Skip to content

Latest commit

 

History

History
41 lines (30 loc) · 1.51 KB

README.md

File metadata and controls

41 lines (30 loc) · 1.51 KB
Raw

AtlasQuad

A simple quadcopter project built on the DJI F450 quadcopter model.

Building

To build the project without debugging output, simply issue the command:

make

For debugging output, build with the command:

make DEBUG=1

Requirements

  • GCC ARM Embedded toolchain
  • [Optional] Simulink w/ SimElectronics, SimMechanics, and Simscape

Directory Layout

  • Documents - Contains various datasheets and PDFs of the Simulink model of the AtlasQuad system.
  • Simulink - Contains the Simulink model of the AtlasQuad system.
  • src - Contains all of the source code for the AtlasQuad flight controller.
    • main.cpp - The main flight controller application.
    • config.h - Contains system configurations.
    • xbeeuart.cpp/h - Contains code used to communicate to the XBee module onboard the AtlasQuad system.
    • ADXL345/ - Contains the library files developed to communicate to the ADXL345 accelerometer.
    • ITG3200/ - Contains the library files developed to communicate to the ITG3200 gyro.
    • mbed/ - Contains the sources for the Mbed platform.
    • motors/ - Contains source for motor control through the ESCs.
    • PID/ - Contains source for the PID controllers.
  • Utilities - Contains two utilities that we developed to help tune the PIDs and to command the quadcopter from a remote base station.
  • XCTU - Contains an XML file with XBee packet configurations to communicate to the AtlasQuad system through the XCTU software.

TODO