WIASane don't want to install on Windows Vista

[Arno500]

The driver doesn't install on Windows Vista. I don't know if it is just the installer or the driver but I receive a message saying that this OS is incompatible. I've tested the first version and it's the same.

[mback2k]

Could you please provide a screenshot of the error message? Thanks in advance.

[Arno500]

Hum, sorry I can't do it (I'm in vacations), but I perfectly remember than
the only message was a classical message: "Your operating system is not
supported by this software."

[mback2k]

Okay, did it came directly from the installer or later during the device setup in a separate window? Have a nice vacation and holidays!

[Arno500]

Thank you very much!
No, it was directly in the installer, I think it can work if the minimal OS
is corrected.
Le 26 déc. 2014 22:44, "Marc Hörsken" [email protected] a écrit :

Okay, did it came directly from the installer or later during the device
setup in a separate window? Have a nice vacation and holidays!

—
Reply to this email directly or view it on GitHub
#18 (comment).

[mback2k]

Please try to install the following version once you are back home: wiasane-v0.1.1.9-23-g9f92ebf.exe

[Arno500]

Oki !!!
Beside that, awesome software. But it is quite slow to start operations
(SANE ?).
Le 27 déc. 2014 14:06, "Marc Hörsken" [email protected] a écrit :

Please try to install the following version once you are back home:
wiasane-v0.1.1.9-23-g9f92ebf.exe
https://wiasane.marc-hoersken.de/download/release/v0.1.1.9-23-g9f92ebf/wiasane-v0.1.1.9-23-g9f92ebf.exe

—
Reply to this email directly or view it on GitHub
#18 (comment).

[Arno500]

It doesn't work:
Stuck at "Trying to initialize a session with the following SANE server: XXXX:6566" (X's are my personnal server) and the Hard drive is working but I can leave it for 1 hour, the same state.

[mback2k]

I assume that "server:6566" is just an example value, right? You have to use the actual servers hostname or IP address and the corret SANE port to setup the connection.
What do you mean with the hard drive is working? You can also try to install the following debug version and catch some debug output with DbgView: wiasane-v0.1.1.9-25-g400d726-dbg.exe

[Arno500]

I will try it.
Server:6566 is a real server (the IP is in the host file ;).
The hard drive is working: the disk drive indicator of the motherboard is
flashing quickly (like 10 times/second it is difficult to measure that).
Le 29 déc. 2014 19:22, "Marc Hörsken" [email protected] a écrit :

I assume that "server:6566" is just an example value, right? You have to
use the actual servers hostname or IP address and the corret SANE port to
setup the connection.
What do you mean with the hard drive is working? You can also try to
install the following debug version and catch some debug output with
DbgView: wiasane-v0.1.1.9-25-g400d726-dbg.exe

—
Reply to this email directly or view it on GitHub.

[hoffleit]

I'm facing the same problem as Arno500:

I'm running Vista 32bit on the SANE-client-to-be. Both wiasane-v0.1.1.9-23-g9f92ebf.exe and wiasane-v0.1.1.9-25-g400d726-dbg.exe install (the regular wiasane download does not), but during driver installation, the step "Trying to initialize the session ..." hangs forever.

When I run the saned on the server in standalone mode with debug output, saned indeed show traffic from the client:

# SANE_DEBUG_HP5590=255 SANE_DEBUG_NET=255 saned -d 255 -a saned
[saned] check_host: access by remote host: ::ffff:192.168.1.100
[saned] init: access granted to admin@::ffff:192.168.1.100
[sanei_debug] Setting debug level of hp5590 to 255.
[hp5590] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.7
[hp5590] (c) Ilia Sotnikov <[email protected]>
[hp5590] attach_usb_device: Opening USB device
[hp5590] attach_usb_device: USB device opened
[hp5590] hp5590_init_scanner
[hp5590] hp5590_cmd: USB-in-USB: command : 0012
[hp5590] hp5590_control_msg: USB-in-USB: core data: no
[hp5590] hp5590_control_msg: USB-in-USB: sending control msg
...
[hp5590] sane_hp5590_get_devices, local only: 1
[hp5590] Found 1 devices
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited
#

But that's it. Nothing else happens from there on (even if I restart saned, or if I run saned in inetd mode).

I ran DebugView on the Vista client with wiasane-v0.1.1.9-23-g9f92ebf.exe, but it doesn't show anything interesting, only window initialization stuff AFAICS.

By the way, the initialization fails instantly with an error "Scanner session connect failed" when saned is not running or when I enter a non-existant IP or port.

This is the output of DebugView failing to connect. I guess the WM_NOTIFY events are the keypresses during me replace "localhost" with the IP of the server, and then nothing interesting at all is to be seen.

Any idea?

00000001    0.00000000  [6272] devsane: DeviceInstall(wiasane.inf, 1)   
00000002    0.09211988  [6272] devsane: DsInfPath: C:\Windows\System32\DriverStore\FileRepository\wiasane.inf_ff3f548c\wiasane.inf  
00000003    0.09484068  [6272] devsane: ClassName: Image    
00000004    0.09766821  [6272] devsane: HardwareID: ROOT\IMAGE\0015 (16)    
00000005    0.09780125  [6272] devsane: HardwareIDs: Image_Network_WIASANE  
00000006    0.09780125  [6272] ROOT\IMAGE\0015  
00000007    0.09780125  [6272]  (76)    
00000008    4.96653605  [6272] coisane: DIF_SELECTBESTCOMPATDRV     
00000009    5.05878687  [6272] coisane: DIF_NEWDEVICEWIZARD_FINISHINSTALL   
00000010    5.05890560  [6272] coisane: PSPCB_ADDREF    
00000011    5.05896187  [6272] coisane: PSPCB_ADDREF    
00000012    5.05899954  [6272] coisane: PSPCB_ADDREF    
00000013    5.05902719  [6272] coisane: PSPCB_ADDREF    
00000014    5.09235001  [6272] coisane: PSPCB_RELEASE   
00000015    5.09238768  [6272] coisane: PSPCB_RELEASE   
00000016    5.09242535  [6272] coisane: PSPCB_RELEASE   
00000017    5.09246302  [6272] coisane: PSPCB_RELEASE   
00000018    5.12212324  [6272] coisane: DIF_SELECTBESTCOMPATDRV     
00000019    5.27031612  [6272] coisane: DIF_NEWDEVICEWIZARD_FINISHINSTALL   
00000020    5.27036810  [6272] coisane: PSPCB_ADDREF    
00000021    5.27040958  [6272] coisane: PSPCB_ADDREF    
00000022    5.27045155  [6272] coisane: PSPCB_ADDREF    
00000023    5.27050352  [6272] coisane: PSPCB_ADDREF    
00000024    5.30330420  [6272] coisane: PSPCB_CREATE    
00000025    5.30551243  [6272] coisane: WM_INITDIALOG   
00000026    5.31416082  [6272] coisane: WM_NOTIFY   
00000027    5.31418324  [6272] coisane: PSN_SETACTIVE   
00000028    5.31941557  [6272] coisane: WM_NOTIFY   
00000029    7.68333530  [6272] coisane: WM_NOTIFY   
00000030    7.68341112  [6272] coisane: WM_NOTIFY   
00000031    7.77083778  [6272] coisane: WM_NOTIFY   
00000032    7.91666555  [6272] coisane: WM_NOTIFY   
00000033    7.91679955  [6272] coisane: WM_NOTIFY   
00000034    7.99627113  [6272] coisane: WM_NOTIFY   
00000035    8.09602165  [6272] coisane: WM_NOTIFY   
00000036    8.09621906  [6272] coisane: WM_NOTIFY   
00000037    8.17559052  [6272] coisane: WM_NOTIFY   
00000038    8.27263260  [6272] coisane: WM_NOTIFY   
00000039    8.27320099  [6272] coisane: WM_NOTIFY   
00000040    8.36865711  [6272] coisane: WM_NOTIFY   
00000041    8.47539425  [6272] coisane: WM_NOTIFY   
00000042    8.47554874  [6272] coisane: WM_NOTIFY   
00000043    8.55484772  [6272] coisane: WM_NOTIFY   
00000044    8.76226044  [6272] coisane: WM_NOTIFY   
00000045    8.76233196  [6272] coisane: WM_NOTIFY   
00000046    8.76289940  [6272] coisane: WM_NOTIFY   
00000047    8.76295471  [6272] coisane: WM_NOTIFY   
00000048    8.83258438  [6272] coisane: WM_NOTIFY   
00000049    8.83737278  [6272] coisane: WM_NOTIFY   
00000050    9.35350037  [6272] coisane: WM_NOTIFY   
00000051    9.36478233  [6272] coisane: WM_NOTIFY   
00000052    9.44869518  [6272] coisane: WM_NOTIFY   
00000053    9.66157436  [6272] coisane: WM_NOTIFY   
00000054    9.66169739  [6272] coisane: WM_NOTIFY   
00000055    9.73293209  [6272] coisane: WM_NOTIFY   
00000056    10.16411877 [6272] coisane: WM_NOTIFY   
00000057    10.16424274 [6272] coisane: WM_NOTIFY   
00000058    10.25989914 [6272] coisane: WM_NOTIFY   
00000059    10.83894920 [6272] coisane: WM_NOTIFY   
00000060    10.83907890 [6272] coisane: WM_NOTIFY   
00000061    10.94305897 [6272] coisane: WM_NOTIFY   
00000062    11.18194294 [6272] coisane: WM_NOTIFY   
00000063    11.18208694 [6272] coisane: WM_NOTIFY   
00000064    11.26079178 [6272] coisane: WM_NOTIFY   
00000065    11.41194916 [6272] coisane: WM_NOTIFY   
00000066    11.41207504 [6272] coisane: WM_NOTIFY   
00000067    11.48385620 [6272] coisane: WM_NOTIFY   
00000068    11.58805752 [6272] coisane: WM_NOTIFY   
00000069    11.58817863 [6272] coisane: WM_NOTIFY   
00000070    11.70741940 [6272] coisane: WM_NOTIFY   
00000071    15.93506527 [6272] coisane: WM_NOTIFY   
00000072    15.93520546 [6272] coisane: WM_NOTIFY   
00000073    16.02253532 [6272] coisane: WM_NOTIFY   
00000074    17.49163246 [6272] coisane: WM_NOTIFY   
00000075    17.49172974 [6272] coisane: PSN_WIZNEXT     
00000076    17.49202728 [6272] coisane: WM_NOTIFY   
00000077    17.49210739 [6272] coisane: PSN_KILLACTIVE  
00000078    17.49243736 [6272] coisane: PSPCB_CREATE    
00000079    17.49413300 [6272] coisane: WM_INITDIALOG   
00000080    17.49703026 [6272] coisane: WM_NOTIFY   
00000081    17.49711609 [6272] coisane: PSN_SETACTIVE   
00000082    17.50154114 [6272] coisane: WM_NOTIFY   

[strooph]

Hello,
is there a solution, I am on vista 32 and experience the same probleme
saned -d 128 gave me that
[saned] init: access granted
[saned] init: access granted to [email protected]
[saned] process_request: waiting for request
[saned] process_request: got request 1
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited