diff --git a/OrcaSlicer/Snapmaker/Snapmaker.json b/OrcaSlicer/Snapmaker/Snapmaker.json
deleted file mode 100644
index d61984b..0000000
--- a/OrcaSlicer/Snapmaker/Snapmaker.json
+++ /dev/null
@@ -1,806 +0,0 @@
-{
-  "name": "Snapmaker",
-  "version": "01.06.01",
-  "force_update": "0",
-  "description": "Snapmaker configurations",
-  "machine_model_list": [
-    {
-      "name": "Snapmaker J1",
-      "sub_path": "machine/Snapmaker J1.json"
-    },
-    {
-      "name": "Snapmaker A250",
-      "sub_path": "machine/Snapmaker A250.json"
-    },
-    {
-      "name": "Snapmaker A350",
-      "sub_path": "machine/Snapmaker A350.json"
-    },
-    {
-      "name": "Snapmaker A250 Dual",
-      "sub_path": "machine/Snapmaker A250 Dual.json"
-    },
-    {
-      "name": "Snapmaker A350 Dual",
-      "sub_path": "machine/Snapmaker A350 Dual.json"
-    },
-    {
-      "name": "Snapmaker A250 QSKit",
-      "sub_path": "machine/Snapmaker A250 QSKit.json"
-    },
-    {
-      "name": "Snapmaker A350 QSKit",
-      "sub_path": "machine/Snapmaker A350 QSKit.json"
-    },
-    {
-      "name": "Snapmaker A250 Dual QSKit",
-      "sub_path": "machine/Snapmaker A250 Dual QSKit.json"
-    },
-    {
-      "name": "Snapmaker A350 Dual QSKit",
-      "sub_path": "machine/Snapmaker A350 Dual QSKit.json"
-    }
-  ],
-  "process_list": [
-    {
-      "name": "fdm_process_common",
-      "sub_path": "process/fdm_process_common.json"
-    },
-    {
-      "name": "fdm_process_idex",
-      "sub_path": "process/fdm_process_idex.json"
-    },
-    {
-      "name": "0.06 Standard @Snapmaker (0.2 nozzle)",
-      "sub_path": "process/0.06 Standard @Snapmaker (0.2 nozzle).json"
-    },
-    {
-      "name": "0.06 Standard @Snapmaker J1 (0.2 nozzle)",
-      "sub_path": "process/0.06 Standard @Snapmaker J1 (0.2 nozzle).json"
-    },
-    {
-      "name": "0.08 Extra Fine @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.08 Extra Fine @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.08 Extra Fine @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.08 Extra Fine @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.10 Standard @Snapmaker (0.2 nozzle)",
-      "sub_path": "process/0.10 Standard @Snapmaker (0.2 nozzle).json"
-    },
-    {
-      "name": "0.10 Standard @Snapmaker J1 (0.2 nozzle)",
-      "sub_path": "process/0.10 Standard @Snapmaker J1 (0.2 nozzle).json"
-    },
-    {
-      "name": "0.12 Fine @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.12 Fine @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.12 Fine @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.12 Fine @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.14 Standard @Snapmaker (0.2 nozzle)",
-      "sub_path": "process/0.14 Standard @Snapmaker (0.2 nozzle).json"
-    },
-    {
-      "name": "0.14 Standard @Snapmaker J1 (0.2 nozzle)",
-      "sub_path": "process/0.14 Standard @Snapmaker J1 (0.2 nozzle).json"
-    },
-    {
-      "name": "0.16 Optimal @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.16 Optimal @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.16 Optimal @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.16 Optimal @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.18 Standard @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.18 Standard @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.18 Standard @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.18 Standard @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.20 Standard @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.20 Standard @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.20 Standard @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.20 Standard @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.20 Strength @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.20 Strength @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.20 Strength @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.20 Strength @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.24 Draft @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.24 Draft @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.24 Draft @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.24 Draft @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.25 Benchy @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.25 Benchy @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.24 Standard @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.24 Standard @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.24 Standard @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.24 Standard @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.24 Standard @Snapmaker (0.8 nozzle)",
-      "sub_path": "process/0.24 Standard @Snapmaker (0.8 nozzle).json"
-    },
-    {
-      "name": "0.24 Standard @Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "process/0.24 Standard @Snapmaker J1 (0.8 nozzle).json"
-    },
-    {
-      "name": "0.28 Extra Draft @Snapmaker (0.4 nozzle)",
-      "sub_path": "process/0.28 Extra Draft @Snapmaker (0.4 nozzle).json"
-    },
-    {
-      "name": "0.28 Extra Draft @Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "process/0.28 Extra Draft @Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "0.30 Standard @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.30 Standard @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.30 Standard @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.30 Standard @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.30 Strength @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.30 Strength @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.30 Strength @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.30 Strength @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.32 Standard @Snapmaker (0.8 nozzle)",
-      "sub_path": "process/0.32 Standard @Snapmaker (0.8 nozzle).json"
-    },
-    {
-      "name": "0.32 Standard @Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "process/0.32 Standard @Snapmaker J1 (0.8 nozzle).json"
-    },
-    {
-      "name": "0.34 Standard @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.34 Standard @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.34 Standard @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.34 Standard @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.36 Standard @Snapmaker (0.8 nozzle)",
-      "sub_path": "process/0.36 Standard @Snapmaker (0.8 nozzle).json"
-    },
-    {
-      "name": "0.36 Standard @Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "process/0.36 Standard @Snapmaker J1 (0.8 nozzle).json"
-    },
-    {
-      "name": "0.38 Standard @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.38 Standard @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.38 Standard @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.38 Standard @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.40 Standard @Snapmaker (0.8 nozzle)",
-      "sub_path": "process/0.40 Standard @Snapmaker (0.8 nozzle).json"
-    },
-    {
-      "name": "0.40 Standard @Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "process/0.40 Standard @Snapmaker J1 (0.8 nozzle).json"
-    },
-    {
-      "name": "0.42 Draft @Snapmaker (0.6 nozzle)",
-      "sub_path": "process/0.42 Draft @Snapmaker (0.6 nozzle).json"
-    },
-    {
-      "name": "0.42 Draft @Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "process/0.42 Draft @Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "0.48 Draft @Snapmaker (0.8 nozzle)",
-      "sub_path": "process/0.48 Draft @Snapmaker (0.8 nozzle).json"
-    },
-    {
-      "name": "0.48 Draft @Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "process/0.48 Draft @Snapmaker J1 (0.8 nozzle).json"
-    }
-  ],
-  "filament_list": [
-    {
-      "name": "fdm_filament_common",
-      "sub_path": "filament/fdm_filament_common.json"
-    },
-    {
-      "name": "fdm_filament_abs",
-      "sub_path": "filament/fdm_filament_abs.json"
-    },
-    {
-      "name": "fdm_filament_asa",
-      "sub_path": "filament/fdm_filament_asa.json"
-    },
-    {
-      "name": "fdm_filament_pa",
-      "sub_path": "filament/fdm_filament_pa.json"
-    },
-    {
-      "name": "fdm_filament_petg",
-      "sub_path": "filament/fdm_filament_petg.json"
-    },
-    {
-      "name": "fdm_filament_pet",
-      "sub_path": "filament/fdm_filament_pet.json"
-    },
-    {
-      "name": "fdm_filament_pla",
-      "sub_path": "filament/fdm_filament_pla.json"
-    },
-    {
-      "name": "fdm_filament_pla_eco",
-      "sub_path": "filament/fdm_filament_pla_eco.json"
-    },
-    {
-      "name": "fdm_filament_pva",
-      "sub_path": "filament/fdm_filament_pva.json"
-    },
-    {
-      "name": "fdm_filament_tpu",
-      "sub_path": "filament/fdm_filament_tpu.json"
-    },
-    {
-      "name": "Snapmaker ABS @base",
-      "sub_path": "filament/Snapmaker ABS @base.json"
-    },
-    {
-      "name": "Snapmaker ABS",
-      "sub_path": "filament/Snapmaker ABS.json"
-    },
-    {
-      "name": "Snapmaker ABS @0.2 nozzle",
-      "sub_path": "filament/Snapmaker ABS @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker ASA @base",
-      "sub_path": "filament/Snapmaker ASA @base.json"
-    },
-    {
-      "name": "Snapmaker ASA",
-      "sub_path": "filament/Snapmaker ASA.json"
-    },
-    {
-      "name": "Snapmaker ASA @0.2 nozzle",
-      "sub_path": "filament/Snapmaker ASA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker PA-CF @base",
-      "sub_path": "filament/Snapmaker PA-CF @base.json"
-    },
-    {
-      "name": "Snapmaker PA-CF",
-      "sub_path": "filament/Snapmaker PA-CF.json"
-    },
-    {
-      "name": "Snapmaker PETG @base",
-      "sub_path": "filament/Snapmaker PETG @base.json"
-    },
-    {
-      "name": "Snapmaker PETG",
-      "sub_path": "filament/Snapmaker PETG.json"
-    },
-    {
-      "name": "Snapmaker PETG @0.2 nozzle",
-      "sub_path": "filament/Snapmaker PETG @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker PET @base",
-      "sub_path": "filament/Snapmaker PET @base.json"
-    },
-    {
-      "name": "Snapmaker PET",
-      "sub_path": "filament/Snapmaker PET.json"
-    },
-    {
-      "name": "Snapmaker PET @Dual",
-      "sub_path": "filament/Snapmaker PET @Dual.json"
-    },
-    {
-      "name": "Snapmaker PETG-CF @base",
-      "sub_path": "filament/Snapmaker PETG-CF @base.json"
-    },
-    {
-      "name": "Snapmaker PETG-CF",
-      "sub_path": "filament/Snapmaker PETG-CF.json"
-    },
-    {
-      "name": "Snapmaker PLA Eco @base",
-      "sub_path": "filament/Snapmaker PLA Eco @base.json"
-    },
-    {
-      "name": "Snapmaker PLA Eco",
-      "sub_path": "filament/Snapmaker PLA Eco.json"
-    },
-    {
-      "name": "Snapmaker PLA @base",
-      "sub_path": "filament/Snapmaker PLA @base.json"
-    },
-    {
-      "name": "Snapmaker PLA",
-      "sub_path": "filament/Snapmaker PLA.json"
-    },
-    {
-      "name": "Snapmaker PLA-CF @base",
-      "sub_path": "filament/Snapmaker PLA-CF @base.json"
-    },
-    {
-      "name": "Snapmaker PLA-CF",
-      "sub_path": "filament/Snapmaker PLA-CF.json"
-    },
-    {
-      "name": "Snapmaker PLA Silk @base",
-      "sub_path": "filament/Snapmaker PLA Silk @base.json"
-    },
-    {
-      "name": "Snapmaker PLA Silk",
-      "sub_path": "filament/Snapmaker PLA Silk.json"
-    },
-    {
-      "name": "Snapmaker PLA Silk @0.2 nozzle",
-      "sub_path": "filament/Snapmaker PLA Silk @0.2 nozzle.json"
-    },
-    {
-      "name": "PolyLite PLA @base",
-      "sub_path": "filament/PolyLite PLA @base.json"
-    },
-    {
-      "name": "PolyLite PLA",
-      "sub_path": "filament/PolyLite PLA.json"
-    },
-    {
-      "name": "PolyLite PLA @0.2 nozzle",
-      "sub_path": "filament/PolyLite PLA @0.2 nozzle.json"
-    },
-    {
-      "name": "PolyTerra PLA @base",
-      "sub_path": "filament/PolyTerra PLA @base.json"
-    },
-    {
-      "name": "PolyTerra PLA",
-      "sub_path": "filament/PolyTerra PLA.json"
-    },
-    {
-      "name": "PolyTerra PLA @0.2 nozzle",
-      "sub_path": "filament/PolyTerra PLA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker PVA @base",
-      "sub_path": "filament/Snapmaker PVA @base.json"
-    },
-    {
-      "name": "Snapmaker PVA",
-      "sub_path": "filament/Snapmaker PVA.json"
-    },
-    {
-      "name": "Snapmaker PVA @0.2 nozzle",
-      "sub_path": "filament/Snapmaker PVA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker TPU @base",
-      "sub_path": "filament/Snapmaker TPU @base.json"
-    },
-    {
-      "name": "Snapmaker TPU",
-      "sub_path": "filament/Snapmaker TPU.json"
-    },
-    {
-      "name": "Snapmaker TPE",
-      "sub_path": "filament/Snapmaker TPE.json"
-    },
-    {
-      "name": "Snapmaker J1 ABS @base",
-      "sub_path": "filament/Snapmaker J1 ABS @base.json"
-    },
-    {
-      "name": "Snapmaker J1 ABS",
-      "sub_path": "filament/Snapmaker J1 ABS.json"
-    },
-    {
-      "name": "Snapmaker J1 ABS @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 ABS @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 ABS @0.8 nozzle",
-      "sub_path": "filament/Snapmaker J1 ABS @0.8 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 ASA @base",
-      "sub_path": "filament/Snapmaker J1 ASA @base.json"
-    },
-    {
-      "name": "Snapmaker J1 ASA",
-      "sub_path": "filament/Snapmaker J1 ASA.json"
-    },
-    {
-      "name": "Snapmaker J1 ASA @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 ASA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PA-CF @base",
-      "sub_path": "filament/Snapmaker J1 PA-CF @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PA-CF",
-      "sub_path": "filament/Snapmaker J1 PA-CF.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG @base",
-      "sub_path": "filament/Snapmaker J1 PETG @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG",
-      "sub_path": "filament/Snapmaker J1 PETG.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PETG @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG @0.8 nozzle",
-      "sub_path": "filament/Snapmaker J1 PETG @0.8 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PET @base",
-      "sub_path": "filament/Snapmaker J1 PET @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PET",
-      "sub_path": "filament/Snapmaker J1 PET.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG-CF @base",
-      "sub_path": "filament/Snapmaker J1 PETG-CF @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PETG-CF",
-      "sub_path": "filament/Snapmaker J1 PETG-CF.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Eco @base",
-      "sub_path": "filament/Snapmaker J1 PLA Eco @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Eco",
-      "sub_path": "filament/Snapmaker J1 PLA Eco.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Eco @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Eco @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Eco @0.8 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Eco @0.8 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA @base",
-      "sub_path": "filament/Snapmaker J1 PLA @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA",
-      "sub_path": "filament/Snapmaker J1 PLA.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Matte @base",
-      "sub_path": "filament/Snapmaker J1 PLA Matte @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Matte",
-      "sub_path": "filament/Snapmaker J1 PLA Matte.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Matte @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Matte @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Matte @0.8 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Matte @0.8 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Metal @base",
-      "sub_path": "filament/Snapmaker J1 PLA Metal @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Metal",
-      "sub_path": "filament/Snapmaker J1 PLA Metal.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Metal @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Metal @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA-CF @base",
-      "sub_path": "filament/Snapmaker J1 PLA-CF @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA-CF",
-      "sub_path": "filament/Snapmaker J1 PLA-CF.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA-CF @0.8 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA-CF @0.8 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Silk @base",
-      "sub_path": "filament/Snapmaker J1 PLA Silk @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Silk",
-      "sub_path": "filament/Snapmaker J1 PLA Silk.json"
-    },
-    {
-      "name": "Snapmaker J1 PLA Silk @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PLA Silk @0.2 nozzle.json"
-    },
-    {
-      "name": "PolyLite J1 PLA",
-      "sub_path": "filament/PolyLite J1 PLA.json"
-    },
-    {
-      "name": "PolyLite J1 PLA @0.2 nozzle",
-      "sub_path": "filament/PolyLite J1 PLA @0.2 nozzle.json"
-    },
-    {
-      "name": "PolyTerra J1 PLA",
-      "sub_path": "filament/PolyTerra J1 PLA.json"
-    },
-    {
-      "name": "PolyTerra J1 PLA @0.2 nozzle",
-      "sub_path": "filament/PolyTerra J1 PLA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 PVA @base",
-      "sub_path": "filament/Snapmaker J1 PVA @base.json"
-    },
-    {
-      "name": "Snapmaker J1 PVA",
-      "sub_path": "filament/Snapmaker J1 PVA.json"
-    },
-    {
-      "name": "Snapmaker J1 PVA @0.2 nozzle",
-      "sub_path": "filament/Snapmaker J1 PVA @0.2 nozzle.json"
-    },
-    {
-      "name": "Snapmaker J1 TPU @base",
-      "sub_path": "filament/Snapmaker J1 TPU @base.json"
-    },
-    {
-      "name": "Snapmaker J1 TPU",
-      "sub_path": "filament/Snapmaker J1 TPU.json"
-    },
-    {
-      "name": "Snapmaker J1 TPU High-Flow",
-      "sub_path": "filament/Snapmaker J1 TPU High-Flow.json"
-    },
-    {
-      "name": "Snapmaker J1 TPE",
-      "sub_path": "filament/Snapmaker J1 TPE.json"
-    }
-  ],
-  "machine_list": [
-    {
-      "name": "fdm_common",
-      "sub_path": "machine/fdm_common.json"
-    },
-    {
-      "name": "fdm_linear2",
-      "sub_path": "machine/fdm_linear2.json"
-    },
-    {
-      "name": "fdm_linear2_dual",
-      "sub_path": "machine/fdm_linear2_dual.json"
-    },
-    {
-      "name": "fdm_idex",
-      "sub_path": "machine/fdm_idex.json"
-    },
-    {
-      "name": "fdm_a250",
-      "sub_path": "machine/fdm_a250.json"
-    },
-    {
-      "name": "fdm_a350",
-      "sub_path": "machine/fdm_a350.json"
-    },
-    {
-      "name": "fdm_a250_dual",
-      "sub_path": "machine/fdm_a250_dual.json"
-    },
-    {
-      "name": "fdm_a350_dual",
-      "sub_path": "machine/fdm_a350_dual.json"
-    },
-    {
-      "name": "fdm_a250_qs",
-      "sub_path": "machine/fdm_a250_qs.json"
-    },
-    {
-      "name": "fdm_a350_qs",
-      "sub_path": "machine/fdm_a350_qs.json"
-    },
-    {
-      "name": "fdm_a250_dual_qs",
-      "sub_path": "machine/fdm_a250_dual_qs.json"
-    },
-    {
-      "name": "fdm_a350_dual_qs",
-      "sub_path": "machine/fdm_a350_dual_qs.json"
-    },
-    {
-      "name": "Snapmaker J1 (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker J1 (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker J1 (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker J1 (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker J1 (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker J1 (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker J1 (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker J1 (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A250 (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A250 (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A250 (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A250 (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A350 (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A350 (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A350 (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A350 (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 QSKit (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A250 QSKit (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 QSKit (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A250 QSKit (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 QSKit (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A250 QSKit (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 QSKit (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A250 QSKit (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 QSKit (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A350 QSKit (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 QSKit (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A350 QSKit (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 QSKit (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A350 QSKit (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 QSKit (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A350 QSKit (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual QSKit (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual QSKit (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual QSKit (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual QSKit (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual QSKit (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual QSKit (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A250 Dual QSKit (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A250 Dual QSKit (0.8 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual QSKit (0.2 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual QSKit (0.2 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual QSKit (0.4 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual QSKit (0.4 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual QSKit (0.6 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual QSKit (0.6 nozzle).json"
-    },
-    {
-      "name": "Snapmaker A350 Dual QSKit (0.8 nozzle)",
-      "sub_path": "machine/Snapmaker A350 Dual QSKit (0.8 nozzle).json"
-    }
-  ]
-}
\ No newline at end of file
diff --git a/OrcaSlicer/Snapmaker/machine/fdm_a250.json b/OrcaSlicer/Snapmaker/machine/fdm_a250.json
index 8b33fa8..e95e819 100644
--- a/OrcaSlicer/Snapmaker/machine/fdm_a250.json
+++ b/OrcaSlicer/Snapmaker/machine/fdm_a250.json
@@ -15,6 +15,6 @@
     "0x250"
   ],
   "machine_start_gcode": "; Model: Snapmaker A250\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z156 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
-  "machine_end_gcode": "G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
+  "machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
   "before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
 }
\ No newline at end of file
diff --git a/OrcaSlicer/Snapmaker/machine/fdm_a250_dual.json b/OrcaSlicer/Snapmaker/machine/fdm_a250_dual.json
index 35342b7..aa1ba00 100644
--- a/OrcaSlicer/Snapmaker/machine/fdm_a250_dual.json
+++ b/OrcaSlicer/Snapmaker/machine/fdm_a250_dual.json
@@ -15,7 +15,7 @@
     "0x250"
   ],
   "machine_start_gcode": "; Model: Snapmaker A250 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [plate_name]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z136 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[0] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}220{endif} F3420.0\nG0 X{if 0 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[0]} C3 W1\nG1 X{if 0 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[1] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}220{endif} F3420.0\nG0 X{if 1 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[1]} C3 W1\nG1 X{if 1 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
-  "machine_end_gcode": "G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
+  "machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
   "change_filament_gcode": ";***** Update: 20230923\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{temperature_vitrification[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n  || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n  ; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\n  M140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_num == 1}\n  G1 E{retraction_length[next_extruder]} F2000;deretract\n{endif}\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n;  M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n; End Toolchange\n{endif}",
   "before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
 }
\ No newline at end of file
diff --git a/OrcaSlicer/Snapmaker/machine/fdm_a350.json b/OrcaSlicer/Snapmaker/machine/fdm_a350.json
index ea80b72..4398c81 100644
--- a/OrcaSlicer/Snapmaker/machine/fdm_a350.json
+++ b/OrcaSlicer/Snapmaker/machine/fdm_a350.json
@@ -15,6 +15,6 @@
     "0x350"
   ],
   "machine_start_gcode": "; Model: Snapmaker A350\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z220 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
-  "machine_end_gcode": "G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
+  "machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
   "before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
 }
\ No newline at end of file
diff --git a/OrcaSlicer/Snapmaker/machine/fdm_a350_dual.json b/OrcaSlicer/Snapmaker/machine/fdm_a350_dual.json
index 577c7e5..3ffbd99 100644
--- a/OrcaSlicer/Snapmaker/machine/fdm_a350_dual.json
+++ b/OrcaSlicer/Snapmaker/machine/fdm_a350_dual.json
@@ -15,7 +15,7 @@
     "0x350"
   ],
   "machine_start_gcode": "; Model: Snapmaker A350 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [plate_name]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z193 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[0] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}310{endif} F3420.0\nG0 X{if 0 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[0]} C3 W1\nG1 X{if 0 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[1] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}310{endif} F3420.0\nG0 X{if 1 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[1]} C3 W1\nG1 X{if 1 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
-  "machine_end_gcode": "G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
+  "machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
   "change_filament_gcode": ";***** Update: 20230923\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{temperature_vitrification[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n  || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n  ; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\n  M140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_num == 1}\n  G1 E{retraction_length[next_extruder]} F2000;deretract\n{endif}\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n;  M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n; End Toolchange\n{endif}",
   "before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
 }
\ No newline at end of file
diff --git a/OrcaSlicer/Snapmaker/machine/fdm_idex.json b/OrcaSlicer/Snapmaker/machine/fdm_idex.json
index 5ec7b57..867e6b3 100644
--- a/OrcaSlicer/Snapmaker/machine/fdm_idex.json
+++ b/OrcaSlicer/Snapmaker/machine/fdm_idex.json
@@ -101,7 +101,7 @@
     "Snapmaker J1 PETG"
   ],
   "machine_start_gcode": "; Model: Snapmaker J1 ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [plate_name]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nT[initial_extruder]\n\nM205 V20 ;Junction Deviation (mm)\n\n{if plate_name =~/.*IDEXDupl.*/ || plate_name =~/.*IDEXCopy.*/ }\n  M605 S2 X162 R0 ;IDEX Duplication\n{elsif plate_name =~/.*IDEXMirr.*/}\n  M605 S3 ;IDEX Mirror\n{elsif plate_name =~/.*IDEXBack.*/}\n  M605 S4 ;IDEX Backup\n{endif}\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\n\nG0 Z100.0\n{if is_extruder_used[0]}\n    T0\n    G0 X{if 0 == 0}80{else}240{endif} Y0 F7980.0\n    {endif}\n{if is_extruder_used[1]}\n    T1\n    G0 X{if 1 == 0}80{else}240{endif} Y0 F7980.0\n    {endif}\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n{if 1==1}; LED\n  M355 S1 P64\n  G4 P100\n  M355 S1 P128\n  G4 P100\n  M355 S1 P64\n  G4 P200\n  M355 S1 P255\n  G4 P100\n{endif}\nG28 X Y\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F240.0\nG0 X{if 0 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[0] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (fan_max_speed[0] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[0] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{nozzle_temperature_initial_layer[0]} C3 W1\nG1 X{if 0 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 0 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F240.0\nG0 X{if 1 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[1] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (fan_max_speed[1] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[1] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{nozzle_temperature_initial_layer[1]} C3 W1\nG1 X{if 1 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 1 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{temperature_vitrification[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F240.0\nG0 X{if initial_extruder == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
-  "machine_end_gcode": "G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
+  "machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
   "change_filament_gcode": ";***** Update: 20230730\n{if current_extruder != next_extruder}\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{temperature_vitrification[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == \"PLA\" || filament_type[current_extruder] == \"TPU\")\n  || (filament_type[next_extruder] == \"PLA\" || filament_type[next_extruder] == \"TPU\"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM2000 S200 V[travel_speed] A[travel_acceleration] ;quick switch extruders, S:200 mode/V:speed/A:acceleration\nM109 T[next_extruder] S{if layer_num < 1}[nozzle_temperature_initial_layer]{else}[nozzle_temperature]{endif} C3 W1 ;wait T[next_extruder]\n{if layer_z > first_layer_height && layer_num >= close_fan_the_first_x_layers[next_extruder]}\n  M106 P[next_extruder] S{fan_min_speed[next_extruder] * 255.0 / 100.0} ;restore fan speed for T[next_extruder]\n{endif}\n\n{endif}",
   "before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
 }
\ No newline at end of file
diff --git a/PrusaSlicer/Snapmaker.ini b/PrusaSlicer/Snapmaker.ini
index 25e896b..0afbc7c 100644
--- a/PrusaSlicer/Snapmaker.ini
+++ b/PrusaSlicer/Snapmaker.ini
@@ -1,5 +1,5 @@
 # Author: https://github.com/macdylan
-# Update: 2023/11/30
+# Update: 2023/12/05
 [vendor]
 name = Snapmaker
 config_version = 1.0.0
@@ -348,7 +348,7 @@ output_filename_format = {input_filename_base}_{layer_height}mm_{print_time}_J1.
 
 [print:0.06 Standard @Snapmaker (0.2 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 layer_height = 0.06
 ironing_speed = 30
 travel_speed = 110
@@ -408,7 +408,7 @@ overhang_speed_2 = 10
 
 [print:0.08 Extra Fine @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 elefant_foot_compensation = 0.15
 layer_height = 0.08
 initial_layer_infill_speed = 65
@@ -456,7 +456,7 @@ support_material_threshold = 15
 
 [print:0.10 Standard @Snapmaker (0.2 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 layer_height = 0.1
 initial_layer_infill_speed = 70
 ironing_speed = 30
@@ -519,7 +519,7 @@ overhang_speed_2 = 10
 
 [print:0.12 Fine @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 layer_height = 0.12
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 65
@@ -566,7 +566,7 @@ support_material_threshold = 20
 
 [print:0.14 Standard @Snapmaker (0.2 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 layer_height = 0.14
 initial_layer_infill_speed = 70
 ironing_speed = 30
@@ -627,7 +627,7 @@ overhang_speed_2 = 10
 
 [print:0.16 Optimal @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 layer_height = 0.16
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 65
@@ -673,7 +673,7 @@ support_material_threshold = 25
 
 [print:0.18 Standard @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.18
 initial_layer_infill_speed = 55
 ironing_speed = 30
@@ -731,7 +731,7 @@ overhang_speed_1 = 50
 
 [print:0.20 Standard @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 60
 ironing_speed = 30
@@ -767,7 +767,7 @@ overhang_speed_2 = 10
 
 [print:0.20 Strength @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 65
 infill_wall_overlap = 25%
@@ -809,7 +809,7 @@ overhang_speed_2 = 10
 
 [print:0.24 Draft @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 layer_height = 0.24
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 65
@@ -901,7 +901,7 @@ output_filename_format = J1Benchy_{print_time}.gcode
 
 [print:0.24 Standard @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.24
 initial_layer_infill_speed = 55
 ironing_speed = 30
@@ -957,7 +957,7 @@ overhang_speed_1 = 50
 
 [print:0.24 Standard @Snapmaker (0.8 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8")
 layer_height = 0.24
 top_surface_pattern = monotonic
 initial_layer_infill_speed = 55
@@ -1019,7 +1019,7 @@ overhang_speed_3 = 5
 
 [print:0.28 Extra Draft @Snapmaker (0.4 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.4")
 layer_height = 0.28
 elefant_foot_compensation = 0.15
 initial_layer_infill_speed = 65
@@ -1062,7 +1062,7 @@ support_material_threshold = 40
 
 [print:0.30 Standard @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.3
 bridge_speed = 30
 initial_layer_infill_speed = 55
@@ -1118,7 +1118,7 @@ overhang_speed_1 = 50
 
 [print:0.30 Strength @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.3
 bridge_speed = 30
 initial_layer_infill_speed = 55
@@ -1178,7 +1178,7 @@ overhang_speed_1 = 50
 
 [print:0.32 Standard @Snapmaker (0.8 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8")
 layer_height = 0.32
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1240,7 +1240,7 @@ overhang_speed_3 = 5
 
 [print:0.34 Standard @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.34
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1301,7 +1301,7 @@ overhang_speed_1 = 50
 
 [print:0.36 Standard @Snapmaker (0.8 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8")
 layer_height = 0.36
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1363,7 +1363,7 @@ overhang_speed_3 = 5
 
 [print:0.38 Standard @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.38
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1423,7 +1423,7 @@ overhang_speed_1 = 50
 
 [print:0.40 Standard @Snapmaker (0.8 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8")
 layer_height = 0.4
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1483,7 +1483,7 @@ overhang_speed_3 = 5
 
 [print:0.42 Draft @Snapmaker (0.6 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.6")
 layer_height = 0.42
 bridge_speed = 30
 initial_layer_infill_speed = 55
@@ -1541,7 +1541,7 @@ overhang_speed_1 = 50
 
 [print:0.48 Draft @Snapmaker (0.8 nozzle)]
 inherits = *fdm_process_common*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8")
 layer_height = 0.48
 bridge_speed = 30
 top_surface_pattern = monotonic
@@ -1935,11 +1935,11 @@ inherits = *fdm_filament_abs*
 
 [filament:Snapmaker ABS]
 inherits = *Snapmaker ABS @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker ABS @0.2 nozzle]
 inherits = *Snapmaker ABS @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 2
 
 [filament:*Snapmaker ASA @base*]
@@ -1947,11 +1947,11 @@ inherits = *fdm_filament_asa*
 
 [filament:Snapmaker ASA]
 inherits = *Snapmaker ASA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker ASA @0.2 nozzle]
 inherits = *Snapmaker ASA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 2
 
 [filament:*Snapmaker PA-CF @base*]
@@ -1959,18 +1959,18 @@ inherits = *fdm_filament_pa*
 
 [filament:Snapmaker PA-CF]
 inherits = *Snapmaker PA-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker PETG @base*]
 inherits = *fdm_filament_petg*
 
 [filament:Snapmaker PETG]
 inherits = *Snapmaker PETG @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker PETG @0.2 nozzle]
 inherits = *Snapmaker PETG @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 1
 
 [filament:*Snapmaker PET @base*]
@@ -1978,11 +1978,11 @@ inherits = *fdm_filament_pet*
 
 [filament:Snapmaker PET]
 inherits = *Snapmaker PET @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker PET @Dual]
 inherits = *Snapmaker PET @base*
-compatible_printers_condition = (printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 min_fan_speed = 20
 max_fan_speed = 55
 bridge_fan_speed = 40
@@ -2006,21 +2006,21 @@ filament_colour = #3D3C39
 
 [filament:Snapmaker PETG-CF]
 inherits = *Snapmaker PETG-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker PLA Eco @base*]
 inherits = *fdm_filament_pla_eco*
 
 [filament:Snapmaker PLA Eco]
 inherits = *Snapmaker PLA Eco @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
 
 [filament:*Snapmaker PLA @base*]
 inherits = *fdm_filament_pla*
 
 [filament:Snapmaker PLA]
 inherits = *Snapmaker PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
 
 [filament:*Snapmaker PLA-CF @base*]
 inherits = *fdm_filament_pla*
@@ -2034,7 +2034,7 @@ filament_colour = #3D3C39
 
 [filament:Snapmaker PLA-CF]
 inherits = *Snapmaker PLA-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker PLA Silk @base*]
 inherits = *fdm_filament_pla*
@@ -2046,11 +2046,11 @@ filament_colour = #CF942B
 
 [filament:Snapmaker PLA Silk]
 inherits = *Snapmaker PLA Silk @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker PLA Silk @0.2 nozzle]
 inherits = *Snapmaker PLA Silk @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 2
 
 [filament:*PolyLite PLA @base*]
@@ -2062,11 +2062,11 @@ filament_colour = #8269AC
 
 [filament:PolyLite PLA]
 inherits = *PolyLite PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:PolyLite PLA @0.2 nozzle]
 inherits = *PolyLite PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 1
 
 [filament:*PolyTerra PLA @base*]
@@ -2078,11 +2078,11 @@ filament_colour = #73CEC8
 
 [filament:PolyTerra PLA]
 inherits = *PolyTerra PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:PolyTerra PLA @0.2 nozzle]
 inherits = *PolyTerra PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 1
 
 [filament:*Snapmaker PVA @base*]
@@ -2090,11 +2090,11 @@ inherits = *fdm_filament_pva*
 
 [filament:Snapmaker PVA]
 inherits = *Snapmaker PVA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker PVA @0.2 nozzle]
 inherits = *Snapmaker PVA @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.2")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.2")
 filament_max_volumetric_speed = 1.2
 
 [filament:*Snapmaker TPU @base*]
@@ -2102,11 +2102,11 @@ inherits = *fdm_filament_tpu*
 
 [filament:Snapmaker TPU]
 inherits = *Snapmaker TPU @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker TPE]
 inherits = *Snapmaker TPU @base*
-compatible_printers_condition = (printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A250 Dual") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250" or printer_model=="Snapmaker A350 QSKit" or printer_model=="Snapmaker A250 QSKit") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 filament_density = 1.22
 filament_max_volumetric_speed = 7.2
 filament_notes = "eSUN eLastic TPE-83A\n"
@@ -2127,7 +2127,7 @@ start_filament_gcode = "M900 K0.02 ;override pressure advance value"
 
 [filament:Snapmaker J1 ABS]
 inherits = *Snapmaker J1 ABS @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 ABS @0.2 nozzle]
 inherits = *Snapmaker J1 ABS @base*
@@ -2147,7 +2147,7 @@ bridge_fan_speed = 20
 
 [filament:Snapmaker J1 ASA]
 inherits = *Snapmaker J1 ASA @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 ASA @0.2 nozzle]
 inherits = *Snapmaker J1 ASA @base*
@@ -2162,7 +2162,7 @@ extrusion_multiplier = 0.96
 
 [filament:Snapmaker J1 PA-CF]
 inherits = *Snapmaker J1 PA-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker J1 PETG @base*]
 inherits = *fdm_filament_petg*
@@ -2176,7 +2176,7 @@ max_fan_speed = 40
 
 [filament:Snapmaker J1 PETG]
 inherits = *Snapmaker J1 PETG @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PETG @0.2 nozzle]
 inherits = *Snapmaker J1 PETG @base*
@@ -2200,7 +2200,7 @@ min_print_speed = 35
 
 [filament:Snapmaker J1 PET]
 inherits = *Snapmaker J1 PET @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker J1 PETG-CF @base*]
 inherits = *fdm_filament_petg*
@@ -2223,7 +2223,7 @@ filament_colour = #3D3C39
 
 [filament:Snapmaker J1 PETG-CF]
 inherits = *Snapmaker J1 PETG-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:*Snapmaker J1 PLA Eco @base*]
 inherits = *fdm_filament_pla_eco*
@@ -2232,7 +2232,7 @@ filament_max_volumetric_speed = 12
 
 [filament:Snapmaker J1 PLA Eco]
 inherits = *Snapmaker J1 PLA Eco @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PLA Eco @0.2 nozzle]
 inherits = *Snapmaker J1 PLA Eco @base*
@@ -2251,7 +2251,7 @@ filament_retract_length = nil
 
 [filament:Snapmaker J1 PLA]
 inherits = *Snapmaker J1 PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
 
 [filament:*Snapmaker J1 PLA Matte @base*]
 inherits = *fdm_filament_pla*
@@ -2262,7 +2262,7 @@ filament_colour = #EAC3C3
 
 [filament:Snapmaker J1 PLA Matte]
 inherits = *Snapmaker J1 PLA Matte @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PLA Matte @0.2 nozzle]
 inherits = *Snapmaker J1 PLA Matte @base*
@@ -2285,7 +2285,7 @@ filament_colour = #767A7E
 
 [filament:Snapmaker J1 PLA Metal]
 inherits = *Snapmaker J1 PLA Metal @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PLA Metal @0.2 nozzle]
 inherits = *Snapmaker J1 PLA Metal @base*
@@ -2307,7 +2307,7 @@ filament_colour = #3D3C39
 
 [filament:Snapmaker J1 PLA-CF]
 inherits = *Snapmaker J1 PLA-CF @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PLA-CF @0.8 nozzle]
 inherits = *Snapmaker J1 PLA-CF @base*
@@ -2327,7 +2327,7 @@ filament_colour = #CF942B
 
 [filament:Snapmaker J1 PLA Silk]
 inherits = *Snapmaker J1 PLA Silk @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PLA Silk @0.2 nozzle]
 inherits = *Snapmaker J1 PLA Silk @base*
@@ -2336,7 +2336,7 @@ filament_max_volumetric_speed = 2
 
 [filament:PolyLite J1 PLA]
 inherits = *PolyLite PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:PolyLite J1 PLA @0.2 nozzle]
 inherits = PolyLite PLA @0.2 nozzle
@@ -2344,7 +2344,7 @@ compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diam
 
 [filament:PolyTerra J1 PLA]
 inherits = *PolyTerra PLA @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:PolyTerra J1 PLA @0.2 nozzle]
 inherits = PolyTerra PLA @0.2 nozzle
@@ -2356,7 +2356,7 @@ slowdown_below_layer_time = 8
 
 [filament:Snapmaker J1 PVA]
 inherits = *Snapmaker J1 PVA @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 PVA @0.2 nozzle]
 inherits = *Snapmaker J1 PVA @base*
@@ -2370,11 +2370,11 @@ inherits = *fdm_filament_tpu*
 
 [filament:Snapmaker J1 TPU]
 inherits = *Snapmaker J1 TPU @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 
 [filament:Snapmaker J1 TPU High-Flow]
 inherits = *Snapmaker J1 TPU @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 filament_max_volumetric_speed = 7.6
 filament_notes = "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n"
 filament_retract_length = 0.8
@@ -2384,7 +2384,7 @@ extrusion_multiplier = 0.983
 
 [filament:Snapmaker J1 TPE]
 inherits = *Snapmaker J1 TPU @base*
-compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.8")
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
 filament_density = 1.22
 filament_max_volumetric_speed = 7.2
 filament_notes = "eSUN eLastic TPE-83A\n"
@@ -2489,7 +2489,7 @@ thumbnails = 300x300
 extruder_offset = 0x0,0x0
 default_filament_profile = Snapmaker J1 PLA,Snapmaker J1 PETG
 start_gcode = ; Model: Snapmaker J1 ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM205 V20 ;Junction Deviation (mm)\n\n{if physical_printer_preset =~/.*IDEXDupl.*/ || physical_printer_preset =~/.*IDEXCopy.*/ }\n  M605 S2 X162 R0 ;IDEX Duplication\n{elsif physical_printer_preset =~/.*IDEXMirr.*/}\n  M605 S3 ;IDEX Mirror\n{elsif physical_printer_preset =~/.*IDEXBack.*/}\n  M605 S4 ;IDEX Backup\n{endif}\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\n\nG0 Z100.0\n{if is_extruder_used[0]}\n    T0\n    G0 X{if 0 == 0}80{else}240{endif} Y0 F7980.0\n    {endif}\n{if is_extruder_used[1]}\n    T1\n    G0 X{if 1 == 0}80{else}240{endif} Y0 F7980.0\n    {endif}\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n{if 1==1}; LED\n  M355 S1 P64\n  G4 P100\n  M355 S1 P128\n  G4 P100\n  M355 S1 P64\n  G4 P200\n  M355 S1 P255\n  G4 P100\n{endif}\nG28 X Y\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F240.0\nG0 X{if 0 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 0 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F240.0\nG0 X{if 1 == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if 1 == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F240.0\nG0 X{if initial_extruder == 0}-7{else}331{endif} F7980.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E50 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E50 F200\n\nG0 E-0.5 F200\nM107\n\nG28 X\n\nG0 Z1.0 F240.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}142.0{else}182.0{endif} F7980.0\nG1 Z0.3 F240.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}10{else}314{endif} E9.47915 F7980.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}10.5{else}313.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}19.5{else}304.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
-end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
+end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-40 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
 toolchange_gcode = ;***** Update: 20230730\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n  || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM2000 S200 V[travel_speed] A[travel_acceleration] ;quick switch extruders, S:200 mode/V:speed/A:acceleration\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n  M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n  M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n  M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
 before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
 bed_shape = 0x0,324x0,324x200,0x200
@@ -2506,7 +2506,7 @@ inherits = *fdm_linear2*
 name = *fdm_a250*
 printer_notes = PRINTER_MODEL_SNAPMAKER_A250\n
 start_gcode = ; Model: Snapmaker A250\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [physical_printer_preset]\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z156 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
-end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
+end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
 before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
 bed_shape = 0x0,230x0,230x250,0x250
 max_print_height = 235
@@ -2516,7 +2516,7 @@ inherits = *fdm_linear2*
 name = *fdm_a350*
 printer_notes = PRINTER_MODEL_SNAPMAKER_A350\n
 start_gcode = ; Model: Snapmaker A350\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [physical_printer_preset]\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z220 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
-end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
+end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n    M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
 before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
 bed_shape = 0x0,320x0,320x350,0x350
 max_print_height = 330
@@ -2526,7 +2526,7 @@ inherits = *fdm_linear2_dual*
 name = *fdm_a250_dual*
 printer_notes = PRINTER_MODEL_SNAPMAKER_A250_DUAL\n
 start_gcode = ; Model: Snapmaker A250 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z136 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X230\nG0 Y250\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}220{endif} F3420.0\nG0 X{if 0 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}220{endif} F3420.0\nG0 X{if 1 == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}240{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}220{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}240{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}105.0{else}125.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}230{endif} E6.54809 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}229.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}220.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
-end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
+end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
 toolchange_gcode = ;***** Update: 20231010\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n  || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n  M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n  M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n  M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
 before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
 bed_shape = 0x0,230x0,230x250,0x250
@@ -2537,7 +2537,7 @@ inherits = *fdm_linear2_dual*
 name = *fdm_a350_dual*
 printer_notes = PRINTER_MODEL_SNAPMAKER_A350_DUAL\n
 start_gcode = ; Model: Snapmaker A350 Dual ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate   : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z193 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n  T0\nG0 Z20 F960.0\nG0 X{if 0 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\nM104 S{first_layer_temperature[0] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 0 == 0}10{else}310{endif} F3420.0\nG0 X{if 0 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[0]} C3 W1\nG1 X{if 0 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 0 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 0 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 0 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n  T1\nG0 Z20 F960.0\nG0 X{if 1 == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\nM104 S{first_layer_temperature[1] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if 1 == 0}10{else}310{endif} F3420.0\nG0 X{if 1 == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[1]} C3 W1\nG1 X{if 1 == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if 1 == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if 1 == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if 1 == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n  M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E45 F80.0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG0 E45 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [physical_printer_preset]
-end_gcode = G92 E0\n\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
+end_gcode = G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-35 F200\nG28\n\n    {if is_extruder_used[0]}M104 T0 S0{endif}\n    {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
 toolchange_gcode = ;***** Update: 20231010\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer [layer_num]\n; layer\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n  || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n  M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\n\n{if layer_z <= (first_layer_height + 0.001)}\n  M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n  M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
 before_layer_gcode = ; layer_num: [layer_num]\nG92 E0
 bed_shape = 0x0,320x0,320x350,0x350