Releases: kamilsss655/uv-k5-firmware-custom
Releases · kamilsss655/uv-k5-firmware-custom
release v.17.3
🗲FLASH WITH A BROWSER🗲
Fixes:
- fix #52 switching from channel mode to VFO does not tune to the correct frequency shown
- fix: rxagc was not being loaded at boot, but only after first squelch open in main app
release v.17.2
🗲FLASH WITH A BROWSER🗲
This is an experimental release focused on some adjustments to AGC based on the awesome feedback I've received from users.
Please test it and let me know if something has improved or changed to worse.
Changes:
- Now
FM
andUSB
modulations have dedicatedFAST
andSLOW
AGC settings that match stock values. Previous change was applyingAM
AGC values to these modulations which likely lowered the sensitivity onFM
andUSB
modulations. This change should fix that - Removed some
RSSI table
registry setting which is undocumented, it seems that displayed values of RSSI are now higher - AGC fix index has been switched from
MAX
toMIN
- what it means? I have no idea since it is undocumented, but maybe it fixes something - Changed the 4 gain step settings AGC uses from stock to the ones provided by 1o11 in am fix
release v.17.1
🗲FLASH WITH A BROWSER🗲
Features:
- New
RxAGC
menu setting allows to configure built in AGC which applies to all the modulations:OFF
- completely disables AGC, this might be useful for receiving the most faint signals, with maximum set gain the AGC will not clamp down signal, note: this might cause radio freeze if the received signal is too strong and overloads the radioSLOW
- provides wide dynamic range, works really well overall and is the default setting, might be especially useful for HF AM broadcast stations that broadcast music etc.FAST
- lower dynamic range, might be useful for short voice communication, aviation, where understanding every word is crucial etc.
- The new
SLOW
andFAST
settings might protect radio from freezes caused by reception of strong signals (happy to hear from the users who have experienced this issue)
Changes:
- Removed from the
MENU
:SList
- no use caseSList1
- no use caseSList2
- no use caseMicBar
- now it's always onAM_FIX
- it is no longer needed 😄
BatSav
setting values displayed as%
UNBLOCK ALL
option is completely removed, to make radio more safe by default
release v.17
🗲FLASH WITH A BROWSER🗲
Features:
- ✨ ✨ AM AGC has been fixed! ✨ ✨
- now AM demodulation is a completely different experience, audio is crisp, no audible gain switching steps etc.
- you can test it by simply switching
AM Fix
inMENU
toOFF
Fixes:
- fixed issue where radio wouldn't emit 55Hz tail tone
release v.16.5
🗲FLASH WITH A BROWSER🗲
Fixes:
- spectrum channel mode:
- fixes a bug where last valid memory channel was phantom displayed, as it only appeared when its RSSI crossed the RSSI trigger line, now last channel is properly displayed
- fixes a bug where last 200 channel was not being scanned
- fixes a bug where random frequency would sometimes appear when scanning 200 channels
- fixes #39 battery calibration
- fixes #38 power settings reset after TX
Minor code changes:
- imported changes from:
release v.16.4
🗲FLASH WITH A BROWSER🗲
Features:
- #28 added new assignable function key options:
SPECTRUM
- runs spectrumSWITCH BANDWIDTH
- switches current bandwidth
- #27 TX is disabled when
RX_OFFSET
is set to protect the upconverter
Fixes:
- potential memory allocation fix to spectrum channel mode
release v.16.3
🗲FLASH WITH A BROWSER🗲
Fixes:
- screen glitch on transmit has been fixed
6.25k
bandwidth was wider than8.33k
bandwidth so their values have been swapped
release v.16.2
🗲FLASH WITH A BROWSER🗲
Changes:
- filter bandwidths are unified across main app and spectrum, now main app uses same filters as the spectrum, before they were only using the same names so users were unaware of this issue, this should result in slighly narrower 25k, 12.5k filters in the main app mode
Reverted:
- based on user reports of weakened sensitivity on AM with the v.16, the dynamic filters are now disabled for AM modulation, and also in spectrum, now they work in USB, FM and only in the VFO and MEMORY modes
- AM desired RSSI has been reverted to match versions prior v.16 as old version shows better results in AM mode
Fixes:
- spectrum channel mode displays correct rssi bars based on current filter, before the rrsi displayed bar and rssi activated bar was different and the user had to tune much higher with the rssi trigger line, this should allow the user to keep rssi trigger line lower and thus improve ability to receive weak signals
- spectrum bandwidth change with button works immediately, before it was delayed
release v.16.1
🗲FLASH WITH A BROWSER🗲
Fixes:
- Fixed a bug introduced with latest release with
STEP
not working correctly
release v.16
🗲FLASH WITH A BROWSER🗲
Features
- New filter bandwidths (thanks to @spm81):
- 8.33kHz
- 6.25kHz
- 5kHz
Improvements:
- Squelch is now more sensitive in HF bands
- Improved reception of weak signals due to dynamic filter bandwidths which auto lower bandwidth when signal received is low
- S-level meter changes:
- calibrated for all the bands (S1 on all bands, max gain, no antenna) to better indicate relative signal strength
- unified so now main app as well as spectrum show the same values
Changes:
W/N
menu moved to position 2 and renamed toBandw
- Bandwidth is displayed in a new format ie.
12.5k
instead ofN