AC split FTXM20R & FTXM25R -More entities & set options #324

Barni61 · 2024-10-18T07:51:20Z

Barni61
Oct 18, 2024

In the front-end in HA for the AC I see a values I can manage there, but I don't see them as entities, nor can I set them in an action.
Attached you'll find a screenshot.

In the debug-log I see the commands:

DEBUG (MainThread) [custom_components.daikin_onecta.climate] Device 'AC Nymphen' request to set fan_mode to quiet
INFO (MainThread) [custom_components.daikin_onecta.device] Path: /v1/gateway-devices/<API>/management-points/climateControl/characteristics/fanControl , options: {"value": "quiet", "path": "/operationModes/heating/fanSpeed/currentMode"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER REQUEST URL: https://api.onecta.daikineurope.com/v1/gateway-devices/<API>/management-points/climateControl/characteristics/fanControl
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER TYPE PATCH JSON: {"value": "quiet", "path": "/operationModes/heating/fanSpeed/currentMode"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER RESPONSE CODE: 204 LIMIT: {'minute': 20, 'day': 200, 'remaining_minutes': 19, 'remaining_day': 171, 'retry_after': 0, 'ratelimit_reset': 15}
DEBUG (MainThread) [custom_components.daikin_onecta.device] RES IS True
DEBUG (MainThread) [custom_components.daikin_onecta.climate] Device 'AC Nymphen' request to set fan_mode to auto
INFO (MainThread) [custom_components.daikin_onecta.device] Path: /v1/gateway-devices/<API>/management-points/climateControl/characteristics/fanControl , options: {"value": "auto", "path": "/operationModes/heating/fanSpeed/currentMode"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER REQUEST URL: https://api.onecta.daikineurope.com/v1/gateway-devices/<API>/management-points/climateControl/characteristics/fanControl
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER TYPE PATCH JSON: {"value": "auto", "path": "/operationModes/heating/fanSpeed/currentMode"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER RESPONSE CODE: 204 LIMIT: {'minute': 20, 'day': 200, 'remaining_minutes': 17, 'remaining_day': 170, 'retry_after': 0, 'ratelimit_reset': 3}
DEBUG (MainThread) [custom_components.daikin_onecta.device] RES IS True
INFO (MainThread) [custom_components.daikin_onecta.device] Path: /v1/gateway-devices/<API>/management-points/climateControl/characteristics/temperatureControl , options: {"value": 22.0, "path": "/operationModes/heating/setpoints/roomTemperature"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER REQUEST URL: https://api.onecta.daikineurope.com/v1/gateway-devices/<API>/management-points/climateControl/characteristics/temperatureControl
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER TYPE PATCH JSON: {"value": 22.0, "path": "/operationModes/heating/setpoints/roomTemperature"}
DEBUG (MainThread) [custom_components.daikin_onecta.daikin_api] BEARER RESPONSE CODE: 204 LIMIT: {'minute': 20, 'day': 200, 'remaining_minutes': 19, 'remaining_day': 169, 'retry_after': 0, 'ratelimit_reset': 60}
DEBUG (MainThread) [custom_components.daikin_onecta.device] RES IS True
INFO (MainThread) [custom_components.daikin_onecta.climate] Device 'AC Nymphen': roomTemperature operation mode heating has setpoint {'settable': True, 'value': 21, 'unit': '°C', 'stepValue': 0.5, 'minValue': 10, 'maxValue': 31}

jwillemsen · 2024-10-18T07:54:52Z

jwillemsen
Oct 18, 2024
Maintainer

The log shows that some commands are send to the device, can you be more concrete in which values you want to set? Please download and attach the integration diagnostics from HA so that I can see all raw data. Can you change the values you want from the Daikin Onecta app?

0 replies

Barni61 · 2024-10-18T08:07:06Z

Barni61
Oct 18, 2024
Author

Hi Johnny, That’s interesting never checked for the diagnostic information for a device. My main problem is my wife 😉 She always set the fan on max and heating on 24°C, which is power consuming and of no use! My idea is to check regularly the values and set the Fan to “Auto” and Heating to “21°C” . In the attached json file, I see all these values. It would be great to see these values as entities and be able to set them. Rgds Bernhard From: Johnny Willemsen ***@***.***> Sent: Freitag, 18. Oktober 2024 09:55 To: jwillemsen/daikin_onecta ***@***.***> Cc: Barni61 ***@***.***>; Author ***@***.***> Subject: Re: [jwillemsen/daikin_onecta] AC split FTXM20R & FTXM25R -More entities & set options (Discussion #324) The log shows that some commands are send to the device, can you be more concrete in which values you want to set? Please download and attach the integration diagnostics from HA so that I can see all raw data. Can you change the values you want from the Daikin Onecta app? — Reply to this email directly, view it on GitHub <#324 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFIU6PNPRH4SK6GRXVW73B3Z4C5GBAVCNFSM6AAAAABQFLULZSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOJYGAYTCMI> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BFIU6PPHNYVSTYAQCZRKJODZ4C5GBA5CNFSM6AAAAABQFLULZSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAU6FQ6.gif> Message ID: ***@***.*** ***@***.***> >

0 replies

jwillemsen · 2024-10-18T08:14:50Z

jwillemsen
Oct 18, 2024
Maintainer

Looks the attachment isn't there when you respond by email. You can use the climate entity for your daikin device, see https://www.home-assistant.io/integrations/climate/ for all climate features. What exactly is possible depends on your daikin device.

0 replies

jwillemsen · 2024-10-18T08:18:27Z

jwillemsen
Oct 18, 2024
Maintainer

See https://github.com/jwillemsen/daikin_onecta/wiki for some example automations, they are made for a Daikin Altherma, but that is also a climate entity in HA

0 replies

Barni61 · 2024-10-18T09:58:24Z

Barni61
Oct 18, 2024
Author

Strange, didn’t find „climate“ in the integrations But it should be there :’( Von: Johnny Willemsen ***@***.***> Gesendet: Freitag, 18. Oktober 2024 10:19 An: jwillemsen/daikin_onecta ***@***.***> Cc: Barni61 ***@***.***>; Author ***@***.***> Betreff: Re: [jwillemsen/daikin_onecta] AC split FTXM20R & FTXM25R -More entities & set options (Discussion #324) See https://github.com/jwillemsen/daikin_onecta/wiki for some example automations, they are made for a Daikin Altherma, but that is also a climate entity in HA — Reply to this email directly, view it on GitHub <#324 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFIU6PLIZZLGVRDIAXQA6O3Z4C76RAVCNFSM6AAAAABQFLULZSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOJYGAZTENY> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BFIU6PMRGNRCTHI4XX3NENDZ4C76RA5CNFSM6AAAAABQFLULZSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAU6F6O.gif> Message ID: ***@***.*** ***@***.***> >

0 replies

jwillemsen · 2024-10-18T10:15:22Z

jwillemsen
Oct 18, 2024
Maintainer

Go to settings, devices&services, select the tab entities, and in the search use climate.

0 replies

Barni61 · 2024-11-01T10:07:06Z

Barni61
Nov 1, 2024
Author

config_entry-daikin_onecta.json
Sorry for delay, but I was busy with other stuff.

You can see, that the entities are discovered and the one I want to set are marked as "setable".
Like temperature and fan speed:
"temperatureControl": {
"ref": "#temperatureControl",
"settable": true,
"value": {
"operationModes": {
"heating": {
"setpoints": {
"roomTemperature": {
"settable": true,
"value": 21,
"unit": "\u00b0C",
"stepValue": 0.5,
"minValue": 10,
"maxValue": 31
}
}
},

"fanSpeed": {
"currentMode": {
"value": "auto",
"settable": true,
"values": [
"auto",
"quiet",
"fixed"
]
},
or temp:

1 reply

jwillemsen Nov 1, 2024
Maintainer

Please enable the debug log (see readme) and attach the logs of ha

Barni61 · 2024-11-01T14:00:18Z

Barni61
Nov 1, 2024
Author

When I activate DEBUG, I see a lot of entries not belonging to DAIKIN.
How long should I've activate the debuging, till I end it?!

1 reply

jwillemsen Nov 1, 2024
Maintainer

Start and first poll to daikin

Barni61 · 2024-11-01T14:42:40Z

Barni61
Nov 1, 2024
Author

There are lot of entries for Skoda and Tuja, but a few also for Daikin ;)
home-assistant_daikin_onecta_2024-11-01T14-41-09.537Z.log

0 replies

jwillemsen · 2024-11-01T20:33:26Z

jwillemsen
Nov 1, 2024
Maintainer

See https://github.com/jwillemsen/daikin_onecta/wiki for some example automations, will check your logs next week

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

AC split FTXM20R & FTXM25R -More entities & set options #324

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 10 comments 2 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

AC split FTXM20R & FTXM25R -More entities & set options #324

Barni61 Oct 18, 2024

Replies: 10 comments · 2 replies

jwillemsen Oct 18, 2024 Maintainer

Barni61 Oct 18, 2024 Author

jwillemsen Oct 18, 2024 Maintainer

jwillemsen Oct 18, 2024 Maintainer

Barni61 Oct 18, 2024 Author

jwillemsen Oct 18, 2024 Maintainer

Barni61 Nov 1, 2024 Author

jwillemsen Nov 1, 2024 Maintainer

Barni61 Nov 1, 2024 Author

jwillemsen Nov 1, 2024 Maintainer

Barni61 Nov 1, 2024 Author

jwillemsen Nov 1, 2024 Maintainer

Barni61
Oct 18, 2024

Replies: 10 comments 2 replies

jwillemsen
Oct 18, 2024
Maintainer

Barni61
Oct 18, 2024
Author

jwillemsen
Oct 18, 2024
Maintainer

jwillemsen
Oct 18, 2024
Maintainer

Barni61
Oct 18, 2024
Author

jwillemsen
Oct 18, 2024
Maintainer

Barni61
Nov 1, 2024
Author

jwillemsen Nov 1, 2024
Maintainer

Barni61
Nov 1, 2024
Author

jwillemsen Nov 1, 2024
Maintainer

Barni61
Nov 1, 2024
Author

jwillemsen
Nov 1, 2024
Maintainer