diff --git a/plugins/zabbix/conf/zabbix_server.conf b/plugins/zabbix/conf/zabbix_server.conf
new file mode 100644
index 0000000000..67650ea12a
--- /dev/null
+++ b/plugins/zabbix/conf/zabbix_server.conf
@@ -0,0 +1,9 @@
+LogFile=/var/log/zabbix/zabbix_server.log
+LogFileSize=1
+PidFile=/run/zabbix/zabbix_server.pid
+SocketDir=/run/zabbix
+DBHost=127.0.0.1
+DBPort={$ZABBIX_PORT}
+DBName=zabbix
+DBUser=zabbix
+DBPassword={$ZABBIX_PASS}
diff --git a/plugins/zabbix/conf/zabbix_server.conf.bak b/plugins/zabbix/conf/zabbix_server.conf.bak
new file mode 100644
index 0000000000..6ba1a4afbf
--- /dev/null
+++ b/plugins/zabbix/conf/zabbix_server.conf.bak
@@ -0,0 +1,1130 @@
+# This is a configuration file for Zabbix server daemon
+# To get more information about Zabbix, visit https://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: ListenPort
+#	Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+#	Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogType
+#	Specifies where log messages are written to:
+#		system  - syslog
+#		file    - file specified with LogFile parameter
+#		console - standard output
+#
+# Mandatory: no
+# Default:
+# LogType=file
+
+### Option: LogFile
+#	Log file name for LogType 'file' parameter.
+#
+# Mandatory: yes, if LogType is set to file, otherwise no
+# Default:
+# LogFile=
+
+LogFile=/var/log/zabbix/zabbix_server.log
+
+### Option: LogFileSize
+#	Maximum size of log file in MB.
+#	0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
+LogFileSize=0
+
+### Option: DebugLevel
+#	Specifies debug level:
+#	0 - basic information about starting and stopping of Zabbix processes
+#	1 - critical information
+#	2 - error information
+#	3 - warnings
+#	4 - for debugging (produces lots of information)
+#	5 - extended debugging (produces even more information)
+#
+# Mandatory: no
+# Range: 0-5
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+#	Name of PID file.
+#
+# Mandatory: no
+# Default:
+# PidFile=/tmp/zabbix_server.pid
+
+PidFile=/run/zabbix/zabbix_server.pid
+
+### Option: SocketDir
+#	IPC socket directory.
+#		Directory to store IPC sockets used by internal Zabbix services.
+#
+# Mandatory: no
+# Default:
+# SocketDir=/tmp
+
+SocketDir=/run/zabbix
+
+### NOTE: Support for Oracle DB is deprecated since Zabbix 7.0 and will be removed in future versions.
+
+### Option: DBHost
+#	Database host name.
+#	If set to localhost, socket is used for MySQL.
+#	If set to empty string, socket is used for PostgreSQL.
+#	If set to empty string, the Net Service Name connection method is used to connect to Oracle database; also see
+#	the TNS_ADMIN environment variable to specify the directory where the tnsnames.ora file is located.
+#
+# Mandatory: no
+# Default:
+DBHost=127.0.0.1
+
+### Option: DBName
+#	Database name.
+#	If the Net Service Name connection method is used to connect to Oracle database, specify the service name from
+#	the tnsnames.ora file or set to empty string; also see the TWO_TASK environment variable if DBName is set to
+#	empty string.
+#
+# Mandatory: yes
+# Default:
+# DBName=
+
+DBName=zabbix
+
+### Option: DBSchema
+#	Schema name. Used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
+
+### Option: DBUser
+#	Database user.
+#
+# Mandatory: no
+# Default:
+# DBUser=
+
+DBUser=zabbix
+
+### Option: DBPassword
+#	Database password.
+#	Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+DBPassword=LGhb1f7QG6SDL5CX
+
+### Option: DBSocket
+#	Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=
+
+### Option: DBPort
+#	Database port when not using local socket.
+#	If the Net Service Name connection method is used to connect to Oracle database, the port number from the
+#	tnsnames.ora file will be used. The port number set here will be ignored.
+#
+# Mandatory: no
+# Range: 1024-65535
+# Default:
+# DBPort=
+
+### Option: AllowUnsupportedDBVersions
+#	Allow server to work with unsupported database versions.
+#       0 - do not allow
+#       1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowUnsupportedDBVersions=0
+
+### Option: HistoryStorageURL
+#	History storage HTTP[S] URL.
+#
+# Mandatory: no
+# Default:
+# HistoryStorageURL=
+
+### Option: HistoryStorageTypes
+#	Comma separated list of value types to be sent to the history storage.
+#
+# Mandatory: no
+# Default:
+# HistoryStorageTypes=uint,dbl,str,log,text
+
+### Option: HistoryStorageDateIndex
+#	Enable preprocessing of history values in history storage to store values in different indices based on date.
+#	0 - disable
+#	1 - enable
+#
+# Mandatory: no
+# Default:
+# HistoryStorageDateIndex=0
+
+### Option: ExportDir
+#	Directory for real time export of events, history and trends in newline delimited JSON format.
+#	If set, enables real time export.
+#
+# Mandatory: no
+# Default:
+# ExportDir=
+
+### Option: ExportFileSize
+#	Maximum size per export file in bytes.
+#	Only used for rotation if ExportDir is set.
+#
+# Mandatory: no
+# Range: 1M-1G
+# Default:
+# ExportFileSize=1G
+
+### Option: ExportType
+#	List of comma delimited types of real time export - allows to control export entities by their
+#	type (events, history, trends) individually.
+#	Valid only if ExportDir is set.
+#
+# Mandatory: no
+# Default:
+# ExportType=events,history,trends
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+#	Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartAgentPollers
+#	Number of pre-forked instances of asynchronous Zabbix agent pollers. Also see MaxConcurrentChecksPerPoller.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartAgentPollers=1
+
+### Option: StartHTTPAgentPollers
+#	Number of pre-forked instances of asynchronous HTTP agent pollers. Also see MaxConcurrentChecksPerPoller.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPAgentPollers=1
+
+### Option: StartSNMPPollers
+#	Number of pre-forked instances of asynchronous SNMP pollers. Also see MaxConcurrentChecksPerPoller.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartSNMPPollers=1
+
+### Option: MaxConcurrentChecksPerPoller
+#	Maximum number of asynchronous checks that can be executed at once by each HTTP agent poller or agent poller.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# MaxConcurrentChecksPerPoller=1000
+
+### Option: StartIPMIPollers
+#	Number of pre-forked instances of IPMI pollers.
+#		The IPMI manager process is automatically started when at least one IPMI poller is started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+
+### Option: StartPreprocessors
+#	Number of pre-started instances of preprocessing workers.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# StartPreprocessors=3
+
+### Option: StartConnectors
+#	Number of pre-forked instances of connector workers.
+#		The connector manager process is automatically started when connector worker is started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartConnectors=0
+
+### Option: StartPollersUnreachable
+#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+#	At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+#	are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartHistoryPollers
+#	Number of pre-forked instances of history pollers.
+#	Only required for calculated checks.
+#	A database connection is required for each history poller instance.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHistoryPollers=5
+
+### Option: StartTrappers
+#	Number of pre-forked instances of trappers.
+#	Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
+#	At least one trapper process must be running to display server availability and view queue
+#	in the frontend.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+#	Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+#	Number of pre-started instances of discovery workers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartDiscoverers=5
+
+### Option: StartHTTPPollers
+#	Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: StartTimers
+#	Number of pre-forked instances of timers.
+#	Timers process maintenance periods.
+#	Only the first timer process handles host maintenance updates. Problem suppression updates are shared
+#	between all timers.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# StartTimers=1
+
+### Option: StartEscalators
+#	Number of pre-forked instances of escalators.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartEscalators=1
+
+### Option: StartAlerters
+#	Number of pre-forked instances of alerters.
+#	Alerters send the notifications created by action operations.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartAlerters=3
+
+### Option: JavaGateway
+#	IP address (or hostname) of Zabbix Java gateway.
+#	Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+#	Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+#	Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+#	Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+#	How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwarePerfFrequency
+#	How often Zabbix will connect to VMware service to obtain performance data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwarePerfFrequency=60
+
+### Option: VMwareCacheSize
+#	Size of VMware cache, in bytes.
+#	Shared memory size for storing VMware data.
+#	Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: VMwareTimeout
+#	Specifies how many seconds vmware collector waits for response from VMware service.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# VMwareTimeout=10
+
+### Option: SNMPTrapperFile
+#	Temporary file used for passing data from SNMP trap daemon to the server.
+#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+SNMPTrapperFile=/var/log/snmptrap/snmptrap.log
+
+### Option: StartSNMPTrapper
+#	If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+#	List of comma delimited IP addresses that the trapper should listen on.
+#	Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: HousekeepingFrequency
+#	How often Zabbix will perform housekeeping procedure (in hours).
+#	Housekeeping is removing outdated information from the database.
+#	To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+#	hours of outdated information are deleted in one housekeeping cycle, for each item.
+#	To lower load on server startup housekeeping is postponed for 30 minutes after server start.
+#	With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option.
+#	In this case the period of outdated information deleted in one housekeeping cycle is 4 times the
+#	period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days.
+#
+# Mandatory: no
+# Range: 0-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: MaxHousekeeperDelete
+#	The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
+#	[housekeeperid], [tablename], [field], [value].
+#	No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
+#	will be deleted per one task in one housekeeping cycle.
+#	If set to 0 then no limit is used at all. In this case you must know what you are doing!
+#
+# Mandatory: no
+# Range: 0-1000000
+# Default:
+# MaxHousekeeperDelete=5000
+
+### Option: CacheSize
+#	Size of configuration cache, in bytes.
+#	Shared memory size for storing host, item and trigger data.
+#
+# Mandatory: no
+# Range: 128K-64G
+# Default:
+# CacheSize=32M
+
+### Option: CacheUpdateFrequency
+#	How often Zabbix will perform update of configuration cache, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# CacheUpdateFrequency=10
+
+### Option: StartDBSyncers
+#	Number of pre-forked instances of DB Syncers.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+#	Size of history cache, in bytes.
+#	Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=16M
+
+### Option: HistoryIndexCacheSize
+#	Size of history index cache, in bytes.
+#	Shared memory size for indexing history cache.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryIndexCacheSize=4M
+
+### Option: TrendCacheSize
+#	Size of trend write cache, in bytes.
+#	Shared memory size for storing trends data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# TrendCacheSize=4M
+
+### Option: TrendFunctionCacheSize
+#	Size of trend function cache, in bytes.
+#	Shared memory size for caching calculated trend function data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# TrendFunctionCacheSize=4M
+
+### Option: ValueCacheSize
+#	Size of history value cache, in bytes.
+#	Shared memory size for caching item history data requests.
+#	Setting to 0 disables value cache.
+#
+# Mandatory: no
+# Range: 0,128K-64G
+# Default:
+# ValueCacheSize=8M
+
+### Option: Timeout
+#	Specifies timeout for communications (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+Timeout=4
+
+### Option: TrapperTimeout
+#	Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+#	After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+#	How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+#	How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: AlertScriptsPath
+#	Full path to location of custom alert scripts.
+#	Default depends on compilation options.
+#	To see the default path run command "zabbix_server --help".
+#
+# Mandatory: no
+# Default:
+# AlertScriptsPath=/usr/lib/zabbix/alertscripts
+
+### Option: ExternalScripts
+#	Full path to location of external scripts.
+#	Default depends on compilation options.
+#	To see the default path run command "zabbix_server --help".
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=/usr/lib/zabbix/externalscripts
+
+### Option: FpingLocation
+#	Location of fping.
+#	Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+FpingLocation=/usr/bin/fping
+
+### Option: Fping6Location
+#	Location of fping6.
+#	Make sure that fping6 binary has root ownership and SUID flag set.
+#	Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+Fping6Location=/usr/bin/fping6
+
+### Option: SSHKeyLocation
+#	Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+#	How long a database query may take before being logged (in milliseconds).
+#	Only works if DebugLevel set to 3, 4 or 5.
+#	0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+LogSlowQueries=3000
+
+### Option: TmpDir
+#	Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: StartProxyPollers
+#	Number of pre-forked instances of pollers for passive proxies.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartProxyPollers=1
+
+### Option: ProxyConfigFrequency
+#	How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
+#	This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ProxyConfigFrequency=10
+
+### Option: ProxyDataFrequency
+#	How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
+#	This parameter is used only for proxies in the passive mode.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# ProxyDataFrequency=1
+
+### Option: StartLLDProcessors
+#	Number of pre-forked instances of low level discovery processors.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartLLDProcessors=2
+
+### Option: AllowRoot
+#	Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
+#	will try to switch to the user specified by the User configuration option instead.
+#	Has no effect if started under a regular user.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+#	Drop privileges to a specific, existing user on the system.
+#	Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+#	You may include individual files or all files in a directory in the configuration file.
+#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/usr/local/etc/zabbix_server.general.conf
+# Include=/usr/local/etc/zabbix_server.conf.d/
+# Include=/usr/local/etc/zabbix_server.conf.d/*.conf
+
+### Option: SSLCertLocation
+#	Location of SSL client certificates.
+#	This parameter is used in web monitoring and for communication with Vault.
+#	Default depends on compilation options.
+#	To see the default path run command "zabbix_server --help".
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+#	Location of private keys for SSL client certificates.
+#	This parameter is used in web monitoring and for communication with Vault.
+#	Default depends on compilation options.
+#	To see the default path run command "zabbix_server --help".
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+#	Override the location of certificate authority (CA) files for SSL server certificate verification.
+#	If not set, system-wide directory will be used.
+#	This parameter is used in web monitoring, SMTP authentication, HTTP agent items and for communication with Vault.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+### Option: StatsAllowedIP
+#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of external Zabbix instances.
+#	Stats request will be accepted only from the addresses listed here. If this parameter is not set no stats requests
+#	will be accepted.
+#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
+#	and '::/0' will allow any IPv4 or IPv6 address.
+#	'0.0.0.0/0' can be used to allow any IPv4 address.
+#	Example: StatsAllowedIP=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
+#
+# Mandatory: no
+# Default:
+# StatsAllowedIP=
+StatsAllowedIP=127.0.0.1
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+#	Full path to location of server modules.
+#	Default depends on compilation options.
+#	To see the default path run command "zabbix_server --help".
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+#	Module to load at server startup. Modules are used to extend functionality of the server.
+#	Formats:
+#		LoadModule=<module.so>
+#		LoadModule=<path/module.so>
+#		LoadModule=</abs_path/module.so>
+#	Either the module must be located in directory specified by LoadModulePath or the path must precede the module name.
+#	If the preceding path is absolute (starts with '/') then LoadModulePath is ignored.
+#	It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
+
+####### TLS-RELATED PARAMETERS #######
+
+### Option: TLSCAFile
+#	Full pathname of a file containing the top-level CA(s) certificates for
+#	peer certificate verification.
+#
+# Mandatory: no
+# Default:
+# TLSCAFile=
+
+### Option: TLSCRLFile
+#	Full pathname of a file containing revoked certificates.
+#
+# Mandatory: no
+# Default:
+# TLSCRLFile=
+
+### Option: TLSCertFile
+#	Full pathname of a file containing the server certificate or certificate chain.
+#
+# Mandatory: no
+# Default:
+# TLSCertFile=
+
+### Option: TLSKeyFile
+#	Full pathname of a file containing the server private key.
+#
+# Mandatory: no
+# Default:
+# TLSKeyFile=
+
+####### For advanced users - TLS ciphersuite selection criteria #######
+
+### Option: TLSCipherCert13
+#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
+#	Override the default ciphersuite selection criteria for certificate-based encryption.
+#
+# Mandatory: no
+# Default:
+# TLSCipherCert13=
+
+### Option: TLSCipherCert
+#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
+#	Override the default ciphersuite selection criteria for certificate-based encryption.
+#	Example for GnuTLS:
+#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
+#	Example for OpenSSL:
+#		EECDH+aRSA+AES128:RSA+aRSA+AES128
+#
+# Mandatory: no
+# Default:
+# TLSCipherCert=
+
+### Option: TLSCipherPSK13
+#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
+#	Override the default ciphersuite selection criteria for PSK-based encryption.
+#	Example:
+#		TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
+#
+# Mandatory: no
+# Default:
+# TLSCipherPSK13=
+
+### Option: TLSCipherPSK
+#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
+#	Override the default ciphersuite selection criteria for PSK-based encryption.
+#	Example for GnuTLS:
+#		NONE:+VERS-TLS1.2:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL
+#	Example for OpenSSL:
+#		kECDHEPSK+AES128:kPSK+AES128
+#
+# Mandatory: no
+# Default:
+# TLSCipherPSK=
+
+### Option: TLSCipherAll13
+#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
+#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
+#	Example:
+#		TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
+#
+# Mandatory: no
+# Default:
+# TLSCipherAll13=
+
+### Option: TLSCipherAll
+#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
+#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
+#	Example for GnuTLS:
+#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
+#	Example for OpenSSL:
+#		EECDH+aRSA+AES128:RSA+aRSA+AES128:kECDHEPSK+AES128:kPSK+AES128
+#
+# Mandatory: no
+# Default:
+# TLSCipherAll=
+
+### Option: DBTLSConnect
+#	Setting this option enforces to use TLS connection to database.
+#	required    - connect using TLS
+#	verify_ca   - connect using TLS and verify certificate
+#	verify_full - connect using TLS, verify certificate and verify that database identity specified by DBHost
+#	              matches its certificate
+#	On MySQL starting from 5.7.11 and PostgreSQL following values are supported: "required", "verify_ca" and
+#	"verify_full".
+#	On MariaDB starting from version 10.2.6 "required" and "verify_full" values are supported.
+#	Default is not to set any option and behavior depends on database configuration
+#
+# Mandatory: no
+# Default:
+# DBTLSConnect=
+
+### Option: DBTLSCAFile
+#	Full pathname of a file containing the top-level CA(s) certificates for database certificate verification.
+#	Supported only for MySQL and PostgreSQL
+#
+# Mandatory: no
+#	(yes, if DBTLSConnect set to one of: verify_ca, verify_full)
+# Default:
+# DBTLSCAFile=
+
+### Option: DBTLSCertFile
+#	Full pathname of file containing Zabbix server certificate for authenticating to database.
+#	Supported only for MySQL and PostgreSQL
+#
+# Mandatory: no
+# Default:
+# DBTLSCertFile=
+
+### Option: DBTLSKeyFile
+#	Full pathname of file containing the private key for authenticating to database.
+#	Supported only for MySQL and PostgreSQL
+#
+# Mandatory: no
+# Default:
+# DBTLSKeyFile=
+
+### Option: DBTLSCipher
+#	The list of encryption ciphers that Zabbix server permits for TLS protocols up through TLSv1.2
+#	Supported only for MySQL
+#
+# Mandatory no
+# Default:
+# DBTLSCipher=
+
+### Option: DBTLSCipher13
+#	The list of encryption ciphersuites that Zabbix server permits for TLSv1.3 protocol
+#	Supported only for MySQL, starting from version 8.0.16
+#
+# Mandatory no
+# Default:
+# DBTLSCipher13=
+
+### Option: Vault
+#	Specifies vault:
+#		HashiCorp - HashiCorp KV Secrets Engine - Version 2
+#		CyberArk  - CyberArk Central Credential Provider
+#
+# Mandatory: no
+# Default:
+# Vault=HashiCorp
+
+### Option: VaultToken
+#	Vault authentication token that should have been generated exclusively for Zabbix server with read only permission
+#	to paths specified in Vault macros and read only permission to path specified in optional VaultDBPath
+#	configuration parameter.
+#	It is an error if VaultToken and VAULT_TOKEN environment variable are defined at the same time.
+#
+# Mandatory: no
+#	(yes, if Vault is explicitly set to HashiCorp)
+# Default:
+# VaultToken=
+
+### Option: VaultURL
+#	Vault server HTTP[S] URL. System-wide CA certificates directory will be used if SSLCALocation is not specified.
+#
+# Mandatory: no
+# Default:
+# VaultURL=https://127.0.0.1:8200
+
+### Option: VaultPrefix
+#	Custom prefix for Vault path or query depending on the Vault.
+#	Most suitable defaults will be used if not specified. 
+#	Note that 'data' is automatically appended after mountpoint for HashiCorp if VaultPrefix is not specified.
+#	Example prefix for HashiCorp:
+#		/v1/secret/data/
+#	Example prefix for CyberArk:
+#		/AIMWebService/api/Accounts?
+# Mandatory: no
+# Default:
+# VaultPrefix=
+
+### Option: VaultDBPath
+#	Vault path or query depending on the Vault from where credentials for database will be retrieved by keys.
+#	Keys used for HashiCorp are 'password' and 'username'.
+#	Example path:
+#		secret/zabbix/database
+#	Keys used for CyberArk are 'Content' and 'UserName'.
+#	Example query:
+#		AppID=zabbix_server&Query=Safe=passwordSafe;Object=zabbix_server_database
+#	This option can only be used if DBUser and DBPassword are not specified.
+#
+# Mandatory: no
+# Default:
+# VaultDBPath=
+
+### Option: VaultTLSCertFile
+#	Name of the SSL certificate file used for client authentication. The certificate file must be in PEM1 format.
+#	If the certificate file contains also the private key, leave the SSL key file field empty. The directory
+#	containing this file is specified by configuration parameter SSLCertLocation.
+#
+# Mandatory: no
+# Default:
+# VaultTLSCertFile=
+
+### Option: VaultTLSKeyFile
+#	Name of the SSL private key file used for client authentication. The private key file must be in PEM1 format.
+#	The directory containing this file is specified by configuration parameter SSLKeyLocation.
+#
+# Mandatory: no
+# Default:
+# VaultTLSKeyFile=
+
+### Option: StartReportWriters
+#	Number of pre-forked report writer instances.
+#
+# Mandatory: no
+# Range: 0-100
+# Default:
+# StartReportWriters=0
+
+### Option: WebServiceURL
+#	URL to Zabbix web service, used to perform web related tasks.
+#	Example: http://localhost:10053/report
+#
+# Mandatory: no
+# Default:
+# WebServiceURL=
+
+### Option: ServiceManagerSyncFrequency
+#	How often Zabbix will synchronize configuration of a service manager (in seconds).
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# ServiceManagerSyncFrequency=60
+
+### Option: ProblemHousekeepingFrequency
+#	How often Zabbix will delete problems for deleted triggers (in seconds).
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# ProblemHousekeepingFrequency=60
+
+## Option: StartODBCPollers
+#	Number of pre-forked ODBC poller instances.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartODBCPollers=1
+
+### Option: EnableGlobalScripts
+#    Enable global scripts on Zabbix server.
+#       0 - disable
+#       1 - enable
+#
+# Mandatory: no
+# Default:
+# EnableGlobalScripts=1
+EnableGlobalScripts=0
+
+# Option: AllowSoftwareUpdateCheck
+#       Allow Zabbix UI to receive information about software updates from zabbix.com 
+#       0 - disable software update checks
+#       1 - enable software update checks
+#
+# Mandatory: no
+# Default:
+# AllowSoftwareUpdateCheck=1
+
+### Option: SMSDevices
+#	List of comma delimited modem files allowed to use Zabbix server
+#       SMS sending not possible if this parameter is not set
+#	Example: SMSDevices=/dev/ttyUSB0,/dev/ttyUSB1
+#
+# Mandatory: no
+# Default:
+# SMSDevices=
+
+####### For advanced users - TCP-related fine-tuning parameters #######
+
+## Option: ListenBacklog
+#       The maximum number of pending connections in the queue. This parameter is passed to
+#       listen() function as argument 'backlog' (see "man listen").
+#
+# Mandatory: no
+# Range: 0 - INT_MAX (depends on system, too large values may be silently truncated to implementation-specified maximum)
+# Default: SOMAXCONN (hard-coded constant, depends on system)
+# ListenBacklog=
+
+
+####### High availability cluster parameters #######
+
+## Option: HANodeName
+#	The high availability cluster node name.
+#	When empty, server is working in standalone mode; a node with empty name is registered with address for the frontend to connect to.
+#
+# Mandatory: no
+# Default:
+# HANodeName=
+
+## Option: NodeAddress
+#	IP or hostname with optional port to specify how frontend should connect to the server.
+#	Format: <address>[:<port>]
+#
+#	If IP or hostname is not set, then ListenIP value will be used. In case ListenIP is not set, localhost will be used.
+#	If port is not set, then ListenPort value will be used. In case ListenPort is not set, 10051 will be used.
+#	This option can be overridden by address specified in frontend configuration.
+#
+# Mandatory: no
+# Default:
+# NodeAddress=localhost:10051
+
+####### Browser monitoring #######
+
+### Option: WebDriverURL
+#	WebDriver interface HTTP[S] URL. For example http://localhost:4444 used with Selenium WebDriver standalone server.
+#
+# Mandatory: no
+# Default:
+# WebDriverURL=
+
+### Option: StartBrowserPollers
+#	Number of pre-forked instances of browser item pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartBrowserPollers=1
diff --git a/plugins/zabbix/index.py b/plugins/zabbix/index.py
index df0ea566ef..1ce3f30021 100755
--- a/plugins/zabbix/index.py
+++ b/plugins/zabbix/index.py
@@ -195,7 +195,7 @@ def zabbixImportMySQLData():
 
     return True
 
-def initDreplace():
+def initOpConf():
     nginx_src_tpl = getPluginDir()+'/conf/zabbix.nginx.conf'
     nginx_dst_vhost = zabbixNginxConf()
 
@@ -204,8 +204,24 @@ def initDreplace():
         content = mw.readFile(nginx_src_tpl)
         content = contentReplace(content)
         mw.writeFile(nginx_dst_vhost, content)
+
+def initZsConf():
+    zs_src_tpl = getPluginDir()+'/conf/zabbix_server.conf'
+    zs_dst_path = zabbixServerConf()
+
+    # nginx配置
+    content = mw.readFile(zs_src_tpl)
+    content = content.replace('{$ZABBIX_PORT}', getMySQLPort())
+    content = content.replace('{$ZABBIX_PASS}', db_pass)
+    mw.writeFile(zs_dst_path, content)
+
+def initDreplace():
+    # 初始化OP配置
+    initOpConf()
     # 导入MySQL配置
     zabbixImportMySQLData()
+
+    initZsConf()
     return True