Skip to content

Latest commit

 

History

History
163 lines (128 loc) · 7.03 KB

README.md

File metadata and controls

163 lines (128 loc) · 7.03 KB

zramd

Automatically setup swap on zram ✨

Why swap on zram?

  • Significantly improves system responsiveness, especially when swap is under pressure.
  • More secure, user data leaks into swap are on volatile media.
  • Without swap-on-drive, there's better utilization of a limited resource: benefit of swap without the drive space consumption.
  • Further reduces the time to out-of-memory kill, when workloads exceed limits.

See also https://fedoraproject.org/wiki/Changes/SwapOnZRAM#Benefit_to_Fedora

Installation

Install on Arch Linux from the AUR

  • Install the zramd package form the AUR.
  • Enable and start the service:
    sudo systemctl enable --now zramd

Install on Ubuntu / Debian / Raspberry Pi OS

  • Head to the releases section and download the .deb file corresponding to your system architecture
  • Install using sudo dpkg -i DEB_FILE

Manual installation on any distribution without systemd

  • Head to the releases section and download the .tar.gz file corresponding to your system architecture
  • Extract the downloaded file e.g. tar xf TAR_FILE
  • Copy the zramd binary to /usr/local/bin.
  • There are various ways to setup autostart depending on your init system, for example you can add a line to /etc/rc.local e.g.
    /usr/local/bin/zramd start

Usage

  • zramd --help

    Usage: zramd <command> [<args>]
    
    Options:
      --help, -h             display this help and exit
      --version              display version and exit
    
    Commands:
      start                  load zram module and setup swap devices
      stop                   stop swap devices and unload zram module
    
  • zramd start --help

    Usage: zramd start [--algorithm ALGORITHM] [--fraction FRACTION] [--max-size MAX_SIZE] [--num-devices NUM_DEVICES] [--priority PRIORITY] [--skip-vm]
    
    Options:
      --algorithm ALGORITHM, -a ALGORITHM
                             zram compression algorithm
                             [default: zstd, env: ALGORITHM]
      --fraction FRACTION, -f FRACTION
                             maximum percentage of RAM allowed to use
                             [default: 1.0, env: FRACTION]
      --max-size MAX_SIZE, -m MAX_SIZE
                             maximum total MB of swap to allocate
                             [default: 8192, env: MAX_SIZE]
      --num-devices NUM_DEVICES, -n NUM_DEVICES
                             maximum number of zram devices to create
                             [default: 1, env: NUM_DEVICES]
      --priority PRIORITY, -p PRIORITY
                             swap priority
                             [default: 100, env: PRIORITY]
      --skip-vm, -s          skip initialization if running on a VM
                             [default: false, env: SKIP_VM]
      --help, -h             display this help and exit
      --version              display version and exit
    

Compilation

With Docker

  • Choose a valid git tag and run the make docker command e.g.
    # This command will create builds (.tar.gz and .deb) for all supported architectures
    CURRENT_TAG=v0.8.5 make docker

Manual Compilation

  • Install go (at least version 1.16), the command may be different depending on the distribution:
    # ArchLinux
    sudo pacman -S go
    
    # Ubuntu
    sudo apt-get install golang
  • You can run make to create a build with the same architecture as the current system:
    # If you cloned this repository you can just run make
    make
    
    # To create a Raspberry Pi build you need to specify the arch e.g.
    GOOS=linux GOARCH=arm GOARM=7 make
    
    # If you downloaded a .tar.gz or .zip (instead of cloning this repo) you need to specify additional info
    CURRENT_DATE=$(date --iso-8601=seconds) VERSION=Unknown make
    
    # So, to target the Raspberry Pi (without a repo) the command would look like
    CURRENT_DATE=$(date --iso-8601=seconds) VERSION=Unknown GOOS=linux GOARCH=arm GOARM=7 make
  • A new executable called zramd.bin will be created under the dist/ directory, now you can uninstall go if you like.

Configuration

With systemd

  • The default configuration file is located at /etc/default/zramd, just edit the variables as you like and restart the zramd service i.e. sudo systemctl restart zramd

Without systemd

  • Just change the arguments as you like, e.g. zramd start --max-size 1024 or zramd start --fraction 0.5 --priority 0

Troubleshooting

  • modprobe: FATAL: Module zram not found in directory /lib/modules/...
    It can happen if you try to start the zramd service after a kernel upgrade, you just need to restart your computer.
  • error: swapon: /dev/zramX: swapon failed: Operation not permitted
    First make sure that you are running as root (or at least that you have the required capabilities), also keep in mind that Linux only supports up to 32 swap devices (although it can start throwing the error from above when using a high value like 24).

Notes

  • Avoid using other zram-related packages along this one, zramd loads and unloads the zram kernel module assuming that the system is not using zram for other stuff (like mounting /tmp over zram).
  • Do not use zswap with zram, it would unnecessarily cause data to be compressed and decompressed back and forth.
  • When dealing with virtual machines, zram should be used on the host OS so guest memory can be compressed transparently, see also comments on original zram implementation.
    • If you boot the same system on a real computer as well as on a virtual machine, you can use the --skip-vm parameter to avoid initialization when running inside a virtual machine.
  • For best results install systemd-oomd or earlyoom (they may not be available on all distributions).
  • You can use swapon -show or zramctl to see all swap devices currently in use, this is useful if you want to confirm that all of the zram devices were setup correctly.
  • To quickly fill the memory, you can use tail /dev/zero but keep in mind that your system may become unresponsive if you do not have an application like earlyoom to kill tail just before it reaches the memory limit.
  • To test some zramd commands under the same conditions as the systemd unit you can use systemd-run e.g.
    sudo systemd-run -t \
      -p ProtectHostname=yes \
      -p PrivateNetwork=yes \
      -p IPAddressDeny=any \
      -p NoNewPrivileges=yes \
      -p RestrictNamespaces=yes \
      -p RestrictRealtime=yes \
      -p RestrictSUIDSGID=yes \
      -p MemoryDenyWriteExecute=yes \
      -p LockPersonality=yes \
      -p 'CapabilityBoundingSet=CAP_SYS_ADMIN CAP_SYS_MODULE' \
      -p 'SystemCallFilter=@module @swap @system-service' \
      -p SystemCallArchitectures=native \
      -p SystemCallErrorNumber=EPERM \
      -p 'DeviceAllow=block-* rw' \
      -p DevicePolicy=closed \
      -p RestrictAddressFamilies=AF_UNIX \
      -p RestrictAddressFamilies=~AF_UNIX \
      /usr/bin/zramd --version