Blacklabelops Volumerize

Blacklabelops backup and restore solution for Docker volume backups. It is based on the command line tool Duplicity. Dockerized and Parameterized for easier use and configuration.

This is not a tool that can clone and backup data from running databases. You should always stop all containers running on your data before doing backups. Always make sure you're not a victim of unexpected data corruption.

Also note that the easier the tools the easier it is to lose data! Always make sure the tool works correct by checking the backup data itself, e.g. S3 bucket. Check the configuration double time and enable some check options this image offers. E.g. attaching volumes read only.

Features:

Multiple Backends
Cron Schedule
Start and Stop Containers

Supported backends:

Filesystem
Amazon S3
DropBox
Google Drive
ssh/scp
rsync

and many more: Duplicity Supported Backends

Unoffical version

While this image may be ahead of the official (deprecated) repo at blacklabelops/volumerize, we do not offically maintain it. We can't provide support on issues but you can always file a pull request and we'll merge and update the docker hub image, if necessary.

This repo is dedicated to keeping the components up to date but there will be no further development beyond the features we are using in-house at Motion Bank.

This repo (and the image at hub.docker.com) uses:

Duplicity 0.8.13
Jobber 1.4.4
Docker CLI 19.03.12
MEGAtools 1.10.3

The docker image is built on top of Alpine Linux 3.12

Volume Backups Tutorials

Docker Volume Backups on:

Backblaze B2: Readme

Amazon S3: Readme

Dropbox: Readme

Google Drive: Readme

Make It Short

You can make backups of your Docker application volume just by typing:

$ docker run --rm \
    --name volumerize \
    -v yourvolume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize backup

Hooks up your volume with the name yourvolume and backups to the volume backup_volume

How It Works

The container has a default startup mode. Any specific behavior is done by defining envrionment variables at container startup (docker run). The default container behavior is to start in daemon mode and do incremental daily backups.

Your application data must be saved inside a Docker volume. You can list your volumes with the Docker command docker volume ls. You have to attach the volume to the backup container using the -v option. Choose an arbitrary name for the folder and add the :rooption to make the sources read only.

Example using Jenkins:

$ docker run \
     -d -p 80:8080 \
     --name jenkins \
     -v jenkins_volume:/jenkins \
     motionbank/jenkins

Starts Jenkins and stores its data inside the Docker volume jenkins_volume.

Now attach the Jenkins data to folders inside the container and tell motionbank/volumerize to backup folder /source to folder /backup.

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize

Will start the Volumerizer. The volume jenkins_volume is now folder /source and backups_volume is now folder /backup inside the container.

You can execute commands inside the container, e.g. doing an immediate backup or even restore:

$ docker exec volumerize backup

Will trigger a backup.

Backup Multiple volumes

The container can backup one source folder, see environment variable VOLUMERIZE_TARGET. If you want to backup multiple volumes you will have to hook up multiple volumes under the same source folder.

Example:

Volume: application_data
Volume: application_database_data
Volume: application_configuration

Now start the container hook them up under the same folder source.

$ docker run -d \
    --name volumerize \
    -v application_data:/source/application_data:ro \
    -v application_database_data:/source/application_database_data:ro \
    -v application_configuration:/source/application_configuration:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize

Will run Volumerize on the common parent folder /source.

Backup Restore

A restore is simple. First stop your Volumerize container and start a another container with the same environment variables and the same volume but without read-only mode! This is important in order to get the same directory structure as when you did your backup!

Tip: Now add the read-only option to your backup container!

Example:

You did your backups with the following settings:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize

Then stop the backup container and restore with the following command. The only difference is that we exclude the read-only option :ro from the source volume and added it to the backup volume:

$ docker stop volumerize
$ docker run --rm \
    -v jenkins_volume:/source \
    -v backup_volume:/backup:ro \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize restore
$ docker start volumerize

Triggers a once time restore. The container for executing the restore command will be deleted afterwards

You can restore from a particular backup by adding a time parameter to the command restore. For example, using restore -t 3D at the end in the above command will restore a backup from 3 days ago. See the Duplicity manual to view the accepted time formats.

To see the available backups, use the command list before doing a restore.

Dry run

You can pass the --dry-run parameter to the restore command in order to test the restore functionality:

$ docker run --rm \
    -v jenkins_volume:/source \
    -v backup_volume:/backup:ro \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize restore --dry-run

But in order to see the differences between backup and source you need the verify command:

$ docker run --rm \
    -v jenkins_volume:/source \
    -v backup_volume:/backup:ro \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    motionbank/volumerize verify

Periodic Backups

The default cron setting for this container is: 0 0 4 * * *. That's four o'clock in the morning UTC. You can set your own schedule with the environment variable VOLUMERIZE_JOBBER_TIME.

You can set the time zone with the environment variable TZ.

The syntax is different from cron because I use Jobber as a cron tool: Jobber Time Strings

Example:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "TZ=Europe/Berlin" \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "VOLUMERIZE_JOBBER_TIME=0 0 3 * * *" \
    motionbank/volumerize

Backups at three o'clock in the morning according to german local time.

Docker Container Restarts

This image can stop and start Docker containers before and after backup. Docker containers are specified using the environment variable VOLUMERIZE_CONTAINERS. Just enter their names in a empty space separated list.

Example:

Docker container application with name application
Docker container application database with name application_database

Note: Needs the parameter -v /var/run/docker.sock:/var/run/docker.sock in order to be able to start and stop containers on the host.

Example:

$ docker run -d \
    --name volumerize \
    -v /var/run/docker.sock:/var/run/docker.sock \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "VOLUMERIZE_CONTAINERS=application application_database" \
    motionbank/volumerize

The startup routine will be applied to the following scripts: backup, backupFull, restore and periodBackup.

Test the routine!

$ docker exec volumerize backup

Additional Docker CLI API configurations

If the docker host version is earlier than 1.12 then include the following docker api setting, Volumerize uses docker CLI ver 19.03.12 which uses Docker API version 1.40. One needs to set the compatible API version of the docker host ie. Docker host version 19.03 uses API 1.40

docker version
Client: Docker Engine - Community
 Version:           19.03.6
 API version:       1.40
 Go version:        go1.12.16
 Git commit:        369ce74a3c
 Built:             Thu Feb 13 01:27:49 2020
 OS/Arch:           linux/amd64
 Experimental:      false

Server: Docker Engine - Community
 Engine:
  Version:          19.03.6
  API version:      1.40 (minimum version 1.12)
  Go version:       go1.12.16
  Git commit:       369ce74a3c
  Built:            Thu Feb 13 01:26:21 2020
  OS/Arch:          linux/amd64
  Experimental:     false
 containerd:
  Version:          1.2.10
  GitCommit:        b34a5c8af56e510852c35414db4c1f4fa6172339
 runc:
  Version:          1.0.0-rc8+dev
  GitCommit:        3e425f80a8c931f88e6d94a8c831b9d5aa481657
 docker-init:
  Version:          0.18.0
  GitCommit:        fec3683

Then use the following -e argument

$ docker run -d \
    --name volumerize \
    -v /var/run/docker.sock:/var/run/docker.sock \
    ...
    ...
    -e "DOCKER_API_VERSION=1.40" \
    ...
    ...
    motionbank/volumerize

Additional Docker considerations

Warning: Make sure your container is running under the correct restart policy. Tools like Docker, Docker-Compose, Docker-Swarm, Kubernetes and Cattle may restart the container even when Volumerize stops it. Backups done under running instances may end in corrupted backups and even corrupted data. Always make sure that the command docker stop really stops an instance and there will be no restart of the underlying deployment technology. You can test this by running docker stop and check with docker ps that the container is really stopped.

Duplicity Parameters

Under the hood motionbank/volumerize uses duplicity. See here for duplicity command line options: Duplicity CLI Options

You can pass duplicity options inside Volumerize. Duplicity options will be passed by the environment-variable VOLUMERIZE_DUPLICITY_OPTIONS. The options will be added to all motionbank/volumerize commands and scripts. E.g. the option --dry-run will put the whole container in demo mode as all duplicity commands will only be simulated.

Example:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "VOLUMERIZE_DUPLICITY_OPTIONS=--dry-run" \
    motionbank/volumerize

Will only operate in dry-run simulation mode.

Symmetric Backup Encryption

You can encrypt your backups by setting a secure passphrase inside the environment variable PASSPHRASE.

Creating a secure passphrase:

$ docker run --rm motionbank/volumerize openssl rand 128 -base64

Prints an appropriate password on the console.

Example:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "PASSPHRASE=Jzwv1V83LHwtsbulVS7mMyijStBAs7Qr/V2MjuYtKg4KQVadRM" \
    motionbank/volumerize

Same functionality as described above but all backups will be encrypted.

Asymmetric Key-Based Backup Encryption

You can encrypt your backups with secure secret keys.

You need:

A key, specified by the environment-variable VOLUMERIZE_GPG_PRIVATE_KEY
A key passphrase, specified by the environment-variable PASSPHRASE

Creating a key? Install gpg on your comp and type:

$ gpg2 --full-gen-key
Please select what kind of key you want:
   (1) RSA and RSA (default)
   (2) DSA and Elgamal
   (3) DSA (sign only)
   (4) RSA (sign only)
Your selection? 1
RSA keys may be between 1024 and 4096 bits long.
What keysize do you want? (2048)
Requested keysize is 2048 bits   
Please specify how long the key should be valid.
         0 = key does not expire
      <n>  = key expires in n days
      <n>w = key expires in n weeks
      <n>m = key expires in n months
      <n>y = key expires in n years
Key is valid for? (0)
Key does not expire at all
Is this correct? (y/N) y

GnuPG needs to construct a user ID to identify your key.

Real name: YourName
Email address: yourname@youremail.com
Comment:                            
You selected this USER-ID:
    "YourName <yourname@youremail.com>"

Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O
$ gpg2 --export-secret-keys --armor yourname@youremail.com > MyKey.asc

Note: Currently, this image only supports keys without passwords. The import routine is at fault, it would always prompt for passwords.

You need to get the key id:

$ gpg -k yourname@youremail.com | head -n 2 | tail -n 1 | awk '{print $1}'

Example:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -v $(pwd)/MyKey.asc:/key/MyKey.asc \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "VOLUMERIZE_GPG_PRIVATE_KEY=/key/MyKey.asc" \
    -e GPG_KEY_ID=<MyKeyID>
    -e "PASSPHRASE=" \
    motionbank/volumerize

This will import a key without a password set.

Test the routine!

$ docker exec volumerize backup

Enforcing Full Backups Periodically

The default behavior is that the initial backup is a full backup. Afterwards, Volumerize will perform incremental backups. You can enforce another full backup periodically by specifying the environment variable VOLUMERIZE_FULL_IF_OLDER_THAN.

The format is a number followed by one of the characters s, m, h, D, W, M, or Y. (indicating seconds, minutes, hours, days, weeks, months, or years)

Examples:

After three Days: 3D
After one month: 1M
After 55 minutes: 55m

Volumerize Example:

$ docker run -d \
    --name volumerize \
    -v jenkins_volume:/source:ro \
    -v backup_volume:/backup \
    -v cache_volume:/volumerize-cache \
    -e "TZ=Europe/Berlin" \
    -e "VOLUMERIZE_SOURCE=/source" \
    -e "VOLUMERIZE_TARGET=file:///backup" \
    -e "VOLUMERIZE_FULL_IF_OLDER_THAN=7D" \
    motionbank/volumerize

Will enforce a full backup after seven days.

For the difference between a full and incremental backup, see Duplicity's documentation.

Post scripts and pre scripts (prepost strategies)

Pre-scripts must be located at /preexecute/$duplicity_action/$your_scripts_here.

Post-scripts must be located at /postexecute/$duplicity_action/$your_scripts_here.

$duplicity_action folder must be named backup, restore or verify.

Note: backup action is the same for the scripts backup, backupFull, backupIncremental and periodicBackup.

All .sh files located in the $duplicity_action folder will be executed in alphabetical order.

When using prepost strategies, this will be the execution flow: pre-scripts -> stop containers -> duplicity action -> start containers -> post-scripts.

Some premade strategies are available at prepost strategies.

Container Scripts

This image creates at container startup some convenience scripts. Under the hood motionbank/volumerize uses duplicity. To pass script parameters, see here for duplicity command line options: Duplicity CLI Options

Script	Description
backup	Creates an backup with the containers configuration
backupFull	Creates a full backup with the containers configuration
backupIncremental	Creates an incremental backup with the containers configuration
list	List all available backups
verify	Compare the latest backup to your local files
restore	Be Careful! Triggers an immediate force restore with the latest backup
periodicBackup	Same script that will be triggered by the periodic schedule
startContainers	Starts the specified Docker containers
stopContainers	Stops the specified Docker containers
remove-older-than	Delete older backups (Time formats)
cleanCacheLocks	Cleanup of old Cache locks.
prepoststrategy `$execution_phase` `$duplicity_action`	Execute all `.sh` files for the specified exeuction phase and duplicity action in alphabetical order.

$execution_phase must be preAction or postAction.

$duplicity_action must be backup, verify or restpore.

Example triggering script inside running container:

$ docker exec volumerize backup

Executes script backup inside container with name volumerize

Example passing script parameter:

$ docker exec volumerize backup --dry-run

--dry-run will simulate not execute the backup procedure.

Build The Project

Check out the project at Github.

Multiple Backups

You can specify multiple backup jobs with one container with enumerated environment variables. Each environment variable must be followed by a number starting with 1. Example VOLUMERIZE_SOURCE1, VOLUMERIZE_SOURCE2 or VOLUMERIZE_SOURCE3.

The following environment variables can be enumerated:

VOLUMERIZE_SOURCE
VOLUMERIZE_TARGET
VOLUMERIZE_CACHE
VOLUMERIZE_INCLUDE

When using multiple backup jobs you will have to specify a cache directory for each backup. The minimum required environment variables for each job is:

VOLUMERIZE_SOURCE
VOLUMERIZE_TARGET
VOLUMERIZE_CACHE

Also the included helper scripts will change their behavior when you use enumerated environment variables. By default each script will run on all backup jobs.

Example: Executing the script backup will backup all jobs.

The first parameter of each script can be a job number, e.g. 1, 2 or 3.

Example: Executing the script backup 1 will only trigger backup on job 1.

Full example for multiple job specifications:

$ docker run -d \
    --name volumerize \
    -v /var/run/docker.sock:/var/run/docker.sock \
    -v jenkins_volume:/source:ro \
    -v jenkins_volume2:/source2:ro \
    -v backup_volume:/backup \
    -v backup_volume2:/backup2 \
    -v cache_volume:/volumerize-cache \
    -v cache_volume2:/volumerize-cache2 \
    -e "VOLUMERIZE_CONTAINERS=jenkins jenkins2" \
    -e "VOLUMERIZE_SOURCE1=/source" \
    -e "VOLUMERIZE_TARGET1=file:///backup" \
    -e "VOLUMERIZE_CACHE1=/volumerize-cache" \
    -e "VOLUMERIZE_SOURCE2=/source2" \
    -e "VOLUMERIZE_TARGET2=file:///backup2" \
    -e "VOLUMERIZE_CACHE2=/volumerize-cache2" \
    motionbank/volumerize

Build the Image

$ docker build -t motionbank/volumerize .

Run the Image

$ docker run -it --rm motionbank/volumerize bash

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Blacklabelops Volumerize

Unoffical version

Volume Backups Tutorials

Make It Short

How It Works

Backup Multiple volumes

Backup Restore

Dry run

Periodic Backups

Docker Container Restarts

Additional Docker CLI API configurations

Additional Docker considerations

Duplicity Parameters

Symmetric Backup Encryption

Asymmetric Key-Based Backup Encryption

Enforcing Full Backups Periodically

Post scripts and pre scripts (prepost strategies)

Container Scripts

Build The Project

Multiple Backups

Build the Image

Run the Image

Files

README.md

Latest commit

History

README.md

File metadata and controls

Blacklabelops Volumerize

Unoffical version

Volume Backups Tutorials

Make It Short

How It Works

Backup Multiple volumes

Backup Restore

Dry run

Periodic Backups

Docker Container Restarts

Additional Docker CLI API configurations

Additional Docker considerations

Duplicity Parameters

Symmetric Backup Encryption

Asymmetric Key-Based Backup Encryption

Enforcing Full Backups Periodically

Post scripts and pre scripts (prepost strategies)

Container Scripts

Build The Project

Multiple Backups

Build the Image

Run the Image