Vagrant up fails for containers demo

[ladislavmacoun]

Running vagrant up fails with this output.

22:43:28-mac@Iluvatar:DPDK_in_Containers_Hands-on_Lab$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'ubuntu/xenial64'...
==> default: Matching MAC address for NAT networking...
==> default: Setting the name of the VM: DPDK_in_Containers_Hands-on_Lab_default_1552859042685_45841
==> default: Fixed port collision for 22 => 2222. Now on port 2200.
==> default: Clearing any previously set network interfaces...
==> default: Available bridged network interfaces:
1) en0: Wi‑Fi (AirPort)
2) p2p0
3) awdl0
4) en1: Thunderbolt 1
5) bridge0
==> default: When choosing an interface, it is usually the one that is
==> default: being used to connect to the internet.
    default: Which interface should the network bridge to? 5
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 22 (guest) => 2200 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2200
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: 
    default: Vagrant insecure key detected. Vagrant will automatically replace
    default: this with a newly generated keypair for better security.
    default: 
    default: Inserting generated public key within guest...
    default: Removing insecure key from the guest if it's present...
    default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
    default: The guest additions on this VM do not match the installed version of
    default: VirtualBox! In most cases this is fine, but in rare cases it can
    default: prevent things such as shared folders from working properly. If you see
    default: shared folder errors, please make sure the guest additions within the
    default: virtual machine match the version of VirtualBox you have installed on
    default: your host and reload your VM.
    default: 
    default: Guest Additions Version: 5.1.38
    default: VirtualBox Version: 6.0
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => /Users/mac/Documents/workspace/CDN/SDN-NFV-Hands-on-Samples/DPDK_in_Containers_Hands-on_Lab
==> default: Running provisioner: shell...
    default: Running: inline script
    default: dpkg-preconfigure: unable to re-open stdin: No such file or directory
    default: Selecting previously unselected package libpython2.7-minimal:amd64.
    default: (Reading database ... 
(Reading database ... 60%abase ... 5%
    default: (Reading database ... 65%
    default: (Reading database ... 70%
    default: (Reading database ... 75%
    default: (Reading database ... 80%
    default: (Reading database ... 85%
    default: (Reading database ... 90%
    default: (Reading database ... 95%
(Reading database ... 54200 files and directories currently installed.)
    default: Preparing to unpack .../libpython2.7-minimal_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package python2.7-minimal.
    default: Preparing to unpack .../python2.7-minimal_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking python2.7-minimal (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package python-minimal.
    default: Preparing to unpack .../python-minimal_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking python-minimal (2.7.12-1~16.04) ...
    default: Selecting previously unselected package libpython2.7-stdlib:amd64.
    default: Preparing to unpack .../libpython2.7-stdlib_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package python2.7.
    default: Preparing to unpack .../python2.7_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking python2.7 (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package libpython-stdlib:amd64.
    default: Preparing to unpack .../libpython-stdlib_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking libpython-stdlib:amd64 (2.7.12-1~16.04) ...
    default: Processing triggers for man-db (2.7.5-1) ...
    default: Processing triggers for mime-support (3.59ubuntu1) ...
    default: Setting up libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up python2.7-minimal (2.7.12-1ubuntu0~16.04.4) ...
    default: Linking and byte-compiling packages for runtime python2.7...
    default: Setting up python-minimal (2.7.12-1~16.04) ...
    default: Selecting previously unselected package python.
    default: (Reading database ... 
(Reading database ... 65%abase ... 5%
    default: (Reading database ... 70%
    default: (Reading database ... 75%
    default: (Reading database ... 80%
    default: (Reading database ... 85%
    default: (Reading database ... 90%
    default: (Reading database ... 95%
(Reading database ... 54946 files and directories currently installed.)
    default: Preparing to unpack .../python_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking python (2.7.12-1~16.04) ...
    default: Selecting previously unselected package libmpc3:amd64.
    default: Preparing to unpack .../libmpc3_1.0.3-1_amd64.deb ...
    default: Unpacking libmpc3:amd64 (1.0.3-1) ...
    default: Selecting previously unselected package pigz.
    default: Preparing to unpack .../pigz_2.3.1-2_amd64.deb ...
    default: Unpacking pigz (2.3.1-2) ...
    default: Selecting previously unselected package m4.
    default: Preparing to unpack .../archives/m4_1.4.17-5_amd64.deb ...
    default: Unpacking m4 (1.4.17-5) ...
    default: Selecting previously unselected package autoconf.
    default: Preparing to unpack .../autoconf_2.69-9_all.deb ...
    default: Unpacking autoconf (2.69-9) ...
    default: Selecting previously unselected package autotools-dev.
    default: Preparing to unpack .../autotools-dev_20150820.1_all.deb ...
    default: Unpacking autotools-dev (20150820.1) ...
    default: Selecting previously unselected package automake.
    default: Preparing to unpack .../automake_1%3a1.15-4ubuntu1_all.deb ...
    default: Unpacking automake (1:1.15-4ubuntu1) ...
    default: Selecting previously unselected package binutils.
    default: Preparing to unpack .../binutils_2.26.1-1ubuntu1~16.04.8_amd64.deb ...
    default: Unpacking binutils (2.26.1-1ubuntu1~16.04.8) ...
    default: Selecting previously unselected package bridge-utils.
    default: Preparing to unpack .../bridge-utils_1.5-9ubuntu1_amd64.deb ...
    default: Unpacking bridge-utils (1.5-9ubuntu1) ...
    default: Selecting previously unselected package libc-dev-bin.
    default: Preparing to unpack .../libc-dev-bin_2.23-0ubuntu11_amd64.deb ...
    default: Unpacking libc-dev-bin (2.23-0ubuntu11) ...
    default: Selecting previously unselected package linux-libc-dev:amd64.
    default: Preparing to unpack .../linux-libc-dev_4.4.0-143.169_amd64.deb ...
    default: Unpacking linux-libc-dev:amd64 (4.4.0-143.169) ...
    default: Selecting previously unselected package libc6-dev:amd64.
    default: Preparing to unpack .../libc6-dev_2.23-0ubuntu11_amd64.deb ...
    default: Unpacking libc6-dev:amd64 (2.23-0ubuntu11) ...
    default: Selecting previously unselected package libisl15:amd64.
    default: Preparing to unpack .../libisl15_0.16.1-1_amd64.deb ...
    default: Unpacking libisl15:amd64 (0.16.1-1) ...
    default: Selecting previously unselected package cpp-5.
    default: Preparing to unpack .../cpp-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking cpp-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package cpp.
    default: Preparing to unpack .../cpp_4%3a5.3.1-1ubuntu1_amd64.deb ...
    default: Unpacking cpp (4:5.3.1-1ubuntu1) ...
    default: Selecting previously unselected package libcc1-0:amd64.
    default: Preparing to unpack .../libcc1-0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libgomp1:amd64.
    default: Preparing to unpack .../libgomp1_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libgomp1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libitm1:amd64.
    default: Preparing to unpack .../libitm1_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libitm1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libatomic1:amd64.
    default: Preparing to unpack .../libatomic1_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libatomic1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libasan2:amd64.
    default: Preparing to unpack .../libasan2_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libasan2:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package liblsan0:amd64.
    default: Preparing to unpack .../liblsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking liblsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libtsan0:amd64.
    default: Preparing to unpack .../libtsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libtsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libubsan0:amd64.
    default: Preparing to unpack .../libubsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libubsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libcilkrts5:amd64.
    default: Preparing to unpack .../libcilkrts5_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libmpx0:amd64.
    default: Preparing to unpack .../libmpx0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libmpx0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libquadmath0:amd64.
    default: Preparing to unpack .../libquadmath0_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libquadmath0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package libgcc-5-dev:amd64.
    default: Preparing to unpack .../libgcc-5-dev_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package gcc-5.
    default: Preparing to unpack .../gcc-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking gcc-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package gcc.
    default: Preparing to unpack .../gcc_4%3a5.3.1-1ubuntu1_amd64.deb ...
    default: Unpacking gcc (4:5.3.1-1ubuntu1) ...
    default: Selecting previously unselected package libstdc++-5-dev:amd64.
    default: Preparing to unpack .../libstdc++-5-dev_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking libstdc++-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package g++-5.
    default: Preparing to unpack .../g++-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ...
    default: Unpacking g++-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Selecting previously unselected package g++.
    default: Preparing to unpack .../g++_4%3a5.3.1-1ubuntu1_amd64.deb ...
    default: Unpacking g++ (4:5.3.1-1ubuntu1) ...
    default: Selecting previously unselected package make.
    default: Preparing to unpack .../archives/make_4.1-6_amd64.deb ...
    default: Unpacking make (4.1-6) ...
    default: Selecting previously unselected package libdpkg-perl.
    default: Preparing to unpack .../libdpkg-perl_1.18.4ubuntu1.5_all.deb ...
    default: Unpacking libdpkg-perl (1.18.4ubuntu1.5) ...
    default: Selecting previously unselected package dpkg-dev.
    default: Preparing to unpack .../dpkg-dev_1.18.4ubuntu1.5_all.deb ...
    default: Unpacking dpkg-dev (1.18.4ubuntu1.5) ...
    default: Selecting previously unselected package build-essential.
    default: Preparing to unpack .../build-essential_12.1ubuntu2_amd64.deb ...
    default: Unpacking build-essential (12.1ubuntu2) ...
    default: Selecting previously unselected package cgroupfs-mount.
    default: Preparing to unpack .../cgroupfs-mount_1.2_all.deb ...
    default: Unpacking cgroupfs-mount (1.2) ...
    default: Selecting previously unselected package libltdl7:amd64.
    default: Preparing to unpack .../libltdl7_2.4.6-0.1_amd64.deb ...
    default: Unpacking libltdl7:amd64 (2.4.6-0.1) ...
    default: Selecting previously unselected package docker.io.
    default: Preparing to unpack .../docker.io_18.09.2-0ubuntu1~16.04.1_amd64.deb ...
    default: Unpacking docker.io (18.09.2-0ubuntu1~16.04.1) ...
    default: Selecting previously unselected package libfakeroot:amd64.
    default: Preparing to unpack .../libfakeroot_1.20.2-1ubuntu1_amd64.deb ...
    default: Unpacking libfakeroot:amd64 (1.20.2-1ubuntu1) ...
    default: Selecting previously unselected package fakeroot.
    default: Preparing to unpack .../fakeroot_1.20.2-1ubuntu1_amd64.deb ...
    default: Unpacking fakeroot (1.20.2-1ubuntu1) ...
    default: Selecting previously unselected package libalgorithm-diff-perl.
    default: Preparing to unpack .../libalgorithm-diff-perl_1.19.03-1_all.deb ...
    default: Unpacking libalgorithm-diff-perl (1.19.03-1) ...
    default: Selecting previously unselected package libalgorithm-diff-xs-perl.
    default: Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-4build1_amd64.deb ...
    default: Unpacking libalgorithm-diff-xs-perl (0.04-4build1) ...
    default: Selecting previously unselected package libalgorithm-merge-perl.
    default: Preparing to unpack .../libalgorithm-merge-perl_0.08-3_all.deb ...
    default: Unpacking libalgorithm-merge-perl (0.08-3) ...
    default: Selecting previously unselected package libexpat1-dev:amd64.
    default: Preparing to unpack .../libexpat1-dev_2.1.0-7ubuntu0.16.04.3_amd64.deb ...
    default: Unpacking libexpat1-dev:amd64 (2.1.0-7ubuntu0.16.04.3) ...
    default: Selecting previously unselected package libfile-fcntllock-perl.
    default: Preparing to unpack .../libfile-fcntllock-perl_0.22-3_amd64.deb ...
    default: Unpacking libfile-fcntllock-perl (0.22-3) ...
    default: Selecting previously unselected package libltdl-dev:amd64.
    default: Preparing to unpack .../libltdl-dev_2.4.6-0.1_amd64.deb ...
    default: Unpacking libltdl-dev:amd64 (2.4.6-0.1) ...
    default: Selecting previously unselected package libpython2.7:amd64.
    default: Preparing to unpack .../libpython2.7_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking libpython2.7:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package libpython2.7-dev:amd64.
    default: Preparing to unpack .../libpython2.7-dev_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking libpython2.7-dev:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package libpython-dev:amd64.
    default: Preparing to unpack .../libpython-dev_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking libpython-dev:amd64 (2.7.12-1~16.04) ...
    default: Selecting previously unselected package libpython-all-dev:amd64.
    default: Preparing to unpack .../libpython-all-dev_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking libpython-all-dev:amd64 (2.7.12-1~16.04) ...
    default: Selecting previously unselected package libtool.
    default: Preparing to unpack .../libtool_2.4.6-0.1_all.deb ...
    default: Unpacking libtool (2.4.6-0.1) ...
    default: Selecting previously unselected package manpages-dev.
    default: Preparing to unpack .../manpages-dev_4.04-2_all.deb ...
    default: Unpacking manpages-dev (4.04-2) ...
    default: Selecting previously unselected package python-all.
    default: Preparing to unpack .../python-all_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking python-all (2.7.12-1~16.04) ...
    default: Selecting previously unselected package python2.7-dev.
    default: Preparing to unpack .../python2.7-dev_2.7.12-1ubuntu0~16.04.4_amd64.deb ...
    default: Unpacking python2.7-dev (2.7.12-1ubuntu0~16.04.4) ...
    default: Selecting previously unselected package python-dev.
    default: Preparing to unpack .../python-dev_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking python-dev (2.7.12-1~16.04) ...
    default: Selecting previously unselected package python-all-dev.
    default: Preparing to unpack .../python-all-dev_2.7.12-1~16.04_amd64.deb ...
    default: Unpacking python-all-dev (2.7.12-1~16.04) ...
    default: Selecting previously unselected package python-pip-whl.
    default: Preparing to unpack .../python-pip-whl_8.1.1-2ubuntu0.4_all.deb ...
    default: Unpacking python-pip-whl (8.1.1-2ubuntu0.4) ...
    default: Selecting previously unselected package python-pip.
    default: Preparing to unpack .../python-pip_8.1.1-2ubuntu0.4_all.deb ...
    default: Unpacking python-pip (8.1.1-2ubuntu0.4) ...
    default: Selecting previously unselected package python-pkg-resources.
    default: Preparing to unpack .../python-pkg-resources_20.7.0-1_all.deb ...
    default: Unpacking python-pkg-resources (20.7.0-1) ...
    default: Selecting previously unselected package python-setuptools.
    default: Preparing to unpack .../python-setuptools_20.7.0-1_all.deb ...
    default: Unpacking python-setuptools (20.7.0-1) ...
    default: Selecting previously unselected package python-wheel.
    default: Preparing to unpack .../python-wheel_0.29.0-1_all.deb ...
    default: Unpacking python-wheel (0.29.0-1) ...
    default: Selecting previously unselected package ubuntu-fan.
    default: Preparing to unpack .../ubuntu-fan_0.12.8~16.04.2_all.deb ...
    default: Unpacking ubuntu-fan (0.12.8~16.04.2) ...
    default: Processing triggers for man-db (2.7.5-1) ...
    default: Processing triggers for install-info (6.1.0.dfsg.1-5) ...
    default: Processing triggers for libc-bin (2.23-0ubuntu11) ...
    default: Processing triggers for ureadahead (0.100.0-19) ...
    default: Processing triggers for systemd (229-4ubuntu21.17) ...
    default: Setting up libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up python2.7 (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up libpython-stdlib:amd64 (2.7.12-1~16.04) ...
    default: Setting up python (2.7.12-1~16.04) ...
    default: Setting up libmpc3:amd64 (1.0.3-1) ...
    default: Setting up pigz (2.3.1-2) ...
    default: Setting up m4 (1.4.17-5) ...
    default: Setting up autoconf (2.69-9) ...
    default: Setting up autotools-dev (20150820.1) ...
    default: Setting up automake (1:1.15-4ubuntu1) ...
    default: update-alternatives: 
    default: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
    default: Setting up binutils (2.26.1-1ubuntu1~16.04.8) ...
    default: Setting up bridge-utils (1.5-9ubuntu1) ...
    default: Setting up libc-dev-bin (2.23-0ubuntu11) ...
    default: Setting up linux-libc-dev:amd64 (4.4.0-143.169) ...
    default: Setting up libc6-dev:amd64 (2.23-0ubuntu11) ...
    default: Setting up libisl15:amd64 (0.16.1-1) ...
    default: Setting up cpp-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up cpp (4:5.3.1-1ubuntu1) ...
    default: Setting up libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libgomp1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libitm1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libatomic1:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libasan2:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up liblsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libtsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libubsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libmpx0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libquadmath0:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up gcc-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up gcc (4:5.3.1-1ubuntu1) ...
    default: Setting up libstdc++-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up g++-5 (5.4.0-6ubuntu1~16.04.11) ...
    default: Setting up g++ (4:5.3.1-1ubuntu1) ...
    default: update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
    default: Setting up make (4.1-6) ...
    default: Setting up libdpkg-perl (1.18.4ubuntu1.5) ...
    default: Setting up dpkg-dev (1.18.4ubuntu1.5) ...
    default: Setting up build-essential (12.1ubuntu2) ...
    default: Setting up cgroupfs-mount (1.2) ...
    default: Setting up libltdl7:amd64 (2.4.6-0.1) ...
    default: Setting up docker.io (18.09.2-0ubuntu1~16.04.1) ...
    default: Adding group `docker' (GID 117) ...
    default: Done.
    default: Setting up libfakeroot:amd64 (1.20.2-1ubuntu1) ...
    default: Setting up fakeroot (1.20.2-1ubuntu1) ...
    default: update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
    default: Setting up libalgorithm-diff-perl (1.19.03-1) ...
    default: Setting up libalgorithm-diff-xs-perl (0.04-4build1) ...
    default: Setting up libalgorithm-merge-perl (0.08-3) ...
    default: Setting up libexpat1-dev:amd64 (2.1.0-7ubuntu0.16.04.3) ...
    default: Setting up libfile-fcntllock-perl (0.22-3) ...
    default: Setting up libltdl-dev:amd64 (2.4.6-0.1) ...
    default: Setting up libpython2.7:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up libpython2.7-dev:amd64 (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up libpython-dev:amd64 (2.7.12-1~16.04) ...
    default: Setting up libpython-all-dev:amd64 (2.7.12-1~16.04) ...
    default: Setting up libtool (2.4.6-0.1) ...
    default: Setting up manpages-dev (4.04-2) ...
    default: Setting up python-all (2.7.12-1~16.04) ...
    default: Setting up python2.7-dev (2.7.12-1ubuntu0~16.04.4) ...
    default: Setting up python-dev (2.7.12-1~16.04) ...
    default: Setting up python-all-dev (2.7.12-1~16.04) ...
    default: Setting up python-pip-whl (8.1.1-2ubuntu0.4) ...
    default: Setting up python-pip (8.1.1-2ubuntu0.4) ...
    default: Setting up python-pkg-resources (20.7.0-1) ...
    default: Setting up python-setuptools (20.7.0-1) ...
    default: Setting up python-wheel (0.29.0-1) ...
    default: Setting up ubuntu-fan (0.12.8~16.04.2) ...
    default: Processing triggers for libc-bin (2.23-0ubuntu11) ...
    default: Processing triggers for systemd (229-4ubuntu21.17) ...
    default: Processing triggers for ureadahead (0.100.0-19) ...
    default: Collecting pip
    default:   Downloading https://files.pythonhosted.org/packages/d8/f3/413bab4ff08e1fc4828dfc59996d721917df8e8583ea85385d51125dceff/pip-19.0.3-py2.py3-none-any.whl (1.4MB)
    default: Collecting six
    default:   Downloading https://files.pythonhosted.org/packages/73/fb/00a976f728d0d1fecfe898238ce23f502a721c0ac0ecfedb80e0d88c64e9/six-1.12.0-py2.py3-none-any.whl
    default: Installing collected packages: pip, six
    default:   Found existing installation: pip 8.1.1
    default:     Not uninstalling pip at /usr/lib/python2.7/dist-packages, outside environment /usr
    default: Successfully installed pip-19.0.3 six-1.12.0
    default: 
    default: gzip: stdin: unexpected end of file
    default: tar: Child returned status 1
    default: tar: Error is not recoverable: exiting now
    default: 
    default: gzip: stdin: not in gzip format
    default: tar: Child returned status 1
    default: tar: Error is not recoverable: exiting now
    default: Initialized empty Git repository in /home/vagrant/DPDK_in_Containers_Hands-on_Lab/.git/
    default: From https://github.com/intel/SDN-NFV-Hands-on-Samples
    default:  * branch            master     -> FETCH_HEAD
    default:  * [new branch]      master     -> origin/master
    default: mv: cannot stat 'pktgen-dpdk-pktgen-3.1.1': No such file or directory
    default: mv: 
    default: cannot stat '/home/ubuntu/training/dpdk-container-lab/docker-build/pktgen/pktgen-dpdk-pktgen-3.1.1': No such file or directory
    default: cp: cannot stat '/home/ubuntu/dpdk-stable-16.11.1'
    default: : No such file or directory
    default: mv: cannot stat '/home/ubuntu/training/dpdk-container-lab/docker-build/testpmd/dpdk-stable-16.11.1': No such file or directory
    default: /tmp/vagrant-shell: line 23: cd: /home/ubuntu/training/dpdk-container-lab/docker-build/testpmd/dpdk: No such file or directory
    default: mv: cannot stat '../2M-hugepage.patch': No such file or directory
    default: patch: **** Can't open patch file 2M-hugepage.patch : No such file or directory
22:55:10-mac@Iluvatar:DPDK_in_Containers_Hands-on_Lab

I have found workaround to get this working. I used wget instead of curl, and substitute the '/home/ubuntu' with '/home/vagrant'.

[p3s]

I have created pull request #2 to fix this in upstream