README.md

fhem-pilight

Usage

Define

define <name> pilight <protocol>

Defines a module for setting pilight compartible switches on or off. See Sweetpi.

Supported protocols: kaku_switch, quigg_switch, elro_he, elro_hc, silvercrest, pollin, mumbi, and intertechno_old. If you need more, just write an issue!

Example:
define Weihnachtsbaum pilight kaku_switch
attr Weihnachtsbaum housecode 12323578
attr Weihnachtsbaum unitcode 0


If your pilight server does not run on localhost, please set both the attributes remote_ip and remote_port. If you are running pilight >3.0, then please define the port used by pilight settings: http://www.pilight.org/getting-started/settings/; fhem-plight uses 5000 by default.
This version is written for pilight 5.0. If you run a version < 3.0, please set the following attribute: attr Weihnachtsbaum useOldVersion 1

Attributes

• attr <name> protocol <string>
  Protocol used in pilight, e.g. "kaku_switch"
• attr <name> housecode <string>
  Housecode used in pilight (for protocol kaku* and quigg_switch)
• attr <name> unitcode <string>
  Unit code/device code used in pilight (for protocol kaku*, quigg_switch, elso, elro_he, elro_hc, silvercrest, pollin, intertechno_old)
• attr <name> systemcode <string>
  Systemcode of your switch (for protocol elso, elro_he, elro_hc, silvercrest, pollin, intertechno_old)
• attr <name> remote_ip <string>
  Remote IP of you pilight server (127.0.0.1 is default)
• attr <name> remote_port <string>
  Remote port of you pilight server (5000 is default)

You can find more information on my website