Home

Marz Guitar Workbench Wiki

Documentation is work in progress too ;)

Parameter	Description	Example	Options
Bass	Bass Scale	647.7 mm
Treble	Treble Scale	647.7 mm

Parameter	Description	Example	Options
Thickness	thickness	5 mm
Spacing	String spacing	Equal Gap	[Equal Center], [Equal Gap]
Position	Nut align	Perpendicular to Mid Line	[Parallel to fret zero], [Perpendicular to Mid Line]
Offset	Distance from fret 0 and Nut	0 mm
Depth	Depth into the fretboard	5 mm
StringDistanceProj	Distance from first to last String at average nut position	34.5 mm

Parameter	Description	Example	Options
Joint	Joint Type	Set In	[Bolt On], [Set In], [Through All]
StartThickness	Thickness at nut position	15 mm
EndThickness	Thickness at heel transition start position	15 mm
JointFret	Number of fret where heel transition starts	16
TopOffset	Offset between body top and fretboard bottom	2 mm
Angle	Break angle	0 degrees
TenonThickness	Tenon Thickness if Set In Neck	0 mm
TenonLength	Tenon Length if Set In Neck	0 mm
TenonOffset	Tenon Offset if Set In Neck	0 mm
Profile	Neck profile	C Classic	C Classic, D Classic, V Classic, More by configuration...
TransitionLength	Length of the heel transition	50 mm
TransitionTension	Tension of the heel transition	35 mm
TransitionFunction	Math function of the heel transition	Catenary	[Catenary], [Quadratic], [Quadratic-Catenary], [Catenary-Quadratic]
HeelFillet	Heel corners fillet (radius)	1.0 mm
HeelOffset	Heel offset under the fretboard	0.0 mm

Parameter	Description	Example
Thickness	Board thickness	7 mm
StartRadius	Radius at nut	254.0 mm
EndRadius	Radius at end	355.59999999999997 mm
StartMargin	Margin before nut	5 mm
EndMargin	Margion after last fret	5 mm
SideMargin	Side margin	3 mm
FretNipping	Nipping distance	2 mm
PerpendicularFret	Number of perpendicular fret	7
Frets	Number of frets	24
InlayDepth	Depth of inlay carvings	1 mm
FilletRadius	Fillet radius for the corners of the fretboard	1.0 mm

Parameter	Description	Example
BassCompensation	Compensation on bass scale	0 mm
TrebleCompensation	Compensation on treble scale	0 mm
StringDistanceProj	String Distance at Bridge (Projected to vertical)	63 mm
Height	Height of the bridge from body's top to strings	16.363 mm

Parameter	Description	Example
Width	Default Width if no custom contour is provided	100 mm
Length	Default Length if no custom contour is provided	220 mm
Thickness	Thickness	15 mm
Depth	Depth (only apply if Flat)	5 mm
Angle	Break Angle	9 degrees
TransitionStiffness	Transition stiffness	0.5
VoluteRadius	Volute radius. If zero then no volute	50 mm
VoluteOffset	Volute offset into the neck	10 mm
TopTransitionLength	Length of the transition between nut and top of the headstock in Flat headstocks. Ignored if angle is greater than zero	20 mm

Parameter	Description	Example
Length	Total Length of trussRod	430 mm
Width	Channel width	6 mm
Depth	Channel depth	9 mm
HeadLength	Head length	20 mm
HeadWidth	Head width	8 mm
HeadDepth	Head depth	11 mm
TailLength	Tail length	0 mm
TailWidth	Tail width	0 mm
TailDepth	Tail depth	0 mm
End	Distance from neck start (nut)	0 mm

Parameter	Description	Example	Options
Gauges	Gauges of the strings in INCHES	['0.010', '0.013', '0.017', '0.026', '0.036', '0.046']

Parameter	Description	Example
TangDepth	Fret slot depth	1.397 mm
TangWidth	Fret slot width	0.508 mm
CrownHeight	Crown Height	0.9906 mm
CrownWidth	Crown Width	2.1336 mm

Parameter	Description	Example
TopThickness	Thickness of Top	5 mm
BackThickness	Thickness of Back	40 mm
Length	Max Length of Body Blank	550 mm
Width	Max Width of Body Blank	350 mm
NeckPocketCarve	Carve Neck pocket from body	True
NeckPocketDepth	Depth of Neck Pocket	20 mm
NeckPocketLength	Length of Neck Pocket	55 mm

Parameter	Description	Example
Fretboard	Toggle Fretboard autoupdate	True
Neck	Toggle Neck autoupdate	True
Body	Toggle Body autoupdate	True