Skip to content

Latest commit

 

History

History
138 lines (101 loc) · 5.79 KB

README.md

File metadata and controls

138 lines (101 loc) · 5.79 KB
Raw

macchina.io REMOTE SSH Client Wrapper (remote-ssh)

remote-ssh is a command-line program that sets up a tunnel for a SSH connection from your local machine (e.g., your PC, Mac, etc.) to a device connected to the macchina.io REMOTE, and then launches an SSH client to open an SSH session.

Note that in contrast to WebTunnelAgent, which typically runs on an embedded or IoT device, remote-ssh, like remote-client, runs on a PC or Mac that you want to connect to the device. You'll have to build the macchina.io REMOTE SDK for your machine to get the remote-ssh program.

Running remote-ssh

remote-ssh usually does not need a configuration file, most parameters can be passed via command-line arguments. Some settings can be set using a configuration file (see the remote-client documentation for more information on configuration files).

At startup, remote-ssh will look for a configuration file named .remote-ssh.properties or .remote-client.properties in the current user's home directory, and read it if it's present.

To run remote-ssh, you'll need to specify the URL of the remote device to connect to (e.g. https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io), as well as the user name to connect to.

remote-ssh -l pi https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io

If running on Windows, the parameters must be passed Windows-style:

remote-ssh /login pi https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io

It is also possible to specify remote username and remote device address in one argument:

remote-ssh [email protected]

On Windows, remote-ssh first looks for ssh.exe, which is available in newer releases of Windows 10 as an optional install. If ssh.exe cannot be found in the executables search path (PATH environment variable), remote-ssh looks for putty.exe. If no SSH client executable could be found, and also no executable has been configured (using the ssh.executable configuration property or /ssh-client command-line argument), an error message is printed and remote-ssh exits.

remote-ssh will prompt for your macchina.io REMOTE username and password and then launch the SSH client with correct parameters for host, port number and remote SSH login name.

The macchina.io REMOTE username and password can also be supplied via environment variables REMOTE_USERNAME and REMOTE_PASSWORD, or via a configuration file.

Like remote-client, remote-ssh can also connect through a proxy server.

Disabling Host Fingerprint Checking and Authenticity Warning

When connecting via SSH to a remote host with remote-ssh, the ssh client will usually warn you that the authenticity of the remote host can't be established, and will prompt you to continue. This can be annoying, especially since remote-ssh normally uses an ephemeral (random) port number that ssh connects to. Therefore you will also end up with lots of entries in your known_hosts file. This can be disabled by adding the following section to the ssh configuration file (usually located in ~/.ssh/config):

Host localhost
  StrictHostKeyChecking no
  UserKnownHostsFile /dev/null
  LogLevel QUIET

The above settings will disable validation of the remote host key and prevent warnings when ssh connects to localhost, as it does when invoked from remote-ssh. It also prevents ssh from writing an entry to the known_hosts file.

Using remote-ssh for Transferring Files Using SCP

On platforms supporting the scp program for secure file transfers, remote-ssh can also be used to launch scp instead of ssh.

However, there's also a separate remote-scp client program which is a bit easier to use.

To copy a file file.txt to the remote system using scp with remote-ssh:

remote-ssh --scp https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io file.txt pi@localhost:file.txt

or, on Windows 10 (with SSH):

remote-ssh /scp https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io file.txt pi@localhost:file.txt

Note that the remote host name must be specified as localhost in this case, as scp actually connects to a local port that is forwarded by remote-ssh to the remote device.

Passing Options to the SSH Client

remote-ssh can pass command-line options to the SSH client. SSH command-line arguments are given on the remote-ssh command-line, separated with a --. For example, to use a private key for authentication:

remote-ssh -l pi https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io -- -i ~/.ssh/mysecret

Passing a Command or Script to the SSH Client

remote-ssh can pass a command for the remote system to ssh. To do so, specify the command using the --command (short: -m; Windows: /command) option. The given command will be passed to ssh after the extra options and the hostname:

remote-ssh -l pi -m "ls -l" https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io

This can also be used to run a script (via pipe of redirection of stdin). However, in this case, the macchina.io REMOTE username and password must be passed as command-line arguments, and bash or another shell must be specified as command to execute via ssh:

remote-ssh -l pi -u rmuser -p rmpasswd -m bash https://8ba57423-ec1a-4f31-992f-a66c240cbfa0.remote.macchina.io <script.sh

Command-Line Arguments Help

You can run remote-ssh without command-line options (or with --help or /help on Windows) to see a help screen with available command-line options.