ESP8266-01 with the last version of this library

[salvi4]

When I compile one of the first examples, the authorization as an Admin, it does compile but shows an error message in regards to its memory size (I've the ESP8266 board manager at v.2.5.0, since with another library only with this settings worked)

Does this library works on an ESP01 module?
Thanks for your help in advance

[mobizt]

It depends on the size of flash memory chip on that module.

You need to buy the ESP8266 based module with > 1 MB flash memory.

[salvi4]

Thanks for your reply. Currently I'm using an ESP01 from AZ-Delivery. It has 1MB size flash memory. Do you remember if there is one of the older versions of this library that can work with my module?
I only need to use the real-time db using the auth method, nothing more.
Thank you Sir

[mobizt]

As I posted, you need to buy device with more flash chip size i.e. 2 MB or more.

It's not depending only on the library code size, but the core sdk and its libraries also involved.

The core sdk is updated so far to v3.0.2 and this library too.

[salvi4]

I checked in Arduino IDE under Tools > Flash size: I was using the 512kb option, selecting the 1MB (the correct one) the code compiled and hasn't provided any error, later I'll check actually uploading the code on the module. Let's hope for the best.
In case it does not work, which WiFi module do you suggest? ESP32? I'll use it to serial communicate from an Arduino UNO some sensor data.
Thanks for the patience and your time

[salvi4]

Actually it does work... until it does want to Soft Reset the module, bridging via Arduino UNO, no more TX/RX serial communication on the serial monitor.
Any solution?

Only 54% space for program used. Maybe I've to update the ESP8266 Board Manager?
Thx in advance

[mobizt]

Solution for what?

I don't understand what you are trying to do.

[mobizt]

If this is not related to library directly, you should post in community forum instead.