Clone this repository by running the following command:
git clone --recursive https://github.com/wkhtmltopdf/wkhtmltopdf.git
If you are on Windows, make sure that you are cloning in a location without spaces/special characters in the name. In case you already have a cloned repository, update to the latest version by running the following commands:
git pull
git submodule update
Please ensure that you have enough disk space in the location you have cloned
the source code, as it will require approximately 1.2GiB for both the qt and
wkhtmltopdf repositories. Each target that is built will require an
additional 2.5GiB for compiling the source code and producing the final
installer (for Windows) or packages (for other OSes), which will be generated
in the static-build/ folder.
You can create a debug build by passing the -debug flag to the build script.
It is recommended to always pass the -clean flag, which removes the
existing build folder and performs a clean build. Note that passing -debug
may increase the disk space required for the build and final binaries for
storing the additional debug information.
Please ensure that the cloned repository is in the user's home directory
e.g. ~/wkhtmltopdf. If you clone it in a different directory, it may
fail with E: Failed to change to directory /your/dir: No such file or directory.
Building is supported only on the latest stable Debian/Ubuntu releases, and the binaries are produced in a self-contained chroot environment for the target distribution -- you will need to first setup the build environment and then only you can perform the build for a 32-bit or 64-bit binary. The following targets are currently supported:
| Target | Setup of Build Environment | Building 32-bit binaries | Building 64-bit binaries |
|---|---|---|---|
| Debian Wheezy | sudo scripts/build.py setup-schroot-wheezy |
scripts/build.py wheezy-i386 |
scripts/build.py wheezy-amd64 |
| Ubuntu Trusty | sudo scripts/build.py setup-schroot-trusty |
scripts/build.py trusty-i386 |
scripts/build.py trusty-amd64 |
| Ubuntu Precise | sudo scripts/build.py setup-schroot-precise |
scripts/build.py precise-i386 |
scripts/build.py precise-amd64 |
| CentOS 6 | sudo scripts/build.py setup-schroot-centos6 |
scripts/build.py centos6-i386 |
scripts/build.py centos6-amd64 |
| CentOS 5 | sudo scripts/build.py setup-schroot-centos5 |
scripts/build.py centos5-i386 |
scripts/build.py centos5-amd64 |
| MinGW-w64 | sudo scripts/build.py setup-mingw-w64 |
scripts/build.py mingw-w64-cross-win32 |
scripts/build.py mingw-w64-cross-win64 |
The MinGW-w64 toolchain can cross-compile 32/64-bit Windows binaries from Linux -- it is useful for targetting Windows XP/Windows 2003, which are not supported by default when compiling with MSVC 2013. You may require a working internet connection during the build to download and compile the dependent libraries (e.g. OpenSSL).
Each target will require approximately 1.5GiB of disk space to hold both
the i386 and amd64 chroot environments for that target. By default,
the chroot environments are created under /var/chroot -- in case you
want to create them under another location (e.g. due to insufficient disk
space), please run the command export WKHTMLTOX_CHROOT=/some/other/dir
before the command for setup of the build environment.
While setting up the build environments, please ensure that you are logged
in as a regular user who has sudo access. It is possible to run the script
without sudo but you will need to have root privileges (e.g. via su). In
that scenario, you may get the error Unable to determine the login for which schroot access is to be given
-- you will have to set export SUDO_USER=<username> and try to run it again.
Other than the setup of build environment, do not run any other command
with root privileges! The compilation process can be run as a normal
user and running it as root may lead to errors or complete loss of data.
After the build environment is setup, you can run the command mentioned above
to build either the 32-bit or 64-bit binaries, which should generate a
native package (either DEB or RPM, depending on the distribution) in the
static-build/ folder.
- Install Visual Studio 2008 or later (2013 Express is recommended) or follow instructions for Windows SDK 7.1
- Do "Windows Update" to ensure that VC/SDK security patches are up-to-date
- Install the latest ActivePerl release
- Install the latest Python 2.7 release
- Install NSIS 2.46
- Make sure that you can run "git". If not, add it to the PATH or reinstall with option "Run Git from the Windows Command Prompt".
| Target | Building 32-bit binaries | Building 64-bit binaries |
|---|---|---|
| MSVC 2008 | scripts\build.py msvc2008-win32 |
scripts/build.py msvc2008-win64 |
| MSVC 2010 | scripts\build.py msvc2010-win32 |
scripts/build.py msvc2010-win64 |
| MSVC 2012 | scripts\build.py msvc2012-win32 |
scripts/build.py msvc2012-win64 |
| MSVC 2013 | scripts\build.py msvc2013-win32 |
scripts/build.py msvc2013-win64 |
| Windows SDK 7.1 | scripts\build.py msvc-winsdk71-win32 |
scripts\build.py msvc-winsdk71-win64 |
During the build, a working internet connection is required to download and
compile the dependent libraries (e.g. OpenSSL). The output installers should
be generated in the static-build folder.
Please note that if you want to target Windows XP/Windows 2003 (i.e. NT 5.x) you should use the MinGW-w64 builds cross-compiled from Linux or use MSVC 2008, MSVC 2010 or Windows SDK 7.1 -- MSVC 2012 or later target Windows Vista (i.e. NT 6.x) by default.
Building is supported only on OS X 10.6 or newer. You will need to have the
latest Xcode for your OS X version. Additionally, you will need the command
sudo gem install fpm --no-ri --no-rdoc in the terminal to install
fpm, which is used for building the package.
Note that if you are using OS X 10.6, you will additionally need to install
git 1.8.4.2
and Python 2.7.6
(you may need to run the Update Shell Profile.command in /Applications/Python 2.7
to make it the default Python in the shell).
The Carbon build is recommended because it generates PDFs with smaller file sizes and selectable text as compared to the Cocoa version, see QTBUG-10094.
| Target | Build Command |
|---|---|
| 32-bit Carbon | scripts/build.py osx-carbon-i386 |
| 64-bit Cocoa | scripts/build.py osx-cocoa-x86-64 |
During the build, a working internet connection is required to download and
compile the dependent libraries (e.g. libpng and libjpeg). The output package
should be generated in the static-build folder.
In case you are running on a non-Debian/Ubuntu Linux distribution or want to
target a Linux distribution not listed above or another Unix-like OS, you
will need to use the posix-local target. It assumes that you already have
all the build dependencies installed beforehand and will generate a tarball
with the specification of local-MACHINENAME in the static-build/ folder.
If you are able to get such a build running, contacting the developers via the mailing list or submitting a patch with the build instructions would be appreciated.