[QUESTION/HELP] I am trying to reach my home network without any luck

[groenator]

I created my k3d cluster, spin up my pods. Everything works fine. I notice thou, when a pod tries to connect to an external device from my local network is not able to do so. I run a few tests inside the pod, and it seems that whatever request I sent to 192.168.1.0 (which is my home network) is not working. I even tried to ping 8.8.8.8, which to my surprise it worked.

The pod seems that it cannot find the host.

Is there a way how to enable access to other networks?

 # wget -O- http://192.168.1.1
Connecting to 192.168.1.1 (192.168.1.1:80)

Trying to traceroute my router

traceroute 192.168.1.1
traceroute to 192.168.1.1 (192.168.1.1), 30 hops max, 46 byte packets
 1  192.168.142.0 (192.168.142.0)  0.007 ms  0.007 ms  0.003 ms
 2  *  *  *
 3  *  *  *

It seems able to reach google servers

traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 46 byte packets
 1  192.168.142.0 (192.168.142.0)  0.010 ms  0.009 ms  0.003 ms
 2  host.k3d.internal (172.27.0.1)  0.008 ms  0.008 ms  0.006 ms
 3  192.168.1.1 (192.168.1.1)  1.121 ms  1.971 ms  0.977 ms

The route inside the pod:

route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         169.254.1.1     0.0.0.0         UG    0      0        0 eth0
169.254.1.1     0.0.0.0         255.255.255.255 UH    0      0        0 eth0

This pod should have a route to the bridge network, it seems it doesn't have one. Why is not the route enabled? What am I missing here?

[groenator]

I found the issue, I had to disable the internal network policy which k3s enables by default using --disable-network-policy. Adding this argument when I build the cluster works. Now, I can ping my internal network easily.