leftside.conf

conky.config = {
    background = true,

    own_window_argb_visual = true,
    own_window_type = 'dock',
    own_window = true,
    own_window_transparent = false,
    own_window_hints = 'undecorated,below,sticky,skip_taskbar,skip_pager',

    double_buffer = true,
    override_utf8_locale = true,
    use_xft = true,
    font = 'DejaVu Sans Mono:size=10',
    xftalpha = 1.0,
    update_interval = 0.5,
    update_interval_on_battery = 2,
    uppercase = false,
    default_outline_color = 'black',
    default_shade_color = 'black',
    draw_borders = false,
    draw_graph_borders = true,
    draw_outline = false,
    draw_shades = false,
    temperature_unit = 'celsius',

    text_buffer_size = 256,-- 256 is minimum
    no_buffers = true,
    short_units = true,
    pad_percents = 2,
    top_name_width = 26,

    alignment = 'middle_left',
    gap_x = 10,
    gap_y = 0,

    minimum_width = 230, minimum_height = 5,
    maximum_width = 500,

    color0 = 'BBBBBB', -- light_grey
    color1 = '00B386', -- teal
    color2 = 'F44336', -- red
    color3 = 'FF9800', -- orange
    color4 = 'FFEB3B', -- yellow
    color5 = '8BC34A', -- light_green
    color6 = '4CAF50', -- green

    own_window_argb_value = 160,
    own_window_colour = '000000',

     lua_load = '~/.config/conky/luaFunc.lua'
};

conky.text = [[
${font Noto Sans Mono:size=12}${color0}SERVERS${font} ${color1}$hr
${if_match "${execi 10 cat ~/.config/conky/show_servers}"=="on"}
# Replace with your own servers
 ${color0}HTTP(S):
   ╠ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╠ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╠ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╠ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╠ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╚ example${alignr}${if_match "${texeci 60 curl --connect-timeout 3 -sL https://kescher.at/ -w '%{http_code}' -o /dev/null}"=="200"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
 ${color0}Ping:
   ╠ example${alignr}${if_match "${texeci 60 ~/.config/conky/pingtest kescher.at}" == "Up"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
   ╚ example${alignr}${if_match "${texeci 60 ~/.config/conky/pingtest kescher.at}" == "Up"}${color1}Up${else}${alignr}${color2}Down?${endif}${color0}${font}
${else}
# Adjust line count according to what you have above so it stays aligned when you hide the server list




${color2}${alignc}Server status disabled





${endif}
${font Noto Sans Mono:size=12}${color0}DISK USAGE${font} ${color1}$hr${color0}
# Adjust the below for your own disk id and mount points

 /${color1}${alignr}${fs_used /}/${fs_size /}
 ${fs_bar 10 /}
# Adjust the value below to get your disk temperature.
# for non-NVMe SSDs and HDDs, you can use an hddtemp daemon.
# for NVMe SSDs, you will need Linux 5.5 and up in order to have a temperature reading exposed in hwmon.
 ${color0}Disk temperature:${alignr}${color1}${hwmon 1 temp 2}°C

 ${color0}Read: ${color1}${diskio_read /dev/disk/by-id/nvme-KBG30ZMV512G_TOSHIBA_Y89PD562PZYP}/s ${alignr}${color0}Write: ${color1}${diskio_write /dev/disk/by-id/nvme-KBG30ZMV512G_TOSHIBA_Y89PD562PZYP}/s
 ${color1}${diskiograph_read /dev/disk/by-id/nvme-KBG30ZMV512G_TOSHIBA_Y89PD562PZYP 50,100 00592f 00b386 -t -l} ${alignr}${diskiograph_write /dev/disk/by-id/nvme-KBG30ZMV512G_TOSHIBA_Y89PD562PZYP 50,100 00592f 00b386 -t -l}
 ${color0}${top_io name 1}
 ${top_io name 2}
 ${top_io name 3}
 ${top_io name 4}
 ${top_io name 5}

${font Noto Sans Mono:size=12}${color0}NETWORK INTERFACES${font} ${color1}$hr

# Number is maximum amount of interfaces to be shown
${lua_parse drawnetworks 2}\
]];