Async_AdvancedWebServer.ino

/****************************************************************************************************************************
  Async_AdvancedWebServer.ino - Dead simple AsyncWebServer for STM32 LAN8720 or built-in LAN8742A Ethernet
  
  For STM32 with LAN8720 (STM32F4/F7) or built-in LAN8742A Ethernet (Nucleo-144, DISCOVERY, etc)
  
  AsyncWebServer_STM32 is a library for the STM32 with LAN8720 or built-in LAN8742A Ethernet WebServer
  
  Based on and modified from ESPAsyncWebServer (https://github.com/me-no-dev/ESPAsyncWebServer)
  Built by Khoi Hoang https://github.com/khoih-prog/AsyncWebServer_STM32
  Licensed under MIT license
  
  Copyright (c) 2015, Majenko Technologies
  All rights reserved.
  
  Redistribution and use in source and binary forms, with or without modification,
  are permitted provided that the following conditions are met:
  
  Redistributions of source code must retain the above copyright notice, this
  list of conditions and the following disclaimer.
  
  Redistributions in binary form must reproduce the above copyright notice, this
  list of conditions and the following disclaimer in the documentation and/or
  other materials provided with the distribution.
  
  Neither the name of Majenko Technologies nor the names of its
  contributors may be used to endorse or promote products derived from
  this software without specific prior written permission.
  
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************************************************************/
/*
   Currently support
   1) STM32 boards with built-in Ethernet (to use USE_BUILTIN_ETHERNET = true) such as :
      - Nucleo-144 (F429ZI, F767ZI)
      - Discovery (STM32F746G-DISCOVERY)
      - STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash, with Built-in Ethernet, 
      - See How To Use Built-in Ethernet at (https://github.com/khoih-prog/EthernetWebServer_STM32/issues/1)
   2) STM32F/L/H/G/WB/MP1 boards (with 64+K Flash) running ENC28J60 shields (to use USE_BUILTIN_ETHERNET = false)
   3) STM32F/L/H/G/WB/MP1 boards (with 64+K Flash) running W5x00 shields
   4) STM32F4 and STM32F7 boards (with 64+K Flash) running LAN8720 shields
*/

#if !( defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3)  ||defined(STM32F4) || defined(STM32F7) || \
       defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32H7)  ||defined(STM32G0) || defined(STM32G4) || \
       defined(STM32WB) || defined(STM32MP1) )
  #error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.
#endif

#define _ASYNCWEBSERVER_STM32_LOGLEVEL_       4

#if defined(STM32F0)
  #warning STM32F0 board selected
  #define BOARD_TYPE  "STM32F0"
#elif defined(STM32F1)
  #warning STM32F1 board selected
  #define BOARD_TYPE  "STM32F1"
#elif defined(STM32F2)
  #warning STM32F2 board selected
  #define BOARD_TYPE  "STM32F2"
#elif defined(STM32F3)
  #warning STM32F3 board selected
  #define BOARD_TYPE  "STM32F3"
#elif defined(STM32F4)
  #warning STM32F4 board selected
  #define BOARD_TYPE  "STM32F4"
#elif defined(STM32F7)
  #warning STM32F7 board selected
  #define BOARD_TYPE  "STM32F7"
#elif defined(STM32L0)
  #warning STM32L0 board selected
  #define BOARD_TYPE  "STM32L0"
#elif defined(STM32L1)
  #warning STM32L1 board selected
  #define BOARD_TYPE  "STM32L1"
#elif defined(STM32L4)
  #warning STM32L4 board selected
  #define BOARD_TYPE  "STM32L4"
#elif defined(STM32H7)
  #warning STM32H7 board selected
  #define BOARD_TYPE  "STM32H7"
#elif defined(STM32G0)
  #warning STM32G0 board selected
  #define BOARD_TYPE  "STM32G0"
#elif defined(STM32G4)
  #warning STM32G4 board selected
  #define BOARD_TYPE  "STM32G4"
#elif defined(STM32WB)
  #warning STM32WB board selected
  #define BOARD_TYPE  "STM32WB"
#elif defined(STM32MP1)
  #warning STM32MP1 board selected
  #define BOARD_TYPE  "STM32MP1"
#else
  #warning STM32 unknown board selected
  #define BOARD_TYPE  "STM32 Unknown"
#endif

#ifndef BOARD_NAME
  #define BOARD_NAME    BOARD_TYPE
#endif

#define SHIELD_TYPE     "LAN8742A built-in Ethernet"

#include <LwIP.h>
#include <STM32Ethernet.h>
#include <AsyncWebServer_STM32.h>

// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC      20

byte mac[][NUMBER_OF_MAC] =
{
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x01 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x02 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x03 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x04 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x05 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x06 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x07 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x08 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x09 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0A },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0B },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0C },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0D },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0E },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0F },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x10 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x11 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x12 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x13 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x14 },
};
// Select the IP address according to your local network
IPAddress ip(192, 168, 2, 232);

AsyncWebServer    server(80);

int reqCount = 0;                // number of requests received

const int led = 13;

void handleRoot(AsyncWebServerRequest *request)
{
  digitalWrite(led, 1);

#define BUFFER_SIZE     400

  char temp[BUFFER_SIZE];
  int sec = millis() / 1000;
  int min = sec / 60;
  int hr = min / 60;
  int day = hr / 24;

  snprintf(temp, BUFFER_SIZE - 1,
           "<html>\
<head>\
<meta http-equiv='refresh' content='5'/>\
<title>AsyncWebServer-%s</title>\
<style>\
body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }\
</style>\
</head>\
<body>\
<h2>AsyncWebServer_STM32!</h2>\
<h3>running on %s</h3>\
<p>Uptime: %d d %02d:%02d:%02d</p>\
<img src=\"/test.svg\" />\
</body>\
</html>", BOARD_NAME, BOARD_NAME, day, hr % 24, min % 60, sec % 60);

  request->send(200, "text/html", temp);

  digitalWrite(led, 0);
}

void handleNotFound(AsyncWebServerRequest *request)
{
  digitalWrite(led, 1);
  String message = "File Not Found\n\n";

  message += "URI: ";
  message += request->url();
  message += "\nMethod: ";
  message += (request->method() == HTTP_GET) ? "GET" : "POST";
  message += "\nArguments: ";
  message += request->args();
  message += "\n";

  for (uint8_t i = 0; i < request->args(); i++)
  {
    message += " " + request->argName(i) + ": " + request->arg(i) + "\n";
  }

  request->send(404, "text/plain", message);
  digitalWrite(led, 0);
}

void drawGraph(AsyncWebServerRequest *request)
{
  String out;

  out.reserve(3000);
  char temp[70];
  
  out += "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" width=\"310\" height=\"150\">\n";
  out += "<rect width=\"310\" height=\"150\" fill=\"rgb(250, 230, 210)\" stroke-width=\"2\" stroke=\"rgb(0, 0, 0)\" />\n";
  out += "<g stroke=\"blue\">\n";
  int y = rand() % 130;

  for (int x = 10; x < 300; x += 10)
  {
    int y2 = rand() % 130;
    sprintf(temp, "<line x1=\"%d\" y1=\"%d\" x2=\"%d\" y2=\"%d\" stroke-width=\"2\" />\n", x, 140 - y, x + 10, 140 - y2);
    out += temp;
    y = y2;
  }
  out += "</g>\n</svg>\n";

  request->send(200, "image/svg+xml", out);
}


void setup(void)
{
  pinMode(led, OUTPUT);
  digitalWrite(led, 0);

  Serial.begin(115200);
  while (!Serial);

  delay(200);

  Serial.print("\nStart Async_AdvancedWebServer_STM32 on "); Serial.print(BOARD_NAME);
  Serial.print(" with "); Serial.println(SHIELD_TYPE);
  Serial.println(ASYNC_WEBSERVER_STM32_VERSION);

#if (_ASYNCWEBSERVER_STM32_LOGLEVEL_ > 2)
  Serial.print("STM32 Core version v"); Serial.print(STM32_CORE_VERSION_MAJOR);
  Serial.print("."); Serial.print(STM32_CORE_VERSION_MINOR); 
  Serial.print("."); Serial.println(STM32_CORE_VERSION_PATCH);
#endif

  // start the ethernet connection and the server
  // Use random mac
  uint16_t index = millis() % NUMBER_OF_MAC;

  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  // Use DHCP dynamic IP and random mac
  Ethernet.begin(mac[index]);

  server.on("/", HTTP_GET, [](AsyncWebServerRequest * request)
  {
    handleRoot(request);
  });

  server.on("/test.svg", HTTP_GET, [](AsyncWebServerRequest * request)
  {
    drawGraph(request);
  });

  server.on("/inline", [](AsyncWebServerRequest * request)
  {
    request->send(200, "text/plain", "This works as well");
  });

  server.onNotFound(handleNotFound);

  server.begin();

  Serial.print(F("HTTP EthernetWebServer is @ IP : "));
  Serial.println(Ethernet.localIP());
}

void loop(void)
{
}