Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

raspvery pi zero 2 forgets wifi settings if not shutdown properly #3023

Open
Crare opened this issue Jan 14, 2024 · 1 comment
Open

raspvery pi zero 2 forgets wifi settings if not shutdown properly #3023

Crare opened this issue Jan 14, 2024 · 1 comment

Comments

@Crare
Copy link

Crare commented Jan 14, 2024

It seems my raspberry pi has a memory of a gold fish. If I shut it down by plugging the power off it, or the power cuts of because of power outage, it will lose the network settings and during bootup gets stuck on the network-phase.
I have tried shut it down properly through the settings in motioneyeos menus, it works, but sometimes if the power is cut off, all the settings are reset and network settings are lost. This is not durable if power outages happen or some muggle comes and rips off the power plug.

I have set the wpa_supplicant.conf in the Boot-partition.
I have read the troubleshooting at https://github.com/motioneye-project/motioneyeos/wiki/Troubleshooting-Raspberry-PI-Models-A-%28Plus%29-And-Zero

I'm using image from Jawsper for PiZero2W because it has different processor than older PiZeros. #2875
https://github.com/jawsper/motioneyeos/releases version 20220119-dev

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.
yes

I confirm that I have read the FAQ before opening this issue.
yes

motionEyeOS Version

I am running motionEyeOS version: (insert your version here, e.g. 20180314).

Board Model

Raspberry Pi Zero 2 W

Camera

Raspberry Pi Camera Board v2 https://www.adafruit.com/product/3099

Network Connection

WIFI

Peripherals

none

Log Files

I consider the following log files relevant to this issue:

  • (attach e.g. motioneye.log)
  • (attach e.g. boot.log)

I may provide these later if necessary.

@Crare
Copy link
Author

Crare commented Jan 14, 2024

it seems to be that if I change the master password and cut of the power, it will forget network settings.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Development

No branches or pull requests

1 participant