VS extension & nanoff cli can't detect the device

[jxnkwlp]

Tool

Visual Studio extension

Description

VS extension and nanoff cli can't be detect the device. i try solution from other issues, but not working .

The chip is esp32-s3 wroom n8r2.

How to reproduce

1. flash command and result is ok.

nanoff --update --platform esp32 --target ESP32_S3 --serialport COM5 -v diag --baud 115200 --masserase

2. Check output when start.

---- Opened the serial port COM5 ----
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x9 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3818,len:0x1380
load:0x403c9700,len:0x4
load:0x403c9704,len:0xba4
load:0x403cc700,len:0x2c5c
SHA-256 comparison failed:
Calculated: 355e2a6e0d4849dc88faff8966c6e20bcbf425d872672e90795b46c85cffdfdb
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway...
entry 0x403c98f0
I (45) boot: .NET nanoFramework 2nd stage bootloader ESP-IDF v5.1.3
I (45) boot: build Jun 16 2024 05:11:39
I (45) boot: chip revision: v0.2
I (49) boot.esp32s3: Boot SPI Speed : 80MHz
I (54) boot.esp32s3: SPI Mode       : DIO
I (59) boot.esp32s3: SPI Flash Size : 8MB
I (63) boot: Enabling RNG early entropy source...
I (69) boot: Partition Table:
I (72) boot: ## Label            Usage          Type ST Offset   Length
I (80) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (87) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (95) boot:  2 factory          factory app      00 00 00010000 001a0000
I (102) boot:  3 deploy           Unknown data     01 84 001b0000 002e0000
I (110) boot:  4 config           Unknown data     01 82 00490000 00200000
I (117) boot: End of partition table
I (121) esp_image: segment 0: paddr=00010020 vaddr=3c0d0020 size=24f78h (151416) map
I (147) esp_image: segment 1: paddr=00034fa0 vaddr=3fc99e00 size=03ea8h ( 16040) load
I (149) esp_image: segment 2: paddr=00038e50 vaddr=40374000 size=071c8h ( 29128) load
I (157) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=ce638h (845368) map
I (256) esp_image: segment 4: paddr=0010e660 vaddr=4037b1c8 size=0ebech ( 60396) load
I (265) esp_image: segment 5: paddr=0011d254 vaddr=600fe000 size=00064h (   100) load
I (275) boot: Loaded app from partition at offset 0x10000
I (275) boot: Disabling RNG early entropy source...

3. Check vs extensions & nano cli, can't be detect the device.

vs extension

[NanoDevices: new device arrival COM5]
[NanoDevices: candidate nano device COM5]
[NanoDevices: checking device  COM5 @ 921600]
[NanoDevices: checking device  COM5 @ 460800]
[NanoDevices: checking device  COM5 @ 115200]
[NanoDevices: checking device  COM5 *** 2nd attempt ***]
[NanoDevices: checking device  COM5 @ 921600]
[NanoDevices: checking device  COM5 @ 460800]
[NanoDevices: checking device  COM5 @ 115200]
[NanoDevices: quitting device COM5]
[NanoDevices: Serial device enumeration completed. Found 0 devices]

nanoff --listdevices  -v diag

.NET nanoFramework Firmware Flasher v2.5.86+e504cd875d
Copyright (C) 2019 .NET Foundation and nanoFramework project contributors


No devices found

5. try deploy test project image

public static void Main()
{
    while (true)
    {
        Debug.WriteLine("Hello from nanoFramework!");

        Thread.Sleep(1500);
    }
}

deploy image

nanoff --deploy --platform esp32 --target ESP32_S3 --serialport COM5  -v diag --image "xxxxxxx\NFApp1\bin\Debug\NFApp1.bin"

check output

---- Opened the serial port COM5 ----
Hello from nanoFramework!
Hello from nanoFramework!
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3818,len:0x1380
load:0x403c9700,len:0x4
load:0x403c9704,len:0xba4
load:0x403cc700,len:0x2c5c
SHA-256 comparison failed:
Calculated: 355e2a6e0d4849dc88faff8966c6e20bcbf425d872672e90795b46c85cffdfdb
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway...
entry 0x403c98f0
I (45) boot: .NETðESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3818,len:0x1380
load:0x403c9700,len:0x4
load:0x403c9704,len:0xba4
load:0x403cc700,len:0x2c5c
SHA-256 comparison failed:
Calculated: 355e2a6e0d4849dc88faff8966c6e20bcbf425d872672e90795b46c85cffdfdb
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway...
entry 0x403c98f0
I (45) boot: .NET nanoFramework 2nd stage bootloader ESP-IDF v5.1.3
I (45) boot: build Jun 16 2024 05:11:39
I (45) boot: chip revision: v0.2
I (49) boot.esp32s3: Boot SPI Speed : 80MHz
I (54) boot.esp32s3: SPI Mode       : DIO
I (59) boot.esp32s3: SPI Flash Size : 8MB
I (63) boot: Enabling RNG early entropy source...
I (69) boot: Partition Table:
I (72) boot: ## Label            Usage          Type ST Offset   Length
I (80) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (87) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (95) boot:  2 factory          factory app      00 00 00010000 001a0000
I (102) boot:  3 deploy           Unknown data     01 84 001b0000 002e0000
I (110) boot:  4 config           Unknown data     01 82 00490000 00200000
I (117) boot: End of partition table
I (121) esp_image: segment 0: paddr=00010020 vaddr=3c0d0020 size=24f78h (151416) map
I (147) esp_image: segment 1: paddr=00034fa0 vaddr=3fc99e00 size=03ea8h ( 16040) load
I (149) esp_image: segment 2: paddr=00038e50 vaddr=40374000 size=071c8h ( 29128) load
I (157) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=ce638h (845368) map
I (256) esp_image: segment 4: paddr=0010e660 vaddr=4037b1c8 size=0ebech ( 60396) load
I (265) esp_image: segment 5: paddr=0011d254 vaddr=600fe000 size=00064h (   100) load
I (275) boot: Loaded app from partition at offset 0x10000
I (275) boot: Disabling RNG early entropy source...
Hello from nanoFramework!
Hello from nanoFramework!
Hello from nanoFramework!
Hello from nanoFramework!
Hello from nanoFramework!
Hello from nanoFramework!
Hello from nanoFramework!

6. Check vs extensions & nano cli again, can't detect the device.

Expected behaviour

No response

Screenshots

No response

Aditional context

No response

[alberk8]

@jxnkwlp , the nanoff command nanoff --update --platform esp32 --target ESP32_S3 You either use --platform esp32 for the nanoff to detect the chip/mcp or --target ESP32_S3 for specific chip/mcu, don't use both.

One more thing, is your ESP32 S3 have one or two USB C? If there is two then you need to plug in the one on the left for VS to detect.

[jxnkwlp]

@alberk8

1. I will try the command again.
2. The board have one USB C. and connect by CH340K (with auto program circuit)

[jxnkwlp]

@jxnkwlp , the nanoff command nanoff --update --platform esp32 --target ESP32_S3 You either use --platform esp32 for the nanoff to detect the chip/mcp or --target ESP32_S3 for specific chip/mcu, don't use both.

One more thing, is your ESP32 S3 have one or two USB C? If there is two then you need to plug in the one on the left for VS to detect.

Use command flash again, not working. nanoff cli and vs extension can't detect the device.

btw, i add tx/rx LED on board, and can see the led flashed a few times when detecting

[josesimoes]

This is a support question. Moving to Discussions.