Skip to content

Latest commit

 

History

History
92 lines (69 loc) · 2.79 KB

README.md

File metadata and controls

92 lines (69 loc) · 2.79 KB

locust integreatly operator

This repo contains code to do load testing on the integreatly-operator.

Recommendation

This repo currently will work with python 3.9 or better but the recommended version is python 3.11 or higher.

Configuration Files

There are three configuration formats that are accepted. Examples of these files can be found in the configuration_samples folder.

The toml configuration format is the recommended format but requires python 3.11 or higher to be parsed. New configuration options will be added to the toml format only.

Json format has being included as alternative to the csv format.

The csv format is a historical artifact from using the hyperfoil test suite. This file can have two names rhsso_auth.csv or auth.csv. Support for csv will be removed once python 3.11 is the minium support version.

Format Filename(s)
toml config.toml
json auth.json
csv rhsso_auth.csv, auth.csv

Which ever file format is used the configuration file needs to be placed in the same location as the locustfile.py.

Run load test with remote host

Log into a remote instances and insure the following tooling is installed

sudo dnf install python3.11 -y
pip3.11 install locust
mkdir locust

From the local machine copy the source files.

scp -i ~/.ssh/some_key.pem -r locust/* ec2-user@<remote.url>:locust

After an initial hyperfoil run copy the rhsso_auth.csv file from /tmp/hyperfoil/runs/****/.

Start locust and the max number of workers supported by the ec2 instances.

~/locust/start.sh

Navigate to the locust UI via http://<remote.url>:8089. Here you can start the load testing.

After the test have run and test results downloaded, locust can be stopped using ~/locust/kill.sh

Develop load test locally

Set local environment to use python 3.11. Requires 3.11 to be installed but 3.11 does not need to be the system default version.

poetry env use 3.11

Set up the local environment using poetry.

poetry install

If you are wishing not to use the mock server you can set up the environment using.

poetry install --no-dev

As the config.toml file is required there is a sample file that will work with the mock server.

cp configuration_samples/sample_config.toml locust/config.toml

Active the mock server if needed.

poetry run uvicorn --reload mock_server.main:app

Start an instance of locust.

cd locust
poetry run locust

Usefully Resources