The CUE project welcomes all contributors, and there are many ways that you can contribute that don't involve writing code!
This document guides you through the process of contributing to the CUE project.
There are many ways that you can contribute to the CUE project that don't involve writing code.
- Using CUE is a form of contributing! Especially when combined with raising issues, providing feedback, tell us what works well and what doesn't, pointing out gaps etc.
- Adding your CUE-based project to
unityhelps ensure that we don't create releases that unintentionally break configurations, but also gives a wide variety of scenarios in which to test bug fixes, performance improvements and the like. - Asking questions via GitHub discussions/Slack. This might seem somewhat counterintuitive, but asking questions helps to identify gaps in documentation, or poor signposting from the CUE homepage.
- Raising issues with bug reports and feature requests helps us to raise the quality of future CUE releases. In the case of bug reports not least because it provides us with real-world test cases.
- Helping to manage issues and answer discussions. Sometimes referred to as "issue gardening", this helps to share the load of triaging new issues and feature requests. Having issues presented in a familiar "shape", format and voice is a massive time saver when it comes to one of the core contributors fixing a bug, or considering a new feature.
- Code contributions, the main focus of this guide. The CUE project is a little different from that used by other open source projects so we cover this process in more detail below.
- Contributing thoughts and use cases use cases to proposals. CUE can be and is being used in many varied different ways. Sharing experience reports helps to shape proposals and designs.
- Creating content. Whether it be writing blog posts, live streaming, tweeting... creating content is a great way of growing the CUE community. Different people have different ways of explaining things, and very often these different styles appeal to different people. That said, if you think there is core documentation or guides missing from the https://cuelang.org website please raise an issue to let us know: there is not substitute for good core content, and it means others are then free to write about more interesting use cases and applications for CUE.
- Holding community events. Whether they be virtual online events or (COVID-allowing) in-person meetups, sharing experiences about using CUE is a very valuable way of learning for many.
Thank you to everyone who contributes to the CUE community in whatever form! Whilst GitHub doesn't have a good means of tracking contributions outside of code contributions, your contributions are greatly valued!
As with many open source projects, CUE uses the GitHub issue tracker to not only track bugs, but also coordinate work on new features, bugs, designs and proposals. Given the inherently distributed nature of open-source this coordination is important because it very often serves as the main form of communication between contributors.
Whether you already know what contribution to make, or you are searching for an idea, the issue tracker is always the first place to go. Issues are triaged to categorize them and manage the workflow.
Most issues will be marked with one of the following workflow labels (links are to queries in the issue tracker):
- Triage: Requires review by one of the core project maintainers.
- NeedsInvestigation: The issue is not fully understood and requires analysis to understand the root cause.
- NeedsDecision: the issue is relatively well understood, but the CUE team hasn't yet decided the best way to address it. It would be better to wait for a decision before writing code. If you are interested on working on an issue in this state, feel free to "ping" maintainers in the issue's comments if some time has passed without a decision.
- NeedsFix: the issue is fully understood and code can be written to fix it.
- help wanted: project maintainers need input from someone who has experience or expertise to answer or progress this issue.
- good first
issue:
often combined with
NeedsFix,good first issueindicates an issue is very likely a good candidate for someone looking to make their first code contribution.
Excluding very trivial changes, all contributions should be connected to an existing issue. Feel free to open one and discuss your plans. This process gives everyone a chance to validate the design, helps prevent duplication of effort, and ensures that the idea fits inside the goals for the language and tools. It also checks that the design is sound before code is written; the code review tool is not the place for high-level discussions.
Sensitive security-related issues should be reported to [email protected].
The code contribution process used by the CUE project is a little different from
that used by other open source projects. We assume you have a basic
understanding of git and Go
(1.17 or later).
The first thing to decide is whether you want to contribute a code change via GitHub or GerritHub. Both workflows are fully supported, and whilst GerritHub is used by the core project maintainers as the "source of truth", the GitHub Pull Request workflow is 100% supported - contributors should feel entirely comfortable contributing this way if they prefer.
Contributions via either workflow must be accompanied by a Developer Certificate of Origin.
Contributions to the CUE project must be accompanied by a Developer Certificate of Origin, the text of which is reproduced here for convenience:
Developer Certificate of Origin
Version 1.1
Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
1 Letterman Drive
Suite D4700
San Francisco, CA, 94129
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
All commit messages must contain the Signed-off-by line with an email address
that matches the commit author. This line asserts the Developer Certificate of Origin.
When committing, use the --signoff (or -s) flag:
$ git commit -sYou can also set up a prepare-commit-msg git
hook to not have to supply
the -s flag.
The explanations of the GitHub and GerritHub contribution workflows that follow assume all commits you create are signed-off in this way.
First-time contributors that are already familiar with the GitHub flow are encouraged to use the same process for CUE contributions. Even though CUE maintainers use GerritHub for code review, the GitHub PR workflow is 100% supported.
Here is a checklist of the steps to follow when contributing via GitHub PR workflow:
- Step 0: Review the guidelines on Good Commit Messages, The Review Process and Miscellaneous Topics
- Step 1: Create a GitHub account if you do not have one.
- Step 2: Fork the CUE project, and clone your fork locally
That's it! You are now ready to send a change via GitHub, the subject of the next section.
The GitHub documentation around working with forks is extensive so we will not cover that ground here.
Before making any changes it's a good idea to verify that you have a stable baseline by running the tests:
$ go test ./...Then make your planned changes and create a commit from the staged changes:
# Edit files
$ git add file1 file2
$ git commit -sNotice as we explained above, the -s flag asserts the Developer Certificate of
Origin by adding a Signed-off-by line to a commit. When writing a commit
message, remember the guidelines on good commit
messages.
You’ve written and tested your code, but before sending code out for review, run all the tests from the root of the repository to ensure the changes don’t break other packages or programs:
$ go test ./...Your change is now ready! Submit a PR in the usual way.
Once your PR is submitted, a maintainer will trigger continuous integration (CI) workflows to run and review your proposed change. The results from CI and the review might indicate further changes are required, and this is where the CUE project differs from others:
Some projects accept and encourage multiple commits in a single PR. Either as a way of breaking down the change into smaller parts, or simply as a record of the various changes during the review process.
The CUE project follows the Gerrit model of a single commit being the unit of change. Therefore, all PRs must only contain a single commit. But how does this work if you need to make changes requested during the review process? Does this not require you to create additional commits?
The easiest way to maintain a single commit is to amend an existing commit. Rather misleadingly, this doesn't actually amend a commit, but instead creates a new commit which is the result of combining the last commit and any new changes:
# PR is submitted, feedback received. Time to make some changes!
$ git add file1 file2 # stage the files we have added/removed/changed
$ git commit --amend # amend the last commit
$ git push -f # push the amended commit to your PRThe -f flag is required to force push your branch to GitHub: this overrides a
warning from git telling you that GitHub knows nothing about the relationship
between the original commit in your PR and the amended commit.
What happens if you accidentally create an additional commit and now have two
commits on your branch? No worries, you can "squash" commits on a branch to
create a single commit. See the GitHub documentation on how to squash commits
with GitHub
Desktop,
or using the git command
interactively.
With the review cycle complete, the CI checks green and your PR approved, it will be imported into GerritHub and then submitted. Your PR will close automatically as it is "merged" in GerritHub. Congratulations! You will have made your first contribution to the CUE project.
Preparing for GerritHub CL Contributions
CUE maintainers use GerritHub for code review. It has a powerful review interface with comments that are attributed to patchsets (versions of a change). Orienting changes around a single commit allows for "stacked" changes, and also encourages unrelated changes to be broken into separate CLs because the process of creating and linking CLs is so easy.
For those more comfortable with contributing via GitHub PRs, please continue to do so: the CUE project supports both workflows so that people have a choice.
For those who would like to contribute via GerritHub, read on!
The first step in the GerritHub flow is registering as a CUE contributor and configuring your environment. Here is a checklist of the required steps to follow:
- Step 0: Review the guidelines on Good Commit Messages, The Review Process and Miscellaneous Topics
- Step 1: Decide which email address you want to use for contributions.
- Step 2: Set up a GerritHub account.
- Step 3: Install
git-codereview - Step 4: Clone the CUE repository locally.
We cover steps 1-4 in more detail below.
A contribution to CUE is made through a specific e-mail address. Make sure to use the same account throughout the process and for all your subsequent contributions. You may need to decide whether to use a personal address or a corporate address. The choice will depend on who will own the copyright for the code that you will be writing and submitting. You might want to discuss this topic with your employer before deciding which account to use.
You also need to make sure that your git tool is configured to create commits
using your chosen e-mail address. You can either configure Git globally (as a
default for all projects), or locally (for a single specific project). You can
check the current configuration with this command:
$ git config --global user.email # check current global config
$ git config user.email # check current local configTo change the configured address:
$ git config --global user.email [email protected] # change global config
$ git config user.email [email protected] # change local configIf you have not used GerritHub before, setting up an account is a simple process:
- Visit GerritHub.
- Click "First Time Sign In".
- Click the green "Sign In" button, to sign in using your GitHub credentials.
- When prompted "Which level of GitHub access do you need?", choose "Default" and then click "Login."
- Click "Authorize gerritforge-ltd" on the GitHub auth page.
- Confirm account profile details and click "Next."
If you want to use SSH for authentication, SSH keys can be configured in your user profile.
For HTTP Credentials, generate a password via your user
profile. Then use an
existing HTTP authentication mechanism like .netrc, macOS KeyChain, or some
other credential helper. If you have
any troubles with this step, please raise an
issue.
Changes to CUE must be reviewed before they are accepted, no matter who makes
the change. A custom git command called git-codereview simplifies sending
changes to Gerrit.
Install the git-codereview command by running,
$ go install golang.org/x/review/git-codereview@masterMake sure git-codereview is installed in your shell PATH, so that the
git command can find it.
Check that
$ git codereview helpprints help text, not an error.
On Windows, when using git-bash you must make sure that git-codereview.exe is
in your git exec-path. Run git --exec-path to discover the right location
then create a symbolic link or just copy the executable from $GOPATH/bin to this
directory.
Visit https://review.gerrithub.io/admin/repos/cue-lang/cue, then click "SSH" or
"HTTP" depending on which authentication mechanism you configured in step 2.
Then copy and run the corresponding "Clone" command. Make sure not to use
"ANONYMOUS HTTP", as that will not work with git-codereview command.
Sending a change via GerritHub is quite different to the GitHub PR flow. At first the differences might be jarring, but with practice the workflow is incredibly intuitive and far more powerful when it comes to chains of "stacked" changes.
With a working directory of your local clone of the CUE repository, run the tests:
$ go test ./...Each CUE change must be made in a branch, created from the master branch. You
can use the normal git commands to create a branch and stage changes:
$ git checkout -b mybranch
$ [edit files...]
$ git add [files...]To commit changes, instead of git commit -s, use git codereview change -s.
$ git codereview change -s
(opens $EDITOR)You can edit the commit description in your favorite editor as usual. The
git codereview change command will automatically add a unique Change-Id
line near the bottom. That line is used by Gerrit to match successive uploads
of the same change. Do not edit or delete it. A Change-Id looks like this:
Change-Id: I2fbdbffb3aab626c4b6f56348861b7909e3e8990
The git-codereview command also checks that you've run go fmt over the
source code, and that the commit message follows the suggested format.
If you need to edit the files again, you can stage the new changes and re-run
git codereview change -s: each subsequent run will amend the existing commit
while preserving the Change-Id.
Make sure that you always keep a single commit in each branch. If you add more
commits by mistake, you can use git rebase to squash them
together
into a single one.
You've written and tested your code, but before sending code out for review, run all the tests for the whole tree to ensure the changes don't break other packages or programs:
$ go test ./...Once the change is ready and tested over the whole tree, send it for review.
This is done with the mail sub-command which, despite its name, doesn't
directly mail anything; it just sends the change to Gerrit:
$ git codereview mailGerrit assigns your change a number and URL, which git codereview mail will
print, something like:
remote: New Changes:
remote: https://review.gerrithub.io/99999 math: improved Sin, Cos and Tan precision for very large arguments
If you get an error instead, see the "Troubleshooting mail errors".
CUE maintainers will review your code on Gerrit, and you will get notifications via e-mail. You can see the review on Gerrit and comment on them there. You can also reply using e-mail if you prefer.
If you need to revise your change after the review, edit the files in the same
branch you previously created, add them to the Git staging area, and then amend
the commit with git codereview change:
$ git codereview change -s # amend current commit
(open $EDITOR)
$ git codereview mail # send new changes to GerritIf you don't need to change the commit description, just save and exit from the
editor. Remember not to touch the special Change-Id line.
Again, make sure that you always keep a single commit in each branch. If you
add more commits by mistake, you can use git rebase to squash them
together
into a single one.
With the review cycle complete, the CI checks green and your CL approved with
+2, it will be submitted. Congratulations! You will have made your first
contribution to the CUE project.
Commit messages in CUE follow a specific set of conventions, which we discuss in this section.
Here is an example of a good one:
cue/ast/astutil: fix resolution bugs
This fixes several bugs and documentation bugs in
identifier resolution.
1. Resolution in comprehensions would resolve identifiers
to themselves.
2. Label aliases now no longer bind to references outside
the scope of the field. The compiler would catch this invalid
bind and report an error, but it is better not to bind in the
first place.
3. Remove some more mentions of Template labels.
4. Documentation for comprehensions was incorrect
(Scope and Node were reversed).
5. Aliases X in `X=[string]: foo` should only be visible
in foo.
Fixes #946
The first line of the change description is conventionally a short one-line
summary of the change, prefixed by the primary affected package
(cue/ast/astutil in the example above).
A rule of thumb is that it should be written so to complete the sentence "This change modifies CUE to ____." That means it does not start with a capital letter, is not a complete sentence, and actually summarizes the result of the change.
Follow the first line by a blank line.
The rest of the description elaborates and should provide context for the change and explain what it does. Write in complete sentences with correct punctuation, just like for your comments in CUE. Don't use HTML, Markdown, or any other markup language.
The special notation "Fixes #12345" associates the change with issue 12345 in the CUE issue tracker When this change is eventually applied, the issue tracker will automatically mark the issue as fixed.
If the change is a partial step towards the resolution of the issue, uses the notation "Updates #12345". This will leave a comment in the issue linking back to the change in Gerrit, but it will not close the issue when the change is applied.
If you are sending a change against a subrepository, you must use the fully-qualified syntax supported by GitHub to make sure the change is linked to the issue in the main repository, not the subrepository. All issues are tracked in the main repository's issue tracker. The correct form is "Fixes #159".
This section explains the review process in detail and how to approach reviews after a change has been sent to either GerritHub or GitHub.
When a change is sent to Gerrit, it is usually triaged within a few days. A maintainer will have a look and provide some initial review that for first-time contributors usually focuses on basic cosmetics and common mistakes. These include things like:
- Commit message not following the suggested format.
- The lack of a linked GitHub issue. The vast majority of changes require a linked issue that describes the bug or the feature that the change fixes or implements, and consensus should have been reached on the tracker before proceeding with it. Gerrit reviews do not discuss the merit of the change, just its implementation. Only trivial or cosmetic changes will be accepted without an associated issue.
After an initial reading of your change, maintainers will trigger CI checks,
that run a full test suite and unity
checks. Most CI tests complete in a few minutes, at which point a link will be
posted in Gerrit where you can see the results, or if you are submitting a PR
results are presented as checks towards the bottom of the PR.
If any of the CI checks fail, follow the link and check the full logs. Try to understand what broke, update your change to fix it, and upload again. Maintainers will trigger a new CI run to see if the problem was fixed.
The CUE community values very thorough reviews. Think of each review comment like a ticket: you are expected to somehow "close" it by acting on it, either by implementing the suggestion or convincing the reviewer otherwise.
After you update the change, go through the review comments and make sure to reply to every one. In GerritHub you can click the "Done" button to reply indicating that you've implemented the reviewer's suggestion and in GitHub you can mark a comment as resolved; otherwise, click on "Reply" and explain why you have not, or what you have done instead.
It is perfectly normal for changes to go through several round of reviews, with one or more reviewers making new comments every time and then waiting for an updated change before reviewing again. This cycle happens even for experienced contributors, so don't be discouraged by it.
As they near a decision, reviewers will make a "vote" on your change. The Gerrit voting system involves an integer in the range -2 to +2:
- +2 The change is approved for being merged. Only CUE maintainers can cast a +2 vote.
- +1 The change looks good, but either the reviewer is requesting minor changes before approving it, or they are not a maintainer and cannot approve it, but would like to encourage an approval.
- -1 The change is not good the way it is but might be fixable. A -1 vote will always have a comment explaining why the change is unacceptable.
- -2 The change is blocked by a maintainer and cannot be approved. Again, there will be a comment explaining the decision.
When reviewing a PR, a reviewer will indicate the nature of their response:
- Comments - general feedback without explicit approval.
- Approve - feedback and approval for this PR to accepted and submitted in GerritHub.
- Request changes - feedback that must be addressed before this PR can proceed.
After the code has been +2'ed in GerritHub or "Approved" in GitHub, an
approver will apply it to the master branch using the Gerrit user interface.
This is called "submitting the change".
The two steps (approving and submitting) are separate because in some cases maintainers may want to approve it but not to submit it right away (for instance, the tree could be temporarily frozen).
Submitting a change checks it into the repository. The change description will include a link to the code review, which will be updated with a link to the change in the repository. Since the method used to integrate the changes is Git's "Cherry Pick", the commit hashes in the repository will be changed by the submit operation.
If your change has been approved for a few days without being submitted, feel free to write a comment in GerritHub or GitHub requesting submission.
This section collects a number of other comments that are outside the issue/edit/code review/submit process itself.
Files in the CUE repository don't list author names, both to avoid clutter and
to avoid having to keep the lists up to date. Instead, your name will appear in
the change log
and in the CONTRIBUTORS file and perhaps the
AUTHORS file. These files are automatically generated from the
commit logs periodically. The AUTHORS file defines who
“The CUE Authors”—the copyright holders—are.
New files that you contribute should use the standard copyright header:
// Copyright 2018 The CUE Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
(Use the current year if you're reading this in 2019 or beyond.) Files in the repository are copyrighted the year they are added. Do not update the copyright year on files that you change.
The most common way that the git codereview mail command fails is because
the e-mail address in the commit does not match the one that you used during the
registration process.
If you see something like...
remote: Processing changes: refs: 1, done
remote:
remote: ERROR: In commit ab13517fa29487dcf8b0d48916c51639426c5ee9
remote: ERROR: author email address XXXXXXXXXXXXXXXXXXX
remote: ERROR: does not match your user account.
you need to configure Git for this repository to use the e-mail address that you registered with. To change the e-mail address to ensure this doesn't happen again, run:
$ git config user.email [email protected]Then change the commit to use this alternative e-mail address with this command:
$ git commit --amend --author="Author Name <[email protected]>"Then retry by running:
$ git codereview mailRunning go test ./... for every single change to the code tree is burdensome.
Even though it is strongly suggested to run it before sending a change, during
the normal development cycle you may want to compile and test only the package
you are developing.
In this section, we'll call the directory into which you cloned the CUE
repository $CUEDIR. As CUE uses Go modules, The cue tool built by go install will be installed in the bin/go in your home directory by default.
If you're changing the CUE APIs or code, you can test the results in just this package directory.
$ cd $CUEDIR/cue
$ [make changes...]
$ go testYou don't need to build a new cue tool to test it. Instead you can run the tests from the root.
$ cd $CUEDIR
$ go test ./...To use the new tool you would still need to build and install it.
You can specify a reviewer or CC interested parties using the -r or -cc
options. Both accept a comma-separated list of e-mail addresses:
$ git codereview mail -r [email protected] -cc [email protected],[email protected]While you were working, others might have submitted changes to the repository. To update your local branch, run
$ git codereview sync(Under the covers this runs
git pull -r.)
As part of the review process reviewers can propose changes directly (in the GitHub workflow this would be someone else attaching commits to a pull request).
You can import these changes proposed by someone else into your local Git repository. On the Gerrit review page, click the "Download ▼" link in the upper right corner, copy the "Checkout" command and run it from your local Git repo. It will look something like this:
$ git fetch https://review.gerrithub.io/a/cue-lang/cue refs/changes/67/519567/1 && git checkout FETCH_HEADTo revert, change back to the branch you were working in.
The git-codereview command can be run directly from the shell
by typing, for instance,
$ git codereview syncbut it is more convenient to set up aliases for git-codereview's own
subcommands, so that the above becomes,
$ git syncThe git-codereview subcommands have been chosen to be distinct from Git's own,
so it's safe to define these aliases. To install them, copy this text into your
Git configuration file (usually .gitconfig in your home directory):
[alias]
change = codereview change
gofmt = codereview gofmt
mail = codereview mail
pending = codereview pending
submit = codereview submit
sync = codereview sync
Advanced users may want to stack up related commits in a single branch. Gerrit allows for changes to be dependent on each other, forming such a dependency chain. Each change will need to be approved and submitted separately but the dependency will be visible to reviewers.
To send out a group of dependent changes, keep each change as a different commit under the same branch, and then run:
$ git codereview mail HEADMake sure to explicitly specify HEAD, which is usually not required when
sending single changes.
This is covered in more detail in the Gerrit documentation.
Earlier in this guide we explained the role the Developer Certificate of
Origin plays in contributions to the CUE
project. we also explained how git commit -s can be used to sign-off each
commit. But:
- it's easy to forget the
-sflag; - it's not always possible/easy to fix up other tools that wrap the
git commitstep.
You can automate the sign-off step using a git
hook. Run the
following commands in the root of a git repository where you want to
automatically sign-off each commit:
cat <<'EOD' > .git/hooks/prepare-commit-msg
#!/bin/sh
NAME=$(git config user.name)
EMAIL=$(git config user.email)
if [ -z "$NAME" ]; then
echo "empty git config user.name"
exit 1
fi
if [ -z "$EMAIL" ]; then
echo "empty git config user.email"
exit 1
fi
git interpret-trailers --if-exists doNothing --trailer \
"Signed-off-by: $NAME <$EMAIL>" \
--in-place "$1"
EOD
chmod +x .git/hooks/prepare-commit-msg
If you already have a prepare-commit-msg hook, adapt it accordingly. The -s
flag will now be implied every time a commit is created.
Guidelines for participating in CUE community spaces and a reporting process for handling issues can be found in the Code of Conduct.