdryLicenseEntry 14 } -fdryLicensedFeatureInfo OBJECT-TYPE - SYNTAX BITS { - ospf(0), - isis(1), - bgp(2), - mpls(3) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The features or packages enabled/licensed on the system." - ::= { snAgentLicense 2 } - -- the port table contains the port which requirs the port license @@ -6504,492 +6613,159 @@ brcdPortLicenseStatus OBJECT-TYPE ::= { brcdPortLicenseEntry 2 } -brcdSwPackageFname OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..128)) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Name of the release package file or manifest file (including path) - currently associated with the system. - When the object is not used, the value is a zero length string." - ::= { brcdSwPackageUpgrade 1 } +-- SAU license unit table -brcdSwPackageLoad OBJECT-TYPE - SYNTAX INTEGER { - none(1), - tftpToPrimary(2), - tftpToSecondary(3), - tftpToMgmtModulePrimaryIntfModuleSecondary(4), - tftpToMgmtModuleSecondaryIntfModulePrimary(5) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Action object to upgrade the system using a release package. - none(1) is the value after the system comes up and should not be used for set-request. - The following values will download the release package from a TFTP server and upgrade the system : - tftpToPrimary(2) installs both MP and LP application images to primary code. - tftpToSecondary(3) installs both MP and LP application images to secondary code. - tftpToMgmtModulePrimaryIntfModuleSecondary (4) installs MP application image to primary code and the LP - application images to secondary code. - tftpToMgmtModuleSecondaryIntfModulePrimary (5) installs MP application image to secondary code and the LP - application images to primary code." - ::= { brcdSwPackageUpgrade 2 } - -brcdSwPackageLoadStatus OBJECT-TYPE - SYNTAX INTEGER { - normal(1), - started(2), - internalError(3), - manifestFileDownloadError(4), - manifestFileValidationError(5), - downloadingManagementModuleBoot (6), - downloadingManagementModuleMonitor (7), - downloadingManagementModuleApplication (8), - downloadingInterfaceModuleBoot (9), - downloadingInterfaceModuleMonitor (10), - downloadingInterfaceModuleApplication (11), - downloadingInterfaceModuleFpga (12), - downloadingFpgaMBridge (13), - downloadingFpgaSBridge (14), - downloadingFpgaHBridge (15), - upgradingManagementModuleBoot (16), - upgradingManagementModuleMonitor (17), - upgradingManagementModuleApplication (18), - upgradingInterfaceModuleBoot (19), - upgradingInterfaceModuleMonitor (20), - upgradingInterfaceModuleApplication (21), - upgradingInterfaceModuleFpga (22), - upgradingFpgaMBridge (23), - upgradingFpgaSBridge (24), - upgradingFpgaHBridge (25) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object indicates the progress of the upgrade operation. - " - ::= { brcdSwPackageUpgrade 3 } - -brcdSwPackageUpgradeAllImages OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "To specify an all-image upgrade. - If set to true(1), the upgrade sequence will include the - MP FPGA images (MBRIDGE/MBRIDGE32 and SBRIDGE/HSBRIDGE). - - Default is false(2) which will upgrade only the MP and LP Monitor - images, MP and LP Application images, and LP Bundled FPGA for MLX/XMR. - While CES/CER will upgrade the monitor, application, and FPGA images. - This object must be set along with brcdSwPackageLoad. - For a read operation, this will always return false(2)." - DEFVAL { false } - ::= { brcdSwPackageUpgrade 4 } - -brcdSwPackageUpgradeResultTable OBJECT-TYPE - SYNTAX SEQUENCE OF BrcdSwPackageUpgradeResultEntry - MAX-ACCESS not-accessible - STATUS current +snSAULicenseUnitTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnSAULicenseUnitEntry + MAX-ACCESS not-accessible + STATUS current DESCRIPTION - "A table containing the summary of the upgrade operation." - ::= { brcdSwPackageUpgrade 5 } + "A list of SAU licenses maintained by each unit." + ::= { snAgentLicense 4 } -brcdSwPackageUpgradeResultEntry OBJECT-TYPE - SYNTAX BrcdSwPackageUpgradeResultEntry +snSAULicenseUnitEntry OBJECT-TYPE + SYNTAX SnSAULicenseUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in SAU license table." + INDEX {snSAULicenseUnitIndex } + ::= { snSAULicenseUnitTable 1 } + +SnSAULicenseUnitEntry ::= SEQUENCE { + snSAULicenseUnitIndex Integer32, + snSAULicensePackageName DisplayString, + snSAUIsPremLicensePresent INTEGER, + snSAUIsPoDLicensePresent INTEGER, + snSAUPoDLicensedSpeed INTEGER, + snSAUPoDLicensedPorts Integer32, + snSAUIsMACSecLicensePresent INTEGER, + snSAUPremSerialNumber DisplayString, + snSAUPoDSerialNumber DisplayString, + snSAUMACsecSerialNumber DisplayString, + snSAUICX7150SerialNumber DisplayString, + snSAUICX8200SerialNumber DisplayString +} + +snSAULicenseUnitIndex OBJECT-TYPE + SYNTAX Integer32 MAX-ACCESS not-accessible - STATUS current + STATUS current DESCRIPTION - "" - INDEX { brcdSwPackageUpgradeResultIndex } - ::= { brcdSwPackageUpgradeResultTable 1 } + "The stacking unit Id" + ::= { snSAULicenseUnitEntry 1 } -BrcdSwPackageUpgradeResultEntry::= SEQUENCE { - brcdSwPackageUpgradeResultIndex - Unsigned32, - brcdSwPackageUpgradeResultImageType - BrcdImageType, - brcdSwPackageUpgradeResultStatus - INTEGER, - brcdSwPackageUpgradeResultTimeStamp - TimeStamp, - brcdSwPackageUpgradeResultDescription - DisplayString - } - -brcdSwPackageUpgradeResultIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS not-accessible - STATUS current +snSAULicensePackageName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current DESCRIPTION - "The sequential index, or upgrade step." - ::= { brcdSwPackageUpgradeResultEntry 1 } + "Name of the license package." + ::= { snSAULicenseUnitEntry 2 } -brcdSwPackageUpgradeResultImageType OBJECT-TYPE - SYNTAX BrcdImageType + snSAUIsPremLicensePresent OBJECT-TYPE + SYNTAX INTEGER { + none (0), + yes (1), + no (2) + } MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION - "The associated image type for this step of upgrade process." - ::= { brcdSwPackageUpgradeResultEntry 2 } + "The present state of L3 premium license. + none means the license is not applicable to this device" + ::= { snSAULicenseUnitEntry 3 } -brcdSwPackageUpgradeResultStatus OBJECT-TYPE - SYNTAX INTEGER { - ok(1), - downloadFailed(2), - installFailed(3), - skipped(4), - unknown(5) +snSAUIsPoDLicensePresent OBJECT-TYPE + SYNTAX INTEGER { + none (0), + yes (1), + no (2) } MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION - "The upgrade status for this particular image upgrade." - ::= { brcdSwPackageUpgradeResultEntry 3 } + "The present state of PoD license. + none means the license is not applicable to this device" + ::= { snSAULicenseUnitEntry 4 } -brcdSwPackageUpgradeResultTimeStamp OBJECT-TYPE - SYNTAX TimeStamp +snSAUPoDLicensedSpeed OBJECT-TYPE + SYNTAX INTEGER { + none (0), + speed10G (1), + speed25G (2) + } MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION - "The timestamp when this upgrade step was performed." - ::= { brcdSwPackageUpgradeResultEntry 4 } + "The port speed of PoD license. + none means the license is not applicable to this device" + ::= { snSAULicenseUnitEntry 5 } -brcdSwPackageUpgradeResultDescription OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..255)) +snSAUPoDLicensedPorts OBJECT-TYPE + SYNTAX Integer32 MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Summary description for this particular image upgrade. - This is empty when brcdSwPackageLoadResultStatus is 'ok'." - ::= { brcdSwPackageUpgradeResultEntry 5 } - -brcdSwPackageUpgradeSkipVersionCheck OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION - "To skip the version comparison of the FPGA images. - By default it performs the version comparison between the - image version in the manifest file and the one installed in - in the system. Setting to 'true' forces the system to upgrade - the images by skipping the version check. - This object must be set along with brcdSwPackageLoad. - For a read operation, this will always return false(2)." - DEFVAL { false } - ::= { brcdSwPackageUpgrade 6 } + "The number of licensed ports. The capacity of PoD License. + Zero means no PoD license or the license is not applicable to this device" + ::= { snSAULicenseUnitEntry 6 } -brcdSwIntfModAutoUpgradeMode OBJECT-TYPE - SYNTAX INTEGER { - unknown(1), - disabled(2), - tftp(3), - slot1(4), - slot2(5) +snSAUIsMACSecLicensePresent OBJECT-TYPE + SYNTAX INTEGER { + none (0), + yes (1), + no (2) } - MAX-ACCESS read-write - STATUS current + MAX-ACCESS read-only + STATUS current DESCRIPTION - "Specifies the mode of LP Auto-upgrade. - " - ::= { brcdSwIntfModAutoUpgrade 1 } + "The present state of MACSec license. + none means the license is not applicable to this device" + ::= { snSAULicenseUnitEntry 7 } -brcdSwIntfModAutoUpgradeTftpAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-write - STATUS current +snSAUPremSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current DESCRIPTION - "TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2). - " - ::= { brcdSwIntfModAutoUpgrade 2 } + "This is the serial number of CoE L3 premium license." + ::= { snSAULicenseUnitEntry 8 } -brcdSwIntfModAutoUpgradeTftpAddr OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-write - STATUS current +snSAUPoDSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current DESCRIPTION - "TFTP server IP address. " - ::= { brcdSwIntfModAutoUpgrade 3 } + "This is the serial number of CoE PoD license." + ::= { snSAULicenseUnitEntry 9 } -brcdSwIntfModAutoUpgradeSrcPath OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..128)) - MAX-ACCESS read-write - STATUS current +snSAUMACsecSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current DESCRIPTION - "Specifies the path to the topmost directory of the release - package relative to the root directory. - If the source is a TFTP server, the root is the TFTP root. - If the source is slot1 or slot2, the root is top-level directory '/'" - ::= { brcdSwIntfModAutoUpgrade 4 } + "This is the serial number of CoE MACsec license." + ::= { snSAULicenseUnitEntry 10 } -brcdSwIntfModAutoUpgradeAllImages OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS deprecated +snSAUICX7150SerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS deprecated DESCRIPTION - "Used to specify an all-image upgrade. If set to true(1), - the upgrade sequence will include the LP BOOT image. - Default is false(2), which will upgrade only the LP FPGA images. - For a read operation, this will return the configured value. + "This is the serial number of CoE ICX7150 license. + FOR ICX7150 platform, only one SAU license option can be installed. e.g. 4x10gr, + It is combination of l3 premium and PoD license, thus there is only a license serial number at one time" + ::= { snSAULicenseUnitEntry 11 } - Deprecated this OID. SET operation will not take into effect, - and READ operations will always return 'false'." - DEFVAL { false } - ::= { brcdSwIntfModAutoUpgrade 5 } - --- System Task CPU Table. -snAgentTaskCpuTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentTaskCpuEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table to display the Task ID, Task Name, CPU state, wait time, hold time and Activity with respect to each task in the device ." - ::= { snAgentTask 1} -snAgentTaskCpuEntry OBJECT-TYPE - SYNTAX SnAgentTaskCpuEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry containing the Task ID, Task Name, CPU state, wait time, hold time and Activity with respect to each task in the device " - INDEX { snAgentTaskCpuTaskID} - ::= { snAgentTaskCpuTable 1 } -SnAgentTaskCpuEntry ::= SEQUENCE { - snAgentTaskCpuTaskID - Integer32, - snAgentTaskCpuTaskName - DisplayString(SIZE(0..32)), - snAgentTaskCpuState - DisplayString(SIZE(0..8)), - snAgentTaskCpuWaitTime - Gauge32, - snAgentTaskCpuHoldTime - Gauge32, - snAgentTaskCpuTaskActivity - DisplayString(SIZE(0..1)) - } -snAgentTaskCpuTaskID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task Identification number" - ::= { snAgentTaskCpuEntry 1 } -snAgentTaskCpuTaskName OBJECT-TYPE - SYNTAX DisplayString(SIZE(0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task name" - ::= { snAgentTaskCpuEntry 2 } -snAgentTaskCpuState OBJECT-TYPE - SYNTAX DisplayString(SIZE(0..8)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the current state of the task" - ::= { snAgentTaskCpuEntry 3 } -snAgentTaskCpuWaitTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the wait time in milliseconds" - ::= { snAgentTaskCpuEntry 4 } -snAgentTaskCpuHoldTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the hold time in milliseconds" - ::= { snAgentTaskCpuEntry 5 } -snAgentTaskCpuTaskActivity OBJECT-TYPE - SYNTAX DisplayString(SIZE(0..1)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task Activity.A - Was running since last show, I - Idle" - ::= { snAgentTaskCpuEntry 6 } --- System Task Message Queue Table -snAgentTaskMQTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentTaskMQEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table to display the Message Queue Priority, Length, Depth, Msgs and the failed count with respect to each task and corresponding MQ priority in the device " - ::= { snAgentTask 2} -snAgentTaskMQEntry OBJECT-TYPE - SYNTAX SnAgentTaskMQEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry containing the Message Queue Priority, Length, Depth, Msgs and the failed count with respect to each task and corresponding MQ priority in the device " - INDEX { snAgentTaskMQTaskID, - snAgentTaskMQPriority } - ::= { snAgentTaskMQTable 1 } -SnAgentTaskMQEntry ::= SEQUENCE { - snAgentTaskMQTaskID - Integer32, - snAgentTaskMQPriority - Integer32, - snAgentTaskMQTaskName - DisplayString(SIZE(0..32)), - snAgentTaskMQLength - Integer32, - snAgentTaskMQDepth - Gauge32, - snAgentTaskMQMaxDepth - Counter32, - snAgentTaskMQStickyMaxDepth - Counter32, - snAgentTaskMQMsgs - Gauge32, - snAgentTaskMQMaxMsgs - Counter32, - snAgentTaskMQStickyMaxMsgs - Counter32, - snAgentTaskMQFailedCount - Gauge32, - snAgentTaskMQStickyFailedCount - Counter32 - } -snAgentTaskMQTaskID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task Identification number" - ::= { snAgentTaskMQEntry 1 } -snAgentTaskMQPriority OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Priority of the Message Queue" - ::= { snAgentTaskMQEntry 2 } -snAgentTaskMQTaskName OBJECT-TYPE - SYNTAX DisplayString(SIZE(0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task name" - ::= { snAgentTaskMQEntry 3 } -snAgentTaskMQLength OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the size of the Message Queue" - ::= {snAgentTaskMQEntry 4 } -snAgentTaskMQDepth OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the message queue depth" - ::= { snAgentTaskMQEntry 5 } -snAgentTaskMQMaxDepth OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the maximum depth reached ever(clear on read counter)" - ::= { snAgentTaskMQEntry 6 } -snAgentTaskMQStickyMaxDepth OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the maximum depth reached ever (This counter is not clear on read)" - ::= { snAgentTaskMQEntry 7 } -snAgentTaskMQMsgs OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the number of messages" - ::= { snAgentTaskMQEntry 8 } -snAgentTaskMQMaxMsgs OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the maximum number of messages reached ever(clear on read counter)" - ::= { snAgentTaskMQEntry 9 } -snAgentTaskMQStickyMaxMsgs OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent the maximum number of messages reached ever (This counter is not clear on read)" - ::= { snAgentTaskMQEntry 10 } -snAgentTaskMQFailedCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent failed count(clear on read counter)" - ::= { snAgentTaskMQEntry 11 } -snAgentTaskMQStickyFailedCount OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A count used to represent failed count(This counter is not clear on read)" - ::= { snAgentTaskMQEntry 12 } --- System Task Buffer Table -snAgentTaskBufferTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnAgentTaskBufferEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table to display the Task ID, Task name , Pool_ID and the buffer count of each task in the device" - ::= { snAgentTask 3} -snAgentTaskBufferEntry OBJECT-TYPE - SYNTAX SnAgentTaskBufferEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry containing the Task ID, Task name , Pool_ID and the buffer count of each task in the device" - INDEX { snAgentTaskBufferTaskID, - snAgentTaskBufferPoolID } - ::= { snAgentTaskBufferTable 1 } -SnAgentTaskBufferEntry ::= SEQUENCE { - snAgentTaskBufferTaskID - Integer32, - snAgentTaskBufferPoolID - Integer32, - snAgentTaskBufferTaskName - DisplayString(SIZE(0..32)), - snAgentTaskBufferCount - Gauge32 - } -snAgentTaskBufferTaskID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task Identification number" - ::= { snAgentTaskBufferEntry 1 } -snAgentTaskBufferPoolID OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Pool Identification number" - ::= { snAgentTaskBufferEntry 2 } -snAgentTaskBufferTaskName OBJECT-TYPE - SYNTAX DisplayString(SIZE(0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Represents the Task name" - ::= { snAgentTaskBufferEntry 3 } -snAgentTaskBufferCount OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current +snSAUICX8200SerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current DESCRIPTION - "A count used to represent the number of buffers allocated to a task" - ::= {snAgentTaskBufferEntry 4 } + "This is the serial number of CoE ICX8200 license. + FOR ICX8200 platform, only one SAU license option can be installed. e.g. 4x25gr, + It is combination of l3 premium and PoD license, thus there is only a license serial number at one time" + ::= { snSAULicenseUnitEntry 12 } + END diff --git a/foundry/FOUNDRY-SN-ARP-GROUP-MIB.mib b/foundry/FOUNDRY-SN-ARP-GROUP-MIB.mib index 8636c8454..7db468f58 100644 --- a/foundry/FOUNDRY-SN-ARP-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-ARP-GROUP-MIB.mib @@ -8,7 +8,7 @@ IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32 FROM SNMPv2-SMI snSwitch - FROM FOUNDRY-SN-ROOT-MIB; + FROM FOUNDRY-SN-SWITCH-GROUP-MIB; snArpInfo MODULE-IDENTITY LAST-UPDATED "201006020000Z" -- 04 June 2010 diff --git a/foundry/FOUNDRY-SN-BGP4-GROUP-MIB.mib b/foundry/FOUNDRY-SN-BGP4-GROUP-MIB.mib index 10fa6d69f..6f72c9d23 100644 --- a/foundry/FOUNDRY-SN-BGP4-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-BGP4-GROUP-MIB.mib @@ -1,43 +1,44 @@ FOUNDRY-SN-BGP4-GROUP-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Counter32, IpAddress,Integer32,Unsigned32 + MODULE-IDENTITY, OBJECT-TYPE, Counter32, IpAddress,Integer32, Unsigned32 FROM SNMPv2-SMI router FROM FOUNDRY-SN-ROOT-MIB InetAutonomousSystemNumber FROM INET-ADDRESS-MIB; - + snBgp4 MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { router 11} -- Groups @@ -74,7 +75,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } MAX-ACCESS read-write STATUS current DESCRIPTION - "To enable/disable the comparison of the Multi-Exit Discriminator for paths from + "To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS." ::= { snBgp4Gen 1 } @@ -84,15 +85,15 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } STATUS current DESCRIPTION "To enable/disable the default behavior of automatic summarization of subnet routes - into network-level routes." + into network-level routes." ::= { snBgp4Gen 2 } snBgp4GenDefaultLocalPreference OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "To set the default local preference attribute." + "To set the default local preference attribute.This is deprecated and snBgp4GenDefaultLocalPreference1 is introduced." ::= { snBgp4Gen 3 } snBgp4GenDefaultInfoOriginate OBJECT-TYPE @@ -166,7 +167,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } ::= { snBgp4Gen 11 } snBgp4GenTableMap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -187,9 +188,9 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } snBgp4GenDefaultMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "To set default metric values for the BGP4 protocol." + "To set default metric values for the BGP4 protocol.This is deprecated and snBgp4GenDefaultMetric1 is introduced." ::= { snBgp4Gen 14 } snBgp4GenMaxNeighbors OBJECT-TYPE @@ -365,11 +366,11 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } ::= { snBgp4Gen 35 } snBgp4ClusterId OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION - "A cluster ID which is represented by 4 bytes unsigned + "A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default." ::= { snBgp4Gen 36 } @@ -411,7 +412,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } STATUS current DESCRIPTION "An AS number from 1 to 0xFFFF construct confederation peers. - There are 50(max peers) of them. + There are 50(max peers) of them. This integer number is represented by 2 OCTETs." ::= { snBgp4Gen 41 } @@ -420,10 +421,10 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The dampening of BGP4 in the router. + "The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. - 'routeMap' denotes routemap is configurable." + 'routeMap' denotes routemap is configurable." ::= { snBgp4Gen 42 } snBgp4GenDampenHalfLife OBJECT-TYPE @@ -459,7 +460,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } ::= { snBgp4Gen 46 } snBgp4GenDampenMap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -474,7 +475,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } DESCRIPTION "BGP4 local autonomous system (AS) number to support 4 byte AS format." ::= { snBgp4Gen 48 } - + snBgp4GenDefaultMetric1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write @@ -482,7 +483,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } DESCRIPTION "To set default metric values for the BGP4 protocol." ::= { snBgp4Gen 49 } - + snBgp4GenDefaultLocalPreference1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write @@ -490,7 +491,7 @@ snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } DESCRIPTION "To set the default local preference attribute." ::= { snBgp4Gen 50 } - + --- Bgp4 Address Filter table snBgp4AddrFilterTable OBJECT-TYPE @@ -513,7 +514,7 @@ snBgp4AddrFilterEntry OBJECT-TYPE SnBgp4AddrFilterEntry ::= SEQUENCE { snBgp4AddrFilterIndex Integer32, - snBgp4AddrFilterAction + snBgp4AddrFilterAction INTEGER, snBgp4AddrFilterSourceIp IpAddress, @@ -536,7 +537,7 @@ snBgp4AddrFilterIndex OBJECT-TYPE ::= { snBgp4AddrFilterEntry 1 } snBgp4AddrFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -655,33 +656,33 @@ snBgp4AggregateAddrMask OBJECT-TYPE ::= { snBgp4AggregateAddrEntry 2 } snBgp4AggregateAddrOption OBJECT-TYPE - SYNTAX INTEGER { - address(1), - asSet(2), - summaryOnly(3), - suppressMap(4), - advertiseMap(5), - attributeMap(6) - } + SYNTAX INTEGER { + address(1), + asSet(2), + summaryOnly(3), + suppressMap(4), + advertiseMap(5), + attributeMap(6) + } MAX-ACCESS read-only STATUS current DESCRIPTION - "address(1), asSet(2), summaryOnly(3), - the suppressMap(4), advertiseMap(5), - attributeMap(6) are Options for creating an aggregate entry + "address(1), asSet(2), summaryOnly(3), + the suppressMap(4), advertiseMap(5), + attributeMap(6) are Options for creating an aggregate entry in a BGP routing table." ::= { snBgp4AggregateAddrEntry 3 } snBgp4AggregateAddrMap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "This object associates with the snBgp4AggregateAddrOption and - the suppressMap(4), advertiseMap(5), attributeMap(6) of the - snBgp4AggregateAddrOption are only two Options for creating - an aggregate address map. A SNMP-SET error will be returned - for other options. An octet string of the map name, + "This object associates with the snBgp4AggregateAddrOption and + the suppressMap(4), advertiseMap(5), attributeMap(6) of the + snBgp4AggregateAddrOption are only two Options for creating + an aggregate address map. A SNMP-SET error will be returned + for other options. An octet string of the map name, each character of the name is represented by one octet." ::= { snBgp4AggregateAddrEntry 4 } @@ -737,7 +738,7 @@ snBgp4AsPathFilterEntry OBJECT-TYPE SnBgp4AsPathFilterEntry ::= SEQUENCE { snBgp4AsPathFilterIndex Integer32, - snBgp4AsPathFilterAction + snBgp4AsPathFilterAction INTEGER, snBgp4AsPathFilterRegExpression OCTET STRING, @@ -754,7 +755,7 @@ snBgp4AsPathFilterIndex OBJECT-TYPE ::= { snBgp4AsPathFilterEntry 1 } snBgp4AsPathFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -825,7 +826,7 @@ snBgp4CommunityFilterEntry OBJECT-TYPE SnBgp4CommunityFilterEntry ::= SEQUENCE { snBgp4CommunityFilterIndex Integer32, - snBgp4CommunityFilterAction + snBgp4CommunityFilterAction INTEGER, snBgp4CommunityFilterCommNum OCTET STRING, @@ -850,7 +851,7 @@ snBgp4CommunityFilterIndex OBJECT-TYPE ::= { snBgp4CommunityFilterEntry 1 } snBgp4CommunityFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -863,12 +864,12 @@ snBgp4CommunityFilterCommNum OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFFFFFF. There are 20 of them. + "A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs." ::= { snBgp4CommunityFilterEntry 3 } snBgp4CommunityFilterInternet OBJECT-TYPE - SYNTAX INTEGER { disabled(0), enabled(1) } + SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -876,7 +877,7 @@ snBgp4CommunityFilterInternet OBJECT-TYPE ::= { snBgp4CommunityFilterEntry 4 } snBgp4CommunityFilterNoAdvertise OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -884,7 +885,7 @@ snBgp4CommunityFilterNoAdvertise OBJECT-TYPE ::= { snBgp4CommunityFilterEntry 5 } snBgp4CommunityFilterNoExport OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -922,12 +923,12 @@ snBgp4CommunityFilterRowStatus OBJECT-TYPE ::= { snBgp4CommunityFilterEntry 7 } snBgp4CommunityFilterLocalAs OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send this route to peers in other sub-autonomous systems within - the local confederation. Do not advertise this route to an + the local confederation. Do not advertise this route to an external system." ::= { snBgp4CommunityFilterEntry 8 } @@ -955,7 +956,7 @@ SnBgp4NeighGenCfgEntry ::= SEQUENCE { IpAddress, snBgp4NeighGenCfgAdvertlevel INTEGER, - snBgp4NeighGenCfgDefOriginate + snBgp4NeighGenCfgDefOriginate INTEGER, snBgp4NeighGenCfgEbgpMultihop INTEGER, @@ -969,7 +970,7 @@ SnBgp4NeighGenCfgEntry ::= SEQUENCE { INTEGER, snBgp4NeighGenCfgWeight INTEGER, - snBgp4NeighGenCfgWeightFilterList + snBgp4NeighGenCfgWeightFilterList OCTET STRING, snBgp4NeighGenCfgRowStatus INTEGER, @@ -1004,11 +1005,11 @@ snBgp4NeighGenCfgNeighIp OBJECT-TYPE ::= { snBgp4NeighGenCfgEntry 1 } snBgp4NeighGenCfgAdvertlevel OBJECT-TYPE - SYNTAX INTEGER (0..600) + SYNTAX INTEGER (0..600) MAX-ACCESS read-write STATUS current DESCRIPTION - "To set the minimum interval between the + "To set the minimum interval between the sending of BGP routing updates." ::= { snBgp4NeighGenCfgEntry 2 } @@ -1071,11 +1072,11 @@ snBgp4NeighGenCfgWeight OBJECT-TYPE ::= { snBgp4NeighGenCfgEntry 9 } snBgp4NeighGenCfgWeightFilterList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighGenCfgEntry 10 } @@ -1116,9 +1117,9 @@ snBgp4NeighGenCfgUpdateSrcLpbIntf OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "To allow internal BGP sessions to use any operational + "To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero - interface means to restore the interface assignment to the + interface means to restore the interface assignment to the closest interface, which is called the best local address." ::= { snBgp4NeighGenCfgEntry 12 } @@ -1175,7 +1176,7 @@ snBgp4NeighGenCfgHoldTime OBJECT-TYPE ::= { snBgp4NeighGenCfgEntry 18 } snBgp4NeighGenCfgDefOrigMap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1184,7 +1185,7 @@ snBgp4NeighGenCfgDefOrigMap OBJECT-TYPE ::= { snBgp4NeighGenCfgEntry 19 } snBgp4NeighGenCfgDesc OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..80)) + SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1192,7 +1193,7 @@ snBgp4NeighGenCfgDesc OBJECT-TYPE ::= { snBgp4NeighGenCfgEntry 20 } snBgp4NeighGenCfgPass OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..80)) + SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1223,21 +1224,21 @@ SnBgp4NeighDistGroupEntry ::= SEQUENCE { IpAddress, snBgp4NeighDistGroupDir INTEGER, - snBgp4NeighDistGroupAccessList + snBgp4NeighDistGroupAccessList OCTET STRING, snBgp4NeighDistGroupRowStatus INTEGER, - snBgp4NeighDistGroupInFilterList + snBgp4NeighDistGroupInFilterList OCTET STRING, - snBgp4NeighDistGroupOutFilterList + snBgp4NeighDistGroupOutFilterList OCTET STRING, - snBgp4NeighDistGroupInIpAccessList + snBgp4NeighDistGroupInIpAccessList OCTET STRING, - snBgp4NeighDistGroupOutIpAccessList + snBgp4NeighDistGroupOutIpAccessList OCTET STRING, - snBgp4NeighDistGroupInPrefixList + snBgp4NeighDistGroupInPrefixList OCTET STRING, - snBgp4NeighDistGroupOutPrefixList + snBgp4NeighDistGroupOutPrefixList OCTET STRING } @@ -1250,20 +1251,20 @@ snBgp4NeighDistGroupNeighIp OBJECT-TYPE ::= { snBgp4NeighDistGroupEntry 1 } snBgp4NeighDistGroupDir OBJECT-TYPE - SYNTAX INTEGER { out(0), in(1) } + SYNTAX INTEGER { out(0), in(1) } MAX-ACCESS read-only STATUS current DESCRIPTION - "The incoming/outgoing advertisements to which + "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighDistGroupEntry 2 } snBgp4NeighDistGroupAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 3 } @@ -1298,55 +1299,55 @@ snBgp4NeighDistGroupRowStatus OBJECT-TYPE ::= { snBgp4NeighDistGroupEntry 4 } snBgp4NeighDistGroupInFilterList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 5 } snBgp4NeighDistGroupOutFilterList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 6 } snBgp4NeighDistGroupInIpAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..2)) + SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 1 of them. + "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 7 } snBgp4NeighDistGroupOutIpAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..2)) + SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 1 of them. + "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 8 } snBgp4NeighDistGroupInPrefixList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A Prefix name list. " + "A Prefix name list. " ::= { snBgp4NeighDistGroupEntry 9 } snBgp4NeighDistGroupOutPrefixList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A Prefix name list. " + "A Prefix name list. " ::= { snBgp4NeighDistGroupEntry 10 } -- Bgp4 Neighbor Filter Group Table @@ -1373,21 +1374,21 @@ SnBgp4NeighFilterGroupEntry ::= SEQUENCE { IpAddress, snBgp4NeighFilterGroupDir INTEGER, - snBgp4NeighFilterGroupAccessList + snBgp4NeighFilterGroupAccessList OCTET STRING, snBgp4NeighFilterGroupRowStatus INTEGER, - snBgp4NeighFilterGroupInFilterList + snBgp4NeighFilterGroupInFilterList OCTET STRING, - snBgp4NeighFilterGroupOutFilterList + snBgp4NeighFilterGroupOutFilterList OCTET STRING, - snBgp4NeighFilterGroupInAsPathAccessList + snBgp4NeighFilterGroupInAsPathAccessList OCTET STRING, - snBgp4NeighFilterGroupOutAsPathAccessList + snBgp4NeighFilterGroupOutAsPathAccessList OCTET STRING, - snBgp4NeighFilterGroupWeight + snBgp4NeighFilterGroupWeight INTEGER, - snBgp4NeighFilterGroupWeightAccessList + snBgp4NeighFilterGroupWeightAccessList OCTET STRING } @@ -1400,20 +1401,20 @@ snBgp4NeighFilterGroupNeighIp OBJECT-TYPE ::= { snBgp4NeighFilterGroupEntry 1 } snBgp4NeighFilterGroupDir OBJECT-TYPE - SYNTAX INTEGER { out(0), in(1) } + SYNTAX INTEGER { out(0), in(1) } MAX-ACCESS read-only STATUS current DESCRIPTION - "The incoming/outgoing advertisements to which + "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighFilterGroupEntry 2 } snBgp4NeighFilterGroupAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 3 } @@ -1448,38 +1449,38 @@ snBgp4NeighFilterGroupRowStatus OBJECT-TYPE ::= { snBgp4NeighFilterGroupEntry 4 } snBgp4NeighFilterGroupInFilterList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 5 } snBgp4NeighFilterGroupOutFilterList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 16 of them. + "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 6 } snBgp4NeighFilterGroupInAsPathAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..2)) + SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 1 of them. + "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 7 } snBgp4NeighFilterGroupOutAsPathAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..2)) + SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 1 of them. + "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 8 } @@ -1492,11 +1493,11 @@ snBgp4NeighFilterGroupWeight OBJECT-TYPE ::= { snBgp4NeighFilterGroupEntry 9 } snBgp4NeighFilterGroupWeightAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..2)) + SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF. There are 1 of them. + "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 10 } @@ -1524,7 +1525,7 @@ SnBgp4NeighRouteMapEntry ::= SEQUENCE { IpAddress, snBgp4NeighRouteMapDir INTEGER, - snBgp4NeighRouteMapMapName + snBgp4NeighRouteMapMapName OCTET STRING, snBgp4NeighRouteMapRowStatus INTEGER @@ -1539,16 +1540,16 @@ snBgp4NeighRouteMapNeighIp OBJECT-TYPE ::= { snBgp4NeighRouteMapEntry 1 } snBgp4NeighRouteMapDir OBJECT-TYPE - SYNTAX INTEGER { out(0), in(1) } + SYNTAX INTEGER { out(0), in(1) } MAX-ACCESS read-only STATUS current DESCRIPTION - "The incoming/outgoing advertisements to which + "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighRouteMapEntry 2 } snBgp4NeighRouteMapMapName OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1609,7 +1610,7 @@ snBgp4NetworkEntry OBJECT-TYPE SnBgp4NetworkEntry ::= SEQUENCE { snBgp4NetworkIp IpAddress, - snBgp4NetworkSubnetMask + snBgp4NetworkSubnetMask IpAddress, snBgp4NetworkWeight INTEGER, @@ -1698,7 +1699,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "The BGP4 Redistribution Entry specifies a particular RIP + "The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain." INDEX { snBgp4RedisProtocol } ::= { snBgp4RedisTable 1 } @@ -1735,7 +1736,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The imported configuration into BGP4 domain is set in the following: + "The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. @@ -1746,14 +1747,14 @@ snBgp4NetworkRowStatus OBJECT-TYPE snBgp4RedisMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The metric of using the specified protocol Metric value." ::= { snBgp4RedisEntry 2 } snBgp4RedisRouteMap OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1764,7 +1765,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE snBgp4RedisWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "To assign a weight for the specified protocol." ::= { snBgp4RedisEntry 4 } @@ -1772,7 +1773,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE snBgp4RedisMatchInternal OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 5 } @@ -1780,7 +1781,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE snBgp4RedisMatchExternal1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 6 } @@ -1788,7 +1789,7 @@ snBgp4NetworkRowStatus OBJECT-TYPE snBgp4RedisMatchExternal2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 7 } @@ -1847,7 +1848,7 @@ SnBgp4RouteMapFilterEntry ::= SEQUENCE { OCTET STRING, snBgp4RouteMapFilterSequenceNum Integer32, - snBgp4RouteMapFilterAction + snBgp4RouteMapFilterAction INTEGER, snBgp4RouteMapFilterRowStatus INTEGER @@ -1871,7 +1872,7 @@ snBgp4RouteMapFilterSequenceNum OBJECT-TYPE ::= { snBgp4RouteMapFilterEntry 2 } snBgp4RouteMapFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1941,11 +1942,11 @@ SnBgp4RouteMapMatchEntry ::= SEQUENCE { OCTET STRING, snBgp4RouteMapMatchAddressFilter OCTET STRING, - snBgp4RouteMapMatchMetric + snBgp4RouteMapMatchMetric Integer32, snBgp4RouteMapMatchNextHopList OCTET STRING, - snBgp4RouteMapMatchRouteType + snBgp4RouteMapMatchRouteType INTEGER, snBgp4RouteMapMatchTagList OCTET STRING, @@ -1983,31 +1984,31 @@ snBgp4RouteMapMatchSequenceNum OBJECT-TYPE ::= { snBgp4RouteMapMatchEntry 2 } snBgp4RouteMapMatchAsPathFilter OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..20)) + SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list." ::= { snBgp4RouteMapMatchEntry 3 } snBgp4RouteMapMatchCommunityFilter OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..20)) + SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list." ::= { snBgp4RouteMapMatchEntry 4 } snBgp4RouteMapMatchAddressFilter OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..20)) + SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 5 } @@ -2021,34 +2022,34 @@ snBgp4RouteMapMatchMetric OBJECT-TYPE ::= { snBgp4RouteMapMatchEntry 6 } snBgp4RouteMapMatchNextHopList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list." ::= { snBgp4RouteMapMatchEntry 7 } snBgp4RouteMapMatchRouteType OBJECT-TYPE SYNTAX INTEGER { - none(0), - external(1), - externalType1(2), - externalType2(3), - internal(4), - local(5) + none(0), + external(1), + externalType1(2), + externalType2(3), + internal(4), + local(5) } MAX-ACCESS read-write STATUS current DESCRIPTION - "To match a route-type. - Currently only externalType1(2), + "To match a route-type. + Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET." ::= { snBgp4RouteMapMatchEntry 8 } snBgp4RouteMapMatchTagList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2056,14 +2057,14 @@ snBgp4RouteMapMatchTagList OBJECT-TYPE ::= { snBgp4RouteMapMatchEntry 9 } snBgp4RouteMapMatchRowMask OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. - The bit number is referred to the + The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, @@ -2071,60 +2072,60 @@ snBgp4RouteMapMatchRowMask OBJECT-TYPE ::= { snBgp4RouteMapMatchEntry 10 } snBgp4RouteMapMatchAsPathAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..20)) + SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. + "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list." ::= { snBgp4RouteMapMatchEntry 11 } snBgp4RouteMapMatchCommunityList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..20)) + SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. + "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list." ::= { snBgp4RouteMapMatchEntry 12 } snBgp4RouteMapMatchAddressAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..10)) + SYNTAX OCTET STRING (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 13 } snBgp4RouteMapMatchAddressPrefixList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..170)) + SYNTAX OCTET STRING (SIZE(0..170)) MAX-ACCESS read-write STATUS current DESCRIPTION - "Prefix list + "Prefix list To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 14 } snBgp4RouteMapMatchNextHopAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..10)) + SYNTAX OCTET STRING (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. + "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 15 } snBgp4RouteMapMatchNextHopPrefixList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..170)) + SYNTAX OCTET STRING (SIZE(0..170)) MAX-ACCESS read-write STATUS current DESCRIPTION - "Prefix list + "Prefix list To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 16 } @@ -2150,35 +2151,35 @@ snBgp4RouteMapSetEntry OBJECT-TYPE SnBgp4RouteMapSetEntry ::= SEQUENCE { snBgp4RouteMapSetMapName OCTET STRING, - snBgp4RouteMapSetSequenceNum + snBgp4RouteMapSetSequenceNum Integer32, - snBgp4RouteMapSetAsPathType + snBgp4RouteMapSetAsPathType INTEGER, snBgp4RouteMapSetAsPathString OCTET STRING, - snBgp4RouteMapSetAutoTag + snBgp4RouteMapSetAutoTag INTEGER, - snBgp4RouteMapSetCommunityType + snBgp4RouteMapSetCommunityType INTEGER, - snBgp4RouteMapSetCommunityNum + snBgp4RouteMapSetCommunityNum Integer32, - snBgp4RouteMapSetCommunityAdditive + snBgp4RouteMapSetCommunityAdditive INTEGER, - snBgp4RouteMapSetLocalPreference + snBgp4RouteMapSetLocalPreference Integer32, - snBgp4RouteMapSetMetric + snBgp4RouteMapSetMetric Integer32, - snBgp4RouteMapSetNextHop + snBgp4RouteMapSetNextHop IpAddress, - snBgp4RouteMapSetOrigin + snBgp4RouteMapSetOrigin INTEGER, - snBgp4RouteMapSetTag + snBgp4RouteMapSetTag Integer32, - snBgp4RouteMapSetWeight + snBgp4RouteMapSetWeight INTEGER, snBgp4RouteMapSetRowMask Integer32, - snBgp4RouteMapSetCommunityNums + snBgp4RouteMapSetCommunityNums OCTET STRING, snBgp4RouteMapSetDampenHalfLife INTEGER, @@ -2212,14 +2213,14 @@ snBgp4RouteMapSetAsPathType OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "To modify an autonomous system path for BGP routes. + "To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. - prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the + prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map." ::= { snBgp4RouteMapSetEntry 3 } snBgp4RouteMapSetAsPathString OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2259,7 +2260,7 @@ snBgp4RouteMapSetCommunityAdditive OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "To add the community to the already existing communities." + "To add the community to the already existing communities." ::= { snBgp4RouteMapSetEntry 8 } snBgp4RouteMapSetLocalPreference OBJECT-TYPE @@ -2318,9 +2319,9 @@ snBgp4RouteMapSetRowMask OBJECT-TYPE "This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. - The bit number is referred to the + The bit number is referred to the snBgp4RouteMapSetEntry number - of each row in the table. + of each row in the table. The bit is ON - means set, The bit is OFF - means reset" ::= { snBgp4RouteMapSetEntry 15 } @@ -2330,7 +2331,7 @@ snBgp4RouteMapSetCommunityNums OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Community number is from 1 to 0xFFFFFFFF. There are 6 of them. + "Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs." ::= { snBgp4RouteMapSetEntry 16 } @@ -2402,13 +2403,13 @@ SnBgp4NeighOperStatusEntry ::= SEQUENCE { Integer32, snBgp4NeighOperStatusAdvertlevel Integer32, - snBgp4NeighOperStatusKeepAliveTxCounts + snBgp4NeighOperStatusKeepAliveTxCounts Counter32, - snBgp4NeighOperStatusKeepAliveRxCounts + snBgp4NeighOperStatusKeepAliveRxCounts Counter32, - snBgp4NeighOperStatusUpdateTxCounts + snBgp4NeighOperStatusUpdateTxCounts Counter32, - snBgp4NeighOperStatusUpdateRxCounts + snBgp4NeighOperStatusUpdateRxCounts Counter32, snBgp4NeighOperStatusNotifTxCounts Counter32, @@ -2425,7 +2426,7 @@ snBgp4NeighOperStatusIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The index for a neighbor entry." + "The index for a neighbor entry." ::= { snBgp4NeighOperStatusEntry 1 } snBgp4NeighOperStatusIp OBJECT-TYPE @@ -2453,14 +2454,14 @@ snBgp4NeighOperStatusBgpType OBJECT-TYPE ::= { snBgp4NeighOperStatusEntry 4 } snBgp4NeighOperStatusState OBJECT-TYPE - SYNTAX INTEGER { - noState(0), - idle(1), - connect(2), - active(3), - openSent(4), - openConfirm(5), - established(6) + SYNTAX INTEGER { + noState(0), + idle(1), + connect(2), + active(3), + openSent(4), + openConfirm(5), + established(6) } MAX-ACCESS read-only STATUS current @@ -2469,7 +2470,7 @@ snBgp4NeighOperStatusState OBJECT-TYPE ::= { snBgp4NeighOperStatusEntry 5 } snBgp4NeighOperStatusKeepAliveTime OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2477,7 +2478,7 @@ snBgp4NeighOperStatusKeepAliveTime OBJECT-TYPE ::= { snBgp4NeighOperStatusEntry 6 } snBgp4NeighOperStatusHoldTime OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2489,7 +2490,7 @@ snBgp4NeighOperStatusAdvertlevel OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "To show the minimum interval between the + "To show the minimum interval between the sending of BGP routing updates." ::= { snBgp4NeighOperStatusEntry 8 } @@ -2604,11 +2605,11 @@ SnBgp4RouteOperStatusEntry ::= SEQUENCE { } snBgp4RouteOperStatusIndex OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION - "The index for a route entry." + "The index for a route entry." ::= { snBgp4RouteOperStatusEntry 1 } snBgp4RouteOperStatusIp OBJECT-TYPE @@ -2652,7 +2653,7 @@ snBgp4RouteOperStatusLocalPreference OBJECT-TYPE ::= { snBgp4RouteOperStatusEntry 6 } snBgp4RouteOperStatusWeight OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2660,8 +2661,8 @@ snBgp4RouteOperStatusWeight OBJECT-TYPE ::= { snBgp4RouteOperStatusEntry 7 } snBgp4RouteOperStatusOrigin OBJECT-TYPE - SYNTAX INTEGER { - igp(0), + SYNTAX INTEGER { + igp(0), egp(1), incomplete(2) } @@ -2693,7 +2694,7 @@ snBgp4RouteOperStatusStatus OBJECT-TYPE ::= { snBgp4RouteOperStatusEntry 9 } snBgp4RouteOperStatusRouteTag OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2701,27 +2702,27 @@ snBgp4RouteOperStatusRouteTag OBJECT-TYPE ::= { snBgp4RouteOperStatusEntry 10 } snBgp4RouteOperStatusCommunityList OBJECT-TYPE - SYNTAX OCTET STRING + SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "To show the community list of this route. If the community list is an NULL string that means an empty list, then - the community is INTERNET. A number from 1 to 0xFFFFFFFF. + the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. - In the community list, it could have some Well-known numbers such as: + In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02" ::= { snBgp4RouteOperStatusEntry 11 } snBgp4RouteOperStatusAsPathList OBJECT-TYPE - SYNTAX OCTET STRING + SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "To show the AS Path list of this route. - A number from 1 to 0xFFFF. + A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs." ::= { snBgp4RouteOperStatusEntry 12 } @@ -2764,7 +2765,7 @@ snBgp4NeighborSummaryIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The index for a route entry." + "The index for a route entry." ::= { snBgp4NeighborSummaryEntry 1 } snBgp4NeighborSummaryIp OBJECT-TYPE @@ -2776,14 +2777,14 @@ snBgp4NeighborSummaryIp OBJECT-TYPE ::= { snBgp4NeighborSummaryEntry 2 } snBgp4NeighborSummaryState OBJECT-TYPE - SYNTAX INTEGER { - noState(0), - idle(1), - connect(2), - active(3), - openSent(4), - openConfirm(5), - established(6) + SYNTAX INTEGER { + noState(0), + idle(1), + connect(2), + active(3), + openSent(4), + openConfirm(5), + established(6) } MAX-ACCESS read-only STATUS current @@ -2792,7 +2793,7 @@ snBgp4NeighborSummaryState OBJECT-TYPE ::= { snBgp4NeighborSummaryEntry 3 } snBgp4NeighborSummaryStateChgTime OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2800,7 +2801,7 @@ snBgp4NeighborSummaryStateChgTime OBJECT-TYPE ::= { snBgp4NeighborSummaryEntry 4 } snBgp4NeighborSummaryRouteReceived OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2808,7 +2809,7 @@ snBgp4NeighborSummaryRouteReceived OBJECT-TYPE ::= { snBgp4NeighborSummaryEntry 5 } snBgp4NeighborSummaryRouteInstalled OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2862,11 +2863,11 @@ SnBgp4AttributeEntry ::= SEQUENCE { } snBgp4AttributeIndex OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION - "The index for a route entry." + "The index for a route entry." ::= { snBgp4AttributeEntry 1 } snBgp4AttributeNextHop OBJECT-TYPE @@ -2886,8 +2887,8 @@ snBgp4AttributeMetric OBJECT-TYPE ::= { snBgp4AttributeEntry 3 } snBgp4AttributeOrigin OBJECT-TYPE - SYNTAX INTEGER { - igp(0), + SYNTAX INTEGER { + igp(0), egp(1), incomplete(2) } @@ -2930,27 +2931,27 @@ snBgp4AttributeLocalPreference OBJECT-TYPE ::= { snBgp4AttributeEntry 8 } snBgp4AttributeCommunityList OBJECT-TYPE - SYNTAX OCTET STRING + SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then - the community is INTERNET. A number from 1 to 0xFFFFFFFF. + the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. - In the community list, it could have some Well-known numbers such as: + In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02" ::= { snBgp4AttributeEntry 9 } snBgp4AttributeAsPathList OBJECT-TYPE - SYNTAX OCTET STRING + SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "To show the AS Path list of this attribute entry. - A number from 1 to 0xFFFF. + A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs." ::= { snBgp4AttributeEntry 10 } @@ -2963,12 +2964,12 @@ snBgp4AttributeOriginator OBJECT-TYPE ::= { snBgp4AttributeEntry 11 } snBgp4AttributeClusterList OBJECT-TYPE - SYNTAX OCTET STRING + SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "To show the cluster list of this attribute entry. - If the cluster list is an NULL string, it means an empty list. + If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address." ::= { snBgp4AttributeEntry 12 } @@ -3004,19 +3005,19 @@ snBgp4ClearNeighborCmdIp OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The IP Address for a neighbor entry. + "The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors." ::= { snBgp4ClearNeighborCmdEntry 1 } snBgp4ClearNeighborCmdElement OBJECT-TYPE - SYNTAX INTEGER { - valid(0), - lastPacketWithError(1), - notificationErrors(2), - softOutbound(3), - traffic(4), - neighbor(5) + SYNTAX INTEGER { + valid(0), + lastPacketWithError(1), + notificationErrors(2), + softOutbound(3), + traffic(4), + neighbor(5) } MAX-ACCESS read-write STATUS current @@ -3049,9 +3050,9 @@ SnBgp4NeighPrefixGroupEntry ::= SEQUENCE { IpAddress, snBgp4NeighPrefixGroupDir INTEGER, - snBgp4NeighPrefixGroupInAccessList + snBgp4NeighPrefixGroupInAccessList OCTET STRING, - snBgp4NeighPrefixGroupOutAccessList + snBgp4NeighPrefixGroupOutAccessList OCTET STRING, snBgp4NeighPrefixGroupRowStatus INTEGER @@ -3066,28 +3067,28 @@ snBgp4NeighPrefixGroupNeighIp OBJECT-TYPE ::= { snBgp4NeighPrefixGroupEntry 1 } snBgp4NeighPrefixGroupDir OBJECT-TYPE - SYNTAX INTEGER { out(0), in(1) } + SYNTAX INTEGER { out(0), in(1) } MAX-ACCESS read-only STATUS current DESCRIPTION - "The incoming/outgoing advertisements to which + "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighPrefixGroupEntry 2 } snBgp4NeighPrefixGroupInAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "An in access prefix list name. " + "An in access prefix list name. " ::= { snBgp4NeighPrefixGroupEntry 3 } snBgp4NeighPrefixGroupOutAccessList OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) + SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "An out prefix list name. " + "An out prefix list name. " ::= { snBgp4NeighPrefixGroupEntry 4 } snBgp4NeighPrefixGroupRowStatus OBJECT-TYPE diff --git a/foundry/FOUNDRY-SN-IP-MIB.mib b/foundry/FOUNDRY-SN-IP-MIB.mib index d50030044..a94bc37c1 100644 --- a/foundry/FOUNDRY-SN-IP-MIB.mib +++ b/foundry/FOUNDRY-SN-IP-MIB.mib @@ -3,60 +3,57 @@ FOUNDRY-SN-IP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Counter32, TimeTicks,Counter64,Integer32 FROM SNMPv2-SMI - + TEXTUAL-CONVENTION FROM SNMPv2-TC router,snRip, snDvmrp, snFsrp,snGblRt, snPim, snLoopbackIf FROM FOUNDRY-SN-ROOT-MIB - - InterfaceIndex, ifIndex, InterfaceIndexOrZero + + InterfaceIndex, ifIndex, InterfaceIndexOrZero FROM IF-MIB - InetAddressType + InetAddressType, InetAddress FROM INET-ADDRESS-MIB - + DisplayString FROM FOUNDRY-SN-AGENT-MIB - + PortMask FROM FOUNDRY-SN-SWITCH-GROUP-MIB; - + snIp MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201312310000Z" -- 31 December 2013 - DESCRIPTION - "Changed the range of the object snLoopbackIntfConfigPortIndex from 1..8 to 1..64" - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { router 2 } -- textual conventions @@ -68,7 +65,7 @@ snIp MODULE-IDENTITY RtrStatus Values " SYNTAX INTEGER { disabled(0), enabled (1) } - + ClearStatus ::= TEXTUAL-CONVENTION @@ -90,16 +87,16 @@ snIp MODULE-IDENTITY valid(2), delete(3), create(4) - } + } PortIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " - The bits 0-7 = port number. + The bits 0-7 = port number. The bits 8-15 = slot number (slot for chassis only). ve port format bits 16-24 = 0x01, bits 0-15 = ve number - loopback port format bits 16-24 = 0x02, bits 0-15= lb number + loopback port format bits 16-24 = 0x02, bits 0-15= lb number " SYNTAX Integer32 @@ -119,10 +116,10 @@ snIp MODULE-IDENTITY " The OSPF Metric is defined as an unsigned value in the range " - SYNTAX INTEGER (0..65535) + SYNTAX INTEGER (0..65535) --- SECTION 2: MIB +-- SECTION 2: MIB -- Global Router MIB -- This section contains global MIB object definitions applicable to the @@ -148,7 +145,7 @@ snGblRtRouteOnly OBJECT-TYPE -- IP general group snRtIpGeneral OBJECT IDENTIFIER ::= { snIp 1 } - + snRtClearArpCache OBJECT-TYPE SYNTAX ClearStatus MAX-ACCESS read-write @@ -187,9 +184,9 @@ snRtBootpRelayMax OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Maximum number of hop the bootp packet + "Maximum number of hop the bootp packet should travel." - ::= { snRtIpGeneral 5 } + ::= { snRtIpGeneral 5 } snRtArpAge OBJECT-TYPE SYNTAX INTEGER (0..240) @@ -197,7 +194,7 @@ snRtArpAge OBJECT-TYPE STATUS current DESCRIPTION "The time in minutes an ARP entry can - be valid without relearning. + be valid without relearning. 0 - Don't not age." ::= { snRtIpGeneral 6 } @@ -223,7 +220,7 @@ snRtIpProxyArp OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Enable/disable proxy arp function + "Enable/disable proxy arp function in the box." ::= { snRtIpGeneral 9 } @@ -354,12 +351,10 @@ snRtIpStaticRouteEntry OBJECT-TYPE STATUS current DESCRIPTION "An entry in the IP static route table." - INDEX { snRtIpStaticRouteIndex } + INDEX { snRtIpStaticRouteDest,snRtIpStaticRouteMask } ::= { snRtIpStaticRouteTable 1 } SnRtIpStaticRouteEntry ::= SEQUENCE { - snRtIpStaticRouteIndex - Integer32, snRtIpStaticRouteDest IpAddress, snRtIpStaticRouteMask @@ -371,17 +366,11 @@ SnRtIpStaticRouteEntry ::= SEQUENCE { snRtIpStaticRouteRowStatus RowSts, snRtIpStaticRouteDistance - INTEGER + INTEGER, + snRtIpStaticRouteOutgoingInterface + InterfaceIndexOrZero } -snRtIpStaticRouteIndex OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The table index for a static route entry." - ::= { snRtIpStaticRouteEntry 1 } - snRtIpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write @@ -389,17 +378,17 @@ snRtIpStaticRouteDest OBJECT-TYPE DESCRIPTION "Destination IP address. 0.0.0.0 for default route." - ::= { snRtIpStaticRouteEntry 2 } + ::= { snRtIpStaticRouteEntry 1 } snRtIpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION - "Subnet mask associated with + "Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask." - ::= { snRtIpStaticRouteEntry 3 } + ::= { snRtIpStaticRouteEntry 2 } snRtIpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress @@ -409,7 +398,7 @@ snRtIpStaticRouteNextHop OBJECT-TYPE "IP address of next hop router that is located on one of the directly attached IP subnet." - ::= { snRtIpStaticRouteEntry 4 } + ::= { snRtIpStaticRouteEntry 3 } snRtIpStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 @@ -417,7 +406,7 @@ snRtIpStaticRouteMetric OBJECT-TYPE STATUS current DESCRIPTION "The metrics to next hop router." - ::= { snRtIpStaticRouteEntry 5 } + ::= { snRtIpStaticRouteEntry 4 } snRtIpStaticRouteRowStatus OBJECT-TYPE SYNTAX RowSts @@ -426,7 +415,7 @@ snRtIpStaticRouteRowStatus OBJECT-TYPE DESCRIPTION "To create or delete a static route entry." - ::= { snRtIpStaticRouteEntry 6 } + ::= { snRtIpStaticRouteEntry 5 } snRtIpStaticRouteDistance OBJECT-TYPE SYNTAX INTEGER (1..255) @@ -434,7 +423,17 @@ snRtIpStaticRouteDistance OBJECT-TYPE STATUS current DESCRIPTION "Administration distance." - ::= { snRtIpStaticRouteEntry 7 } + ::= { snRtIpStaticRouteEntry 6 } +snRtIpStaticRouteOutgoingInterface OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outgoing interface of a static route. + Use the ifIndex value here to specify the outgoing interface. + Value of 0 indicates that outgoing interface has not been + configured for a static route." + ::= { snRtIpStaticRouteEntry 7 } -- ip filter table @@ -458,9 +457,9 @@ snRtIpFilterEntry OBJECT-TYPE SnRtIpFilterEntry ::= SEQUENCE { snRtIpFilterIndex Integer32, - snRtIpFilterAction + snRtIpFilterAction INTEGER, - snRtIpFilterProtocol + snRtIpFilterProtocol INTEGER, snRtIpFilterSourceIp IpAddress, @@ -491,7 +490,7 @@ snRtIpFilterIndex OBJECT-TYPE ::= { snRtIpFilterEntry 1 } snRtIpFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1), qosEnabled(2) } + SYNTAX INTEGER { deny(0), permit(1), qosEnabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -554,7 +553,7 @@ snRtIpFilterOperand OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "For now this only refers to transport + "For now this only refers to transport protocol port number. 0 means NA" ::= { snRtIpFilterEntry 9 } @@ -869,7 +868,7 @@ snRtIpPortAccessFilters OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "1st octet correspond to 1st filter + "1st octet correspond to 1st filter number and so on." ::= { snRtIpPortAccessEntry 3 } @@ -934,7 +933,7 @@ snRtIpPortMtu OBJECT-TYPE ::= { snRtIpPortConfigEntry 2 } snRtIpPortEncap OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { ethernet(1), snap(2), hdlc(3), @@ -1093,7 +1092,7 @@ snRtIpPortIfAccessFilters OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "1st octet correspond to 1st filter + "1st octet correspond to 1st filter number and so on." ::= { snRtIpPortIfAccessEntry 3 } @@ -1135,9 +1134,7 @@ SnRtIpPortIfConfigEntry ::= SEQUENCE { snRtIpPortIfMetric INTEGER, snRtIpPortIfDirBcastFwd - RtrStatus, - snRtIpPortConfigIfDonorInterface - InterfaceIndexOrZero + RtrStatus } snRtIpPortIfConfigInterfaceIndex OBJECT-TYPE @@ -1162,7 +1159,7 @@ snRtIpPortIfMtu OBJECT-TYPE ::= { snRtIpPortIfConfigEntry 2 } snRtIpPortIfEncap OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { ethernet(1), snap(2), hdlc(3), @@ -1195,20 +1192,6 @@ snRtIpPortIfDirBcastFwd OBJECT-TYPE DEFVAL { enabled } ::= { snRtIpPortIfConfigEntry 5 } - -snRtIpPortConfigIfDonorInterface OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "If this interface is configured as an unnumbered - interface, it will return the ifIndex of the donor - interface. If this is configured as a donor interface, it - will return its own ifIndex value. Otherwise, it will - return 0." - ::= { snRtIpPortIfConfigEntry 6 } - - -- IP Interface Counter table agIpPortCounterTable OBJECT-TYPE @@ -1496,7 +1479,7 @@ snRtUdpIfHelperEntry OBJECT-TYPE "An entry of the UDP helper table." INDEX { snRtUdpIfHelperPortIndex, snRtUdpIfHelperAddr } ::= { snRtUdpIfHelperTable 1 } - + SnRtUdpIfHelperEntry ::= SEQUENCE { snRtUdpIfHelperPortIndex InterfaceIndex, @@ -1547,6 +1530,137 @@ snRtUdpIfHelperRowStatus OBJECT-TYPE "To create or delete a UDP helper entry." ::= { snRtUdpIfHelperEntry 4 } +-- UDP helper table +-- The table indexes are ifIndex and helper address index + +snRtIpIfHelperTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnRtIpIfHelperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IP helper address table." + ::= { snRtUdpHelper 3 } + +snRtIpIfHelperEntry OBJECT-TYPE + SYNTAX SnRtIpIfHelperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the IP helper address table." + INDEX { snRtIpIfHelperIfIndex, snRtIpIfHelperAddrIndex } + ::= { snRtIpIfHelperTable 1 } + +SnRtIpIfHelperEntry ::= SEQUENCE { + snRtIpIfHelperIfIndex + InterfaceIndex, + snRtIpIfHelperAddrIndex + INTEGER, + snRtIpIfHelperAddr + IpAddress, + snRtIpIfHelperAddrType + INTEGER, + snRtIpIfHelperRowStatus + RowSts + } + +snRtIpIfHelperIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Interface index of the port for an IP helper address entry." + ::= { snRtIpIfHelperEntry 1 } + +snRtIpIfHelperAddrIndex OBJECT-TYPE + SYNTAX INTEGER (1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The helper address table index for an IP helper address entry." + ::= { snRtIpIfHelperEntry 2 } + +snRtIpIfHelperAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP helper address. This is the address that + UDP packets will be forwarded. It can be a helper + address or a subnet broadcast address. But it + cannot be 255.255.255.255 or 0.0.0.0." + ::= { snRtIpIfHelperEntry 3 } + +snRtIpIfHelperAddrType OBJECT-TYPE + SYNTAX INTEGER { + unicast(1), + broadcast(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Type of the helper address. It can be unicast or subnet + broadcast address." + ::= { snRtIpIfHelperEntry 4} + +snRtIpIfHelperRowStatus OBJECT-TYPE + SYNTAX RowSts + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To create or delete an IP helper entry." + ::= { snRtIpIfHelperEntry 5 } + +snRtIpv6IfHelperTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnRtIpv6IfHelperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPV6 helper address table." + ::= { snRtUdpHelper 4 } + +snRtIpv6IfHelperEntry OBJECT-TYPE + SYNTAX SnRtIpv6IfHelperEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of the IPV6 helper address table." + INDEX { snRtIpv6IfHelperIfIndex, snRtIpv6IfHelperAddr} + ::= { snRtIpv6IfHelperTable 1 } + +SnRtIpv6IfHelperEntry ::= SEQUENCE { + snRtIpv6IfHelperIfIndex + InterfaceIndex, + snRtIpv6IfHelperAddr + InetAddress, + snRtIpv6IfHelperRowStatus + RowSts + } + +snRtIpv6IfHelperIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Interface index of the port for an IPV6 helper address entry." + ::= { snRtIpv6IfHelperEntry 1 } + +snRtIpv6IfHelperAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPV6 helper address. This is the address that + client packets will be forwarded" + ::= { snRtIpv6IfHelperEntry 2 } + +snRtIpv6IfHelperRowStatus OBJECT-TYPE + SYNTAX RowSts + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To create or delete an IPV6IfhelperEntry." + ::= { snRtIpv6IfHelperEntry 3 } + -- Trace route group -- This group uses the following method to detect routes used to reach -- a destination address. The originating router sends a probe packet @@ -1623,7 +1737,7 @@ snRtIpTraceRouteControl OBJECT-TYPE "Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. - + Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. @@ -1883,7 +1997,7 @@ SnIpAsPathAccessListEntry ::= SEQUENCE { Integer32, snIpAsPathAccessListSequence Integer32, - snIpAsPathAccessListAction + snIpAsPathAccessListAction INTEGER, snIpAsPathAccessListRegExpression OCTET STRING, @@ -1908,7 +2022,7 @@ snIpAsPathAccessListSequence OBJECT-TYPE ::= { snIpAsPathAccessListEntry 2 } snIpAsPathAccessListAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1981,7 +2095,7 @@ SnIpCommunityListEntry ::= SEQUENCE { Integer32, snIpCommunityListSequence Integer32, - snIpCommunityListAction + snIpCommunityListAction INTEGER, snIpCommunityListCommNum OCTET STRING, @@ -2014,7 +2128,7 @@ snIpCommunityListSequence OBJECT-TYPE ::= { snIpCommunityListEntry 2 } snIpCommunityListAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2027,12 +2141,12 @@ snIpCommunityListCommNum OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFFFFFF. There are 20 of them. + "A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs." ::= { snIpCommunityListEntry 4 } snIpCommunityListInternet OBJECT-TYPE - SYNTAX INTEGER { disabled(0), enabled(1) } + SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2040,7 +2154,7 @@ snIpCommunityListInternet OBJECT-TYPE ::= { snIpCommunityListEntry 5 } snIpCommunityListNoAdvertise OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2048,7 +2162,7 @@ snIpCommunityListNoAdvertise OBJECT-TYPE ::= { snIpCommunityListEntry 6 } snIpCommunityListNoExport OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2086,12 +2200,12 @@ snIpCommunityListRowStatus OBJECT-TYPE ::= { snIpCommunityListEntry 8 } snIpCommunityListLocalAs OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send this route to peers in other sub-autonomous systems within - the local confederation. Do not advertise this route to an + the local confederation. Do not advertise this route to an external system." ::= { snIpCommunityListEntry 9 } @@ -2122,12 +2236,12 @@ SnIpPrefixListEntry ::= SEQUENCE { Integer32, snIpPrefixListDesc OCTET STRING, - snIpPrefixListAction + snIpPrefixListAction INTEGER, snIpPrefixListAddr IpAddress, snIpPrefixListMask - IpAddress, + IpAddress, snIpPrefixListGeValue INTEGER, snIpPrefixListLeValue @@ -2165,7 +2279,7 @@ snIpPrefixListDesc OBJECT-TYPE ::= { snIpPrefixListEntry 3 } snIpPrefixListAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2269,7 +2383,7 @@ SnIpAsPathAccessListStringEntry ::= SEQUENCE { DisplayString, snIpAsPathAccessListStringSequence Integer32, - snIpAsPathAccessListStringAction + snIpAsPathAccessListStringAction INTEGER, snIpAsPathAccessListStringRegExpression DisplayString, @@ -2294,7 +2408,7 @@ snIpAsPathAccessListStringSequence OBJECT-TYPE ::= { snIpAsPathAccessListStringEntry 2 } snIpAsPathAccessListStringAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2367,7 +2481,7 @@ SnIpCommunityListStringEntry ::= SEQUENCE { DisplayString, snIpCommunityListStringSequence Integer32, - snIpCommunityListStringAction + snIpCommunityListStringAction INTEGER, snIpCommunityListStringCommNum OCTET STRING, @@ -2404,7 +2518,7 @@ snIpCommunityListStringSequence OBJECT-TYPE ::= { snIpCommunityListStringEntry 2 } snIpCommunityListStringAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2417,7 +2531,7 @@ snIpCommunityListStringCommNum OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "A number from 1 to 0xFFFFFFFF. There are 20 of them. + "A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. This object is valid for standard community list. For extended type, this will return NULL string. @@ -2426,7 +2540,7 @@ snIpCommunityListStringCommNum OBJECT-TYPE ::= { snIpCommunityListStringEntry 4 } snIpCommunityListStringInternet OBJECT-TYPE - SYNTAX INTEGER { disabled(0), enabled(1) } + SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2435,7 +2549,7 @@ snIpCommunityListStringInternet OBJECT-TYPE ::= { snIpCommunityListStringEntry 5 } snIpCommunityListStringNoAdvertise OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2444,7 +2558,7 @@ snIpCommunityListStringNoAdvertise OBJECT-TYPE ::= { snIpCommunityListStringEntry 6 } snIpCommunityListStringNoExport OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2483,18 +2597,18 @@ snIpCommunityListStringRowStatus OBJECT-TYPE ::= { snIpCommunityListStringEntry 8 } snIpCommunityListStringLocalAs OBJECT-TYPE - SYNTAX INTEGER { false(0), true(1) } + SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send this route to peers in other sub-autonomous systems within - the local confederation. Do not advertise this route to an + the local confederation. Do not advertise this route to an external system. Valid only for standard community list. For extended type, 0 is returned." ::= { snIpCommunityListStringEntry 9 } snIpCommunityListStringType OBJECT-TYPE - SYNTAX INTEGER { standard(0), extended(1) } + SYNTAX INTEGER { standard(0), extended(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2514,7 +2628,7 @@ snIpCommunityListStringRegExpr OBJECT-TYPE --- SECTION 2: MIB +-- SECTION 2: MIB -- Router IP RIP MIB @@ -2689,7 +2803,7 @@ snRtIpRipPortPoisonReverse OBJECT-TYPE snRtIpRipPortLearnDefault OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -2722,7 +2836,7 @@ snRtIpRipRedisEntry OBJECT-TYPE SnRtIpRipRedisEntry ::= SEQUENCE { snRtIpRipRedisIndex - INTEGER, + INTEGER, snRtIpRipRedisAction Action, snRtIpRipRedisProtocol @@ -2740,7 +2854,7 @@ SnRtIpRipRedisEntry ::= SEQUENCE { snRtIpRipRedisRouteMapName DisplayString } - + snRtIpRipRedisIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-only @@ -2754,7 +2868,7 @@ snRtIpRipRedisAction OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The action to take when match this + "The action to take when match this IP Rip Redistribution entry." ::= { snRtIpRipRedisEntry 2 } @@ -2763,8 +2877,8 @@ snRtIpRipRedisProtocol OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The protocol to be distributed. other(1) cannot be - used for SNMP-SET." + "The protocol to be distributed. other(1) cannot be + used for SNMP-SET." ::= { snRtIpRipRedisEntry 3 } snRtIpRipRedisIp OBJECT-TYPE @@ -2773,16 +2887,16 @@ snRtIpRipRedisIp OBJECT-TYPE STATUS current DESCRIPTION "The ip address of the ip route to be distributed. - 0.0.0.0 - all routes" + 0.0.0.0 - all routes" ::= { snRtIpRipRedisEntry 4 } - + snRtIpRipRedisMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION - "The ip subnet mask of the ip route to be distributed." + "The ip subnet mask of the ip route to be distributed." ::= { snRtIpRipRedisEntry 5 } snRtIpRipRedisMatchMetric OBJECT-TYPE @@ -2792,7 +2906,7 @@ snRtIpRipRedisMatchMetric OBJECT-TYPE DESCRIPTION "The metric of the route to be matched to determine the redistribution. - 0 - any metric value" + 0 - any metric value" ::= { snRtIpRipRedisEntry 6 } snRtIpRipRedisSetMetric OBJECT-TYPE @@ -2801,7 +2915,7 @@ snRtIpRipRedisSetMetric OBJECT-TYPE STATUS current DESCRIPTION "The new metric of the route to be advertised. - 0 - use the default metric." + 0 - use the default metric." ::= { snRtIpRipRedisEntry 7 } snRtIpRipRedisRowStatus OBJECT-TYPE @@ -2861,7 +2975,7 @@ snRtIpRipRouteFilterId OBJECT-TYPE ::= { snRtIpRipRouteFilterEntry 1 } snRtIpRipRouteFilterAction OBJECT-TYPE - SYNTAX Action + SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2958,7 +3072,7 @@ snRtIpRipNbrFilterId OBJECT-TYPE ::= { snRtIpRipNbrFilterEntry 1 } snRtIpRipNbrFilterAction OBJECT-TYPE - SYNTAX Action + SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION @@ -3154,7 +3268,7 @@ snRtIpRipPortIfPoisonReverse OBJECT-TYPE snRtIpRipPortIfLearnDefault OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -3481,9 +3595,8 @@ snDvmrpGraftRetransmitTime OBJECT-TYPE be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. - For FastIron platforms, the default value is 3 and the range is - between 2 to 10. - For NetIron platforms, the range is between 5 to 3600." + For FastIron platforms, the default value is 3 and the range is + between 2 to 10." DEFVAL { 10 } ::= { snDvmrpMIBObjects 11 } @@ -3881,7 +3994,7 @@ snDvmrpRouteMetric OBJECT-TYPE snDvmrpRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks - MAX-ACCESS read-only + MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will @@ -4191,7 +4304,7 @@ snFsrpIntf OBJECT IDENTIFIER ::= { snFsrp 2 } snFsrpGroupOperMode OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -4200,7 +4313,7 @@ snFsrpGroupOperMode OBJECT-TYPE "The FSRP is configured on this system either enabled or disabled and the default is disabled mode. - disabled(0)..........disable FSRP + disabled(0)..........disable FSRP enabled(1)...........activate FSRP" ::= { snFsrpGlobal 1 } @@ -4218,7 +4331,7 @@ snFsrpIfStateChangeTrap OBJECT-TYPE -- Section 2: FSRP Interface Configuration Table --- The FSRP (Foundry Standby Routing Protocol) Interface Table augments +-- The FSRP (Ruckus Wireless Standby Routing Protocol) Interface Table augments -- the ifTable with FSRP specific information. @@ -4255,13 +4368,13 @@ snFsrpIfStateChangeTrap OBJECT-TYPE INTEGER, snFsrpIfTrackPortMask PortMask, - snFsrpIfRowStatus + snFsrpIfRowStatus INTEGER, snFsrpIfState INTEGER, - snFsrpIfKeepAliveTime + snFsrpIfKeepAliveTime INTEGER, - snFsrpIfRouterDeadTime + snFsrpIfRouterDeadTime INTEGER, snFsrpIfChassisTrackPortMask OCTET STRING, @@ -4293,7 +4406,7 @@ snFsrpIfStateChangeTrap OBJECT-TYPE STATUS current DESCRIPTION "The IP Address of the Virtual Router for the interface. - The Virtual Router IP address need to be configured on + The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router @@ -4328,12 +4441,12 @@ snFsrpIfStateChangeTrap OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "This object specifies the identity of the physical port + "This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -4386,7 +4499,7 @@ snFsrpIfStateChangeTrap OBJECT-TYPE init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. - active(3)...active state." + active(3)...active state." ::= { snFsrpIfEntry 8 } snFsrpIfKeepAliveTime OBJECT-TYPE @@ -4394,7 +4507,7 @@ snFsrpIfStateChangeTrap OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The heart-beat is from 1 to 120 seconds." + "The heart-beat is from 1 to 120 seconds." DEFVAL { 3 } ::= { snFsrpIfEntry 9 } @@ -4403,7 +4516,7 @@ snFsrpIfStateChangeTrap OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The hold time of the Fsrp router is from 3 to 255 seconds." + "The hold time of the Fsrp router is from 3 to 255 seconds." DEFVAL { 9 } ::= { snFsrpIfEntry 10 } @@ -4412,12 +4525,12 @@ snFsrpIfStateChangeTrap OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "This object specifies the identity of the physical port + "This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -4431,14 +4544,14 @@ snFsrpIfStateChangeTrap OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "This object specifies the identity of the physical port + "This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -4461,7 +4574,7 @@ snPimEnable OBJECT-TYPE ::= { snPimMIBObjects 1 } snPimNeighborRouterTimeout OBJECT-TYPE - SYNTAX INTEGER (3..65535) + SYNTAX INTEGER (60..8000) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -4485,7 +4598,7 @@ snPimHelloTime OBJECT-TYPE ::= { snPimMIBObjects 3 } snPimPruneTime OBJECT-TYPE - SYNTAX INTEGER (60..3600) + SYNTAX INTEGER (10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -4497,19 +4610,21 @@ snPimPruneTime OBJECT-TYPE ::= { snPimMIBObjects 4 } snPimGraftRetransmitTime OBJECT-TYPE - SYNTAX INTEGER (10..3600) + SYNTAX INTEGER (2..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must - be 'enabled' before this object is writen." + be 'enabled' before this object is writen. + For FastIron platforms, the default value is 3 and the range is + between 2 to 10." DEFVAL { 180 } ::= { snPimMIBObjects 5 } snPimInactivityTime OBJECT-TYPE - SYNTAX INTEGER (2..3600) + SYNTAX INTEGER (10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -4518,10 +4633,7 @@ snPimInactivityTime OBJECT-TYPE time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object - is writen. - For FastIron platforms, the default value is 3 and the range is - between 2 to 10. - For NetIron platforms, the range is between 10 to 3600." + is writen." DEFVAL { 180 } ::= { snPimMIBObjects 6 } @@ -4953,8 +5065,8 @@ snPimJoinPruneInterval OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The default interval in seconds at which periodic - PIM-SM Join/Prune messages are to be sent. snPimEnable must + "The default interval in seconds at which periodic + PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen." ::= { snPimSMMIBObjects 1 } @@ -4990,7 +5102,7 @@ snPimCandidateBSRPortID OBJECT-TYPE STATUS current DESCRIPTION "The IP address of the PIM interface. - The bit 0 to bit 7: port number. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number." ::= { snPimCandidateBSREntry 1 } @@ -5089,7 +5201,7 @@ snPimRPSetHoldTime OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The holdtime, in seconds, of a Candidate-RP. If the + "The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0." ::= { snPimRPSetEntry 4 } @@ -5169,18 +5281,18 @@ snPimCandidateRPRowStatus OBJECT-TYPE DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. - This object is used to create and delete row in the - table and control if they are used. The values that + This object is used to create and delete row in the + table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row - If the row exists, then a SET with value of create(4) + If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case - valid(2)....the row exists and is valid" + valid(2)....the row exists and is valid" ::= { snPimCandidateRPEntry 4 } @@ -5206,14 +5318,14 @@ snLoopbackIntfConfigEntry OBJECT-TYPE SnLoopbackIntfConfigEntry ::= SEQUENCE { snLoopbackIntfConfigPortIndex INTEGER, - snLoopbackIntfMode + snLoopbackIntfMode INTEGER, snLoopbackIntfRowStatus INTEGER } snLoopbackIntfConfigPortIndex OBJECT-TYPE - SYNTAX INTEGER (1..64) + SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION diff --git a/foundry/FOUNDRY-SN-IP-VRRP-MIB.mib b/foundry/FOUNDRY-SN-IP-VRRP-MIB.mib index 6ec641cfa..b7abb915d 100644 --- a/foundry/FOUNDRY-SN-IP-VRRP-MIB.mib +++ b/foundry/FOUNDRY-SN-IP-VRRP-MIB.mib @@ -10,45 +10,47 @@ IMPORTS ifIndex FROM IF-MIB; snVrrp MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + " + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" - ::= { router 12 } - + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" + ::= { router 12 } + MacAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" STATUS current DESCRIPTION " This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as - a string of 6 octets. + a string of 6 octets. " SYNTAX OCTET STRING (SIZE(6)) @@ -65,7 +67,7 @@ snVrrpVirRtr2 OBJECT IDENTIFIER ::= { snVrrp 5 } snVrrpGroupOperMode OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -74,7 +76,7 @@ snVrrpGroupOperMode OBJECT-TYPE "The VRRP is configured on this system either enabled or disabled and the default is disabled mode. - disabled(0)..........disable VRRP + disabled(0)..........disable VRRP enabled(1)...........activate VRRP" ::= { snVrrpGlobal 1 } @@ -113,19 +115,19 @@ snVrrpClearVrrpStat OBJECT-TYPE "Clear VRRP statistics command." ::= { snVrrpGlobal 5 } -snVrrpGroupOperModeVrrpextended OBJECT-TYPE +snVrrpGroupOperModeVrrpextended OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current - DESCRIPTION "The VRRP_extended is configured on this system either enabled + DESCRIPTION "The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. - disabled(0)..........disable VRRP extended - enabled(1)...........activate VRRP extended" + disabled(0)..........disable VRRP extended + enabled(1)...........activate VRRP extended" ::= { snVrrpGlobal 6 } - + -- Section 2: VRRP Interface Table --- The following table is deprecated by snVrrpIf2Table, which is +-- The following table is deprecated by snVrrpIf2Table, which is -- ifIndex based table snVrrpIfTable OBJECT-TYPE @@ -175,9 +177,9 @@ snVrrpIfTable OBJECT-TYPE ::= { snVrrpIfEntry 1 } snVrrpIfAuthType OBJECT-TYPE - SYNTAX INTEGER { - noAuth(0), - simpleTextPasswd(1), + SYNTAX INTEGER { + noAuth(0), + simpleTextPasswd(1), ipAuthHeader(2) } MAX-ACCESS read-write @@ -191,7 +193,7 @@ snVrrpIfTable OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "The simple text password is allowed if only if + "The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1)." ::= { snVrrpIfEntry 3 } @@ -227,7 +229,7 @@ snVrrpIfTable OBJECT-TYPE "The received unfound VRID error counts in this interface." ::= { snVrrpIfEntry 7 } --- Section 3: VRRP and VRRP-Extended Interface Table, +-- Section 3: VRRP and VRRP-Extended Interface Table, -- this is a modified vrrp/vrrpe interface table with ifIndex. -- NOTE: Protocols VRRPE and VRRP-Extended are one and the same. @@ -267,9 +269,9 @@ snVrrpIf2Table OBJECT-TYPE } snVrrpIf2AuthType OBJECT-TYPE - SYNTAX INTEGER { - noAuth(0), - simpleTextPasswd(1), + SYNTAX INTEGER { + noAuth(0), + simpleTextPasswd(1), ipAuthHeader(2) } MAX-ACCESS read-write @@ -283,7 +285,7 @@ snVrrpIf2Table OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The simple text password is allowed if only if + "The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1)." ::= { snVrrpIf2Entry 2 } @@ -321,10 +323,10 @@ snVrrpIf2Table OBJECT-TYPE -- Section 4: VRRP virtual Router Configuration Table. --- The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments +-- The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments -- with VRRP specific information. --- The following table is deprecated by snVrrpVirRtr2Table, which is --- ifIndex based table +-- The following table is deprecated by snVrrpVirRtr2Table, which is +-- ifIndex based table snVrrpVirRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVrrpVirRtrEntry @@ -359,15 +361,15 @@ snVrrpVirRtrTable OBJECT-TYPE INTEGER, snVrrpVirRtrCurrPriority INTEGER, - snVrrpVirRtrHelloInt + snVrrpVirRtrHelloInt INTEGER, - snVrrpVirRtrDeadInt + snVrrpVirRtrDeadInt INTEGER, - snVrrpVirRtrPreemptMode + snVrrpVirRtrPreemptMode INTEGER, snVrrpVirRtrState INTEGER, - snVrrpVirRtrActivate + snVrrpVirRtrActivate INTEGER, snVrrpVirRtrIpAddrMask OCTET STRING, @@ -375,29 +377,29 @@ snVrrpVirRtrTable OBJECT-TYPE OCTET STRING, snVrrpVirRtrTrackVifMask OCTET STRING, - snVrrpVirRtrRowStatus + snVrrpVirRtrRowStatus INTEGER, - snVrrpVirRtrRxArpPktDropCnts + snVrrpVirRtrRxArpPktDropCnts Counter32, - snVrrpVirRtrRxIpPktDropCnts + snVrrpVirRtrRxIpPktDropCnts Counter32, - snVrrpVirRtrRxPortMismatchCnts + snVrrpVirRtrRxPortMismatchCnts Counter32, - snVrrpVirRtrRxNumOfIpMismatchCnts + snVrrpVirRtrRxNumOfIpMismatchCnts Counter32, - snVrrpVirRtrRxIpMismatchCnts + snVrrpVirRtrRxIpMismatchCnts Counter32, - snVrrpVirRtrRxHelloIntMismatchCnts + snVrrpVirRtrRxHelloIntMismatchCnts Counter32, - snVrrpVirRtrRxPriorityZeroFromMasterCnts + snVrrpVirRtrRxPriorityZeroFromMasterCnts Counter32, - snVrrpVirRtrRxHigherPriorityCnts + snVrrpVirRtrRxHigherPriorityCnts Counter32, - snVrrpVirRtrTransToMasterStateCnts + snVrrpVirRtrTransToMasterStateCnts Counter32, - snVrrpVirRtrTransToBackupStateCnts + snVrrpVirRtrTransToBackupStateCnts Counter32, - snVrrpVirRtrCurrDeadInt + snVrrpVirRtrCurrDeadInt Integer32, snVrrpVirRtrTrackPortList OCTET STRING, @@ -431,9 +433,9 @@ snVrrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "The ownership of this VRRP router interface - can be set either owner(1) or backup(2). - VirRtr SNMP-GET returns incomplete(0), it means + "The ownership of this VRRP router interface + can be set either owner(1) or backup(2). + VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface." ::= { snVrrpVirRtrEntry 3 } @@ -457,7 +459,7 @@ snVrrpVirRtrTable OBJECT-TYPE STATUS deprecated DESCRIPTION "The higher the number the higher the priority is. - after this object is configured, the snVrrpVirRtrCurrPriority + after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN." @@ -549,7 +551,7 @@ snVrrpVirRtrTable OBJECT-TYPE the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -565,12 +567,12 @@ snVrrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "This object specifies the identity of the virtual interface + "This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -692,7 +694,7 @@ snVrrpVirRtrTable OBJECT-TYPE ::= { snVrrpVirRtrEntry 25 } snVrrpVirRtrCurrDeadInt OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION @@ -711,7 +713,7 @@ snVrrpVirRtrTable OBJECT-TYPE is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -724,13 +726,13 @@ snVrrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "This object specifies the identity of the virtual interface + "This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -741,7 +743,7 @@ snVrrpVirRtrTable OBJECT-TYPE -- Section 5: VRRP and VRRPE Virtual Router Configuration Table, ifIndex based --- The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an +-- The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an -- enhancement!) and VRRPE (Virtual Router Redundancy Protocol foundry extended) -- configuration. -- Added snVrrpVirRtr2CurrDeadInt, snVrrpVirRtr2AdvertiseBackup, SnVrrpVirRtr2VirtualMacAddr @@ -779,47 +781,47 @@ snVrrpVirRtr2Table OBJECT-TYPE INTEGER, snVrrpVirRtr2CurrPriority INTEGER, - snVrrpVirRtr2HelloInt + snVrrpVirRtr2HelloInt INTEGER, - snVrrpVirRtr2DeadInt + snVrrpVirRtr2DeadInt INTEGER, - snVrrpVirRtr2PreemptMode + snVrrpVirRtr2PreemptMode INTEGER, snVrrpVirRtr2State INTEGER, snVrrpVirRtr2IpAddrMask OCTET STRING, - snVrrpVirRtr2Activate + snVrrpVirRtr2Activate INTEGER, snVrrpVirRtr2BackupInt INTEGER, - snVrrpVirRtr2RowStatus + snVrrpVirRtr2RowStatus INTEGER, - snVrrpVirRtr2RxArpPktDropCnts + snVrrpVirRtr2RxArpPktDropCnts Counter32, - snVrrpVirRtr2RxIpPktDropCnts + snVrrpVirRtr2RxIpPktDropCnts Counter32, - snVrrpVirRtr2RxPortMismatchCnts + snVrrpVirRtr2RxPortMismatchCnts Counter32, - snVrrpVirRtr2RxNumOfIpMismatchCnts + snVrrpVirRtr2RxNumOfIpMismatchCnts Counter32, - snVrrpVirRtr2RxIpMismatchCnts + snVrrpVirRtr2RxIpMismatchCnts Counter32, - snVrrpVirRtr2RxHelloIntMismatchCnts + snVrrpVirRtr2RxHelloIntMismatchCnts Counter32, - snVrrpVirRtr2RxPriorityZeroFromMasterCnts + snVrrpVirRtr2RxPriorityZeroFromMasterCnts Counter32, - snVrrpVirRtr2RxHigherPriorityCnts + snVrrpVirRtr2RxHigherPriorityCnts Counter32, - snVrrpVirRtr2TransToMasterStateCnts + snVrrpVirRtr2TransToMasterStateCnts Counter32, - snVrrpVirRtr2TransToBackupStateCnts + snVrrpVirRtr2TransToBackupStateCnts Counter32, - snVrrpVirRtr2CurrDeadInt + snVrrpVirRtr2CurrDeadInt Integer32, snVrrpVirRtr2TrackPortList OCTET STRING, - snVrrpVirRtr2AdvertiseBackup + snVrrpVirRtr2AdvertiseBackup INTEGER, snVrrpVirRtr2MasterIpAddr IpAddress, @@ -828,7 +830,7 @@ snVrrpVirRtr2Table OBJECT-TYPE snVrrpVirRtr2VirtualMacAddr MacAddress } - + snVrrpVirRtr2Id OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only @@ -846,9 +848,9 @@ snVrrpVirRtr2Table OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The ownership of this Vrrp router interface - can be set either owner(1) or backup(2). - VirRtr SNMP-GET returns incomplete(0), it means + "The ownership of this Vrrp router interface + can be set either owner(1) or backup(2). + VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0)." ::= { snVrrpVirRtr2Entry 2 } @@ -867,7 +869,7 @@ snVrrpVirRtr2Table OBJECT-TYPE to participate in VRRP and a backup virtual router should transition to become a new master. - A priority of 255 is only for VRRP - owner. Not valid for number to + A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE." DEFVAL { 100 } ::= { snVrrpVirRtr2Entry 3 } @@ -878,7 +880,7 @@ snVrrpVirRtr2Table OBJECT-TYPE STATUS current DESCRIPTION "The higher the number the higher the priority is. - After this object is configured, the snVrrpVirRtr2CurrPriority + after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN." @@ -1080,7 +1082,7 @@ snVrrpVirRtr2Table OBJECT-TYPE ::= { snVrrpVirRtr2Entry 23 } snVrrpVirRtr2CurrDeadInt OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -1093,12 +1095,12 @@ snVrrpVirRtr2Table OBJECT-TYPE STATUS current DESCRIPTION "This object specifies the identity of the physical port and virtual ports - whose state is to be monitored. Each port index is + whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then - they will be encoded like below. + they will be encoded like below. Encoding and decoding scheme is range based: - Each range prefix with 0000 (2 octets) where 0000 is not valid - ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 + Each range prefix with 0000 (2 octets) where 0000 is not valid + ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 @@ -1106,7 +1108,7 @@ snVrrpVirRtr2Table OBJECT-TYPE If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -1155,4 +1157,4 @@ snVrrpVirRtr2Table OBJECT-TYPE application and can be included in VRRP-related SNMP traps." ::= { snVrrpVirRtr2Entry 29 } -END +END diff --git a/foundry/FOUNDRY-SN-MRP-MIB.mib b/foundry/FOUNDRY-SN-MRP-MIB.mib index 8eb201b46..c5517767e 100644 --- a/foundry/FOUNDRY-SN-MRP-MIB.mib +++ b/foundry/FOUNDRY-SN-MRP-MIB.mib @@ -9,38 +9,19 @@ IMPORTS FROM SNMPv2-TC; snMetroRing MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." + LAST-UPDATED "201708070000Z" -- Aug7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Management Information Base module for metro ring - configuration and statistics. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 + "" DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200705160000Z" -- May 16, 2007 + "Management Information Base module for metro ring + configuration and statistics." + REVISION "201708070000Z" -- Aug 7, 2017 DESCRIPTION "" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified Organization" ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) products(1) switch(1) snSwitch(3) 29 } snMetroRingGlobalObjects OBJECT IDENTIFIER ::= { snMetroRing 1 } @@ -344,4 +325,4 @@ snMetroRingSecPortActivePort OBJECT-TYPE "The ifIndex value of active secondary port." ::= { snMetroRingEntry 24 } -END +END diff --git a/foundry/FOUNDRY-SN-NOTIFICATION-MIB b/foundry/FOUNDRY-SN-NOTIFICATION-MIB index 55025fa3a..6cfc4352e 100644 --- a/foundry/FOUNDRY-SN-NOTIFICATION-MIB +++ b/foundry/FOUNDRY-SN-NOTIFICATION-MIB @@ -2,7 +2,7 @@ FOUNDRY-SN-NOTIFICATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI - foundry FROM FOUNDRY-SN-ROOT-MIB + foundry FROM FOUNDRY-SN-ROOT-MIB ifIndex FROM IF-MIB dot3OamLoopbackStatus FROM DOT3-OAM-MIB snVLanByPortCfgVLanId FROM FOUNDRY-SN-SWITCH-GROUP-MIB @@ -14,7 +14,7 @@ IMPORTS snChasPwrSupplyDescription, snChasUnitIndex, snChasFanIndex, - snChasFanDescription, + snChasFanDescription FROM FOUNDRY-SN-AGENT-MIB fdryLicenseType FROM FOUNDRY-SN-AGENT-MIB snSwViolatorPortNumber, snSwViolatorMacAddress FROM FOUNDRY-SN-SWITCH-GROUP-MIB @@ -22,7 +22,7 @@ IMPORTS snL4LinkVirtualInterface, snL4MaxSessionLimit, snL4TcpSynLimit, - snL4TrapRealServerIP, + snL4TrapRealServerIP, snL4TrapRealServerName, snL4TrapRealServerPort, snL4TrapRealServerCurConnections FROM FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB @@ -37,8 +37,8 @@ IMPORTS snOspfNbrRtrId, snOspfNbrState, snOspfVirtNbrArea, - snOspfVirtNbrRtrId, - snOspfVirtNbrState, + snOspfVirtNbrRtrId, + snOspfVirtNbrState, snOspfPacketSrc, snOspfConfigErrorType, snOspfPacketType, @@ -47,56 +47,47 @@ IMPORTS snOspfLsdbLsId, snOspfLsdbRouterId, snOspfExtLsdbLimit FROM FOUNDRY-SN-OSPF-GROUP-MIB - dot1agCfmMdName, - dot1agCfmMaNetName, - dot1agCfmMepDbRMepState FROM IEEE8021-CFM-MIB - brcdNPIndex, brcdNPLockupRecoveryCount - FROM BROCADE-NP-TM-STATS-MIB snStackingGlobalMixedMode FROM FOUNDRY-SN-STACKING-MIB ; - + snTraps MODULE-IDENTITY - LAST-UPDATED "201205180000Z" -- 18 May 2012 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "This MIB module describes proprietery SNMP Trap information - of Brocade Communications' router/switch product. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201205180000Z" -- 18 May 2012 - DESCRIPTION - "Added snTrapModuleNPLockupIndication and - snTrapModuleNPLockupThresholdExceeded traps." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION - "convert from SMIv1 to SMIv2" - ::= { foundry 0 } + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + The MIB module describes proprietery SNMP Trap information + of Ruckus Wireless, Inc' router/switch product. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION + "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + ::= { foundry 0 } -- Trap Information --- Brocade Communications Systems, Inc. Specific Traps +-- Ruckus Wireless, Inc.. Specific Traps snTrapChasPwrSupply NOTIFICATION-TYPE OBJECTS { snChasPwrSupplyStatus } @@ -105,7 +96,7 @@ snTrapChasPwrSupply NOTIFICATION-TYPE "The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4 bits - (a nibble). + (a nibble). The following shows the meaning of each bit: (bit 0 is the least significant bit). @@ -116,7 +107,7 @@ snTrapChasPwrSupply NOTIFICATION-TYPE 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present)." - --#TYPE "Brocade Trap: Power Supply Failure" + --#TYPE "Ruckus Wireless Trap: Power Supply Failure" --#SUMMARY "Power supply fails, error status %d." --#ARGUMENTS { 0 } --#SEVERITY MINOR @@ -130,7 +121,7 @@ snTrapLockedAddressViolation NOTIFICATION-TYPE "The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port." - --#TYPE "Brocade Trap: MAC Addresses Violation" + --#TYPE "Ruckus Wireless Trap: MAC Addresses Violation" --#SUMMARY "Lock address violation on Port %d with MAC Address %s." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -152,7 +143,7 @@ snTrapOspfIfStateChange NOTIFICATION-TYPE from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)." - --#TYPE "Brocade Trap: OSPF Interface State Change" + --#TYPE "Ruckus Wireless Trap: OSPF Interface State Change" --#SUMMARY "OSPF router id %s, interface %s state changed to %d." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL @@ -175,7 +166,7 @@ snTrapOspfVirtIfStateChange NOTIFICATION-TYPE face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point)." - --#TYPE "Brocade Trap: OSPF Virtual Interface State Change" + --#TYPE "Ruckus Wireless Trap: OSPF Virtual Interface State Change" --#SUMMARY "OSPF router id %s, virtual interface area id %s neighbor %s state changed to %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL @@ -204,7 +195,7 @@ snOspfNbrStateChange NOTIFICATION-TYPE erated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange." - --#TYPE "Brocade Trap: OSPF Neighbour State Change" + --#TYPE "Ruckus Wireless Trap: OSPF Neighbour State Change" --#SUMMARY "OSPF router id %s neighbor area %s, neighbor router id %s state changed to %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL @@ -227,7 +218,7 @@ snOspfVirtNbrStateChange NOTIFICATION-TYPE when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full)." - --#TYPE "Brocade Trap: OSPF Virtual Neighbour State Change" + --#TYPE "Ruckus Wireless Trap: OSPF Virtual Neighbour State Change" --#SUMMARY "OSPF router id %s virtual neighbor area %s, virtual neighbor router id %s state changed to %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL @@ -253,7 +244,7 @@ snOspfIfConfigError NOTIFICATION-TYPE guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming." - --#TYPE "Brocade Trap: OSPF Interface Configuration Error" + --#TYPE "Ruckus Wireless Trap: OSPF Interface Configuration Error" --#SUMMARY "configuration error type %d with packet type %d has been received on interface %s, router id %s from %s." --#ARGUMENTS { 3, 4, 1, 0, 2 } --#SEVERITY MAJOR @@ -278,7 +269,7 @@ snOspfVirtIfConfigError NOTIFICATION-TYPE parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming." - --#TYPE "Brocade Trap: OSPF Virtual Interface Configuration Error" + --#TYPE "Ruckus Wireless Trap: OSPF Virtual Interface Configuration Error" --#SUMMARY "configuration error type %d with packet type %d has been received on virtual interface area id %s, router id %s from neighbor %s." --#ARGUMENTS { 3, 4, 1, 0, 2 } --#SEVERITY MAJOR @@ -303,7 +294,7 @@ snOspfIfAuthFailure NOTIFICATION-TYPE or authentication type conflicts with this router's authentication key or authentication type." - --#TYPE "Brocade Trap: OSPF Interface Authentication Failure" + --#TYPE "Ruckus Wireless Trap: OSPF Interface Authentication Failure" --#SUMMARY "OSPF authentication failed. Router ID %s,Interface %s, packet src %s, error type %d and packet type %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR @@ -327,7 +318,7 @@ snOspfVirtIfAuthFailure NOTIFICATION-TYPE from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type." - --#TYPE "Brocade Trap: OSPF Virtual Interface Authentication Failure" + --#TYPE "Ruckus Wireless Trap: OSPF Virtual Interface Authentication Failure" --#SUMMARY "OSPF authentication failed. Router ID %s,virtual interface %s, Neigbor %s, Error type %d and packet type %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR @@ -347,7 +338,7 @@ snOspfIfRxBadPacket NOTIFICATION-TYPE "An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed." - --#TYPE "Brocade Trap: OSPF Interface Receive Bad Packet" + --#TYPE "Ruckus Wireless Trap: OSPF Interface Receive Bad Packet" --#SUMMARY "OSPF Router Id %s, interface %s receive bad packet (type %d) from %s." --#ARGUMENTS { 0, 1, 3, 2 } --#SEVERITY WARNING @@ -367,7 +358,7 @@ snOspfVirtIfRxBadPacket NOTIFICATION-TYPE "An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed." - --#TYPE "Brocade Trap: OSPF Virt Interface Receive Bad Packet" + --#TYPE "Ruckus Wireless Trap: OSPF Virt Interface Receive Bad Packet" --#SUMMARY "OSPF router id %s, virtual interface %s received bad packet (type %d) from neighbor %s." --#ARGUMENTS { 0, 1, 3, 2 } --#SEVERITY WARNING @@ -393,7 +384,7 @@ snOspfTxRetransmit NOTIFICATION-TYPE transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry." - --#TYPE "Brocade Trap: OSPF Retransmit" + --#TYPE "Ruckus Wireless Trap: OSPF Retransmit" --#SUMMARY "OSPF router id %s, interface %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor router id %s." --#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 } --#SEVERITY WARNING @@ -420,7 +411,7 @@ ospfVirtIfTxRetransmit NOTIFICATION-TYPE ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry." - --#TYPE "Brocade Trap: OSPF Virt Interface Retransmit" + --#TYPE "Ruckus Wireless Trap: OSPF Virt Interface Retransmit" --#SUMMARY "OSPF router id %s, virtual interface area id %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor %s." --#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 } --#SEVERITY WARNING @@ -447,7 +438,7 @@ snOspfOriginateLsa NOTIFICATION-TYPE tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge." - --#TYPE "Brocade Trap: OSPF Originate LSA" + --#TYPE "Ruckus Wireless Trap: OSPF Originate LSA" --#SUMMARY "New LSA (area id %s, type %d, LS Id %s and router id %s) has been originated by router id %s." --#ARGUMENTS { 1, 2, 3, 4, 0 } --#SEVERITY INFORMATIONAL @@ -468,7 +459,7 @@ snOspfMaxAgeLsa NOTIFICATION-TYPE "An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge." - --#TYPE "Brocade Trap: OSPF MaxAge LSA" + --#TYPE "Ruckus Wireless Trap: OSPF MaxAge LSA" --#SUMMARY "The LSA (area id %s, type %d, LS Id %s and router id %s) in router id %s link-state database has aged to maximum age." --#ARGUMENTS { 1, 2, 3, 4, 0 } --#SEVERITY WARNING @@ -487,7 +478,7 @@ snOspfLsdbOverflow NOTIFICATION-TYPE "An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded ospfExtLsdbLimit." - --#TYPE "Brocade Trap: OSPF LS DB Overflow" + --#TYPE "Ruckus Wireless Trap: OSPF LS DB Overflow" --#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded %d." --#ARGUMENTS { 0, 1 } --#SEVERITY WARNING @@ -506,7 +497,7 @@ snOspfLsdbApproachingOverflow NOTIFICATION-TYPE that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit." - --#TYPE "Brocade Trap: OSPF LS DB Near Full" + --#TYPE "Ruckus Wireless Trap: OSPF LS DB Near Full" --#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded ninety percent of %d." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL @@ -520,7 +511,7 @@ snTrapL4MaxSessionLimitReached NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the maximum number of connections reached." - --#TYPE "Brocade Trap: L4 Session Limit" + --#TYPE "Ruckus Wireless Trap: L4 Session Limit" --#SUMMARY "SLB maximum number of connections %d has been reached." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -534,7 +525,7 @@ snTrapL4TcpSynLimitReached NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the number of TCP SYN limits reached." - --#TYPE "Brocade Trap: L4 TCP Syn Limit" + --#TYPE "Ruckus Wireless Trap: L4 TCP Syn Limit" --#SUMMARY "SLB TCP Syn limits %d has been reached." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -548,7 +539,7 @@ snTrapL4RealServerUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the load balancing real server is up." - --#TYPE "Brocade Trap: L4 Real Server Up" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Up" --#SUMMARY "SLB real server %s %s is up." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL @@ -562,7 +553,7 @@ snTrapL4RealServerDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the load balancing real server is down." - --#TYPE "Brocade Trap: L4 Real Server Down" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Down" --#SUMMARY "SLB real server %s %s is down." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL @@ -576,7 +567,7 @@ snTrapL4RealServerPortUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the load balancing real server TCP port is up." - --#TYPE "Brocade Trap: L4 Real Server Port Up" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Port Up" --#SUMMARY "SLB real server port %s %s %d is up." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL @@ -590,7 +581,7 @@ snTrapL4RealServerPortDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the load balancing real server TCP port is down." - --#TYPE "Brocade Trap: L4 Real Server Port Down" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Port Down" --#SUMMARY "SLB real server port %s %s %d is down." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL @@ -604,7 +595,7 @@ snTrapL4RealServerMaxConnectionLimitReached NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the real server reaches maximum number of connections." - --#TYPE "Brocade Trap: L4 Real Server Max Connection Limit" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Max Connection Limit" --#SUMMARY "SLB real server %s %s maximum connection %d has been reached." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY WARNING @@ -617,7 +608,7 @@ snTrapL4BecomeStandby NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch changes state from active to standby." - --#TYPE "Brocade Trap: L4 Server On Standby" + --#TYPE "Ruckus Wireless Trap: L4 Server On Standby" --#SUMMARY "SLB changes state from active to standby." --#ARGUMENTS { } --#SEVERITY WARNING @@ -630,7 +621,7 @@ snTrapL4BecomeActive NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch changes state from standby to active." - --#TYPE "Brocade Trap: L4 Server Active" + --#TYPE "Ruckus Wireless Trap: L4 Server Active" --#SUMMARY "SLB changes state from standby to active." --#ARGUMENTS { } --#SEVERITY WARNING @@ -644,7 +635,7 @@ snTrapModuleInserted NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a module was inserted to the chassis during system running." - --#TYPE "Brocade Trap: Module Inserted" + --#TYPE "Ruckus Wireless Trap: Module Inserted" --#SUMMARY "Module %d was inserted to the chassis during system running." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -658,7 +649,7 @@ snTrapModuleRemoved NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a module was removed from the chassis during system running." - --#TYPE "Brocade Trap: Module Removed" + --#TYPE "Ruckus Wireless Trap: Module Removed" --#SUMMARY "Module %d was removed from the chassis during system running." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -672,7 +663,7 @@ snTrapChasPwrSupplyFailed NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a power supply operational status changed from normal to failure." - --#TYPE "Brocade Trap: Power Supply Failure" + --#TYPE "Ruckus Wireless Trap: Power Supply Failure" --#SUMMARY "Power supply %d (%s) failed." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -686,7 +677,7 @@ snTrapChasFanFailed NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a fan fails to operate normally." - --#TYPE "Brocade Trap: Fan Failure" + --#TYPE "Ruckus Wireless Trap: Fan Failure" --#SUMMARY "Fan %d (%s) failed." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -701,7 +692,7 @@ snTrapLockedAddressViolation2 NOTIFICATION-TYPE "The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port." - --#TYPE "Brocade Trap: Lock Address Violation" + --#TYPE "Ruckus Wireless Trap: Lock Address Violation" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY MINOR @@ -715,7 +706,7 @@ snTrapFsrpIfStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a FSRP routing device changed state from active to standby or vice-versa." - --#TYPE "Brocade Trap: FSRP Interface Change" + --#TYPE "Ruckus Wireless Trap: FSRP Interface Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -728,7 +719,7 @@ snTrapVrrpIfStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a VRRP routing device switched between states master, backup, intialized or uknown." - --#TYPE "Brocade Trap: VRRP Interface Change" + --#TYPE "Ruckus Wireless Trap: VRRP Interface Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -742,7 +733,7 @@ snTrapMgmtModuleRedunStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the management module changes redundancy state." - --#TYPE "Brocade Trap: Management Module Change State" + --#TYPE "Ruckus Wireless Trap: Management Module Change State" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -756,7 +747,7 @@ snTrapTemperatureWarning NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold." - --#TYPE "Brocade Trap: Temperature Warning" + --#TYPE "Ruckus Wireless Trap: Temperature Warning" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY CRITICAL @@ -769,7 +760,7 @@ snTrapAccessListDeny NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a packet was denied by an access list." - --#TYPE "Brocade Trap: Deny from ACL" + --#TYPE "Ruckus Wireless Trap: Deny from ACL" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -782,7 +773,7 @@ snTrapMacFilterDeny NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a packet was denied by a MAC address filter." - --#TYPE "Brocade Trap: Deny from MAC Filter" + --#TYPE "Ruckus Wireless Trap: Deny from MAC Filter" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -794,7 +785,7 @@ snTrapL4GslbRemoteUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the connection to the remote SI is established." - --#TYPE "Brocade Trap: Remote SI Up" + --#TYPE "Ruckus Wireless Trap: Remote SI Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -806,7 +797,7 @@ snTrapL4GslbRemoteDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the connection to the remote SI is down." - --#TYPE "Brocade Trap: Remote SI Down" + --#TYPE "Ruckus Wireless Trap: Remote SI Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -818,7 +809,7 @@ snTrapL4GslbRemoteControllerUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the connection to the GSLB SI is established." - --#TYPE "Brocade Trap: Remote GSLB SI Up" + --#TYPE "Ruckus Wireless Trap: Remote GSLB SI Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -830,7 +821,7 @@ snTrapL4GslbRemoteControllerDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the connection to the GSLB SI is down." - --#TYPE "Brocade Trap: Remote GSLB SI Down" + --#TYPE "Ruckus Wireless Trap: Remote GSLB SI Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -843,7 +834,7 @@ snTrapL4GslbHealthCheckIpUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when GSLB health check for an address transitions from down to active state." - --#TYPE "Brocade Trap: GSLB HealtCheck Up" + --#TYPE "Ruckus Wireless Trap: GSLB HealtCheck Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -856,7 +847,7 @@ snTrapL4GslbHealthCheckIpDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when GSLB health check for an address transitions from active to down state." - --#TYPE "Brocade Trap: GSLB HealthCheck Down" + --#TYPE "Ruckus Wireless Trap: GSLB HealthCheck Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -868,7 +859,7 @@ snTrapL4GslbHealthCheckIpPortUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a given port for a health check address is up." - --#TYPE "Brocade Trap: GSLB HealthCheck Port Up" + --#TYPE "Ruckus Wireless Trap: GSLB HealthCheck Port Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -880,7 +871,7 @@ snTrapL4GslbHealthCheckIpPortDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a given port for a health check address is down." - --#TYPE "Brocade Trap: GSLB HealthCheck Port Down" + --#TYPE "Ruckus Wireless Trap: GSLB HealthCheck Port Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -892,7 +883,7 @@ snTrapL4FirewallBecomeStandby NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch Firewall changes state from active to standby." - --#TYPE "Brocade Trap: Firewall Standby" + --#TYPE "Ruckus Wireless Trap: Firewall Standby" --#SUMMARY "Firewall changes state from active to standby." --#ARGUMENTS { } --#SEVERITY MAJOR @@ -904,7 +895,7 @@ snTrapL4FirewallBecomeActive NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch Firewall changes state from standby to active." - --#TYPE "Brocade Trap: Firewall Active" + --#TYPE "Ruckus Wireless Trap: Firewall Active" --#SUMMARY "Firewall changes state from standby to active." --#ARGUMENTS { } --#SEVERITY MAJOR @@ -916,7 +907,7 @@ snTrapL4FirewallPathUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch Firewall path is up." - --#TYPE "Brocade Trap: Firewall Path Up" + --#TYPE "Ruckus Wireless Trap: Firewall Path Up" --#SUMMARY "Firewall path is up." --#ARGUMENTS { } --#SEVERITY MINOR @@ -929,7 +920,7 @@ snTrapL4FirewallPathDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the server load balancing switch Firewall path is down." - --#TYPE "Brocade Trap: Firewall Path Down" + --#TYPE "Ruckus Wireless Trap: Firewall Path Down" --#SUMMARY "Firewall path is down." --#ARGUMENTS { } --#SEVERITY MINOR @@ -941,7 +932,7 @@ snTrapIcmpLocalExceedBurst NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when incoming ICMP exceeds burst-MAX." - --#TYPE "Brocade Trap: ICMP Burst Exceeded" + --#TYPE "Ruckus Wireless Trap: ICMP Burst Exceeded" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -953,7 +944,7 @@ snTrapIcmpTransitExceedBurst NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when transit ICMP exceeds burst-MAX." - --#TYPE "Brocade Trap: Transit ICMP Burst Exceeded" + --#TYPE "Ruckus Wireless Trap: Transit ICMP Burst Exceeded" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -965,7 +956,7 @@ snTrapTcpLocalExceedBurst NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX." - --#TYPE "Brocade Trap: TCP SYN Burst Exceeded" + --#TYPE "Ruckus Wireless Trap: TCP SYN Burst Exceeded" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -977,7 +968,7 @@ snTrapTcpTransitExceedBurst NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when transit TCP exceeds burst-MAX." - --#TYPE "Brocade Trap: Transit TCP SYN Burst Exceeded" + --#TYPE "Ruckus Wireless Trap: Transit TCP SYN Burst Exceeded" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -989,7 +980,7 @@ snTrapL4ContentVerification NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the HTTP match-list pattern is found." - --#TYPE "Brocade Trap: HTTP Match" + --#TYPE "Ruckus Wireless Trap: HTTP Match" --#SUMMARY "HTTP match-list pattern is found." --#ARGUMENTS { } --#SEVERITY INFORMATIONAL @@ -997,13 +988,12 @@ snTrapL4ContentVerification NOTIFICATION-TYPE ::= { snTraps 55 } snTrapDuplicateIp NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "Duplicate IP address detected." - --#TYPE "Brocade Trap: Duplicate IP" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } + --#TYPE "Ruckus Wireless Trap: Duplicate IP" + --#SUMMARY "Duplicate IP address detect." + --#ARGUMENTS { } --#SEVERITY MAJOR --#STATE OPERATIONAL ::= { snTraps 56 } @@ -1012,7 +1002,7 @@ snTrapMplsProblem NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "NOT IMPLEMENTED: MPLS Problem Detected." - --#TYPE "Brocade Trap: MPLS Problem" + --#TYPE "Ruckus Wireless Trap: MPLS Problem" --#SUMMARY "MPLS Problem detect." --#ARGUMENTS { } --#SEVERITY MAJOR @@ -1023,29 +1013,29 @@ snTrapMplsException NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "NOT IMPLEMENTED: MPLS Exception Detected." - --#TYPE "Brocade Trap: MPLS Exception" + --#TYPE "Ruckus Wireless Trap: MPLS Exception" --#SUMMARY "MPLS Exception detect." --#ARGUMENTS { } --#SEVERITY MAJOR --#STATE OPERATIONAL ::= { snTraps 58 } - + snTrapMplsAudit NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "NOT IMPLEMENTED: MPLS Audit Trap." - --#TYPE "Brocade Trap: MPLS Audit" + --#TYPE "Ruckus Wireless Trap: MPLS Audit" --#SUMMARY "MPLS Audit Trap." --#ARGUMENTS { } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { snTraps 59 } - + snTrapMplsDeveloper NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "NOT IMPLEMENTED: MPLS Developer Trap." - --#TYPE "Brocade Trap: MPLS Developer" + --#TYPE "Ruckus Wireless Trap: MPLS Developer" --#SUMMARY "MPLS Developer Trap." --#ARGUMENTS { } --#SEVERITY INFORMATIONAL @@ -1057,7 +1047,7 @@ snTrapNoBmFreeQueue NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when no free queue is available in buffer manager." - --#TYPE "Brocade Trap: No BM Free Queue" + --#TYPE "Ruckus Wireless Trap: No BM Free Queue" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1069,7 +1059,7 @@ snTrapSmcDmaDrop NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when SMC DMA packet is dropped." - --#TYPE "Brocade Trap: SMC DMA Packet Dropped" + --#TYPE "Ruckus Wireless Trap: SMC DMA Packet Dropped" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1081,7 +1071,7 @@ snTrapSmcBpDrop NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when SMC BackPlane packet is dropped." - --#TYPE "Brocade Trap: SMC BP Packet Dropped" + --#TYPE "Ruckus Wireless Trap: SMC BP Packet Dropped" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1093,7 +1083,7 @@ snTrapBmWriteSeqDrop NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when BM write sequence packet is dropped." - --#TYPE "Brocade Trap: BM Write Sequence Packet Dropped" + --#TYPE "Ruckus Wireless Trap: BM Write Sequence Packet Dropped" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1105,7 +1095,7 @@ snTrapBgpPeerUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the bgp peer is up." - --#TYPE "Brocade Trap: BGP Peer Up" + --#TYPE "Ruckus Wireless Trap: BGP Peer Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1117,7 +1107,7 @@ snTrapBgpPeerDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the bgp peer is down." - --#TYPE "Brocade Trap: BGP Peer Down" + --#TYPE "Ruckus Wireless Trap: BGP Peer Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1129,7 +1119,7 @@ snTrapL4RealServerResponseTimeLowerLimit NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the real server average response time exceeds lower threshold." - --#TYPE "Brocade Trap: L4 Real Server Response Exceeds Lower Threshold" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Response Exceeds Lower Threshold" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1141,7 +1131,7 @@ snTrapL4RealServerResponseTimeUpperLimit NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the real server average response time exceeds upper threshold." - --#TYPE "Brocade Trap: L4 Real Server Response Exceeds Upper Threshold" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Response Exceeds Upper Threshold" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1153,7 +1143,7 @@ snTrapL4TcpAttackRateExceedMax NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the TCP attack rate exceeds configured maximum." - --#TYPE "Brocade Trap: L4 TCP Attack Rate Exceed Max" + --#TYPE "Ruckus Wireless Trap: L4 TCP Attack Rate Exceed Max" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY CRITICAL @@ -1165,7 +1155,7 @@ snTrapL4TcpAttackRateExceedThreshold NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum." - --#TYPE "Brocade Trap: L4 TCP Attack Rate Exceed Threshold" + --#TYPE "Ruckus Wireless Trap: L4 TCP Attack Rate Exceed Threshold" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1177,7 +1167,7 @@ snTrapL4ConnectionRateExceedMax NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the L4 connection rate exceeds configured maximum." - --#TYPE "Brocade Trap: L4 Connection Rate Exceed Max" + --#TYPE "Ruckus Wireless Trap: L4 Connection Rate Exceed Max" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY CRITICAL @@ -1189,7 +1179,7 @@ snTrapL4ConnectionRateExceedThreshold NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum" - --#TYPE "Brocade Trap: L4 Connection Rate Exceed Threshold" + --#TYPE "Ruckus Wireless Trap: L4 Connection Rate Exceed Threshold" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1202,7 +1192,7 @@ snTrapRunningConfigChanged NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the running configuration was changed." - --#TYPE "Brocade Trap: Running Configuration Changed" + --#TYPE "Ruckus Wireless Trap: Running Configuration Changed" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1215,7 +1205,7 @@ snTrapStartupConfigChanged NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the startup configuration was changed." - --#TYPE "Brocade Trap: Startup Configuration Changed" + --#TYPE "Ruckus Wireless Trap: Startup Configuration Changed" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1227,7 +1217,7 @@ snTrapUserLogin NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when user login." - --#TYPE "Brocade Trap: User Login" + --#TYPE "Ruckus Wireless Trap: User Login" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1239,7 +1229,7 @@ snTrapUserLogout NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when user logout." - --#TYPE "Brocade Trap: User Logout" + --#TYPE "Ruckus Wireless Trap: User Logout" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1252,7 +1242,7 @@ snTrapPortSecurityViolation NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when insecure MAC addresses are received from a port with MAC security feature enabled." - --#TYPE "Brocade Trap: Port Security Violation" + --#TYPE "Ruckus Wireless Trap: Port Security Violation" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY MINOR @@ -1265,7 +1255,7 @@ snTrapPortSecurityShutdown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when insecure MAC addresses are received from a port caused the port to shutdown." - --#TYPE "Brocade Trap: Port Security Violation Cause Shutdown" + --#TYPE "Ruckus Wireless Trap: Port Security Violation Cause Shutdown" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY MINOR @@ -1278,7 +1268,7 @@ snTrapMrpStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a MRP switching and routing device changed state to disabled, blocking, preforwarding, forwarding, uknown." - --#TYPE "Brocade Trap: MRP Interface Change" + --#TYPE "Ruckus Wireless Trap: MRP Interface Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1290,7 +1280,7 @@ snTrapMrpCamError NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a MRP Cam Error occurs." - --#TYPE "Brocade Trap: MRP Cam Error" + --#TYPE "Ruckus Wireless Trap: MRP Cam Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1303,7 +1293,7 @@ snTrapChasPwrSupplyOK NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a power supply operational status changed from failure to normal." - --#TYPE "Brocade Trap: Power Supply OK" + --#TYPE "Ruckus Wireless Trap: Power Supply OK" --#SUMMARY "Power supply %d (%s) OK." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -1317,7 +1307,7 @@ snTrapVrrpeIfStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a VRRPE routing device switched between states master, backup, intialized or uknown." - --#TYPE "Brocade Trap: VRRPE Interface Change" + --#TYPE "Ruckus Wireless Trap: VRRPE Interface Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1330,7 +1320,7 @@ snTrapVsrpIfStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a VSRP switching and routing device switched between states master, backup, intialized or uknown." - --#TYPE "Brocade Trap: VSRP Interface Change" + --#TYPE "Ruckus Wireless Trap: VSRP Interface Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1343,7 +1333,7 @@ snTrapSrcIpAddressViolation NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a rogue device spoofs source IP address for denial of service attack." - --#TYPE "Brocade Trap: Intruder Source IP Address" + --#TYPE "Ruckus Wireless Trap: Intruder Source IP Address" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1354,9 +1344,9 @@ snTrapMacAuthEnable NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when MAC-Authentication is enabled + "The SNMP trap that is generated when MAC-Authentication is enabled on an interface." - --#TYPE "Brocade Trap: MAC-Authentication enabled" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication enabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1367,9 +1357,9 @@ snTrapMacAuthDisable NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when MAC-Authentication is disabled + "The SNMP trap that is generated when MAC-Authentication is disabled on an interface." - --#TYPE "Brocade Trap: MAC-Authentication disabled" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication disabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1380,9 +1370,9 @@ snTrapMacAuthMACAccepted NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when MAC-Authentication is successful + "The SNMP trap that is generated when MAC-Authentication is successful on an interface." - --#TYPE "Brocade Trap: MAC-Authentication success" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication success" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1393,9 +1383,9 @@ snTrapMacAuthMACRejected NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when MAC-Authentication is failed + "The SNMP trap that is generated when MAC-Authentication is failed on an interface." - --#TYPE "Brocade Trap: MAC-Authentication failure" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication failure" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1408,7 +1398,7 @@ snTrapMacAuthPortDisabled NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when an interface is disabled due to MAC-Authentication detecting a DOS attack on that interface." - --#TYPE "Brocade Trap: MAC-Authentication port disabled" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication port disabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY CRITICAL @@ -1421,9 +1411,9 @@ snTrapClientLoginReject NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when a login attempt by a + "The SNMP trap that is generated when a login attempt by a telnet or SSH client fails." - --#TYPE "Brocade Trap: Client Login Reject" + --#TYPE "Ruckus Wireless Trap: Client Login Reject" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1435,7 +1425,7 @@ snTrapLocalUserConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a local user configuration is changed." - --#TYPE "Brocade Trap: Local User Config Change" + --#TYPE "Ruckus Wireless Trap: Local User Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1447,7 +1437,7 @@ snTrapVlanConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a vlan configuration is changed." - --#TYPE "Brocade Trap: Vlan Config Change" + --#TYPE "Ruckus Wireless Trap: Vlan Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1459,7 +1449,7 @@ snTrapAclConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a ACL configuration is changed." - --#TYPE "Brocade Trap: ACL Config Change" + --#TYPE "Ruckus Wireless Trap: ACL Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1471,7 +1461,7 @@ snTrapMacFilterConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a MAC Filter configuration is changed." - --#TYPE "Brocade Trap: MAC Filter Config Change" + --#TYPE "Ruckus Wireless Trap: MAC Filter Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1483,7 +1473,7 @@ snTrapSNMPConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a SNMP configuration is changed." - --#TYPE "Brocade Trap: SNMP Config Change" + --#TYPE "Ruckus Wireless Trap: SNMP Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1494,9 +1484,8 @@ snTrapSyslogConfigChange NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when syslog is enabled/disabled - globally, or when a syslog server is added/deleted." - --#TYPE "Brocade Trap: Syslog Config Change" + "The SNMP trap that is generated when a Syslog configuration is changed." + --#TYPE "Ruckus Wireless Trap: Syslog Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1508,7 +1497,7 @@ snTrapPasswordConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when enable or line password is changed." - --#TYPE "Brocade Trap: Password Config Change" + --#TYPE "Ruckus Wireless Trap: Password Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1520,7 +1509,7 @@ snTrapServerStatusChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a server is disabled or enabled." - --#TYPE "Brocade Trap: Server Status Change" + --#TYPE "Ruckus Wireless Trap: Server Status Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1533,7 +1522,7 @@ snTrapL4RealServerPortMaxConnectionLimitReached NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the real server's port reaches maximum number of connections." - --#TYPE "Brocade Trap: L4 Real Server Port Max Connection Limit" + --#TYPE "Ruckus Wireless Trap: L4 Real Server Port Max Connection Limit" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -1545,7 +1534,7 @@ snTrapL4LinkDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the ISP link goes down." - --#TYPE "Brocade Trap: L4 " + --#TYPE "Ruckus Wireless Trap: L4 " --#SUMMARY "ISP Link %s bound to ve %d is down." --#ARGUMENTS { 0, 1 } --#SEVERITY WARNING @@ -1557,7 +1546,7 @@ snTrapL4LinkUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the ISP link goes up." - --#TYPE "Brocade Trap: L4 " + --#TYPE "Ruckus Wireless Trap: L4 " --#SUMMARY "ISP Link %s bound to ve %d is up." --#ARGUMENTS { 0, 1 } --#SEVERITY WARNING @@ -1569,7 +1558,7 @@ snTrapPortPriorityChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the priority of a port is changed." - --#TYPE "Brocade Trap: Port Priority Change" + --#TYPE "Ruckus Wireless Trap: Port Priority Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1581,7 +1570,7 @@ snTrapAutoPortDisableTrigger NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when automatic port disable was triggered." - --#TYPE "Brocade Trap: Automatic Port Disable Triggered " + --#TYPE "Ruckus Wireless Trap: Automatic Port Disable Triggered " --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -1593,7 +1582,7 @@ snTrapAutoPortDisableRelease NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when automatic port disable was released." - --#TYPE "Brocade Trap: Automatic Port Disable Released " + --#TYPE "Ruckus Wireless Trap: Automatic Port Disable Released " --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -1605,10 +1594,10 @@ snTrapPnPStatusChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when plug-and-play status change." - --#TYPE "Brocade Trap: Plug-and-play Status Change " + --#TYPE "Ruckus Wireless Trap: Plug-and-play Status Change " --#SUMMARY "Plug and Play status changed from %d to %d due to %s." --#ARGUMENTS { 0, 1, 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 125 } @@ -1617,10 +1606,10 @@ snTrapWirelessIsrpPeerStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when ISRP Peer changes state." - --#TYPE "Brocade Trap: ISRP Peer's state has changed " + --#TYPE "Ruckus Wireless Trap: ISRP Peer's state has changed " --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 126 } @@ -1629,10 +1618,10 @@ snTrapWirelessStationStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a wireless station's state changes." - --#TYPE "Brocade Trap: Wireless Station's state has changed." + --#TYPE "Ruckus Wireless Trap: Wireless Station's state has changed." --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 127 } @@ -1642,10 +1631,10 @@ snTrapWirelessStationRoamingEventTriggered NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when we received a MOVE request from the AP" - --#TYPE "Brocade Trap: Station has roamed " + --#TYPE "Ruckus Wireless Trap: Station has roamed " --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 128 } @@ -1655,10 +1644,10 @@ snTrapWirelessSappStateChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when SAPP between an AP and a FIPS changes state." - --#TYPE "Brocade Trap: SAPP between AP and FIPS changes state. " + --#TYPE "Ruckus Wireless Trap: SAPP between AP and FIPS changes state. " --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 129 } @@ -1668,7 +1657,7 @@ snTrapExternalPowerConnectionStatus NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the external power supply connecting or disconnecting to a power over ethernet module." - --#TYPE "Brocade Trap: External Power Supply Change" + --#TYPE "Ruckus Wireless Trap: External Power Supply Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -1681,7 +1670,7 @@ snTrapDot1xSecurityViolation NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a malicious mac address was detected." - --#TYPE "Brocade Trap: 802.1x Security Violation" + --#TYPE "Ruckus Wireless Trap: 802.1x Security Violation" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -1694,10 +1683,10 @@ snTrapDot1xPortLinkChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when software port link status has changed to up or down." - --#TYPE "Brocade Trap: 802.1x Port Link Change" + --#TYPE "Ruckus Wireless Trap: 802.1x Port Link Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 132 } @@ -1707,10 +1696,10 @@ snTrapDot1xPortControlChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when software port control status has changed to authorize or unauthorize." - --#TYPE "Brocade Trap: 802.1x Port Control Change" + --#TYPE "Ruckus Wireless Trap: 802.1x Port Control Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 133 } @@ -1720,10 +1709,10 @@ snTrapDot1xVlanIdChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when VLAN ID of a port has changed." - --#TYPE "Brocade Trap: 802.1x VLAN ID Change" + --#TYPE "Ruckus Wireless Trap: 802.1x VLAN ID Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 134 } @@ -1733,10 +1722,10 @@ snTrapDot1xFilterSetupFailure NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when software failed to setup a filter to a mac address of a port." - --#TYPE "Brocade Trap: 802.1x Filter Setup Failure" + --#TYPE "Ruckus Wireless Trap: 802.1x Filter Setup Failure" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 135 } @@ -1746,7 +1735,7 @@ snTrapDot1xError NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when software detected system error." - --#TYPE "Brocade Trap: 802.1x Error" + --#TYPE "Ruckus Wireless Trap: 802.1x Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY DEBUGGING @@ -1758,7 +1747,7 @@ snTrapPortConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a port configuration is changed." - --#TYPE "Brocade Trap: Port Config Change" + --#TYPE "Ruckus Wireless Trap: Port Config Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1771,10 +1760,10 @@ snTrapMacAuthVlanIdChange NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when VLAN ID of a port has changed." - --#TYPE "Brocade Trap: MAC-Authentication VLAN ID Change" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication VLAN ID Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 138 } @@ -1783,7 +1772,7 @@ snTrapWebAuthEnabled NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when web authentication is enabled." - --#TYPE "Brocade Trap: Web Authentication Enabled" + --#TYPE "Ruckus Wireless Trap: Web Authentication Enabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1795,7 +1784,7 @@ snTrapWebAuthDisabled NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when web authentication is disabled." - --#TYPE "Brocade Trap: Web Authentication Disabled" + --#TYPE "Ruckus Wireless Trap: Web Authentication Disabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1807,7 +1796,7 @@ snTrapIpConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when IP system address changes." - --#TYPE "Brocade Trap: IP Configuration Change" + --#TYPE "Ruckus Wireless Trap: IP Configuration Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1819,7 +1808,7 @@ snTrapIpv6ConfigChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when IPv6 system address changes." - --#TYPE "Brocade Trap: IPv6 Configuration Change" + --#TYPE "Ruckus Wireless Trap: IPv6 Configuration Change" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -1832,10 +1821,10 @@ snTrapMacAuthRadiusTimeout NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a request from Mac-Auth to RADIUS has not been answered within the retry and time limit." - --#TYPE "Brocade Trap: MAC-Authentication RADIUS timeout" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication RADIUS timeout" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 143 } @@ -1845,10 +1834,10 @@ snTrapDot1xRadiusTimeout NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a request from 802.1x to RADIUS has not been answered within the retry and time limit." - --#TYPE "Brocade Trap: MAC-Authentication RADIUS timeout" + --#TYPE "Ruckus Wireless Trap: MAC-Authentication RADIUS timeout" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 144 } @@ -1858,10 +1847,10 @@ snTrapUDLDLinkDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when UDLD port link status has changed to down." - --#TYPE "Brocade Trap: UDLD Port Link Down" + --#TYPE "Ruckus Wireless Trap: UDLD Port Link Down" --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 145 } @@ -1871,10 +1860,10 @@ snTrapUDLDLinkUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when UDLD port link status has changed to up." - --#TYPE "Brocade Trap: UDLD Port Link Up" + --#TYPE "Ruckus Wireless Trap: UDLD Port Link Up" --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 146 } @@ -1883,10 +1872,10 @@ snTrapMacBasedVlanEnabled NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when MAC based VLAN is enabled." - --#TYPE "Brocade Trap: MAC based VLAN enabled" + --#TYPE "Ruckus Wireless Trap: MAC based VLAN enabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 147 } @@ -1895,10 +1884,10 @@ snTrapMacBasedVlanDisabled NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when MAC based VLAN is disabled." - --#TYPE "Brocade Trap: MAC based VLAN disabled" + --#TYPE "Ruckus Wireless Trap: MAC based VLAN disabled" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 148 } @@ -1908,7 +1897,7 @@ snTrapChasFanNormal NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a fan operational status changed from failure to normal." - --#TYPE "Brocade Trap: Fan OK" + --#TYPE "Ruckus Wireless Trap: Fan OK" --#SUMMARY "Fan %d (%s) OK." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -1920,34 +1909,34 @@ snTrapStpRootGuardDetect NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when VLAN's Root-Guarded port received superior BPDU." - --#TYPE "Brocade Trap: Stp root guard detect" + --#TYPE "Ruckus Wireless Trap: Stp root guard detect" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL - ::= { snTraps 150 } + ::= { snTraps 150 } snTrapStpRootGuardExpire NOTIFICATION-TYPE OBJECTS {ifIndex, snVLanByPortCfgVLanId, snAgGblTrapMessage} STATUS current DESCRIPTION "The SNMP trap that is generated when VLAN's ports's Root-Guard expire." - --#TYPE "Brocade Trap: Stp root guard expire" + --#TYPE "Ruckus Wireless Trap: Stp root guard expire" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 151 } - + snTrapStpBPDUGuardDetect NOTIFICATION-TYPE OBJECTS {ifIndex, snVLanByPortCfgVLanId, snAgGblTrapMessage} STATUS current DESCRIPTION "The SNMP trap that is generated when VLAN's BPDU-guarded port received BPDU . " - --#TYPE "Brocade Trap: STP BPDU guard " + --#TYPE "Ruckus Wireless Trap: STP BPDU guard " --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 152 } @@ -1956,10 +1945,10 @@ snTrapMstpBPDUGuardDetect NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when BPDU-guarded port received BPDU . " - --#TYPE "Brocade Trap: MSTP BPDU guard " + --#TYPE "Ruckus Wireless Trap: MSTP BPDU guard " --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 153 } @@ -1968,10 +1957,10 @@ snTrapErrorDisableAction NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when Interface error-disable is hit or recovery times out . " - --#TYPE "Brocade Trap: Error-disable hit or recovery times out" + --#TYPE "Ruckus Wireless Trap: Error-disable hit or recovery times out" --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 154 } @@ -1980,10 +1969,10 @@ snTrapLACPLinkStateChange NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when LACP port changes its state. " - --#TYPE "Brocade Trap: LACP port state change" + --#TYPE "Ruckus Wireless Trap: LACP port state change" --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 155 } @@ -1991,8 +1980,8 @@ snTrapOpticalMonitoringNotFoundryOptics NOTIFICATION-TYPE OBJECTS {snAgGblTrapMessage} STATUS current DESCRIPTION - "The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Foundry Networks." - --#TYPE "Brocade Trap: Optical Monitoring Not Brocade Optics" + "The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Ruckus Wireless, Inc." + --#TYPE "Ruckus Wireless Trap: Optical Monitoring Not Ruckus Wireless, Inc Optics" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2003,8 +1992,8 @@ snTrapOpticalMonitoringFoundryOpticsNotCapable NOTIFICATION-TYPE OBJECTS {snAgGblTrapMessage} STATUS current DESCRIPTION - "The SNMP trap that is generated if optical monitoring is enabled but the Foundry optic is not capable." - --#TYPE "Brocade Trap: Optical Monitoring Optics Not Capable" + "The SNMP trap that is generated if optical monitoring is enabled but the Ruckus Wireless optic is not capable." + --#TYPE "Ruckus Wireless Trap: Optical Monitoring Optics Not Capable" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2018,10 +2007,10 @@ snTrapStaticMulticastMacConfigAdd NOTIFICATION-TYPE "The SNMP trap that is generated if a new entry is added to static multicast mac configuration table. Format 1: Static Mac entry with Mac Address is added to portnumber on VLAN Format 2: Static Mac entry with Mac Address is added to portmask <0xXXXXXXXX-XXXXXXXX> on VLAN " - --#TYPE "Brocade Trap: New Entry is Added To Static Multicast Mac Configuration Table." + --#TYPE "Ruckus Wireless Trap: New Entry is Added To Static Multicast Mac Configuration Table." --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 158 } @@ -2032,10 +2021,10 @@ snTrapStaticMulticastMacConfigRemove NOTIFICATION-TYPE "The SNMP trap that is generated if an entry is removed from static multicast mac configuration table . Format 1: Static Mac entry with Mac Address is deleted from portnumber on VLAN Format 2: Static Mac entry with Mac Address is deleted from portmask <0xXXXXXXXX-XXXXXXXX> on VLAN " - --#TYPE "Brocade Trap: Entry is Removed From Static Multicast Mac Configuration Table." + --#TYPE "Ruckus Wireless Trap: Entry is Removed From Static Multicast Mac Configuration Table." --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 159 } @@ -2045,10 +2034,10 @@ snTrapSTPBPDUGuardExpire NOTIFICATION-TYPE DESCRIPTION "The SNMP notification that is generated when a port is re-enabled after being disabled due to BPDU Guard Violation. Format: STP: BPDU Guard re-enabled on VLAN port /" - --#TYPE "Brocade Trap: STP BPDU Guard Expire" + --#TYPE "Ruckus Wireless Trap: STP BPDU Guard Expire" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 160 } @@ -2058,10 +2047,10 @@ snTrapPortLoopDetection NOTIFICATION-TYPE DESCRIPTION "The SNMP notification is generated when a port loop is detected. Format: LOOP DETECTION: VLAN , port / detect, putting into err-disable state" - --#TYPE "Brocade Trap: Port Loop Detection" + --#TYPE "Ruckus Wireless Trap: Port Loop Detection" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 161 } @@ -2070,7 +2059,7 @@ snTrapNoFreeTcamEntry NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when system is running out of TCAM spaces allocated for routing entries. " - --#TYPE "Brocade Trap: No TCAM free entry" + --#TYPE "Ruckus Wireless Trap: No TCAM free entry" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2084,7 +2073,7 @@ snTrapStackingMasterElected NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a unit is elected as Master unit for the stacking system." - --#TYPE "Brocade Trap: Unit is elected as Master" + --#TYPE "Ruckus Wireless Trap: Unit is elected as Master" --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY MINOR @@ -2096,7 +2085,7 @@ snTrapStackingMasterElected NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a unit has been added to the stacking system." - --#TYPE "Brocade Trap: Unit is added" + --#TYPE "Ruckus Wireless Trap: Unit is added" --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY MINOR @@ -2108,7 +2097,7 @@ snTrapStackingMasterElected NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when a unit has been deleted from the stacking system." - --#TYPE "Brocade Trap: Unit is deleted" + --#TYPE "Ruckus Wireless Trap: Unit is deleted" --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY MINOR @@ -2121,20 +2110,20 @@ snTrapStackingChasPwrSupplyOK NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a power supply operational status changed from failure to normal for a stacking system." - --#TYPE "Brocade Trap: Stacking Power Supply OK" + --#TYPE "Ruckus Wireless Trap: Stacking Power Supply OK" --#SUMMARY "%s." --#ARGUMENTS { 2 } --#SEVERITY MINOR --#STATE OPERATIONAL ::= { snTraps 166 } - + snTrapStackingChasPwrSupplyFailed NOTIFICATION-TYPE OBJECTS { snChasUnitIndex, snChasPwrSupplyIndex, snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when a power supply operational status changed from normal to failure for a stacking system." - --#TYPE "Brocade Trap: Stacking Power Supply Failure" + --#TYPE "Ruckus Wireless Trap: Stacking Power Supply Failure" --#SUMMARY "%s." --#ARGUMENTS { 2 } --#SEVERITY MINOR @@ -2147,20 +2136,20 @@ snTrapStackingChasFanNormal NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a fan operational status changed from failure to normal for a stacking system" - --#TYPE "Brocade Trap: Stacking Fan OK" + --#TYPE "Ruckus Wireless Trap: Stacking Fan OK" --#SUMMARY "Stack-unit %d Fan %d (%s) OK." --#ARGUMENTS { 0, 1, 2} --#SEVERITY MINOR --#STATE OPERATIONAL ::= { snTraps 168 } - + snTrapStackingChasFanFailed NOTIFICATION-TYPE OBJECTS { snChasUnitIndex, snChasFanIndex, snChasFanDescription } STATUS current DESCRIPTION "The SNMP trap that is generated when a fan fails to operate normally for a stacking system." - --#TYPE "Brocade Trap: Stacking Fan Failure" + --#TYPE "Ruckus Wireless Trap: Stacking Fan Failure" --#SUMMARY "Stack-unit %d Fan %d (%s) failed." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MINOR @@ -2173,12 +2162,12 @@ snTrapStackingChasFanFailed NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the managemnet MAC address of a stacking system has been changed." - --#TYPE "Brocade Trap: The management MAC address changed " + --#TYPE "Ruckus Wireless Trap: The management MAC address changed " --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL - ::= { snTraps 170 } + ::= { snTraps 170 } snTrapStackingTemperatureWarning NOTIFICATION-TYPE OBJECTS { snChasUnitIndex, snAgGblTrapMessage } @@ -2187,7 +2176,7 @@ snTrapStackingChasFanFailed NOTIFICATION-TYPE "The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold for a stack sytem." - --#TYPE "Brocade Trap: Stacking Temperature Warning" + --#TYPE "Ruckus Wireless Trap: Stacking Temperature Warning" --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY CRITICAL @@ -2200,7 +2189,7 @@ snTrapIfIndexAssignmentChanged NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the Interface Index (IfIndex) assignment for the physical interfaces was changed." - --#TYPE "Brocade Trap: IfIndex Assignment Changed" + --#TYPE "Ruckus Wireless Trap: IfIndex Assignment Changed" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2211,9 +2200,9 @@ snTrapPBRConfigChanged NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when a Policy Based Routing (PBR) routemap + "The SNMP trap that is generated when a Policy Based Routing (PBR) routemap is bound or unbound either globally or to an interface." - --#TYPE "Brocade Trap: Policy Based Routing (PBR) Config Changed " + --#TYPE "Ruckus Wireless Trap: Policy Based Routing (PBR) Config Changed " --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2224,22 +2213,22 @@ snTrapChasPwrSupplyRPSAdd NOTIFICATION-TYPE OBJECTS { snChasPwrSupplyIndex, snChasPwrSupplyDescription } STATUS current DESCRIPTION - "The SNMP trap that is generated when an External Redundant + "The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is added to the system." - --#TYPE "Brocade Trap: Power Supply RPS Added" + --#TYPE "Ruckus Wireless Trap: Power Supply RPS Added" --#SUMMARY "External redundant power supply %d (%s) added." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR --#STATE OPERATIONAL ::= { snTraps 174} - + snTrapChasPwrSupplyRPSRemove NOTIFICATION-TYPE OBJECTS { snChasPwrSupplyIndex, snChasPwrSupplyDescription } STATUS current DESCRIPTION - "The SNMP trap that is generated when an External Redundant + "The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is removed from the system." - --#TYPE "Brocade Trap: Power Supply RPS Removed" + --#TYPE "Ruckus Wireless Trap: Power Supply RPS Removed" --#SUMMARY "External redundant power supply %d (%s) removed." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -2253,10 +2242,10 @@ snTrapModuleStatusChange NOTIFICATION-TYPE "The SNMP notification that is generated when a module's operational state changes. The management entity receiving the notification can identify the module and the event by referencing snChasUnitIndex, snAgentBrdIndex, snAgentBrdModuleStatus. - In case of a module-down event, the varbind snAgGblTrapMessage is a text string + In case of a module-down event, the varbind snAgGblTrapMessage is a text string that describes the cause. In case of module-up event, snAgGblTrapMessage is a null string. " - --#TYPE "Brocade Trap: Module status changed" + --#TYPE "Ruckus Wireless Trap: Module status changed" --#SUMMARY " Module %d (of unit %d) changed state to %d due to reason: %s." --#ARGUMENTS { 1,0,2,3 } --#SEVERITY NOTIFICATION @@ -2268,7 +2257,7 @@ snTrapChasHighSpeedFansNeeded NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when chassis doesn't have high speed fans for specific modules" - --#TYPE "Brocade Trap: High Speed fans needed" + --#TYPE "Ruckus Wireless Trap: High Speed fans needed" --#SUMMARY "%s" --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2282,7 +2271,7 @@ snTrapSysmaxReverted NOTIFICATION-TYPE "The SNMP trap that is generated when the revertible sysmax elements are reverted during the card bringup if they can not be accomodated in the available memory." - --#TYPE "Brocade Trap: Sysmax Reverted" + --#TYPE "Ruckus Wireless Trap: Sysmax Reverted" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2296,7 +2285,7 @@ snTrapSysmaxLeftLowMem NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when its found during bootup that the configured sysmax set shall leave less than 10% available memory free." - --#TYPE "Brocade Trap: Sysmax Left Low Memory" + --#TYPE "Ruckus Wireless Trap: Sysmax Left Low Memory" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2310,7 +2299,7 @@ snTrapSysMemoryLowThreshold NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the available dynamic memory in a card is below 5% of the installed physical memory." - --#TYPE "Brocade Trap: Low Available Memory" + --#TYPE "Ruckus Wireless Trap: Low Available Memory" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2324,7 +2313,7 @@ snTrapSysMemoryOutThreshold NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the dynamic memory fails to be allocated in a system." - --#TYPE "Brocade Trap: Failed Memory Allocation" + --#TYPE "Ruckus Wireless Trap: Failed Memory Allocation" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2337,10 +2326,10 @@ snTrapLinkOAMLinkDown NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when Link-OAM port link status has changed to down." - --#TYPE "Brocade Trap: Link-OAM Port Link Change" + --#TYPE "Ruckus Wireless Trap: Link-OAM Port Link Change" --#SUMMARY "%s" --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 182 } @@ -2350,10 +2339,10 @@ snTrapLinkOAMLinkUp NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when Link-OAM port link status has changed to up." - --#TYPE "Brocade Trap: Link-OAM Port Link Change" + --#TYPE "Ruckus Wireless Trap: Link-OAM Port Link Change" --#SUMMARY "%s" --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 183 } @@ -2362,86 +2351,86 @@ snTrapI2CAccessLog NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated to provide information about state of the management module's I2C accesses." - --#TYPE "Brocade Trap: MP I2C access data" + --#TYPE "Ruckus Wireless Trap: MP I2C access data" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING --#STATE OPERATIONAL ::= { snTraps 184 } - + snTrapLinkOAMLoopbackEntered NOTIFICATION-TYPE OBJECTS {ifIndex, dot3OamLoopbackStatus, snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when Link-OAM port has entered loopback mode. The link is not useful for data transfer any more." - --#TYPE "Brocade Trap: Link-OAM Port Loopback Mode" + --#TYPE "Ruckus Wireless Trap: Link-OAM Port Loopback Mode" --#SUMMARY "%s" --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 185 } - + snTrapLinkOAMLoopbackCleared NOTIFICATION-TYPE OBJECTS {ifIndex, dot3OamLoopbackStatus, snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when Link-OAM port has entered loopback mode. The link is not useful for data transfer any more." - --#TYPE "Brocade Trap: Link-OAM Port Loopback Mode" + --#TYPE "Ruckus Wireless Trap: Link-OAM Port Loopback Mode" --#SUMMARY "%s" --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 186 } - + snTrapLicenseAdded NOTIFICATION-TYPE - OBJECTS { fdryLicenseType, snAgGblTrapMessage } - STATUS current + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a new license is added to the system." - --#TYPE "Brocade Trap: New license added" - --#SUMMARY "%s" - --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS - --#STATE OPERATIONAL + --#TYPE "Ruckus Wireless Trap: New license added" + --#SUMMARY "%s" + --#ARGUMENTS { 1 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL ::= { snTraps 187 } snTrapLicenseRemoved NOTIFICATION-TYPE - OBJECTS { fdryLicenseType, snAgGblTrapMessage } - STATUS current + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when an existing license is removed from the system." - --#TYPE "Brocade Trap: License removed" - --#SUMMARY "%s" - --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS - --#STATE OPERATIONAL + --#TYPE "Ruckus Wireless Trap: License removed" + --#SUMMARY "%s" + --#ARGUMENTS { 1 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL ::= { snTraps 188 } snTrapLicenseExpires NOTIFICATION-TYPE - OBJECTS { fdryLicenseType, snAgGblTrapMessage } - STATUS current + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a trial license is about to expire. This trap is generated daily for last 3 days and every 2 hours on the last day of expire." - --#TYPE "Brocade Trap: License is about to expire" - --#SUMMARY "%s" - --#ARGUMENTS { 1 } - --#SEVERITY WARNING - --#STATE OPERATIONAL + --#TYPE "Ruckus Wireless Trap: License is about to expire" + --#SUMMARY "%s" + --#ARGUMENTS { 1 } + --#SEVERITY WARNING + --#STATE OPERATIONAL ::= { snTraps 189 } snTrapLicenseExpired NOTIFICATION-TYPE - OBJECTS { fdryLicenseType, snAgGblTrapMessage } - STATUS current + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a trial license has expired." - --#TYPE "Brocade Trap: License expired" - --#SUMMARY "%s" - --#ARGUMENTS { 1 } - --#SEVERITY WARNING - --#STATE OPERATIONAL + --#TYPE "Ruckus Wireless Trap: License expired" + --#SUMMARY "%s" + --#ARGUMENTS { 1 } + --#SEVERITY WARNING + --#STATE OPERATIONAL ::= { snTraps 190 } snTrapUDLDCrcFailureDetected NOTIFICATION-TYPE @@ -2449,70 +2438,19 @@ snTrapUDLDCrcFailureDetected NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when UDLD detects CRC failures on PDUs received on a port" - --#TYPE "Brocade Trap: UDLD detected CRC failures " + --#TYPE "Ruckus Wireless Trap: UDLD detected CRC failures " --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY WARNING --#STATE OPERATIONAL ::= { snTraps 191 } --- 802.1ag traps to match the generated syslog - -snTrapDot1agCfmRemoteMEPAgeOut NOTIFICATION-TYPE - OBJECTS {dot1agCfmMdName, dot1agCfmMaNetName, dot1agCfmMepDbRMepState, snAgGblTrapMessage} - STATUS current - DESCRIPTION - "The SNMP trap that is generated when 802.1ag Remote MEP ages out." - --#TYPE "Brocade Trap: DOT1AG Remote MEP Age Out " - --#SUMMARY "%s." - --#ARGUMENTS { 3 } - --#SEVERITY WARNING - --#STATE OPERATIONAL - ::= { snTraps 192 } - -snTrapDot1agCfmRemoteMEPUp NOTIFICATION-TYPE - OBJECTS {dot1agCfmMdName, dot1agCfmMaNetName, dot1agCfmMepDbRMepState, snAgGblTrapMessage} - STATUS current - DESCRIPTION - "The SNMP trap that is generated when 802.1ag Remote MEP is up." - --#TYPE "Brocade Trap: DOT1AG Remote MEP is up " - --#SUMMARY "%s." - --#ARGUMENTS { 3 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 193 } - -snTrapDot1agCfmDomainCrossConnection NOTIFICATION-TYPE - OBJECTS {dot1agCfmMdName, dot1agCfmMaNetName, snAgGblTrapMessage} - STATUS current - DESCRIPTION - "The SNMP trap that is generated when 802.1ag domain gets cross-connected." - --#TYPE "Brocade Trap: DOT1AG Domain Cross Connect " - --#SUMMARY "%s." - --#ARGUMENTS { 2 } - --#SEVERITY WARNING - --#STATE OPERATIONAL - ::= { snTraps 194 } - -snTrapDot1agCfmDuplicateMEPId NOTIFICATION-TYPE - OBJECTS {dot1agCfmMdName, dot1agCfmMaNetName, dot1agCfmMepDbRMepState, snAgGblTrapMessage} - STATUS current - DESCRIPTION - "The SNMP trap that is generated when 802.1ag Remote MEP reports a duplicate MEP Id - that conflicts with local MEP Id." - --#TYPE "Brocade Trap: DOT1AG Duplicate MEP Id " - --#SUMMARY "%s." - --#ARGUMENTS { 3 } - --#SEVERITY WARNING - --#STATE OPERATIONAL - ::= { snTraps 195 } - snTrapStackingStandbyElected NOTIFICATION-TYPE OBJECTS { snChasUnitIndex, snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when a unit is elected as Standby unit for the stacking system." - --#TYPE "Brocade Trap: Unit is elected as Standby" + --#TYPE "Ruckus Wireless Trap: Unit is elected as Standby" --#SUMMARY "%s." --#ARGUMENTS { 1 } --#SEVERITY MINOR @@ -2526,10 +2464,10 @@ snTrapMacMoveThresholdRate NOTIFICATION-TYPE "The SNMP notification is generated when MAC movement exceeding the certain threshold for a sampling interval is detected. Format: Mac-Move threshold-rate: MAC address moved from interface to interface for vlan , times exceeding the threshold rate for a sampling interval seconds" - --#TYPE "Brocade Trap: MAC movement threshold-rate Detection" + --#TYPE "Ruckus Wireless Trap: MAC movement threshold-rate Detection" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 197 } @@ -2539,10 +2477,10 @@ snTrapMacMoveIntervalHistory NOTIFICATION-TYPE DESCRIPTION "The SNMP notification is generated every user configured interval, summarizing the moves in the interval . Format: Mac-Move Interval-History: <#macs> macs moved in last seconds. Total number of mac moves in the interval is <#moves>" - --#TYPE "Brocade Trap: MAC movement interval-history Detection" + --#TYPE "Ruckus Wireless Trap: MAC movement interval-history Detection" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 198 } @@ -2552,26 +2490,26 @@ snTrapStackingMixedModeChanged NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when a stacking system mode is changed. Format: The stacking system is changed to Mixed Stacking mode " - --#TYPE "Brocade Trap: The system mixed stacking mode is changed" + --#TYPE "Ruckus Wireless Trap: The system mixed stacking mode is changed" --#SUMMARY "%s." --#ARGUMENTS { 0, 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 199 } - snTrapSysMonErrorDetect NOTIFICATION-TYPE +snTrapSysMonErrorDetect NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP notification is generated when SYSMON detects internal error." - --#TYPE "Brocade Trap: SYSMON error Detection" + --#TYPE "Ruckus Wireless Trap: SYSMON error Detection" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING --#STATE OPERATIONAL ::= { snTraps 200 } - snTrapMacNotification NOTIFICATION-TYPE +snTrapMacNotification NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION @@ -2580,10 +2518,10 @@ snTrapStackingMixedModeChanged NOTIFICATION-TYPE ...MAC:-VLAN:-PORT:-ACT::: where action: 1-MAC addition; 2-MAC deletion; 3-remove all MACs; 4-remove MAC from a port; 5-remove MAC from a VLAN; 6-remove MAC from a VLAN on a port" - --#TYPE "Brocade Trap: MAC event notification" + --#TYPE "Ruckus Wireless Trap: MAC event notification" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 201 } @@ -2593,7 +2531,7 @@ snTrapMacEventBufferFull NOTIFICATION-TYPE DESCRIPTION "The SNMP notification is generated when MAC event buffer full is detected. Format: MAC-Event: The Buffer is full, FDB table walk is required" - --#TYPE "Brocade Trap: MAC event buffer full detection" + --#TYPE "Ruckus Wireless Trap: MAC event buffer full detection" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2605,10 +2543,10 @@ snTrapStpDesignatedGuardDetect NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when VLAN's ports's Designated-Guard detect." - --#TYPE "Foundry Trap: Stp designated guard detect" + --#TYPE "Ruckus Wireless Trap: Stp designated guard detect" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 203 } @@ -2617,55 +2555,55 @@ snTrapStpDesignatedGuardDisable NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when VLAN's ports's Designated-Guard disable." - --#TYPE "Foundry Trap: Stp designated guard disable" + --#TYPE "Ruckus Wireless Trap: Stp designated guard disable" --#SUMMARY "%s." --#ARGUMENTS { 2 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 204 } snTrapLicenseNNLLTrialNotify NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } - STATUS current + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a non-node locked licensed feature is enabled with no a non-node locked license installed. Format: Stack : Use of the feature requires a license to be purchased and installed within days. " - --#TYPE "Foundry Trap: add a NNLL license" + --#TYPE "Ruckus Wireless Trap: add a NNLL license" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 205 } snTrapLicenseNNLLTrialExpiry NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } - STATUS current + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a non-node locked licensed feature is enabled after 30-44 days with no a non-node locked license installed. This message will be displayed 3 times day 30, day 37, day 44. Format: Stack : The feature has been activated for days. To ensure compliance, please purchase and install a license as soon as possible " - --#TYPE "Foundry Trap: Need to add a NNLL license" + --#TYPE "Ruckus Wireless Trap: Need to add a NNLL license" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 206 } snTrapLicenseNNLLNonCompliant NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } - STATUS current + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a non-node locked licensed feature is enabled after 45+ days whit no a non-node locked license installed. Or deletion of an installed license if any of the - associated features are still enabled. This message will be displayed daily. - Format: Stack : THIS UNIT IS NOT COMPLIANT. A license for feature must + associsted features are still enabled. This message will be displayed daily. + Format: Stack : THIS UNIT IS NOT COMPLIANT. A license for feature must be purchased and installed or the feature must be deactivated to become compliant with the terms and conditions of use " - --#TYPE "Foundry Trap: have to add a NNLL license" + --#TYPE "Ruckus Wireless Trap: have to add a NNLL license" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2674,14 +2612,14 @@ snTrapLicenseNNLLNonCompliant NOTIFICATION-TYPE snTrapLicenseNNLLDelete NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } - STATUS current + STATUS deprecated DESCRIPTION "The SNMP trap that is generated when a non-node locked licensed feature is enabled after a non-node locked license is deleted. - Format: Stack : The license has been deleted on this unit and is available + Format: Stack : The license has been deleted on this unit and is available for redeployment on another unit in accordance with the terms and conditions of use. All features associated to this license must be disabled" - --#TYPE "Foundry Trap: delete a NNLL license" + --#TYPE "Ruckus Wireless Trap: delete a NNLL license" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2696,25 +2634,292 @@ snTrapLicenseNNLLNonCompliant NOTIFICATION-TYPE to notify the user to check the connections in a stacking system Format: Background diagnosis detects connection errors. Please use show stack conn to view detailed connections" - --#TYPE "Foundry Trap: check stack connections" + --#TYPE "Ruckus Wireless Trap: check stack connections" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 209 } - + snTrapStackingStandByChangedStandalone NOTIFICATION-TYPE OBJECTS { snChasUnitIndex, snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when a unit is changed from Standby to Stand alone when the active unit is down." - --#TYPE "Brocade Trap: Unit is changed from standby to standalone" + --#TYPE "Ruckus Wireless Trap: Unit is changed from standby to standalone" --#SUMMARY "%s." --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS + --#SEVERITY NOTIFICATION --#STATE OPERATIONAL ::= { snTraps 210 } +snTrapBroadcastlimit NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated after reached the Broadcast limit." + --#TYPE "Ruckus Wireless Trap: reached the Broadcast limit" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY INFORMATIONAL + --#STATE OPERATIONAL + ::= { snTraps 211 } + +snTrapMulticastlimit NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated after reached the Multicast limit." + --#TYPE "Ruckus Wireless Trap: reached the Multicast limit" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY INFORMATIONAL + --#STATE OPERATIONAL + ::= { snTraps 212 } + +snTrapUnicastlimit NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated after reached the Unknown Unicast limit." + --#TYPE "Ruckus Wireless Trap: reached the Unknown unicast limit" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY INFORMATIONAL + --#STATE OPERATIONAL + ::= { snTraps 213 } + +-- snTraps 214 for snTrapPsuFanStateChange +snTrapPsuFanStateChange NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when the PSU fan status changed." + --#TYPE "Ruckus Wireless Trap: PSU fan status changed" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY INFORMATIONAL + --#STATE OPERATIONAL + ::= { snTraps 214 } + +snTrapStackISSUSystemCompleted NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when system completed stack upgrade process. + Format: Stack: system upgrade completed" + --#TYPE "Ruckus Wireless Trap: System completed upgrade" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL + ::= { snTraps 215 } + +snTrapStackISSUSystemFailed NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when system failed stack upgrade process. + Format: Stack: system upgrade failed" + --#TYPE "Ruckus Wireless Trap: System failed upgrade" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 216 } + +snTrapStackISSUUnitCompleted NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when unit completed upgrade process. + Format: Stack: stack unit completed upgrade" + --#TYPE "Ruckus Wireless Trap: Unit completed upgrade" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL + ::= { snTraps 217 } + +snTrapStackISSUUnitFailed NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when unit failed upgrade process. + Format: Stack: system upgrade failed, stack unit is in failure state" + --#TYPE "Ruckus Wireless Trap: Unit failed upgrade" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 218 } + + snTrapStackISSUSystemStart NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when system starts stack upgrade process. + Format: Stack: system upgrade started and most of user interfaces are blocked" + --#TYPE "Ruckus Wireless Trap: System strated upgrade" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL + ::= { snTraps 219 } + +snTrapStackingIgnoreShutdownTemperatureThresholdEnabled NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when Ignore Shutdown Temperature + Threshold is enabled for a stack unit." + --#TYPE "Ruckus Wireless Trap: Battleshort mode Enabled " + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 220 } + +snTrapStackingIgnoreShutdownTemperatureThresholdDisabled NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when Ignore Shutdown Temperature + Threshold is disabled for a stack unit." + --#TYPE "Ruckus Wireless Trap: Battleshort mode disabled " + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 221 } + +snTrapGlobalBattleShortModeEnabled NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when battleshort mode is enabled at global level." + --#TYPE "Ruckus Wireless Trap: Battleshort mode enabled " + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 222 } + +snTrapGlobalBattleShortModeDisabled NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when battleshort mode is disabled at global level.." + --#TYPE "Ruckus Wireless Trap: Battleshort mode disabled " + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY ALERTS + --#STATE OPERATIONAL + ::= { snTraps 223 } + +snTrapStackSAUOptionChange NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when SAU license option is changed. + Format: Stack: SAU license option on unit is changed to " + --#TYPE "Ruckus Wireless Trap: SAU license option changed" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL + ::= { snTraps 224 } + +snTrapPMSProtectActivated NOTIFICATION-TYPE + OBJECTS { ifIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when port security violation protect is activated + Format: Security: Port Security violation protect activated on interface ethernet " + --#TYPE "Ruckus Trap: Port Security violation protect activated" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY WARNING + --#STATE OPERATIONAL + ::= { snTraps 225 } + +snTrapPMSProtectDeactivated NOTIFICATION-TYPE + OBJECTS { ifIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when port security violation protect is de-activated + Format: Security: Port Security violation protect de-activated on interface ethernet " + --#TYPE "Ruckus Trap: Port Security violation protect de-activated" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY WARNING + --#STATE OPERATIONAL + ::= { snTraps 226 } + +snTrapStackSAUOptionDeleted NOTIFICATION-TYPE + OBJECTS { snChasUnitIndex, snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when SAU license option is deleted. + Format: Stack: unit deleted SAU license option " + --#TYPE "Ruckus Trap: SAU license option is deleted" + --#SUMMARY "%s." + --#ARGUMENTS { 1 } + --#SEVERITY NOTIFICATION + --#STATE OPERATIONAL + ::= { snTraps 227 } + +snTrapStackCloudManagerConnected NOTIFICATION-TYPE +OBJECTS { snAgGblTrapMessage } +STATUS current +DESCRIPTION +"The SNMP trap that is generated when Clold manager is connected. +Format: Cloud: Cloud manager is connected. All local configuration interfaces are locked" +--#TYPE "Ruckus Wireless Trap: Cloud Manger is connected" +--#SUMMARY "%s." +--#ARGUMENTS { 0 } +--#SEVERITY NOTIFICATION +--#STATE OPERATIONAL +::= { snTraps 228 } + + snTrapStackCloudManagerDisconnected NOTIFICATION-TYPE +OBJECTS { snAgGblTrapMessage } +STATUS current +DESCRIPTION +"The SNMP trap that is generated when Clold manager is disconnected. +Format: Cloud: Cloud manager is connected. All local configuration interfaces are available" +--#TYPE "Ruckus Wireless Trap: Cloud Manger is disconnected" +--#SUMMARY "%s." +--#ARGUMENTS { 0 } +--#SEVERITY NOTIFICATION +--#STATE OPERATIONAL +::= { snTraps 229 } + +snTrapManager2FactorAuthenticationEnabled NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when Manager Two-Factor Authentication is enabled. + Format: MGMT Agent: Manager 2 Factor Authentication enabled." + --#TYPE "Ruckus Wireless Trap: Manager 2 Factor Authentication Enabled" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY NOTIFICATIONS + --#STATE OPERATIONAL + ::= { snTraps 230 } + +snTrapManager2FactorAuthenticationDisabled NOTIFICATION-TYPE + OBJECTS { snAgGblTrapMessage } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when Manager Two-Factor Authentication is disabled. + Format: MGMT Agent: Manager 2 Factor Authentication disabled." + --#TYPE "Ruckus Wireless Trap: Manager 2 Factor Authentication Disabled" + --#SUMMARY "%s." + --#ARGUMENTS { 0 } + --#SEVERITY NOTIFICATIONS + --#STATE OPERATIONAL + ::= { snTraps 231 } -- Trapids from 1000 are reserved for XMR/IMR/MLX devices snTrapChasFanOK NOTIFICATION-TYPE @@ -2724,7 +2929,7 @@ snTrapChasFanOK NOTIFICATION-TYPE "The SNMP trap that is generated when a fan operational status changed from failure to normal or change in the fan speed due to temperature variations downwards." - --#TYPE "Brocade Trap: Fan OK" + --#TYPE "Ruckus Wireless Trap: Fan OK" --#SUMMARY "Fan %d (%s) OK." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR @@ -2737,7 +2942,7 @@ snTrapTemperatureOK NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when the actual temperature reading is below the warning temperature threshold." - --#TYPE "Brocade Trap: Temperature Warning" + --#TYPE "Ruckus Wireless Trap: Temperature Warning" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY CRITICAL @@ -2750,7 +2955,7 @@ snTrapCAMOverflow NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when any CAM partition becomes full." - --#TYPE "Brocade Trap: CAM partition full" + --#TYPE "Ruckus Wireless Trap: CAM partition full" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2767,7 +2972,7 @@ snTrapOpticalMonitoringWarning NOTIFICATION-TYPE the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: Optical Monitoring Warning" + --#TYPE "Ruckus Wireless Trap: Optical Monitoring Warning" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2784,7 +2989,7 @@ snTrapOpticalMonitoringAlarm NOTIFICATION-TYPE the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: Optical Monitoring Alarm" + --#TYPE "Ruckus Wireless Trap: Optical Monitoring Alarm" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2801,7 +3006,7 @@ snTrapOpticalMonitoringError NOTIFICATION-TYPE the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: Optical Monitoring Error" + --#TYPE "Ruckus Wireless Trap: Optical Monitoring Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2812,13 +3017,13 @@ snTrapPosMonitoringWarning NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated if there is a warning during POS + "The SNMP trap that is generated if there is a warning during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: POS Monitoring Warning" + --#TYPE "Ruckus Wireless Trap: POS Monitoring Warning" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2829,13 +3034,13 @@ snTrapPosMonitoringWarning NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated if there is an alarm up/down + "The SNMP trap that is generated if there is an alarm up/down during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: POS Monitoring Alarm" + --#TYPE "Ruckus Wireless Trap: POS Monitoring Alarm" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2852,7 +3057,7 @@ snTrapPosMonitoringWarning NOTIFICATION-TYPE the cause of event. The second optional varbind, ifIndex, points to the affected interface originating this event. If an event does not have associated port, or has multiple associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: POS Monitoring Error" + --#TYPE "Ruckus Wireless Trap: POS Monitoring Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2864,7 +3069,7 @@ snTrapXfpSfpIncompatibleOptics NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated if optics is incompatible with port configuration." - --#TYPE "Brocade Trap: Optical Incompatibility Error" + --#TYPE "Ruckus Wireless Trap: Optical Incompatibility Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY ALERTS @@ -2872,14 +3077,14 @@ snTrapXfpSfpIncompatibleOptics NOTIFICATION-TYPE ::= { snTraps 1009 } -- TRAP snMplsLspUp (1010), snMplsLspDown (1011), snMplsLspChange (1012) --- are defined in snmpls.mib. These IDs are reserverd. +-- are defined in snmpls.mib. DO NOT USE THESE IDS snTrapTMLoggingStart NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated if TM logging is started by an event trigger." - --#TYPE "Brocade Trap: TM Logging Start" + --#TYPE "Ruckus Wireless Trap: TM Logging Start" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2891,7 +3096,7 @@ snTrapTMLoggingStop NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated if TM logging stopped due to storage full." - --#TYPE "Brocade Trap: TM Logging Stop" + --#TYPE "Ruckus Wireless Trap: TM Logging Stop" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2903,7 +3108,7 @@ snTrapTMLoggingRestart NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated if TM logging restarted after user clearing the log." - --#TYPE "Brocade Trap: TM Logging Restart" + --#TYPE "Ruckus Wireless Trap: TM Logging Restart" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2914,8 +3119,8 @@ snTrapXfpSfpNotFoundryOptics NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated if optics vendor is not Foundry Networks." - --#TYPE "Brocade Trap: Not Brocade Optics" + "The SNMP trap that is generated if optics vendor is not Ruckus Wireless, Inc." + --#TYPE "Ruckus Wireless Trap: Not Ruckus Wireless, Inc Optics" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2927,7 +3132,7 @@ snTrapTMRecoverySlotReset NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when TM recovery slot reset is triggered." - --#TYPE "Brocade Trap: TM recovery level II" + --#TYPE "Ruckus Wireless Trap: TM recovery level II" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -2941,45 +3146,22 @@ snTrapTMEgressDataError NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when system detects egress data errors on Traffic Manager. For e.g. Fabric Monitoring : TM Egress data errors detected on LP /TM " - --#TYPE "Brocade Trap: TM Egress Data Error" + --#TYPE "Ruckus Wireless Trap: TM Egress Data Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY MAJOR --#STATE OPERATIONAL -::= { snTraps 1020 } +::= { snTraps 1020 } -snTrapSFMLoggingRestart NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated if SFM logging restarted after user clearing the log." - --#TYPE "Brocade Trap: SFM Logging Restart" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1021 } -snTrapNotEnoughFapLinks NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when LP FAP (Fabric Adapter Processor) - has not enough links to maintain the line rate." - --#TYPE "Foundry Trap: LP FAP line Rate Change" - --#SUMMARY "%s" - --#ARGUMENTS { 1 } - --#SEVERITY NOTIFICATIONS - --#STATE OPERATIONAL - ::= { snTraps 1035 } snTrapSFMLinkDown NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when a link from LP Traffic Manager to + "The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is down. For eg. Fabric Monitoring Link Down : SFM /FE /Link , LP /TM " - --#TYPE "Brocade Trap: SFM Link Down" + --#TYPE "Ruckus Wireless Trap: SFM Link Down" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY WARNING @@ -2990,10 +3172,10 @@ snTrapSFMLinkUp NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when a link from LP Traffic Manager to + "The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is up. For eg. Fabric Monitoring Link Up : SFM /FE /Link , LP /TM " - --#TYPE "Brocade Trap: SFM Link Up" + --#TYPE "Ruckus Wireless Trap: SFM Link Up" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3007,171 +3189,19 @@ snTrapSFMAccessError NOTIFICATION-TYPE DESCRIPTION "The SNMP trap that is generated when system fails to access a SFM Fabric Element. For e.g. Fabric Monitoring : Device access failure in SFM /FE " - --#TYPE "Brocade Trap: FE Access Error" + --#TYPE "Ruckus Wireless Trap: FE Access Error" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY MAJOR --#STATE OPERATIONAL -::= { snTraps 1102 } - -snTrapSFMStatusChange NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, snAgentBrdModuleStatus, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP notification that is generated when there is a change in the operational state - of the Switch Fabric Module (SFM). For example, - System: Health Monitoring: SFM powered off due to failure detection" - --#TYPE "Brocade Trap: SFM status changed" - --#SUMMARY "%s." - --#ARGUMENTS { 2 } - --#SEVERITY MAJOR - --#STATE OPERATIONAL -::= { snTraps 1103 } - -snTrapLPFabricStatusChange NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, snAgentBrdModuleStatus, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "Health Monitoring: LP Fabric status change." - --#TYPE "Brocade Trap: TM status changed" - --#SUMMARY "%s." - --#ARGUMENTS { 2 } - --#SEVERITY MAJOR - --#STATE OPERATIONAL -::= { snTraps 1104 } - -snTrapModuleNPLockupIndication NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, brcdNPIndex, brcdNPLockupRecoveryCount } - STATUS current - DESCRIPTION - "The SNMP notification that is generated for - the module's NP health monitoring to indicate - that a lockup and recovery have occurred. - Expressed in number of times in the past 1 hour " - --#TYPE "Brocade Trap: Lockup and recovery indication" - --#SUMMARY "System: Health Monitoring: Module %d, NP ID %d: CAM search error detected and recovered %d times." - --#ARGUMENTS { 0,1, 2 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1105 } - -snTrapModuleNPLockupThresholdExceeded NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex } - STATUS current - DESCRIPTION - "The SNMP notification that is generated for - the module's NP health monitoring when the - threshold for lockup and recovery of any NP - within the module have been reached. - The threshold value is 5 times in the past 1 hour." - --#TYPE "Brocade Trap: Lockup and recovery threshold exceeded - --#SUMMARY "System: Health Monitoring: Module %d : CAM search error exceed threshold." - --#ARGUMENTS { 0 } - --#SEVERITY CRITICAL - --#STATE OPERATIONAL -::= { snTraps 1106 } - -snTrapSFMAutoTuneStart NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning starts on the fabric side" - --#TYPE "Brocade Trap: Auto Tuning Start" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1107 } - -snTrapSFMAutoTuneFails NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning fails on the fabric side " - --#TYPE "Brocade Trap: Auto Tune Failure" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1108 } - -snTrapSFMAutoTuneComplete NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning completes on the fabric side" - --#TYPE "Brocade Trap: Auto tune Completed" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1109 } - -snTrapTMAutoTuneStart NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning starts on the TM side" - --#TYPE "Brocade Trap: Auto Tuning Start" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1110 } - -snTrapTMAutoTuneFails NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning fails on the TM side " - --#TYPE "Brocade Trap: Auto Tune Failure" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1111 } - -snTrapTMAutoTuneComplete NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when Auto tuning completes on the TM side" - --#TYPE "Brocade Trap: Auto tune Completed" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1112 } - -snTrapNPILKNCRCError NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when packet drops are observed in 2x100G ports because of Interlaken CRC errors" - --#TYPE "Brocade Trap: 2x100 NP Interlaken CRC Error Detected" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1113 } -snTrapARPMACMovement NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the MAC address associated with a host IP is changed." - --#TYPE "Brocade Trap: ARP MAC Movement Detected" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1114 } +::= { snTraps 1102 } snTrapChassisFanSpeedLow NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when all chassis fans change to low speed." - --#TYPE "Brocade Trap: Chassis Fans Speed Low" + --#TYPE "Ruckus Wireless Trap: Chassis Fans Speed Low" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3183,7 +3213,7 @@ snTrapChassisFanSpeedMedium NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when all chassis fans change to medium speed." - --#TYPE "Brocade Trap: Chassis Fans Speed Medium" + --#TYPE "Ruckus Wireless Trap: Chassis Fans Speed Medium" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3195,7 +3225,7 @@ snTrapChassisFanSpeedMedHigh NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when all chassis fans change to medium high speed." - --#TYPE "Brocade Trap: Chassis Fans Speed Medium High" + --#TYPE "Ruckus Wireless Trap: Chassis Fans Speed Medium High" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3207,21 +3237,19 @@ snTrapChassisFanSpeedHigh NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when all chassis fans change to high speed." - --#TYPE "Brocade Trap: Chassis Fans Speed High" + --#TYPE "Ruckus Wireless Trap: Chassis Fans Speed High" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { snTraps 1203 } --- TRAP IDs 1204 and 1205 are reserved for fdryTrapLagDeployed (1024) --- and fdryTrapLagUndeployed(1025) traps. snTrapFIPSModeEnable NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } + OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated when FIPS mode is enabled." - --#TYPE "Brocade Trap: FIPS mode enabled by from console" + --#TYPE "Ruckus Wireless Trap: FIPS mode enabled by from console" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3232,8 +3260,8 @@ snTrapFIPSModeDisable NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION - "The SNMP trap that is generated when FIPS mode is disabled." - --#TYPE "Brocade Trap: FIPS mode disabled by from console" + "The SNMP trap that is generated when FIPS mode is disabled.The zeroization of host keys and shared secret keys is done after this trap is sent." + --#TYPE "Ruckus Wireless Trap: FIPS mode disabled by from console" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3246,7 +3274,7 @@ snTrapFIPSHostZeroized NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when host keys are zeroized in FIPS mode" - --#TYPE "Brocade Trap: Host keys have been zeroized by from console." + --#TYPE "Ruckus Wireless Trap: Host keys have been zeroized by from console." --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3258,19 +3286,20 @@ snTrapFIPSSharedSecretZeroized NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when shared secret are zeroized in FIPS mode" - --#TYPE "Brocade Trap: Shared Secrets have been zeroized by from console." + --#TYPE "Ruckus Wireless Trap: Shared Secrets have been zeroized by from console." --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { snTraps 1210 } + snTrapFIPSPOSTStatus NOTIFICATION-TYPE OBJECTS { snAgGblTrapMessage } STATUS current DESCRIPTION "The SNMP trap that is generated after POST." - --#TYPE "Brocade Trap: FIPS POST status =< SUCCESS | FAIL>" + --#TYPE "Ruckus Wireless Trap: FIPS POST status =< SUCCESS | FAIL>" --#SUMMARY "%s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL @@ -3282,160 +3311,11 @@ snTrapFIPSCryptoModuleFailure NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated on cryptographic module failure." - --#TYPE "Brocade Trap: FIPS Cryptographic Module Failure" + --#TYPE "Ruckus Wireless Trap: FIPS Cryptographic Module Failure" --#SUMMARY "%s." --#ARGUMENTS { 0 } - --#SEVERITY CRITICAL + --#SEVERITY CRITICAL --#STATE OPERATIONAL ::= { snTraps 1212 } -snTrapLicense2PortNotSupported NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when a 2 port license cannot be applied due to hardware limitation." - --#TYPE "Brocade Trap: License not supported" - --#SUMMARY "%s" - --#ARGUMENTS { 0 } - --#SEVERITY NOTIFICATIONS - --#STATE OPERATIONAL - ::= { snTraps 1213 } - -snTrapOpticalMonitoringOK NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage, ifIndex } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when an interface transitions from an error to normal state because - the alarms/warnings are below the threshold. snTrapOpticalMonitoringError would have been earlier generated - when the interface transitioned to the error state. The first varbind, snAgGblTrapMessage, will have a detailed message on - the cause of event. The second varbind, ifIndex, points to the affected interface - originating this event. If an event does not have associated port, or has multiple - associated ports, then ifIndex will have maximum value 0x7ffffff." - --#TYPE "Brocade Trap: Optical Monitoring OK" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1214 } - -snTrapSFMAccessOK NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when system can successfully access an SFM Fabric Element. - snTrapSFMAccessError would have been generated when the system failed to access the FE. - For e.g. Fabric Monitoring : Device SFM /FE is OK to access." - --#TYPE "Brocade Trap: FE Access OK" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL -::= { snTraps 1215 } - -snTrapUpgradeSingleCmdStart NOTIFICATION-TYPE - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the single-command package - upgrade has started. This happens after a successful download - and validation of manifest file and before the first image download - takes place." - --#TYPE "Brocade Trap: Single-command package upgrade started." - --#SUMMARY "Single command package upgrade started." - --#ARGUMENTS {} - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1216 } - -snTrapUpgradeSingleCmdDone NOTIFICATION-TYPE - OBJECTS {snAgGblTrapMessage} - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the single-command package - upgrade completed, or partially completed. The table - brcdSwPackageLoadResultTable lists the result of the upgrade." - --#TYPE "Brocade Trap: Single-command package upgrade completed." - --#SUMMARY "Single command package upgrade completed %s." - --#ARGUMENTS {0} - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1217 } - -snTrapAutoUpgradeStart NOTIFICATION-TYPE - OBJECTS {snAgentBrdIndex } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when an auto-upgrade on a line card - has started." - --#TYPE "Brocade Trap: Auto-upgrade of interface module started." - --#SUMMARY "Auto-upgrade of interface module %d started." - --#ARGUMENTS {0} - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1218 } - -snTrapAutoUpgradeDone NOTIFICATION-TYPE - OBJECTS {snAgentBrdIndex, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the auto-upgrade of interface - module completed." - --#TYPE "Brocade Trap: Auto-upgrade of interface card competed." - --#SUMMARY "Auto-upgrade of module %d completed %s." - --#ARGUMENTS {0, 1} - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1219 } - -snTrapTcamParityError NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the TCAM parity errors are - detected on LP." - --#TYPE "Brocade Trap: TCAM parity errors detected on LP" - --#SUMMARY "TCAM parity errors are detected on LP %d." - --#ARGUMENTS { 0 } - --#SEVERITY ALERTS - --#STATE OPERATIONAL - ::= { snTraps 1220 } - -snTrapLPResetOnTcamError NOTIFICATION-TYPE - OBJECTS { snAgentBrdIndex, snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when the LP reset due to TCAM parity errors crossing the threshold - or TCAM integrity check failure." - --#TYPE "Brocade Trap: LP reset due to TCAM parity errors crossing the threshold or TCAM integrity check failure" - --#SUMMARY "LP %d reset due to TCAM parity errors crossing the threshold or TCAM integrity check failure." - --#ARGUMENTS { 0 } - --#SEVERITY CRITICAL - --#STATE OPERATIONAL - ::= { snTraps 1221 } - -snTrapSTPRootGuardViolation NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when STP Root Guard Violation occurs on a port. - Format: STP: Root-protect port /, VLAN inconsistent (Received superior BPDU)" - --#TYPE "Foundry Trap: STP Root Guard Violation" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1230 } - -snTrapRSTPRootGuardViolation NOTIFICATION-TYPE - OBJECTS { snAgGblTrapMessage } - STATUS current - DESCRIPTION - "The SNMP trap that is generated when STP Root Guard Violation occurs on a port. - Format: RSTP: Root-protect port /, VLAN inconsistent (Received superior BPDU)" - --#TYPE "Foundry Trap: RSTP Root Guard Violation" - --#SUMMARY "%s." - --#ARGUMENTS { 0 } - --#SEVERITY INFORMATIONAL - --#STATE OPERATIONAL - ::= { snTraps 1231 } - END diff --git a/foundry/FOUNDRY-SN-OSPF-GROUP-MIB.mib b/foundry/FOUNDRY-SN-OSPF-GROUP-MIB.mib index b42125d6d..87d4365bd 100644 --- a/foundry/FOUNDRY-SN-OSPF-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-OSPF-GROUP-MIB.mib @@ -1,50 +1,51 @@ FOUNDRY-SN-OSPF-GROUP-MIB DEFINITIONS ::= BEGIN IMPORTS - MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, IpAddress,Integer32 + MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, IpAddress,Integer32 FROM SNMPv2-SMI router FROM FOUNDRY-SN-ROOT-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC; - + snOspf MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" - ::= {router 4} + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" + ::= {router 4} -- Textual Conventions - AreaID::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + AreaID::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " The Area ID, in OSPF, has the same format as an IP Address, but has the function of defining a summarization point for @@ -52,43 +53,43 @@ snOspf MODULE-IDENTITY " SYNTAX IpAddress - RouterID::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + RouterID::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " The Router ID, in OSPF, has the same format as an IP Address, - but identifies the router independent of its IP Address. + but identifies the router independent of its IP Address. " SYNTAX IpAddress - Metric::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + Metric::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " The OSPF Metric is defined as an unsigned value in the range 0..'FFFF'h " SYNTAX INTEGER (0..65535) - - BigMetric::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + + BigMetric::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " 0..'FFFFFF'h " SYNTAX INTEGER (0..16777215) - TruthVal::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + TruthVal::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " Boolean Values " SYNTAX INTEGER { false (0), true (1) } - RtrStatus::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + RtrStatus::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " RtrStatus Values " @@ -96,59 +97,59 @@ snOspf MODULE-IDENTITY -- Time Durations measured in seconds - PositiveInteger::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + PositiveInteger::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " 0..'7FFFFFFF'h " SYNTAX INTEGER (0..2147483647) - - HelloRange::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + + HelloRange::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " 1..'FFFF'h " SYNTAX INTEGER (1..65535) - - UpToMaxAge::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + + UpToMaxAge::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " " SYNTAX INTEGER (0..3600) - DesignatedRouterPriority::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + DesignatedRouterPriority::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " The range of ifIndex, i.e. (1..ifNumber) - Potential Priorities for the Designated Router Election + Potential Priorities for the Designated Router Election " SYNTAX INTEGER (0..255) - TOSType::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION + TOSType::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION " Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the Router Requirements Document: - + Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB - + +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ - + IP TOS IP TOS Field Policy Field Policy - + Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 @@ -158,8 +159,8 @@ snOspf MODULE-IDENTITY 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 - - The remaining values are left for future definition. + + The remaining values are left for future definition. " SYNTAX INTEGER (0..30) @@ -181,8 +182,8 @@ snOspfIfStatus OBJECT IDENTIFIER ::= { snOspf 12 } snOspfVirtIfStatus OBJECT IDENTIFIER ::= { snOspf 13 } snOspfRoutingInfo OBJECT IDENTIFIER ::= { snOspf 14 } snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } - - + + -- Section 1: OSPF General Variables @@ -234,7 +235,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "The Redistribution status of OSPF in the router. The - value 'enabled' denotes that the OSPF Redistribution is + value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router." ::= { snOspfGen 4 } @@ -242,7 +243,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfDefaultOspfMetricValue OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The metric of using a default OSPF Metric value on this route." ::= { snOspfGen 5 } @@ -299,25 +300,23 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } type2(2) } MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION - "type1: For External Type 1 (comparable value) the - intra-area and inter-area routes, + "type1: For External Type 1 (comparable value) the + intra-area and inter-area routes, it is an OSPF metric plus the External Metric. - type2: For external Type 2 (non-comparable value) routes, + type2: For external Type 2 (non-comparable value) routes, it is the external metric." ::= { snOspfGen 10 } snOspfExtLsdbLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the - link-state database. If the value is -1, then - there is no limit. - + link-state database. When the number of non-default AS-external-LSAs in a router's link-state database reaches @@ -334,7 +333,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfExitOverflowInterval OBJECT-TYPE SYNTAX INTEGER (0..86400) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The number of seconds that, after entering OverflowState, a router will attempt to leave @@ -346,7 +345,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfRfc1583Compatibility OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -355,7 +354,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } "This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 - disabled(0).......disable RFC1583 compatibility and compatible to RFC2178." + disabled(0).......disable RFC1583 compatibility and compatible to RFC2178." ::= { snOspfGen 13 } snOspfRouterIdFormat OBJECT-TYPE @@ -367,7 +366,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - RouterId is represented as IP Address or + RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -443,9 +442,9 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } Integer32, snOspfStubMetric BigMetric, - snOspfAreaRowStatus + snOspfAreaRowStatus INTEGER, - snOspfAreaIdFormat + snOspfAreaIdFormat INTEGER } @@ -466,7 +465,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "The area's support for importing AS external link- - state advertisements. + state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type" @@ -482,11 +481,11 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "The metric value applied at the default type of - service(ospfMetric). By default, this equals the - least metric at the type of service among the + service(ospfMetric). By default, this equals the + least metric at the type of service among the interfaces to other areas. This Object exist if - only if the value of snOspfAreaSummary is - snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT + only if the value of snOspfAreaSummary is + snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME." ::= { snOspfAreaEntry 3 } @@ -530,7 +529,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -585,7 +584,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } IpAddress, snOspfAreaRangeRowStatus INTEGER, - snOspfAreaRangeAreaIdFormat + snOspfAreaRangeAreaIdFormat INTEGER } @@ -660,7 +659,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -669,7 +668,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } - + -- Section 4: OSPF Interface Configuration Table @@ -725,15 +724,15 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } OCTET STRING, snOspfIfMetricValue INTEGER, - snOspfIfRowStatus - INTEGER, + snOspfIfRowStatus + INTEGER, snOspfIfMd5AuthKeyId INTEGER, snOspfIfMd5AuthKey OCTET STRING, snOspfIfMd5ActivationWaitTime INTEGER, - snOspfIfAreaIdFormat + snOspfIfAreaIdFormat INTEGER, snOspfIfPassiveMode INTEGER, @@ -920,7 +919,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snOspfIfEntry 12 } - + snOspfIfMd5AuthKeyId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write @@ -928,9 +927,9 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be - (1 to 255). This field identifies the algorithm and secret - key used to create the message digest appended to the OSPF - packet. Key Identifiers are unique per-interface + (1 to 255). This field identifies the algorithm and secret + key used to create the message digest appended to the OSPF + packet. Key Identifiers are unique per-interface (or equivalently, per-subnet)." ::= { snOspfIfEntry 13 } @@ -941,7 +940,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS deprecated DESCRIPTION "The MD5 Authentication Key. If the Area's Authorization - Type is md5, and the key length is shorter than 16 octets, + Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero." @@ -966,7 +965,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS deprecated DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -1072,15 +1071,15 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } OCTET STRING, snOspfIf2MetricValue INTEGER, - snOspfIf2RowStatus - INTEGER, + snOspfIf2RowStatus + INTEGER, snOspfIf2Md5AuthKeyId INTEGER, snOspfIf2Md5AuthKey OCTET STRING, snOspfIf2Md5ActivationWaitTime INTEGER, - snOspfIf2AreaIdFormat + snOspfIf2AreaIdFormat INTEGER, snOspfIf2PassiveMode INTEGER, @@ -1235,7 +1234,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfIf2MetricValue OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The metric of using this type of service on this interface. The default value of the TOS 0 @@ -1271,7 +1270,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snOspfIf2Entry 12 } - + snOspfIf2Md5AuthKeyId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write @@ -1279,9 +1278,9 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be - (1 to 255). This field identifies the algorithm and secret - key used to create the message digest appended to the OSPF - packet. Key Identifiers are unique per-interface + (1 to 255). This field identifies the algorithm and secret + key used to create the message digest appended to the OSPF + packet. Key Identifiers are unique per-interface (or equivalently, per-subnet)." ::= { snOspfIf2Entry 13 } @@ -1292,7 +1291,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "The MD5 Authentication Key. If the Area's Authorization - Type is md5, and the key length is shorter than 16 octets, + Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero." @@ -1302,7 +1301,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfIf2Md5ActivationWaitTime OBJECT-TYPE SYNTAX INTEGER (0..14400) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours)." @@ -1317,7 +1316,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -1437,14 +1436,14 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfVirtIfAuthKey OCTET STRING, snOspfVirtIfRowStatus - INTEGER, + INTEGER, snOspfVirtIfMd5AuthKeyId INTEGER, snOspfVirtIfMd5AuthKey OCTET STRING, snOspfVirtIfMd5ActivationWaitTime INTEGER, - snOspfVirtIfAreaIdFormat + snOspfVirtIfAreaIdFormat INTEGER } @@ -1531,7 +1530,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } ::= { snOspfVirtIfEntry 7 } snOspfVirtIfAuthKey OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..8)) + SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -1574,7 +1573,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" - ::= { snOspfVirtIfEntry 9 } + ::= { snOspfVirtIfEntry 9 } snOspfVirtIfMd5AuthKeyId OBJECT-TYPE SYNTAX INTEGER (0..255) @@ -1583,9 +1582,9 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be - (1 to 255). This field identifies the algorithm and secret - key used to create the message digest appended to the OSPF - packet. Key Identifiers are unique per-interface + (1 to 255). This field identifies the algorithm and secret + key used to create the message digest appended to the OSPF + packet. Key Identifiers are unique per-interface (or equivalently, per-subnet)." ::= { snOspfVirtIfEntry 10 } @@ -1596,7 +1595,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "The MD5 Authentication Key. If the Area's Authorization - Type is md5, and the key length is shorter than 16 octets, + Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String @@ -1611,7 +1610,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfVirtIfMd5ActivationWaitTime OBJECT-TYPE SYNTAX INTEGER (0..14400) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours)." @@ -1627,7 +1626,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -1661,7 +1660,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS not-accessible STATUS current DESCRIPTION - "The OSPF Redistribution Entry specifies a particular RIP + "The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain." INDEX { snOspfRedisIndex } ::= { snOspfRedisTable 1 } @@ -1696,7 +1695,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-only STATUS current DESCRIPTION - "The destination IP address that associates with + "The destination IP address that associates with this particular route." ::= { snOspfRedisEntry 1 } @@ -1705,7 +1704,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The destination IP address that associates with + "The destination IP address that associates with this particular route." ::= { snOspfRedisEntry 2 } @@ -1725,9 +1724,9 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The action to be taken if the route match this entry. + "The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF - Domain. + Domain. import(1): - the route is imported into OSPF Domain as external type 2 route." ::= { snOspfRedisEntry 4 } @@ -1744,7 +1743,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The imported routes into OSPF domain is set in the following: + "The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. @@ -1761,10 +1760,10 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The value indicates to which the route metric should match: - disabled(0): - the route metric does NOT match the + "The value indicates to which the route metric should match: + disabled(0): - the route metric does NOT match the OSPF metric field. - enabled(1): - the route metric matches the OSPF + enabled(1): - the route metric matches the OSPF metric field." ::= { snOspfRedisEntry 6 } @@ -1772,7 +1771,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfRedisOspfMetricValue OBJECT-TYPE SYNTAX Metric MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The metric of using OSPF Metric value on this route." ::= { snOspfRedisEntry 7 } @@ -1786,10 +1785,10 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } MAX-ACCESS read-write STATUS current DESCRIPTION - "The value indicates to which the route metric should match: - disabled(0): - the route metric does NOT match the + "The value indicates to which the route metric should match: + disabled(0): - the route metric does NOT match the RIP metric field. - enabled(1): - the route metric matches the RIP + enabled(1): - the route metric matches the RIP metric field." ::= { snOspfRedisEntry 8 } @@ -1797,7 +1796,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } snOspfRedisRipMetricValue OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write - STATUS current + STATUS current DESCRIPTION "The metric of using RIP Metric value (1 to 15 hops) on this route." ::= { snOspfRedisEntry 9 } @@ -1895,7 +1894,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The table entry index of this neighbor." ::= { snOspfNbrEntry 1 } - + snOspfNbrPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only @@ -1903,7 +1902,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The physical port of this neighbor." ::= { snOspfNbrEntry 2 } - + snOspfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress @@ -1921,7 +1920,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } DESCRIPTION "The neighbor index of each port and each IP address." ::= { snOspfNbrEntry 4 } - + snOspfNbrRtrId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only @@ -2067,7 +2066,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } Counter32, snOspfVirtNbrLSRetransQLen Gauge32, - snOspfVirtNbrAreaIdFormat + snOspfVirtNbrAreaIdFormat INTEGER } @@ -2158,7 +2157,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -2211,7 +2210,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } Integer32, snOspfLsdbAdvertisement OCTET STRING, - snOspfLsdbAreaIdFormat + snOspfLsdbAreaIdFormat INTEGER } @@ -2349,7 +2348,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -2392,7 +2391,7 @@ snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 } SnOspfExtLsdbEntry ::= SEQUENCE { - snOspfExtLsdbEntryIndex + snOspfExtLsdbEntryIndex Integer32, snOspfExtLsdbType INTEGER, @@ -2558,9 +2557,9 @@ SnOspfExtLsdbEntry ::= SnOspfAreaStatusEntry ::= SEQUENCE { - snOspfAreaStatusEntryIndex + snOspfAreaStatusEntryIndex Integer32, - snOspfAreaStatusAreaId + snOspfAreaStatusAreaId AreaID, snOspfAreaStatusImportASExtern Integer32, @@ -2576,7 +2575,7 @@ SnOspfExtLsdbEntry ::= Gauge32, snOspfAreaStatusLSACksumSum Integer32, - snOspfAreaStatusAreaIdFormat + snOspfAreaStatusAreaIdFormat INTEGER } @@ -2618,11 +2617,11 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "The metric value applied at the default type of - service(ospfMetric). By default, this equals the - least metric at the type of service among the + service(ospfMetric). By default, this equals the + least metric at the type of service among the interfaces to other areas. This Object exist if - only if the value of snOspfAreaSummary is - snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT + only if the value of snOspfAreaSummary is + snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME." ::= { snOspfAreaStatusEntry 4 } @@ -2695,13 +2694,13 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address." ::= { snOspfAreaStatusEntry 10 } - + -- Section 12: OSPF Interface Status Table @@ -2731,7 +2730,7 @@ SnOspfExtLsdbEntry ::= SnOspfIfStatusEntry ::= SEQUENCE { - snOspfIfStatusEntryIndex + snOspfIfStatusEntryIndex Integer32, snOspfIfStatusPort Integer32, @@ -2773,7 +2772,7 @@ SnOspfExtLsdbEntry ::= OCTET STRING, snOspfIfStatusMd5ActivationWaitTime INTEGER, - snOspfIfStatusAreaIdFormat + snOspfIfStatusAreaIdFormat INTEGER } @@ -2994,7 +2993,7 @@ SnOspfExtLsdbEntry ::= snOspfIfStatusMetricValue OBJECT-TYPE SYNTAX Metric MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION "The metric of using this type of service on this interface. The default value of the TOS 0 @@ -3008,9 +3007,9 @@ SnOspfExtLsdbEntry ::= DESCRIPTION "The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be - (1 to 255). This field identifies the algorithm and secret - key used to create the message digest appended to the OSPF - packet. Key Identifiers are unique per-interface + (1 to 255). This field identifies the algorithm and secret + key used to create the message digest appended to the OSPF + packet. Key Identifiers are unique per-interface (or equivalently, per-subnet)." ::= { snOspfIfStatusEntry 19 } @@ -3021,7 +3020,7 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "The MD5 Authentication Key. If the Area's Authorization - Type is md5, and the key length is shorter than 16 octets, + Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero." @@ -3031,7 +3030,7 @@ SnOspfExtLsdbEntry ::= snOspfIfStatusMd5ActivationWaitTime OBJECT-TYPE SYNTAX INTEGER (0..14400) MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION "The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours)." @@ -3046,7 +3045,7 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -3057,7 +3056,7 @@ SnOspfExtLsdbEntry ::= -- Section 13: OSPF Virtual Interface Status Table -- The Virtual Interface Status Table describes the virtual --- links status data. +-- links status data. @@ -3082,7 +3081,7 @@ SnOspfExtLsdbEntry ::= SnOspfVirtIfStatusEntry ::= SEQUENCE { - snOspfVirtIfStatusEntryIndex + snOspfVirtIfStatusEntryIndex Integer32, snOspfVirtIfStatusAreaID AreaID, @@ -3110,7 +3109,7 @@ SnOspfExtLsdbEntry ::= OCTET STRING, snOspfVirtIfStatusMd5ActivationWaitTime INTEGER, - snOspfVirtIfStatusAreaIdFormat + snOspfVirtIfStatusAreaIdFormat INTEGER } @@ -3207,7 +3206,7 @@ SnOspfExtLsdbEntry ::= MAX-ACCESS read-only STATUS current DESCRIPTION - "The number of state changes or error events on + "The number of state changes or error events on this Virtual Link." ::= { snOspfVirtIfStatusEntry 9 } @@ -3229,7 +3228,7 @@ SnOspfExtLsdbEntry ::= ::= { snOspfVirtIfStatusEntry 10 } snOspfVirtIfStatusAuthKey OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..8)) + SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION @@ -3251,9 +3250,9 @@ SnOspfExtLsdbEntry ::= DESCRIPTION "The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be - (1 to 255). This field identifies the algorithm and secret - key used to create the message digest appended to the OSPF - packet. Key Identifiers are unique per-interface + (1 to 255). This field identifies the algorithm and secret + key used to create the message digest appended to the OSPF + packet. Key Identifiers are unique per-interface (or equivalently, per-subnet)." ::= { snOspfVirtIfStatusEntry 12 } @@ -3264,7 +3263,7 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "The MD5 Authentication Key. If the Area's Authorization - Type is md5, and the key length is shorter than 16 octets, + Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String @@ -3279,7 +3278,7 @@ SnOspfExtLsdbEntry ::= snOspfVirtIfStatusMd5ActivationWaitTime OBJECT-TYPE SYNTAX INTEGER (0..14400) MAX-ACCESS read-only - STATUS current + STATUS current DESCRIPTION "The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours)." @@ -3295,7 +3294,7 @@ SnOspfExtLsdbEntry ::= STATUS current DESCRIPTION "This object is used to specify whether - AreaId is represented as IP Address or + AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. @@ -3306,7 +3305,7 @@ SnOspfExtLsdbEntry ::= -- Section 14: OSPF Routing Information Table -- The OSPF Routing Information Table describes the OSPF ABR/ASBR --- routing information. +-- routing information. @@ -3329,7 +3328,7 @@ SnOspfExtLsdbEntry ::= SnOspfRoutingInfoEntry ::= SEQUENCE { - snOspfRoutingInfoIndex + snOspfRoutingInfoIndex Integer32, snOspfRoutingInfoRouterID RouterID, @@ -3355,7 +3354,7 @@ SnOspfExtLsdbEntry ::= MAX-ACCESS read-only STATUS current DESCRIPTION - "The Router ID of the destination router." + "The Router ID of the destination router." ::= { snOspfRoutingInfoEntry 2 } snOspfRoutingInfoRouterType OBJECT-TYPE @@ -3460,8 +3459,8 @@ SnOspfExtLsdbEntry ::= MAX-ACCESS read-write STATUS current DESCRIPTION - "Indicates if the generation of any OSPF traps is permitted on the router. - The value 'enabled' denotes that the OSPF Traps can be generated by the + "Indicates if the generation of any OSPF traps is permitted on the router. + The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps." diff --git a/foundry/FOUNDRY-SN-ROOT-MIB.mib b/foundry/FOUNDRY-SN-ROOT-MIB.mib index 21de3acac..574378a14 100644 --- a/foundry/FOUNDRY-SN-ROOT-MIB.mib +++ b/foundry/FOUNDRY-SN-ROOT-MIB.mib @@ -2,50 +2,54 @@ FOUNDRY-SN-ROOT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,enterprises - FROM SNMPv2-SMI; - + FROM SNMPv2-SMI; + foundry MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089 + USA + Email: support@ruckuswireless.com + Phone: +1 (650) 265-4200 + URL: www.ruckuswireless.com + " + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { enterprises 1991} -snTraps OBJECT IDENTIFIER ::= { foundry 0 } +--some OIDs are commented here due to the duplicate OID issue for certain SNMP tools (FI-247705) +--snTraps OBJECT IDENTIFIER ::= { foundry 0 } products OBJECT IDENTIFIER ::= { foundry 1 } vendors OBJECT IDENTIFIER ::= { foundry 2 } switch OBJECT IDENTIFIER ::= { products 1 } snChassis OBJECT IDENTIFIER ::= { switch 1 } snAgentSys OBJECT IDENTIFIER ::= { switch 2 } - snSwitch OBJECT IDENTIFIER ::= { switch 3 } - snL4 OBJECT IDENTIFIER ::= { switch 4 } + --snSwitch OBJECT IDENTIFIER ::= { switch 3 } + --snL4 OBJECT IDENTIFIER ::= { switch 4 } snStack OBJECT IDENTIFIER ::= { switch 5 } snSci OBJECT IDENTIFIER ::= { switch 6 } fdrySntp OBJECT IDENTIFIER ::= { switch 7 } @@ -60,22 +64,22 @@ vendors OBJECT IDENTIFIER ::= { foundry 2 } router OBJECT IDENTIFIER ::= { products 2 } snIpx OBJECT IDENTIFIER ::= { router 1 } - snIp OBJECT IDENTIFIER ::= { router 2 } + --snIp OBJECT IDENTIFIER ::= { router 2 } snRip OBJECT IDENTIFIER ::= { router 3 } - snOspf OBJECT IDENTIFIER ::= { router 4 } + --snOspf OBJECT IDENTIFIER ::= { router 4 } snDvmrp OBJECT IDENTIFIER ::= { router 5 } snIgmp OBJECT IDENTIFIER ::= { router 6 } snFsrp OBJECT IDENTIFIER ::= { router 7 } snGblRt OBJECT IDENTIFIER ::= { router 8 } snPim OBJECT IDENTIFIER ::= { router 9 } snAppleTalk OBJECT IDENTIFIER ::= { router 10 } - snBgp4 OBJECT IDENTIFIER ::= { router 11 } - snVrrp OBJECT IDENTIFIER ::= { router 12 } + --snBgp4 OBJECT IDENTIFIER ::= { router 11 } + --snVrrp OBJECT IDENTIFIER ::= { router 12 } snLoopbackIf OBJECT IDENTIFIER ::= { router 13 } snPOS OBJECT IDENTIFIER ::= { router 14 } snMpls OBJECT IDENTIFIER ::= { router 15 } fdryAcl OBJECT IDENTIFIER ::= { router 16 } - fdryIpv6 OBJECT IDENTIFIER ::= { router 17 } + fdryIpv6 OBJECT IDENTIFIER ::= { router 17 } registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values @@ -190,19 +194,19 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFES9604Switch OBJECT IDENTIFIER ::= { snFES9604 1 } -- FES9604 switch snFES9604Router OBJECT IDENTIFIER ::= { snFES9604 2 } -- FES9604 router - snFES12GCF OBJECT IDENTIFIER ::= { registration 28 } -- FastIron Edge Switch(FES) 12GCF - snFES12GCFSwitch OBJECT IDENTIFIER ::= { snFES12GCF 1 } -- snFES12GCF switch + snFES12GCF OBJECT IDENTIFIER ::= { registration 28 } -- FastIron Edge Switch(FES) 12GCF + snFES12GCFSwitch OBJECT IDENTIFIER ::= { snFES12GCF 1 } -- snFES12GCF switch snFES12GCFRouter OBJECT IDENTIFIER ::= { snFES12GCF 2 } -- snFES12GCF router - snFES2402POE OBJECT IDENTIFIER ::= { registration 29 } -- FastIron Edge Switch(FES) 2402 POE - snFES2402POESwitch OBJECT IDENTIFIER ::= { snFES2402POE 1 } -- snFES2402POE switch + snFES2402POE OBJECT IDENTIFIER ::= { registration 29 } -- FastIron Edge Switch(FES) 2402 POE + snFES2402POESwitch OBJECT IDENTIFIER ::= { snFES2402POE 1 } -- snFES2402POE switch snFES2402POERouter OBJECT IDENTIFIER ::= { snFES2402POE 2 } -- snFES2402POE router - snFES4802POE OBJECT IDENTIFIER ::= { registration 30 } -- FastIron Edge Switch (FES) 4802 POE - snFES4802POESwitch OBJECT IDENTIFIER ::= { snFES4802POE 1 } -- snFES4802POE switch + snFES4802POE OBJECT IDENTIFIER ::= { registration 30 } -- FastIron Edge Switch (FES) 4802 POE + snFES4802POESwitch OBJECT IDENTIFIER ::= { snFES4802POE 1 } -- snFES4802POE switch snFES4802POERouter OBJECT IDENTIFIER ::= { snFES4802POE 2 } -- snFES4802POE router - snNetIron4802 OBJECT IDENTIFIER ::= { registration 31 } -- NetIron 4802 family + snNetIron4802 OBJECT IDENTIFIER ::= { registration 31 } -- NetIron 4802 family snNI4802Switch OBJECT IDENTIFIER ::= { snNetIron4802 1 } -- NetIron 4802 switch snNI4802Router OBJECT IDENTIFIER ::= { snNetIron4802 2 } -- NetIron 4802 router @@ -623,7 +627,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronSuperXPremRouter OBJECT IDENTIFIER ::= { snFastIronSuperXPrem 2 } -- FastIron SuperX Premium Router snFastIronSuperXPremBaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperXPrem 3 } -- FastIron SuperX Premium Base L3 Switch - snFastIronSuperX800 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 3 } -- FastIron SuperX 800 + snFastIronSuperX800 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 3 } -- FastIron SuperX 800 snFastIronSuperX800Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800 1 } -- FastIron SuperX 800 Switch snFastIronSuperX800Router OBJECT IDENTIFIER ::= { snFastIronSuperX800 2 } -- FastIron SuperX 800 Router snFastIronSuperX800BaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800 3 } -- FastIron SuperX 800 Base L3 Switch @@ -632,7 +636,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronSuperX800PremRouter OBJECT IDENTIFIER ::= { snFastIronSuperX800Prem 2 } -- FastIron SuperX 800 Premium Router snFastIronSuperX800PremBaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800Prem 3 } -- FastIron SuperX 800 Premium Base L3 Switch - snFastIronSuperX1600 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 5 } -- FastIron SuperX 1600 + snFastIronSuperX1600 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 5 } -- FastIron SuperX 1600 snFastIronSuperX1600Switch OBJECT IDENTIFIER ::= { snFastIronSuperX1600 1 } -- FastIron SuperX 1600 Switch snFastIronSuperX1600Router OBJECT IDENTIFIER ::= { snFastIronSuperX1600 2 } -- FastIron SuperX 1600 Router snFastIronSuperX1600BaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX1600 3 } -- FastIron SuperX 1600 Base L3 Switch @@ -641,7 +645,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronSuperX1600PremRouter OBJECT IDENTIFIER ::= { snFastIronSuperX1600Prem 2 } -- FastIron SuperX 1600 Premium Router snFastIronSuperX1600PremBaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX1600Prem 3 } -- FastIron SuperX 1600 Premium Base L3 Switch - snFastIronSuperXV6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 7 } -- FastIron SuperX V6 + snFastIronSuperXV6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 7 } -- FastIron SuperX V6 snFastIronSuperXV6Switch OBJECT IDENTIFIER ::= { snFastIronSuperXV6 1 } -- FastIron SuperX V6 Switch snFastIronSuperXV6Router OBJECT IDENTIFIER ::= { snFastIronSuperXV6 2 } -- FastIron SuperX V6- Ipv4 Router snFastIronSuperXV6BaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperXV6 3 } -- FastIron SuperX V6 Base L3 Switch @@ -651,7 +655,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronSuperXV6PremBaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperXV6Prem 3 } -- FastIron SuperX V6 Premium Base L3 Switch snFastIronSuperXV6Prem6Router OBJECT IDENTIFIER ::= { snFastIronSuperXV6Prem 4 } -- FastIron SuperX V6 Premium Ipv6 Router - snFastIronSuperX800V6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 9 } -- FastIron SuperX 800 V6 + snFastIronSuperX800V6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 9 } -- FastIron SuperX 800 V6 snFastIronSuperX800V6Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800V6 1 } -- FastIron SuperX 800 V6 Switch snFastIronSuperX800V6Router OBJECT IDENTIFIER ::= { snFastIronSuperX800V6 2 } -- FastIron SuperX 800 V6 - Ipv4 Router snFastIronSuperX800V6BaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800V6 3 } -- FastIron SuperX 800 V6 Base L3 Switch @@ -661,7 +665,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronSuperX800V6PremBaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX800V6Prem 3 } -- FastIron SuperX 800 Premium V6 Base L3 Switch snFastIronSuperX800V6Prem6Router OBJECT IDENTIFIER ::= { snFastIronSuperX800V6Prem 4 } -- FastIron SuperX 800 Premium V6- Ipv6 Router - snFastIronSuperX1600V6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 11 } -- FastIron SuperX 1600 V6 + snFastIronSuperX1600V6 OBJECT IDENTIFIER ::= { snFastIronSuperXFamily 11 } -- FastIron SuperX 1600 V6 snFastIronSuperX1600V6Switch OBJECT IDENTIFIER ::= { snFastIronSuperX1600V6 1 } -- FastIron SuperX 1600 V6 Switch snFastIronSuperX1600V6Router OBJECT IDENTIFIER ::= { snFastIronSuperX1600V6 2 } -- FastIron SuperX 1600 V6 - Ipv4 Router snFastIronSuperX1600V6BaseL3Switch OBJECT IDENTIFIER ::= { snFastIronSuperX1600V6 3 } -- FastIron SuperX 1600 V6 Base L3 Switch @@ -760,7 +764,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFGS624XGPRouter OBJECT IDENTIFIER ::= { snFGS624XGP 2 } -- FGS624XGP router snFGS624PPOEFamily OBJECT IDENTIFIER ::= { snFGS624Family 3 } - snFGS624PPOE OBJECT IDENTIFIER ::= { snFGS624PPOEFamily 1 } -- FastIron GS Switch(FGS) 24-port 10/100/1000 POE + snFGS624PPOE OBJECT IDENTIFIER ::= { snFGS624PPOEFamily 1 } -- FastIron GS Switch(FGS) 24-port 10/100/1000 POE snFGS624PPOESwitch OBJECT IDENTIFIER ::= { snFGS624PPOE 1 } -- snFGS624P-POE switch snFGS624PPOERouter OBJECT IDENTIFIER ::= { snFGS624PPOE 2 } -- snFGS624P-POE router @@ -777,7 +781,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFGS648PRouter OBJECT IDENTIFIER ::= { snFGS648P 2 } -- FGS648P router snFGS648PPOEFamily OBJECT IDENTIFIER ::= { snFGS648Family 2 } - snFGS648PPOE OBJECT IDENTIFIER ::= { snFGS648PPOEFamily 1 } -- FastIron GS Switch(FGS) 48-port 10/100/1000 POE + snFGS648PPOE OBJECT IDENTIFIER ::= { snFGS648PPOEFamily 1 } -- FastIron GS Switch(FGS) 48-port 10/100/1000 POE snFGS648PPOESwitch OBJECT IDENTIFIER ::= { snFGS648PPOE 1 } -- snFGS648P-POE switch snFGS648PPOERouter OBJECT IDENTIFIER ::= { snFGS648PPOE 2 } -- snFGS648P-POE router @@ -786,7 +790,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFLS624Family OBJECT IDENTIFIER ::= { snFLSFamily 1 } snFLS624BaseFamily OBJECT IDENTIFIER ::= { snFLS624Family 1 } - snFLS624 OBJECT IDENTIFIER ::= { snFLS624BaseFamily 1 } -- FastIron LS Switch(FLS) 24-port 10/100/1000 + snFLS624 OBJECT IDENTIFIER ::= { snFLS624BaseFamily 1 } -- FastIron LS Switch(FLS) 24-port 10/100/1000 snFLS624Switch OBJECT IDENTIFIER ::= { snFLS624 1 } -- FLS624 switch snFLS624Router OBJECT IDENTIFIER ::= { snFLS624 2 } -- FLS624 router @@ -875,20 +879,21 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values serverIronAdx10000SslSwitch OBJECT IDENTIFIER ::= { serverIronAdx10000Ssl 1 } -- ServerIron ADX 10000 SSL switch serverIronAdx10000SslRouter OBJECT IDENTIFIER ::= { serverIronAdx10000Ssl 2 } -- ServerIron ADX 10000 SSL router + --FastIron GS/LS/CX (FGS/FLS/FCX/ICX) stacking family snFastIronStackFamily OBJECT IDENTIFIER ::= { registration 48 } -- FGS/FLS/FCX/ICX stacking family - - snFastIronStack OBJECT IDENTIFIER ::= { snFastIronStackFamily 1 } + + snFastIronStack OBJECT IDENTIFIER ::= { snFastIronStackFamily 1 } snFastIronStackSwitch OBJECT IDENTIFIER ::= { snFastIronStack 1} --FGS/FLS switch snFastIronStackRouter OBJECT IDENTIFIER ::= { snFastIronStack 2} --FGS/FLS router - snFastIronStackFCX OBJECT IDENTIFIER ::= { snFastIronStackFamily 2 } + snFastIronStackFCX OBJECT IDENTIFIER ::= { snFastIronStackFamily 2 } snFastIronStackFCXSwitch OBJECT IDENTIFIER ::= { snFastIronStackFCX 1} -- FCX switch snFastIronStackFCXBaseL3Router OBJECT IDENTIFIER ::= { snFastIronStackFCX 2} --FCX Base L3 router snFastIronStackFCXRouter OBJECT IDENTIFIER ::= { snFastIronStackFCX 3} --FCX Premium Router - snFastIronStackFCXAdvRouter OBJECT IDENTIFIER ::= { snFastIronStackFCX 4} --FCX Advanced Premium Router (BGP) + snFastIronStackFCXAdvRouter OBJECT IDENTIFIER ::= { snFastIronStackFCX 4} --FCX Advanced Router (BGP) - snFastIronStackICX6610 OBJECT IDENTIFIER ::= { snFastIronStackFamily 3 } + snFastIronStackICX6610 OBJECT IDENTIFIER ::= { snFastIronStackFamily 3 } snFastIronStackICX6610Switch OBJECT IDENTIFIER ::= { snFastIronStackICX6610 1} -- ICX6610 switch snFastIronStackICX6610BaseL3Router OBJECT IDENTIFIER ::= { snFastIronStackICX6610 2} --ICX6610 Base L3 router snFastIronStackICX6610Router OBJECT IDENTIFIER ::= { snFastIronStackICX6610 3} --ICX6610 Base Router @@ -909,7 +914,7 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronStackMixedStackBaseL3Router OBJECT IDENTIFIER ::= { snFastIronStackMixedStack 2} --FastIron MixedStack Base L3 router snFastIronStackMixedStackRouter OBJECT IDENTIFIER ::= { snFastIronStackMixedStack 3} -- FastIron MixedStack Router snFastIronStackMixedStackPRouter OBJECT IDENTIFIER ::= { snFastIronStackMixedStack 4} -- FastIron MixedStack Premium Router - snFastIronStackMixedStackARouter OBJECT IDENTIFIER ::= { snFastIronStackMixedStack 5} --FastIron MixedStack Advanced Router + snFastIronStackMixedStackARouter OBJECT IDENTIFIER ::= { snFastIronStackMixedStack 5} --FastIronMixedStack Advanced Router snFastIronStackICX7750 OBJECT IDENTIFIER ::= { snFastIronStackFamily 7 } snFastIronStackICX7750Switch OBJECT IDENTIFIER ::= { snFastIronStackICX7750 1} -- ICX7750 switch @@ -926,19 +931,35 @@ registration OBJECT IDENTIFIER ::= { products 3 } -- sysObjectID values snFastIronStackICX7250BaseL3Router OBJECT IDENTIFIER ::= { snFastIronStackICX7250 2} -- ICX7250 Base L3 router snFastIronStackICX7250Router OBJECT IDENTIFIER ::= { snFastIronStackICX7250 3} -- ICX7250 Router + snFastIronStackICX7150 OBJECT IDENTIFIER ::= { snFastIronStackFamily 10 } + snFastIronStackICX7150Switch OBJECT IDENTIFIER ::= { snFastIronStackICX7150 1} -- ICX7150 switch + snFastIronStackICX7150Router OBJECT IDENTIFIER ::= { snFastIronStackICX7150 2} -- ICX7150 Router + + snFastIronStackICX7650 OBJECT IDENTIFIER ::= { snFastIronStackFamily 11 } + snFastIronStackICX7650Switch OBJECT IDENTIFIER ::= { snFastIronStackICX7650 1} -- ICX7650 switch + snFastIronStackICX7650Router OBJECT IDENTIFIER ::= { snFastIronStackICX7650 2} -- ICX7650 router + + snFastIronStackICX7850 OBJECT IDENTIFIER ::= { snFastIronStackFamily 12 } + snFastIronStackICX7850Switch OBJECT IDENTIFIER ::= { snFastIronStackICX7850 1} -- ICX7850 switch + snFastIronStackICX7850Router OBJECT IDENTIFIER ::= { snFastIronStackICX7850 2} -- ICX7850 router + + snFastIronStackICX7550 OBJECT IDENTIFIER ::= { snFastIronStackFamily 13 } + snFastIronStackICX7550Switch OBJECT IDENTIFIER ::= { snFastIronStackICX7550 1} -- ICX7550 switch + snFastIronStackICX7550Router OBJECT IDENTIFIER ::= { snFastIronStackICX7550 2} -- ICX7550 router + + snFastIronStackICX8200 OBJECT IDENTIFIER ::= { snFastIronStackFamily 14 } + snFastIronStackICX8200Switch OBJECT IDENTIFIER ::= { snFastIronStackICX8200 1} -- ICX8200 switch (a placehodler) + snFastIronStackICX8200Router OBJECT IDENTIFIER ::= { snFastIronStackICX8200 2} -- ICX8200 router + -- NetIron Carrier Ethernet Switch (CES) product line -snCes2000Family OBJECT IDENTIFIER ::= { registration 49 } +snCes2000Family OBJECT IDENTIFIER ::= { registration 49 } - snCes2024F OBJECT IDENTIFIER ::= { snCes2000Family 1 } -- 24X1G fiber - snCes2024C OBJECT IDENTIFIER ::= { snCes2000Family 2 } -- 24X1G copper - snCes2048F OBJECT IDENTIFIER ::= { snCes2000Family 3 } -- 48X1G fiber + snCes2024F OBJECT IDENTIFIER ::= { snCes2000Family 1 } -- 24X1G fiber + snCes2024C OBJECT IDENTIFIER ::= { snCes2000Family 2 } -- 24X1G copper + snCes2048F OBJECT IDENTIFIER ::= { snCes2000Family 3 } -- 48X1G fiber snCes2048C OBJECT IDENTIFIER ::= { snCes2000Family 4 } -- 48X1G copper - snCes2048FX OBJECT IDENTIFIER ::= { snCes2000Family 5 } -- 48X1G fiber + 2X10G + snCes2048FX OBJECT IDENTIFIER ::= { snCes2000Family 5 } -- 48X1G fiber + 2X10G snCes2048CX OBJECT IDENTIFIER ::= { snCes2000Family 6 } -- 48X1G copper + 2X10G - snCes2024F4X OBJECT IDENTIFIER ::= { snCes2000Family 7 } -- BR-CES-2024F-4X (24X1GbE Fiber with 4 Copper combo, 4X10GbE) - snCes2024C4X OBJECT IDENTIFIER ::= { snCes2000Family 8 } -- BR-CES-2024C-4X (24X1GbE Copper with 4 Fiber combo, 4X10GbE) - - snFLSLCFamily OBJECT IDENTIFIER ::= { registration 50 } -- FastIron LSLC series family snFLSLC624Family OBJECT IDENTIFIER ::= { snFLSLCFamily 1 } @@ -949,7 +970,7 @@ snCes2000Family OBJECT IDENTIFIER ::= { registration 49 } snFLSLC624Router OBJECT IDENTIFIER ::= { snFLSLC624 2 } -- FLSLC624 router snFLSLC624POEFamily OBJECT IDENTIFIER ::= { snFLSLC624Family 2 } - snFLSLC624POE OBJECT IDENTIFIER ::= { snFLSLC624POEFamily 1 } -- FastIron LSLC Switch(FLSLC) 24-port 10/100/1000 POE + snFLSLC624POE OBJECT IDENTIFIER ::= { snFLSLC624POEFamily 1 } -- FastIron LSLC Switch(FLSLC) 24-port 10/100/1000 POE snFLSLC624POESwitch OBJECT IDENTIFIER ::= { snFLSLC624POE 1 } -- snFLSLC624-POE switch snFLSLC624POERouter OBJECT IDENTIFIER ::= { snFLSLC624POE 2 } -- snFLSLC624-POE router @@ -962,47 +983,43 @@ snCes2000Family OBJECT IDENTIFIER ::= { registration 49 } snFLSLC648Router OBJECT IDENTIFIER ::= { snFLSLC648 2 } -- FLSLC648 router snFLSLC648POEFamily OBJECT IDENTIFIER ::= { snFLSLC648Family 2 } - snFLSLC648POE OBJECT IDENTIFIER ::= { snFLSLC648POEFamily 1 } -- FastIron LSLC Switch(FLSLC) 48-port 10/100/1000 POE + snFLSLC648POE OBJECT IDENTIFIER ::= { snFLSLC648POEFamily 1 } -- FastIron LSLC Switch(FLSLC) 48-port 10/100/1000 POE snFLSLC648POESwitch OBJECT IDENTIFIER ::= { snFLSLC648POE 1 } -- snFLSLC648-POE switch snFLSLC648POERouter OBJECT IDENTIFIER ::= { snFLSLC648POE 2 } -- snFLSLC648-POE router -- NetIron Carrier Ethernet Router (CER) product line -snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } +snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } - snCer2024F OBJECT IDENTIFIER ::= { snCer2000Family 1 } -- 24X1G fiber - snCer2024C OBJECT IDENTIFIER ::= { snCer2000Family 2 } -- 24X1G copper - snCer2048F OBJECT IDENTIFIER ::= { snCer2000Family 3 } -- 48X1G fiber + snCer2024F OBJECT IDENTIFIER ::= { snCer2000Family 1 } -- 24X1G fiber + snCer2024C OBJECT IDENTIFIER ::= { snCer2000Family 2 } -- 24X1G copper + snCer2048F OBJECT IDENTIFIER ::= { snCer2000Family 3 } -- 48X1G fiber snCer2048C OBJECT IDENTIFIER ::= { snCer2000Family 4 } -- 48X1G copper - snCer2048FX OBJECT IDENTIFIER ::= { snCer2000Family 5 } -- 48X1G fiber + 2X10G + snCer2048FX OBJECT IDENTIFIER ::= { snCer2000Family 5 } -- 48X1G fiber + 2X10G snCer2048CX OBJECT IDENTIFIER ::= { snCer2000Family 6 } -- 48X1G copper + 2X10G - snCer2024F4X OBJECT IDENTIFIER ::= { snCer2000Family 7 } -- BR-CER-2024F-4X (24X1GbE Fiber with 4 Copper combo, 4X10GbE) - snCer2024C4X OBJECT IDENTIFIER ::= { snCer2000Family 8 } -- BR-CER-2024C-4X (24X1GbE Copper with 4 Fiber combo, 4X10GbE) - - snFWSFamily OBJECT IDENTIFIER ::= { registration 52 } -- FastIron WS series family snFWS624Family OBJECT IDENTIFIER ::= { snFWSFamily 1 } snFWS624BaseFamily OBJECT IDENTIFIER ::= { snFWS624Family 1 } - snFWS624 OBJECT IDENTIFIER ::= { snFWS624BaseFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100 + snFWS624 OBJECT IDENTIFIER ::= { snFWS624BaseFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100 snFWS624Switch OBJECT IDENTIFIER ::= { snFWS624 1 } -- FWS624 switch snFWS624BaseL3Router OBJECT IDENTIFIER ::= { snFWS624 2 } -- FWS624 Base L3 router snFWS624EdgePremRouter OBJECT IDENTIFIER ::= { snFWS624 3 } -- FWS624 Edge Prem router snFWS624GFamily OBJECT IDENTIFIER ::= { snFWS624Family 2 } - snFWS624G OBJECT IDENTIFIER ::= { snFWS624GFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100/1000 + snFWS624G OBJECT IDENTIFIER ::= { snFWS624GFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100/1000 snFWS624GSwitch OBJECT IDENTIFIER ::= { snFWS624G 1 } -- FWS624G switch snFWS624GBaseL3Router OBJECT IDENTIFIER ::= { snFWS624G 2 } -- FWS624G Base L3 router snFWS624GEdgePremRouter OBJECT IDENTIFIER ::= { snFWS624G 3 } -- FWS624G Edge Prem router snFWS624POEFamily OBJECT IDENTIFIER ::= { snFWS624Family 3 } - snFWS624POE OBJECT IDENTIFIER ::= { snFWS624POEFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100 POE - snFWS624POESwitch OBJECT IDENTIFIER ::= { snFWS624POE 1 } -- FWS624-POE switch + snFWS624POE OBJECT IDENTIFIER ::= { snFWS624POEFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100 POE + snFWS624POESwitch OBJECT IDENTIFIER ::= { snFWS624POE 1 } -- FWS624-POE switch snFWS624POEBaseL3Router OBJECT IDENTIFIER ::= { snFWS624POE 2 } -- FWS624-POE Base L3 router snFWS624POEEdgePremRouter OBJECT IDENTIFIER ::= { snFWS624POE 3 } -- FWS624-POE Edge Prem router snFWS624GPOEFamily OBJECT IDENTIFIER ::= { snFWS624Family 4 } - snFWS624GPOE OBJECT IDENTIFIER ::= { snFWS624GPOEFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100/1000 POE + snFWS624GPOE OBJECT IDENTIFIER ::= { snFWS624GPOEFamily 1 } -- FastIron WS Switch(FWS) 24-port 10/100/1000 POE snFWS624GPOESwitch OBJECT IDENTIFIER ::= { snFWS624GPOE 1 } -- FWS624G-POE switch snFWS624GPOEBaseL3Router OBJECT IDENTIFIER ::= { snFWS624GPOE 2 } -- FWS624G-POE Base L3 router snFWS624GPOEEdgePremRouter OBJECT IDENTIFIER ::= { snFWS624GPOE 3 } -- FWS624G-POE Edge Prem router @@ -1028,7 +1045,7 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snFWS648POEEdgePremRouter OBJECT IDENTIFIER ::= { snFWS648POE 3 } -- FWS648-POE Edge Prem router snFWS648GPOEFamily OBJECT IDENTIFIER ::= { snFWS648Family 4 } - snFWS648GPOE OBJECT IDENTIFIER ::= { snFWS648GPOEFamily 1 } -- FastIron WS Switch(FWS) 48-port 10/100/1000 POE + snFWS648GPOE OBJECT IDENTIFIER ::= { snFWS648GPOEFamily 1 } -- FastIron WS Switch(FWS) 48-port 10/100/1000 POE snFWS648GPOESwitch OBJECT IDENTIFIER ::= { snFWS648GPOE 1 } -- FWS648G-POE switch snFWS648GPOEBaseL3Router OBJECT IDENTIFIER ::= { snFWS648GPOE 2 } -- FWS648G-POE Base L3 router snFWS648GPOEEdgePremRouter OBJECT IDENTIFIER ::= { snFWS648GPOE 3 } -- FWS648G-POE Edge Prem router @@ -1041,42 +1058,43 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snTI2X48Switch OBJECT IDENTIFIER ::= { snTI2X48Family 1} --TOR 48X switch snTI2X48Router OBJECT IDENTIFIER ::= { snTI2X48Family 2} --TOR 48X router + --FastIron CX (FCX) family snFCXFamily OBJECT IDENTIFIER ::= { registration 54 } -- FastIron CX series family snFCX624Family OBJECT IDENTIFIER ::= { snFCXFamily 1 } snFCX624SBaseFamily OBJECT IDENTIFIER ::= { snFCX624Family 1 } - snFCX624S OBJECT IDENTIFIER ::= { snFCX624SBaseFamily 1 } -- FastIron CX Switch(FCX-S) 24-port 10/100/1000 + snFCX624S OBJECT IDENTIFIER ::= { snFCX624SBaseFamily 1 } -- FastIron CX Switch(FCX-S) 24-port 10/100/1000 snFCX624SSwitch OBJECT IDENTIFIER ::= { snFCX624S 1 } -- FCX624S switch snFCX624SBaseL3Router OBJECT IDENTIFIER ::= { snFCX624S 2 } -- FCX624S Base L3 router snFCX624SRouter OBJECT IDENTIFIER ::= { snFCX624S 3 } -- FCX624S Premium Router - snFCX624SAdvRouter OBJECT IDENTIFIER ::= { snFCX624S 4 } -- FCX624S Advanced Premium Router (BGP) + snFCX624SAdvRouter OBJECT IDENTIFIER ::= { snFCX624S 4 } -- FCX624S Advanced Premium Router (BGP) snFCX624SHPOEFamily OBJECT IDENTIFIER ::= { snFCX624Family 2 } - snFCX624SHPOE OBJECT IDENTIFIER ::= { snFCX624SHPOEFamily 1 } -- FastIron CX Switch(FCX-S) 24-port 10/100/1000 HPOE - snFCX624SHPOESwitch OBJECT IDENTIFIER ::= { snFCX624SHPOE 1 } -- FCX624S-HPOE switch + snFCX624SHPOE OBJECT IDENTIFIER ::= { snFCX624SHPOEFamily 1 } -- FastIron CX Switch(FCX-S) 24-port 10/100/1000 HPOE + snFCX624SHPOESwitch OBJECT IDENTIFIER ::= { snFCX624SHPOE 1 } -- FCX624S-HPOE switch snFCX624SHPOEBaseL3Router OBJECT IDENTIFIER ::= { snFCX624SHPOE 2 } -- FCX624S-HPOE Base L3 router snFCX624SHPOERouter OBJECT IDENTIFIER ::= { snFCX624SHPOE 3 } -- FCX624S-HPOE Premium Router snFCX624SHPOEAdvRouter OBJECT IDENTIFIER ::= { snFCX624SHPOE 4 } -- FCX624S-HPOE Advanced Premium Router (BGP) snFCX624SFFamily OBJECT IDENTIFIER ::= { snFCX624Family 3 } - snFCX624SF OBJECT IDENTIFIER ::= { snFCX624SFFamily 1 } -- FastIron CX Switch(FCX-SF) 24-port 10/100/1000 - snFCX624SFSwitch OBJECT IDENTIFIER ::= { snFCX624SF 1 } -- FCX624SF switch + snFCX624SF OBJECT IDENTIFIER ::= { snFCX624SFFamily 1 } -- FastIron CX Switch(FCX-SF) 24-port 10/100/1000 + snFCX624SFSwitch OBJECT IDENTIFIER ::= { snFCX624SF 1 } -- FCX624SF switch snFCX624SFBaseL3Router OBJECT IDENTIFIER ::= { snFCX624SF 2 } -- FCX624SF Base L3 router snFCX624SFRouter OBJECT IDENTIFIER ::= { snFCX624SF 3 } -- FCX624SF Premium Router - snFCX624SFAdvRouter OBJECT IDENTIFIER ::= { snFCX624SF 4 } -- FCX624SF Advanced Premium Router (BGP) + snFCX624SFAdvRouter OBJECT IDENTIFIER ::= { snFCX624SF 4 } -- FCX624SF Advanced Premium Router (BGP) snFCX624BaseFamily OBJECT IDENTIFIER ::= { snFCX624Family 4 } - snFCX624 OBJECT IDENTIFIER ::= { snFCX624BaseFamily 1 } -- FastIron CX Switch(FCX) 24-port 10/100/1000 + snFCX624 OBJECT IDENTIFIER ::= { snFCX624BaseFamily 1 } -- FastIron CX Switch(FCX) 24-port 10/100/1000 snFCX624Switch OBJECT IDENTIFIER ::= { snFCX624 1 } -- FCX624 switch snFCX624BaseL3Router OBJECT IDENTIFIER ::= { snFCX624 2 } -- FCX624 Base L3 router snFCX624Router OBJECT IDENTIFIER ::= { snFCX624 3 } -- FCX624 Premium Router - snFCX624AdvRouter OBJECT IDENTIFIER ::= { snFCX624 4 } -- FCX624 Advanced Premium Router (BGP) + snFCX624AdvRouter OBJECT IDENTIFIER ::= { snFCX624 4 } -- FCX624 Advanced Premium Router (BGP) snFCX648Family OBJECT IDENTIFIER ::= { snFCXFamily 2 } snFCX648SBaseFamily OBJECT IDENTIFIER ::= { snFCX648Family 1 } - snFCX648S OBJECT IDENTIFIER ::= { snFCX648SBaseFamily 1 } -- FastIron CX Switch(FCX-S) 48-port 10/100/1000 + snFCX648S OBJECT IDENTIFIER ::= { snFCX648SBaseFamily 1 } -- FastIron CX Switch(FCX-S) 48-port 10/100/1000 snFCX648SSwitch OBJECT IDENTIFIER ::= { snFCX648S 1 } -- FCX648S switch snFCX648SBaseL3Router OBJECT IDENTIFIER ::= { snFCX648S 2 } -- FCX648S Base L3 router snFCX648SRouter OBJECT IDENTIFIER ::= { snFCX648S 3 } -- FCX648S Premium Router @@ -1089,26 +1107,15 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snFCX648SHPOERouter OBJECT IDENTIFIER ::= { snFCX648SHPOE 3 } -- FCX648S-HPOE Premium Router snFCX648SHPOEAdvRouter OBJECT IDENTIFIER ::= { snFCX648SHPOE 4 } -- FCX648S-HPOE Advanced Premium Router (BGP) --- snFCX648SFFamily OBJECT IDENTIFIER ::= { snFCX648Family 3 } reserve for FastIron CX Switch(FCX-SF) 48-port 10/100/1000 - +-- snFCX648SFFamily OBJECT IDENTIFIER ::= { snFCX648Family 3 } reserve for FastIron CX Switch(FCX-SF) 48-port 10/100/1000 + snFCX648BaseFamily OBJECT IDENTIFIER ::= { snFCX648Family 4 } - snFCX648 OBJECT IDENTIFIER ::= { snFCX648BaseFamily 1 } -- FastIron CX Switch(FCX) 48-port 10/100/1000 + snFCX648 OBJECT IDENTIFIER ::= { snFCX648BaseFamily 1 } -- FastIron CX Switch(FCX) 48-port 10/100/1000 snFCX648Switch OBJECT IDENTIFIER ::= { snFCX648 1 } -- FCX648 switch snFCX648BaseL3Router OBJECT IDENTIFIER ::= { snFCX648 2 } -- FCX648 Base L3 router snFCX648Router OBJECT IDENTIFIER ::= { snFCX648 3 } -- FCX648 Premium Router snFCX648AdvRouter OBJECT IDENTIFIER ::= { snFCX648 4 } -- FCX648 Advanced Premium Router (BGP) ---Brocade MLXe product family - snBrocadeMLXeFamily OBJECT IDENTIFIER ::= { registration 55 } -- Brocade MLXe product family - - snBrocadeMLXe16 OBJECT IDENTIFIER ::= { snBrocadeMLXeFamily 1 } - snBrocadeMLXe16Router OBJECT IDENTIFIER ::= { snBrocadeMLXe16 2 } - snBrocadeMLXe8 OBJECT IDENTIFIER ::= { snBrocadeMLXeFamily 2 } - snBrocadeMLXe8Router OBJECT IDENTIFIER ::= { snBrocadeMLXe8 2 } - snBrocadeMLXe4 OBJECT IDENTIFIER ::= { snBrocadeMLXeFamily 3 } - snBrocadeMLXe4Router OBJECT IDENTIFIER ::= { snBrocadeMLXe4 2 } - snBrocadeMLXe32 OBJECT IDENTIFIER ::= { snBrocadeMLXeFamily 4 } - snBrocadeMLXe32Router OBJECT IDENTIFIER ::= { snBrocadeMLXe32 2 } --FastIron CX 6610 (ICX6610) family snICX6610Family OBJECT IDENTIFIER ::= { registration 56} -- FastIron CX 6610 series family @@ -1116,48 +1123,49 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX661024Family OBJECT IDENTIFIER ::= { snICX6610Family 1 } snICX661024BaseFamily OBJECT IDENTIFIER ::= { snICX661024Family 1 } - snICX661024 OBJECT IDENTIFIER ::= { snICX661024BaseFamily 1 } -- FastIron CX 6610 Switch(ICX6610) 24-port + snICX661024 OBJECT IDENTIFIER ::= { snICX661024BaseFamily 1 } -- FastIron CX 6610 Switch(ICX6610) 24-port snICX661024Switch OBJECT IDENTIFIER ::= { snICX661024 1 } -- ICX661024 switch snICX661024BaseL3Router OBJECT IDENTIFIER ::= { snICX661024 2 } -- ICX661024 Base L3 router snICX661024Router OBJECT IDENTIFIER ::= { snICX661024 3 } -- ICX661024 Base Router - snICX661024PRouter OBJECT IDENTIFIER ::= { snICX661024 4 } -- ICX661024 Premium Router - snICX661024ARouter OBJECT IDENTIFIER ::= { snICX661024 5 } -- ICX661024 Advanced Router + snICX661024PRouter OBJECT IDENTIFIER ::= { snICX661024 4 } -- ICX661024 Premium Router + snICX661024ARouter OBJECT IDENTIFIER ::= { snICX661024 5 } -- ICX661024 Advanced Router snICX661024HPOEFamily OBJECT IDENTIFIER ::= { snICX661024Family 2 } - snICX661024HPOE OBJECT IDENTIFIER ::= { snICX661024HPOEFamily 1 } -- FastIron CX 6610 Switch(ICX6610) 24-port HPOE - snICX661024HPOESwitch OBJECT IDENTIFIER ::= { snICX661024HPOE 1 } -- ICX661024-HPOE switch + snICX661024HPOE OBJECT IDENTIFIER ::= { snICX661024HPOEFamily 1 } -- FastIron CX 6610 Switch(ICX6610) 24-port HPOE + snICX661024HPOESwitch OBJECT IDENTIFIER ::= { snICX661024HPOE 1 } -- ICX661024-HPOE switch snICX661024HPOEBaseL3Router OBJECT IDENTIFIER ::= { snICX661024HPOE 2 } -- ICX661024-HPOE Base L3 router snICX661024HPOERouter OBJECT IDENTIFIER ::= { snICX661024HPOE 3 } -- ICX661024-HPOE Base Router - snICX661024HPOEPRouter OBJECT IDENTIFIER ::= { snICX661024HPOE 4 } -- ICX661024-HPOE Premium Router - snICX661024HPOEARouter OBJECT IDENTIFIER ::= { snICX661024HPOE 5 } -- ICX661024-HPOE Advanced Router + snICX661024HPOEPRouter OBJECT IDENTIFIER ::= { snICX661024HPOE 4 } -- ICX661024-HPOE Premium Router + snICX661024HPOEARouter OBJECT IDENTIFIER ::= { snICX661024HPOE 5 } -- ICX661024-HPOE Advanced Router snICX661024FFamily OBJECT IDENTIFIER ::= { snICX661024Family 3 } snICX661024F OBJECT IDENTIFIER ::= { snICX661024FFamily 1 } -- FastIron CX Switch(ICX6610-F) 24-port fiber - snICX661024FSwitch OBJECT IDENTIFIER ::= { snICX661024F 1 } -- ICX661024F switch + snICX661024FSwitch OBJECT IDENTIFIER ::= { snICX661024F 1 } -- ICX661024F switch snICX661024FBaseL3Router OBJECT IDENTIFIER ::= { snICX661024F 2 } -- ICX661024F Base L3 router snICX661024FRouter OBJECT IDENTIFIER ::= { snICX661024F 3 } -- ICX661024F Base Router - snICX661024FPRouter OBJECT IDENTIFIER ::= { snICX661024F 4 } -- ICX661024F Premium Router - snICX661024FARouter OBJECT IDENTIFIER ::= { snICX661024F 5 } -- ICX661024F Advanced Router + snICX661024FPRouter OBJECT IDENTIFIER ::= { snICX661024F 4 } -- ICX661024F Premium Router + snICX661024FARouter OBJECT IDENTIFIER ::= { snICX661024F 5 } -- ICX661024F Advanced Router snICX661048Family OBJECT IDENTIFIER ::= { snICX6610Family 2 } snICX661048BaseFamily OBJECT IDENTIFIER ::= { snICX661048Family 1 } - snICX661048 OBJECT IDENTIFIER ::= { snICX661048BaseFamily 1 } -- FastIron CX Switch(ICX6610) 48-port + snICX661048 OBJECT IDENTIFIER ::= { snICX661048BaseFamily 1 } -- FastIron CX Switch(ICX6610) 48-port snICX661048Switch OBJECT IDENTIFIER ::= { snICX661048 1 } -- ICX661048 switch snICX661048BaseL3Router OBJECT IDENTIFIER ::= { snICX661048 2 } -- ICX661048 Base L3 router snICX661048Router OBJECT IDENTIFIER ::= { snICX661048 3 } -- ICX661048 Base Router snICX661048PRouter OBJECT IDENTIFIER ::= { snICX661048 4 } -- ICX661048 Premium Router - snICX661048ARouter OBJECT IDENTIFIER ::= { snICX661048 5} -- ICX661048 Advanced Router + snICX661048ARouter OBJECT IDENTIFIER ::= { snICX661048 5} -- ICX661048 Advanced Router snICX661048HPOEFamily OBJECT IDENTIFIER ::= { snICX661048Family 2 } snICX661048HPOE OBJECT IDENTIFIER ::= { snICX661048HPOEFamily 1 } -- FastIron CX Switch(ICX6610) 48-port HPOE snICX661048HPOESwitch OBJECT IDENTIFIER ::= { snICX661048HPOE 1 } -- ICX661048-HPOE switch snICX661048HPOEBaseL3Router OBJECT IDENTIFIER ::= { snICX661048HPOE 2 } -- ICX661048-HPOE Base L3 router snICX661048HPOERouter OBJECT IDENTIFIER ::= { snICX661048HPOE 3 } -- ICX661048-HPOE Base Router - snICX661048HPOEPRouter OBJECT IDENTIFIER ::= { snICX661048HPOE 4 } -- ICX661048-HPOE Premium Router - snICX661048HPOEARouter OBJECT IDENTIFIER ::= { snICX661048HPOE 5 } -- ICX661048-HPOE Advanced Router + snICX661048HPOEPRouter OBJECT IDENTIFIER ::= { snICX661048HPOE 4 } -- ICX661048-HPOE Premium Router + snICX661048HPOEARouter OBJECT IDENTIFIER ::= { snICX661048HPOE 5 } -- ICX661048-HPOE Advanced Router - --FastIron CX 6430 (ICX6430) family + +--FastIron CX 6430 (ICX6430) family snICX6430Family OBJECT IDENTIFIER ::= { registration 57} -- FastIron CX 6430 series family snICX643024Family OBJECT IDENTIFIER ::= { snICX6430Family 1 } @@ -1165,7 +1173,7 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX643024BaseFamily OBJECT IDENTIFIER ::= { snICX643024Family 1 } snICX643024 OBJECT IDENTIFIER ::= { snICX643024BaseFamily 1 } -- ICX6430 24-port 10/100/1G w/4x1G snICX643024Switch OBJECT IDENTIFIER ::= { snICX643024 1 } -- ICX643024 switch - + snICX643024HPOEFamily OBJECT IDENTIFIER ::= { snICX643024Family 2 } snICX643024HPOE OBJECT IDENTIFIER ::= { snICX643024HPOEFamily 1 } -- ICX6430 24-port HPOE 10/100/1G w/4x1G snICX643024HPOESwitch OBJECT IDENTIFIER ::= { snICX643024HPOE 1 } -- ICX643024-HPOE switch @@ -1181,12 +1189,14 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX643048HPOE OBJECT IDENTIFIER ::= { snICX643048HPOEFamily 1 } -- ICX6430 48-port HPOE 10/100/1G w/4x1G snICX643048HPOESwitch OBJECT IDENTIFIER ::= { snICX643048HPOE 1 } -- ICX643048-HPOE switch + snICX6430C12Family OBJECT IDENTIFIER ::= { snICX6430Family 3 } snICX6430C12BaseFamily OBJECT IDENTIFIER ::= { snICX6430C12Family 1 } snICX6430C12 OBJECT IDENTIFIER ::= { snICX6430C12BaseFamily 1 } -- ICX6430C 12-port 10/100/1G snICX6430C12Switch OBJECT IDENTIFIER ::= { snICX6430C12 1 } -- ICX6430C12 switch + --FastIron CX 6450 (ICX6450) family snICX6450Family OBJECT IDENTIFIER ::= { registration 58} -- FastIron CX 6450 series family @@ -1198,7 +1208,7 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX645024BaseL3Router OBJECT IDENTIFIER ::= { snICX645024 2 } -- ICX645024 Base L3 router snICX645024Router OBJECT IDENTIFIER ::= { snICX645024 3 } -- ICX645024 Base Router snICX645024PRouter OBJECT IDENTIFIER ::= { snICX645024 4 } -- ICX645024 Premium Router - + snICX645024HPOEFamily OBJECT IDENTIFIER ::= { snICX645024Family 2 } snICX645024HPOE OBJECT IDENTIFIER ::= { snICX645024HPOEFamily 1 } --ICX6450 24-port HPOE 10/100/1G w/4x1/10G snICX645024HPOESwitch OBJECT IDENTIFIER ::= { snICX645024HPOE 1 } -- ICX645024-HPOE switch @@ -1231,8 +1241,9 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX6450C12PDRouter OBJECT IDENTIFIER ::= { snICX6450C12PD 3 } -- ICX6450C12-PD Base router snICX6450C12PDPRouter OBJECT IDENTIFIER ::= { snICX6450C12PD 4 } -- ICX6450C12-PD Premium router ---FastIron Brocade ICX 6650 (ICX6650) family - snICX6650Family OBJECT IDENTIFIER ::= { registration 59} -- FastIron Brocade ICX 6650 series family + +--FastIron Ruckus Wireless ICX 6650 (ICX6650) family + snICX6650Family OBJECT IDENTIFIER ::= { registration 59} -- FastIron Ruckus Wireless ICX 6650 series family snICX665064Family OBJECT IDENTIFIER ::= { snICX6650Family 1 } @@ -1242,8 +1253,9 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX665064BaseL3Router OBJECT IDENTIFIER ::= { snICX665064 2 } -- ICX6650 64-port Base L3 router snICX665064Router OBJECT IDENTIFIER ::= { snICX665064 3 } -- ICX6650 64-port Router ---FastIron Brocade ICX 7750 (ICX7750) family - snICX7750Family OBJECT IDENTIFIER ::= { registration 60} -- FastIron Brocade ICX 7750 series family + +--FastIron Ruckus Wireless ICX 7750 (ICX7750) family + snICX7750Family OBJECT IDENTIFIER ::= { registration 60} -- FastIron Ruckus Wireless ICX 7750 series family snICX775048CFamily OBJECT IDENTIFIER ::= { snICX7750Family 1 } @@ -1269,8 +1281,9 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX775026QBaseL3Router OBJECT IDENTIFIER ::= { snICX775026Q 2 } -- ICX775026Q 26-port Base L3 router snICX775026QRouter OBJECT IDENTIFIER ::= { snICX775026Q 3 } -- ICX775026Q 26-port Router ---FastIron Brocade ICX 7450 (ICX7450) family - snICX7450Family OBJECT IDENTIFIER ::= { registration 61} -- FastIron Brocade ICX 7450 series family + +--FastIron Ruckus Wireless ICX 7450 (ICX7450) family + snICX7450Family OBJECT IDENTIFIER ::= { registration 61} -- FastIron Ruckus Wireless ICX 7450 series family snICX745024Family OBJECT IDENTIFIER ::= { snICX7450Family 1 } @@ -1279,7 +1292,7 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX745024Switch OBJECT IDENTIFIER ::= { snICX745024 1 } -- ICX745024 switch snICX745024BaseL3Router OBJECT IDENTIFIER ::= { snICX745024 2 } -- ICX745024 Base L3 router snICX745024Router OBJECT IDENTIFIER ::= { snICX745024 3 } -- ICX745024 Router - + snICX745024HPOEFamily OBJECT IDENTIFIER ::= { snICX745024Family 2 } snICX745024HPOE OBJECT IDENTIFIER ::= { snICX745024HPOEFamily 1 } -- ICX7450-HPOE 24-port POE+ 1G snICX745024HPOESwitch OBJECT IDENTIFIER ::= { snICX745024HPOE 1 } -- ICX745024-HPOE switch @@ -1314,8 +1327,8 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX745032ZPBaseL3Router OBJECT IDENTIFIER ::= { snICX745032ZP 2 } -- ICX745032ZP 32-port Base L3 router snICX745032ZPRouter OBJECT IDENTIFIER ::= { snICX745032ZP 3 } -- ICX745032ZP 32-port Router ---FastIron Brocade ICX 7250 (ICX7250) family - snICX7250Family OBJECT IDENTIFIER ::= { registration 62} -- FastIron Brocade ICX 7250 series family +--FastIron Ruckus Wireless ICX 7250 (ICX7250) family + snICX7250Family OBJECT IDENTIFIER ::= { registration 62} -- FastIron Ruckus Wireless ICX 7250 series family snICX725024Family OBJECT IDENTIFIER ::= { snICX7250Family 1 } @@ -1351,13 +1364,192 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } snICX725048HPOEBaseL3Router OBJECT IDENTIFIER ::= { snICX725048HPOE 2 } -- ICX725048-HPOE 48-port Base L3 router snICX725048HPOERouter OBJECT IDENTIFIER ::= { snICX725048HPOE 3 } -- ICX725048-HPOE 48-port Router --- Brocade FastIron Switch Port Extender (SPX) family +-- Ruckus Wireless FastIron Switch Port Extender (SPX) family snFastIronSPXFamily OBJECT IDENTIFIER ::= { registration 63 } -- ICX 7750/7450 family snFastIronSPX OBJECT IDENTIFIER ::= { snFastIronSPXFamily 1 } snFastIronSPXSwitch OBJECT IDENTIFIER ::= { snFastIronSPX 1} --SPX switch snFastIronSPXRouter OBJECT IDENTIFIER ::= { snFastIronSPX 2} --SPX router +--FastIron Ruckus Wireless ICX 7150 (ICX7150) family + snICX7150Family OBJECT IDENTIFIER ::= { registration 64} -- FastIronRuckus Wireless ICX 7150 series family + + snICX715024Family OBJECT IDENTIFIER ::= { snICX7150Family 1 } + + snICX715024BaseFamily OBJECT IDENTIFIER ::= { snICX715024Family 1 } + snICX715024 OBJECT IDENTIFIER ::= { snICX715024BaseFamily 1 } -- ICX7150 24-port 1G + snICX715024Switch OBJECT IDENTIFIER ::= { snICX715024 1 } -- ICX715024 switch + snICX715024Router OBJECT IDENTIFIER ::= { snICX715024 2 } -- ICX715024 Router + + snICX715024POEFamily OBJECT IDENTIFIER ::= { snICX715024Family 2 } + snICX715024POE OBJECT IDENTIFIER ::= { snICX715024POEFamily 1 } -- ICX7150-POE 24-port POE+ 1G + snICX715024POESwitch OBJECT IDENTIFIER ::= { snICX715024POE 1 } -- ICX715024-POE switch + snICX715024POERouter OBJECT IDENTIFIER ::= { snICX715024POE 2 } -- ICX715024-POE Base Router + + snICX715024FFamily OBJECT IDENTIFIER ::= { snICX715024Family 3 } + snICX715024F OBJECT IDENTIFIER ::= { snICX715024FFamily 1 } -- ICX7150 24-port SFP 1G + snICX715024FSwitch OBJECT IDENTIFIER ::= { snICX715024F 1 } -- ICX715024F switch + snICX715024FRouter OBJECT IDENTIFIER ::= { snICX715024F 2 } -- ICX715024F Router + + snICX715048Family OBJECT IDENTIFIER ::= { snICX7150Family 2 } + + snICX715048BaseFamily OBJECT IDENTIFIER ::= { snICX715048Family 1 } + snICX715048 OBJECT IDENTIFIER ::= { snICX715048BaseFamily 1 } -- ICX715048 48-port 1G + snICX715048Switch OBJECT IDENTIFIER ::= { snICX715048 1 } -- ICX715048 48-port Switch + snICX715048Router OBJECT IDENTIFIER ::= { snICX715048 2 } -- ICX715048 48-port Router + + snICX715048POEFamily OBJECT IDENTIFIER ::= { snICX715048Family 2 } + snICX715048POE OBJECT IDENTIFIER ::= { snICX715048POEFamily 1 } -- ICX715048-POE 48-port POE+ 1G + snICX715048POESwitch OBJECT IDENTIFIER ::= { snICX715048POE 1 } -- ICX715048-POE 48-port Switch + snICX715048POERouter OBJECT IDENTIFIER ::= { snICX715048POE 2 } -- ICX715048-POE 48-port Router + + snICX715048POEFFamily OBJECT IDENTIFIER ::= { snICX715048Family 3 } + snICX715048POEF OBJECT IDENTIFIER ::= { snICX715048POEFFamily 1 } -- ICX715048-POEF 48-port POEF+ 1G + snICX715048POEFSwitch OBJECT IDENTIFIER ::= { snICX715048POEF 1 } -- ICX715048-POEF 48-port Switch + snICX715048POEFRouter OBJECT IDENTIFIER ::= { snICX715048POEF 2 } -- ICX715048-POEF 48-port Router + + snICX715048ZPFamily OBJECT IDENTIFIER ::= { snICX715048Family 4 } + snICX715048ZP OBJECT IDENTIFIER ::= { snICX715048ZPFamily 1 } -- ICX715048-ZP 48-port 16-port 2.5G + 32-port 1G + snICX715048ZPSwitch OBJECT IDENTIFIER ::= { snICX715048ZP 1 } -- ICX715048-ZP 48-port Switch + snICX715048ZPRouter OBJECT IDENTIFIER ::= { snICX715048ZP 2 } -- ICX715048-ZP 48-port Router + + snICX7150C12POEFamily OBJECT IDENTIFIER ::= { snICX7150Family 3 } + + snICX7150C12POEBaseFamily OBJECT IDENTIFIER ::= { snICX7150C12POEFamily 1 } + snICX7150C12POE OBJECT IDENTIFIER ::= { snICX7150C12POEBaseFamily 1 } -- ICX7150C 12-port POE+1G + snICX7150C12POESwitch OBJECT IDENTIFIER ::= { snICX7150C12POE 1 } -- ICX7150C12-POE switch + snICX7150C12POERouter OBJECT IDENTIFIER ::= { snICX7150C12POE 2 } -- ICX7150C12-POE router + + snICX7150C10ZPFamily OBJECT IDENTIFIER ::= { snICX7150Family 4 } + + snICX7150C10ZPBaseFamily OBJECT IDENTIFIER ::= { snICX7150C10ZPFamily 1 } + snICX7150C10ZP OBJECT IDENTIFIER ::= { snICX7150C10ZPBaseFamily 1 } -- ICX7150C 10-port POE+/POH 100M/1G/2.5G + snICX7150C10ZPSwitch OBJECT IDENTIFIER ::= { snICX7150C10ZP 1 } -- ICX7150C10ZP switch + snICX7150C10ZPRouter OBJECT IDENTIFIER ::= { snICX7150C10ZP 2 } -- ICX7150C10ZP router + + snICX7150C08PFamily OBJECT IDENTIFIER ::= { snICX7150Family 5 } + + snICX7150C08PBaseFamily OBJECT IDENTIFIER ::= { snICX7150C08PFamily 1 } + snICX7150C08P OBJECT IDENTIFIER ::= { snICX7150C08PBaseFamily 1 } -- ICX7150C 8-port POE+ 10M/100M/1G + snICX7150C08PSwitch OBJECT IDENTIFIER ::= { snICX7150C08P 1 } -- ICX7150C08P switch + snICX7150C08PRouter OBJECT IDENTIFIER ::= { snICX7150C08P 2 } -- ICX7150C08P router + + +--FastIron ICX 7650 family +snICX7650Family OBJECT IDENTIFIER ::= { registration 65} -- FastIron ICX 7650 series family + +snICX765048Family OBJECT IDENTIFIER ::= { snICX7650Family 1 } + +snICX765048POEBaseFamily OBJECT IDENTIFIER ::= { snICX765048Family 1 } +snICX765048POE OBJECT IDENTIFIER ::= { snICX765048POEBaseFamily 1 } -- ICX765048P 48-port POE+ 1G +snICX765048POESwitch OBJECT IDENTIFIER ::= { snICX765048POE 1 } -- ICX725048P 48-port Switch +snICX765048POERouter OBJECT IDENTIFIER ::= { snICX765048POE 2 } -- ICX725048P 48-port Router + +snICX765048FBaseFamily OBJECT IDENTIFIER ::= { snICX765048Family 2 } +snICX765048F OBJECT IDENTIFIER ::= { snICX765048FBaseFamily 1 } -- ICX765048F 48-port 1G/10G +snICX765048FSwitch OBJECT IDENTIFIER ::= { snICX765048F 1 } -- ICX765048F 48-port Switch +snICX765048FRouter OBJECT IDENTIFIER ::= { snICX765048F 2 } -- ICX765048F 48-port Router + +snICX765048ZPBaseFamily OBJECT IDENTIFIER ::= { snICX765048Family 3 } +snICX765048ZP OBJECT IDENTIFIER ::= { snICX765048ZPBaseFamily 1 } -- ICX765048ZP 48-port 1G/2.5G/5G/10G +snICX765048ZPSwitch OBJECT IDENTIFIER ::= { snICX765048ZP 1 } -- ICX725048ZP 48-port Switch +snICX765048ZPRouter OBJECT IDENTIFIER ::= { snICX765048ZP 2 } -- ICX725048ZP 48-port Router + +--FastIron ICX 7850 family +snICX7850Family OBJECT IDENTIFIER ::= { registration 66} -- FastIron ICX 7850 series family + +snICX785048Family OBJECT IDENTIFIER ::= { snICX7850Family 1 } + +snICX785048FBaseFamily OBJECT IDENTIFIER ::= { snICX785048Family 1 } +snICX785048F OBJECT IDENTIFIER ::= { snICX785048FBaseFamily 1 } -- ICX785048F 48-port 1G/10G +snICX785048FSwitch OBJECT IDENTIFIER ::= { snICX785048F 1 } -- ICX785048F 48-port Switch +snICX785048FRouter OBJECT IDENTIFIER ::= { snICX785048F 2 } -- ICX785048F 48-port Router + +snICX785048FSBaseFamily OBJECT IDENTIFIER ::= { snICX785048Family 2 } +snICX785048FS OBJECT IDENTIFIER ::= { snICX785048FSBaseFamily 1 } -- ICX785048FS 48-port 1G/10G +snICX785048FSSwitch OBJECT IDENTIFIER ::= { snICX785048FS 1 } -- ICX785048FS 48-port Switch +snICX785048FSRouter OBJECT IDENTIFIER ::= { snICX785048FS 2 } -- ICX785048FS 48-port Router + +snICX785032QFamily OBJECT IDENTIFIER ::= { snICX7850Family 2} + +snICX785032QBaseFamily OBJECT IDENTIFIER ::= { snICX785032QFamily 1 } +snICX785032Q OBJECT IDENTIFIER ::= { snICX785032QBaseFamily 1 } -- ICX785032Q 32-port 40G/100G +snICX785032QSwitch OBJECT IDENTIFIER ::= { snICX785032Q 1 } -- ICX785032Q 32-port Switch +snICX785032QRouter OBJECT IDENTIFIER ::= { snICX785032Q 2 } -- ICX785032Q 32-port Router + +--FastIron ICX 7550 family + snICX7550Family OBJECT IDENTIFIER ::= { registration 67} -- FastIron ICX 7550 series family + + snICX755024Family OBJECT IDENTIFIER ::= { snICX7550Family 1 } + + snICX755024BaseFamily OBJECT IDENTIFIER ::= { snICX755024Family 1 } + snICX755024 OBJECT IDENTIFIER ::= { snICX755024BaseFamily 1 } -- ICX7550 24-port 1G + snICX755024Switch OBJECT IDENTIFIER ::= { snICX755024 1 } -- ICX755024 switch + snICX755024Router OBJECT IDENTIFIER ::= { snICX755024 2 } -- ICX755024 Router + + snICX755024POEFamily OBJECT IDENTIFIER ::= { snICX755024Family 2 } + snICX755024POE OBJECT IDENTIFIER ::= { snICX755024POEFamily 1 } -- ICX7550-POE 24-port POE 1G + snICX755024POESwitch OBJECT IDENTIFIER ::= { snICX755024POE 1 } -- ICX755024-POE switch + snICX755024POERouter OBJECT IDENTIFIER ::= { snICX755024POE 2 } -- ICX755024-POE Router + + snICX755024FFamily OBJECT IDENTIFIER ::= { snICX755024Family 3 } + snICX755024F OBJECT IDENTIFIER ::= { snICX755024FFamily 1 } -- ICX7550 24-port SFP 1G + snICX755024FSwitch OBJECT IDENTIFIER ::= { snICX755024F 1 } -- ICX755024F switch + snICX755024FRouter OBJECT IDENTIFIER ::= { snICX755024F 2 } -- ICX755024F Router + + snICX755024ZPFamily OBJECT IDENTIFIER ::= { snICX755024Family 4 } + snICX755024ZP OBJECT IDENTIFIER ::= { snICX755024ZPFamily 1 } -- ICX7550 24-port 12x2.5G+12x10G + snICX755024ZPSwitch OBJECT IDENTIFIER ::= { snICX755024ZP 1 } -- ICX755024ZP switch + snICX755024ZPRouter OBJECT IDENTIFIER ::= { snICX755024ZP 2 } -- ICX755024ZP Router + + snICX755048Family OBJECT IDENTIFIER ::= { snICX7550Family 2 } + + snICX755048BaseFamily OBJECT IDENTIFIER ::= { snICX755048Family 1 } + snICX755048 OBJECT IDENTIFIER ::= { snICX755048BaseFamily 1 } -- ICX7550 48-port 1G + snICX755048Switch OBJECT IDENTIFIER ::= { snICX755048 1 } -- ICX755048 switch + snICX755048Router OBJECT IDENTIFIER ::= { snICX755048 2 } -- ICX755048 Router + + snICX755048POEFamily OBJECT IDENTIFIER ::= { snICX755048Family 2 } + snICX755048POE OBJECT IDENTIFIER ::= { snICX755048POEFamily 1 } -- ICX7550-POE 48-port POE 1G + snICX755048POESwitch OBJECT IDENTIFIER ::= { snICX755048POE 1 } -- ICX755048-POE switch + snICX755048POERouter OBJECT IDENTIFIER ::= { snICX755048POE 2 } -- ICX755048-POE Router + + snICX755048FFamily OBJECT IDENTIFIER ::= { snICX755048Family 3 } + snICX755048F OBJECT IDENTIFIER ::= { snICX755048FFamily 1 } -- ICX7550 48-port SFP 1G + snICX755048FSwitch OBJECT IDENTIFIER ::= { snICX755048F 1 } -- ICX755048F switch + snICX755048FRouter OBJECT IDENTIFIER ::= { snICX755048F 2 } -- ICX755048F Router + + snICX755048ZPFamily OBJECT IDENTIFIER ::= { snICX755048Family 4 } + snICX755048ZP OBJECT IDENTIFIER ::= { snICX755048ZPFamily 1 } -- ICX7550 48-port 36x2.5G+12x10GG + snICX755048ZPSwitch OBJECT IDENTIFIER ::= { snICX755048ZP 1 } -- ICX755048ZP switch + snICX755048ZPRouter OBJECT IDENTIFIER ::= { snICX755048ZP 2 } -- ICX755048ZP Router + +--FastIron Ruckus Wireless ICX 8200 (ICX8200) family (Single image support from FI1000, means there is no Swtich OID) + snICX8200Family OBJECT IDENTIFIER ::= { registration 68} -- FastIronRuckus Wireless ICX 8200 series family + + snICX820024Family OBJECT IDENTIFIER ::= { snICX8200Family 1 } + + snICX820024Router OBJECT IDENTIFIER ::= { snICX820024Family 1 } -- ICX820024 24-port 1G + snICX820024PRouter OBJECT IDENTIFIER ::= { snICX820024Family 2 } -- ICX820024P 24-port POE 1G + snICX820024ZPRouter OBJECT IDENTIFIER ::= { snICX820024Family 3 } -- ICX820024ZP 24-port POE 2.5G + snICX820024FRouter OBJECT IDENTIFIER ::= { snICX820024Family 4 } -- ICX820024F 24-port SFP 1G + snICX820024FXRouter OBJECT IDENTIFIER ::= { snICX820024Family 5 } -- ICX820024FX 16-port SFP 1G + 8-port 2.5G + + snICX820048Family OBJECT IDENTIFIER ::= { snICX8200Family 2 } + + snICX820048Router OBJECT IDENTIFIER ::= { snICX820048Family 1 } -- ICX820048 48-port 1G + snICX820048PRouter OBJECT IDENTIFIER ::= { snICX820048Family 2 } -- ICX820048P 48-port POE 1G + snICX820048PFRouter OBJECT IDENTIFIER ::= { snICX820048Family 3 } -- ICX820048PF 48-port POE 1G + snICX820048PF2Router OBJECT IDENTIFIER ::= { snICX820048Family 4 } -- ICX820048PF2 48-port POE 1G + snICX820048ZP2Router OBJECT IDENTIFIER ::= { snICX820048Family 5 } -- ICX820048ZP2 48-port 32-port 1G + 16-port 2.5G + snICX820048FRouter OBJECT IDENTIFIER ::= { snICX820048Family 6 } -- ICX820048F 48-port SFP 1G + + snICX8200C08Family OBJECT IDENTIFIER ::= { snICX8200Family 3 } + snICX8200C08PRouter OBJECT IDENTIFIER ::= { snICX8200C08Family 1 } -- ICX8200C08P 8-port POE 10M/100M/1G + snICX8200C08PDCRouter OBJECT IDENTIFIER ::= { snICX8200C08Family 2 } -- ICX8200C08PDC 8-port 10M/100M/1G + snICX8200C08PTRouter OBJECT IDENTIFIER ::= { snICX8200C08Family 3 } -- ICX8200C08PT 8-port POE 10M/100M/1G + snICX8200C08PFRouter OBJECT IDENTIFIER ::= { snICX8200C08Family 4 } -- ICX8200C08PF 8-port POE 10M/100M/1G + snICX8200C08ZPRouter OBJECT IDENTIFIER ::= { snICX8200C08Family 5 } -- ICX8200C08ZP 8-port POE 10M/100M/1G/2.5G -- EdgeIron Stackable family edgeIron OBJECT IDENTIFIER ::= { products 4 } @@ -1380,7 +1572,7 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } -- Wireless Application family wirelessApplication OBJECT IDENTIFIER ::= { products 10 } wirelessLocation OBJECT IDENTIFIER ::= { wirelessApplication 1 } - + -- IronPoint Mobility family ironPointMobility OBJECT IDENTIFIER ::= { products 11 } -- IronPoint Mobility Series ironPointMC OBJECT IDENTIFIER ::= { ironPointMobility 1 } -- IronPoint Mobility Controller @@ -1400,13 +1592,6 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } ironPointWirelessRFS OBJECT IDENTIFIER ::= { ironPointWireless 1 } -- IronPoint Wireless RF Switch ironPointWirelessAP OBJECT IDENTIFIER ::= { ironPointWireless 2 } -- IronPoint Wireless Acess Point --- Ethernet Access Switch Product Family - ethernetAccessSwitchFamily OBJECT IDENTIFIER ::= { products 16 } -- Ethernet Access Switch Family - ethernetAccessSwitchBr6910 OBJECT IDENTIFIER ::= { ethernetAccessSwitchFamily 1 } -- BR6910 switch - --- Brocade Entity VendorType OID MIB --- brocadeEntityOIDMIB OBJECT IDENTIFIER ::= { products 17 } This is actually defined in BROCADE-ENTITY-OID-MIB. - -- VENDOR digitalChina OBJECT IDENTIFIER ::= { vendors 1 } @@ -1429,4 +1614,5 @@ snCer2000Family OBJECT IDENTIFIER ::= { registration 51 } bfd OBJECT IDENTIFIER ::= { experimental 3 } -- IETF draft support for Bidirectional Fault Detection mib vplsRoot OBJECT IDENTIFIER ::= { experimental 4 } -- IETF draft support for VPLS bgp4V2Root OBJECT IDENTIFIER ::= { experimental 5 } -- IETF draft support for BGP4. + END diff --git a/foundry/FOUNDRY-SN-STACKING-MIB.mib b/foundry/FOUNDRY-SN-STACKING-MIB.mib index 26e1248f1..3e3b91183 100644 --- a/foundry/FOUNDRY-SN-STACKING-MIB.mib +++ b/foundry/FOUNDRY-SN-STACKING-MIB.mib @@ -12,37 +12,42 @@ IMPORTS InterfaceIndexOrZero FROM IF-MIB; snStacking MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Management Information for stacking system - configuration and operational status. - - Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." + LAST-UPDATED "201809060000Z" -- Sept 6, 2018 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Management Information for stacking system + configuration and operational status. + + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " REVISION "200805050000Z" -- May 5, 2008 DESCRIPTION "" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contac Info, Organization and Decscription" + REVISION "201809060000Z" -- Sept 6, 2018 + DESCRIPTION + "Added and deprecated some MIB objects based on Stacking enhancement features in FI8090" ::= { snSwitch 31} @@ -58,8 +63,8 @@ snStackingTableObjects OBJECT IDENTIFIER ::= { snStacking 2 } -- snStackingGlobalConfigState OBJECT-TYPE - SYNTAX INTEGER { - none(0), + SYNTAX INTEGER { + none(0), enabled(1), disabled(2) } @@ -78,43 +83,43 @@ snStackingGlobalMacAddress OBJECT-TYPE STATUS current DESCRIPTION "Management MAC address of the stacking system. - This is available to change management MAC address of stack - for administrative purpose. It is strongly recommended that this - command should be used with upmost caution to prevent duplicate + This is available to change management MAC address of stack + for administrative purpose. It is strongly recommended that this + command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. - It is mutually exclusive from enabling the persistent MAC timer. + It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address" ::= { snStackingGlobalObjects 2 } snStackingGlobalPersistentMacTimerState OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Configure persistent MAC timer state for stacking feature on the global level. - enable: the persistent MAC timer is active and configured. The persistent MAC + enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address " ::= { snStackingGlobalObjects 3} - + snStackingGlobalPersistentMacTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Persistent MAC timer in minutes for the stacking system - Number of minutes to retain original active stack unit's base MAC address in event of - active unit crash or removal. This timer is triggered when new active unit is elected. - When timer expires, new active unit will change stacking MAC to its own base MAC + Number of minutes to retain original active stack unit's base MAC address in event of + active unit crash or removal. This timer is triggered when new active unit is elected. + When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the - ARP table of peers. If you decide to use new active unit's MAC address, one must enter + ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. - 5 to 6000 - valid value range. + 5 to 6000 - valid value range. 60 - default value." ::= { snStackingGlobalObjects 4 } @@ -154,11 +159,11 @@ snStackingGlobalMixedMode OBJECT-TYPE STATUS current DESCRIPTION "The mixed stacking mode of the system. - mixedStackingMode: the system is in mixed stacking mode (heterogeneous stacking). - classicStackingMode: the system is not in mixed stacking mode (homogeneous stacking). + mixedStackingMode: the system is in a mixed stacking mode (heterogeneous stacking). + classicStackingMode: the system is not in a mixed stacking mode (homogeneous stacking). " ::= { snStackingGlobalObjects 7 } - + snStackingGlobalMaxUnitNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only @@ -176,7 +181,24 @@ snStackingGlobalHighestPriority OBJECT-TYPE for no-stacking device" ::= { snStackingGlobalObjects 9 } +snStackingGlobalZeroTouchEnable OBJECT-TYPE + SYNTAX INTEGER { + none(0), + enabled (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure Stack Zero Touch feature for a stacking system on the global level. + The Zero Touch feature discovers new stack member units, assigns them IDs, + defines stack-port/trunk, and allows member unit to join the stacking system. + none: neutral state, receive packets only + enabled: Stack Zero touch feature is enabled + The none state will be displayed if stacking is not enabled. + The default state is none" + ::= { snStackingGlobalObjects 10} + -- -- Stacking system Table Object Section -- @@ -213,7 +235,10 @@ SnStackingConfigUnitEntry ::= SEQUENCE { snStackingConfigUnitStackPort1 InterfaceIndexOrZero, snStackingConfigUnitStackPort2 InterfaceIndexOrZero, snStackingConfigUnitConnectPort1 InterfaceIndexOrZero, - snStackingConfigUnitConnectPort2 InterfaceIndexOrZero + snStackingConfigUnitConnectPort2 InterfaceIndexOrZero, + snStackingConfigUnitStackTrunk1 OCTET STRING, + snStackingConfigUnitStackTrunk2 OCTET STRING, + snStackingConfigUnitName DisplayString } snStackingConfigUnitIndex OBJECT-TYPE @@ -235,14 +260,19 @@ snStackingConfigUnitIndex OBJECT-TYPE snStackingConfigUnitConfigStackPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "The IfIndex for the configured stacking port. If no - stacking port is configured, it will be displayed zero - and the first two 10G ports as the default stacking ports. - Enter zero to remove the configured stacking port. " - ::= { snStackingConfigUnitEntry 3 } + "The IfIndex for the configured stacking port. If no + stacking port is configured, it will be displayed zero + and the first two 10G ports as the default stacking ports. + Enter zero to remove the configured stacking port. + Note that this object is deprecated from FI8090 because + the default ports are no longer supported. Use snStackingConfigUnitStackPort1 + or snStackingConfigUnitStackPort2 for stack ports. Thus, the value of this + object is one of stack port or zero for backup capability." + ::= { snStackingConfigUnitEntry 3 } + snStackingConfigUnitRowStatus OBJECT-TYPE SYNTAX INTEGER { other(1), @@ -290,43 +320,83 @@ snStackingConfigUnitState OBJECT-TYPE snStackingConfigUnitStackPort1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only + MAX-ACCESS read-write STATUS current DESCRIPTION - "First stack port for each unit. It returns 0 if stack port does not exist." + "A stack port for the unit. It returns 0 if stack port does not exist. + Entering 0 means to delete this stack port. + Note that the maximum stack port on an unit is 2." ::= { snStackingConfigUnitEntry 7 } snStackingConfigUnitStackPort2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only + MAX-ACCESS read-write STATUS current DESCRIPTION - "Second stack port for each unit. It returns 0 if stack port does not exist." + "Other one stack port for the unit. It returns 0 if stack port does not exist. + Entering 0 means to delete this stack port. + Note that the maximum stack port on an unit is 2." ::= { snStackingConfigUnitEntry 8 } snStackingConfigUnitConnectPort1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral - units' stacking port. It returns 0 if connect port does not exist." + units' stacking port. It returns 0 if connect port does not exist. + Note that this object is deprecated from FI8090." ::= { snStackingConfigUnitEntry 9 } snStackingConfigUnitConnectPort2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral - units' stacking port. It returns 0 if connect port does not exist." + units' stacking port. It returns 0 if connect port does not exist. + Note that this object is deprecated from FI8090." ::= { snStackingConfigUnitEntry 10 } + snStackingConfigUnitStackTrunk1 OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A list of interface indices which are the port membership + of a stack trunk on unit. Each interface index is a 32-bit integer + in big endian order. It returns NULL if stack trunk does not exist. + Entering empty octet string means to delete this stack trunk. + Note that the maximum stack trunk on an unit is 2. Each stack trunk + contains up to 16 ports." + ::= { snStackingConfigUnitEntry 11 } + + snStackingConfigUnitStackTrunk2 OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A list of interface indices which are the port membership + of a stack trunk on unit. Each interface index is a 32-bit integer + in big endian order. It returns NULL if stack trunk does not exist. + Entering empty octet string means to delete this stack trunk. + Note that the maximum stack trunk on an unit is 2. Each stack trunk + contains up to 16 ports." + ::= { snStackingConfigUnitEntry 12 } + + snStackingConfigUnitName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A name description of stacking unit." + ::= { snStackingConfigUnitEntry 13 } + -- -- Stacking operation unit Table -- Use this table to display stacking related information for each operational unit @@ -364,11 +434,11 @@ SnStackingOperUnitEntry ::= SEQUENCE { snStackingOperUnitNeighbor2 Integer32, snStackingOperUnitImgVer DisplayString, snStackingOperUnitBuildlVer DisplayString - + } snStackingOperUnitIndex OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -472,7 +542,7 @@ snStackingOperUnitPriority OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Stacking neighbor unit (left) number. + "Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0." ::= { snStackingOperUnitEntry 11 } @@ -482,10 +552,10 @@ snStackingOperUnitPriority OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Stacking neighbor unit (left) number. + "Stacking neighbor unit (right) number. If there is no neighbor unit, then it returns 0." ::= { snStackingOperUnitEntry 12 } - + snStackingOperUnitImgVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only @@ -505,12 +575,14 @@ snStackingOperUnitBuildlVer OBJECT-TYPE -- -- Stacking configuration stack trunk Table -- Use this table to display and configure stack trunks for each unit +-- Note: this table is deprecated from FI8090. Use snStackingConfigUnitStackTrunk1 and +-- snStackingConfigUnitStackTrunk2 for stack trunks. -- snStackingConfigStackTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF SnStackingConfigStackTrunkEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "Stacking configuration stack trunk table." ::= { snStackingTableObjects 3 } @@ -518,7 +590,7 @@ snStackingConfigStackTrunkTable OBJECT-TYPE snStackingConfigStackTrunkEntry OBJECT-TYPE SYNTAX SnStackingConfigStackTrunkEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the stacking configuration Stack trunk table." INDEX { snStackingConfigStackTrunkUnit, snStackingConfigStackTrunkPort1, @@ -537,7 +609,7 @@ SnStackingConfigStackTrunkEntry ::= SEQUENCE { snStackingConfigStackTrunkUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The stacking unit Id" ::= { snStackingConfigStackTrunkEntry 1 } @@ -545,7 +617,7 @@ snStackingConfigStackTrunkUnit OBJECT-TYPE snStackingConfigStackTrunkPort1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain @@ -556,14 +628,14 @@ snStackingConfigStackTrunkUnit OBJECT-TYPE snStackingConfigStackTrunkPort2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist." ::= { snStackingConfigStackTrunkEntry 3 } - + snStackingConfigStackTrunkRowStatus OBJECT-TYPE SYNTAX INTEGER { other(1), @@ -572,7 +644,7 @@ snStackingConfigStackTrunkRowStatus OBJECT-TYPE create(4) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to delete row in the table and control if they are used. The values that @@ -590,7 +662,7 @@ snStackingConfigStackTrunkRowStatus OBJECT-TYPE snStackingConfigStackTrunkNumPort1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION " Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, @@ -601,7 +673,7 @@ snStackingConfigStackTrunkRowStatus OBJECT-TYPE snStackingConfigStackTrunkNumPort2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION " Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, @@ -612,12 +684,13 @@ snStackingConfigStackTrunkRowStatus OBJECT-TYPE -- -- Stacking configuration peripheral port Table -- Use this table to display and configure mixed stacking peripheral ports for each unit +-- Note: this table is deprecated from FI8090. -- snStackingConfigPeriPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnStackingConfigPeriPortEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "Stacking configuration peripheral port table." ::= { snStackingTableObjects 4 } @@ -625,7 +698,7 @@ snStackingConfigPeriPortTable OBJECT-TYPE snStackingConfigPeriPortEntry OBJECT-TYPE SYNTAX SnStackingConfigPeriPortEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the stacking configuration peripheral port table." INDEX { snStackingConfigPeriPortUnit, snStackingConfigPeriPortPort } @@ -640,7 +713,7 @@ SnStackingConfigPeriPortEntry ::= SEQUENCE { snStackingConfigPeriPortUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The stacking unit Id" ::= { snStackingConfigPeriPortEntry 1 } @@ -648,12 +721,12 @@ snStackingConfigPeriPortUnit OBJECT-TYPE snStackingConfigPeriPortPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. " ::= { snStackingConfigPeriPortEntry 2 } - + snStackingConfigPeriPortRowStatus OBJECT-TYPE SYNTAX INTEGER { other(1), @@ -662,7 +735,7 @@ snStackingConfigPeriPortRowStatus OBJECT-TYPE create(4) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to delete row in the table and control if they are used. The values that @@ -681,12 +754,13 @@ snStackingConfigPeriPortRowStatus OBJECT-TYPE -- -- Stacking configuration peripheral trunk Table -- Use this table to display and configure mixed stacking peripheral trunks for each unit +-- Note: this table is deprecated from FI8090. -- snStackingConfigPeriTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF SnStackingConfigPeriTrunkEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "Stacking configuration peripheral trunk table." ::= { snStackingTableObjects 5 } @@ -694,7 +768,7 @@ snStackingConfigPeriTrunkTable OBJECT-TYPE snStackingConfigPeriTrunkEntry OBJECT-TYPE SYNTAX SnStackingConfigPeriTrunkEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the stacking configuration peripheral trunk table." INDEX { snStackingConfigPeriTrunkUnit, snStackingConfigPeriTrunkPort1, @@ -711,7 +785,7 @@ SnStackingConfigPeriTrunkEntry ::= SEQUENCE { snStackingConfigPeriTrunkUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The stacking unit Id" ::= { snStackingConfigPeriTrunkEntry 1 } @@ -719,7 +793,7 @@ snStackingConfigPeriTrunkUnit OBJECT-TYPE snStackingConfigPeriTrunkPort1 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit." @@ -728,12 +802,12 @@ snStackingConfigPeriTrunkUnit OBJECT-TYPE snStackingConfigPeriTrunkPort2 OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit." ::= { snStackingConfigPeriTrunkEntry 3 } - + snStackingConfigPeriTrunkRowStatus OBJECT-TYPE SYNTAX INTEGER { other(1), @@ -799,16 +873,19 @@ snStackingNeighborPortUnit OBJECT-TYPE STATUS current DESCRIPTION "The IfIndex for the stack port on this unit. - It is up to ten stack ports and peripheral ports per unit. " + if it is a stack trunk, then this port is the first port + of stack trunk." ::= { snStackingNeighborPortEntry 2 } - + snStackingNeighborPortNeighborPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION - "The IfIndex for the neighbor port of the stack port on this unit. + "The IfIndex for the neighbor port of the stack port on this unit. + if it is a stack trunk, then this port is the first port of stack + trunk on the neighbor unit. It returns 0 if neighbor port does not exist for this stack port. " ::= { snStackingNeighborPortEntry 3 } - + END diff --git a/foundry/FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB.mib b/foundry/FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB.mib index d36bdc896..af6676eac 100644 --- a/foundry/FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB.mib @@ -3,49 +3,50 @@ FOUNDRY-SN-SW-L4-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Counter32, TimeTicks,Counter64,Integer32 FROM SNMPv2-SMI - + switch FROM FOUNDRY-SN-ROOT-MIB - + TEXTUAL-CONVENTION FROM SNMPv2-TC - + PhysAddress FROM FOUNDRY-SN-SWITCH-GROUP-MIB - + DisplayString FROM FOUNDRY-SN-AGENT-MIB; - + snL4 MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + " + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Description" ::= { switch 4} -- textual conventions @@ -61,7 +62,7 @@ snL4 MODULE-IDENTITY delete(3), create(4), modify(5) - } + } L4Status ::= TEXTUAL-CONVENTION STATUS current @@ -78,7 +79,7 @@ snL4 MODULE-IDENTITY L4 Server Name " SYNTAX OCTET STRING (SIZE(1..32)) - + L4Flag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION @@ -146,7 +147,7 @@ snL4History OBJECT IDENTIFIER ::= { snL4 28 } -- L4 General MIBs - + snL4MaxSessionLimit OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write @@ -482,7 +483,7 @@ snL4EnableBecomeActiveTrap OBJECT-TYPE ::= { snL4Gen 38 } snL4slbRouterInterfacePortMask OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION @@ -694,7 +695,7 @@ snL4VirtualServerDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4VirtualServerEntry 7 } @@ -797,7 +798,7 @@ snL4RealServerDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4RealServerEntry 8 } @@ -879,7 +880,7 @@ snL4VirtualServerPortAdminStatus OBJECT-TYPE snL4VirtualServerPortSticky OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current @@ -891,7 +892,7 @@ snL4VirtualServerPortAdminStatus OBJECT-TYPE snL4VirtualServerPortConcurrent OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current @@ -901,7 +902,7 @@ snL4VirtualServerPortAdminStatus OBJECT-TYPE snL4VirtualServerPortRowStatus OBJECT-TYPE - SYNTAX L4RowSts + SYNTAX L4RowSts MAX-ACCESS read-write STATUS current DESCRIPTION @@ -913,7 +914,7 @@ snL4VirtualServerPortDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4VirtualServerPortEntry 8 } @@ -987,7 +988,7 @@ snL4RealServerPortAdminStatus OBJECT-TYPE ::= { snL4RealServerPortEntry 4 } snL4RealServerPortRowStatus OBJECT-TYPE - SYNTAX L4RowSts + SYNTAX L4RowSts MAX-ACCESS read-write STATUS current DESCRIPTION @@ -999,7 +1000,7 @@ snL4RealServerPortDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4RealServerPortEntry 6 } @@ -1151,7 +1152,7 @@ snL4VirtualServerStatusReceivePkts OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatusEntry 3 } snL4VirtualServerStatusTransmitPkts OBJECT-TYPE @@ -1159,7 +1160,7 @@ snL4VirtualServerStatusTransmitPkts OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatusEntry 4 } snL4VirtualServerStatusTotalConnections OBJECT-TYPE @@ -1167,7 +1168,7 @@ snL4VirtualServerStatusTotalConnections OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatusEntry 5 } @@ -1748,7 +1749,7 @@ SnL4PolicyPortAccessEntry ::= SEQUENCE { } snL4PolicyPortAccessPort OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -1936,7 +1937,7 @@ snL4WebCacheDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4WebCacheEntry 7 } @@ -2001,8 +2002,8 @@ snL4WebCacheGroupWebCacheIpList STATUS current DESCRIPTION "A list of the Server Cache Group Real Server IP Address. - The number of IP Address is from 1 (4 OCTETs) to the - snL4MaxNumServersPerWebCacheGroup, maximum number of + The number of IP Address is from 1 (4 OCTETs) to the + snL4MaxNumServersPerWebCacheGroup, maximum number of server IP Address allowed in the list." ::= { snL4WebCacheGroupEntry 3 } @@ -2024,7 +2025,7 @@ snL4WebCacheGroupSrcMask OBJECT-TYPE snL4WebCacheGroupAdminStatus OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -2032,7 +2033,7 @@ snL4WebCacheGroupAdminStatus OBJECT-TYPE DESCRIPTION "The WEB Cache Group is set either enabled(1)...........activated. - disabled(0)..........disabled." + disabled(0)..........disabled." ::= { snL4WebCacheGroupEntry 6 } snL4WebCacheGroupRowStatus OBJECT-TYPE @@ -2044,7 +2045,7 @@ snL4WebCacheGroupAdminStatus OBJECT-TYPE ::= { snL4WebCacheGroupEntry 7 } --- Web Cache Traffic Statistics Table +-- Web Cache Traffic Statistics Table snL4WebCacheTrafficStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnL4WebCacheTrafficStatsEntry @@ -2153,10 +2154,10 @@ snL4WebCachePortState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Web Cache Port state." + "Web Cache Port state." ::= { snL4WebCacheTrafficStatsEntry 9 } --- Web Uncached Traffic Statistics Table +-- Web Uncached Traffic Statistics Table snL4WebUncachedTrafficStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnL4WebUncachedTrafficStatsEntry @@ -2195,7 +2196,7 @@ SnL4WebUncachedTrafficStatsEntry ::= SEQUENCE { } snL4WebServerPort OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2203,7 +2204,7 @@ snL4WebServerPort OBJECT-TYPE ::= { snL4WebUncachedTrafficStatsEntry 1 } snL4WebClientPort OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -2317,7 +2318,7 @@ snL4WebCachePortAdminStatus OBJECT-TYPE ::= { snL4WebCachePortEntry 3 } snL4WebCachePortRowStatus OBJECT-TYPE - SYNTAX L4RowSts + SYNTAX L4RowSts MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2329,10 +2330,10 @@ snL4WebCachePortDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4WebCachePortEntry 5 } --- Real Server Configuration table +-- Real Server Configuration table snL4RealServerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SnL4RealServerCfgEntry @@ -2420,7 +2421,7 @@ snL4RealServerCfgDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4RealServerCfgEntry 7 } @@ -2493,7 +2494,7 @@ snL4RealServerPortCfgAdminStatus OBJECT-TYPE ::= { snL4RealServerPortCfgEntry 4 } snL4RealServerPortCfgRowStatus OBJECT-TYPE - SYNTAX L4RowSts + SYNTAX L4RowSts MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2505,7 +2506,7 @@ snL4RealServerPortCfgDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4RealServerPortCfgEntry 6 } @@ -2594,7 +2595,7 @@ snL4VirtualServerCfgDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4VirtualServerCfgEntry 6 } @@ -2674,7 +2675,7 @@ snL4VirtualServerPortCfgAdminStatus OBJECT-TYPE snL4VirtualServerPortCfgSticky OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current @@ -2686,7 +2687,7 @@ snL4VirtualServerPortCfgAdminStatus OBJECT-TYPE snL4VirtualServerPortCfgConcurrent OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current @@ -2696,7 +2697,7 @@ snL4VirtualServerPortCfgAdminStatus OBJECT-TYPE snL4VirtualServerPortCfgRowStatus OBJECT-TYPE - SYNTAX L4RowSts + SYNTAX L4RowSts MAX-ACCESS read-write STATUS current DESCRIPTION @@ -2708,7 +2709,7 @@ snL4VirtualServerPortCfgDeleteState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Delete operation state." + "Delete operation state." ::= { snL4VirtualServerPortCfgEntry 8 } @@ -2733,7 +2734,7 @@ snL4VirtualServerStatisticEntry OBJECT-TYPE ::= { snL4VirtualServerStatisticTable 1 } SnL4VirtualServerStatisticEntry ::= SEQUENCE { - snL4VirtualServerStatisticIP + snL4VirtualServerStatisticIP IpAddress, snL4VirtualServerStatisticName L4ServerName, @@ -2786,7 +2787,7 @@ snL4VirtualServerStatisticReceivePkts OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 3 } snL4VirtualServerStatisticTransmitPkts OBJECT-TYPE @@ -2794,7 +2795,7 @@ snL4VirtualServerStatisticTransmitPkts OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 4 } snL4VirtualServerStatisticTotalConnections OBJECT-TYPE @@ -2802,7 +2803,7 @@ snL4VirtualServerStatisticTotalConnections OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 5 } snL4VirtualServerStatisticReceiveBytes OBJECT-TYPE @@ -2810,7 +2811,7 @@ snL4VirtualServerStatisticReceiveBytes OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 6 } snL4VirtualServerStatisticTransmitBytes OBJECT-TYPE @@ -2818,7 +2819,7 @@ snL4VirtualServerStatisticTransmitBytes OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 7 } snL4VirtualServerStatisticSymmetricState OBJECT-TYPE @@ -2826,7 +2827,7 @@ snL4VirtualServerStatisticSymmetricState OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 8 } snL4VirtualServerStatisticSymmetricPriority OBJECT-TYPE @@ -2834,7 +2835,7 @@ snL4VirtualServerStatisticSymmetricPriority OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 9 } snL4VirtualServerStatisticSymmetricKeep OBJECT-TYPE @@ -2842,7 +2843,7 @@ snL4VirtualServerStatisticSymmetricKeep OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 10 } snL4VirtualServerStatisticSymmetricActivates OBJECT-TYPE @@ -2850,7 +2851,7 @@ snL4VirtualServerStatisticSymmetricActivates OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 11 } snL4VirtualServerStatisticSymmetricInactives OBJECT-TYPE @@ -2858,7 +2859,7 @@ snL4VirtualServerStatisticSymmetricInactives OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 12 } snL4VirtualServerStatisticSymmetricBestStandbyMacAddr OBJECT-TYPE @@ -2866,7 +2867,7 @@ snL4VirtualServerStatisticSymmetricBestStandbyMacAddr OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 13 } snL4VirtualServerStatisticSymmetricActiveMacAddr OBJECT-TYPE @@ -2874,7 +2875,7 @@ snL4VirtualServerStatisticSymmetricActiveMacAddr OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "" + "" ::= { snL4VirtualServerStatisticEntry 14 } @@ -2898,7 +2899,7 @@ snL4RealServerStatisticEntry OBJECT-TYPE ::= { snL4RealServerStatisticTable 1 } SnL4RealServerStatisticEntry ::= SEQUENCE { - snL4RealServerStatisticRealIP + snL4RealServerStatisticRealIP IpAddress, snL4RealServerStatisticName L4ServerName, @@ -3305,7 +3306,7 @@ snL4GslbSiteRemoteServerIronTable OBJECT-TYPE ::= { snL4GslbSiteRemoteServerIrons 1 } snL4GslbSiteRemoteServerIronEntry OBJECT-TYPE - SYNTAX SnL4GslbSiteRemoteServerIronEntry + SYNTAX SnL4GslbSiteRemoteServerIronEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -3391,19 +3392,19 @@ snL4RealServerHistoryControlEntry OBJECT-TYPE ::= { snL4RealServerHistoryControlTable 1 } SnL4RealServerHistoryControlEntry ::= SEQUENCE { - snL4RealServerHistoryControlIndex + snL4RealServerHistoryControlIndex INTEGER , - snL4RealServerHistoryControlDataSource + snL4RealServerHistoryControlDataSource OBJECT IDENTIFIER, snL4RealServerHistoryControlBucketsRequested INTEGER , - snL4RealServerHistoryControlBucketsGranted + snL4RealServerHistoryControlBucketsGranted INTEGER , - snL4RealServerHistoryControlInterval + snL4RealServerHistoryControlInterval INTEGER , - snL4RealServerHistoryControlOwner + snL4RealServerHistoryControlOwner DisplayString, - snL4RealServerHistoryControlStatus + snL4RealServerHistoryControlStatus INTEGER } @@ -3427,12 +3428,12 @@ snL4RealServerHistoryControlDataSource OBJECT-TYPE which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHistoryControlEntry.This source can be any - real/virtual server and real/virtual server port on + real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify - the instance of the object, defined in the above + the instance of the object, defined in the above statistics tables. - + This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1)." ::= { snL4RealServerHistoryControlEntry 2 } @@ -3446,7 +3447,7 @@ snL4RealServerHistoryControlBucketsRequested OBJECT-TYPE over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. - + When this object is created or modified, the probe should set snL4RealServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe @@ -3463,7 +3464,7 @@ snL4RealServerHistoryControlBucketsGranted OBJECT-TYPE over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryControlEntry. - + When the associated snL4RealServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested @@ -3472,19 +3473,19 @@ snL4RealServerHistoryControlBucketsGranted OBJECT-TYPE probe must not lower this value except as a result of a modification to the associated snL4RealServerHistoryControlBucketsRequested object. - + There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. - + When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. - + When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this @@ -3492,7 +3493,7 @@ snL4RealServerHistoryControlBucketsGranted OBJECT-TYPE entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. - + When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to @@ -3510,7 +3511,7 @@ snL4RealServerHistoryControlInterval OBJECT-TYPE snL4RealServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). - + Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow @@ -3520,7 +3521,7 @@ snL4RealServerHistoryControlInterval OBJECT-TYPE the snL4RealServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any - media-specific table. + media-specific table. This object may not be modified if the associated snL4RealServerHistoryControlStatus object is equal to valid(1)." DEFVAL { 1800 } @@ -3536,7 +3537,7 @@ snL4RealServerHistoryControlOwner OBJECT-TYPE ::= { snL4RealServerHistoryControlEntry 6 } snL4RealServerHistoryControlStatus OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { valid(1), createRequest(2), underCreation(3), @@ -3580,11 +3581,11 @@ snL4RealServerHistoryEntry OBJECT-TYPE ::= { snL4RealServerHistoryTable 1 } SnL4RealServerHistoryEntry ::= SEQUENCE { - snL4RealServerHistoryIndex + snL4RealServerHistoryIndex INTEGER , - snL4RealServerHistorySampleIndex + snL4RealServerHistorySampleIndex INTEGER , - snL4RealServerHistoryIntervalStart + snL4RealServerHistoryIntervalStart TimeTicks, snL4RealServerHistoryReceivePkts Counter32, @@ -3716,19 +3717,19 @@ snL4RealServerPortHistoryControlEntry OBJECT-TYPE ::= { snL4RealServerPortHistoryControlTable 1 } SnL4RealServerPortHistoryControlEntry ::= SEQUENCE { - snL4RealServerPortHistoryControlIndex + snL4RealServerPortHistoryControlIndex INTEGER , - snL4RealServerPortHistoryControlDataSource + snL4RealServerPortHistoryControlDataSource OBJECT IDENTIFIER, snL4RealServerPortHistoryControlBucketsRequested INTEGER , - snL4RealServerPortHistoryControlBucketsGranted + snL4RealServerPortHistoryControlBucketsGranted INTEGER, - snL4RealServerPortHistoryControlInterval + snL4RealServerPortHistoryControlInterval INTEGER , - snL4RealServerPortHistoryControlOwner + snL4RealServerPortHistoryControlOwner DisplayString, - snL4RealServerPortHistoryControlStatus + snL4RealServerPortHistoryControlStatus INTEGER } @@ -3752,12 +3753,12 @@ snL4RealServerPortHistoryControlDataSource OBJECT-TYPE which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPortHistoryControlEntry.This source can be any - real/virtual server and real/virtual server port on + real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify - the instance of the object, defined in the above + the instance of the object, defined in the above statistics tables. - + This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1)." ::= { snL4RealServerPortHistoryControlEntry 2 } @@ -3771,7 +3772,7 @@ snL4RealServerPortHistoryControlBucketsRequested OBJECT-TYPE over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. - + When this object is created or modified, the probe should set snL4RealServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe @@ -3788,7 +3789,7 @@ snL4RealServerPortHistoryControlBucketsGranted OBJECT-TYPE over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistoryControlEntry. - + When the associated snL4RealServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested @@ -3797,19 +3798,19 @@ snL4RealServerPortHistoryControlBucketsGranted OBJECT-TYPE probe must not lower this value except as a result of a modification to the associated snL4RealServerPortHistoryControlBucketsRequested object. - + There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. - + When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4RealServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. - + When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this @@ -3817,7 +3818,7 @@ snL4RealServerPortHistoryControlBucketsGranted OBJECT-TYPE entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. - + When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to @@ -3835,7 +3836,7 @@ snL4RealServerPortHistoryControlInterval OBJECT-TYPE snL4RealServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). - + Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow @@ -3845,7 +3846,7 @@ snL4RealServerPortHistoryControlInterval OBJECT-TYPE the snL4RealServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any - media-specific table. + media-specific table. This object may not be modified if the associated snL4RealServerPortHistoryControlStatus object is equal to valid(1)." DEFVAL { 1800 } @@ -3861,7 +3862,7 @@ snL4RealServerPortHistoryControlOwner OBJECT-TYPE ::= { snL4RealServerPortHistoryControlEntry 6 } snL4RealServerPortHistoryControlStatus OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { valid(1), createRequest(2), underCreation(3), @@ -3905,11 +3906,11 @@ snL4RealServerPortHistoryEntry OBJECT-TYPE ::= { snL4RealServerPortHistoryTable 1 } SnL4RealServerPortHistoryEntry ::= SEQUENCE { - snL4RealServerPortHistoryIndex + snL4RealServerPortHistoryIndex INTEGER , - snL4RealServerPortHistorySampleIndex + snL4RealServerPortHistorySampleIndex INTEGER , - snL4RealServerPortHistoryIntervalStart + snL4RealServerPortHistoryIntervalStart TimeTicks, snL4RealServerPortHistoryReceivePkts Counter32, @@ -4041,19 +4042,19 @@ snL4VirtualServerHistoryControlEntry OBJECT-TYPE ::= { snL4VirtualServerHistoryControlTable 1 } SnL4VirtualServerHistoryControlEntry ::= SEQUENCE { - snL4VirtualServerHistoryControlIndex + snL4VirtualServerHistoryControlIndex INTEGER , - snL4VirtualServerHistoryControlDataSource + snL4VirtualServerHistoryControlDataSource OBJECT IDENTIFIER, snL4VirtualServerHistoryControlBucketsRequested INTEGER , - snL4VirtualServerHistoryControlBucketsGranted + snL4VirtualServerHistoryControlBucketsGranted INTEGER , - snL4VirtualServerHistoryControlInterval + snL4VirtualServerHistoryControlInterval INTEGER , - snL4VirtualServerHistoryControlOwner + snL4VirtualServerHistoryControlOwner DisplayString, - snL4VirtualServerHistoryControlStatus + snL4VirtualServerHistoryControlStatus INTEGER } @@ -4077,12 +4078,12 @@ snL4VirtualServerHistoryControlDataSource OBJECT-TYPE which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerHistoryControlEntry.This source can be any - real/virtual server and real/virtual server port on + real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify - the instance of the object, defined in the above + the instance of the object, defined in the above statistics tables. - + This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1)." ::= { snL4VirtualServerHistoryControlEntry 2 } @@ -4096,7 +4097,7 @@ snL4VirtualServerHistoryControlBucketsRequested OBJECT-TYPE over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. - + When this object is created or modified, the probe should set snL4VirtualServerHistoryControlBucketsGranted as closely to this object as is possible for the particular probe @@ -4113,7 +4114,7 @@ snL4VirtualServerHistoryControlBucketsGranted OBJECT-TYPE over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryControlEntry. - + When the associated snL4VirtualServerHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested @@ -4122,19 +4123,19 @@ snL4VirtualServerHistoryControlBucketsGranted OBJECT-TYPE probe must not lower this value except as a result of a modification to the associated snL4VirtualServerHistoryControlBucketsRequested object. - + There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. - + When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. - + When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this @@ -4142,7 +4143,7 @@ snL4VirtualServerHistoryControlBucketsGranted OBJECT-TYPE entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. - + When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to @@ -4160,7 +4161,7 @@ snL4VirtualServerHistoryControlInterval OBJECT-TYPE snL4VirtualServerHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). - + Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow @@ -4170,7 +4171,7 @@ snL4VirtualServerHistoryControlInterval OBJECT-TYPE the snL4VirtualServerHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any - media-specific table. + media-specific table. This object may not be modified if the associated snL4VirtualServerHistoryControlStatus object is equal to valid(1)." DEFVAL { 1800 } @@ -4186,7 +4187,7 @@ snL4VirtualServerHistoryControlOwner OBJECT-TYPE ::= { snL4VirtualServerHistoryControlEntry 6 } snL4VirtualServerHistoryControlStatus OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { valid(1), createRequest(2), underCreation(3), @@ -4230,11 +4231,11 @@ snL4VirtualServerHistoryEntry OBJECT-TYPE ::= { snL4VirtualServerHistoryTable 1 } SnL4VirtualServerHistoryEntry ::= SEQUENCE { - snL4VirtualServerHistoryIndex + snL4VirtualServerHistoryIndex INTEGER, - snL4VirtualServerHistorySampleIndex + snL4VirtualServerHistorySampleIndex INTEGER, - snL4VirtualServerHistoryIntervalStart + snL4VirtualServerHistoryIntervalStart TimeTicks, snL4VirtualServerHistoryReceivePkts Counter32, @@ -4357,19 +4358,19 @@ snL4VirtualServerPortHistoryControlEntry OBJECT-TYPE ::= { snL4VirtualServerPortHistoryControlTable 1 } SnL4VirtualServerPortHistoryControlEntry ::= SEQUENCE { - snL4VirtualServerPortHistoryControlIndex + snL4VirtualServerPortHistoryControlIndex INTEGER, - snL4VirtualServerPortHistoryControlDataSource + snL4VirtualServerPortHistoryControlDataSource OBJECT IDENTIFIER, snL4VirtualServerPortHistoryControlBucketsRequested INTEGER, - snL4VirtualServerPortHistoryControlBucketsGranted + snL4VirtualServerPortHistoryControlBucketsGranted INTEGER, - snL4VirtualServerPortHistoryControlInterval + snL4VirtualServerPortHistoryControlInterval INTEGER, - snL4VirtualServerPortHistoryControlOwner + snL4VirtualServerPortHistoryControlOwner DisplayString, - snL4VirtualServerPortHistoryControlStatus + snL4VirtualServerPortHistoryControlStatus INTEGER } @@ -4393,12 +4394,12 @@ snL4VirtualServerPortHistoryControlDataSource OBJECT-TYPE which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerPortHistoryControlEntry.This source can be any - real/virtual server and real/virtual server port on + real/virtual server and real/virtual server port on this ServerIron. In order to identify a particular instance, this object shall identify - the instance of the object, defined in the above + the instance of the object, defined in the above statistics tables. - + This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1)." ::= { snL4VirtualServerPortHistoryControlEntry 2 } @@ -4412,7 +4413,7 @@ snL4VirtualServerPortHistoryControlBucketsRequested OBJECT-TYPE over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. - + When this object is created or modified, the probe should set snL4VirtualServerPortHistoryControlBucketsGranted as closely to this object as is possible for the particular probe @@ -4429,7 +4430,7 @@ snL4VirtualServerPortHistoryControlBucketsGranted OBJECT-TYPE over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHistoryControlEntry. - + When the associated snL4VirtualServerPortHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested @@ -4438,19 +4439,19 @@ snL4VirtualServerPortHistoryControlBucketsGranted OBJECT-TYPE probe must not lower this value except as a result of a modification to the associated snL4VirtualServerPortHistoryControlBucketsRequested object. - + There will be times when the actual number of buckets associated with this entry is less than the value of this object.In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. - + When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this snL4VirtualServerPortHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. - + When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this @@ -4458,7 +4459,7 @@ snL4VirtualServerPortHistoryControlBucketsGranted OBJECT-TYPE entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. - + When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to @@ -4476,7 +4477,7 @@ snL4VirtualServerPortHistoryControlInterval OBJECT-TYPE snL4VirtualServerPortHistoryControlEntry.This interval can be set to any number of seconds between 1 and 3600 (1 hour). - + Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow @@ -4486,7 +4487,7 @@ snL4VirtualServerPortHistoryControlInterval OBJECT-TYPE the snL4VirtualServerPortHistoryControlInterval object to a value less than this interval.This is typically most important for the 'octets' counter in any - media-specific table. + media-specific table. This object may not be modified if the associated snL4VirtualServerPortHistoryControlStatus object is equal to valid(1)." DEFVAL { 1800 } @@ -4502,7 +4503,7 @@ snL4VirtualServerPortHistoryControlOwner OBJECT-TYPE ::= { snL4VirtualServerPortHistoryControlEntry 6 } snL4VirtualServerPortHistoryControlStatus OBJECT-TYPE - SYNTAX INTEGER { + SYNTAX INTEGER { valid(1), createRequest(2), underCreation(3), @@ -4546,11 +4547,11 @@ snL4VirtualServerPortHistoryEntry OBJECT-TYPE ::= { snL4VirtualServerPortHistoryTable 1 } SnL4VirtualServerPortHistoryEntry ::= SEQUENCE { - snL4VirtualServerPortHistoryIndex + snL4VirtualServerPortHistoryIndex INTEGER , - snL4VirtualServerPortHistorySampleIndex + snL4VirtualServerPortHistorySampleIndex INTEGER, - snL4VirtualServerPortHistoryIntervalStart + snL4VirtualServerPortHistoryIntervalStart TimeTicks, snL4VirtualServerPortHistoryReceivePkts Counter32, diff --git a/foundry/FOUNDRY-SN-SWITCH-GROUP-MIB.mib b/foundry/FOUNDRY-SN-SWITCH-GROUP-MIB.mib index f9d557177..27f92874e 100644 --- a/foundry/FOUNDRY-SN-SWITCH-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-SWITCH-GROUP-MIB.mib @@ -7,46 +7,47 @@ IMPORTS FROM FOUNDRY-SN-ROOT-MIB DisplayString,MacAddress FROM FOUNDRY-SN-AGENT-MIB - InterfaceIndex, ifIndex, InterfaceIndexOrZero - FROM IF-MIB - TruthValue,TEXTUAL-CONVENTION - FROM SNMPv2-TC - EnabledStatus - FROM P-BRIDGE-MIB; - + InterfaceIndex, ifIndex + FROM IF-MIB + RowStatus, TruthValue,TEXTUAL-CONVENTION + FROM SNMPv2-TC + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB -- [RFC 4001] + EnabledStatus + FROM P-BRIDGE-MIB; + + snSwitch MODULE-IDENTITY - LAST-UPDATED "201310250000Z" -- 25 October 2013 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201310250000Z" -- 25 October 2013 - DESCRIPTION - "Changed the DESCRIPTION field of snSwIfInfoMonitorMode object." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " REVISION "200909300000Z" -- September 30, 2009 DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { switch 3 } -- textual conventions @@ -54,6 +55,7 @@ snSwitch MODULE-IDENTITY PhysAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" STATUS current DESCRIPTION " @@ -84,8 +86,8 @@ snSwitch MODULE-IDENTITY STATUS current DESCRIPTION " - This data type is used to model port bitmask. The - maximum of ports are 32. + This data type is used to model port bitmask. The + maximum of ports are 32. " SYNTAX Integer32 @@ -132,12 +134,12 @@ snSwitch MODULE-IDENTITY -- e.g. 11.3 is trunk id 3 -- -- virtual management(12), format: type - -- e.g. 10 is the virtual management interface + -- e.g. 10 is the virtual management interface " SYNTAX OBJECT IDENTIFIER - - + + InterfaceId2 ::= TEXTUAL-CONVENTION STATUS current @@ -211,7 +213,7 @@ snSwitch MODULE-IDENTITY -- e.g. 11.3 is trunk id 3 -- -- virtual management(12), format: type - -- e.g. 12 is the virtual management interface + -- e.g. 12 is the virtual management interface " SYNTAX OBJECT IDENTIFIER @@ -225,7 +227,7 @@ VlanTagMode ::= TEXTUAL-CONVENTION dual(3) } -FdryVlanIdOrNoneTC ::= TEXTUAL-CONVENTION + FdryVlanIdOrNoneTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION @@ -238,7 +240,7 @@ FdryVlanIdOrNoneTC ::= TEXTUAL-CONVENTION Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0)." - SYNTAX Integer32 (0 | 1..4095) + SYNTAX Integer32 (0 | 1..4094) BrcdVlanIdTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" @@ -271,7 +273,6 @@ PortQosTC ::= TEXTUAL-CONVENTION invalid(127) } - PortPriorityTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION @@ -290,9 +291,9 @@ PortPriorityTC ::= TEXTUAL-CONVENTION nonPriority (128) } - -- Groups +-- some OIDs are commented here due to the duplicate OID issue for certain SNMP tools (FI-247705) snSwInfo OBJECT IDENTIFIER ::= { snSwitch 1 } snVLanInfo OBJECT IDENTIFIER ::= { snSwitch 2 } snSwPortInfo OBJECT IDENTIFIER ::= { snSwitch 3 } @@ -308,32 +309,37 @@ snRadius OBJECT IDENTIFIER ::= { snSwitch 12 } snTacacs OBJECT IDENTIFIER ::= { snSwitch 13 } snQos OBJECT IDENTIFIER ::= { snSwitch 14 } snAAA OBJECT IDENTIFIER ::= { snSwitch 15 } -snCAR OBJECT IDENTIFIER ::= { snSwitch 16 } +--snCAR OBJECT IDENTIFIER ::= { snSwitch 16 } snVLanCAR OBJECT IDENTIFIER ::= { snSwitch 17 } snNetFlow OBJECT IDENTIFIER ::= { snSwitch 18 } snSFlow OBJECT IDENTIFIER ::= { snSwitch 19 } snFDP OBJECT IDENTIFIER ::= { snSwitch 20 } -snVsrp OBJECT IDENTIFIER ::= { snSwitch 21 } +--snVsrp OBJECT IDENTIFIER ::= { snSwitch 21 } snArpInfo OBJECT IDENTIFIER ::= { snSwitch 22 } -snWireless OBJECT IDENTIFIER ::= { snSwitch 23 } +--snWireless OBJECT IDENTIFIER ::= { snSwitch 23 } snMac OBJECT IDENTIFIER ::= { snSwitch 24 } snPortMonitor OBJECT IDENTIFIER ::= { snSwitch 25 } snSSH OBJECT IDENTIFIER ::= { snSwitch 26 } snSSL OBJECT IDENTIFIER ::= { snSwitch 27 } snMacAuth OBJECT IDENTIFIER ::= { snSwitch 28 } -snMetroRing OBJECT IDENTIFIER ::= { snSwitch 29 } +--snMetroRing OBJECT IDENTIFIER ::= { snSwitch 29 } -- snSwitch 30 should not be used -snStacking OBJECT IDENTIFIER ::= { snSwitch 31 } +--snStacking OBJECT IDENTIFIER ::= { snSwitch 31 } fdryMacVlanMIB OBJECT IDENTIFIER ::= { snSwitch 32 } -fdryLinkAggregationGroupMIB OBJECT IDENTIFIER ::= { snSwitch 33 } -fdryDns2MIB OBJECT IDENTIFIER ::= { snSwitch 34 } -fdryDaiMIB OBJECT IDENTIFIER ::= { snSwitch 35 } -fdryDhcpSnoopMIB OBJECT IDENTIFIER ::= { snSwitch 36 } -fdryIpSrcGuardMIB OBJECT IDENTIFIER ::= { snSwitch 37 } --- snSwitch 38 used for brcdDot1xAuth MIB +--fdryLinkAggregationGroupMIB OBJECT IDENTIFIER ::= { snSwitch 33 } +--fdryDns2MIB OBJECT IDENTIFIER ::= { snSwitch 34 } +--fdryDaiMIB OBJECT IDENTIFIER ::= { snSwitch 35 } +--fdryDhcpSnoopMIB OBJECT IDENTIFIER ::= { snSwitch 36 } +--fdryIpSrcGuardMIB OBJECT IDENTIFIER ::= { snSwitch 37 } --brcdDot1xAuth OBJECT IDENTIFIER ::= { snSwitch 38 } brcdRouteMap OBJECT IDENTIFIER ::= { snSwitch 39 } brcdSPXMIB OBJECT IDENTIFIER ::= { snSwitch 40 } +--brcdStackISSUMIB OBJECT IDENTIFIER ::= { snSwitch 41 } +--ruckusWiredClientMIB OBJECT IDENTIFIER ::= { snSwitch 43 } +--ruckusAclMIB OBJECT IDENTIFIER ::= { snSwitch 45 } +--ruckusDhcpClientMIB OBJECT IDENTIFIER ::= { snSwitch 46 } +--ruckusNdiMIB OBJECT IDENTIFIER ::= { snSwitch 47 } +--ruckusDhcpv6SnoopMIB OBJECT IDENTIFIER ::= { snSwitch 48 } -- SECTION 2: Switch Group Configuration MIBs @@ -347,15 +353,15 @@ snSwGroupOperMode OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "noVLan(1) represents all switch ports with no virtual + "noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. - vlanByPort(2) represents all switch ports with Basic + vlanByPort(2) represents all switch ports with Basic VLAN (layer2 Switch). " ::= { snSwInfo 1 } snSwGroupIpL3SwMode OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write @@ -365,26 +371,27 @@ snSwGroupIpL3SwMode OBJECT-TYPE IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 IP Switch - disabled(0)..........disable Layer3 IP Switch" + disabled(0)..........disable Layer3 IP Switch" ::= { snSwInfo 2 } snSwGroupIpMcastMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + active(1), + passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION - "The Switch Group is configured with the IP Multicast - pruning mode either enabled or disabled and the + "The Switch Group is configured with the IP Multicast (IGMP snooping) + mode either enabled (active or passive) or disabled and the default is disabled mode. - enabled(1)...........activate IP Multicast pruning - disabled(0)..........no IP Multicast pruning" + disabled(0)......IP Multicast is disabled + active(1)........this device generates IGMP queries, IP Multicast is enabled + passive(2).......this device listens for IGMP packets, IP Multicast is enabled" ::= { snSwInfo 3 } - snSwGroupDefaultCfgMode OBJECT-TYPE SYNTAX INTEGER { default(1), @@ -406,14 +413,10 @@ snSwGroupSwitchAgeTime OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "For FastIron: Sets the aging period for ports on the device, defining how long a port + "Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 seconds - Default: 300 seconds. - For NetIron: The Switch Age time is 180sec by default. - The configured range is 10 to 10,000sec. The time - represents the time span to age out an MAC Address - entry." + Default: 300 seconds." ::= { snSwInfo 5 } @@ -423,7 +426,7 @@ snVLanGroupVlanCurEntry OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The current total entry number of VLANs are configured." + "The current total entry number of VLANs are configured." ::= { snSwInfo 6 } @@ -433,18 +436,18 @@ snVLanGroupSetAllVLan OBJECT-TYPE STATUS current DESCRIPTION "The value of this object is the VLanIndex of a particalur - entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). + entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except PortMask - will be used to set the same attributes for the - entire VLan group. VLanId and PortMask must be set for + will be used to set the same attributes for the + entire VLan group. VLanId and PortMask must be set for that particular entry prior to setting this object. Switch software will base on that VLAN information - to set the entire VLAN. - Note: All the intended attributes of the given + to set the entire VLAN. + Note: All the intended attributes of the given row of the table (given VLAN) must be set prior setting this object. When this object is set, Set-All-VLAN action will take place simultaneously. - The previous setting will be overwritten by the + The previous setting will be overwritten by the new one." ::= { snSwInfo 7 } @@ -455,18 +458,18 @@ snSwPortSetAll OBJECT-TYPE STATUS current DESCRIPTION "The value of this object is the index number of the - snSwPortInfoTable (snSwPortInfoPortIndex). - snSwPortInfoMonitorMode, snSwPortInfoTagMode, + snSwPortInfoTable (snSwPortInfoPortIndex). + snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMode, snSwPortInfoSpeed, snSwPortInfoAdminStatus are all the read-write attributes of that row of table. They will be used to set the same attributes for all the ports in the system. - Note: prior setting this object, all the intended - attributes of the given row of the table must be set. - Otherwise, the current data of the row will be used to + Note: prior setting this object, all the intended + attributes of the given row of the table must be set. + Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will - be overwritten by the new one." + be overwritten by the new one." ::= { snSwInfo 8 } @@ -476,7 +479,7 @@ snFdbTableCurEntry OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The current total entry number of FDB are configured." + "The current total entry number of FDB are configured." ::= { snSwInfo 9 } @@ -497,7 +500,7 @@ snFdbTableStationFlush OBJECT-TYPE flushing(4)... in process The following value can be written: - flush(3).....do flush + flush(3).....do flush The agent will return a response even before the flush is done. And the read value will be flushing until flush is done. @@ -511,16 +514,16 @@ snPortStpSetAll OBJECT-TYPE STATUS current DESCRIPTION "The value of this object is 1 which means invoking - Port STP Set-all command. The snPortStpPriority, - snPortStpPathCost, the read-write STP related - attributes of the first row of table will be used - to set the same attributes for all the ports in the - system. - Note: prior setting this object, all the intended - attributes of the given row of the table must be set. - Otherwise, the current data of the row will be used to + Port STP Set-all command. The snPortStpPriority, + snPortStpPathCost, the read-write STP related + attributes of the first row of table will be used + to set the same attributes for all the ports in the + system. + Note: prior setting this object, all the intended + attributes of the given row of the table must be set. + Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will - be overwritten by the new one." + be overwritten by the new one." ::= { snSwInfo 11 } @@ -531,9 +534,9 @@ snSwProbePortNum OBJECT-TYPE DESCRIPTION "A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. - The bit 0 to bit 7: port number. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. - A stackable switch is only assigned with one probe port as a + A stackable switch is only assigned with one probe port as a traffic analyzer." ::= { snSwInfo 12 } @@ -557,13 +560,13 @@ snSw8021qTagMode OBJECT-TYPE snSwGlobalStpMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION - "Spanning Tree System Global Mode in the Switch Group - can be set either enabled or disabled and the default is + "Spanning Tree System Global Mode in the Switch Group + can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree" @@ -578,12 +581,12 @@ snSwIpMcastQuerierMode OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The IP Multicast pruning mode is configured either - Non-Querier or Querier mode and the default is + "The IP Multicast pruning mode is configured either + Non-Querier or Querier mode and the default is querier mode. - querier(1)...........when prunning traffic locally + querier(1)...........when prunning traffic locally within the VLAN. - nonQuerier(2)........when running with a multicast + nonQuerier(2)........when running with a multicast capable router in the network." ::= { snSwInfo 15 } @@ -595,7 +598,7 @@ snSwViolatorPortNumber OBJECT-TYPE "The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. - The bit 0 to bit 7: port number. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only)." ::= { snSwInfo 17 } @@ -614,11 +617,7 @@ snVLanGroupVlanMaxEntry OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The maximum number of VLAN entries that are allowed to configure. - - On NetIron products, This object will be implemented as read-only. - Set request will be returned with not writable error. - To set the maximum allowed vlan, use snAgentSysParaConfigEntry." + "The maximum number of VLAN entries are allowed to configure." ::= { snSwInfo 19 } snSwEosBufferSize OBJECT-TYPE @@ -630,15 +629,15 @@ snSwEosBufferSize OBJECT-TYPE ::= { snSwInfo 20 } snVLanByPortEntrySize OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The size of each VLAN table entry." ::= { snSwInfo 21 } snSwPortEntrySize OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -646,7 +645,7 @@ snSwPortEntrySize OBJECT-TYPE ::= { snSwInfo 22 } snFdbStationEntrySize OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -654,7 +653,7 @@ snFdbStationEntrySize OBJECT-TYPE ::= { snSwInfo 23 } snPortStpEntrySize OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -685,7 +684,7 @@ snSwEnableBridgeTopoChangeTrap OBJECT-TYPE snSwEnableLockedAddrViolationTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Indicates whether the SNMP agent process is permitted to generate locked address violation @@ -695,21 +694,21 @@ snSwEnableLockedAddrViolationTrap OBJECT-TYPE snSwIpxL3SwMode OBJECT-TYPE SYNTAX INTEGER { - disabled(0), + disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Switch Group is configured with the Layer3 - IPX Switch mode either enabled or disabled and + IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 Switch - disabled(0)..........disable Layer3 Switch" + disabled(0)..........disable Layer3 Switch" ::= { snSwInfo 28 } snVLanByIpSubnetMaxSubnets OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -717,7 +716,7 @@ snVLanByIpSubnetMaxSubnets OBJECT-TYPE ::= { snSwInfo 29 } snVLanByIpxNetMaxNetworks OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -732,7 +731,7 @@ snSwProtocolVLanMode OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "disabled(0) - represents system with Protocol VLAN disabled. + "disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN)." ::= { snSwInfo 31 } @@ -762,7 +761,7 @@ snSwClearCounters OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "valid(0) - a SNMP-GET of this mib shows that it is valid command to use. + "valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP and IPX counters for all ports." ::= { snSwInfo 33 } @@ -781,18 +780,17 @@ snSw8021qTagType OBJECT-TYPE snSwBroadcastLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS obsolete DESCRIPTION "Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of 0 to this object - disables the limitation check. This object is deprecated by - snSwBroadcastLimit2 on NI platform." + disables the limitation check." DEFVAL { 0 } ::= { snSwInfo 35 } snSwMaxMacFilterPerSystem OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -800,7 +798,7 @@ snSwMaxMacFilterPerSystem OBJECT-TYPE ::= { snSwInfo 36 } snSwMaxMacFilterPerPort OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -845,8 +843,7 @@ snSwQosMechanism OBJECT-TYPE STATUS current DESCRIPTION "Indicates whether the qos mechanism is - strict or weighted. This object is not - supported on NI platform." + strict or weighted." DEFVAL { weighted } ::= { snSwInfo 40 } @@ -859,8 +856,8 @@ snSwSingleStpMode OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Single Spanning Tree System Mode in the Switch Group - can be set either enabled or disabled and the default is + "Single Spanning Tree System Mode in the Switch Group + can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spanning Tree enableStp(1).........activate SSTP control vlan to run Spanning Tree @@ -870,13 +867,13 @@ snSwSingleStpMode OBJECT-TYPE snSwFastStpMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), - enabled(1) + enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION - "Fast Spanning Tree System Mode in the Switch Group - can be set either enabled or disabled and the default is + "Fast Spanning Tree System Mode in the Switch Group + can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree" @@ -885,7 +882,7 @@ snSwFastStpMode OBJECT-TYPE snSwViolatorIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The port number of the switch or router that received a violator packet. It is included in the locked @@ -902,16 +899,107 @@ snSwSingleStpVLanId OBJECT-TYPE Single Spanning Tree was disabled." ::= { snSwInfo 44 } -snSwBroadcastLimit2 OBJECT-TYPE +snSwJumboMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The jumbo mode on the Switch can be set either enabled or disabled + and the default is disabled mode. The jumbo frame (10200 bytes) can + be supported if this mode is enabled. Please note that enabling/disabling + jumbo mode will be effected only after saving configuration and system reload . + disabled(0)..........disable jumbo mode + enabled(1)...........enable jumbo mode" + ::= { snSwInfo 45 } + +snSwACLPerPortPerVlanMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ACL Per port per VLAN mode on the Switch + can be set either enabled or disabled and the default is + disabled mode. Allow the access list on selective ports + of VLAN or VE if this mode is enabled. Please note that + enabling/disabling ACL Per port per VLAN will be effected + only after saving configuration and system reload + disabled(0)..........disable ACL per port per VLAN + enabled(1)...........enable ACL per port per VLAN" + ::= { snSwInfo 46 } + +snSwIpMcastVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Multicast version at the globle level can be set + 2 or 3, and the default is 2" + ::= { snSwInfo 47 } + +snSwMgmtVlan OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN can be a part of the management VLAN. It dedicates + this VLAN for management purpose. + The value 0 means that the management VLAN is not configurated, + or is not applicable, e.g. in Router image" + ::= { snSwInfo 48 } + +snSwErrDisableRecoveryTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION - "Limit the number of broadcast packets to forward out of the - switch ports. This object specifies the number of broadcast - packets per second." - DEFVAL { 4294967295 } - ::= { snSwInfo 45 } + "Configure the errdisable timeout value in second. + Valid values: 0 = default value, or 10 - 65535 seconds + Default: 300 seconds." + ::= { snSwInfo 49 } + +snSwErrDisableRecoveryCause OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure the errdisable cause support recovery. + Valid values: 0 = no recovery is supported, or other value, + bit 0 - Enable auto-recovery from all causes + bit 1 - Enable auto-recovery from BPDU guard + bit 2 - Enable auto-recovery from loop-detection + bit 4 - Enable auto-recovery from packet inError + bit 5 - Enable auto-recovery from LOAM remote critical event + bit 12 - Enable auto-recovery from pvstplus-protect + bit 13 - Enable auto-recovery from bpdu tunnel threshold + bit 14 - Enable auto-recovery from lag operational speed mismatch + Default: 0" + ::= { snSwInfo 50 } + +snSwFwdProfileNumber OBJECT-TYPE + SYNTAX INTEGER { + none(0), + profile1(1), + profile2(2), + profile3(3), + profile4(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tells us the current forwarding profile loaded on the ICX Unit. + Only Applicable for 7850 and 7550 + 0 - Forwarding Profile Not Supported on Unit + 1 - Forwarding Profile 1 is loaded + 2 - Forwarding Profile 2 is loaded + 3 - Forwarding Profile 3 is loaded + 4 - Forwarding Profile 4 is loaded" + ::= { snSwInfo 51 } -- VLAN Layer 2 Switch VLAN By Port Information Table @@ -934,14 +1022,14 @@ snVLanByPortEntry OBJECT-TYPE STATUS deprecated DESCRIPTION "An entry in the VLAN By Port Information table. - snVLanByPortVLanIndex = 1 and with + snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Global switch group i.e. noVLan. - A SNMP SET PDU for a row of the snVLanByPortTable - requires the entired sequence of the MIB Objects in each - snVLanByPortEntry stored in one PDU. Otherwise, + A SNMP SET PDU for a row of the snVLanByPortTable + requires the entired sequence of the MIB Objects in each + snVLanByPortEntry stored in one PDU. Otherwise, GENERR return-value will be returned." - INDEX { + INDEX { snVLanByPortVLanIndex } ::= { snVLanByPortTable 1 } @@ -958,33 +1046,33 @@ SnVLanByPortEntry ::= SEQUENCE { INTEGER, snVLanByPortStpMode INTEGER, - snVLanByPortStpPriority + snVLanByPortStpPriority INTEGER, - snVLanByPortStpGroupMaxAge + snVLanByPortStpGroupMaxAge INTEGER, - snVLanByPortStpGroupHelloTime + snVLanByPortStpGroupHelloTime INTEGER, - snVLanByPortStpGroupForwardDelay + snVLanByPortStpGroupForwardDelay INTEGER, - snVLanByPortRowStatus + snVLanByPortRowStatus INTEGER, snVLanByPortOperState INTEGER, snVLanByPortBaseNumPorts Integer32, snVLanByPortBaseType - INTEGER, - snVLanByPortStpProtocolSpecification + INTEGER, + snVLanByPortStpProtocolSpecification INTEGER, snVLanByPortStpMaxAge Timeout, - snVLanByPortStpHelloTime + snVLanByPortStpHelloTime Timeout, - snVLanByPortStpHoldTime + snVLanByPortStpHoldTime Integer32, - snVLanByPortStpForwardDelay + snVLanByPortStpForwardDelay Timeout, - snVLanByPortStpTimeSinceTopologyChange + snVLanByPortStpTimeSinceTopologyChange TimeTicks, snVLanByPortStpTopChanges Counter32, @@ -994,7 +1082,7 @@ SnVLanByPortEntry ::= SEQUENCE { Integer32, snVLanByPortStpDesignatedRoot BridgeId, - snVLanByPortBaseBridgeAddress + snVLanByPortBaseBridgeAddress MacAddress, snVLanByPortVLanName DisplayString, @@ -1011,19 +1099,19 @@ snVLanByPortVLanIndex OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "The VLAN ID index must not be greater than the - snVLanGroupVlanMaxEntry. Each VLAN Identifier can + "The VLAN ID index must not be greater than the + snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports." ::= { snVLanByPortEntry 1 } snVLanByPortVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) - MAX-ACCESS read-write + MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The VLAN ID index to the VLAN By Port Info Table. - Each VLAN Identifier can have a membership of multiple + Each VLAN Identifier can have a membership of multiple ports." ::= { snVLanByPortEntry 2 } @@ -1069,7 +1157,7 @@ snVLanByPortStpMode OBJECT-TYPE STATUS deprecated DESCRIPTION "Spanning Tree Mode in the Switch Group can be set - either enabled or disabled and the default is + either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree @@ -1081,10 +1169,10 @@ snVLanByPortStpPriority OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "dot1dStpPriority : The value of the write-able - portion of the Stp ID, i.e., the first two octets - of the (8 octet long) Bridge ID. The other (last) 6 - octets of the Bridge ID are given by the value of the + "dot1dStpPriority : The value of the write-able + portion of the Stp ID, i.e., the first two octets + of the (8 octet long) Bridge ID. The other (last) 6 + octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress." ::= { snVLanByPortEntry 6 } @@ -1094,9 +1182,9 @@ snVLanByPortStpGroupMaxAge OBJECT-TYPE STATUS deprecated DESCRIPTION "dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). - The value that all bridges use for MaxAge when - this bridge is acting as the root. - Note that 802.1D-1990 specifies that the + The value that all bridges use for MaxAge when + this bridge is acting as the root. + Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. @@ -1167,7 +1255,7 @@ snVLanByPortRowStatus OBJECT-TYPE snVLanByPortOperState OBJECT-TYPE SYNTAX INTEGER { - notActivated(0), + notActivated(0), activated(1) } MAX-ACCESS read-only @@ -1175,7 +1263,7 @@ snVLanByPortOperState OBJECT-TYPE DESCRIPTION "By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. - activated(1)......the VLAN entry is activated and in running mode" + activated(1)......the VLAN entry is activated and in running mode" ::= { snVLanByPortEntry 11 } snVLanByPortBaseNumPorts OBJECT-TYPE @@ -1310,7 +1398,7 @@ snVLanByPortStpRootCost OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "dot1dStpRootCost: From RFC1493(Bridge MIB). + "dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge." ::= { snVLanByPortEntry 21 } @@ -1384,8 +1472,8 @@ snVLanByPortChassisPortMask OBJECT-TYPE snVLanByPortPortList OBJECT-TYPE SYNTAX OCTET STRING - MAX-ACCESS read-write - STATUS deprecated + MAX-ACCESS read-only + STATUS deprecated DESCRIPTION "A list of port indices which are the port membership of a VLAN By Port. Each port index is a @@ -1421,7 +1509,7 @@ SnVLanByPortMemberEntry ::= SEQUENCE { INTEGER, snVLanByPortMemberPortId InterfaceIndex, - snVLanByPortMemberRowStatus + snVLanByPortMemberRowStatus INTEGER, snVLanByPortMemberTagMode INTEGER @@ -1459,7 +1547,7 @@ snVLanByPortMemberRowStatus OBJECT-TYPE that can be written are: delete(3)...deletes the row create(4)...creates a new row - + If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away @@ -1472,14 +1560,17 @@ snVLanByPortMemberRowStatus OBJECT-TYPE snVLanByPortMemberTagMode OBJECT-TYPE SYNTAX INTEGER { - tagged(1), + tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION - "For tagged/dual-mode port, we could have multiple VLANs per - port. For untagged port, there is only one VLAN ID per port." + "Configure an interface as tagged member of non-default VLAN, + untagged VLAN membership of the interface will not be modified, + be it is default-VLAN or non-default VLAN. Configure an interface + as untagged member of non-default VLAN, that interface will be + moved from default VLAN to the configured VLAN." ::= { snVLanByPortMemberEntry 4 } @@ -1513,29 +1604,29 @@ SnVLanByPortCfgEntry ::= SEQUENCE { PortQosTC, snVLanByPortCfgStpMode INTEGER, - snVLanByPortCfgStpPriority - INTEGER, - snVLanByPortCfgStpGroupMaxAge + snVLanByPortCfgStpPriority + INTEGER, + snVLanByPortCfgStpGroupMaxAge Integer32, - snVLanByPortCfgStpGroupHelloTime + snVLanByPortCfgStpGroupHelloTime Integer32, - snVLanByPortCfgStpGroupForwardDelay + snVLanByPortCfgStpGroupForwardDelay Integer32, snVLanByPortCfgBaseNumPorts Integer32, snVLanByPortCfgBaseType - INTEGER, - snVLanByPortCfgStpProtocolSpecification + INTEGER, + snVLanByPortCfgStpProtocolSpecification INTEGER, snVLanByPortCfgStpMaxAge Timeout, - snVLanByPortCfgStpHelloTime + snVLanByPortCfgStpHelloTime Timeout, - snVLanByPortCfgStpHoldTime + snVLanByPortCfgStpHoldTime Integer32, - snVLanByPortCfgStpForwardDelay + snVLanByPortCfgStpForwardDelay Timeout, - snVLanByPortCfgStpTimeSinceTopologyChange + snVLanByPortCfgStpTimeSinceTopologyChange TimeTicks, snVLanByPortCfgStpTopChanges Counter32, @@ -1545,7 +1636,7 @@ SnVLanByPortCfgEntry ::= SEQUENCE { Integer32, snVLanByPortCfgStpDesignatedRoot BridgeId, - snVLanByPortCfgBaseBridgeAddress + snVLanByPortCfgBaseBridgeAddress MacAddress, snVLanByPortCfgVLanName DisplayString, @@ -1557,8 +1648,12 @@ SnVLanByPortCfgEntry ::= SEQUENCE { INTEGER, snVLanByPortCfgInOctets Counter64, - snVLanByPortCfgTransparentHwFlooding - INTEGER + snVLanByPortCfgMcastMode + INTEGER, + snVLanByPortCfgMcastVersion + Integer32, + snVLanByPortCfgLoopDetectionMode + TruthValue } snVLanByPortCfgVLanId OBJECT-TYPE @@ -1594,7 +1689,7 @@ snVLanByPortCfgStpMode OBJECT-TYPE STATUS current DESCRIPTION "Spanning Tree Mode in the Switch Group can be set - either enabled or disabled and the default is + either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree @@ -1606,10 +1701,10 @@ snVLanByPortCfgStpPriority OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "dot1dStpPriority : The value of the write-able - portion of the Stp ID, i.e., the first two octets - of the (8 octet long) Bridge ID. The other (last) 6 - octets of the Bridge ID are given by the value of the + "dot1dStpPriority : The value of the write-able + portion of the Stp ID, i.e., the first two octets + of the (8 octet long) Bridge ID. The other (last) 6 + octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress." ::= { snVLanByPortCfgEntry 4 } @@ -1619,9 +1714,9 @@ snVLanByPortCfgStpGroupMaxAge OBJECT-TYPE STATUS current DESCRIPTION "dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). - The value that all bridges use for MaxAge when - this bridge is acting as the root. - Note that 802.1D-1990 specifies that the + The value that all bridges use for MaxAge when + this bridge is acting as the root. + Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. @@ -1799,7 +1894,7 @@ snVLanByPortCfgStpRootCost OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot1dStpRootCost: From RFC1493(Bridge MIB). + "dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge." ::= { snVLanByPortCfgEntry 17 } @@ -1870,9 +1965,7 @@ snVLanByPortCfgRowStatus OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Use this object to delete a vlan entry. - For read operation, its value is 'valid' if it is a user-configured VLAN and - 'other' if it is a control-VLAN." + "Use object to delete a vlan entry." ::= { snVLanByPortCfgEntry 23 } snVLanByPortCfgStpVersion OBJECT-TYPE @@ -1895,249 +1988,59 @@ snVLanByPortCfgStpVersion OBJECT-TYPE snVLanByPortCfgInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE." ::= { snVLanByPortCfgEntry 25 } -snVLanByPortCfgTransparentHwFlooding OBJECT-TYPE - SYNTAX INTEGER { disabled(0), enabled(1) } +snVLanByPortCfgMcastMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + active(1), + passive(2) + } MAX-ACCESS read-write STATUS current DESCRIPTION - "Specifies the transparent VLAN flooding feature." - DEFVAL { disabled } + "Multicast (IGMP snooping) mode on the VLAN can be set + either active or passive or disabled and the default is + disabled. + disabled(0)..... IP Multicast is disabled on this VLAN + active(1)........this VLAN generates IGMP queries + passive(2).......this VLAN listens for IGMP packets" ::= { snVLanByPortCfgEntry 26 } --- --- - -brcdVlanExtStatsTable OBJECT-TYPE - SYNTAX SEQUENCE OF BrcdVlanExtStatsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains the extended statistics for VLAN ports of G2 and - later modules. Not applicable for G1 cards. - These applies to L2 VLANs and as well as port VLANs that are - associated to IP interfaces (physical or VE)." - ::= { snVLanInfo 8 } - -brcdVlanExtStatsEntry OBJECT-TYPE - SYNTAX BrcdVlanExtStatsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A row in this table represents a VLAN extended statistics - accounting entry. It can be a per-VLAN/port entry, - in this case the Priority-ID is 128 (invalid). - It can also be in a priority level granularity of the VLAN port, - in this case the Priority-ID specifies which port QOS priority, - and Priority-ID 128 is the index to the aggregate count bucket." - INDEX {brcdVlanExtStatsVlanId, - brcdVlanExtStatsIfIndex, - brcdVlanExtStatsPriorityId } - ::= { brcdVlanExtStatsTable 1 } - -BrcdVlanExtStatsEntry ::= SEQUENCE { - brcdVlanExtStatsVlanId - BrcdVlanIdTC, - brcdVlanExtStatsIfIndex - InterfaceIndex, - brcdVlanExtStatsPriorityId - PortPriorityTC, - brcdVlanExtStatsInSwitchedPkts - Counter64, - brcdVlanExtStatsInRoutedPkts - Counter64, - brcdVlanExtStatsInPkts - Counter64, - brcdVlanExtStatsOutSwitchedPkts - Counter64, - brcdVlanExtStatsOutRoutedPkts - Counter64, - brcdVlanExtStatsOutPkts - Counter64, - brcdVlanExtStatsInSwitchedOctets - Counter64, - brcdVlanExtStatsInRoutedOctets - Counter64, - brcdVlanExtStatsInOctets - Counter64, - brcdVlanExtStatsOutSwitchedOctets - Counter64, - brcdVlanExtStatsOutRoutedOctets - Counter64, - brcdVlanExtStatsOutOctets - Counter64 - } - -brcdVlanExtStatsVlanId OBJECT-TYPE - SYNTAX BrcdVlanIdTC - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The VLAN identifier (VLAN ID)." - ::= { brcdVlanExtStatsEntry 1 } - -brcdVlanExtStatsIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The ifIndex of the port belonging to this VLAN." - ::= { brcdVlanExtStatsEntry 2 } - -brcdVlanExtStatsPriorityId OBJECT-TYPE - SYNTAX PortPriorityTC - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Identifies the port QOS priority. - The values 1 through 8 internally maps to priorities 0 through 7. - The value 128 indicates that priority-level accounting is not enabled" - ::= { brcdVlanExtStatsEntry 3 } - -brcdVlanExtStatsInSwitchedPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of valid frames received by this port classified as belonging -to this VLAN for switched packets. The value is applicable only if the -system was configured to separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 4 } - -brcdVlanExtStatsInRoutedPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - " The number of valid frames received by this port classified as belonging -to this VLAN for routed packets. The value is applicable only if the system -was configured to separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 5 } - -brcdVlanExtStatsInPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of valid frames received by this port classified as belonging -to this VLAN for both switched and routed packets." - ::= { brcdVlanExtStatsEntry 6 } - -brcdVlanExtStatsOutSwitchedPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of valid frames transmitted by this port - classified as belonging to this VLAN for switched packets. - The value is applicable only if the system was configured - to separately count the two types of packets. - Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 7 } - -brcdVlanExtStatsOutRoutedPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of valid frames transmitted by this port classified - as belonging to this VLAN for routed packets. The value is - applicable only if the system was configured to separately - count the two types of packets. Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 8 } - -brcdVlanExtStatsOutPkts OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of valid frames transmitted by this port classified - as belonging to this VLAN for both switched and routed packets." - ::= { brcdVlanExtStatsEntry 9 } - -brcdVlanExtStatsInSwitchedOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The bytes count received by this port classified as -belonging to this VLAN for switched packets. The value -is applicable only if the system was configured to -separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 10 } - -brcdVlanExtStatsInRoutedOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The bytes count received by this port classified as -belonging to this VLAN for routed packets. The value -is applicable only if the system was configured to -separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 11 } - -brcdVlanExtStatsInOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The bytes count received by this port classified -as belonging to this VLAN for both switched and -routed packets. " - ::= { brcdVlanExtStatsEntry 12 } - -brcdVlanExtStatsOutSwitchedOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The bytes count transmitted by this port classified -as belonging to this VLAN for switched packets. -The value is applicable only if the system was configured -to separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 13 } - -brcdVlanExtStatsOutRoutedOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only +snVLanByPortCfgMcastVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write STATUS current DESCRIPTION - "The bytes count transmitted by this port classified -as belonging to this VLAN for routed packets. -The value is applicable only if the system was configured -to separately count the two types of packets. -Otherwise, it returns 0." - ::= { brcdVlanExtStatsEntry 14 } + "Multicast version at this VLAN can be set + 2 or 3, and the default is 2. The initial value is 0" + ::= { snVLanByPortCfgEntry 27 } -brcdVlanExtStatsOutOctets OBJECT-TYPE - SYNTAX Counter64 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The bytes count transmitted by this port classified -as belonging to this VLAN for both switched and -routed packets. " - ::= { brcdVlanExtStatsEntry 15 } +snVLanByPortCfgLoopDetectionMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. + There are 2 modes to this feature. Strict Mode (Per Port) and Loose Mode (Per VLAN). This object + focusses on the Loose Mode, where a loop is detected if a test packet is received on the same vlan + on which it was sent. The default is false state." + DEFVAL + { false } + ::= { snVLanByPortCfgEntry 28 } --- VLAN by Protocol Configuration Table +-- VLAN by Protocol Configuration Table snVLanByProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVLanByProtocolEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "." ::= { snVLanInfo 2 } @@ -2146,10 +2049,10 @@ snVLanByProtocolTable OBJECT-TYPE snVLanByProtocolEntry OBJECT-TYPE SYNTAX SnVLanByProtocolEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the VLAN By Protocol Configuration table. " - INDEX { + INDEX { snVLanByProtocolVLanId, snVLanByProtocolIndex } @@ -2168,9 +2071,9 @@ SnVLanByProtocolEntry ::= SEQUENCE { snVLanByProtocolExcludeMask PortMask, snVLanByProtocolRouterIntf - INTEGER, + INTEGER, snVLanByProtocolRowStatus - INTEGER, + INTEGER, snVLanByProtocolDynamicMask PortMask, snVLanByProtocolChassisStaticMask @@ -2192,7 +2095,7 @@ SnVLanByProtocolEntry ::= SEQUENCE { snVLanByProtocolVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The VLAN ID index to both of the VLAN By Port Info Table and this table." @@ -2210,9 +2113,9 @@ snVLanByProtocolIndex OBJECT-TYPE ipv6(7) } MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - " The following IP/IPX protocol VLAN types are operated + " The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), @@ -2225,7 +2128,7 @@ snVLanByProtocolDynamic OBJECT-TYPE enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION " disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. " @@ -2252,7 +2155,7 @@ snVLanByProtocolExcludeMask OBJECT-TYPE snVLanByProtocolRouterIntf OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured." @@ -2267,7 +2170,7 @@ snVLanByProtocolRowStatus OBJECT-TYPE modify(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to create and delete row in the table and control @@ -2326,7 +2229,7 @@ snVLanByProtocolChassisDynamicMask OBJECT-TYPE snVLanByProtocolVLanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "VLAN Community Name string." ::= { snVLanByProtocolEntry 12 } @@ -2334,7 +2237,7 @@ snVLanByProtocolVLanName OBJECT-TYPE snVLanByProtocolStaticPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a @@ -2345,7 +2248,7 @@ snVLanByProtocolStaticPortList OBJECT-TYPE snVLanByProtocolExcludePortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a @@ -2356,7 +2259,7 @@ snVLanByProtocolExcludePortList OBJECT-TYPE snVLanByProtocolDynamicPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a @@ -2371,7 +2274,7 @@ snVLanByProtocolDynamicPortList OBJECT-TYPE snVLanByIpSubnetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVLanByIpSubnetEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry of the VLAN By IPX Network Number Table." ::= { snVLanInfo 3 } @@ -2380,10 +2283,10 @@ snVLanByIpSubnetTable OBJECT-TYPE snVLanByIpSubnetEntry OBJECT-TYPE SYNTAX SnVLanByIpSubnetEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the VLAN By IP Subnet Configuration table. " - INDEX { + INDEX { snVLanByIpSubnetVLanId, snVLanByIpSubnetIpAddress, snVLanByIpSubnetSubnetMask @@ -2429,7 +2332,7 @@ SnVLanByIpSubnetEntry ::= SEQUENCE { snVLanByIpSubnetVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The VLAN ID index to both of the VLAN By Port Info Table and this table." @@ -2439,7 +2342,7 @@ snVLanByIpSubnetVLanId OBJECT-TYPE snVLanByIpSubnetIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "Subnet IP address." ::= { snVLanByIpSubnetEntry 2 } @@ -2447,7 +2350,7 @@ snVLanByIpSubnetIpAddress OBJECT-TYPE snVLanByIpSubnetSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "Subnet mask associated with the Subnet IP address." ::= { snVLanByIpSubnetEntry 3 } @@ -2458,7 +2361,7 @@ snVLanByIpSubnetDynamic OBJECT-TYPE enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION " disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. " @@ -2467,7 +2370,7 @@ snVLanByIpSubnetDynamic OBJECT-TYPE snVLanByIpSubnetStaticMask OBJECT-TYPE SYNTAX PortMask MAX-ACCESS read-write - STATUS deprecated + STATUS deprecated DESCRIPTION "The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product)" @@ -2476,7 +2379,7 @@ snVLanByIpSubnetStaticMask OBJECT-TYPE snVLanByIpSubnetExcludeMask OBJECT-TYPE SYNTAX PortMask MAX-ACCESS read-write - STATUS deprecated + STATUS deprecated DESCRIPTION "The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product)" @@ -2485,7 +2388,7 @@ snVLanByIpSubnetExcludeMask OBJECT-TYPE snVLanByIpSubnetRouterIntf OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured." @@ -2501,7 +2404,7 @@ snVLanByIpSubnetRowStatus OBJECT-TYPE modify(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to create and delete row in the table and control @@ -2560,7 +2463,7 @@ snVLanByIpSubnetChassisDynamicMask OBJECT-TYPE snVLanByIpSubnetVLanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "VLAN Community Name string." ::= { snVLanByIpSubnetEntry 13 } @@ -2568,7 +2471,7 @@ snVLanByIpSubnetVLanName OBJECT-TYPE snVLanByIpSubnetStaticPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a @@ -2579,7 +2482,7 @@ snVLanByIpSubnetStaticPortList OBJECT-TYPE snVLanByIpSubnetExcludePortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a @@ -2590,7 +2493,7 @@ snVLanByIpSubnetExcludePortList OBJECT-TYPE snVLanByIpSubnetDynamicPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a @@ -2605,7 +2508,7 @@ snVLanByIpSubnetDynamicPortList OBJECT-TYPE snVLanByIpxNetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVLanByIpxNetEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry of the VLAN By IPX Network Number Table." ::= { snVLanInfo 4 } @@ -2614,10 +2517,10 @@ snVLanByIpxNetTable OBJECT-TYPE snVLanByIpxNetEntry OBJECT-TYPE SYNTAX SnVLanByIpxNetEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry in the VLAN By Ipx Network Number Configuration table. " - INDEX { + INDEX { snVLanByIpxNetVLanId, snVLanByIpxNetNetworkNum, snVLanByIpxNetFrameType @@ -2663,7 +2566,7 @@ SnVLanByIpxNetEntry ::= SEQUENCE { snVLanByIpxNetVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The VLAN ID index to both of the VLAN By Port Info Table and this table." @@ -2673,7 +2576,7 @@ snVLanByIpxNetVLanId OBJECT-TYPE snVLanByIpxNetNetworkNum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "IPX Network Number." ::= { snVLanByIpxNetEntry 2 } @@ -2687,10 +2590,10 @@ snVLanByIpxNetFrameType OBJECT-TYPE ipxEthernetSnap(4) } MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - " The following IPX Frame types are operated - in Layer3 VLAN such as : + " The following IPX Frame types are operated + in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. @@ -2704,7 +2607,7 @@ snVLanByIpxNetDynamic OBJECT-TYPE enabled(1) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION " disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. " @@ -2713,7 +2616,7 @@ snVLanByIpxNetDynamic OBJECT-TYPE snVLanByIpxNetStaticMask OBJECT-TYPE SYNTAX PortMask MAX-ACCESS read-write - STATUS deprecated + STATUS deprecated DESCRIPTION "The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product)" @@ -2732,7 +2635,7 @@ snVLanByIpxNetExcludeMask OBJECT-TYPE snVLanByIpxNetRouterIntf OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured." @@ -2748,7 +2651,7 @@ snVLanByIpxNetRowStatus OBJECT-TYPE modify(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to create and delete row in the table and control @@ -2807,7 +2710,7 @@ snVLanByIpxNetChassisDynamicMask OBJECT-TYPE snVLanByIpxNetVLanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "VLAN Community Name string." ::= { snVLanByIpxNetEntry 13 } @@ -2815,7 +2718,7 @@ snVLanByIpxNetVLanName OBJECT-TYPE snVLanByIpxNetStaticPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a @@ -2826,7 +2729,7 @@ snVLanByIpxNetStaticPortList OBJECT-TYPE snVLanByIpxNetExcludePortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a @@ -2837,7 +2740,7 @@ snVLanByIpxNetExcludePortList OBJECT-TYPE snVLanByIpxNetDynamicPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a @@ -2852,7 +2755,7 @@ snVLanByIpxNetDynamicPortList OBJECT-TYPE snVLanByATCableTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVLanByATCableEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "A Table Of VLAN By AppleTalk Network Number." ::= { snVLanInfo 5 } @@ -2860,7 +2763,7 @@ snVLanByATCableTable OBJECT-TYPE snVLanByATCableEntry OBJECT-TYPE SYNTAX SnVLanByATCableEntry MAX-ACCESS not-accessible - STATUS current + STATUS deprecated DESCRIPTION "An entry of the AppleTalk Cable VLAN table." INDEX {snVLanByATCableVLanId, snVLanByATCableIndex} @@ -2886,7 +2789,7 @@ SnVLanByATCableEntry ::= SEQUENCE { snVLanByATCableVLanId OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to." @@ -2895,7 +2798,7 @@ snVLanByATCableVLanId OBJECT-TYPE snVLanByATCableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION "AppleTalk Cable VLAN index number." ::= { snVLanByATCableEntry 2 } @@ -2903,7 +2806,7 @@ snVLanByATCableIndex OBJECT-TYPE snVLanByATCableRouterIntf OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The @@ -2920,7 +2823,7 @@ snVLanByATCableRowStatus OBJECT-TYPE modify(5) } MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "This object is used to create and delete row in the table and control @@ -2953,7 +2856,7 @@ snVLanByATCableChassisStaticMask OBJECT-TYPE snVLanByATCableVLanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "VLAN Name string." ::= { snVLanByATCableEntry 6 } @@ -2961,7 +2864,7 @@ snVLanByATCableVLanName OBJECT-TYPE snVLanByATCableStaticPortList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a @@ -2980,7 +2883,7 @@ snSwPortInfoTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION - "A specific snSwPortInfo group consists of a number of + "A specific snSwPortInfo group consists of a number of switch ports. " ::= { snSwPortInfo 1 } @@ -2989,13 +2892,13 @@ snSwPortInfoEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION - "An entry in the snSwPortInfo table indicates the - configuration on a specified port. A SNMP SET PDU - for a row of the snSwPortInfoTable requires the entired - sequence of the MIB Objects in each - snSwPortInfoEntry stored in one PDU. Otherwise, + "An entry in the snSwPortInfo table indicates the + configuration on a specified port. A SNMP SET PDU + for a row of the snSwPortInfoTable requires the entired + sequence of the MIB Objects in each + snSwPortInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned." - INDEX { + INDEX { snSwPortInfoPortNum } ::= { snSwPortInfoTable 1 } @@ -3023,17 +2926,17 @@ SnSwPortInfoEntry ::= SEQUENCE { INTEGER, snSwPortInfoPhysAddress PhysAddress, - snSwPortStatsInFrames + snSwPortStatsInFrames Counter32, - snSwPortStatsOutFrames + snSwPortStatsOutFrames Counter32, - snSwPortStatsAlignErrors + snSwPortStatsAlignErrors Counter32, - snSwPortStatsFCSErrors + snSwPortStatsFCSErrors Counter32, - snSwPortStatsMultiColliFrames + snSwPortStatsMultiColliFrames Counter32, - snSwPortStatsFrameTooLongs + snSwPortStatsFrameTooLongs Counter32, snSwPortStatsTxColliFrames Counter32, @@ -3109,7 +3012,7 @@ SnSwPortInfoEntry ::= SEQUENCE { INTEGER, snSwPortStatsInKiloBitsPerSec Unsigned32, - snSwPortStatsOutKiloBitsPerSec + snSwPortStatsOutKiloBitsPerSec Unsigned32, snSwPortLoadInterval INTEGER, @@ -3141,7 +3044,7 @@ snSwPortInfoPortNum OBJECT-TYPE STATUS deprecated DESCRIPTION "The port index. - The bit 0 to bit 7: port number. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only)." ::= { snSwPortInfoEntry 1 } @@ -3163,25 +3066,25 @@ snSwPortInfoMonitorMode OBJECT-TYPE snSwPortInfoTagMode OBJECT-TYPE SYNTAX INTEGER { - tagged(1), - untagged(2), + tagged(1), + untagged(2), auto(3), disabled(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "For tagged port, we could have multiple VLANs - per port. For untagged port or auto port, there - is only one VLAN ID per port." + "For tagged port, we could have multiple VLANs + per port. For untagged port or auto port, there + is only one VLAN ID per port." ::= { snSwPortInfoEntry 3 } snSwPortInfoChnMode OBJECT-TYPE SYNTAX INTEGER { none(0), - halfDuplex(1), - fullDuplex(2) + halfDuplex(1), + fullDuplex(2) } MAX-ACCESS read-write STATUS deprecated @@ -3194,7 +3097,7 @@ snSwPortInfoChnMode OBJECT-TYPE none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode - + The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. @@ -3221,11 +3124,14 @@ snSwPortInfoSpeed OBJECT-TYPE s9953M(10), s16G(11), s40G(13), - s2500M(14) + s2500M(14), + s5000M(15), + s100G(16), + s25G(17) } MAX-ACCESS read-write STATUS deprecated - DESCRIPTION + DESCRIPTION "The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. @@ -3241,6 +3147,9 @@ snSwPortInfoSpeed OBJECT-TYPE s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. + s5000M(15)..........5Gbits per second. + s100G(16)...........100Gbits per second. + s25G(17)...........25Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. @@ -3256,13 +3165,16 @@ snSwPortInfoSpeed OBJECT-TYPE s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. + s5000M(15)..........5Gbits per second. + s100G(16)...........100Gbits per second. + s25G(17)...........25Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. - For expansion ports, all of the above speed + For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port @@ -3287,15 +3199,16 @@ snSwPortInfoMediaType OBJECT-TYPE m10000BaseFX(12), m9953POS(13), m16GStacking(14), - m100GBaseFX(15), m40GStacking(16), - m40GBaseFX(17), - m10000BaseTX(18), - m2500BaseTX(19) + m2500BaseTX(19), + m100GBaseTX(20), + mMultiGigBZ(21), + m40GBaseTX(22), + m25GBaseFX(23) } MAX-ACCESS read-only STATUS deprecated - DESCRIPTION + DESCRIPTION "The media type for the port. The values are: other(1).........other or unknown media. @@ -3312,7 +3225,12 @@ snSwPortInfoMediaType OBJECT-TYPE m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14).16Gbits per second fiber. - m40GStacking(16). 40Gbits per second fiber." + m40GStacking(16). 40Gbits (stacking) per second fiber. + m2500BaseTX(19) 2.5Gbits per second fiber. + m100GBaseTX(20)...100Gbits per second fiber. + mMultiGigBZ(21)......2.5G/5G/10G multiGig per seconnd fiber, + m40GBaseTX(22)...40Gbits per second fiber. + m25GBaseTX(23)...25Gbits per second fiber." ::= { snSwPortInfoEntry 6 } @@ -3325,7 +3243,7 @@ snSwPortInfoConnectorType OBJECT-TYPE } MAX-ACCESS read-only STATUS deprecated - DESCRIPTION + DESCRIPTION "The type of connector that the port offers. The values are: other(1)...........other or unknown connector @@ -3346,7 +3264,7 @@ snSwPortInfoAdminStatus OBJECT-TYPE DESCRIPTION "The desired state of all ports. The testing(3) state indicates that no operational - packets can be passed. + packets can be passed. (same as ifAdminStatus in MIB-II)" ::= { snSwPortInfoEntry 8 } @@ -3362,7 +3280,7 @@ snSwPortInfoLinkStatus OBJECT-TYPE DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational - packets can be passed. + packets can be passed. (same as ifOperStatus in MIB-II)" ::= { snSwPortInfoEntry 9 } @@ -3395,7 +3313,7 @@ snSwPortInfoPhysAddress OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "The port physical address. The physical address + "The port physical address. The physical address represents the switch port." ::= { snSwPortInfoEntry 11 } @@ -3424,9 +3342,9 @@ snSwPortStatsAlignErrors OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "dot3StatsAlignmentErrors : A count of frames - received on a particular interface that are - not an integral number of octets in length + "dot3StatsAlignmentErrors : A count of frames + received on a particular interface that are + not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this @@ -3444,9 +3362,9 @@ snSwPortStatsFCSErrors OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "dot3StatsFCSErrors : A count of frames received - on a particular interface that are an integral - number of octets in length but do not pass the + "dot3StatsFCSErrors : A count of frames received + on a particular interface that are an integral + number of octets in length but do not pass the FCS check. The count represented by an instance of this @@ -3465,7 +3383,7 @@ snSwPortStatsMultiColliFrames OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "dot3StatsMultipleCollisionFrames : + "dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. @@ -3485,8 +3403,8 @@ snSwPortStatsFrameTooLongs OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "dot3StatsFrameTooLongs : A count of frames - received on a particular interface that + "dot3StatsFrameTooLongs : A count of frames + received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this @@ -3531,8 +3449,8 @@ snSwPortStatsFrameTooShorts OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - " A count of frames received on a particular - interface that below the minimum permitted + " A count of frames received on a particular + interface that below the minimum permitted frame size." ::= { snSwPortInfoEntry 20 } @@ -3565,7 +3483,7 @@ snSwPortDhcpGateListId OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "The ID for a DHCP gateway list entry relative + "The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID" ::= { snSwPortInfoEntry 23 } @@ -3731,11 +3649,16 @@ snSwPortInfoGigType OBJECT-TYPE m1000BaseSX2(26), m1000BaseGBXU(27), m1000BaseGBXD(28), + m2500BaseTX(50), + m100GBaseTX(51), + mMultiGigBZ(52), + m40GBaseTX(53), + m25GBaseFX(54), notApplicable(255) } MAX-ACCESS read-only STATUS deprecated - DESCRIPTION + DESCRIPTION "The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. @@ -3765,6 +3688,10 @@ snSwPortInfoGigType OBJECT-TYPE sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m2500BaseTX(50)...2.5GBASE fiber. + m100GBaseTX(51) ..100G base fiber + MultiGigBZ(52) .. 2.5G/5G/10G base fiber + m40GBaseTX(53) .. 40G base fiber + m25GBaseFX(54) .. 25G base fiber notApplicable(255)....a non-gigabit port." ::= { snSwPortInfoEntry 36 } @@ -4021,7 +3948,7 @@ snSwPortInLinePowerWattage OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "Adjust the inline power wattage. Valid value between + "Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If @@ -4110,7 +4037,7 @@ snSwIfInfoTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A specific snSwIfInfo group consists of a number of + "A specific snSwIfInfo group consists of a number of switch ports. " ::= { snSwPortInfo 5 } @@ -4119,11 +4046,11 @@ snSwIfInfoEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "An entry in the snSwIfInfo table indicates the - configuration on a specified port. A SNMP SET PDU - for a row of the snSwIfInfoTable requires the entire - sequence of the MIB Objects in each - snSwIfInfoEntry stored in one PDU. Otherwise, + "An entry in the snSwIfInfo table indicates the + configuration on a specified port. A SNMP SET PDU + for a row of the snSwIfInfoTable requires the entire + sequence of the MIB Objects in each + snSwIfInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned." INDEX { snSwIfInfoPortNum } ::= { snSwIfInfoTable 1 } @@ -4185,21 +4112,21 @@ SnSwIfInfoEntry ::= SEQUENCE { INTEGER, snSwIfLoadInterval INTEGER , - snSwIfStatsInFrames + snSwIfStatsInFrames Counter32, - snSwIfStatsOutFrames + snSwIfStatsOutFrames Counter32, - snSwIfStatsAlignErrors + snSwIfStatsAlignErrors Counter32, - snSwIfStatsFCSErrors + snSwIfStatsFCSErrors Counter32, - snSwIfStatsMultiColliFrames + snSwIfStatsMultiColliFrames Counter32, snSwIfStatsTxColliFrames Counter32, snSwIfStatsRxColliFrames Counter32, - snSwIfStatsFrameTooLongs + snSwIfStatsFrameTooLongs Counter32, snSwIfStatsFrameTooShorts Counter32, @@ -4237,7 +4164,7 @@ SnSwIfInfoEntry ::= SEQUENCE { INTEGER , snSwIfStatsInKiloBitsPerSec Unsigned32, - snSwIfStatsOutKiloBitsPerSec + snSwIfStatsOutKiloBitsPerSec Unsigned32, snSwIfStatsInJumboFrames Counter64, @@ -4247,12 +4174,30 @@ SnSwIfInfoEntry ::= SEQUENCE { INTEGER, snSwIfMacLearningDisable TruthValue, - snSwIfInfoL2FowardEnable + snSwIfInfoNativeMacAddress + PhysAddress, + snSwIfQosMonitorDropCounterMode INTEGER, - snSwIfInfoAllowAllVlan + snSwIfLRMAdapterPresent TruthValue, - snSwIfInfoNativeMacAddress - PhysAddress + snSwIfStpBPDUGuardMode + TruthValue, + snSwIfStpRootGuardMode + TruthValue, + snSwIfRstpAdminEdgePortMode + TruthValue, + snSwIfInfoClockMode + INTEGER, + snSwIfProtectedMode + TruthValue, + snSwIfTrustDscpMode + TruthValue, + snSwIfVoiceVlanId + Integer32, + snSwIfPortLoopDetectionMode + TruthValue, + snSWIfErrDisableStatus + INTEGER } snSwIfInfoPortNum OBJECT-TYPE @@ -4273,10 +4218,8 @@ snSwIfInfoMonitorMode OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "For FastIron platforms, this object is DEPRECATED by - snSwIf2MirrorMode and snPortMonitorTable. - For NetIron platforms, this object is DEPRECATED by - snPortMonitorTable." + "DEPRECATED by snSwIf2MirrorMode and + snPortMonitorTable." ::= { snSwIfInfoEntry 2 } snSwIfInfoMirrorPorts OBJECT-TYPE @@ -4290,18 +4233,20 @@ snSwIfInfoMirrorPorts OBJECT-TYPE snSwIfInfoTagMode OBJECT-TYPE SYNTAX INTEGER { - tagged(1), + tagged(1), untagged(2), dual(3) } MAX-ACCESS read-write STATUS current DESCRIPTION - "For tagged/dual port, we could have multiple VLANs - per port. For untagged port, there - is only one VLAN ID per port, dual mode is associated with - a vlan id 'snSwIfVlanId', dual mode with snSwIfVlanId zero - disables the dual mode." + "Configure an interface as tagged member of non-default VLAN, + untagged VLAN membership of the interface will not be modified, + be it is default-VLAN or non-default VLAN. Configure an interface + as untagged member of non-default VLAN, that interface will be + moved from default VLAN to the configured VLAN. Dual(3) mode + no longer be needed, this option will be will be deprecated. + All tagged interfaces are implicit dual-mode ports." ::= { snSwIfInfoEntry 4 } snSwIfInfoTagType OBJECT-TYPE @@ -4318,21 +4263,21 @@ snSwIfInfoTagType OBJECT-TYPE snSwIfInfoChnMode OBJECT-TYPE SYNTAX INTEGER { none(0), - halfDuplex(1), - fullDuplex(2) + halfDuplex(1), + fullDuplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured to operate in either half or full duplex mode. The values are: - none(0) is not used. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: + none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode - + The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. @@ -4357,15 +4302,18 @@ snSwIfInfoSpeed OBJECT-TYPE s2488M(9), s9953M(10), s16G(11), - s100G(12), + sOpticBased(12), s40G(13), - s2500M(14) + s2500M(14), + s5000M(15), + s100G(16), + s25G(17) } MAX-ACCESS read-write STATUS current - DESCRIPTION + DESCRIPTION "The speed configuration for a port. The values are: - none(0)..........not used. + none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. @@ -4377,8 +4325,12 @@ snSwIfInfoSpeed OBJECT-TYPE s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. + sOpticBased(12).....Optic-based s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. + s5000M(15)..........5Gbits per second. + s100G(16)...........100Gbits per second. + s25G(17)............25Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. @@ -4394,13 +4346,16 @@ snSwIfInfoSpeed OBJECT-TYPE s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second. - + s5000M(15)..........5Gbits per second. + s100G(16)...........100Gbits per second. + s25G(17)............25Gbits per second. + The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. - For expansion ports, all of the above speed + For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port @@ -4423,15 +4378,16 @@ snSwIfInfoMediaType OBJECT-TYPE m10000BaseFX(12), m9953POS(13), m16GStacking(14), - m100GBaseFX(15), m40GStacking(16), - m40GBaseFX(17), - m10000BaseTX(18), - m2500BaseTX(19) + m2500BaseTX(19), + m100GBaseTX(20), + mMultiGigBZ(21), + m40GBaseTX(22), + m25GBaseFX(23) } MAX-ACCESS read-only STATUS current - DESCRIPTION + DESCRIPTION "The media type for the port. The values are: other(1).........other or unknown media. @@ -4448,28 +4404,28 @@ snSwIfInfoMediaType OBJECT-TYPE m10000BaseFX(12).10Gbits per second fiber. m9953POS(13).....9953Mbits per second (POS). m16GStacking(14)...16Gbits per second fiber. - m40GStacking(16). 40Gbits per second fiber. - m40GBaseFX(17)....40Gbits per second fiber. - m10000BaseTX(18)..10Gbits per second copper. - m2500BaseTX(19). 2.5Gbits per second fiber." + m40GStacking(16). 40Gbits (stacking) per second fiber. + m2500BaseTX(19). 2.5Gbits per second fiber. + m100GBaseTX(20)...100Gbits per second fiber. + mMultiGigBZ(21)......2.5G/5G/10G multiGig per seconnd fiber. + m40GBaseTX(22)...40 Gbits per second fiber. + m25GBaseFX(23)...25 Gbits per second fiber " ::= { snSwIfInfoEntry 8 } snSwIfInfoConnectorType OBJECT-TYPE SYNTAX INTEGER { other(1), copper(2), - fiber(3), - both(4) + fiber(3) } MAX-ACCESS read-only STATUS current - DESCRIPTION + DESCRIPTION "The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector - both(4)............Supports both Copper and Fiber This describes the physical connector type" ::= { snSwIfInfoEntry 9 } @@ -4484,7 +4440,7 @@ snSwIfInfoAdminStatus OBJECT-TYPE DESCRIPTION "The desired state of all ports. The testing(3) state indicates that no operational - packets can be passed. + packets can be passed. (same as ifAdminStatus in MIB-II)" ::= { snSwIfInfoEntry 10 } @@ -4499,7 +4455,7 @@ snSwIfInfoLinkStatus OBJECT-TYPE DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational - packets can be passed. + packets can be passed. (same as ifOperStatus in MIB-II)" ::= { snSwIfInfoEntry 11 } @@ -4530,7 +4486,7 @@ snSwIfInfoPhysAddress OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The port physical address. The physical address + "The port physical address. The physical address represents the switch port." ::= { snSwIfInfoEntry 13 } @@ -4563,7 +4519,7 @@ snSwIfDhcpGateListId OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The ID for a DHCP gateway list entry relative + "The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID" ::= { snSwIfInfoEntry 16 } @@ -4673,6 +4629,10 @@ snSwIfInfoGigType OBJECT-TYPE mXFP10000BaseEREW(48), m10000BaseT(49), m2500BaseTX(50), + m100GBaseTX(51), + mMultiGigBZ(52), + m40GBaseTX(53), + m25GBaseFX(54), m1000BaseGBXU(127), m1000BaseGBXD(128), m1000BaseFBX(129), @@ -4689,26 +4649,12 @@ snSwIfInfoGigType OBJECT-TYPE m1000BaseXGEW(141), m1000BaseXGCX4(142), m1000BaseXGZR(143), - m1000BaseXGZRD(144), - mCFP100GBaseSR10(145), - mCFP100GBaseLR4(146), - mCFP100GBaseER4(147), - mCFP100GBase10x10g2Km(148), - mCFP100GBase10x10g10Km(149), - qSFP40000BaseSR4(150), - qSFP40000Base10KmLR4(151), - mXFP10000BaseUSR(152), - mXFP10000BaseTwinax(153), - mCFP2-100GBaseSR10(154), - mCFP2-100GBaseLR4(155), - mCFP2-100GBaseER4(156), - mCFP2-100GBase10x10g2Km(157), - mCFP2-100GBase10x10g10Km(158), + m1000BaseXGZRD(144), notApplicable(255) } MAX-ACCESS read-only STATUS current - DESCRIPTION + DESCRIPTION "The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. @@ -4750,20 +4696,12 @@ snSwIfInfoGigType OBJECT-TYPE mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36) mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37) mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38). - m10000BaseT(49)...10GBASE fiber. + m10000BaseT(49))...10GBASE fiber. m2500BaseTX(50)...2.5GBASE fiber. - mCFP100GBaseSR10(145)... 100GbE CFP optic (MPO 2x12), SR10, for distances up to 100m over MMF. - mCFP100GBaseLR4(146)... 100GbE CFP optic (SC), LR4, for distances up to 10 km over SMF. - mCFP100GBaseER4(147)... 100GbE CFP optic, ER4, for distances up to 40 km over SMF. - mCFP100GBase10x10g2Km(148)... 100GbE CFP optic (LC), 10x10, for distances up to 2 km over SMF. - mCFP100GBase10x10g10Km(149)... 100GbE CFP optic (LC), 10x10, for distances up to 10 km over SMF. - mXFP10000BaseUSR(152)... 10 Gbps Ultra-Short Range (USR) 100m Ethernet optical transceiver. - mXFP10000BaseTwinax(153)... 10Gbps Active copper twinax cables. - mCFP2-100GBaseSR10(154)... 100GbE CFP2 optic (MPO 2x12), SR10, for distances up to 100m over MMF. - mCFP2-100GBaseLR4(155)... 100GbE CFP2 optic (SC), LR4, for distances up to 10 km over SMF. - mCFP2-100GBaseER4(156)... 100GbE CFP2 optic, ER4, for distances up to 40 km over SMF. - mCFP2-100GBase10x10g2Km(157)... 100GbE CFP2 optic (LC), 10x10, for distances up to 2 km over SMF. - mCFP2-100GBase10x10g10Km(158)... 100GbE CFP2 optic (LC), 10x10, for distances up to 10 km over SMF. + m100GBaseTX(51)...100GBASE fiber. + mMultiGigBZ(52)...2.5/5/10 multiGig fiber. + m40GBaseTX(53)...40GBASE fiber. + m25GBaseFX(54)...25GBASE fiber. notApplicable(255)....a non-gigabit port." ::= { snSwIfInfoEntry 21 } @@ -4791,14 +4729,11 @@ snSwIfFastSpanUplinkEnable OBJECT-TYPE snSwIfVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) - MAX-ACCESS read-write - STATUS current + MAX-ACCESS read-only + STATUS deprecated DESCRIPTION - "The ID of a VLAN of which this port is a member. Port must - be untagged. For tagged port which belongs to multiple - VLANs, this object return 0 which is an invalid VLAN ID - value, reading is valid only for untagged and dual mode, - writing is valid for only dual mode." + "This object return 0 due to no support for this object from FI 08.0.80 release. + Write operation not-supported for this object." ::= { snSwIfInfoEntry 24 } snSwIfRouteOnly OBJECT-TYPE @@ -4880,9 +4815,9 @@ snSwIfStatsAlignErrors OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot3StatsAlignmentErrors : A count of frames - received on a particular interface that are - not an integral number of octets in length + "dot3StatsAlignmentErrors : A count of frames + received on a particular interface that are + not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this @@ -4900,9 +4835,9 @@ snSwIfStatsFCSErrors OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot3StatsFCSErrors : A count of frames received - on a particular interface that are an integral - number of octets in length but do not pass the + "dot3StatsFCSErrors : A count of frames received + on a particular interface that are an integral + number of octets in length but do not pass the FCS check. The count represented by an instance of this @@ -4920,7 +4855,7 @@ snSwIfStatsMultiColliFrames OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot3StatsMultipleCollisionFrames : + "dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. @@ -4965,8 +4900,8 @@ snSwIfStatsFrameTooLongs OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot3StatsFrameTooLongs : A count of frames - received on a particular interface that + "dot3StatsFrameTooLongs : A count of frames + received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this @@ -4978,17 +4913,17 @@ snSwIfStatsFrameTooLongs OBJECT-TYPE Layer Management, counted exclusively according to the error status presented to the LLC." ::= { snSwIfInfoEntry 36 } - + snSwIfStatsFrameTooShorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION - " A count of frames received on a particular - interface that below the minimum permitted + " A count of frames received on a particular + interface that below the minimum permitted frame size." ::= { snSwIfInfoEntry 37 } - + snSwIfStatsInBcastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only @@ -5137,7 +5072,7 @@ snSwIfStatsOutUtilization OBJECT-TYPE "The output network utilization in hundredths of a percent over a 5 minutes interval." ::= { snSwIfInfoEntry 53 } - + snSwIfStatsInKiloBitsPerSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only @@ -5186,43 +5121,14 @@ snSwIfInfoMirrorMode OBJECT-TYPE snSwIfMacLearningDisable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION "The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error." - DEFVAL - { false } + DEFVAL + { false } ::= { snSwIfInfoEntry 59 } -snSwIfInfoL2FowardEnable OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2), - globalConfig(3) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The status of cluster L2 forward feature on an ethernet port. - When this object is set to disable, the STP protocol packets - coming on the MCT VLANs are dropped. - - The snSwIfInfoL2FowardEnable has more preference than brcdMctL2Forward - for this interface when set with enable(1) or disable(2). When set to - globalConfig(3) the status of brcdMctL2Forward object applies for this - interface." - DEFVAL { globalConfig } - ::= { snSwIfInfoEntry 60 } - -snSwIfInfoAllowAllVlan OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Specifies allowing all vlan packets for pbr" - DEFVAL { false } - ::= { snSwIfInfoEntry 61 } - snSwIfInfoNativeMacAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only @@ -5231,7 +5137,177 @@ snSwIfInfoNativeMacAddress OBJECT-TYPE "The port native MAC address. The native MAC address represents the switch port." ::= { snSwIfInfoEntry 62 } - + +snSwIfQosMonitorDropCounterMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable monitoring egress drop counter on this port. + ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. + Only when the port is selected, these drop counters can be monitored and included in the total + egress drop for the port. Please note that only one port can be selected in a unit. + This object is only applied to ICX7150 platform, and is enabled by default on other FI platforms" + ::= { snSwIfInfoEntry 63 } + +snSwIfLRMAdapterPresent OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To display the state for Long Reach Module (LRM) adapter is presented on this port. + Some FastIron ICX devices support LRM optics on 10G fiber ports. + LRM adapter (Fluffy) is used to support LRM optics on those switch ports. + false: the port is not connected to LRM adapter + true: the port is connected to LRM adapter + The default is false state" + DEFVAL + { false } + ::= { snSwIfInfoEntry 64 } + +snSwIfStpBPDUGuardMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of the spanning tree BPDU guard on an ethernet port. + The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 65 } + +snSwIfStpRootGuardMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of the spanning tree root guard on an ethernet port. + Declare the port to be on root guard for all spanning trees. + The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 66 } + +snSwIfRstpAdminEdgePortMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of the rapid spanning tree admin edge port on an ethernet port. + Declare the port to be an operational edge for all vlans. + The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 67 } + +snSwIfInfoClockMode OBJECT-TYPE + SYNTAX INTEGER { + none(0), + master(1), + slave(2), + auto(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port can be configured to operate in either + master or slave mode. The values are: + none(0).........no configured or no support for clock mode, like fiber ports. + master(1).......master mode + slave(2)........slave mode + auto(3)........auto mode, this is the default value for copper ports" + ::= { snSwIfInfoEntry 68 } + +snSwIfProtectedMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. + The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 69 } + +snSwIfTrustDscpMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of Trust DSCP on an ethernet port. + The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 70 } + +snSwIfVoiceVlanId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VLAN can be configurated as a voice over IP VLAN on an ethernet port. + The valid range of voice VLAN ID is 1-4095. + The value 0 means that the voice VLAN is not configurated or is not applicable" + ::= { snSwIfInfoEntry 71 } + +snSwIfPortLoopDetectionMode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. + There are 2 modes to this feature. Strict Mode (Per Port) and Loose Mode (Per VLAN). This object + focusses on the Strict Mode, where a loop is detected if a test packet is received on the same port + on which it was sent. The default is false state." + DEFVAL + { false } + ::= { snSwIfInfoEntry 72 } + +snSWIfErrDisableStatus OBJECT-TYPE + SYNTAX INTEGER { + not-error-disable(0), + bpdu-guard(1), + loop-detection(2), + invalid-licence(3), + packet-inerror(4), + loam-remote-critical-error(5), + needs-reboot(6), + bcast-threshold-exceed(7), + mcast-threshold-exceed(8), + dlf-threshold-exceed(9), + stack-port-problem(10), + spx-invalid-topo(11), + pvst-protect(12), + bpdu-tunnel-threshold-exceed(13), + lag-oper-speed-mismatch(14), + cause-counter(15) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port's error disable status. The values are: + not-error-disable(0).........the port is not under error disable state. + bpdu-guard(1).......ERRDISABLE_BPDUGUARD + loop-detection(2)........ERRDISABLE_LOOP_DETECTION + invalid-licence(3)........ERRDISABLE_INVALID_LICENSE + packet-inerror(4)........ERRDISABLE_PACKET_INERROR + loam-remote-critical-error(5).......ERRDISABLE_LOAM_REM_CRITICAL_EVENT + needs-reboot(6)........ERRDISABLE_NEEDS_REBOOT + bcast-threshold-exceed(7).......ERRDISABLE_BCAST_THRESHOLD_EXCEEDED + mcast-threshold-exceed(8)........ERRDISABLE_MCAST_THRESHOLD_EXCEEDED + dlf-threshold-exceed(9).........ERRDISABLE_UNKNOWN_UCAST_THRESHOLD_EXCEEDED + stack-port-problem(10).......ERRDISABLE_STK_PORT_PROBLEM + spx-invalid-topo(11)........ERRDISABLE_SPX_INVALID_TOPO + pvst-protect(12)........ERRDISABLE_PVST_PROTECT + bpdu-tunnel-threshold-exceed(13)........ERRDISABLE_BPDU_TUN_THRESHOLD_EXCEEDED + lag-oper-speed-mismatch(14).......ERRDISABLE_LAG_OPER_SPEED_MISMATCH + cause-counter(15)........ERRDISABLE_CAUSE_CNT, this is not a valid reason, just the reason counter" + ::= { snSwIfInfoEntry 73 } + + -- Interface ID Registration Group snInterfaceId OBJECT IDENTIFIER ::= { snSwPortInfo 2 } @@ -5251,7 +5327,7 @@ sn6to4TunnelInterface OBJECT IDENTIFIER ::= { snInterfaceId 13 } -- Interface ID to ifIndex Lookup Table -- Given an interface ID, this table returns the ifIndex value. --- +-- -- Note: This table does not behave like most SNMP tables. It does not -- support GetNext. If you try to walk the table using GetNext, no rows -- will be returned. The contents of the table can only be accessed @@ -5344,7 +5420,7 @@ snIfIndexLookupInterfaceId OBJECT-TYPE -- Interface ID2 to ifIndex Lookup Table -- Given an interface ID2, this table returns the ifIndex value. --- +-- -- Note: This table does not behave like most SNMP tables. It does not -- support GetNext. If you try to walk the table using GetNext, no rows -- will be returned. The contents of the table can only be accessed @@ -5477,15 +5553,13 @@ snIfOpticalMonitoringTemperature OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "This object holds the value of the transmitter laser - diode temperature for the interface. This object + "This object holds the value of the transmitter laser + diode temperature for the interface. This object indicates the health of the transmitter. - + The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or - high/low warning. - For 100G LR4 and LR10 optic, this returns the average - temperature for all lanes." + high/low warning." ::= { snIfOpticalMonitoringInfoEntry 1 } snIfOpticalMonitoringTxPower OBJECT-TYPE @@ -5496,8 +5570,7 @@ snIfOpticalMonitoringTxPower OBJECT-TYPE "This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning - or alarm. For 100G LR4 and LR10 optic, this returns the aggregated - Tx Power for all lanes." + or alarm." ::= { snIfOpticalMonitoringInfoEntry 2 } snIfOpticalMonitoringRxPower OBJECT-TYPE @@ -5508,9 +5581,7 @@ snIfOpticalMonitoringRxPower OBJECT-TYPE "This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning - or alarm. - For 100G LR4 and LR10 optic, this returns the aggregated - Rx Power for all lanes." + or alarm." ::= { snIfOpticalMonitoringInfoEntry 3 } snIfOpticalMonitoringTxBiasCurrent OBJECT-TYPE @@ -5520,12 +5591,11 @@ snIfOpticalMonitoringTxBiasCurrent OBJECT-TYPE DESCRIPTION "Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or - alarm. - For 100G LR4 and LR10 optic, this returns the aggregated - Tx Bias Current for all lanes." + alarm." ::= { snIfOpticalMonitoringInfoEntry 4 } --- + + -- -- Show Media Information -- Information of the media device installed in the physical ports. -- @@ -5546,7 +5616,7 @@ snIfMediaInfoEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "An entry in the Interface Media Information table. + "An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table." INDEX { ifIndex } @@ -5571,7 +5641,7 @@ snIfMediaType OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The type of the media installed in the physical port." + "The type of the media installed in the physical port." ::= { snIfMediaInfoEntry 1 } snIfMediaVendorName OBJECT-TYPE @@ -5607,7 +5677,7 @@ snIfMediaSerialNumber OBJECT-TYPE "The vendor serial number of the media device." ::= { snIfMediaInfoEntry 5 } --- Optical Parameters Table per lane for a 40G SR4 and LR4, 100G LR4 and LR10 optics. +-- Optical Parameters Table per lane for a 100G LR4 and LR10 optic. snIfOpticalLaneMonitoringTable OBJECT-TYPE SYNTAX SEQUENCE OF SnIfOpticalLaneMonitoringEntry @@ -5615,9 +5685,8 @@ snIfOpticalLaneMonitoringTable OBJECT-TYPE STATUS current DESCRIPTION "This table lists the instrumented parameters of all - lanes within a 40G Optic of type SR4 and LR4, - 100G optic of type LR4 and LR10. LR4 and SR4 have 4 lanes - per optic, LR10 has 10 lanes per optic." + lanes within a 100G optic of type LR4 and LR10. + LR4 has 4 lanes per optic, LR10 has 10 lanes per optic." REFERENCE "ITU recommendations G.783, G.784, G.953" ::= { snSwPortInfo 10 } @@ -5644,6 +5713,8 @@ SnIfOpticalLaneMonitoringEntry ::= snIfOpticalLaneMonitoringRxPower DisplayString, snIfOpticalLaneMonitoringTxBiasCurrent + DisplayString, + snIfOpticalLaneMonitoringVoltage DisplayString } @@ -5652,9 +5723,8 @@ snIfOpticalLaneMonitoringLane OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "The lane number of this 40G or 100G optic. - LR4 and SR4 have 4 lanes per optic. LR10 has - 10 lanes per optic." + "The lane number of this 100G optic. LR4 has 4, and LR10 has + 10 lanes." ::= { snIfOpticalLaneMonitoringEntry 1 } snIfOpticalLaneMonitoringTemperature OBJECT-TYPE @@ -5703,6 +5773,20 @@ snIfOpticalLaneMonitoringTxBiasCurrent OBJECT-TYPE alarm." ::= { snIfOpticalLaneMonitoringEntry 5 } +snIfOpticalLaneMonitoringVoltage OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object holds the value of the transmitter laser + diode voltage for the lane in the interface. This + object indicates the health of the transmitter. + + The format is xxx.yyyy volts, followed by whether + the measured value is normal, high/low alarm or + high/low warning." + ::= { snIfOpticalLaneMonitoringEntry 6 } + -- -- Show egress port counter information @@ -5763,7 +5847,8 @@ brcdIfEgressCounterType OBJECT-TYPE SYNTAX INTEGER { other(1), unicast(2), - multicast(3) + multicast(3), + total(4) } MAX-ACCESS read-only STATUS current @@ -5784,21 +5869,135 @@ brcdIfEgressCounterDropPkts OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The egress dropped packet counters of the queue in a given port." - + "The egress dropped packet counters of the queue in a given port. + ICX7150 platform has another set of queue drop counters which are displayed only + when the port is monitored using the object, snSwIfQosMonitorDropCounterMode or CLI command. + Without the above port selection, only a partial amount of the total drop counters may be displayed." ::= { brcdIfEgressCounterInfoEntry 5 } +-- Switch Port Information Broadcast/Multicast/Unknown-Unicast Limit Group + +snSwIfInfoLimitTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnSwIfInfoLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Rate limiting table for different types of traffic for a port." + ::= { snSwPortInfo 12 } + +snSwIfInfoLimitEntry OBJECT-TYPE + SYNTAX SnSwIfInfoLimitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the snSwIfInfoLimit table indicates the + configuration on a specified port for rate limiting values." + INDEX { snSwIfInfoPortNum, snSwIfInfoLimitType } + ::= { snSwIfInfoLimitTable 1 } + +SnSwIfInfoLimitEntry ::= SEQUENCE { + snSwIfInfoLimitType + INTEGER, + snSwIfInfoLimitPkts + Unsigned32, + snSwIfInfoLimitBits + Unsigned32, + snSwIfInfoLimitThreshold + Unsigned32, + snSwIfInfoLimitShutdownTime + Unsigned32, + snSwIfInfoLimitLog + TruthValue, + snSwIfInfoLimitRowStatus + RowStatus + } + +snSwIfInfoLimitType OBJECT-TYPE + SYNTAX INTEGER { + broadcast(1), + multicast(2), + unknown-unicast(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of the limit, the values specified in this row + applies for, which takes on values broadcast, multicast, + unknown-unicast." + ::= { snSwIfInfoLimitEntry 1 } + +snSwIfInfoLimitPkts OBJECT-TYPE + SYNTAX Unsigned32(0..8388607) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Limit the number of packets to forward per second out + of the switch port. Setting a value of 0 to this object + disables the limitation check." + DEFVAL { 0 } + ::= { snSwIfInfoLimitEntry 2 } + +snSwIfInfoLimitBits OBJECT-TYPE + SYNTAX Unsigned32(0..8388607) + UNITS "KBPS" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Limit the number of kilo bytes to forward per second out + of the switch port. Setting a value of 0 to this object + disables the limitation check." + DEFVAL { 0 } + ::= { snSwIfInfoLimitEntry 3 } + +snSwIfInfoLimitThreshold OBJECT-TYPE + SYNTAX Unsigned32(1..1048576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of packets to be dropped when the rate limit is + reached before taking the specified action like shutdown port." + ::= { snSwIfInfoLimitEntry 4 } + +snSwIfInfoLimitShutdownTime OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the time the port should be in down state and this + takes effect only if Threshold is configured." + DEFVAL { 300 } + ::= { snSwIfInfoLimitEntry 5 } + +snSwIfInfoLimitLog OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable the logging of the rate limit occurances." + DEFVAL { false } + ::= { snSwIfInfoLimitEntry 6 } + +snSwIfInfoLimitRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies whether to config or unconfig the limit on the ifindex, + for the LimitType, which takes on values config or unconfig." + ::= { snSwIfInfoLimitEntry 7 } + -- Forwarding Database Group -- --- This group contains information relevant to +-- This group contains information relevant to -- the forwarding database in the system. -- The Forward Database Static Table Information -- --- This table contains all MAC addresses in the system. Static +-- This table contains all MAC addresses in the system. Static -- stations may be configured. @@ -5808,7 +6007,7 @@ snFdbTable OBJECT-TYPE STATUS current DESCRIPTION "This table contains snFdb information for each station - known to the system, one entry per station." + known to the system, one entry per station." ::= { snFdbInfo 1 } snFdbEntry OBJECT-TYPE @@ -5816,8 +6015,8 @@ snFdbEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "Each entry represents the information of a static MAC station." - INDEX { + "Each entry represents the information of a static MAC station." + INDEX { snFdbStationIndex } ::= { snFdbTable 1 } @@ -5855,7 +6054,7 @@ snFdbStationAddr OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The snFdbs physical address. The physical address + "The snFdbs physical address. The physical address represents a MAC Station." ::= { snFdbEntry 2 } @@ -5863,10 +6062,10 @@ snFdbStationAddr OBJECT-TYPE snFdbStationPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write - STATUS current + STATUS deprecated DESCRIPTION - "Station slot/port number. - The bit 0 to bit 7: port number. + "Station slot/port number. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only)." ::= { snFdbEntry 3 } @@ -5904,14 +6103,13 @@ snFdbStationQos OBJECT-TYPE snFdbStationType OBJECT-TYPE SYNTAX INTEGER { notSupported(0), - host(1), - router(2) + host(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The station type values are: - notSupported -- a read value only : this product does not + notSupported -- a read value only : this product does not support MultiLayer Switching. host -- any MAC station. router -- a router-typed station." @@ -5962,7 +6160,7 @@ snPortStpTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION - "A specific snPortStpTable consists of a number of + "A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN." @@ -5973,14 +6171,14 @@ snPortStpEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION - "An entry in the snPortStpTable indicates the - configuration on a specified port. A SNMP SET PDU - for a row of the snPortStpTable requires the entired - sequence of the MIB Objects in each - snPortStpEntry stored in one PDU. Otherwise, + "An entry in the snPortStpTable indicates the + configuration on a specified port. A SNMP SET PDU + for a row of the snPortStpTable requires the entired + sequence of the MIB Objects in each + snPortStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned." - INDEX { - snPortStpVLanId, + INDEX { + snPortStpVLanId, snPortStpPortNum } ::= { snPortStpTable 1 } @@ -5992,7 +6190,7 @@ SnPortStpEntry ::= SEQUENCE { Integer32, snPortStpPortPriority INTEGER, - snPortStpPathCost + snPortStpPathCost INTEGER, snPortStpOperState INTEGER, @@ -6025,7 +6223,7 @@ snPortStpVLanId OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "The VLAN ID of the VLAN switch community." + "The VLAN ID of the VLAN switch community." ::= { snPortStpEntry 1 } snPortStpPortNum OBJECT-TYPE @@ -6033,8 +6231,8 @@ snPortStpPortNum OBJECT-TYPE MAX-ACCESS read-only STATUS deprecated DESCRIPTION - "The port number of the Switch. - The bit 0 to bit 7: port number. + "The port number of the Switch. + The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only)." ::= { snPortStpEntry 2 } @@ -6055,11 +6253,11 @@ snPortStpPathCost OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "dot1dStpPortPathCost : The contribution of this - port to the path cost of paths towards the spanning - tree root which include this port. 802.1D-1990 - recommends that the default value of this parameter - be in inverse proportion to the speed of the + "dot1dStpPortPathCost : The contribution of this + port to the path cost of paths towards the spanning + tree root which include this port. 802.1D-1990 + recommends that the default value of this parameter + be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. Reading value zero @@ -6071,7 +6269,7 @@ snPortStpPathCost OBJECT-TYPE snPortStpOperState OBJECT-TYPE SYNTAX INTEGER { - notActivated(0), + notActivated(0), activated(1) } MAX-ACCESS read-only @@ -6079,7 +6277,7 @@ snPortStpOperState OBJECT-TYPE DESCRIPTION "By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. - activated(1)......the Port STP entry is activated and in running mode" + activated(1)......the Port STP entry is activated and in running mode" ::= { snPortStpEntry 5 } snPortStpPortEnable OBJECT-TYPE @@ -6234,7 +6432,7 @@ snIfStpTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A specific snIfStpTable consists of a number of + "A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabled for each VLAN." @@ -6245,14 +6443,14 @@ snIfStpEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "An entry in the snIfStpTable indicates the - configuration on a specified port. A SNMP SET PDU - for a row of the snIfStpTable requires the entired - sequence of the MIB Objects in each - snIfStpEntry stored in one PDU. Otherwise, + "An entry in the snIfStpTable indicates the + configuration on a specified port. A SNMP SET PDU + for a row of the snIfStpTable requires the entired + sequence of the MIB Objects in each + snIfStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned." - INDEX { - snIfStpVLanId, + INDEX { + snIfStpVLanId, snIfStpPortNum } ::= { snIfStpTable 1 } @@ -6309,7 +6507,7 @@ snIfStpVLanId OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The VLAN ID of the VLAN switch community." + "The VLAN ID of the VLAN switch community." ::= { snIfStpEntry 1 } snIfStpPortNum OBJECT-TYPE @@ -6337,11 +6535,11 @@ snIfStpCfgPathCost OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "dot1dStpPortPathCost : The contribution of this - port to the path cost of paths towards the spanning - tree root which include this port. 802.1D-1990 - recommends that the default value of this parameter - be in inverse proportion to the speed of the + "dot1dStpPortPathCost : The contribution of this + port to the path cost of paths towards the spanning + tree root which include this port. 802.1D-1990 + recommends that the default value of this parameter + be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed." @@ -6350,18 +6548,15 @@ snIfStpCfgPathCost OBJECT-TYPE snIfStpOperState OBJECT-TYPE SYNTAX INTEGER { - notActivated(0), + notActivated(0), activated(1) } MAX-ACCESS read-only STATUS current DESCRIPTION - "For FastIron: By default, this mode is set to notActivated(0). + "By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. - activated(1)......the Port STP or RSTP entry is enabled. - For NetIron: By default, this mode is set to notActivated(0). - notActivated(0)...the Port STP entry is not activated and not in running mode. - activated(1)......the Port STP entry is activated and in running mode" + activated(1)......the Port STP or RSTP entry is enabled" ::= { snIfStpEntry 5 } snIfStpPortState OBJECT-TYPE @@ -6479,11 +6674,11 @@ snIfStpOperPathCost OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "dot1dStpPortPathCost : The contribution of this - port to the path cost of paths towards the spanning - tree root which include this port. 802.1D-1990 - recommends that the default value of this parameter - be in inverse proportion to the speed of the + "dot1dStpPortPathCost : The contribution of this + port to the path cost of paths towards the spanning + tree root which include this port. 802.1D-1990 + recommends that the default value of this parameter + be in inverse proportion to the speed of the attached LAN. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress or port link is down." @@ -6561,8 +6756,8 @@ snTrunkTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A specific snTrunkTable consists of a number of - Trunk port-mask." + "A specific snTrunkTable consists of a number of + Trunk port-mask." ::= { snTrunkInfo 1 } snTrunkEntry OBJECT-TYPE @@ -6570,9 +6765,9 @@ snTrunkEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "An entry in the snTrunkTable indicates the - configuration on a specified Trunk port membership." - INDEX { + "An entry in the snTrunkTable indicates the + configuration on a specified Trunk port membership." + INDEX { snTrunkIndex } ::= { snTrunkTable 1 } @@ -6601,7 +6796,7 @@ snTrunkPortMask OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "Trunk membership of the Switch." + "Trunk membership of the Switch." ::= { snTrunkEntry 2 } @@ -6792,7 +6987,7 @@ snSwSummaryMode OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The Switch Group Configuration Summary is configured + "The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configuration Summary. @@ -6875,10 +7070,10 @@ snDhcpGatewayListRowStatus OBJECT-TYPE ::= { snDhcpGatewayListEntry 3 } --- DNS MIB Group --- snDnsDomainName and snDnsGatewayIpAddrList are deprecated, replaced +-- DNS MIB Group +-- snDnsDomainName and snDnsGatewayIpAddrList are deprecated, replaced -- by fdryDnsDomainNameTable and fdryDnsServerAddressTable respectively. --- The new table "fdryDnsDomainNameTable" and "fdryDnsServerAddressTable" +-- The new table "fdryDnsDomainNameTable" and "fdryDnsServerAddressTable" -- combines Ipv4 and Ipv6 DNS Servers configuration snDnsDomainName OBJECT-TYPE @@ -6894,7 +7089,7 @@ snDnsGatewayIpAddrList OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The DNS Gateway IP address list. This list contains 4 + "The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string." ::= { snDnsInfo 2 } @@ -6920,7 +7115,7 @@ snMacFilterEntry OBJECT-TYPE SnMacFilterEntry ::= SEQUENCE { snMacFilterIndex Integer32, - snMacFilterAction + snMacFilterAction INTEGER, snMacFilterSourceMac MacAddress, @@ -6949,7 +7144,7 @@ snMacFilterIndex OBJECT-TYPE ::= { snMacFilterEntry 1 } snMacFilterAction OBJECT-TYPE - SYNTAX INTEGER { deny(0), permit(1) } + SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -7091,7 +7286,7 @@ snMacFilterPortAccessFilters OBJECT-TYPE MAX-ACCESS read-write STATUS deprecated DESCRIPTION - "1st octet correspond to 1st filter + "1st octet correspond to 1st filter number and so on." ::= { snMacFilterPortAccessEntry 2 } @@ -7205,8 +7400,7 @@ snNTPPollInterval OBJECT-TYPE STATUS current DESCRIPTION "Interval specifies how often to poll the NTP server. - Each unit is one second. - This object is not supported in NI devices from R5.3" + Each unit is one second." DEFVAL { 1800 } ::= { snNTPGeneral 1 } @@ -7257,8 +7451,8 @@ snNTPTimeZone OBJECT-TYPE gmtPlus0330(42), gmtMinus0330(43), gmtMinus0830(44), - gmtMinus0930(45) - } + gmtMinus0930(45) + } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -7292,8 +7486,7 @@ snNTPSystemClock OBJECT-TYPE octet 5: years since 1900 octet 6: days since Sunday [0-6] Setting this object requires valid value in octets 0 to 5, - and zero in octet 6. System clock can be disabled by setting - zero to all octets." + and zero in octet 6." ::= { snNTPGeneral 4 } snNTPSync OBJECT-TYPE @@ -7303,8 +7496,7 @@ snNTPSync OBJECT-TYPE DESCRIPTION "Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. - For get operation, always return 'other(1)'. - This object is not supported in NI devices from R5.3" + For get operation, always return 'other(1)'." ::= { snNTPGeneral 5 } -- NTP server table @@ -7375,9 +7567,9 @@ snRadiusSNMPAccess OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Indicate whether RADIUS server and key related MIB objects can be - accessed by SNMP manager. If value is disabled, then snRadiusKey - and snRadiusServerTable objects will not be accessible." + "Indicate whether Radius group MIB obejcts can be + accessed by SNMP manager. If value is disabled, + all Radius group MIB objects return 'general error'." DEFVAL { disabled } ::= { snRadiusGeneral 1 } @@ -7392,17 +7584,17 @@ snRadiusEnableTelnetAuth OBJECT-TYPE ::= { snRadiusGeneral 2 } snRadiusRetransmit OBJECT-TYPE - SYNTAX INTEGER (0..5) + SYNTAX INTEGER (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of authentication query retransmissions to the Radius server." - DEFVAL { 3 } + DEFVAL { 2 } ::= { snRadiusGeneral 3 } snRadiusTimeOut OBJECT-TYPE - SYNTAX INTEGER (1..60) + SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION @@ -7412,24 +7604,23 @@ snRadiusTimeOut OBJECT-TYPE ::= { snRadiusGeneral 4 } snRadiusDeadTime OBJECT-TYPE - SYNTAX INTEGER (1..5) + SYNTAX INTEGER (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval specifies Radius server dead time, each unit is one minute." - DEFVAL { 3 } + DEFVAL { 2 } ::= { snRadiusGeneral 5 } snRadiusKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses - SNMPv3 with data encrypted using privacy key. - FastIron and NetIron platforms support keysize upto 64 characters." + SNMPv3 with data encrypted using privacy key." ::= { snRadiusGeneral 6 } snRadiusLoginMethod OBJECT-TYPE @@ -7588,12 +7779,11 @@ snRadiusServerRowStatus OBJECT-TYPE ::= { snRadiusServerEntry 4 } snRadiusServerRowKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION - "Authentication key displayed as encrypted text. - FastIron and NetIron platforms support keysize upto 64 characters." + "Authentication key displayed as encrypted text." ::= { snRadiusServerEntry 5 } snRadiusServerUsage OBJECT-TYPE @@ -7643,14 +7833,13 @@ snTacacsDeadTime OBJECT-TYPE ::= { snTacacsGeneral 3 } snTacacsKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses - SNMPv3 with data encrypted using privacy key. - FastIron and NetIron platforms support keysize upto 64 characters." + SNMPv3 with data encrypted using privacy key." ::= { snTacacsGeneral 4 } snTacacsSNMPAccess OBJECT-TYPE @@ -7658,9 +7847,9 @@ snTacacsSNMPAccess OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Indicate whether TACACS+ server and key related MIB objects can be - accessed by SNMP manager. If value is disabled, then snTacacsKey - and snTacacsServerTable MIB objects will not be accessible." + "Indicate whether Tacacs group MIB obejcts can be + accessed by SNMP manager. If value is disabled, + all Tacacs group MIB objects return 'general error'." DEFVAL { disabled } ::= { snTacacsGeneral 5 } @@ -7728,14 +7917,13 @@ snTacacsServerRowStatus OBJECT-TYPE ::= { snTacacsServerEntry 3 } snTacacsServerRowKey OBJECT-TYPE - SYNTAX DisplayString + SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses - SNMPv3 with data encrypted using privacy key. - FastIron and NetIron platforms support keysize upto 64 characters." + SNMPv3 with data encrypted using privacy key." ::= { snTacacsServerEntry 4 } snTacacsServerUsage OBJECT-TYPE @@ -7757,7 +7945,7 @@ snQosProfileTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table contains the configuration of qos profile + "A table contains the configuration of qos profile groups." ::= { snQos 1 } @@ -7786,7 +7974,7 @@ snQosProfileIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The table index of QOS Profile." + "The table index of QOS Profile." ::= { snQosProfileEntry 1 } snQosProfileName OBJECT-TYPE @@ -7820,7 +8008,7 @@ snQosBindTable OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "A table contains the configuration of 802.1p to qos profile + "A table contains the configuration of 802.1p to qos profile binding groups." ::= { snQos 2 } @@ -7864,7 +8052,7 @@ snQosBindProfileIndex OBJECT-TYPE STATUS current DESCRIPTION "QOS Bind Profile Index. This is pointer to the - index of snQosProfile Table." + index of snQosProfile Table." ::= { snQosBindEntry 3 } -- Denial of service attack @@ -7873,7 +8061,7 @@ snDosAttack OBJECT IDENTIFIER ::= { snQos 3 } snDosAttackGlobal OBJECT IDENTIFIER ::= { snDosAttack 1 } snDosAttackICMPDropCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7881,7 +8069,7 @@ snDosAttackICMPDropCount OBJECT-TYPE ::= { snDosAttackGlobal 1 } snDosAttackICMPBlockCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7889,7 +8077,7 @@ snDosAttackICMPBlockCount OBJECT-TYPE ::= { snDosAttackGlobal 2 } snDosAttackSYNDropCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7897,7 +8085,7 @@ snDosAttackSYNDropCount OBJECT-TYPE ::= { snDosAttackGlobal 3 } snDosAttackSYNBlockCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7925,13 +8113,13 @@ SnDosAttackPortEntry ::= SEQUENCE { snDosAttackPort Integer32, snDosAttackPortICMPDropCount - Counter32, + Counter64, snDosAttackPortICMPBlockCount - Counter32, + Counter64, snDosAttackPortSYNDropCount - Counter32, + Counter64, snDosAttackPortSYNBlockCount - Counter32 + Counter64 } snDosAttackPort OBJECT-TYPE @@ -7939,11 +8127,11 @@ snDosAttackPort OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "ifIndex value of a port." + "ifIndex value of a port." ::= { snDosAttackPortEntry 1 } snDosAttackPortICMPDropCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7951,7 +8139,7 @@ snDosAttackPortICMPDropCount OBJECT-TYPE ::= { snDosAttackPortEntry 2 } snDosAttackPortICMPBlockCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7959,7 +8147,7 @@ snDosAttackPortICMPBlockCount OBJECT-TYPE ::= { snDosAttackPortEntry 3 } snDosAttackPortSYNDropCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7967,7 +8155,7 @@ snDosAttackPortSYNDropCount OBJECT-TYPE ::= { snDosAttackPortEntry 4 } snDosAttackPortSYNBlockCount OBJECT-TYPE - SYNTAX Counter32 + SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -7980,6 +8168,93 @@ snAuthentication OBJECT IDENTIFIER ::= { snAAA 1 } snAuthorization OBJECT IDENTIFIER ::= { snAAA 2 } snAccounting OBJECT IDENTIFIER ::= { snAAA 3 } +snAuthenticationDot1x OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A sequence of authentication methods. Each octet represents + a method to authorize the user command. Each octet + has the following value: + radius(2) - authenticate by requesting radius server + none(6) - no authentication + Setting a zero length octet string invalidates all + previous authentication methods." + ::= { snAuthentication 1 } + +snAuthenticationEnable OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A sequence of authentication methods. Each octet represents + a method to authorize the user command. Each octet + has the following value: + enable(1) - Use enable password for authentication + radius(2) - authenticate by requesting radius server + local(3) - Use local user for authentication + line(4) - Use line (telnet) password for authentication + tacplus(5) - authenticate by requesting tacplus server + none(6) - no authentication + tacacs(7) - Use TACACS authentication + Setting a zero length octet string invalidates all + previous authentication methods." + ::= { snAuthentication 2 } + +snAuthenticationLogin OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A sequence of authentication methods. Each octet represents + a method to authorize the user command. Each octet + has the following value: + enable(1) - Use enable password for authentication + radius(2) - authenticate by requesting radius server + local(3) - Use local user for authentication + line(4) - Use line (telnet) password for authentication + tacplus(5) - authenticate by requesting tacplus server + none(6) - no authentication + tacacs(7) - Use TACACS authentication + Setting a zero length octet string invalidates all + previous authentication methods." + ::= { snAuthentication 3 } + +snAuthenticationSnmpserver OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A sequence of authentication methods. Each octet represents + a method to authorize the user command. Each octet + has the following value: + enable(1) - Use enable password for authentication + local(3) - Use local user for authentication + none(6) - no authentication + Setting a zero length octet string invalidates all + previous authentication methods." + ::= { snAuthentication 4 } + +snAuthenticationWebserver OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A sequence of authentication methods. Each octet represents + a method to authorize the user command. Each octet + has the following value: + enable(1) - Use enable password for authentication + radius(2) - authenticate by requesting radius server + local(3) - Use local user for authentication + line(4) - Use line (telnet) password for authentication + tacplus(5) - authenticate by requesting tacplus server + none(6) - no authentication + tacacs(7) - Use TACACS authentication + Setting a zero length octet string invalidates all + previous authentication methods." + ::= { snAuthentication 5 } + + snAuthorizationCommandMethods OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..3)) MAX-ACCESS read-write @@ -8009,7 +8284,7 @@ snAuthorizationCommandLevel OBJECT-TYPE values: 0 - Privilege level 0 4 - Privilege level 4 - 5 - Privilege level 5." + 5 - Privilege level 5." ::= { snAuthorization 2 } snAuthorizationExec OBJECT-TYPE @@ -8027,6 +8302,33 @@ snAuthorizationExec OBJECT-TYPE authorization methods." ::= { snAuthorization 3 } +snAuthorizationCoaEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "For change of Authorization (COA) enable. Possible enumeration + values: + 1 - Enable COA + 0 - No Enable COA." + ::= { snAuthorization 4 } + +snAuthorizationCoaIgnore OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..5)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "For change of Authorization (COA) ignore COA commands. Possible enumeration + values: + dm-request(1) - Disconnect message request + modify-acl(2) - Modify access control list + reauth-host(4) - Re-authenticate the host + disable-port(8) - Disable the port + flip-port(10) - Bounce the port." + ::= { snAuthorization 5 } snAccountingCommandMethods OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..3)) @@ -8057,7 +8359,7 @@ snAccountingCommandLevel OBJECT-TYPE values: level0 - Privilege level 0 level4 - Privilege level 4 - level5 - Privilege level 5." + level5 - Privilege level 5." ::= { snAccounting 2 } snAccountingExec OBJECT-TYPE @@ -8271,7 +8573,7 @@ snNetFlowAggregationIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The Aggregation scheme ID" + "The Aggregation scheme ID" ::= { snNetFlowAggregationEntry 1 } snNetFlowAggregationIp OBJECT-TYPE @@ -8407,7 +8709,63 @@ snNetFlowIfFlowSwitching OBJECT-TYPE -- sFlow Collector Table. snSFlowGlb OBJECT IDENTIFIER ::= { snSFlow 1 } - +snSflowStatus OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To enable/disable sflow sampling on all the interfaces. + disabled - sflow sampling disabled + enableed - sflow sampling enabled + + Unless globally enabled, it can't be enabled on an + interface specifically." + DEFVAL { disabled } + ::= { snSFlowGlb 1 } + +snSflowSampleRate OBJECT-TYPE + SYNTAX Unsigned32 (256..16777215) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To set the rate wt which the packet sampling to happen. + A value of 512 means, every 512th packet is simpleed for + flow collection." + DEFVAL { 4096 } + ::= { snSFlowGlb 2 } + +snSflowSourcePort OBJECT-TYPE + SYNTAX Unsigned32 (1025..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To set the UDP source port for sending the sflow samples + to the configured collectors. Any permissible value can + be configured for this and default is 8888." + DEFVAL { 8888 } + ::= { snSFlowGlb 3 } + +snSflowAgentAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To set the Agent IPv4/IPv6 address type on the switch. + Sflow uses the Agent IP address in the samples sent to collector + and this address is dynamically determined based on L2/L3 switch, + but can be administratively set also." + ::= { snSFlowGlb 4 } + +snSflowAgentAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "To set the Agent IPv4/IPv6 address type on the switch. + Sflow uses the Agent IP address in the samples sent to collector + and this address is dynamically determined based on L2/L3 switch, + but can be administratively set also." + ::= { snSFlowGlb 5 } snSflowCollectorTable OBJECT-TYPE SYNTAX SEQUENCE OF SnSflowCollectorEntry MAX-ACCESS not-accessible @@ -8533,7 +8891,7 @@ snFdpInterfaceFdpEnable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The flag, whether the Foundry Discovery Protocol + "The flag, whether the Ruckus Wireless Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE)." DEFVAL { true } @@ -8568,8 +8926,8 @@ snFdpCacheEntry OBJECT-TYPE MAX-ACCESS not-accessible STATUS current DESCRIPTION - "An entry in the snFdpCacheTable, having the information - received via FDP/CDP on one interface from one device. + "An entry in the snFdpCacheTable, having the information + received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally." @@ -8585,8 +8943,8 @@ FdpCacheEntry ::= SEQUENCE { snFdpCacheVersion DisplayString, snFdpCacheDevicePort DisplayString, snFdpCachePlatform DisplayString, - snFdpCacheCapabilities DisplayString, - snFdpCacheVendorId INTEGER, + snFdpCacheCapabilities DisplayString, + snFdpCacheVendorId INTEGER, snFdpCacheIsAggregateVlan INTEGER, snFdpCacheTagType Integer32, snFdpCachePortVlanMask OCTET STRING, @@ -8725,27 +9083,28 @@ snFdpCachePortTagMode OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Neighbor device port tag mode" + "Neighbor device port tag mode. Dual(3) mode not supported from + FI 08.0.80 release. This object will return 0 for dual(3) Mode." ::= { snFdpCacheEntry 14 } snFdpCacheDefaultTrafficeVlanIdForDualMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only - STATUS current + STATUS deprecated DESCRIPTION - "Default traffic vlan id for neighbor device dual-mode port" + "This object return 0 due to no support for this object from FI 08.0.80 release." ::= { snFdpCacheEntry 15 } -- -- FDP Global Group --- +-- snFdpGlobalRun OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION - "The flag, whether the Foundry Discovery Protocol + "The flag, whether the Ruckus Wireless Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled." DEFVAL { false } @@ -8908,7 +9267,7 @@ snPortMacSecurityIfIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "ifIndex value of the local Ethernet interface on + "ifIndex value of the local Ethernet interface on which MAC security is configured." ::= {snPortMacSecurityEntry 1} @@ -8925,7 +9284,7 @@ snPortMacSecurityQueryIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Entry index within the given resource of local Ethernet interface on + "Entry index within the given resource of local Ethernet interface on which MAC security is configured." ::= {snPortMacSecurityEntry 3} @@ -8988,7 +9347,7 @@ snPortMacSecurityModuleStatTable OBJECT-TYPE ::= { snPortMacSecurity 2 } snPortMacSecurityModuleStatEntry OBJECT-TYPE - SYNTAX PortMacSecurityModuleStatEntry + SYNTAX PortMacSecurityModuleStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -9005,7 +9364,7 @@ PortMacSecurityModuleStatEntry ::= SEQUENCE { } snPortMacSecurityModuleStatSlotNum OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -9057,7 +9416,7 @@ snPortMacSecurityIntfContentTable OBJECT-TYPE ::= { snPortMacSecurity 3 } snPortMacSecurityIntfContentEntry OBJECT-TYPE - SYNTAX PortMacSecurityIntfContentEntry + SYNTAX PortMacSecurityIntfContentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -9096,7 +9455,7 @@ snPortMacSecurityIntfContentSecurity OBJECT-TYPE ::= {snPortMacSecurityIntfContentEntry 2} snPortMacSecurityIntfContentViolationType OBJECT-TYPE - SYNTAX INTEGER { shutdown(0), restrict(1) } + SYNTAX INTEGER { shutdown(0), restrict(1), protect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION @@ -9108,10 +9467,10 @@ snPortMacSecurityIntfContentShutdownTime OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "If snPortMacSecurityIntfContentViolationType is shutdown(1), + "If snPortMacSecurityIntfContentViolationType is shutdown(0), this value gives the number of seconds this interface is shut down when violation occurs. In the shutdown(1) case, 0 means interface is permanently down. - If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0." + If snPortMacSecurityIntfContentViolationType is restrict(1) or protect(2), this value will be always 0." ::= {snPortMacSecurityIntfContentEntry 4} snPortMacSecurityIntfContentShutdownTimeLeft OBJECT-TYPE @@ -9119,8 +9478,8 @@ snPortMacSecurityIntfContentShutdownTimeLeft OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "If snPortMacSecurityIntfContentViolationType is shutdown(1), - whether this interface has been shut down due to a security violation + "If snPortMacSecurityIntfContentViolationType is shutdown(1), + whether this interface has been shut down due to a security violation and the value gives the number of seconds before this interface is enabled again. If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0." ::= {snPortMacSecurityIntfContentEntry 5} @@ -9177,7 +9536,7 @@ snPortMacSecurityIntfMacEntry OBJECT-TYPE DESCRIPTION "An entry in the snPortMacSecurityIntfMacTable" INDEX { snPortMacSecurityIntfMacIfIndex, - snPortMacSecurityIntfMacAddress + snPortMacSecurityIntfMacAddress } ::= { snPortMacSecurityIntfMacTable 1 } @@ -9193,7 +9552,7 @@ snPortMacSecurityIntfMacIfIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "ifIndex value of the local Ethernet interface on + "ifIndex value of the local Ethernet interface on which MAC security is configured." ::= {snPortMacSecurityIntfMacEntry 1} @@ -9202,9 +9561,9 @@ snPortMacSecurityIntfMacAddress OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The secure MAC address for this local Ethernet interface on - which the secure MAC Address is configured and/or learned. - The maximum number of the secure MAC Addresses is restricted + "The secure MAC address for this local Ethernet interface on + which the secure MAC Address is configured and/or learned. + The maximum number of the secure MAC Addresses is restricted by the snPortMacSecurityIntfContentMaxLockedMacAllowed." ::= {snPortMacSecurityIntfMacEntry 2} @@ -9280,7 +9639,7 @@ snPortMacSecurityAutosaveMacIfIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "ifIndex value of the local Ethernet interface on + "ifIndex value of the local Ethernet interface on which MAC security is configured." ::= {snPortMacSecurityAutosaveMacEntry 1} @@ -9297,7 +9656,7 @@ snPortMacSecurityAutosaveMacQueryIndex OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "Entry index within the given resource of local Ethernet interface on + "Entry index within the given resource of local Ethernet interface on which MAC security is autosaved." ::= {snPortMacSecurityAutosaveMacEntry 3} @@ -9306,13 +9665,13 @@ snPortMacSecurityAutosaveMacAddress OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "The secure MAC address for this local Ethernet interface on + "The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved." ::= {snPortMacSecurityAutosaveMacEntry 4} --- Port MAC Global Security MIB Group +-- Port MAC Global Security MIB Group snPortMacGlobalSecurityFeature OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } diff --git a/foundry/FOUNDRY-SN-VSRP-MIB.mib b/foundry/FOUNDRY-SN-VSRP-MIB.mib index c56ce8f34..9ba592a8c 100644 --- a/foundry/FOUNDRY-SN-VSRP-MIB.mib +++ b/foundry/FOUNDRY-SN-VSRP-MIB.mib @@ -3,7 +3,7 @@ FOUNDRY-SN-VSRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Counter32,Integer32 - FROM SNMPv2-SMI + FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC snSwitch @@ -11,67 +11,69 @@ IMPORTS ; snVsrp MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "201708070000Z" -- Aug 7, 2017 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 1996-2017 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contact Info, Organization and Decscription" ::= { snSwitch 21} - + MacAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" STATUS current DESCRIPTION " This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as - a string of 6 octets. + a string of 6 octets. " - SYNTAX OCTET STRING (SIZE(6)) + SYNTAX OCTET STRING (SIZE(6)) -snVsrpGlobal OBJECT IDENTIFIER ::= { snVsrp 1 } +snVsrpGlobal OBJECT IDENTIFIER ::= { snVsrp 1 } snVsrpIfIntf OBJECT IDENTIFIER ::= { snVsrp 2 } snVsrpVirRtr OBJECT IDENTIFIER ::= { snVsrp 3 } -- Section 1: VSRP Global Variables -snVsrpGroupOperModeVsrp OBJECT-TYPE - SYNTAX INTEGER - { disabled(0), +snVsrpGroupOperModeVsrp OBJECT-TYPE + SYNTAX INTEGER + { disabled(0), enabled(1) - } + } MAX-ACCESS read-write STATUS current - DESCRIPTION "The VSRP is configured on this system either enabled or + DESCRIPTION "The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. - disabled(0)..........disable VSRP - enabled(1)...........activate VSRP" - ::= { snVsrpGlobal 1 } - + disabled(0)..........disable VSRP + enabled(1)...........activate VSRP" + ::= { snVsrpGlobal 1 } + snVsrpIfStateChangeTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write @@ -107,8 +109,8 @@ snVsrpClearVrrpStat OBJECT-TYPE "Clear VSRP statistics command." ::= { snVsrpGlobal 5 } - --- Section 2: VSRP Interface Table, new table with vlan_id as an index. + +-- Section 2: VSRP Interface Table, new table with vlan_id as an index, snVsrpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVsrpIfEntry @@ -148,9 +150,9 @@ snVsrpIfTable OBJECT-TYPE ::= { snVsrpIfEntry 1 } snVsrpIfAuthType OBJECT-TYPE - SYNTAX INTEGER { - noAuth(0), - simpleTextPasswd(1), + SYNTAX INTEGER { + noAuth(0), + simpleTextPasswd(1), ipAuthHeader(2) } MAX-ACCESS read-write @@ -164,14 +166,11 @@ snVsrpIfTable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The simple text password is allowed if only if - the snVsrpIfAuthType type is simpleTextPasswd and - the size should be greater than zero. - On reading this object, if the snVsrpIfAuthType type is - noAuth, then zero length string will be returned" + "The simple text password is allowed if only if + the snVsrpIfAuthType type is simpleTextPasswd." ::= { snVsrpIfEntry 3 } - + -- Section 3: VSRP Virtual Router Configuration Table -- The vsrp Virtual Router Table augments with vsrp specific information. @@ -208,23 +207,23 @@ snVsrpVirRtrTable OBJECT-TYPE INTEGER, snVsrpVirRtrCurrPriority INTEGER, - snVsrpVirRtrHelloInt + snVsrpVirRtrHelloInt INTEGER, - snVsrpVirRtrDeadInt + snVsrpVirRtrDeadInt INTEGER, - snVsrpVirRtrPreemptMode + snVsrpVirRtrPreemptMode INTEGER, snVsrpVirRtrState INTEGER, snVsrpVirRtrIpAddrMask OCTET STRING, - snVsrpVirRtrActivate + snVsrpVirRtrActivate INTEGER, snVsrpVirRtrTrackPortList OCTET STRING, - snVsrpVirRtrAdvertiseBackup + snVsrpVirRtrAdvertiseBackup INTEGER, - snVsrpVirRtrHoldDownInt + snVsrpVirRtrHoldDownInt INTEGER, snVsrpVirRtrInitTtl INTEGER, @@ -234,33 +233,33 @@ snVsrpVirRtrTable OBJECT-TYPE INTEGER, snVsrpVirRtrBackupInt INTEGER, - snVsrpVirRtrRowStatus + snVsrpVirRtrRowStatus INTEGER, - snVsrpVirRtrRxArpPktDropCnts + snVsrpVirRtrRxArpPktDropCnts Counter32, - snVsrpVirRtrRxIpPktDropCnts + snVsrpVirRtrRxIpPktDropCnts Counter32, - snVsrpVirRtrRxPortMismatchCnts + snVsrpVirRtrRxPortMismatchCnts Counter32, - snVsrpVirRtrRxNumOfIpMismatchCnts + snVsrpVirRtrRxNumOfIpMismatchCnts + Counter32, + snVsrpVirRtrRxIpMismatchCnts Counter32, - snVsrpVirRtrRxIpMismatchCnts + snVsrpVirRtrRxHelloIntMismatchCnts Counter32, - snVsrpVirRtrRxHelloIntMismatchCnts + snVsrpVirRtrRxPriorityZeroFromMasterCnts Counter32, - snVsrpVirRtrRxPriorityZeroFromMasterCnts + snVsrpVirRtrRxHigherPriorityCnts Counter32, - snVsrpVirRtrRxHigherPriorityCnts + snVsrpVirRtrTransToMasterStateCnts Counter32, - snVsrpVirRtrTransToMasterStateCnts + snVsrpVirRtrTransToBackupStateCnts Counter32, - snVsrpVirRtrTransToBackupStateCnts - Counter32, - snVsrpVirRtrCurrDeadInt + snVsrpVirRtrCurrDeadInt Integer32, - snVsrpVirRtrCurHelloInt + snVsrpVirRtrCurHelloInt INTEGER, - snVsrpVirRtrCurHoldDownInt + snVsrpVirRtrCurHoldDownInt INTEGER, snVsrpVirRtrCurInitTtl INTEGER, @@ -269,7 +268,7 @@ snVsrpVirRtrTable OBJECT-TYPE snVsrpVirRtrMasterIpAddr IpAddress } - + snVsrpVirRtrVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only @@ -277,7 +276,7 @@ snVsrpVirRtrTable OBJECT-TYPE DESCRIPTION "Vlan index." ::= { snVsrpVirRtrEntry 1 } - + snVsrpVirRtrId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only @@ -295,9 +294,9 @@ snVsrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The ownership of this vsrp router interface - can be set to backup(2). - VirRtr SNMP-GET returns incomplete(0), it means + "The ownership of this vsrp router interface + can be set to backup(2). + VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface." ::= { snVsrpVirRtrEntry 3 } @@ -311,8 +310,7 @@ snVsrpVirRtrTable OBJECT-TYPE the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership - is set to backup(2). - For NetIron platforms, the range is between 8 to 255." + is set to backup(2)." DEFVAL { 100 } ::= { snVsrpVirRtrEntry 4 } @@ -322,7 +320,7 @@ snVsrpVirRtrTable OBJECT-TYPE STATUS current DESCRIPTION "The higher the number the higher the priority is. - after this object is configured, the snVsrpVirRtrCurrPriority + after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN." @@ -387,7 +385,7 @@ snVsrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "The numbers of IP Addresses of this virtual router of this + "The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp." ::= { snVsrpVirRtrEntry 11 } @@ -410,12 +408,12 @@ snVsrpVirRtrTable OBJECT-TYPE STATUS current DESCRIPTION "This object specifies the identity of the physical port and virtual ports - whose state is to be monitored. Each port index is + whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then - they will be encoded like below. + they will be encoded like below. Encoding and decoding scheme is range based: - Each range prefix with 0000 (2 octets) where 0000 is not valid - ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 + Each range prefix with 0000 (2 octets) where 0000 is not valid + ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 @@ -423,7 +421,7 @@ snVsrpVirRtrTable OBJECT-TYPE If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. - The interface's Preference Level is reduced by value of + The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount @@ -438,8 +436,8 @@ snVsrpVirRtrTable OBJECT-TYPE DESCRIPTION "Set Advertise this backup router to master " DEFVAL { disabled } - ::= { snVsrpVirRtrEntry 14 } - + ::= { snVsrpVirRtrEntry 14 } + snVsrpVirRtrHoldDownInt OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS read-write @@ -455,7 +453,7 @@ snVsrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-write STATUS current DESCRIPTION - "VSRP:TTL in the hello packet to regulate the distance that a hello packet + "VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network" DEFVAL { 2 } ::= { snVsrpVirRtrEntry 16 } @@ -485,7 +483,7 @@ snVsrpVirRtrTable OBJECT-TYPE "Time interval between backup routers hello message advertisements (seconds)." DEFVAL { 60 } ::= { snVsrpVirRtrEntry 19 } - + snVsrpVirRtrRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), @@ -597,7 +595,7 @@ snVsrpVirRtrTable OBJECT-TYPE ::= { snVsrpVirRtrEntry 30 } snVsrpVirRtrCurrDeadInt OBJECT-TYPE - SYNTAX Integer32 + SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION @@ -626,7 +624,7 @@ snVsrpVirRtrTable OBJECT-TYPE MAX-ACCESS read-only STATUS current DESCRIPTION - "VSRP:TTL in the hello packet to regulate the distance that a hello packet + "VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network" ::= { snVsrpVirRtrEntry 34 } @@ -648,5 +646,5 @@ snVsrpVirRtrTable OBJECT-TYPE last received by this virtual router." ::= { snVsrpVirRtrEntry 36 } - -END + +END diff --git a/foundry/FOUNDRY-SN-WIRELESS-GROUP-MIB.mib b/foundry/FOUNDRY-SN-WIRELESS-GROUP-MIB.mib index 29fbfa504..48cb2571f 100644 --- a/foundry/FOUNDRY-SN-WIRELESS-GROUP-MIB.mib +++ b/foundry/FOUNDRY-SN-WIRELESS-GROUP-MIB.mib @@ -1,4 +1,18 @@ FOUNDRY-SN-WIRELESS-GROUP-MIB DEFINITIONS ::= BEGIN +-- Ruckus Wireless SN WIRELESS GROUP MIB Release 1.0.0 +-- Revision 0 08/07/17 + +-- Copyright 1996-2017 Ruckus Wireless, Inc.. +-- All rights reserved. +-- This Ruckus Wireless, Inc SNMP Management Information Base Specification +-- (Specification) embodies Ruckus Wireless, Inc' confidential and +-- proprietary intellectual property. Ruckus Wireless, Inc retains all +-- title and ownership in the Specification, including any +-- revisions. + +-- This Specification is supplied "AS IS," and Ruckus Wireless, Inc makes +-- no warranty, either express or implied, as to the use, +-- operation, condition, or performance of the Specification. -- SECTION 1: Top Level Definitions @@ -13,36 +27,23 @@ IMPORTS FROM SNMPv2-TC; snWireless MODULE-IDENTITY - LAST-UPDATED "201006020000Z" -- 04 June 2010 - ORGANIZATION "Brocade Communications Systems, Inc." - CONTACT-INFO - "Technical Support Center - 130 Holger Way, - San Jose, CA 95134 - Email: ipsupport@brocade.com - Phone: 1-800-752-8061 - URL: www.brocade.com" - DESCRIPTION - "Copyright 1996-2010 Brocade Communications Systems, Inc. - All rights reserved. - This Brocade Communications Systems SNMP Management Information Base Specification - embodies Brocade Communications Systems' confidential and proprietary - intellectual property. Brocade Communications Systems retains all - title and ownership in the Specification, including any revisions. - - This Specification is supplied AS IS, and Brocade Communications Systems makes - no warranty, either express or implied, as to the use, - operation, condition, or performance of the specification, and any unintended - consequence it may on the user environment." - - REVISION "201006020000Z" -- 04 June 2010 - DESCRIPTION - "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." - - REVISION "200909300000Z" -- September 30, 2009 - DESCRIPTION + LAST-UPDATED "200909300000Z" -- September 30, 2009 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871" + DESCRIPTION + "" + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION "convert from SMIv1 to SMIv2" - ::= {snSwitch 23} + REVISION "201708070000Z" -- Aug 7, 2017 + DESCRIPTION + "Modified contac Info, Organization" + ::= {snSwitch 23} -- textual conventions @@ -97,7 +98,7 @@ wgIfTable OBJECT-TYPE DESCRIPTION "WiFi Interface Table." ::= { snWireless 2 } - + wgIfEntry OBJECT-TYPE SYNTAX WgIfEntry MAX-ACCESS not-accessible diff --git a/foundry/README b/foundry/README index c7bd0202e..6d20a02ba 100644 --- a/foundry/README +++ b/foundry/README @@ -1,6 +1,41 @@ -foundry: - SPR08040 (01/2016) and foundry.mib (12/2015) +foundry / ruckus icx: + TNR10010c (2024/01), SPR08040 (01/2016) and foundry.mib (12/2015) Run split-foundry to separate into individual mib files. Diff individual files looking for additions. +1) needed to readd this to FOUNDRY-SN-SWITCH-GROUP-MIB , didn't find a replacement. + +@@ -273,6 +273,24 @@ + invalid(127) + } + ++PortPriorityTC ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "Refers to the IEEE 802.1p priority, or Priority Code Point (PCP). ++ 1 is the lowest, 8 is the highest. The value 128 may be used to ++ indicate invalid priority or priority is not enabled." ++ SYNTAX INTEGER { ++ priority0 (1), ++ priority1 (2), ++ priority2 (3), ++ priority3 (4), ++ priority4 (5), ++ priority5 (6), ++ priority6 (7), ++ priority7 (8), ++ nonPriority (128) ++ } ++ + -- Groups + + + +2) FOUNDRY-SN-ROOT-MIB need to uncomment: + +brcdQos OBJECT IDENTIFIER ::= { switch 14 } + +3) reformatted 2 dates in FDRY-TRAP-MIB + +4) changed imports so everything resolves again diff --git a/foundry/RUCKUS-ACL-MIB.mib b/foundry/RUCKUS-ACL-MIB.mib new file mode 100644 index 000000000..2095ef3b8 --- /dev/null +++ b/foundry/RUCKUS-ACL-MIB.mib @@ -0,0 +1,1646 @@ +RUCKUS-ACL-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Unsigned32, + Counter64, + Integer32, + NOTIFICATION-TYPE + FROM SNMPv2-SMI -- [RFC2578] + TEXTUAL-CONVENTION, + RowStatus, + DisplayString, + TruthValue, + MacAddress + FROM SNMPv2-TC -- [RFC2579] + InetAddressIPv4, + InetAddressIPv6 + FROM INET-ADDRESS-MIB -- [RFC4001] + InterfaceIndex, + ifIndex + FROM IF-MIB + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB; + +ruckusAclMIB MODULE-IDENTITY + LAST-UPDATED "201908070000Z" -- 17 Aug 2019 + ORGANIZATION "Ruckus Wireless, Inc.." + CONTACT-INFO + "Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us + " + DESCRIPTION + "Management Information for describing the MAC, IPv4, IPv6 ACLs, their + bindings on ports, VLANs and VLAN+Port combinations. + + The Ruckus Wireless, Inc proprietary MIB module for Access Control List. + It has new tables for Ipv4, Ipv6 and MAC Access Control Lists. + + Copyright (C) Ruckus Wireless, Inc., (2017) + This document and the information contained herein are provided on an + AS IS basis and Ruckus Wireless, Inc DISCLAIM ALL WARRANTIES, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF + THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED + WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + " + REVISION + "201908070000Z" -- 17 Aug 2019 + DESCRIPTION + "Initial version" + ::= { snSwitch 45 } + +ruckusAclNotify OBJECT IDENTIFIER ::= { ruckusAclMIB 0 } +ruckusAclObjects OBJECT IDENTIFIER ::= { ruckusAclMIB 1 } +ruckusAclConformance OBJECT IDENTIFIER ::= { ruckusAclMIB 2 } + +ruckusAcls OBJECT IDENTIFIER ::= { ruckusAclObjects 1 } +ruckusAclFilters OBJECT IDENTIFIER ::= { ruckusAclObjects 2 } +ruckusAclBindings OBJECT IDENTIFIER ::= { ruckusAclObjects 3 } +ruckusIpv4Filters OBJECT IDENTIFIER ::= { ruckusAclFilters 1 } +ruckusIpv6Filters OBJECT IDENTIFIER ::= { ruckusAclFilters 2 } +ruckusMacFilters OBJECT IDENTIFIER ::= { ruckusAclFilters 3 } + +-- -------------------------------------------------------------------------------- +-- Textual Conventions +-- -------------------------------------------------------------------------------- +VlanId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An ID used to represent VLAN identifier in the + system for both untagged and tagged VLANs packets)." + SYNTAX INTEGER (1..4094) + +AclName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A name uniquely identifies an access-list in a given + name space like IPv4, IPv6 or MAC ACLs." + SYNTAX DisplayString (SIZE (1..255)) + +AclPolicyName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A name uniquely identifies a traffic policy which can + applied with IPv4, IPv6 ACL filters." + SYNTAX DisplayString (SIZE (1..32)) + +AclType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes the type of ACL." + SYNTAX INTEGER { + mac(1), + ipv4(2), + ipv6(3) + } + +AclAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specifies an action such for ACL filter." + SYNTAX INTEGER { + deny(1), + permit(2) + } + +AclDirection ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The packet flow direction on interface, where the ACL + should be applied. It can be either or both." + SYNTAX INTEGER { + ingress(1), + egress(2) + } + +AclOperator ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents a operator value, such as equal, not-equal, + lesser than, greater than, range and none." + SYNTAX INTEGER { + eq(1), + neq(2), + lt(3), + gt(4), + range(5), + none(6) + } + +IpPrecedence ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The IP precedence value which can be used with L3 ACL filter." + SYNTAX INTEGER { + routine(1), + priority(2), + immediate(3), + flash(4), + flashOverride(5), + critical(6), + internet(7), + network(8), + other(9) + } + +IpTos ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The IP TOS value which can be used with L3 ACL filter." + SYNTAX INTEGER { + normal(1), + lowCost(2), + maxReliability(3), + maxThroughput(4), + minDelay(5) + } + +EtherType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "x" + STATUS current + DESCRIPTION + "EtherType value from the ethernet packet shown in Hex format." + SYNTAX Unsigned32 + +-- -------------------------------------------------------------------------------- +-- Access Control List Table +-- -------------------------------------------------------------------------------- +ruckusAclTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ruckus Ipv4/Ipv6/MAC Access Control Lists (ACLs)" + ::= { ruckusAcls 1 } + +ruckusAclEntry OBJECT-TYPE + SYNTAX RuckusAclEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the Ruckus Ipv4/Ipv6/MAC Access Control List table." + INDEX { ruckusAclType, ruckusAclName } + ::= { ruckusAclTable 1 } + +RuckusAclEntry ::= SEQUENCE { + ruckusAclType + AclType, + ruckusAclName + AclName, + ruckusAclAcctEnable + TruthValue, + ruckusAclStandard + TruthValue, + ruckusAclRowStatus + RowStatus + } + +ruckusAclType OBJECT-TYPE + SYNTAX AclType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Type of the ACL, this entry specifies." + ::= { ruckusAclEntry 1 } + +ruckusAclName OBJECT-TYPE + SYNTAX AclName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique Access Control List name for an entry." + ::= { ruckusAclEntry 2 } + +ruckusAclAcctEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies if accounting is enabled for the filters in this ACL." + ::= { ruckusAclEntry 3 } + +ruckusAclStandard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the type IPv4 ACL - standard or extended, if ACL is of IPv4 ACL." + ::= { ruckusAclEntry 4 } + +ruckusAclRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the creation of IPv4/IPv6/MAC ACL. + Setting this object to destroy(6) removes this IPv4/IPv6/MAC ACL. + Other values are ignored." + ::= { ruckusAclEntry 5 } + + +-- -------------------------------------------------------------------------------- +-- Ipv4 ACL Filter Table +-- -------------------------------------------------------------------------------- +ruckusIpv4AclFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusIpv4AclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ruckus Ipv4 Access Control List filters" + ::= { ruckusIpv4Filters 1 } + +ruckusIpv4AclFilterEntry OBJECT-TYPE + SYNTAX RuckusIpv4AclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the Ruckus Ipv4 Access Control List Filter table." + INDEX { ruckusAclName, ruckusIpv4AclFilterSeqNum } + ::= { ruckusIpv4AclFilterTable 1 } + +RuckusIpv4AclFilterEntry ::= SEQUENCE { + ruckusIpv4AclFilterSeqNum + Unsigned32, + ruckusIpv4AclFilterAction + AclAction, + ruckusIpv4AclFilterStdProtocol + INTEGER, + ruckusIpv4AclFilterExtProtocol + INTEGER, + ruckusIpv4AclFilterSrcAddr + InetAddressIPv4, + ruckusIpv4AclFilterSrcMask + InetAddressIPv4, + ruckusIpv4AclFilterSrcOperator + AclOperator, + ruckusIpv4AclFilterSrcPortLow + Unsigned32, + ruckusIpv4AclFilterSrcPortHigh + Unsigned32, + ruckusIpv4AclFilterDestAddr + InetAddressIPv4, + ruckusIpv4AclFilterDestMask + InetAddressIPv4, + ruckusIpv4AclFilterDestOperator + AclOperator, + ruckusIpv4AclFilterDestPortLow + Unsigned32, + ruckusIpv4AclFilterDestPortHigh + Unsigned32, + ruckusIpv4AclFilterEstablished + TruthValue, + ruckusIpv4AclFilterPrecedence + IpPrecedence, + ruckusIpv4AclFilterTos + IpTos, + ruckusIpv4AclFilterIcmpType + INTEGER, + ruckusIpv4AclFilterIcmpCode + INTEGER, + ruckusIpv4AclFilterExtIcmpType + INTEGER, + ruckusIpv4AclFilterPolicyName + AclPolicyName, + ruckusIpv4AclFilterDscpMatch + INTEGER, + ruckusIpv4AclFilterDscpForce + INTEGER, + ruckusIpv4AclFilterPriorityMatch + INTEGER, + ruckusIpv4AclFilterPriorityForce + INTEGER, + ruckusIpv4AclFilterInternalPriority + INTEGER, + ruckusIpv4AclFilterMirrorPkts + TruthValue, + ruckusIpv4AclFilterLogEnable + TruthValue, + ruckusIpv4AclFilterComments + DisplayString, + ruckusIpv4AclFilterRowStatus + RowStatus + } + +ruckusIpv4AclFilterSeqNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the sequence number for this ACL filter." + ::= { ruckusIpv4AclFilterEntry 1 } + +ruckusIpv4AclFilterAction OBJECT-TYPE + SYNTAX AclAction + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Action to take if the IP packet matches with this ACL filter." + ::= { ruckusIpv4AclFilterEntry 2 } + +ruckusIpv4AclFilterStdProtocol OBJECT-TYPE + SYNTAX INTEGER { + ip(0), + icmp(1), + igmp(2), + tcp(6), + udp(17), + ip6(41), + rsvp(46), + gre(47), + esp(50), + ospf(89), + pim(103), + extended(255) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Standard transport protocols allowed. The extended option + enables to define other protocol using the OID + ruckusIpv4AclFilterExtProtocol which takes any value." + ::= { ruckusIpv4AclFilterEntry 3 } + +ruckusIpv4AclFilterExtProtocol OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Any transport protocol other than standard protocols mentioned + with ruckusIpv4AclFilterStdProtocol OID. 0 means any protocol." + ::= { ruckusIpv4AclFilterEntry 4 } + +ruckusIpv4AclFilterSrcAddr OBJECT-TYPE + SYNTAX InetAddressIPv4 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Ipv4 address to match in packets." + ::= { ruckusIpv4AclFilterEntry 5 } + +ruckusIpv4AclFilterSrcMask OBJECT-TYPE + SYNTAX InetAddressIPv4 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Ipv4 address mask used in combination with source + IPv4 address to derive effective address for matching." + ::= { ruckusIpv4AclFilterEntry 6 } + +ruckusIpv4AclFilterSrcOperator OBJECT-TYPE + SYNTAX AclOperator + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of comparison to perform. For now, this only + applies to TCP/UDP for comparing the port number." + ::= { ruckusIpv4AclFilterEntry 7 } + +ruckusIpv4AclFilterSrcPortLow OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the TCP/UDP port number to match in packets. + If the operator is 'range', it specfies the start of range." + ::= { ruckusIpv4AclFilterEntry 8 } + +ruckusIpv4AclFilterSrcPortHigh OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used only if the operator is defined as 'range', where it + specifies the end of range" + ::= { ruckusIpv4AclFilterEntry 9 } + +ruckusIpv4AclFilterDestAddr OBJECT-TYPE + SYNTAX InetAddressIPv4 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination Ipv4 address to match in packets." + ::= { ruckusIpv4AclFilterEntry 10 } + +ruckusIpv4AclFilterDestMask OBJECT-TYPE + SYNTAX InetAddressIPv4 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination Ipv4 address mask used in combination with source + IPv4 address to derive effective address for matching." + ::= { ruckusIpv4AclFilterEntry 11 } + +ruckusIpv4AclFilterDestOperator OBJECT-TYPE + SYNTAX AclOperator + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of comparison to perform. For now, this only + applies to TCP/UDP for comparing the port number." + ::= { ruckusIpv4AclFilterEntry 12 } + +ruckusIpv4AclFilterDestPortLow OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the TCP/UDP port number to match in packets. + If the operator is 'range', it specfies the start of range." + ::= { ruckusIpv4AclFilterEntry 13 } + +ruckusIpv4AclFilterDestPortHigh OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used only if the operator is defined as 'range', where it + specifies the end of range" + ::= { ruckusIpv4AclFilterEntry 14 } + +ruckusIpv4AclFilterEstablished OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/Disable the filtering of established TCP + packets of which the ACK or RESET flag is on. This + filter only applies to TCP transport protocol." + ::= { ruckusIpv4AclFilterEntry 15 } + +ruckusIpv4AclFilterPrecedence OBJECT-TYPE + SYNTAX IpPrecedence + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the IP precedence value to match in packets." + ::= { ruckusIpv4AclFilterEntry 16 } + +ruckusIpv4AclFilterTos OBJECT-TYPE + SYNTAX IpTos + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This refers to the IP TOS value in range <0-15>, which is + the sum of numeric vlaues of the following options + 0x0 - normal TOS + 0x1 - minimum monetary cost TOS + 0x2 - maximum reliability TOS + 0x4 - maximum throughput TOS + 0x8 - minimum delay" + ::= { ruckusIpv4AclFilterEntry 17 } + +ruckusIpv4AclFilterIcmpType OBJECT-TYPE + SYNTAX INTEGER { + echoReply(0), + destUnreachable(3), + srcQuench(4), + redirect(5), + echoReq(8), + routerAdv(9), + routerSolicit(10), + timeExceed(11), + paramProblem(12), + timestampReq(13), + timestampReply(14), + infoReq(15), + infoReply(16), + addrMaskReq(17), + addrMaskReply(18), + extended(255) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the ICMP type for matching if the Protocol is ICMP. + 0 means ignore the field." + ::= { ruckusIpv4AclFilterEntry 18 } + +ruckusIpv4AclFilterIcmpCode OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ICMP Message Code value. Used in combination with ICMP Message + Type to setup an ICMP filter. This object is not used with any + other protocol. 0 means ignored. The supported values are + + Type: Echo reply + 1 = Echo reply + Type: Destination unreachable + 1 = Network unreachable + 2 = Host unreachable + 3 = Protocol unreachable + 4 = Port unreachable + 5 = Fragmentation needed by don't fragment bit set + 6 = Source route failed + 7 = Destination network unknown + 8 = Destination host unknown + 9 = Source host isolated + 10 = Destination network administratively prohibited + 11 = Destination host administratively prohibited + 12 = Network unreachable for TOS + 13 = Host unreachable for TOS + 14 = Communication administratively prohibited by filter + 15 = Host precedence violation + 16 = Precedence cutoff in effect + Type: Source quench + 1 = Source quench + Type: Redirect + 1 = Redirect for network + 2 = Redirect for host + 3 = Redirect for TOS and network + 4 = Redirect for TOS and host + Type: Echo request + 1 = Echo request + Type: Router advertisement + 1 = Router advertisement + Type: Router solicitation + 1 = Router solicitation + Type: Time exceeded + 1 = Time to live equals 0 during transmit + 2 = Time to live equals 0 during reassembly + Type: Parameter problem + 1 = IP header bad (catchall error) + 2 = Required option missing + Type: Timestamp request + 1 = Timestamp request + Type: Timestamp reply + 1 = Timestamp reply + Type: Information request + 1 = Information request + Type: Information reply + 1 = Information reply + Type: Address mask request + 1 = Address mask request + Type: Address mask reply + 1 = Address mask reply + " + ::= { ruckusIpv4AclFilterEntry 19 } + +ruckusIpv4AclFilterExtIcmpType OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Any type that can't be specified using the standard types + can be specified using this object." + ::= { ruckusIpv4AclFilterEntry 20 } + +ruckusIpv4AclFilterPolicyName OBJECT-TYPE + SYNTAX AclPolicyName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value to use in matching or marking." + ::= { ruckusIpv4AclFilterEntry 21 } + +ruckusIpv4AclFilterDscpMatch OBJECT-TYPE + SYNTAX INTEGER(0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value for matching with this filter." + ::= { ruckusIpv4AclFilterEntry 22 } + +ruckusIpv4AclFilterDscpForce OBJECT-TYPE + SYNTAX INTEGER(0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value to be used for marking in outgoing + packets matching this filter." + ::= { ruckusIpv4AclFilterEntry 23 } + +ruckusIpv4AclFilterPriorityMatch OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the 802.1P priority for matching with this filter." + ::= { ruckusIpv4AclFilterEntry 24 } + +ruckusIpv4AclFilterPriorityForce OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the 802.1P priority to be used for marking in outgoing + packets matching this filter." + ::= { ruckusIpv4AclFilterEntry 25 } + +ruckusIpv4AclFilterInternalPriority OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "QoS priority option for this filter." + ::= { ruckusIpv4AclFilterEntry 26 } + +ruckusIpv4AclFilterMirrorPkts OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mirror packets matching ACL permit clause." + DEFVAL { false } + ::= { ruckusIpv4AclFilterEntry 27 } + +ruckusIpv4AclFilterLogEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies if logging is enabled for the filter." + ::= { ruckusIpv4AclFilterEntry 28 } + +ruckusIpv4AclFilterComments OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark description of individual Access Control List entry." + ::= { ruckusIpv4AclFilterEntry 29 } + +ruckusIpv4AclFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the creation of IPv4 ACL filter. + Setting this object to destroy(6) removes this IPv4 ACL filter. + Other values are ignored." + ::= { ruckusIpv4AclFilterEntry 30 } + + +-- -------------------------------------------------------------------------------- +-- Ipv6 ACL Filter Table +-- -------------------------------------------------------------------------------- +ruckusIpv6AclFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusIpv6AclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ruckus Ipv6 Access Control List Filters" + ::= { ruckusIpv6Filters 1 } + +ruckusIpv6AclFilterEntry OBJECT-TYPE + SYNTAX RuckusIpv6AclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the Ruckus Ipv6 Access Control List Filter table." + INDEX { ruckusAclName, ruckusIpv6AclFilterSeqNum } + ::= { ruckusIpv6AclFilterTable 1 } + +RuckusIpv6AclFilterEntry ::= SEQUENCE { + ruckusIpv6AclFilterSeqNum + Unsigned32, + ruckusIpv6AclFilterAction + AclAction, + ruckusIpv6AclFilterStdProtocol + INTEGER, + ruckusIpv6AclFilterExtProtocol + INTEGER, + ruckusIpv6AclFilterSrcAddr + InetAddressIPv6, + ruckusIpv6AclFilterSrcPrefixLen + Unsigned32, + ruckusIpv6AclFilterSrcOperator + AclOperator, + ruckusIpv6AclFilterSrcPortLow + Unsigned32, + ruckusIpv6AclFilterSrcPortHigh + Unsigned32, + ruckusIpv6AclFilterDestAddr + InetAddressIPv6, + ruckusIpv6AclFilterDestPrefixLen + Unsigned32, + ruckusIpv6AclFilterDestOperator + AclOperator, + ruckusIpv6AclFilterDestPortLow + Unsigned32, + ruckusIpv6AclFilterDestPortHigh + Unsigned32, + ruckusIpv6AclFilterEstablished + TruthValue, + ruckusIpv6AclFilterIcmpType + INTEGER, + ruckusIpv6AclFilterIcmpCode + INTEGER, + ruckusIpv6AclFilterExtIcmpType + INTEGER, + ruckusIpv6AclFilterPolicyName + AclPolicyName, + ruckusIpv6AclFilterDscpMatch + INTEGER, + ruckusIpv6AclFilterDscpForce + INTEGER, + ruckusIpv6AclFilterPriorityMatch + INTEGER, + ruckusIpv6AclFilterPriorityForce + INTEGER, + ruckusIpv6AclFilterInternalPriority + INTEGER, + ruckusIpv6AclFilterFragments + TruthValue, + ruckusIpv6AclFilterSourceRoute + TruthValue, + ruckusIpv6AclFilterMirrorPkts + TruthValue, + ruckusIpv6AclFilterLogEnable + TruthValue, + ruckusIpv6AclFilterComments + DisplayString, + ruckusIpv6AclFilterRowStatus + RowStatus + } + +ruckusIpv6AclFilterSeqNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the sequence number for this ACL filter." + ::= { ruckusIpv6AclFilterEntry 1 } + +ruckusIpv6AclFilterAction OBJECT-TYPE + SYNTAX AclAction + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Action to take if the IPv6 packet matches with this + access control list filter." + ::= { ruckusIpv6AclFilterEntry 2 } + +ruckusIpv6AclFilterStdProtocol OBJECT-TYPE + SYNTAX INTEGER { + tcp(6), + udp(17), + ip6(41), + esp(50), + ahp(51), + icmp(58), + sctp(132), + extended(255) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Standard transport protocols allowed. The extended option + enables to define other protocol using the OID + ruckusIpv6AclFilterExtProtocol which takes any value." + ::= { ruckusIpv6AclFilterEntry 3 } + +ruckusIpv6AclFilterExtProtocol OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Any transport protocol other than standard protocols mentioned + with ruckusIpv6AclFilterStdProtocol OID. 0 means any protocol." + ::= { ruckusIpv6AclFilterEntry 4 } + +ruckusIpv6AclFilterSrcAddr OBJECT-TYPE + SYNTAX InetAddressIPv6 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Ipv6 address to match in packets." + ::= { ruckusIpv6AclFilterEntry 5 } + +ruckusIpv6AclFilterSrcPrefixLen OBJECT-TYPE + SYNTAX Unsigned32(0..64) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Ipv6 address prefix length." + DEFVAL {64} + ::= { ruckusIpv6AclFilterEntry 6 } + +ruckusIpv6AclFilterSrcOperator OBJECT-TYPE + SYNTAX AclOperator + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of comparison to perform. For now, this only + applies to TCP/UDP for comparing the port number." + ::= { ruckusIpv6AclFilterEntry 7 } + +ruckusIpv6AclFilterSrcPortLow OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the TCP/UDP port number to match in packets. + If the operator is 'range', it specfies the start of range." + ::= { ruckusIpv6AclFilterEntry 8 } + +ruckusIpv6AclFilterSrcPortHigh OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used only if the operator is defined as 'range', where it + specifies the end of range" + ::= { ruckusIpv6AclFilterEntry 9 } + +ruckusIpv6AclFilterDestAddr OBJECT-TYPE + SYNTAX InetAddressIPv6 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination Ipv6 address to match in packets." + ::= { ruckusIpv6AclFilterEntry 10 } + +ruckusIpv6AclFilterDestPrefixLen OBJECT-TYPE + SYNTAX Unsigned32(0..64) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination Ipv6 address prefix length." + DEFVAL {64} + ::= { ruckusIpv6AclFilterEntry 11 } + +ruckusIpv6AclFilterDestOperator OBJECT-TYPE + SYNTAX AclOperator + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of comparison to perform. For now, this only + applies to TCP/UDP for comparing the port number." + ::= { ruckusIpv6AclFilterEntry 12 } + +ruckusIpv6AclFilterDestPortLow OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the TCP/UDP port number to match in packets. + If the operator is 'range', it specfies the start of range." + ::= { ruckusIpv6AclFilterEntry 13 } + +ruckusIpv6AclFilterDestPortHigh OBJECT-TYPE + SYNTAX Unsigned32(0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used only if the operator is defined as 'range', where it + specifies the end of range" + ::= { ruckusIpv6AclFilterEntry 14 } + +ruckusIpv6AclFilterEstablished OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable/Disable the filtering of established TCP packets + of which the ACK or RESET flag is on. This filter only + applies to TCP transport protocol." + ::= { ruckusIpv6AclFilterEntry 15 } + +ruckusIpv6AclFilterIcmpType OBJECT-TYPE + SYNTAX INTEGER { + destUnreachable(1), + largePackets(2), + timeExceed(3), + paramProblem(4), + echoReq(128), + echoReply(129), + mldQueries(130), + mldReport(131), + mldReduction(132), + routerSolicit(133), + routerAdv(134), + neighborSolicit(135), + neighborAdv(136), + routerRenumbering(138), + extended(255) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the ICMP6 type for matching if the Protocol is ICMP6. + 0 means ignore the field." + ::= { ruckusIpv6AclFilterEntry 16 } + +ruckusIpv6AclFilterIcmpCode OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ICMP Message Code value. Used in combination with ICMP Message + Type to setup an ICMP filter. This object is not used with any + other protocol. 0 means ignored. The supported values are + + Type: Echo reply + 1 = Echo reply + Type: Destination unreachable + 1 = Network unreachable + 2 = Host unreachable + 3 = Protocol unreachable + 4 = Port unreachable + 5 = Fragmentation needed by don't fragment bit set + 6 = Source route failed + 7 = Destination network unknown + 8 = Destination host unknown + 9 = Source host isolated + 10 = Destination network administratively prohibited + 11 = Destination host administratively prohibited + 12 = Network unreachable for TOS + 13 = Host unreachable for TOS + 14 = Communication administratively prohibited by filter + 15 = Host precedence violation + 16 = Precedence cutoff in effect + Type: Echo request + 1 = Echo request + Type: Router advertisement + 1 = Router advertisement + Type: Router solicitation + 1 = Router solicitation + Type: Time exceeded + 1 = Time to live equals 0 during transmit + 2 = Time to live equals 0 during reassembly + Type: Parameter problem + 1 = IP header bad (catchall error) + 2 = Required option missing + Type: Timestamp request + 1 = Timestamp request + " + ::= { ruckusIpv6AclFilterEntry 17 } + +ruckusIpv6AclFilterExtIcmpType OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Any type that can't be specified using the standard types + can be specified using this object." + ::= { ruckusIpv6AclFilterEntry 18 } + +ruckusIpv6AclFilterPolicyName OBJECT-TYPE + SYNTAX AclPolicyName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value to use in matching or marking." + ::= { ruckusIpv6AclFilterEntry 19 } + +ruckusIpv6AclFilterDscpMatch OBJECT-TYPE + SYNTAX INTEGER(0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value for matching with this filter." + ::= { ruckusIpv6AclFilterEntry 20 } + +ruckusIpv6AclFilterDscpForce OBJECT-TYPE + SYNTAX INTEGER(0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the DSCP value to be used for marking in outgoing + packets matching this filter." + ::= { ruckusIpv6AclFilterEntry 21 } + +ruckusIpv6AclFilterPriorityMatch OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the 802.1P priority for matching with this filter." + ::= { ruckusIpv6AclFilterEntry 22 } + +ruckusIpv6AclFilterPriorityForce OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the 802.1P priority to be used for marking in outgoing + packets matching this filter." + ::= { ruckusIpv6AclFilterEntry 23 } + +ruckusIpv6AclFilterInternalPriority OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "QoS priority option for this filter." + ::= { ruckusIpv6AclFilterEntry 24 } + +ruckusIpv6AclFilterFragments OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Match IPv6 fragments with non-zero fragment offset in V6 packets + matching this ACL permit clause." + DEFVAL { false } + ::= { ruckusIpv6AclFilterEntry 25 } + +ruckusIpv6AclFilterSourceRoute OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Match only rource routed packets matching this ACL permit clause." + DEFVAL { false } + ::= { ruckusIpv6AclFilterEntry 26 } + +ruckusIpv6AclFilterMirrorPkts OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mirror packets matching ACL permit clause." + DEFVAL { false } + ::= { ruckusIpv6AclFilterEntry 27 } + +ruckusIpv6AclFilterLogEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies if logging is enabled for the filter." + ::= { ruckusIpv6AclFilterEntry 28 } + +ruckusIpv6AclFilterComments OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark description of individual Access Control List entry." + ::= { ruckusIpv6AclFilterEntry 29 } + +ruckusIpv6AclFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the creation of IPv6 ACL filter. + Setting this object to destroy(6) removes this IPv6 ACL filter. + Other values are ignored." + ::= { ruckusIpv6AclFilterEntry 30 } + +-- -------------------------------------------------------------------------------- +-- MAC ACL Filter Table +-- -------------------------------------------------------------------------------- +ruckusMacAclFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusMacAclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ruckus Mac Access Control List Filters. MAC ACLs filter + traffic based on any of the following fields: + - Source MAC address and source MAC mask + - Destination MAC address and destination MAC mask + - VLAN ID + - Ethernet type" + ::= { ruckusMacFilters 1 } + +ruckusMacAclFilterEntry OBJECT-TYPE + SYNTAX RuckusMacAclFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the Ruckus MAC Access Control List Filter table." + INDEX { ruckusAclName, ruckusMacAclFilterSeqNum } + ::= { ruckusMacAclFilterTable 1 } + +RuckusMacAclFilterEntry ::= SEQUENCE { + ruckusMacAclFilterSeqNum + Unsigned32, + ruckusMacAclFilterAction + AclAction, + ruckusMacAclFilterSrcAddr + MacAddress, + ruckusMacAclFilterSrcMask + MacAddress, + ruckusMacAclFilterDestAddr + MacAddress, + ruckusMacAclFilterDestMask + MacAddress, + ruckusMacAclFilterEtherType + INTEGER, + ruckusMacAclFilterExtEtherType + EtherType, + ruckusMacAclFilterMirrorPkts + TruthValue, + ruckusMacAclFilterLogEnable + TruthValue, + ruckusMacAclFilterRowStatus + RowStatus + } + +ruckusMacAclFilterSeqNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the sequence number for this ACL filter." + ::= { ruckusMacAclFilterEntry 1 } + +ruckusMacAclFilterAction OBJECT-TYPE + SYNTAX AclAction + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Action to take if the L2 packet matches with this filter." + ::= { ruckusMacAclFilterEntry 2 } + +ruckusMacAclFilterSrcAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source MAC address to match in the incoming L2 packet." + DEFVAL { '000000000000'H } + ::= { ruckusMacAclFilterEntry 3 } + +ruckusMacAclFilterSrcMask OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source MAC address mask to apply with source address to + derive the MAC address for filter action. For example, + to match on the first two bytes of MAC aabb.ccdd.eeff, + the mask should be ffff.0000.0000. In this case, the + filter matches all source MACs that contain 'aabb' as + the first two bytes and any values in remaining address." + DEFVAL { '000000000000'H } + ::= { ruckusMacAclFilterEntry 4 } + +ruckusMacAclFilterDestAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination MAC address to match in the incoming L2 packet." + DEFVAL { '000000000000'H } + ::= { ruckusMacAclFilterEntry 5 } + +ruckusMacAclFilterDestMask OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination MAC address mask to apply with destination address + to derive the MAC address for filter action. For example, to + match on the first two bytes of MAC aabb.ccdd.eeff, the mask + should be ffff.0000.0000. In this case, the filter matches + all source MACs that contain 'aabb' as the first two bytes + and any values in remaining address." + DEFVAL { '000000000000'H } + ::= { ruckusMacAclFilterEntry 6 } + +ruckusMacAclFilterEtherType OBJECT-TYPE + SYNTAX INTEGER { + arp(1), + ipv4(2), + ipv6(3), + extended(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Ethernet Type to match in the incoming packet, if specified. + The extended option enables to define other types sing the + OID ruckusMacAclFilterExtEtherType which takes any value." + DEFVAL { arp } + ::= { ruckusMacAclFilterEntry 7 } + +ruckusMacAclFilterExtEtherType OBJECT-TYPE + SYNTAX EtherType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Any EtherType other than standard protocols mentioned + with ruckusMacAclFilterEtherType OID. 0 means any protocol." + ::= { ruckusMacAclFilterEntry 8 } + +ruckusMacAclFilterMirrorPkts OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mirror packets matching ACL permit clause." + DEFVAL { false } + ::= { ruckusMacAclFilterEntry 9 } + +ruckusMacAclFilterLogEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies if logging is enabled for this filter." + ::= { ruckusMacAclFilterEntry 10 } + +ruckusMacAclFilterRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the creation of MAC ACL filter. + Setting this object to destroy(6) removed this MAC ACL filter. + Other values are ignored." + ::= { ruckusMacAclFilterEntry 11 } + + +-- -------------------------------------------------------------------------------- +-- ACL Port Bind Table +-- -------------------------------------------------------------------------------- +ruckusAclIfBindTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAclIfBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of IPv4/IPv6/MAC ACL bindings to a port." + ::= { ruckusAclBindings 1 } + +ruckusAclIfBindEntry OBJECT-TYPE + SYNTAX RuckusAclIfBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the IPv4/IPv6/MAC ACL bindings for a gievn port." + INDEX { ruckusAclIfBindPort, ruckusAclIfBindType, ruckusAclIfBindDirection } + ::= { ruckusAclIfBindTable 1 } + +RuckusAclIfBindEntry ::= SEQUENCE { + ruckusAclIfBindPort + InterfaceIndex, + ruckusAclIfBindType + AclType, + ruckusAclIfBindDirection + AclDirection, + ruckusAclIfBindName + AclName, + ruckusAclIfBindLog + TruthValue, + ruckusAclIfBindRowStatus + RowStatus + } + +ruckusAclIfBindPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The port on where this ACL binding is applied on." + ::= { ruckusAclIfBindEntry 1 } + +ruckusAclIfBindType OBJECT-TYPE + SYNTAX AclType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Type of the ACL, this binding describes on the port." + ::= { ruckusAclIfBindEntry 2 } + +ruckusAclIfBindDirection OBJECT-TYPE + SYNTAX AclDirection + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Direction in which this ACL is applied on the port." + ::= { ruckusAclIfBindEntry 3 } + +ruckusAclIfBindName OBJECT-TYPE + SYNTAX AclName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defined ACL name to bind on port in the given direction." + ::= { ruckusAclIfBindEntry 4 } + +ruckusAclIfBindLog OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable or disable logging on the port for this ACL." + DEFVAL { false } + ::= { ruckusAclIfBindEntry 5 } + +ruckusAclIfBindRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the binding of IPv4 or IPv6 or + MAC ACL with a given port. Setting this object to destroy(6) + unbinds this IPv4 or IPv6 or MAC ACL from the port. + Other values are ignored." + ::= { ruckusAclIfBindEntry 6 } + +-- -------------------------------------------------------------------------------- +-- ACL VLAN Bind Table +-- -------------------------------------------------------------------------------- +ruckusAclVlanBindTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAclVlanBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of IPv4/IPv6/MAC ACL bindings to a VLAN" + ::= { ruckusAclBindings 2 } + +ruckusAclVlanBindEntry OBJECT-TYPE + SYNTAX RuckusAclVlanBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the IPv4/IPv6/MAC ACL bindings for a gievn VLAN." + INDEX { ruckusAclVlanBindId, ruckusAclVlanBindType, ruckusAclVlanBindDirection } + ::= { ruckusAclVlanBindTable 1 } + +RuckusAclVlanBindEntry ::= SEQUENCE { + ruckusAclVlanBindId + VlanId, + ruckusAclVlanBindType + AclType, + ruckusAclVlanBindDirection + AclDirection, + ruckusAclVlanBindName + AclName, + ruckusAclVlanBindLog + TruthValue, + ruckusAclVlanBindRowStatus + RowStatus + } + +ruckusAclVlanBindId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN where this ACL binding is applied." + ::= { ruckusAclVlanBindEntry 1 } + +ruckusAclVlanBindType OBJECT-TYPE + SYNTAX AclType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Type of the ACL, this binding describes on the VLAN." + ::= { ruckusAclVlanBindEntry 2 } + +ruckusAclVlanBindDirection OBJECT-TYPE + SYNTAX AclDirection + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Direction in which this ACL is applied on the VLAN." + ::= { ruckusAclVlanBindEntry 3 } + +ruckusAclVlanBindName OBJECT-TYPE + SYNTAX AclName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defined ACL name to bind on VLAN in the given direction." + ::= { ruckusAclVlanBindEntry 4 } + +ruckusAclVlanBindLog OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable or disable logging on the VLAN for this ACL." + DEFVAL { false } + ::= { ruckusAclVlanBindEntry 5 } + +ruckusAclVlanBindRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the binding of IPv4 or IPv6 or + MAC ACL with a given VLAN. Setting this object to destroy(6) + unbinds this IPv4 or IPv6 or MAC ACL from the VLAN. + Other values are ignored." + ::= { ruckusAclVlanBindEntry 6 } + +-- -------------------------------------------------------------------------------- +-- ACL VLAN PORT (Vport) Bind Table +-- -------------------------------------------------------------------------------- +ruckusAclVPortBindTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAclVPortBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of IPv4/IPv6/MAC ACL bindings to a port on VLAN" + ::= { ruckusAclBindings 3 } + +ruckusAclVPortBindEntry OBJECT-TYPE + SYNTAX RuckusAclVPortBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the IPv4/IPv6/MAC ACL bindings for a port in a VLAN." + INDEX { ruckusAclVPortBindId, ruckusAclVPortBindPort, ruckusAclVPortBindType, ruckusAclVPortBindDirection } + ::= { ruckusAclVPortBindTable 1 } + +RuckusAclVPortBindEntry ::= SEQUENCE { + ruckusAclVPortBindId + VlanId, + ruckusAclVPortBindPort + InterfaceIndex, + ruckusAclVPortBindType + AclType, + ruckusAclVPortBindDirection + AclDirection, + ruckusAclVPortBindName + AclName, + ruckusAclVPortBindLog + TruthValue, + ruckusAclVPortBindRowStatus + RowStatus + } + +ruckusAclVPortBindId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN where this ACL binding is applied on." + ::= { ruckusAclVPortBindEntry 1 } + +ruckusAclVPortBindPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The port in the VLAN where this ACL binding is applied on." + ::= { ruckusAclVPortBindEntry 2 } + +ruckusAclVPortBindType OBJECT-TYPE + SYNTAX AclType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Type of the ACL, this binding describes on the port in a VLAN." + ::= { ruckusAclVPortBindEntry 3 } + +ruckusAclVPortBindDirection OBJECT-TYPE + SYNTAX AclDirection + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Direction in which this ACL is applied on the port in a VLAN." + ::= { ruckusAclVPortBindEntry 4 } + +ruckusAclVPortBindName OBJECT-TYPE + SYNTAX AclName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defined ACL name to bind on port in a VLAN in the given direction." + ::= { ruckusAclVPortBindEntry 5 } + +ruckusAclVPortBindLog OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enable or disable logging on the port in a VLAN for this ACL." + DEFVAL { false } + ::= { ruckusAclVPortBindEntry 6 } + +ruckusAclVPortBindRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to installation and + removal conventions for conceptual rows. Setting this object + to createAndGo(4) results in the binding of IPv4 or IPv6 or + MAC ACL on a port in a given VLAN. Setting this object to + destroy(6) unbinds this IPv4 or IPv6 or MAC ACL from the port + in the given VLAN. Other values are ignored." + ::= { ruckusAclVPortBindEntry 7 } + +-- -------------------------------------------------------------------------------- +-- ACL MIB Conformance +-- -------------------------------------------------------------------------------- +ruckusAclCompliances OBJECT IDENTIFIER ::= { ruckusAclConformance 1 } +ruckusAclGroups OBJECT IDENTIFIER ::= { ruckusAclConformance 2 } + +ruckusAclCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entities which + implement RUCKUS-ACL-MIB." + MODULE -- this module + MANDATORY-GROUPS { ruckusAclGroup } + ::= { ruckusAclCompliances 1 } + +-- ---------------------- +-- Units of Conformance +-- ---------------------- +ruckusAclGroup OBJECT-GROUP + OBJECTS { + ruckusAclAcctEnable, + ruckusAclRowStatus, + + ruckusIpv4AclFilterAction, + ruckusIpv4AclFilterStdProtocol, + ruckusIpv4AclFilterExtProtocol, + ruckusIpv4AclFilterSrcAddr, + ruckusIpv4AclFilterSrcMask, + ruckusIpv4AclFilterSrcOperator, + ruckusIpv4AclFilterSrcPortLow, + ruckusIpv4AclFilterSrcPortHigh, + ruckusIpv4AclFilterDestAddr, + ruckusIpv4AclFilterDestMask, + ruckusIpv4AclFilterDestOperator, + ruckusIpv4AclFilterDestPortLow, + ruckusIpv4AclFilterDestPortHigh, + ruckusIpv4AclFilterEstablished, + ruckusIpv4AclFilterPrecedence, + ruckusIpv4AclFilterTos, + ruckusIpv4AclFilterIcmpType, + ruckusIpv4AclFilterIcmpCode, + ruckusIpv4AclFilterPolicyName, + ruckusIpv4AclFilterDscpMatch, + ruckusIpv4AclFilterDscpForce, + ruckusIpv4AclFilterPriorityMatch, + ruckusIpv4AclFilterPriorityForce, + ruckusIpv4AclFilterInternalPriority, + ruckusIpv4AclFilterMirrorPkts, + ruckusIpv4AclFilterLogEnable, + ruckusIpv4AclFilterComments, + ruckusIpv4AclFilterRowStatus, + + ruckusIpv6AclFilterAction, + ruckusIpv6AclFilterStdProtocol, + ruckusIpv6AclFilterExtProtocol, + ruckusIpv6AclFilterSrcAddr, + ruckusIpv6AclFilterSrcPrefixLen, + ruckusIpv6AclFilterSrcOperator, + ruckusIpv6AclFilterSrcPortLow, + ruckusIpv6AclFilterSrcPortHigh, + ruckusIpv6AclFilterDestAddr, + ruckusIpv6AclFilterDestPrefixLen, + ruckusIpv6AclFilterDestOperator, + ruckusIpv6AclFilterDestPortLow, + ruckusIpv6AclFilterDestPortHigh, + ruckusIpv6AclFilterEstablished, + ruckusIpv6AclFilterIcmpType, + ruckusIpv6AclFilterIcmpCode, + ruckusIpv6AclFilterPolicyName, + ruckusIpv6AclFilterDscpMatch, + ruckusIpv6AclFilterDscpForce, + ruckusIpv6AclFilterPriorityMatch, + ruckusIpv6AclFilterPriorityForce, + ruckusIpv6AclFilterInternalPriority, + ruckusIpv6AclFilterFragments, + ruckusIpv6AclFilterSourceRoute, + ruckusIpv6AclFilterMirrorPkts, + ruckusIpv6AclFilterLogEnable, + ruckusIpv6AclFilterComments, + ruckusIpv6AclFilterRowStatus, + + ruckusMacAclFilterAction, + ruckusMacAclFilterSrcAddr, + ruckusMacAclFilterSrcMask, + ruckusMacAclFilterDestAddr, + ruckusMacAclFilterDestMask, + ruckusMacAclFilterEtherType, + ruckusMacAclFilterExtEtherType, + ruckusMacAclFilterMirrorPkts, + ruckusMacAclFilterLogEnable, + ruckusMacAclFilterRowStatus, + + ruckusAclIfBindName, + ruckusAclIfBindLog, + ruckusAclIfBindRowStatus, + + ruckusAclVlanBindName, + ruckusAclVlanBindLog, + ruckusAclVlanBindRowStatus, + + ruckusAclVPortBindName, + ruckusAclVPortBindLog, + ruckusAclVPortBindRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects that provide ACL information on a given unit." + ::= { ruckusAclGroups 1 } +END diff --git a/foundry/RUCKUS-AUTH-MIB.mib b/foundry/RUCKUS-AUTH-MIB.mib new file mode 100644 index 000000000..615c23b9b --- /dev/null +++ b/foundry/RUCKUS-AUTH-MIB.mib @@ -0,0 +1,2748 @@ +RUCKUS-AUTH-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Counter32, Unsigned32, Counter64, + NOTIFICATION-TYPE + FROM SNMPv2-SMI -- [RFC2578] + ifIndex, InterfaceIndex, + InterfaceIndexOrZero + FROM IF-MIB -- [RFC2863] + DisplayString, + MacAddress, + TruthValue, + RowStatus, + TEXTUAL-CONVENTION + FROM SNMPv2-TC -- [RFC2579] + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB -- [RFC4001] + EnabledStatus + FROM P-BRIDGE-MIB + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB; + +ruckusAuthMIB MODULE-IDENTITY + LAST-UPDATED "202004170000Z" -- Apr 17, 2020 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: + https://support.ruckuswireless.com/contact-us" + DESCRIPTION + "Management Information for configuration/querying + of Flexible authentication which consists of 802.1X, + MAC-Auth and Web-Auth. + It is grouped into five MIBs - + 1. Global level Auth configuration + 2. Global level Dot1x configuration + 3. Global level MacAuth configuration + 4. Global level WebAuth configuration + 5. Port level Auth configuration + 6. Auth Session information + 7. Auth Session Stats information + 8. Dot1x Auth Session Stats information + + Copyright 1996-2019 Ruckus Wireless, Inc. + All rights reserved. + This Ruckus Wireless, Inc SNMP MIB Specification + embodies Ruckus Wireless, Inc' confidential and + proprietary intellectual property. Ruckus Wireless, + Inc retains all title and ownership in the + Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus + Wireless, Inc makes no warranty, either express or + implied, as to the use, operation, condition, or + performance of the specification, and any unintended + consequence it may on the user environment." + REVISION "202004170000Z" + DESCRIPTION + "Initial Version" + ::= { snSwitch 44 } + +ruckusAuthNotification OBJECT IDENTIFIER ::= { ruckusAuthMIB 0 } +ruckusAuthObjects OBJECT IDENTIFIER ::= { ruckusAuthMIB 1 } +ruckusAuthConformance OBJECT IDENTIFIER ::= { ruckusAuthMIB 2 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- +VlanId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An ID used to represent VLAN identifier in the + system for both untagged and tagged VLANs packets). + When an object is not configured, this could be 0." + SYNTAX INTEGER (0 | 1..4094) + +Dot1xAuthState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The authenticator(PAE) state machine values as + described below. + + other(1): + Anything other than following states + initialize(2): + PAE state machine is being initialized + disconnected(3): + Explicit logoff request is received from the + supplicant, or the number of permissible reauth + attempts are exceeded + connecting(4): + Attempting to establish communication with + Supplicant + authenticating(5): + Supplicant is being authenticated + authenticated(6): + The Authenticator has successfully authenticated + the Supplicant. + aborting(7): + The authentication process is aborted for + reasons like receipt of reauth request, an + EAPOL-Start frame, an EAPOL-Logoff frame, or + authentication timeout + held(8): + This state is entered from 'authenticating' + state following authentication failure. When + quietWhile timer expires, the state machine + moves 'connecting' state. In this state, all + EAPOL packets are ignored and discarded, so as + to prevent brute force attacks. + forceAuth(9): + Port is set to Authorized state, so an EAP + Success packet is sent to the Supplicant + forceUnauth(10): + Port is set to Unauthorized state, and an EAP + Failure packet is sent to the Supplicant. When + EAP-Start messages are received from the + Supplicant, the state is re-entered and + subsequent EAP Failure mssages are sent." + SYNTAX INTEGER { + other(1), + initialize(2), + disconnected(3), + connecting(4), + authenticating(5), + authenticated(6), + aborting(7), + held(8), + forceAuth(9), + forceUnauth(10) + } + +RuckusAuthMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes the authentication modes supported with + Ruckus FlexAuth implementation. + + singleUntagged(1): + multiple clients are allowed, but all must belong + to one VLAN + multipleUntagged(2): + multiple clients are allowed and each client can + belong to different VLAN + singleHost(3): + only one host is allowed and phones are allowed + without authentication + multipleHosts(4): + multiple hosts are allowed, but all the hosts are + authorized automatically after the first host is + authenticated + + This mode can be set globally level and also at port + level if some some ports like to have different + auth-mode than globally configured mode." + SYNTAX INTEGER { + singleUntagged(1), + multipleUntagged(2), + singleHost(3), + multipleHosts(4) + } + +RuckusAuthOrder ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes which authentication methods to be + attempted in series of methods. Subsequent methods + are tried depending on the outcome of the previous + method and several rules are defined which are not + explined here. + + dot1xMauth(1): + IEEE 802.1X protocol (typically used for PCs, + workstations) followed by MAC-Auth method + mauthDot1x(2): + MAC-Auth which uses MAC address user-name + (typically used for phones, fax m/cs, APs, + switches) followed by DOt1x method + + This order of methods can be set globally and also + at port level if some some ports like to have + different auth-method order than globally + configured." + SYNTAX INTEGER { + dot1xMauth(1), + mauthDot1x(2) + } + +RuckusAuthFailAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes the action to be taken, when the clients + fail the authentication. + + blockTraffic(1): + Clients are blocked access to the network + restrictVlan(2): + Clients are placed in the configured restrict + VLAN, so they have limited access." + SYNTAX INTEGER { + blockTraffic(1), + restrictVlan(2) + } + +RuckusAuthTimeoutAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes the action to be taken, when the + authenticator times out for various readons like + server busy, network access, etc. + + failure(1): + The action taken is specified by the + ruckusAuthFailAction object + success(2): + Clients are allowed access to the network + in the default VLAN + criticalVlan(3): + Clients are placed in the configured critical + VLAN, so they have limited access. + other(4): + Authentication keeps happening in a loop." + SYNTAX INTEGER { + failure(1), + success(2), + criticalVlan(3), + other(4) + } + +RuckusAuthAging ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Describes, if denied and permitted sessions are + enabled or disabled for aging. A bit field of '1' + indicates enabled, otherwise disabled." + SYNTAX BITS { + deniedSessions(0), + permittedSessions(1) + } + +-- ------------------------------------------------------------ +-- Groups in the FlexAuth MIB +-- ------------------------------------------------------------ +ruckusAuthConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 1 } +ruckusDot1xAuthConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 2 } +ruckusMacAuthConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 3 } +ruckusWebAuthConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 4 } +ruckusAuthPortConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 5 } +ruckusAuthFilterConfig OBJECT IDENTIFIER ::= { ruckusAuthObjects 6 } +ruckusAuthSessions OBJECT IDENTIFIER ::= { ruckusAuthObjects 7 } +ruckusAuthStatistics OBJECT IDENTIFIER ::= { ruckusAuthObjects 8 } + +-- ------------------------------------------------------------ +-- FlexAuth Global Configuration +-- This applies to Dot1x and MAC authentication also +-- ------------------------------------------------------------ +ruckusAuthDefaultVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This default VLAN is used to place all the FlexAuth + enabled ports, so this VLAN acts as a VLAN for the + clients to belong to, when authentication server + doesn't assign any VLANs. + + A value of zero for this object indicates no default + Vlan configured for this Ruckus device." + ::= { ruckusAuthConfig 1 } + +ruckusAuthVoiceVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This voice VLAN is used to advertise through + LLDP/CDP on the ports, when connected devices are + detected as Phones and authentication server doesn't + assign any Voice VLAN. + + A value of zero for this object indicates no Voice + Vlan configured for this Ruckus device." + ::= { ruckusAuthConfig 2 } + +ruckusAuthCriticalVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This VLAN is used to place the clients, when the + authentication server times out and the timeout + action is configired as 'critical', so the clients + have limited access. + + Refer to ruckusAuthTimeoutAction object for + timeout-action choices. + + A value of zero for this object indicates no + Critical Vlan configured for this Ruckus device." + ::= { ruckusAuthConfig 3 } + +ruckusAuthRestrictVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This VLAN is used to place the clients, when the + clients fail the authentication and the failure + action is configured as 'restrict', so the clients + have limited access. + + Refer to ruckusAuthFailAction object for + fail-action choices. + + A value of zero for this object indicates no + Restrict Vlan configured for this Ruckus device." + ::= { ruckusAuthConfig 4 } + +ruckusAuthEnable OBJECT-TYPE + SYNTAX BITS { + dot1x(0), + macAuth(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies, which authentication methods are enabled + globally. Unless the method is enabled globally, the + same can't be enabled at port level. A bit field of + '1' indicates enabled, otherwise disabled." + ::= { ruckusAuthConfig 5 } + +ruckusAuthMode OBJECT-TYPE + SYNTAX RuckusAuthMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the authentication mode for all the + FlexAuth enabled ports." + DEFVAL { singleUntagged } + ::= { ruckusAuthConfig 6 } + +ruckusAuthMethods OBJECT-TYPE + SYNTAX RuckusAuthOrder + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies which authentication methods to be + attempted in series of methods for all FlexAuth + enabled ports." + DEFVAL { dot1xMauth } + ::= { ruckusAuthConfig 7 } + +ruckusAuthMaxSessions OBJECT-TYPE + SYNTAX Unsigned32 (1..1024) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum number of authenticated + clients allowed on a port. This doesn't include the + clients allowed due to authentication failure and + timeout policies." + DEFVAL { 2 } + ::= { ruckusAuthConfig 8 } + +ruckusAuthFailAction OBJECT-TYPE + SYNTAX RuckusAuthFailAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be taken, when the clients + fail the authentication." + DEFVAL { blockTraffic } + ::= { ruckusAuthConfig 9 } + +ruckusAuthTimeoutAction OBJECT-TYPE + SYNTAX RuckusAuthTimeoutAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be taken, when the + authentication server times out." + DEFVAL { other } + ::= { ruckusAuthConfig 10 } + +ruckusAuthReauthEnable OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The reauthentication control for all the FlexAuth + enabled ports. Setting this object to 'enabled' + causes every FlexAuth enabled port to reauthenticate + the devices connecting to the port, after every + period of time specified by the object + ruckusAuthReauthPeriod. Setting this object to + 'disabled' disables the reauthentication." + DEFVAL { disabled } + ::= { ruckusAuthConfig 11 } + +ruckusAuthReauthPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "How often to re-authenticates clients, when periodic + re-authentication is enabled." + DEFVAL { 3600 } + ::= { ruckusAuthConfig 12 } + +ruckusAuthReauthTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "How often to re-authenticates clients, when the + clients were allowed due to authentication server + timeout. Value of 0 disables the re-authentication." + DEFVAL { 300 } + ::= { ruckusAuthConfig 13 } + +ruckusAuthIdleTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time to keep the sessions in the + Ruckus device, after the inactivity detection time + expired in the hardware. If the clients start the + traffic in this time, they need not authenticate + again, otherwise they would have to authenticate, + once the session gets deleted. + + This can be set from authentication server for each + client and value of 0 is allowed to disable the + aging." + DEFVAL { 120 } + ::= { ruckusAuthConfig 14 } + +ruckusAuthDeniedTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time to keep the denied sessions in + the Ruckus device for the clients which are blocked + as they failed authentication. When the clients + start the traffic again, they will be authenticated." + DEFVAL { 70 } + ::= { ruckusAuthConfig 15 } + +ruckusAuthAging OBJECT-TYPE + SYNTAX RuckusAuthAging + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies, if denied and permitted sessions are + enabled or disabled for aging. Aging is enabled by + default." + ::= { ruckusAuthConfig 16 } + +ruckusAuthDefaultV4IngressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the default User Access List (ACL) applied in the + Ingress direction for the IPv4 traffic for sessins when ACLs + are not dynamically assigned through RADIUS." + ::= { ruckusAuthConfig 17 } + +ruckusAuthDefaultV4EgressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the default User Access List (ACL) applied in the + Egress direction for the IPv4 traffic for sessins when ACLs + are not dynamically assigned through RADIUS." + ::= { ruckusAuthConfig 18 } + +ruckusAuthDefaultV6IngressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the default User Access List (ACL) applied in the + Ingress direction for the IPv6 traffic for sessins when ACLs + are not dynamically assigned through RADIUS." + ::= { ruckusAuthConfig 19 } + +ruckusAuthDefaultV6EgressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the default User Access List (ACL) applied in the + Egress direction for the IPv6 traffic for sessins when ACLs + are not dynamically assigned through RADIUS." + ::= { ruckusAuthConfig 20 } + + +-- ------------------------------------------------------------ +-- FlexAuth Dot1X Configuration +-- This applies only to Dot1X authentication +-- ------------------------------------------------------------ +ruckusDot1xQuietPeriod OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When the Ruckus device is unable to authenticate the + Client, the amount of time the Ruckus device waits + before trying again." + DEFVAL { 60 } + ::= { ruckusDot1xAuthConfig 1 } + +ruckusDot1xTxPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When a Client does not send back an EAP(Extensible + Authentication Protocol)- response/identity frame, + the amount of time the Ruckus device waits before + retransmitting the EAP-request/identity frame to the + Client." + DEFVAL { 30 } + ::= { ruckusDot1xAuthConfig 2 } + +ruckusDot1xSuppTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When a supplicant (Client) does not respond to an + EAP-request frame, the amount of time before the + Ruckus device retransmits the frame." + DEFVAL { 30 } + ::= { ruckusDot1xAuthConfig 3 } + +ruckusDot1xMaxReq OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the Ruckus device retransmits an + EAP-request/identity request frame if it does not + receive an EAP-response/identity response frame from + the Client." + DEFVAL { 2 } + ::= { ruckusDot1xAuthConfig 4 } + +ruckusDot1xMaxReauthReq OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of re-authentication attempts that are + permitted before the port becomes Unauthorized." + DEFVAL { 2 } + ::= { ruckusDot1xAuthConfig 5 } + +ruckusDot1xGuestVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This VLAN is used to place the clients, when the + supplicant/client times out as it's not capable of + IEEE-802.1X authentication protocol. + + A value of zero for this object indicates no Guest + Vlan configured for the interface." + ::= { ruckusDot1xAuthConfig 6 } + +ruckusDot1xMacAuthOverride OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the MAC-Authentication should be tried + next when a client fails authentication with Dot1x + authentication method. + + This may be required when devices are Dot1x capable, + but authentication server is not configured with + user profiles, instead it's configured with device + profiles, so MAC-Authentication can succeed." + DEFVAL { disabled } + ::= { ruckusDot1xAuthConfig 7 } + +-- ------------------------------------------------------------ +-- FlexAuth MAC-Auth Configuration +-- This applies only to MAC authentication +-- ------------------------------------------------------------ +ruckusMacAuthPasswordFormat OBJECT-TYPE + SYNTAX INTEGER { + dashFormat(1), + colonFormat(2), + dotFormat(3), + normalFormat(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the format to be used for MAC address, + which is used as credential in MAC-authentication. + As MAC addresses are represented in different + formats, all such formats are supported as given in + options above. + + dashFormat(1): username/password gets formatted as + xx-xx-xx-xx-xx-xx + colonFormat(2): username/password gets formatted as + xx:xx:xx:xx:xxxx + dotFormat(3): username/password gets formatted as + xxxx.xxxx.xxxx + normalFormat(4):username/password gets formatted as + xxxxxxxxxxxx" + DEFVAL { normalFormat } + ::= { ruckusMacAuthConfig 1 } + +ruckusMacAuthPasswordOverride OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the password to be used for all MAC- + authentication clients. + + This is normally of 0 length string, which means the + client MAC address is used as the password." + ::= { ruckusMacAuthConfig 2 } + +ruckusMacAuthDot1xOverride OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the Dot1x should be tried next when a client + fails authentication with MAC-Authentication method. + + This may be required when devices are Dot1x capable, + authentication order is MAC-Auth followed by Dot1x, + and authentication server is not configured with + device profiles, instead it's configured with user + profiles, so Dot1x can succeed." + DEFVAL { disabled } + ::= { ruckusMacAuthConfig 3 } + +ruckusMacAuthDot1xEnable OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if the Dot1x should be tried next when a client + succeeds authentication with MAC-Authentication method. + + This may be required when devices are not Dot1x capable, + authentication order is MAC-Auth followed by Dot1x, + and authentication server is not configured with + user profiles, instead it's configured with device + profiles, so MAC-Auth can succeed." + DEFVAL { enabled } + ::= { ruckusMacAuthConfig 4 } + +-- ------------------------------------------------------------ +-- FlexAuth Web-Auth Configuration +-- This applies only to Web Authentication +-- ------------------------------------------------------------ +ruckusWebAuthTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth for a + specified VLAN. WebAuth is configured at the VLAN + level unlike MAC-Auth and Dot1x at the port level. + + An entry exists in this table for each configured + VLAN with WebAuth." + ::= { ruckusWebAuthConfig 1 } + +ruckusWebAuthEntry OBJECT-TYPE + SYNTAX RuckusWebAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of WebAuth configuration." + INDEX { ruckusWebAuthVlan } + ::= { ruckusWebAuthTable 1 } + +RuckusWebAuthEntry ::= SEQUENCE { + ruckusWebAuthVlan VlanId, + ruckusWebAuthEnable EnabledStatus, + ruckusWebAuthMode INTEGER, + ruckusWebAuthMethod INTEGER, + ruckusWebAuthMaxHosts Unsigned32, + ruckusWebAuthMaxAuthAttempts Unsigned32, + ruckusWebAuthReauthTime Unsigned32, + ruckusWebAuthCycleTime Unsigned32, + ruckusWebAuthBlockTime Unsigned32, + ruckusWebAuthMacAgeTime Unsigned32, + ruckusWebAuthPasscode DisplayString, + ruckusWebAuthLocalUserDb DisplayString, + ruckusWebAuthSecureLogin EnabledStatus, + ruckusWebAuthAccounting EnabledStatus, + ruckusWebAuthCaptiveProfile DisplayString, + ruckusWebAuthRedirectName DisplayString, + ruckusWebAuthWebpageRemoveUserId EnabledStatus, + ruckusWebAuthWebpageUsernameLabel DisplayString, + ruckusWebAuthWebpagePasswordLabel DisplayString, + ruckusWebAuthUpLinkPort InterfaceIndexOrZero, + ruckusWebAuthWebpageTop DisplayString, + ruckusWebAuthWebpageBottom DisplayString, + ruckusWebAuthWebpageTitle DisplayString, + ruckusWebAuthWebpageLoginButton DisplayString +} + +ruckusWebAuthVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the VLAN, this configuration entry applies to." + ::= { ruckusWebAuthEntry 1 } + +ruckusWebAuthEnable OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if Web-Auth is enabled or disabled." + DEFVAL { disabled } + ::= { ruckusWebAuthEntry 2 } + +ruckusWebAuthMode OBJECT-TYPE + SYNTAX INTEGER { + none(1), + passcode(2), + password(3), + captivePortal(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the authentication mode used for authenticating + the users. + + none - no authentication is performed + passcode - passcode based authentication, where the + passcode can be statitically configured or + generated dynamically + password - username and password based authentication, + where local user database or external RADIUS + server is used + captivePortal- external Captive Portal is used through + redirection" + ::= { ruckusWebAuthEntry 3 } + +ruckusWebAuthMethod OBJECT-TYPE + SYNTAX INTEGER { + radius(1), + local(2), + radiusLocal(3), + localRadius(4), + none(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When the AuthMode is configured as password, this specifies + the order for performing authentication. + + radius - RADIUS server for authentication + local - Local user DB for authentication + radiusLocal - RADIUS followed by Local User DB + localRadius - Local User DB followed by RADIUS + none - none of these methods." + DEFVAL { radius } + ::= { ruckusWebAuthEntry 4 } + +ruckusWebAuthMaxHosts OBJECT-TYPE + SYNTAX Unsigned32 (0..8192) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum number of hosts allowed to be + authenticated. Value 0 means no limit." + DEFVAL { 0 } + ::= { ruckusWebAuthEntry 5 } + +ruckusWebAuthMaxAuthAttempts OBJECT-TYPE + SYNTAX Unsigned32 (0..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum number of attempts allowed during the + auth cycle, after which the user is blocked for configured + amount of time, before next authentication. The value of 0 + means no limit." + DEFVAL { 5 } + ::= { ruckusWebAuthEntry 6 } + +ruckusWebAuthReauthTime OBJECT-TYPE + SYNTAX Unsigned32 (0..128000) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the re-authentication time, so the authenticated + users can be periodically reauthenticated after the timeout + specified through this object. Value 0 means no limit" + DEFVAL { 28800 } + ::= { ruckusWebAuthEntry 7 } + +ruckusWebAuthCycleTime OBJECT-TYPE + SYNTAX Unsigned32 (0..3600) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time of the authentication since the first + attempted user authentication, after which the user is not + allowed to authenticate and must reload the login-page to + start authentication. Value of 0 means no limit." + DEFVAL { 600 } + ::= { ruckusWebAuthEntry 8 } + +ruckusWebAuthBlockTime OBJECT-TYPE + SYNTAX Unsigned32 (0..12800) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time for blocking the user when successive + attempts have failed resulting in blocking the user. Value of + 0 means, the user is blocked permanently." + DEFVAL { 90 } + ::= { ruckusWebAuthEntry 9 } + +ruckusWebAuthMacAgeTime OBJECT-TYPE + SYNTAX Unsigned32 (0..3600) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the the time which together with mac-age-time of the + switch is considered an inactive time of the authenticated + host, after which the device is forced to reauthenticate. + + The value can be 0 meaning no aging, the maximum can be upto + the specified reauth-time." + DEFVAL { 3600 } + ::= { ruckusWebAuthEntry 10 } + +ruckusWebAuthPasscode OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the statically configured passcode used to + authenticate when passcode is used auth-method. The passcode + is digits only. + + This can consist of upto 4 passcodes where each entry is seperated + by space or tab." + ::= { ruckusWebAuthEntry 11 } + +ruckusWebAuthLocalUserDb OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the locally configured User Database for use + in authentication, when the auth-methos is password." + ::= { ruckusWebAuthEntry 12 } + +ruckusWebAuthSecureLogin OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if HTTPS is used for authentication or not." + DEFVAL { enabled } + ::= { ruckusWebAuthEntry 13 } + +ruckusWebAuthAccounting OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies if accounting is enbled or disabled." + DEFVAL { disabled } + ::= { ruckusWebAuthEntry 14 } + +ruckusWebAuthCaptiveProfile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the name of the configured Captive Portal profile, + which should be used for redirection, if the auth-method is + configured as captivePortal." + ::= { ruckusWebAuthEntry 15 } + +ruckusWebAuthRedirectName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the name to be used for URL when internal authentication + is used dusring authentication for prompting username/password + from the users, otherwise switch IP address is used. This must be + valid domain name for the switch." + ::= { ruckusWebAuthEntry 16 } + + +ruckusWebAuthWebpageRemoveUserId OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies if user-id field in custom webauth login page is disabled or not, + default value is disable, i.e., user-id field is displayed" + DEFVAL { disabled } + ::= { ruckusWebAuthEntry 17 } + +ruckusWebAuthWebpageUsernameLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for user-id label in webauth login page" + ::= { ruckusWebAuthEntry 18 } + +ruckusWebAuthWebpagePasswordLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for password label in webauth login page" + ::= { ruckusWebAuthEntry 19 } + +ruckusWebAuthUpLinkPort OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the port to be used as uplink port in network segmentation deployment" + ::= { ruckusWebAuthEntry 20 } + +ruckusWebAuthWebpageTop OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for Top of webauth login page" + ::= { ruckusWebAuthEntry 21 } + +ruckusWebAuthWebpageBottom OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for Bottom of webauth login page" + ::= { ruckusWebAuthEntry 22 } + +ruckusWebAuthWebpageTitle OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for Title in webauth login page" + ::= { ruckusWebAuthEntry 23 } + +ruckusWebAuthWebpageLoginButton OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the name to be used for Login-button in webauth login page" + ::= { ruckusWebAuthEntry 24 } + + +-- ------------------------------------------------------------ +-- WebAuth TrustPort Configuration +-- This applies for Web authentication at VLAN level +-- ------------------------------------------------------------ +ruckusWebAuthTrustPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthTrustPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth Trust + ports which are skipped from authentication in the + given VLAN and are typically uplink ports. + + An entry exists in this table for every Trust Port + defined on this VLAN." + ::= { ruckusWebAuthConfig 2 } + +ruckusWebAuthTrustPortEntry OBJECT-TYPE + SYNTAX RuckusWebAuthTrustPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in WebAuth Trust Port table." + INDEX { ruckusWebAuthVlan, ruckusWebAuthTrustPort } + ::= { ruckusWebAuthTrustPortTable 1 } + +RuckusWebAuthTrustPortEntry ::= SEQUENCE { + ruckusWebAuthTrustPort InterfaceIndex +} + +ruckusWebAuthTrustPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the trusted port or the up-link port, which is + considered secure, so authentication is not performed + on that port. + + This port generally provides access to the corporate or + Internet or other network for resource access during + authentication." + ::= { ruckusWebAuthTrustPortEntry 1 } + + +-- ------------------------------------------------------------ +-- WebAuth DNS Filter Configuration +-- This applies for Web authentication at VLAN level +-- ------------------------------------------------------------ +ruckusWebAuthDnsFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthDnsFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth DNS + filters which are qualified DNS servers and should + be allowed access during authentication for DNS + queries by clients. + + An entry exists in this table for every DNS filter + defined on this VLAN." + ::= { ruckusWebAuthConfig 3 } + +ruckusWebAuthDnsFilterEntry OBJECT-TYPE + SYNTAX RuckusWebAuthDnsFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in WebAuth DNS-Filter table." + INDEX { ruckusWebAuthVlan, ruckusWebAuthDnsFilterId } + ::= { ruckusWebAuthDnsFilterTable 1 } + +RuckusWebAuthDnsFilterEntry ::= SEQUENCE { + ruckusWebAuthDnsFilterId INTEGER, + ruckusWebAuthDnsFilterType InetAddressType, + ruckusWebAuthDnsFilterAddr InetAddress, + ruckusWebAuthDnsFilterPrefix Unsigned32 +} + +ruckusWebAuthDnsFilterId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index into the DNS filter table." + ::= { ruckusWebAuthDnsFilterEntry 1 } + +ruckusWebAuthDnsFilterType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type of the this filter entry, a V4 or V6 address." + ::= { ruckusWebAuthDnsFilterEntry 2 } + +ruckusWebAuthDnsFilterAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DNS server address, which is a V4 or V6 address." + ::= { ruckusWebAuthDnsFilterEntry 3 } + +ruckusWebAuthDnsFilterPrefix OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The DNS server server prefix, which applies to V4/V6 addresses." + ::= { ruckusWebAuthDnsFilterEntry 4 } + + +-- ------------------------------------------------------------ +-- WebAuth Trusted Server or White List Configuration +-- This applies for Web authentication only +-- ------------------------------------------------------------ +ruckusWebAuthWhiteListTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthWhiteListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth Whitelist + entries which are qualified external servers that should + be allowed access during authentication for various needs + by clients. + + An entry exists in this table for every Whitelist server + defined on this VLAN." + ::= { ruckusWebAuthConfig 4 } + +ruckusWebAuthWhiteListEntry OBJECT-TYPE + SYNTAX RuckusWebAuthWhiteListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in WebAuth Whitelist table." + INDEX { ruckusWebAuthVlan, ruckusWebAuthWhiteListId } + ::= { ruckusWebAuthWhiteListTable 1 } + +RuckusWebAuthWhiteListEntry ::= SEQUENCE { + ruckusWebAuthWhiteListId INTEGER, + ruckusWebAuthWhiteListType InetAddressType, + ruckusWebAuthWhiteListAddr InetAddress, + ruckusWebAuthWhiteListPrefix Unsigned32 +} + +ruckusWebAuthWhiteListId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index into the White List Server table." + ::= { ruckusWebAuthWhiteListEntry 1 } + +ruckusWebAuthWhiteListType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type of the this whitelist entry, a V4 or V6 or DNS name." + ::= { ruckusWebAuthWhiteListEntry 2 } + +ruckusWebAuthWhiteListAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The whitelist server address, which is a V4 or V6 address or DNS name." + ::= { ruckusWebAuthWhiteListEntry 3 } + +ruckusWebAuthWhiteListPrefix OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The whitelist server prefix, which applies to V4/V6 addresses." + ::= { ruckusWebAuthWhiteListEntry 4 } + +-- ------------------------------------------------------------ +-- WebAuth Auth Filter Configuration +-- This applies for Web authentication at VLAN/port level +-- ------------------------------------------------------------ +ruckusWebAuthFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth auth- + filters which are applied to statically authenticate + the clients without the need for authentication. + + This comes in for help to permit/deny pre-defined + clients and save time in authentication. An entry + exists in this table for every auth-filter defined + on this VLAN." + ::= { ruckusWebAuthConfig 5 } + +ruckusWebAuthFilterEntry OBJECT-TYPE + SYNTAX RuckusWebAuthFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in WebAuth Auth-Filter table." + INDEX { ruckusWebAuthVlan, ruckusWebAuthFilterMac } + ::= { ruckusWebAuthFilterTable 1 } + +RuckusWebAuthFilterEntry ::= SEQUENCE { + ruckusWebAuthFilterMac MacAddress, + ruckusWebAuthFilterPort InterfaceIndexOrZero, + ruckusWebAuthFilterDuration Unsigned32, + ruckusWebAuthFilterAction INTEGER +} + +ruckusWebAuthFilterMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the MAC Address of the filter for matching + the authenticating clients through static authentication." + ::= { ruckusWebAuthFilterEntry 1 } + +ruckusWebAuthFilterPort OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the port in the VLAN, where this filter should + be applied. If the port not valid, the entry applies to + all ports in VLAN." + ::= { ruckusWebAuthFilterEntry 2 } + +ruckusWebAuthFilterDuration OBJECT-TYPE + SYNTAX Unsigned32 (0..12800) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time for blocking or allowing the user when + the filter results in authenticating the user (matches). + Value of 0 means, the user is blocked permanently or + allowed permanently." + ::= { ruckusWebAuthFilterEntry 3 } + +ruckusWebAuthFilterAction OBJECT-TYPE + SYNTAX INTEGER { + permit(1), + deny(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be performed when this filter + is applied on the authenticating client when matching + occurs. + + permit(1) - allow the client in specified VLAN + deny(2) - block the client" + ::= { ruckusWebAuthFilterEntry 4 } + +-- ------------------------------------------------------------ +-- WebAuth Captive Portal Configuration +-- This applies for Web authentication only +-- ------------------------------------------------------------ +ruckusWebAuthCaptivePortalTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWebAuthCaptivePortalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of WebAuth Captive + profiles for various external WebAuth servers. + + The rntry provides the server information such as + the DNS name or address, port and login page where + the authenticating client should be redirected to." + ::= { ruckusWebAuthConfig 6 } + +ruckusWebAuthCaptivePortalEntry OBJECT-TYPE + SYNTAX RuckusWebAuthCaptivePortalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in WebAuth Captive Poratl table." + INDEX { IMPLIED ruckusWebAuthCaptivePortalName } + ::= { ruckusWebAuthCaptivePortalTable 1 } + +RuckusWebAuthCaptivePortalEntry ::= SEQUENCE { + ruckusWebAuthCaptivePortalName DisplayString, + ruckusWebAuthCaptivePortalType InetAddressType, + ruckusWebAuthCaptivePortalAddr InetAddress, + ruckusWebAuthCaptivePortalPort Unsigned32, + ruckusWebAuthCaptivePortalLoginPage DisplayString +} + +ruckusWebAuthCaptivePortalName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Specifies the name of the profile entry." + ::= { ruckusWebAuthCaptivePortalEntry 1 } + +ruckusWebAuthCaptivePortalType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Captive server type - qualified name or IP address." + ::= { ruckusWebAuthCaptivePortalEntry 2 } + +ruckusWebAuthCaptivePortalAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Captive server qualified name or IP address." + ::= { ruckusWebAuthCaptivePortalEntry 3 } + +ruckusWebAuthCaptivePortalPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Captive server port for HTTP/HTTPS access." + DEFVAL { 443 } + ::= { ruckusWebAuthCaptivePortalEntry 4 } + +ruckusWebAuthCaptivePortalLoginPage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the login page of the Captive server, where the client + should be redirected to." + ::= { ruckusWebAuthCaptivePortalEntry 5 } + + + +-- ------------------------------------------------------------ +-- FlexAuth Port Configuration +-- This applies for Dot1x and MAC authentication at port level +-- ------------------------------------------------------------ +ruckusAuthPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAuthPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of FlexAuth, + including Dot1x and MAC-Auth for a specified port. + Most objects at the port level oerride the similar + configured objects at the global level. + + An entry exists in this table for each configured + with FlexAuth." + ::= { ruckusAuthPortConfig 1 } + +ruckusAuthPortEntry OBJECT-TYPE + SYNTAX RuckusAuthPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of FlexAuth port configuration." + INDEX { ifIndex } + ::= { ruckusAuthPortTable 1 } + +RuckusAuthPortEntry ::= SEQUENCE { + ruckusAuthPortEnable BITS, + ruckusAuthPortDot1xControl INTEGER, + ruckusAuthPortDefaultVlan VlanId, + ruckusAuthPortVoiceVlan VlanId, + ruckusAuthPortCriticalVlan VlanId, + ruckusAuthPortRestrictVlan VlanId, + ruckusAuthPortMode RuckusAuthMode, + ruckusAuthPortMethods RuckusAuthOrder, + ruckusAuthPortMaxSessions Unsigned32, + ruckusAuthPortFailAction RuckusAuthFailAction, + ruckusAuthPortTimeoutAction RuckusAuthTimeoutAction, + ruckusAuthPortReauthTimeout Unsigned32, + ruckusAuthPortAging RuckusAuthAging, + ruckusAuthPortAllowTagged EnabledStatus, + ruckusAuthPortSourceGuard EnabledStatus, + ruckusAuthPortDosAttacks EnabledStatus, + ruckusAuthPortDosAttackLimit Unsigned32 +} + +ruckusAuthPortEnable OBJECT-TYPE + SYNTAX BITS { + dot1x(0), + macAuth(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies authentication methods that are enabled on + this port. Unless the method is enabled globally, + the same can't be enabled at port level. A bit field + of '1' indicates enabled, otherwise disabled." + ::= {ruckusAuthPortEntry 1} + +ruckusAuthPortDot1xControl OBJECT-TYPE + SYNTAX INTEGER { + forceUnauthorized(1), + controlauto(2), + forceAuthorized(3), + other(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Dot1x operating mode for this port, + when Dot1x is enabled. + + force-unauthorized(1)- port's controlled port is + placed unconditionally in + the unauthorized state + control-auto(2) - the controlled port is + unauthorized until + authentication takes place + between client and server + force-authorized(3) - the port's controlled port is + placed unconditionally in the + authorized state + other(4) - not initialized" + DEFVAL { forceAuthorized } + ::= { ruckusAuthPortEntry 2 } + +ruckusAuthPortDefaultVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This default VLAN is used to place this port, so + this VLAN acts as a VLAN for the clients to belong + to, when authentication server doesn't assign any + VLANs. + + A value of zero for this object indicates no default + Vlan is configured for this port on this Ruckus + device, so the global default VLAN is used." + ::= { ruckusAuthPortEntry 3 } + +ruckusAuthPortVoiceVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This voice VLAN is used to advertise through + LLDP/CDP on this port, when connected devices are + detected as Phones and authentication server doesn't + assign any Voice VLAN. + + A value of zero for this object indicates no Voice + Vlan is configured for this port on this Ruckus + device, so the global Voice VLAN is used." + ::= { ruckusAuthPortEntry 4 } + +ruckusAuthPortCriticalVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This VLAN is used to place the clients of this port, + when the authentication server times out and the + port auth-timeout-action is configired as + 'critical', so the clients have limited access. + + Refer to ruckusAuthPortTimeoutAction object for + timeout-action choices. + + A value of zero for this object indicates no + Critical Vlan is configured for this port on this + Ruckus device, so the global Critical VLAN is used." + ::= { ruckusAuthPortEntry 5 } + +ruckusAuthPortRestrictVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This VLAN is used to place the clients of this port, + when the clients fail the authentication and the + auth-failure-action is configured as 'restrict', so + the clients have limited access. + + Refer to ruckusAuthPortFailAction object for + fail-action choices. + + A value of zero for this object indicates no + Restrict Vlan is configured for this port on this + Ruckus device, so the global Restrict VLAN is used." + ::= { ruckusAuthPortEntry 6 } + +ruckusAuthPortMode OBJECT-TYPE + SYNTAX RuckusAuthMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the authentication mode for this port. + This overrides the globally configured value." + DEFVAL { singleUntagged } + ::= { ruckusAuthPortEntry 7 } + +ruckusAuthPortMethods OBJECT-TYPE + SYNTAX RuckusAuthOrder + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies authentication methods to be attempted in + series of methods for this port. This overrides the + globally configured value." + DEFVAL { dot1xMauth } + ::= { ruckusAuthPortEntry 8 } + +ruckusAuthPortMaxSessions OBJECT-TYPE + SYNTAX Unsigned32 (1..1024) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum number of authenticated + clients allowed on this port. This doesn't include + the clients allowed due to authentication failure + and timeout policies." + DEFVAL { 2 } + ::= { ruckusAuthPortEntry 9 } + +ruckusAuthPortFailAction OBJECT-TYPE + SYNTAX RuckusAuthFailAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be taken on this port. This + overrides the globally set value." + DEFVAL { blockTraffic } + ::= { ruckusAuthPortEntry 10 } + +ruckusAuthPortTimeoutAction OBJECT-TYPE + SYNTAX RuckusAuthTimeoutAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be taken on this port, when + the authentication server times out for various + readons like server busy, network access, etc. This + overrides the globally set value." + DEFVAL { other } + ::= { ruckusAuthPortEntry 11 } + +ruckusAuthPortReauthTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "How often to re-authenticates clients of this port, + when the clients were allowed due to authentication + server timeout. Value of 0 disables the + re-authentication." + DEFVAL { 300 } + ::= { ruckusAuthPortEntry 12 } + +ruckusAuthPortAging OBJECT-TYPE + SYNTAX RuckusAuthAging + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies, if denied and permitted sessions are + enabled or disabled for aging on this port. This + overrided the global value." + ::= { ruckusAuthPortEntry 13 } + +ruckusAuthPortAllowTagged OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies, if denied and permitted sessions are + enabled or disabled for aging on this port. A bit + field of '1' indicates enabled, otherwise disabled." + DEFVAL { disabled } + ::= { ruckusAuthPortEntry 14 } + +ruckusAuthPortSourceGuard OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source guard enabling ensures that the client IP + address to be learned and allow the packets matching + that IP address only. This is implied when user ACLs + are applied on the port, so has impact only + otherwise." + DEFVAL { disabled } + ::= { ruckusAuthPortEntry 15 } + +ruckusAuthPortDosAttacks OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies to prevent/allow Denial of Service attacks + on this port. Constantly sending packets from + different clients (MAC addresses) causes DOS, as the + clients are not allowed without authentication, + which may cause exhausing of system resources." + DEFVAL { disabled } + ::= { ruckusAuthPortEntry 16 } + +ruckusAuthPortDosAttackLimit OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of clients to be allowed at any + time without authentication, and if authentication + pending clients exceed the configured limit (as + specified by this object), the port gets shutdown to + prevent DOS attacks." + DEFVAL { 512 } + ::= { ruckusAuthPortEntry 17 } + +-- ------------------------------------------------------------ +-- FlexAuth Port Auth Filter Configuration +-- This applies for Dot1x and MAC authentication at port level +-- ------------------------------------------------------------ +ruckusAuthFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAuthFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that allows configuration of FlexAuth auth- + filters which are applied to statically authenticate + the clients without the need for RADIUS server + authenticator. + + This comes in for help to permit/deny pre-defined + clients and save time in authentication. An entry + exists in this table for every auth-filter bound + on the port." + ::= { ruckusAuthFilterConfig 1 } + +ruckusAuthFilterEntry OBJECT-TYPE + SYNTAX RuckusAuthFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of FlexAuth port Auth-Filter configuration." + INDEX { ifIndex, ruckusAuthFilterId } + ::= { ruckusAuthFilterTable 1 } + +RuckusAuthFilterEntry ::= SEQUENCE { + ruckusAuthFilterId INTEGER, + ruckusAuthFilterMac MacAddress, + ruckusAuthFilterMask MacAddress, + ruckusAuthFilterVlan VlanId, + ruckusAuthFilterAction INTEGER +} + +ruckusAuthFilterId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index into the authe filter table." + ::= { ruckusAuthFilterEntry 1 } + +ruckusAuthFilterMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the MAC Address of the filter for matching + the authenticating clients through static authentication." + ::= { ruckusAuthFilterEntry 2 } + +ruckusAuthFilterMask OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Mask of the filter for matching the + incoming clients through static authentication. The mask + is applied on MAC in the filter and client MAC before the + matching decision is made." + ::= { ruckusAuthFilterEntry 3 } + +ruckusAuthFilterVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLAN which should be used to place the + authenticating client after the matching is done. This + VLAN applies only when the action is permit. Denied + clients are always blocked." + ::= { ruckusAuthFilterEntry 4 } + +ruckusAuthFilterAction OBJECT-TYPE + SYNTAX INTEGER { + permit(1), + deny(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the action to be performed when this filter + is applied on the authenticating client and matching + occurs. + + permit(1) - allow the client in specified VLAN + deny(2) - block the client" + ::= { ruckusAuthFilterEntry 5 } + +-- ------------------------------------------------------------ +-- FlexAuth Sessions +-- This applies for Dot1x and MAC-Auth sessions at port level +-- ------------------------------------------------------------ +ruckusAuthSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAuthSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table providing information about the FlexAuth + sessions for each client at port level in the + Ruckus device. + + This table contains entries for all the clients + authenticated or failed on a given port. + + Entries get created when clients are authenticated + amd cleared when they logoff or timeout." + ::= { ruckusAuthSessions 1 } + +ruckusAuthSessionEntry OBJECT-TYPE + SYNTAX RuckusAuthSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about the FlexAuth + session of a specified client on a port" + INDEX { ifIndex, ruckusAuthSessionMac } + ::= { ruckusAuthSessionTable 1 } + +RuckusAuthSessionEntry ::= SEQUENCE { + ruckusAuthSessionMac MacAddress, + ruckusAuthSessionVlan VlanId, + ruckusAuthSessionVlanType INTEGER, + ruckusAuthSessionTaggedVlan VlanId, + ruckusAuthSessionUserName DisplayString, + ruckusAuthSessionDeviceType INTEGER, + ruckusAuthSessionMethod INTEGER, + ruckusAuthSessionMode RuckusAuthMode, + ruckusAuthSessionStatus INTEGER, + ruckusAuthSessionDot1xStatus Dot1xAuthState, + ruckusAuthSessionAgingType INTEGER, + ruckusAuthSessionAge Unsigned32, + ruckusAuthSessionTimeout Unsigned32, + ruckusAuthSessionIdleTimeout Unsigned32, + ruckusAuthSessionTime Unsigned32, + ruckusAuthSessionV4IngressAcl DisplayString, + ruckusAuthSessionV4EgressAcl DisplayString, + ruckusAuthSessionV6IngressAcl DisplayString, + ruckusAuthSessionV6EgressAcl DisplayString, + ruckusAuthSessionTxOctets Counter64, + ruckusAuthSessionRxOctets Counter64, + ruckusAuthSessionTxPkts Counter64, + ruckusAuthSessionRxPkts Counter64, + ruckusAuthSessionFailureReason DisplayString, + ruckusAuthSessionFlags BITS +} + +ruckusAuthSessionMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the MAC Address of the client + (device/host) represented by this session entry" + ::= { ruckusAuthSessionEntry 1 } + +ruckusAuthSessionVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLAN, the client (device/host) belongs + to, represented by this session entry. + + In case of voice-phones, this VLAN is the voice-VLAN + (tagged) and in all other cases, most likely an + untagged VLAN, unless it's a tagged VM client" + ::= { ruckusAuthSessionEntry 2 } + +ruckusAuthSessionVlanType OBJECT-TYPE + SYNTAX INTEGER { + default(1), + retrict(2), + critical(3), + guest(4), + radius(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Decribes the type of the VLAN associated with the session. + + default(1) - Default VLANs as configured on Ruckus device + restrict(2) - Restricted VLAN as authentication failed + critical(3) - Critical VLAN as authentication timed out + guest(4) - Guest VLAN as client is not Dot1x capable + radius(5) - RADIUS (auth) server assigned VLAN" + ::= { ruckusAuthSessionEntry 3 } + +ruckusAuthSessionTaggedVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tagged VLAN or Voice VLAN sent by the RADIUS server, so + the port gets added to the VLAN, to prepare the device + to send tagged packets in case of phones." + ::= { ruckusAuthSessionEntry 4 } + +ruckusAuthSessionUserName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the User name associated with the client, + represented by this session. + + In case of Dot1x sessions, it's the username used by + the user to log into the network; whereas in case of + MAC-Auth, it could be MAC address or user name + assigned by RADIUS server in ACCESS-ACCEPT packet + during authentication." + ::= { ruckusAuthSessionEntry 5 } + +ruckusAuthSessionDeviceType OBJECT-TYPE + SYNTAX INTEGER { + phone(1), + wlanAP(2), + router(3), + bridge(4), + other(8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Decribes the type of the client connnected and + authenticated on this port." + ::= { ruckusAuthSessionEntry 6 } + +ruckusAuthSessionMethod OBJECT-TYPE + SYNTAX INTEGER { + dot1x(1), + macAuth(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the authentication method that is used for + authenticating the client on this port represented + by this session. + + It's possible that both authentication methods are + tried, both either succeeded or failed and the + resulting status is generally decided by the last + method." + ::= { ruckusAuthSessionEntry 7 } + +ruckusAuthSessionMode OBJECT-TYPE + SYNTAX RuckusAuthMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the authentication mode applied for this + client on this port." + ::= { ruckusAuthSessionEntry 8 } + +ruckusAuthSessionStatus OBJECT-TYPE + SYNTAX INTEGER { + allowed(1), + blocked(2), + restrict(3), + critical(4), + guest(5), + other(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The authentication state of the session which can + take the following values. + + allowed - client authentication is successful, so + the complete access is granted + blocked - client failed authentication, so access + is denied + restrict - client failed authentication, but + allowed restricted access + critical - client authentication timedout, so + access is limited to critical operations + guest - client is not Dot1x capable, so allowed + guest role access" + ::= { ruckusAuthSessionEntry 9 } + +ruckusAuthSessionDot1xStatus OBJECT-TYPE + SYNTAX Dot1xAuthState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the state of Dot1x authentication, if the + client is using Dot1x for authentication." + ::= { ruckusAuthSessionEntry 10 } + +ruckusAuthSessionAgingType OBJECT-TYPE + SYNTAX INTEGER { + software(1), + hardware(2), + enabled(3), + disabled(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the aging status of the client session + which can be of the following values. + + software(1): + Client MAC entry is cleared as the entry + timedout in hardware for configured inactivity + period, so it has entered software aging state + hardware(2): + Client MAC has detected the inactivity on the + port, so entered the hardware aging state + enabled(3): + Aging is enabled and there is no detection of + inactivity on the port for this client, so aging + has not started + disabled(4): + Aging is disabled for this client, so any amount + of inactivity period doesn't clear the session + " + ::= { ruckusAuthSessionEntry 11 } + +ruckusAuthSessionAge OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When the aging type is either software or hardware, + this object indicates the time, the session had been + in that state. When the configured maximum time is + reached, the aging state moves from hardware to + software or session is cleared." + ::= { ruckusAuthSessionEntry 12 } + +ruckusAuthSessionTimeout OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum amount of time, the session + should exit before re-authenticating or terminating + the sessions depending on another RADIUS attribute + 'Termination-Action'." + ::= { ruckusAuthSessionEntry 13 } + +ruckusAuthSessionIdleTimeout OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the maximum amount of time after which the + session is cleared when there is no traffic from the + client. A value of 0 means, the sessions never gets + terminated due to inactivity." + ::= { ruckusAuthSessionEntry 14 } + +ruckusAuthSessionTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indcates the session UP time since the session had + been up or created." + ::= { ruckusAuthSessionEntry 15 } + +ruckusAuthSessionV4IngressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the User Access List (ACL) applied in the + Ingress direction for the IPv4 traffic for this + client on this port." + ::= { ruckusAuthSessionEntry 16 } + +ruckusAuthSessionV4EgressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the User Access List (ACL) applied in the + Egress direction for the IPv4 traffic for this + client on this port." + ::= { ruckusAuthSessionEntry 17 } + +ruckusAuthSessionV6IngressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the User Access List (ACL) applied in the + Ingress direction for the IPv6 traffic for this + client on this port." + ::= { ruckusAuthSessionEntry 18 } + +ruckusAuthSessionV6EgressAcl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the User Access List (ACL) applied in the + Egress direction for the IPv6 traffic for this + client on this port." + ::= { ruckusAuthSessionEntry 19 } + +ruckusAuthSessionTxOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number bytes sent for this session on the port." + ::= { ruckusAuthSessionEntry 20 } + +ruckusAuthSessionRxOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number bytes received for this session on the port." + ::= { ruckusAuthSessionEntry 21 } + +ruckusAuthSessionTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number bytes sent for this session on the port." + ::= { ruckusAuthSessionEntry 22 } + +ruckusAuthSessionRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the number bytes received for this session on the port." + ::= { ruckusAuthSessionEntry 23 } + +ruckusAuthSessionFailureReason OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the internal failure reason for this + client, such as memory allocation, RADIUS attribute + parsing, RADIUS REJECT, etc." + ::= { ruckusAuthSessionEntry 24 } + +ruckusAuthSessionFlags OBJECT-TYPE + SYNTAX BITS { + staticAuthenticated(0), + taggedSession(1), + dot1xNonCapable(2), + dot1xEnabled(3), + masterMacAuth(4), + v4AclApplied(5), + v6AclApplied(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Desacribes various other parameters of client + session, by clubbing them together in one object for + simplicity. + + staticAuthenticated(0): + Client is authenticaticated using configured + auth-fileters on the port, instead of normal + RADIUS server + taggedSession(1): + Client VLAN is tagged, which may indicate the + client as Phone or tagged VM + dot1xNonCapable(2): + Client is not Dot1x capabale + dot1xEnabled(3): + Dot1x should be tried or not, when MAC-Auth + succeeds depending on default value (enable), + configured value or RADIUS attribute + masterMacAuth(4), + Indicates if this session is Master session in + case of MAC-Auth session, as there would be + multiple sessions for MAC-Auth, whereas there + would be only one session visible + v4AclApplied(5): + IPv4 ACL is applied for the client + v6AclApplied(6): + IPv6 ACL is applied for the client + " + ::= { ruckusAuthSessionEntry 25 } + +-- ------------------------------------------------------------ +-- FlexAuth Session Address Table +-- This applies for Dot1x and MAC-Auth sessions at port level +-- ------------------------------------------------------------ +ruckusAuthSessionAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAuthSessionAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An address table providing V4/V6 information about + the FlexAuth sessions for each client at port level + in the Ruckus device." + ::= { ruckusAuthSessions 2 } + +ruckusAuthSessionAddrEntry OBJECT-TYPE + SYNTAX RuckusAuthSessionAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about the FlexAuth + session address of a specified client on a port" + INDEX { ifIndex, ruckusAuthSessionMac, ruckusAuthSessionAddrId } + ::= { ruckusAuthSessionAddrTable 1 } + +RuckusAuthSessionAddrEntry ::= SEQUENCE { + ruckusAuthSessionAddrId INTEGER, + ruckusAuthSessionAddrType InetAddressType, + ruckusAuthSessionAddr InetAddress +} + +ruckusAuthSessionAddrId OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index into the White List Server table." + ::= { ruckusAuthSessionAddrEntry 1 } + +ruckusAuthSessionAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type of the this address entry, a V4 or V6." + ::= { ruckusAuthSessionAddrEntry 2 } + +ruckusAuthSessionAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of this session entry, which is a V4 or V6 address." + ::= { ruckusAuthSessionAddrEntry 3 } + + +-- ------------------------------------------------------------ +-- FlexAuth Session Statistics +-- This applies for Dot1x and MAC sessions at port level +-- ------------------------------------------------------------ +ruckusAuthStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that provides information about the summary + of MAC-Auth and Dot1x sessions at port level. + + An entry exists in this table for every port enabled + for FlexAuth." + ::= { ruckusAuthStatistics 1 } + +ruckusAuthStatsEntry OBJECT-TYPE + SYNTAX RuckusAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of port level FlexAuth session summary + table." + INDEX { ifIndex } + ::= { ruckusAuthStatsTable 1 } + +RuckusAuthStatsEntry::= SEQUENCE { + ruckusDot1xSessionsAttempted Counter32, + ruckusDot1xSessionsAccepted Counter32, + ruckusDot1xSessionsRejected Counter32, + ruckusDot1xSessionsInProgress Counter32, + ruckusDot1xSessionsErrored Counter32, + ruckusMacAuthSessionsAttempted Counter32, + ruckusMacAuthSessionsAccepted Counter32, + ruckusMacAuthSessionsRejected Counter32, + ruckusMacAuthSessionsInProgress Counter32, + ruckusMacAuthSessionsErrored Counter32 + } + +ruckusDot1xSessionsAttempted OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Dot1x sessions attempted on this port, + since the time the stats were cleared." + ::= { ruckusAuthStatsEntry 1 } + +ruckusDot1xSessionsAccepted OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Dot1x sessions accepted or permited on + this port, since the time the stats were cleared." + ::= { ruckusAuthStatsEntry 2 } + +ruckusDot1xSessionsRejected OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Dot1x sessions failed or rejected on + this port, since the time the stats were cleared." + ::= { ruckusAuthStatsEntry 3 } + +ruckusDot1xSessionsInProgress OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Dot1x sessions which are in progress + on this port waiting for authentication to be + completed, since the time the stats were cleared." + ::= { ruckusAuthStatsEntry 4 } + +ruckusDot1xSessionsErrored OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Dot1x sessions which are neither + accepted or rejected due to conditions like timeout, + resource failure, etc; on this port, since the time + the stats were cleared." + ::= { ruckusAuthStatsEntry 5 } + +ruckusMacAuthSessionsAttempted OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC-Auth sessions attempted on this + port, since the time the stats were cleared." + ::= { ruckusAuthStatsEntry 6 } + +ruckusMacAuthSessionsAccepted OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC-Auth sessions accepted or permited + on this port, since the time the stats were cleared" + ::= { ruckusAuthStatsEntry 7 } + +ruckusMacAuthSessionsRejected OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC-Auth sessions failed or rejected + on this port, since the time the stats were cleared" + ::= { ruckusAuthStatsEntry 8 } + +ruckusMacAuthSessionsInProgress OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC-Auth sessions which are in + progress on this port waiting for authentication to + be completed, since the time the stats were cleared" + ::= { ruckusAuthStatsEntry 9 } + +ruckusMacAuthSessionsErrored OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of MAC-Auth sessions which are neither + accepted or rejected due to conditions like timeout, + resource failure, etc; on this port, since the time + the stats were cleared." + ::= { ruckusAuthStatsEntry 10 } + + +-- ------------------------------------------------------------ +-- Dot1x Port Statistics +-- This applies for Dot1x authentication only at port level +-- ------------------------------------------------------------ +ruckusDot1xAuthStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusDot1xAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that provides information about the Dot1x + Statistics at port level. + + An entry exists in this table for every port enabled + for Dot1x." + ::= { ruckusAuthStatistics 2 } + +ruckusDot1xAuthStatsEntry OBJECT-TYPE + SYNTAX RuckusDot1xAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry of per port Dot1x statistics table." + INDEX { ifIndex } + ::= { ruckusDot1xAuthStatsTable 1 } + +RuckusDot1xAuthStatsEntry::= SEQUENCE { + ruckusDot1xTxEAPFrames Counter32, + ruckusDot1xTxEAPReqIdFrames Counter32, + ruckusDot1xTxEAPReqFrames Counter32, + ruckusDot1xRxEAPFrames Counter32, + ruckusDot1xRxEAPStartFrames Counter32, + ruckusDot1xRxEAPLogOffFrames Counter32, + ruckusDot1xRxEAPRespIdFrames Counter32, + ruckusDot1xRxEAPRespFrames Counter32, + ruckusDot1xRxEAPInvalidFrames Counter32, + ruckusDot1xRxLengthErrorFrames Integer32, + ruckusDot1xRxEAPLastFrameVersion Unsigned32, + ruckusDot1xRxEAPLastFrameSource MacAddress +} + +ruckusDot1xTxEAPFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of EAPOL frames transmitted on this + port" + ::= { ruckusDot1xAuthStatsEntry 1 } + +ruckusDot1xTxEAPReqIdFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EAP-Request/Identity frames + transmitted on this port" + ::= { ruckusDot1xAuthStatsEntry 2 } + +ruckusDot1xTxEAPReqFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of transmitted EAP request frames that + are not EAP-Request/identify on this port" + ::= { ruckusDot1xAuthStatsEntry 3 } + +ruckusDot1xRxEAPFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of EAPOL frames received on this + port" + ::= { ruckusDot1xAuthStatsEntry 4 } + +ruckusDot1xRxEAPStartFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EAPOL-Start frames received on this + port" + ::= { ruckusDot1xAuthStatsEntry 5 } + +ruckusDot1xRxEAPLogOffFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EAPOL-Logoff frames received on this + port" + ::= { ruckusDot1xAuthStatsEntry 6 } + +ruckusDot1xRxEAPRespIdFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EAP-Response/Identify frames received + on this port" + ::= { ruckusDot1xAuthStatsEntry 7 } + +ruckusDot1xRxEAPRespFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received EAP-Response frames other + than EAP-Response/Identity on this port" + ::= { ruckusDot1xAuthStatsEntry 8 } + +ruckusDot1xRxEAPInvalidFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of invalid EAPOL frames received on this + port" + ::= { ruckusDot1xAuthStatsEntry 9 } + +ruckusDot1xRxLengthErrorFrames OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of EAPOL frames received with incorrect + length on this port" + ::= { ruckusDot1xAuthStatsEntry 10 } + +ruckusDot1xRxEAPLastFrameVersion OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of last EAP frame received on this port" + ::= { ruckusDot1xAuthStatsEntry 11 } + +ruckusDot1xRxEAPLastFrameSource OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address of the source from where the last + EAP frame received on this port" + ::= { ruckusDot1xAuthStatsEntry 12 } + + +-- ------------------------------------------------------------ +-- FlexAuth MIB Notifications (applies for Dot1x and MAC-Auth) +-- ------------------------------------------------------------ +ruckusAuthPortAuthorizedNotif NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusAuthSessionMac, + ruckusAuthSessionVlan, + ruckusAuthSessionVlanType + } + STATUS current + DESCRIPTION "This notification is sent if a 802.1x supplicant + is detected and authenticated successfully with + supplicant getting assigned a VLAN." + ::= { ruckusAuthNotification 1 } + +ruckusAuthPortUnauthorizedNotif NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusAuthSessionMac + } + STATUS current + DESCRIPTION "This notification is sent if a 802.1x supplicant + had logged off or session is cleared for other reasons." + ::= { ruckusAuthNotification 2 } + +ruckusAuthMacAuthorizedNotif NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusAuthSessionMac, + ruckusAuthSessionVlan, + ruckusAuthSessionVlanType + } + STATUS current + DESCRIPTION "This notification is sent if a non-802.1x client is + detected and authenticated successfully with + client/device getting assigned a VLAN." + ::= { ruckusAuthNotification 3 } + +ruckusAuthMacUnauthorizedNotif NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusAuthSessionMac + } + STATUS current + DESCRIPTION "This notification is sent if a non-802.1x client + had logged off or session is cleared for other reasons." + ::= { ruckusAuthNotification 4 } + +ruckusAuthAclFailNotif NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusAuthSessionMac, + ruckusAuthSessionMethod + } + STATUS current + DESCRIPTION "This notification is sent if a an ACL counldn't be + applied for authenticated client, resulting the client + in authentication failure." + ::= { ruckusAuthNotification 5 } + + +-- ------------------------------------------------------------ +-- FlexAuth MIB Conformance (applies for Dot1x and MAC-Auth) +-- ------------------------------------------------------------ +ruckusAuthMIBCompliances OBJECT IDENTIFIER ::= { ruckusAuthConformance 1 } +ruckusAuthMIBGroups OBJECT IDENTIFIER ::= { ruckusAuthConformance 2 } + +ruckusAuthCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entities which + implement RUCKUS-AUTH-MIB." + MODULE -- this module + MANDATORY-GROUPS { + ruckusAuthConfigGroup, + ruckusDot1xAuthConfigGroup, + ruckusMacAuthConfigGroup, + ruckusWebAuthConfigGroup, + ruckusAuthPortConfigGroup, + ruckusAuthFilterConfigGroup, + ruckusAuthSessionsGroup + } + ::= { ruckusAuthMIBCompliances 1 } + +------------------------ +-- Units of Conformance +------------------------ +ruckusAuthConfigGroup OBJECT-GROUP + OBJECTS { + ruckusAuthDefaultVlan, + ruckusAuthVoiceVlan, + ruckusAuthCriticalVlan, + ruckusAuthRestrictVlan, + ruckusAuthMode, + ruckusAuthMethods, + ruckusAuthMaxSessions, + ruckusAuthFailAction, + ruckusAuthTimeoutAction, + ruckusAuthReauthEnable, + ruckusAuthReauthPeriod, + ruckusAuthReauthTimeout, + ruckusAuthIdleTimeout, + ruckusAuthDeniedTimeout, + ruckusAuthAging, + ruckusAuthEnable, + ruckusAuthDefaultV4IngressAcl, + ruckusAuthDefaultV4EgressAcl, + ruckusAuthDefaultV6IngressAcl, + ruckusAuthDefaultV6EgressAcl + } + STATUS current + DESCRIPTION "A collection of objects that provide global + configuration of FlexAuth feature, common to both + MAC-Auth and Dot1x." + ::= { ruckusAuthMIBGroups 1 } + +ruckusDot1xAuthConfigGroup OBJECT-GROUP + OBJECTS { + ruckusDot1xQuietPeriod, + ruckusDot1xTxPeriod, + ruckusDot1xSuppTimeout, + ruckusDot1xMaxReq, + ruckusDot1xMaxReauthReq, + ruckusDot1xGuestVlan, + ruckusDot1xMacAuthOverride + } + STATUS current + DESCRIPTION "A collection of objects that provide global + global configuration of Dot1x sub-feature, + which applies only to Dot1x." + ::= { ruckusAuthMIBGroups 2 } + +ruckusMacAuthConfigGroup OBJECT-GROUP + OBJECTS { + ruckusMacAuthPasswordFormat, + ruckusMacAuthPasswordOverride, + ruckusMacAuthDot1xOverride, + ruckusMacAuthDot1xEnable + } + STATUS current + DESCRIPTION "A collection of objects that provide global + configuration of MAC-Auth sub-feature, which + applies only to MAC-Auth." + ::= { ruckusAuthMIBGroups 3 } + +ruckusAuthPortConfigGroup OBJECT-GROUP + OBJECTS { + ruckusAuthPortEnable, + ruckusAuthPortDot1xControl, + ruckusAuthPortDefaultVlan, + ruckusAuthPortVoiceVlan, + ruckusAuthPortCriticalVlan, + ruckusAuthPortRestrictVlan, + ruckusAuthPortMode, + ruckusAuthPortMethods, + ruckusAuthPortMaxSessions, + ruckusAuthPortFailAction, + ruckusAuthPortTimeoutAction, + ruckusAuthPortReauthTimeout, + ruckusAuthPortAging, + ruckusAuthPortAllowTagged, + ruckusAuthPortSourceGuard, + ruckusAuthPortDosAttacks, + ruckusAuthPortDosAttackLimit + } + STATUS current + DESCRIPTION "A collection of objects that provide interface + configuration of FlexAuth feature,common to both + MAC-Auth and Dot1x." + ::= { ruckusAuthMIBGroups 4 } + +ruckusAuthFilterConfigGroup OBJECT-GROUP + OBJECTS { + ruckusAuthFilterMac, + ruckusAuthFilterMask, + ruckusAuthFilterVlan + } + STATUS current + DESCRIPTION "A collection of objects that provide interface + auth filter configuration of FlexAuth feature, + common to both MAC-Auth and Dot1x." + ::= { ruckusAuthMIBGroups 5 } + +ruckusAuthSessionsGroup OBJECT-GROUP + OBJECTS { + ruckusAuthSessionVlan, + ruckusAuthSessionTaggedVlan, + ruckusAuthSessionUserName, + ruckusAuthSessionDeviceType, + ruckusAuthSessionStatus, + ruckusAuthSessionDot1xStatus, + ruckusAuthSessionMethod, + ruckusAuthSessionMode, + ruckusAuthSessionAgingType, + ruckusAuthSessionAge, + ruckusAuthSessionTimeout, + ruckusAuthSessionIdleTimeout, + ruckusAuthSessionTime, + ruckusAuthSessionV4IngressAcl, + ruckusAuthSessionV4EgressAcl, + ruckusAuthSessionV6IngressAcl, + ruckusAuthSessionV6EgressAcl, + ruckusAuthSessionTxOctets, + ruckusAuthSessionRxOctets, + ruckusAuthSessionTxPkts, + ruckusAuthSessionRxPkts, + ruckusAuthSessionFailureReason, + ruckusAuthSessionFlags, + ruckusAuthSessionAddrType, + ruckusAuthSessionAddr + } + STATUS current + DESCRIPTION "A collection of objects that provide session + information of a FlexAuth session." + ::= { ruckusAuthMIBGroups 6 } + +ruckusAuthStatsGroup OBJECT-GROUP + OBJECTS { + ruckusDot1xSessionsAttempted, + ruckusDot1xSessionsAccepted, + ruckusDot1xSessionsRejected, + ruckusDot1xSessionsInProgress, + ruckusDot1xSessionsErrored, + ruckusMacAuthSessionsAttempted, + ruckusMacAuthSessionsAccepted, + ruckusMacAuthSessionsRejected, + ruckusMacAuthSessionsInProgress, + ruckusMacAuthSessionsErrored + } + STATUS current + DESCRIPTION "A collection of objects that provide session + statistics of FlexAuth sessions at port level." + ::= { ruckusAuthMIBGroups 7 } + +ruckusDot1xAuthStatsGroup OBJECT-GROUP + OBJECTS { + ruckusDot1xTxEAPFrames, + ruckusDot1xTxEAPReqIdFrames, + ruckusDot1xTxEAPReqFrames, + ruckusDot1xRxEAPFrames, + ruckusDot1xRxEAPStartFrames, + ruckusDot1xRxEAPLogOffFrames, + ruckusDot1xRxEAPRespIdFrames, + ruckusDot1xRxEAPRespFrames, + ruckusDot1xRxEAPInvalidFrames, + ruckusDot1xRxLengthErrorFrames, + ruckusDot1xRxEAPLastFrameVersion, + ruckusDot1xRxEAPLastFrameSource + } + STATUS current + DESCRIPTION "A collection of objects that provide Dot1x + statistics of Dot1x sessions at port level." + ::= { ruckusAuthMIBGroups 8 } + +ruckusWebAuthConfigGroup OBJECT-GROUP + OBJECTS { + ruckusWebAuthEnable, + ruckusWebAuthTrustPort, + ruckusWebAuthMode, + ruckusWebAuthMethod, + ruckusWebAuthMaxHosts, + ruckusWebAuthMaxAuthAttempts, + ruckusWebAuthReauthTime, + ruckusWebAuthCycleTime, + ruckusWebAuthBlockTime, + ruckusWebAuthMacAgeTime, + ruckusWebAuthPasscode, + ruckusWebAuthLocalUserDb, + ruckusWebAuthSecureLogin, + ruckusWebAuthAccounting, + ruckusWebAuthCaptiveProfile, + ruckusWebAuthRedirectName, + ruckusWebAuthDnsFilterType, + ruckusWebAuthDnsFilterAddr, + ruckusWebAuthDnsFilterPrefix, + ruckusWebAuthWhiteListType, + ruckusWebAuthWhiteListAddr, + ruckusWebAuthWhiteListPrefix, + ruckusWebAuthFilterPort, + ruckusWebAuthFilterDuration, + ruckusWebAuthFilterAction, + ruckusWebAuthCaptivePortalType, + ruckusWebAuthCaptivePortalAddr, + ruckusWebAuthCaptivePortalPort, + ruckusWebAuthCaptivePortalLoginPage + } + STATUS current + DESCRIPTION "A collection of objects that provide WebAuth + configuration." + ::= { ruckusAuthMIBGroups 9 } + +END diff --git a/foundry/RUCKUS-DHCPCLIENT-MIB.mib b/foundry/RUCKUS-DHCPCLIENT-MIB.mib new file mode 100644 index 000000000..db751751c --- /dev/null +++ b/foundry/RUCKUS-DHCPCLIENT-MIB.mib @@ -0,0 +1,92 @@ +RUCKUS-DHCPCLIENT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, IpAddress, Integer32, + TimeTicks, Counter32 + FROM SNMPv2-SMI + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + RowStatus, MacAddress + FROM SNMPv2-TC + InterfaceIndexOrZero + FROM IF-MIB; + +ruckusDhcpClientMIB MODULE-IDENTITY + LAST-UPDATED "202007290000Z" -- Jul 29, 2020 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + " + Technical Support Center, Ruckus Wireless, Inc, + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + " + Copyright 2020 Ruckus Wireless, Inc.. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any + revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification. + " + REVISION "202007290000Z" -- Jul 29, 2020 + DESCRIPTION + "Initial Version" + ::= { snSwitch 46 } + +-- +-- Define the DHCP Client Tables. +-- + ruckusDhcpClientGlobalObjects OBJECT IDENTIFIER ::= { ruckusDhcpClientMIB 1 } + +-- ================================================================= +-- DHCPv4 Client Global Scalar Object Section +-- ================================================================= + +ruckusDhcpClientGlobalConfigState OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure state for DHCP client on the global level. + enabled(1) - DHCPv4 client is enabled. + disabled(0) - DHCPv4 client is disabled. + Note: DHCPv4 server should be disabled when enabling DHCP client." + DEFVAL { enabled } + ::= {ruckusDhcpClientGlobalObjects 1} + +ruckusDhcpClientGlobalAutoUpdateConfigState OBJECT-TYPE + SYNTAX INTEGER { disabled(0), enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure state for DHCP client auto-update on the global level. + enabled(1) - DHCPv4 client auto-update is enabled. + disabled(0) - DHCPv4 client auto-update is disabled." + DEFVAL { enabled } + ::= {ruckusDhcpClientGlobalObjects 2} + +ruckusDhcpClientSpecificVEPort OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure state of DHCP client on specific VE at the global level. + If DHCP client is configured at specific VE, ifIndex of the DHCP + client enabled VE port is returned. + If DHCP Client is not configured on VE port, zero is returned. + Note: DHCPv4 client should be enabled globally when enabling DHCP + client on specific VE. In switch, the feature is not supported + and zero value will be returned for this OID." + + DEFVAL { 0 } + ::= {ruckusDhcpClientGlobalObjects 3} + +END diff --git a/foundry/RUCKUS-DHCPV6-SNOOPING-MIB.mib b/foundry/RUCKUS-DHCPV6-SNOOPING-MIB.mib new file mode 100644 index 000000000..24e85fecc --- /dev/null +++ b/foundry/RUCKUS-DHCPV6-SNOOPING-MIB.mib @@ -0,0 +1,297 @@ +RUCKUS-DHCPV6-SNOOPING-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress + FROM SNMPv2-SMI + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + NDType, NDState + FROM RUCKUS-NDI-MIB + MacAddress, TruthValue, TEXTUAL-CONVENTION + FROM SNMPv2-TC + Ipv6Address + FROM IPV6-TC + VlanIndex + FROM Q-BRIDGE-MIB --RFC 2674 + DisplayString + FROM FOUNDRY-SN-AGENT-MIB + ifIndex + FROM IF-MIB; --RFC 2863 + +ruckusDhcpv6SnoopMIB MODULE-IDENTITY + LAST-UPDATED "202008040000Z" -- Aug 4, 2020 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + "Management Information for configuration of DHCPv6 Snooping feature. + DHCPv6 Snooping is a security feature which enables the device to filter + untrusted DHCPv6 packets in a subnet. It can also stop unauthorized DHCPv6 + serves and prevent errors due to user mis-configuration servers. + + Copyright 1996-2020 Ruckus Wireless, Inc. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the specification, and any unintended + consequence it may on the user environment." + + ::= { snSwitch 48} + +-- +-- Textual Conventions +-- + +ClearAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents action of Clear operation to be used." + SYNTAX INTEGER{ + valid(0), + clear(1) + } + +ruckusDhcpv6SnoopNotify OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopMIB 0 } +ruckusDhcpv6SnoopObjects OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopMIB 1 } +ruckusDhcpv6SnoopConformance OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopMIB 2 } + +ruckusDhcpv6SnoopGlobalObjects OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopObjects 1 } +ruckusDhcpv6SnoopVlan OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopObjects 2 } +ruckusDhcpv6SnoopInterface OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopObjects 3 } +ruckusDhcpv6SnoopBind OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopObjects 4 } + +-- +-- DHCPv6 Snooping global Scalar Object +-- + +ruckusDhcpv6SnoopGlobalClearOper OBJECT-TYPE + SYNTAX ClearAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "valid(0) - this value is always returned when the variable is read. + clear(1) - setting the variable to this value clears all entries in the + DHCPv6 binding database." + ::= { ruckusDhcpv6SnoopGlobalObjects 1 } + +-- +-- DHCPv6 Snooping VLAN configuration table +-- + +ruckusDhcpv6SnoopVlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusDhcpv6SnoopVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the mechanism to control DHCPv6 Snooping + per VLAN. When a VLAN is created in a device + supporting this table, a corresponding entry of this table + will be added." + ::= { ruckusDhcpv6SnoopVlan 1 } + +ruckusDhcpv6SnoopVlanConfigEntry OBJECT-TYPE + SYNTAX RuckusDhcpv6SnoopVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable + or disable DHCPv6 Snooping at the existing VLAN." + INDEX { ruckusDhcpv6SnoopVlanConfigVLanId } + ::= { ruckusDhcpv6SnoopVlanConfigTable 1 } + +RuckusDhcpv6SnoopVlanConfigEntry ::= SEQUENCE { + ruckusDhcpv6SnoopVlanConfigVLanId + VlanIndex, + ruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable + TruthValue + } + +ruckusDhcpv6SnoopVlanConfigVLanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN number on which DHCP + Snooping feature is configured." + ::= { ruckusDhcpv6SnoopVlanConfigEntry 1 } + +ruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether DHCPv6 Snooping is enabled in this VLAN. + + If this object is set to 'true', DHCPv6 Snooping is enabled. + If this object is set to 'false', DHCPv6 Snooping is disabled." + DEFVAL { false } + ::= { ruckusDhcpv6SnoopVlanConfigEntry 2 } + +-- +-- DHCPv6 Snooping Interface configuration table +-- + +ruckusDhcpv6SnoopIfConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusDhcpv6SnoopIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the mechanism to configure the trust + state for DHCPv6 Snooping purpose at each physical + interface." + ::= { ruckusDhcpv6SnoopInterface 1 } + +ruckusDhcpv6SnoopIfConfigEntry OBJECT-TYPE + SYNTAX RuckusDhcpv6SnoopIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable or + disable trust state for DHCPv6 Snooping at each + physical interface capable of this feature." + INDEX { ifIndex } + ::= { ruckusDhcpv6SnoopIfConfigTable 1 } + +RuckusDhcpv6SnoopIfConfigEntry ::= SEQUENCE { + ruckusDhcpv6SnoopIfConfigTrustValue + TruthValue + } + +ruckusDhcpv6SnoopIfConfigTrustValue OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether the interface is trusted for + DHCPv6 Snooping. + If this object is set to 'true', the interface is trusted. + DHCPv6 packets coming to this interface will be forwarded + without checking. + If this object is set to 'false', the interface is not trusted. + DHCPv6 packets received on this interface will be subjected + to DHCPv6 checks." + DEFVAL { false } + ::= { ruckusDhcpv6SnoopIfConfigEntry 1 } + +-- +-- DHCPv6 Snooping binding database table +-- Use this table to display DHCPv6 Snooping entries +-- + +ruckusDhcpv6SnoopBindTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusDhcpv6SnoopBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the information of DHCPv6 snooping + binding database learnt by the device" + ::= { ruckusDhcpv6SnoopBind 1 } + +ruckusDhcpv6SnoopBindEntry OBJECT-TYPE + SYNTAX RuckusDhcpv6SnoopBindEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the information of DHCPv6 snoonping entry." + INDEX { ruckusDhcpv6SnoopBindMacAddr, ruckusDhcpv6SnoopBindVlanId} + ::= { ruckusDhcpv6SnoopBindTable 1 } + +RuckusDhcpv6SnoopBindEntry ::= SEQUENCE { + ruckusDhcpv6SnoopBindMacAddr + MacAddress, + ruckusDhcpv6SnoopBindVlanId + VlanIndex, + ruckusDhcpv6SnoopBindIpAddr + Ipv6Address, + ruckusDhcpv6SnoopBindType + NDType, + ruckusDhcpv6SnoopBindState + NDState, + ruckusDhcpv6SnoopBindPort + Integer32, + ruckusDhcpv6SnoopBindClearOper + ClearAction + } + +ruckusDhcpv6SnoopBindMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The device MAC address." + ::= { ruckusDhcpv6SnoopBindEntry 1 } + +ruckusDhcpv6SnoopBindVlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN number on which DHCPv6 snooping + feature is configured." + ::= { ruckusDhcpv6SnoopBindEntry 2 } + +ruckusDhcpv6SnoopBindIpAddr OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device IP address." + ::= { ruckusDhcpv6SnoopBindEntry 3} + +ruckusDhcpv6SnoopBindType OBJECT-TYPE + SYNTAX NDType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the ND entry" + ::= { ruckusDhcpv6SnoopBindEntry 4 } + +ruckusDhcpv6SnoopBindState OBJECT-TYPE + SYNTAX NDState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the ND entry" + ::= { ruckusDhcpv6SnoopBindEntry 5 } + +ruckusDhcpv6SnoopBindPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port of the ND entry" + ::= { ruckusDhcpv6SnoopBindEntry 6 } + +ruckusDhcpv6SnoopBindClearOper OBJECT-TYPE + SYNTAX ClearAction + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "valid(0) - this value is always returned when the variable is read. + clear(1) - setting the variable to this value clears this entry in the + DHCPv6 binding database." + ::= {ruckusDhcpv6SnoopBindEntry 7 } + +-- -------------------------------------------------------------------------------- +-- DHCPv6Snooping MIB Conformance +-- -------------------------------------------------------------------------------- +ruckusDhcpv6SnoopCompliances OBJECT IDENTIFIER ::= { ruckusDhcpv6SnoopConformance 1 } + +ruckusDhcpv6SnoopCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entities which + implement RUCKUS-DHCPv6Snoop-MIB." + MODULE -- this module + ::= { ruckusDhcpv6SnoopConformance 1 } + + END diff --git a/foundry/RUCKUS-NDI-MIB.mib b/foundry/RUCKUS-NDI-MIB.mib new file mode 100644 index 000000000..f99b2e9c3 --- /dev/null +++ b/foundry/RUCKUS-NDI-MIB.mib @@ -0,0 +1,295 @@ +RUCKUS-NDI-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress + FROM SNMPv2-SMI + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + Ipv6Address + FROM IPV6-TC -- [RFC2465] + MacAddress, TruthValue, RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC + VlanIndex + FROM Q-BRIDGE-MIB + InterfaceIndex, ifIndex + FROM IF-MIB; + +ruckusNdiMIB MODULE-IDENTITY + LAST-UPDATED "202006110000Z" -- Jun 11, 2020 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + "Management Information for configuration of Neighbour Discovery inspection feature. + NDI is a security mechanism which validates all ND packets + in a subnet and discard those packets with invalid IPv6 to MAC address bindings. + + Copyright 1996-2020 Ruckus Wireless, Inc. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the specification, and any unintended + consequence it may on the user environment." + + ::= { snSwitch 47} + +-- +-- Textual Conventions +-- + +NDType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents type of ND entry to be used." + SYNTAX INTEGER{ + other(1), + static(2), + dynamic(3), + inspect(4), + dhcpv6(5), + dynamicDhcpv6(6), + staticDhcpv6(7), + host(8) + } + +NDState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents state of ND entry to be used." + SYNTAX INTEGER{ + other(1), + valid(2), + pend(3) + } + +ruckusNdiNotify OBJECT IDENTIFIER ::= { ruckusNdiMIB 0 } +ruckusNdiObjects OBJECT IDENTIFIER ::= { ruckusNdiMIB 1 } +ruckusNdiConformance OBJECT IDENTIFIER ::= { ruckusNdiMIB 2 } + +ruckusNdiVlan OBJECT IDENTIFIER ::= { ruckusNdiObjects 1 } +ruckusNdiInterface OBJECT IDENTIFIER ::= { ruckusNdiObjects 2 } +ruckusNdiNDInspect OBJECT IDENTIFIER ::= { ruckusNdiObjects 3 } + +-- +-- Neighbor Discovery Inspection VLAN configuration table +-- Only for IPv6 +-- + +ruckusNdiVlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusNdiVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the mechanism to control Neighbor Discovery + Inspection per VLAN. When a VLAN is created in a device + supporting this table, a corresponding entry of this table + will be added." + ::= { ruckusNdiVlan 1 } + +ruckusNdiVlanConfigEntry OBJECT-TYPE + SYNTAX RuckusNdiVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable + or disable Neighbor Discovery Inspection at the existing VLAN." + INDEX { ruckusNdiVlanConfigVlanId } + ::= { ruckusNdiVlanConfigTable 1 } + +RuckusNdiVlanConfigEntry ::= SEQUENCE { + ruckusNdiVlanConfigVlanId + VlanIndex, + ruckusNdiVlanDynNDInspectionEnable + TruthValue + } + +ruckusNdiVlanConfigVlanId OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the VLAN number on which Neighbor Discovery + Inspection feature is configured." + ::= { ruckusNdiVlanConfigEntry 1 } + +ruckusNdiVlanDynNDInspectionEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether Neighbor Discovery Inspection is + enabled in this VLAN. + If this object is set to 'true', Neighbor Discovery Inspection is enabled. + If this object is set to 'false', Neighbor Discovery Inspection is disabled." + DEFVAL { false } + ::= { ruckusNdiVlanConfigEntry 2 } + +-- +-- Neighbor Discovery Inspection Interface configuration table +-- Only for IPv6 +-- + +ruckusNdInspectIfConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusNdiIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the mechanism to configure the trust + state for Neighbor Discovery Inspection purpose at each physical + interface." + ::= { ruckusNdiInterface 1 } + +ruckusNdiIfConfigEntry OBJECT-TYPE + SYNTAX RuckusNdiIfConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable or + disable trust state for Neighbor Discovery Inspection at each + physical interface capable of this feature." + INDEX { ifIndex } + ::= { ruckusNdInspectIfConfigTable 1 } + +RuckusNdiIfConfigEntry ::= SEQUENCE { + ruckusNdiIfTrustValue + TruthValue + } + +ruckusNdiIfTrustValue OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether the interface is trusted for + Neighbor Discovery Inspection. + If this object is set to 'true', the interface is trusted. + ND packets coming to this interface will be forwarded + without checking. + If this object is set to 'false', the interface is not trusted. + ND packets received on this interface will be subjected + to ND inspection." + DEFVAL { false } + ::= { ruckusNdiIfConfigEntry 1 } + +-- +-- Neighbor Discovery Inspection entry table +-- Use this table to configure and display the inspection ND entries +-- + +ruckusNdiStaticNDInspectTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusNdiStaticNDInspectEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table provides the mechanism to control Neighbor Discovery + Inspection entries created by the user. When an IP-MAC mapping + entry is created in a device supporting this table, a + corresponding entry of this table will be added." + ::= { ruckusNdiNDInspect 1 } + +ruckusNdiStaticNDInspectEntry OBJECT-TYPE + SYNTAX RuckusNdiStaticNDInspectEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to map a device + IP address with its MAC address." + INDEX { ruckusNdiStaticNDInspectIpv6Addr } + ::= { ruckusNdiStaticNDInspectTable 1 } + +RuckusNdiStaticNDInspectEntry ::= SEQUENCE { + ruckusNdiStaticNDInspectIpv6Addr + Ipv6Address, + ruckusNdiStaticNDInspectMacAddr + MacAddress, + ruckusNdiStaticNDInspectType + NDType, + ruckusNdiStaticNDInspectState + NDState, + ruckusNdiStaticNDInspectAge + Unsigned32, + ruckusNdiStaticNDInspectPort + InterfaceIndex, + ruckusNdiStaticNDInspectRowStatus + RowStatus + } + +ruckusNdiStaticNDInspectIpv6Addr OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The device IPv6 address." + ::= { ruckusNdiStaticNDInspectEntry 1} + +ruckusNdiStaticNDInspectMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The device MAC address." + ::= { ruckusNdiStaticNDInspectEntry 2 } + +ruckusNdiStaticNDInspectType OBJECT-TYPE + SYNTAX NDType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the ND entry" + ::= { ruckusNdiStaticNDInspectEntry 3 } + +ruckusNdiStaticNDInspectState OBJECT-TYPE + SYNTAX NDState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the ND entry" + ::= { ruckusNdiStaticNDInspectEntry 4 } + +ruckusNdiStaticNDInspectAge OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timer of the ND entry" + ::= { ruckusNdiStaticNDInspectEntry 5 } + +ruckusNdiStaticNDInspectPort OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifindex vlaue of a port of the ND entry" + ::= { ruckusNdiStaticNDInspectEntry 6 } + +ruckusNdiStaticNDInspectRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the entry in the table." + ::= { ruckusNdiStaticNDInspectEntry 7 } + +-- -------------------------------------------------------------------------------- +-- NDI MIB Conformance +-- -------------------------------------------------------------------------------- +ruckusNdiCompliances OBJECT IDENTIFIER ::= { ruckusNdiConformance 1 } + +ruckusNdiCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entities which + implement RUCKUS-NDI-MIB." + MODULE -- this module + ::= { ruckusNdiCompliances 1 } + + END diff --git a/foundry/RUCKUS-VXLAN-MIB.mib b/foundry/RUCKUS-VXLAN-MIB.mib new file mode 100644 index 000000000..2b76f7640 --- /dev/null +++ b/foundry/RUCKUS-VXLAN-MIB.mib @@ -0,0 +1,729 @@ +RUCKUS-VXLAN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress, Counter64 + FROM SNMPv2-SMI + TruthValue + FROM SNMPv2-TC + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB + DisplayString + FROM FOUNDRY-SN-AGENT-MIB; + +ruckusVxlanMIB MODULE-IDENTITY + LAST-UPDATED "202110290000Z" -- Oct 29, 2021 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: https://support.ruckuswireless.com/contact-us" + DESCRIPTION + "Management Information for configuration of VxLAN feature. + VxLAN is a Layer 3 feature which helps to extend a Local Area Network + over devices which are separated over different subnets. + + Copyright 1996-2021 Ruckus Wireless, Inc. + All rights reserved. + This Ruckus Wireless, Inc SNMP Management Information Base Specification + embodies Ruckus Wireless, Inc' confidential and proprietary + intellectual property. Ruckus Wireless, Inc retains all + title and ownership in the Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus Wireless, Inc makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the specification, and any unintended + consequence it may on the user environment." + + REVISION "202110290000Z" -- Oct 29, 2021 + DESCRIPTION + "initial version to support Vxlan feature in FI9010" + + ::= { snSwitch 49} + +ruckusVxlanObjects OBJECT IDENTIFIER ::= { ruckusVxlanMIB 1 } + +ruckusVxlanOverlayGateway OBJECT IDENTIFIER ::= { ruckusVxlanObjects 1 } + +-- Table for Overlay Gateway Config and Show Attributes + +ruckusVxlanOverlayGatewayTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusVxlanOverlayGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the general configuration details + related to an overlay gateway. When a new overlay Gateway + is created a new entry will be added in this table" + ::= { ruckusVxlanOverlayGateway 1 } + +ruckusVxlanOverlayGatewayEntry OBJECT-TYPE + SYNTAX RuckusVxlanOverlayGatewayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An row instance of the Overlay Gateway table." + INDEX { ruckusVxlanOverlayGatewayName } + ::= { ruckusVxlanOverlayGatewayTable 1 } + +RuckusVxlanOverlayGatewayEntry ::= SEQUENCE { + ruckusVxlanOverlayGatewayName + DisplayString, + ruckusVxlanOverlayGatewayType + INTEGER, + ruckusVxlanOverlayGatewayLoopbackId + Integer32, + ruckusVxlanOverlayGatewayMappedVlans + Integer32, + ruckusVxlanOverlayGatewayExtendedSites + Integer32, + ruckusVxlanOverlayGatewayRowStatus + INTEGER + } + +ruckusVxlanOverlayGatewayName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Overlay Gateway Name" + ::= { ruckusVxlanOverlayGatewayEntry 1 } + +ruckusVxlanOverlayGatewayType OBJECT-TYPE + SYNTAX INTEGER { + none(0), + l2Extension(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VxLAN Overlay Gateway Name Type + Only Type Supported is: + 1 - Layer2-Extension " + ::= { ruckusVxlanOverlayGatewayEntry 2 } + +ruckusVxlanOverlayGatewayLoopbackId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VxLAN Overlay Gateway Loopback ID" + ::= { ruckusVxlanOverlayGatewayEntry 3 } + +ruckusVxlanOverlayGatewayMappedVlans OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Overlay Gateway Number of Mapped Vlans" + ::= { ruckusVxlanOverlayGatewayEntry 4 } + +ruckusVxlanOverlayGatewayExtendedSites OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Overlay Gateway Number of Extended Sites" + ::= { ruckusVxlanOverlayGatewayEntry 5 } + +ruckusVxlanOverlayGatewayRowStatus OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + invalid(1)...Setting it to 'invalid' has the effect of + rendering it inoperative.. + valid(2)....the row exists and is valid" + ::= { ruckusVxlanOverlayGatewayEntry 6 } + +-- Table for defining VLAN - VNI Mapping Attributes in an Overlay-Gateway + +ruckusVxlanOverlayGatewayVlanMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusVxlanOverlayGatewayVlanMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the information related to the + vlan - vni mapping which is included in an overlay gateway + If a new vlan- vni mapping is introduced in an overlay gateway + then a new entry will be added to the table." + ::= { ruckusVxlanOverlayGateway 2 } + +ruckusVxlanOverlayGatewayVlanMapEntry OBJECT-TYPE + SYNTAX RuckusVxlanOverlayGatewayVlanMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An row instance of the Overlay Gateway Vlan Map table." + INDEX { ruckusVxlanOverlayGatewayName, + ruckusVxlanOverlayGatewayVlanMapVlanId } + ::= { ruckusVxlanOverlayGatewayVlanMapTable 1 } + +RuckusVxlanOverlayGatewayVlanMapEntry ::= SEQUENCE { + ruckusVxlanOverlayGatewayVlanMapVlanId + Integer32, + ruckusVxlanOverlayGatewayVlanMapVniId + Integer32, + ruckusVxlanOverlayGatewayVlanMapVfiId + Integer32, + ruckusVxlanOverlayGatewayVlanMapCrossConnect + INTEGER, + ruckusVxlanOverlayGatewayVlanMapStatistics + INTEGER, + ruckusVxlanOverlayGatewayVlanMapAccessPortCount + Integer32, + ruckusVxlanOverlayGatewayVlanMapExtendedSite + Integer32, + ruckusVxlanOverlayGatewayVlanMapRowStatus + INTEGER, + ruckusVxlanOverlayGatewayVlanMapInUnicastPackets + Counter64, + ruckusVxlanOverlayGatewayVlanMapInUnicastBytes + Counter64, + ruckusVxlanOverlayGatewayVlanMapInMulticastPackets + Counter64, + ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes + Counter64, + ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets + Counter64, + ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes + Counter64, + ruckusVxlanOverlayGatewayVlanMapOutPackets + Counter64, + ruckusVxlanOverlayGatewayVlanMapOutBytes + Counter64 + } + +ruckusVxlanOverlayGatewayVlanMapVlanId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vlan Index of the VLAN - VNI Mapping" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 1 } + +ruckusVxlanOverlayGatewayVlanMapVniId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VNI Index of the VLAN - VNI Mapping" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 2 } + +ruckusVxlanOverlayGatewayVlanMapVfiId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VFI Index of the VLAN - VNI Mapping" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 3 } + +ruckusVxlanOverlayGatewayVlanMapCrossConnect OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Cross-Connect Setting for a VLAN-VNI Mapping + 0 - If Cross-Connect Setting is Disabled + 1 - If Cross-Connect Setting is Enabled " + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 4 } + +ruckusVxlanOverlayGatewayVlanMapStatistics OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VXLAN Statistics for a VLAN-VNI Mapping + 0 - If Setting is Disabled + 1 - If Setting is Enabled " + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 5 } + +ruckusVxlanOverlayGatewayVlanMapAccessPortCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Access Ports Added to the VLAN" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 6 } + +ruckusVxlanOverlayGatewayVlanMapExtendedSite OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Sites the VLAN - VNI Mapping is extended to" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 7 } + +ruckusVxlanOverlayGatewayVlanMapRowStatus OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + invalid(1)...Setting it to 'invalid' has the effect of + rendering it inoperative.. + valid(2)....the row exists and is valid" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 8 } + +ruckusVxlanOverlayGatewayVlanMapInUnicastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming unicast packets on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 9 } + +ruckusVxlanOverlayGatewayVlanMapInUnicastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming unicast bytes on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 10 } + +ruckusVxlanOverlayGatewayVlanMapInMulticastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming multicast packets on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 11 } + +ruckusVxlanOverlayGatewayVlanMapInMutlticastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming multicast bytes on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 12 } + +ruckusVxlanOverlayGatewayVlanMapInBroadcastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming broadcast packets on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 13 } + +ruckusVxlanOverlayGatewayVlanMapInBroadcastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming broadcast bytes on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 14 } + +ruckusVxlanOverlayGatewayVlanMapOutPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of outgoing packets on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 15 } + +ruckusVxlanOverlayGatewayVlanMapOutBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of outgoing bytes on the VNI" + ::= { ruckusVxlanOverlayGatewayVlanMapEntry 16 } + +-- Table for handling config and show details for a site extended in an overlay gateway + +ruckusVxlanOverlayGatewaySiteTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusVxlanOverlayGatewaySiteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the information related to the + external site which is extended by an overlay-gateway + If a new site is extended by an overlay gateway + then a new entry will be added to the table." + ::= { ruckusVxlanOverlayGateway 3 } + +ruckusVxlanOverlayGatewaySiteEntry OBJECT-TYPE + SYNTAX RuckusVxlanOverlayGatewaySiteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An row instance of the Overlay Gateway Site table." + INDEX { ruckusVxlanOverlayGatewayName, + ruckusVxlanOverlayGatewaySiteName } + ::= { ruckusVxlanOverlayGatewaySiteTable 1 } + +RuckusVxlanOverlayGatewaySiteEntry ::= SEQUENCE { + ruckusVxlanOverlayGatewaySiteName + DisplayString, + ruckusVxlanOverlayGatewaySiteIpAddress + IpAddress, + ruckusVxlanOverlayGatewaySiteStatus + TruthValue, + ruckusVxlanOverlayGatewaySiteRowStatus + INTEGER, + ruckusVxlanOverlayGatewaySiteInUnicastPackets + Counter64, + ruckusVxlanOverlayGatewaySiteInUnicastBytes + Counter64, + ruckusVxlanOverlayGatewaySiteInMulticastPackets + Counter64, + ruckusVxlanOverlayGatewaySiteInMutlticastBytes + Counter64, + ruckusVxlanOverlayGatewaySiteInBroadcastPackets + Counter64, + ruckusVxlanOverlayGatewaySiteInBroadcastBytes + Counter64, + ruckusVxlanOverlayGatewaySiteOutPackets + Counter64, + ruckusVxlanOverlayGatewaySiteOutBytes + Counter64, + ruckusVxlanOverlayGatewaySiteMonitoring + TruthValue, + ruckusVxlanOverlayGatewaySiteKeepAlive + Integer32, + ruckusVxlanOverlayGatewaySiteRetry + Integer32 + } + +ruckusVxlanOverlayGatewaySiteName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Extended Site Name" + ::= { ruckusVxlanOverlayGatewaySiteEntry 1 } + +ruckusVxlanOverlayGatewaySiteIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VxLAN Extended Site's IP Address" + ::= { ruckusVxlanOverlayGatewaySiteEntry 2 } + +ruckusVxlanOverlayGatewaySiteStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Extended Site's Status + True - If Site is up + False - If Site is Down " + ::= { ruckusVxlanOverlayGatewaySiteEntry 3 } + +ruckusVxlanOverlayGatewaySiteRowStatus OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + invalid(1)...Setting it to 'invalid' has the effect of + rendering it inoperative.. + valid(2)....the row exists and is valid" + ::= { ruckusVxlanOverlayGatewaySiteEntry 4 } + +ruckusVxlanOverlayGatewaySiteInUnicastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming unicast packets on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 5 } + +ruckusVxlanOverlayGatewaySiteInUnicastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming unicast bytes on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 6 } + +ruckusVxlanOverlayGatewaySiteInMulticastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming multicast packets on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 7 } + +ruckusVxlanOverlayGatewaySiteInMutlticastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming multicast bytes on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 8 } + +ruckusVxlanOverlayGatewaySiteInBroadcastPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming broadcast packets on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 9 } + +ruckusVxlanOverlayGatewaySiteInBroadcastBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of incoming broadcast bytes on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 10 } + +ruckusVxlanOverlayGatewaySiteOutPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of outgoing packets on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 11 } + +ruckusVxlanOverlayGatewaySiteOutBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of outgoing bytes on the site's Network Virtual Port" + ::= { ruckusVxlanOverlayGatewaySiteEntry 12 } + +ruckusVxlanOverlayGatewaySiteMonitoring OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VxLAN Extended Site's Monitoring Status + True - If Monitoring is Enabled + False - If Monitoring is Disabled " + ::= { ruckusVxlanOverlayGatewaySiteEntry 13 } + +ruckusVxlanOverlayGatewaySiteKeepAlive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VxLAN Extended Site's Monitoring Mechanism + Keep-Alive Value + The Interval after which an ICMP Ping is sent" + ::= { ruckusVxlanOverlayGatewaySiteEntry 14 } + +ruckusVxlanOverlayGatewaySiteRetry OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VxLAN Extended Site's Monitoring Mechanism + Retry Value + The Number of times the ICMP Pings will be sent + to the extended site IP. If a response is not received + after these many retries the remote IP is considered + unreachable " + ::= { ruckusVxlanOverlayGatewaySiteEntry 15 } + +-- Table for defining Extended Vlans in a Site + +ruckusVxlanOverlayGatewaySiteExtVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusVxlanOverlayGatewaySiteExtVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the information related to the + vlans which are extended to an external site which + is extended by an overlay-gateway + If a new vlan is extended to site in an overlay gateway + then a new entry will be added to the table." + ::= { ruckusVxlanOverlayGateway 4 } + +ruckusVxlanOverlayGatewaySiteExtVlanEntry OBJECT-TYPE + SYNTAX RuckusVxlanOverlayGatewaySiteExtVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An row instance of the Overlay Gateway Extended Site Vlan table." + INDEX { ruckusVxlanOverlayGatewayName, + ruckusVxlanOverlayGatewaySiteName, + ruckusVxlanOverlayGatewaySiteExtVlanId } + ::= { ruckusVxlanOverlayGatewaySiteExtVlanTable 1 } + +RuckusVxlanOverlayGatewaySiteExtVlanEntry ::= SEQUENCE { + ruckusVxlanOverlayGatewaySiteExtVlanId + Integer32, + ruckusVxlanOverlayGatewaySiteExtVlanRowStatus + INTEGER + } + +ruckusVxlanOverlayGatewaySiteExtVlanId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vlan Index extended to the site" + ::= { ruckusVxlanOverlayGatewaySiteExtVlanEntry 1 } + +ruckusVxlanOverlayGatewaySiteExtVlanRowStatus OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + invalid(1)...Setting it to 'invalid' has the effect of + rendering it inoperative.. + valid(2)....the row exists and is valid" + ::= { ruckusVxlanOverlayGatewaySiteExtVlanEntry 2 } + +-- Table for defining the List of IPs in the Site + +ruckusVxlanOverlayGatewaySiteIpListTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusVxlanOverlayGatewaySiteIpListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides the information related to the + IPs which are added to the IP List in the site which + is extended by an overlay-gateway. The IP List includes + Primary IP and all the secondary IPs with the index + If a new IP is added to the IP List in an extended site + then a new entry will be added to the table." + ::= { ruckusVxlanOverlayGateway 5 } + +ruckusVxlanOverlayGatewaySiteIpListEntry OBJECT-TYPE + SYNTAX RuckusVxlanOverlayGatewaySiteIpListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An row instance of the Overlay Gateway Site IP List table." + INDEX { ruckusVxlanOverlayGatewayName, + ruckusVxlanOverlayGatewaySiteName, + ruckusVxlanOverlayGatewaySiteIpListIpIndex } + ::= { ruckusVxlanOverlayGatewaySiteIpListTable 1 } + +RuckusVxlanOverlayGatewaySiteIpListEntry ::= SEQUENCE { + ruckusVxlanOverlayGatewaySiteIpListIpIndex + Integer32, + ruckusVxlanOverlayGatewaySiteIpListIpAddress + IpAddress, + ruckusVxlanOverlayGatewaySiteIpListRowStatus + INTEGER + } + +ruckusVxlanOverlayGatewaySiteIpListIpIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index at which the IP is assigned in the IP List" + ::= { ruckusVxlanOverlayGatewaySiteIpListEntry 1 } + +ruckusVxlanOverlayGatewaySiteIpListIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address added to the IP List of the Site" + ::= { ruckusVxlanOverlayGatewaySiteIpListEntry 2 } + +ruckusVxlanOverlayGatewaySiteIpListRowStatus OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + valid(2), + delete(3), + create(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to create and + delete row in the table and control + if they are used. The values + that can be written are: + delete(3)...deletes the row + create(4)...creates a new row + + If the row exists, then a SET with + value of create(4) returns error + 'badValue'. Deleted rows go away + immediately. The following values + can be returned on reads: + noSuch(0)...no such row + invalid(1)...Setting it to 'invalid' has the effect of + rendering it inoperative.. + valid(2)....the row exists and is valid" + ::= { ruckusVxlanOverlayGatewaySiteIpListEntry 3 } + +END diff --git a/foundry/RUCKUS-WIRED-CLIENT-MIB.mib b/foundry/RUCKUS-WIRED-CLIENT-MIB.mib new file mode 100644 index 000000000..d1e485e43 --- /dev/null +++ b/foundry/RUCKUS-WIRED-CLIENT-MIB.mib @@ -0,0 +1,428 @@ +RUCKUS-WIRED-CLIENT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Integer32, + Counter64, + TimeTicks, + IpAddress, + NOTIFICATION-TYPE + FROM SNMPv2-SMI -- [RFC2578] + ifIndex + FROM IF-MIB -- [RFC2863] + VlanIndex + FROM Q-BRIDGE-MIB + MacAddress, + TruthValue, + TEXTUAL-CONVENTION + FROM SNMPv2-TC -- [RFC2579] + InetAddressIPv4,InetAddress, + InetAddressIPv6 + FROM INET-ADDRESS-MIB -- [RFC4001] + EnabledStatus + FROM P-BRIDGE-MIB + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB -- [RFC3411] + DisplayString + FROM FOUNDRY-SN-AGENT-MIB + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + snSwitch + FROM FOUNDRY-SN-SWITCH-GROUP-MIB; + +ruckusWiredClientMIB MODULE-IDENTITY + LAST-UPDATED "202305240000Z" -- May 24, 2023 + ORGANIZATION "Ruckus Wireless, Inc." + CONTACT-INFO + "Technical Support Center + 350 West Java Drive, + Sunnyvale, CA 94089, USA + Support URL: https://support.ruckuswireless.com + Phone: +1-855-782-5871 + ROW TF Numbers: + https://support.ruckuswireless.com/contact-us" + DESCRIPTION + "Management Information for discovering/querying + the directly connected clients of Ruckus ICX + Switches/Routers. The information consists of: + 1. Device MAC/IPv4/IPv6 addresses + 2. Port/VLAN information + 3. User, if client is authenticated + 4. Client usage statistics + + Copyright 1996-2019 Ruckus Wireless, Inc. + All rights reserved. + + This Ruckus Wireless, Inc SNMP MIB Specification + embodies Ruckus Wireless, Inc confidential and + proprietary intellectual property. Ruckus Wireless, + Inc retains all title and ownership in the + Specification, including any revisions. + + This Specification is supplied AS IS, and Ruckus + Wireless, Inc makes no warranty, either express or + implied, as to the use, operation, condition, or + performance of the specification, and any unintended + consequence it may on the user environment." + REVISION + "201902280000Z" -- Feb 28, 2019 + DESCRIPTION + "Initial Version" + REVISION + "202305240000Z" -- May 24, 2023 + DESCRIPTION + "Added new mib objects to fetch the hostname,device type, + OS type and model name of the client connected." + ::= { snSwitch 43 } + +ruckusWiredClientNotify OBJECT IDENTIFIER ::= { ruckusWiredClientMIB 0 } +ruckusWiredClientObjects OBJECT IDENTIFIER ::= { ruckusWiredClientMIB 1 } +ruckusWiredClientConformance OBJECT IDENTIFIER ::= { ruckusWiredClientMIB 2 } +ruckusWiredClients OBJECT IDENTIFIER ::= { ruckusWiredClientObjects 1 } + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- +VlanId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An ID used to represent VLAN identifier in the + system for both untagged and tagged VLANs packets)." + SYNTAX INTEGER (1..4094) + + +-- ------------------------------------------------------------ +-- Client Devices +-- List of devices directly connected Ruckus Device (Switch/Router) +-- ------------------------------------------------------------ + +ruckusWiredClientsTable OBJECT-TYPE + SYNTAX SEQUENCE OF RuckusWiredClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table providing information about the clients + directly connected on all the ports in the Ruckus + devices. + + When FlexAuth is enabled, this table contains entries + for all the authenticated clients (success/failure). + Entries get created when clients are authenticated + and cleared when they logoff or timeout. + + When FlexAuth is not enabled, this table populates the + entries with devices learned through LLDP/CDP, if + LLDP/CDP is enabled." + ::= { ruckusWiredClients 1} + +ruckusWiredClientEntry OBJECT-TYPE + SYNTAX RuckusWiredClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about a specific client + on a given port" + INDEX { ifIndex, ruckusWiredClientMac } + ::= { ruckusWiredClientsTable 1 } + +RuckusWiredClientEntry ::= SEQUENCE { + ruckusWiredClientMac MacAddress, + ruckusWiredClientVlan VlanId, + ruckusWiredClientType INTEGER, + ruckusWiredClientAuthType INTEGER, + ruckusWiredClientStatus INTEGER, + ruckusWiredClientDescr SnmpAdminString, + ruckusWiredClientUserName SnmpAdminString, + ruckusWiredClientV4Addr InetAddressIPv4, + ruckusWiredClientV6Addr InetAddressIPv6, + ruckusWiredClientUpTime TimeTicks, + ruckusWiredClientTxPkts Counter64, + ruckusWiredClientRxPkts Counter64, + ruckusWiredClientTxOctets Counter64, + ruckusWiredClientRxOctets Counter64, + ruckusDhcpClientHostName SnmpAdminString, + ruckusDhcpClientDeviceTypeName SnmpAdminString, + ruckusDhcpClientOsVendorName SnmpAdminString, + ruckusDhcpClientModelName SnmpAdminString + +} + +ruckusWiredClientMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the MAC Address of the client + (device/host) represented by this client entry" + ::= { ruckusWiredClientEntry 1 } + +ruckusWiredClientVlan OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLAN, the client (device/host) belongs + to, represented by this client entry. + + In case of voice-phones, this VLAN is the voice-VLAN + (tagged) and in all other cases, likely it would be + an untagged VLAN, unless it's a tagged VM client" + ::= { ruckusWiredClientEntry 2 } + +ruckusWiredClientType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + phone(2), + wlanAP(3), + router(4), + bridge(5), + cableDevice(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Decribes the type of the client connnected on this port" + ::= { ruckusWiredClientEntry 3 } + +ruckusWiredClientAuthType OBJECT-TYPE + SYNTAX INTEGER { + none(1), + dot1x(2), + macAuth(3), + webAuth(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the authentication method that is used for + authenticating the client on this port represented + by this client (when FlexAuth is enabled). Otherwise, + it's none." + ::= { ruckusWiredClientEntry 4 } + +ruckusWiredClientStatus OBJECT-TYPE + SYNTAX INTEGER { + noAuth(1), + allowed(2), + blocked(3), + restricted(4), + critical(5), + guest(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The authentication state of the client which can + take the following values. + + noAuth - not authenticated + allowed - client authentication is successful, so + the complete access is granted + blocked - client failed authentication, so access + is denied + restrict - client failed authentication, but + allowed restricted access + critical - client authentication timedout, so + access is limited to critical operations + guest - client is not Dot1x capable, so allowed + guest role access" + ::= { ruckusWiredClientEntry 5 } + +ruckusWiredClientDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Desribes the client as derived from LLDP/CDP device + description for LLDP/CDP learned devices. Otherwise + it's an empty string for now." + ::= { ruckusWiredClientEntry 6 } + +ruckusWiredClientUserName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specified the User name associated with the client, + represented by this entry. It coule be username or + MAC address, where user-name is not present and + not applicable." + ::= { ruckusWiredClientEntry 7 } + +ruckusWiredClientV4Addr OBJECT-TYPE + SYNTAX InetAddressIPv4 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IPv4 address of the client represented by this + entry. A client can have both IPv4 and IPv6 + addresses bound on dual-stack hosts." + ::= { ruckusWiredClientEntry 8 } + +ruckusWiredClientV6Addr OBJECT-TYPE + SYNTAX InetAddressIPv6 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IPv6 address of the client represented by this + entry. A client can have both IPv4 and IPv6 + addresses bound on dual-stack hosts." + ::= { ruckusWiredClientEntry 9 } + +ruckusWiredClientUpTime OBJECT-TYPE + SYNTAX TimeTicks + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time the client had been up from the + time the client entry is created in the Ruckus device." + ::= { ruckusWiredClientEntry 10 } + +ruckusWiredClientTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets transmitted on this port + for this client." + ::= { ruckusWiredClientEntry 11 } + +ruckusWiredClientRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received on this port for + this client." + ::= { ruckusWiredClientEntry 12 } + +ruckusWiredClientTxOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted on this port + for this client." + ::= { ruckusWiredClientEntry 13 } + +ruckusWiredClientRxOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets receivedon this port for + this client." + ::= { ruckusWiredClientEntry 14 } + +ruckusDhcpClientHostName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specified the Host name associated with the client, + represented by this entry." + ::= { ruckusWiredClientEntry 15 } + +ruckusDhcpClientDeviceTypeName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specified the Device type name (mobile,laptop) associated with the +client, + represented by this entry." + ::= { ruckusWiredClientEntry 16 } + +ruckusDhcpClientOsVendorName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specified the OS vendor name associated with the client, + represented by this entry." + ::= { ruckusWiredClientEntry 17 } + +ruckusDhcpClientModelName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specified the Device mode name associated with the client, + represented by this entry." + ::= { ruckusWiredClientEntry 18 } + + +-- ------------------------------------------------------------ +-- Client MIB Notifications +-- ------------------------------------------------------------ +ruckusWiredClientConnectedNotify NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusWiredClientMac + } + STATUS current + DESCRIPTION "This notification is sent if a client is detected + and/or authenticated." + ::= { ruckusWiredClientNotify 1 } + +ruckusWiredClientDisconnectedNotify NOTIFICATION-TYPE + OBJECTS { + ifIndex, + ruckusWiredClientMac + } + STATUS current + DESCRIPTION "This notification is sent if client is deleted + for reasons such as log-off or inactivity." + ::= { ruckusWiredClientNotify 2 } + + +-- ------------------------------------------------------------ +-- Client MIB Conformance +-- ------------------------------------------------------------ +ruckusWiredClientMIBCompliances OBJECT IDENTIFIER ::= { ruckusWiredClientConformance 1 } +ruckusWiredClientMIBGroups OBJECT IDENTIFIER ::= { ruckusWiredClientConformance 2 } + +ruckusWiredClientCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for entities which + implement RUCKUS-CLIENT-MIB." + MODULE -- this module + MANDATORY-GROUPS { ruckusWiredClientGroup } + ::= { ruckusWiredClientMIBCompliances 1 } + +------------------------ +-- Units of Conformance +------------------------ + +ruckusWiredClientGroup OBJECT-GROUP + OBJECTS { + ruckusWiredClientMac, + ruckusWiredClientVlan, + ruckusWiredClientType, + ruckusWiredClientAuthType, + ruckusWiredClientStatus, + ruckusWiredClientDescr, + ruckusWiredClientUserName, + ruckusWiredClientV4Addr, + ruckusWiredClientV6Addr, + ruckusWiredClientUpTime, + ruckusWiredClientTxPkts, + ruckusWiredClientRxPkts, + ruckusWiredClientTxOctets, + ruckusWiredClientRxOctets, + ruckusDhcpClientHostName, + ruckusDhcpClientDeviceTypeName, + ruckusDhcpClientOsVendorName, + ruckusDhcpClientModelName + + } + STATUS current + DESCRIPTION "A collection of objects that provide client + information for a specific client." + ::= { ruckusWiredClientMIBGroups 1 } + +END