tecalor-tvz170-e-plus.yaml

i2c:
  sda: 5
  scl: 4
  scan: true
  id: bus_a

gp8403:
  id: my_gp8403
  voltage: 10V

output:
  - platform: gp8403
    id: my_gp8403_output_1
    gp8403_id: my_gp8403
    channel: 0
  - platform: gp8403
    id: my_gp8403_output_2
    gp8403_id: my_gp8403
    channel: 1

switch:
  - platform: gpio
    pin:
      number: 8
    name: "Ventilation"
    inverted: true
    icon: "mdi:fan"
    restore_mode: RESTORE_DEFAULT_ON

# if you use my ESP32 CAN test PCB, you need to use the jumper array to route GPIO7 to TX LED
status_led:
  pin: GPIO7

number:
  - platform: template
    name: "Air Flow"
    id: "air_flow"
    unit_of_measurement: "m³/h"
    min_value: 50
    max_value: 295
    optimistic: true
    step: 5
    icon: "mdi:fan"
    initial_value: 111
    restore_value: true
    on_value:
      then:
        - lambda: |-
            id(my_gp8403_output_1).set_level( (x-50) / (295-50) );