Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

mdns-repeater (zeroconf/bonjour) does not listen on IPv6 #21

Open
tuxjz opened this issue Apr 11, 2021 · 1 comment
Open

mdns-repeater (zeroconf/bonjour) does not listen on IPv6 #21

tuxjz opened this issue Apr 11, 2021 · 1 comment

Comments

@tuxjz
Copy link

tuxjz commented Apr 11, 2021

Describe the issue you are experiencing

mdns-repeater in hassio_multicast container does not listen to IPv6 mdns port 5353.

Previously opened issue in wrong repo: home-assistant/core#48751

What is the used version of the Supervisor?

supervisor-2021.03.9

What type of installation are you running?

Home Assistant Supervised

Which operating system are you running on?

Debian

What is the version of your installed operating system?

10.9

What version of Home Assistant Core is installed?

core-2021.4.3

Steps to reproduce the issue

  1. Configure host interface(s) with IPv6 addresses
  2. Make sure zeroconf has IPv6 enabled (default config)
  3. check if there is any *:5353 or [::]:5353 port binding # ss -pnul on standalone instalation, there is, on hass there isn't

Anything in the Supervisor logs that might be useful for us?

# Put your logs below this line
ss -tapnul |grep mdns
udp UNCONN 0 0 172.30.32.1%hassio:5353 0.0.0.0:* users:(("mdns-repeater",pid=2351,fd=5))
udp UNCONN 0 0 10.59.180.4%ens192:5353 0.0.0.0:* users:(("mdns-repeater",pid=2351,fd=4))
udp UNCONN 0 0 0.0.0.0:5353 0.0.0.0:* users:(("mdns-repeater",pid=2351,fd=3))
@pvizeli pvizeli transferred this issue from home-assistant/supervisor Apr 12, 2021
@tlm
Copy link

tlm commented Jul 4, 2022

+1 this.

What is the appetite for taking a PR to change the container over to using avahi or similar?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants