OpenDTU-OnBattery Stromzähler mit Tasmota einbinden

[Odiug68]

Hallo, and welcome everone...
I have severe trouble to get my power meter info via HTTP(S) *+ JSON into my OpenDTU.

I use a TASMOTA with a IR head to pin 3 and this is working fine and as is should be.
I use the following script and the indications on the TASMOTA web interface are correct.

D
B

=>sensor53 r

M 1
+1,3,s,0,9600,
1,77070100010800ff@1000,Total consumption,kWh,total_in,2
1,77070100020800ff@1000,Total feed-in,kWh,total_out,2
1,77070100100700ff@1,Power,W,power_curr,0

Also, the answer on the URL GET request seems to be correct.

GET >>>> http://192.168.178.47/cm?cmnd=status%208
Reveive on browser >>>> {"StatusSNS":{"Time":"2024-11-20T13:49:13","":{"total_in":3100.47,"total_out":914.81,"power_curr":2405}}}

My problem is that I do not manage to create the correct JSON path...
I tried for hours now but do nto find any working solution ...

What is incorrect here ?
StatusSNS//power_curr

I hope someone can help...

[andreas70]

Try StatusSNS//power_curr

[Odiug68]

Thanks Andreas,
I have tried this .... but.... answer is ..

[HttpPowerMeter] Unable to access JSON key 'power_curr' (JSON path 'StatusSNS//power_curr', position 11)

[Odiug68]

[spcqike]

You need to give your meter a name. Whatever, doesn’t matter. But your json must look like

StatusSNS/yourName/power_curr

try

+1,3,s,0,9600,yourName

[Odiug68]

THANKS !!!!!!
This was the problem! I had tried to name the TASMOTA in the TASMOTA web editor but this never had an effect.
With your hint I now edit the script and YES !!!
Thanks again,