macos-guest-virtualbox.sh

#!/bin/bash -i
# Push-button installer of macOS on VirtualBox
# (c) myspaghetti, licensed under GPL2.0 or higher
# url: https://github.com/myspaghetti/macos-virtualbox
# version 0.99.1.6

#       Dependencies: bash  coreutils  gzip  unzip  wget  xxd  dmg2img
#  Optional features: tesseract-ocr  tesseract-ocr-eng
# Supported versions:
#               VirtualBox >= 6.1.6     dmg2img >= 1.6.5
#               GNU bash >= 4.3         GNU coreutils >= 8.22
#               GNU gzip >= 1.5         GNU wget >= 1.14
#               Info-ZIP unzip >= 6.0   xxd with -e little endian support
#               tesseract-ocr >= 4

function set_variables() {
# Customize the installation by setting these variables:
vm_name="macOS"                  # name of the VirtualBox virtual machine
macOS_release_name="Catalina"    # install "HighSierra" "Mojave" or "Catalina"
storage_size=80000               # VM disk image size in MB, minimum 22000
storage_format="vdi"             # VM disk image file format, "vdi" or "vmdk"
cpu_count=2                      # VM CPU cores, minimum 2
memory_size=4096                 # VM RAM in MB, minimum 2048
gpu_vram=128                     # VM video RAM in MB, minimum 34, maximum 128
resolution="1280x800"            # VM display resolution

# Values for NVRAM and EFI parameters are required by iCloud, iMessage,
# and other connected Apple applications, but otherwise not required.
# Parameters taken from a genuine Mac may result in a "Call customer support"
# message if they do not match the genuine Mac exactly.
# Non-genuine yet genuine-like parameters usually work.

# Assigning the following parameters is not required when installing or using macOS.

DmiSystemFamily="MacBook Pro"          # Model Name
DmiSystemProduct="MacBookPro11,2"      # Model Identifier
DmiBIOSVersion="string:MBP7.89"        # Boot ROM Version
DmiSystemSerial="NO_DEVICE_SN"         # Serial Number (system)
DmiSystemUuid="CAFECAFE-CAFE-CAFE-CAFE-DECAFFDECAFF" # Hardware UUID
ROM='%aa*%bbg%cc%dd'                   # ROM identifier
MLB="NO_LOGIC_BOARD_SN"                # MLB SN stored in NVRAM
DmiBoardSerial="${MLB}"                # MLB SN stored in EFI
DmiBoardProduct="Mac-3CBD00234E554E41" # Product (board) identifier
SystemUUID="aabbccddeeff00112233445566778899" # System UUID

# If the script is running on macOS and "get_parameters_from_macOS_host" is
# set to "yes", the script will attempt to get the host's EFI and NVRAM
# parameters and override the above EFI and NVRAM parameters.

get_parameters_from_macOS_host="no"

if [[ "$(sw_vers 2>/dev/null)" && "${get_parameters_from_macOS_host}" =~ [Yy] ]]; then
    # These values are taken from a genuine Mac...
    hardware_overview="$(system_profiler SPHardwareDataType)"
    model_name="${hardware_overview##*Model Name: }"; model_name="${model_name%%$'\n'*}"
    model_identifier="${hardware_overview##*Model Identifier: }"; model_identifier="${model_identifier%%$'\n'*}"
    boot_rom_ver="${hardware_overview##*Boot ROM Version: }"; boot_rom_ver="${boot_rom_ver%%$'\n'*}"
    sn_system="${hardware_overview##*Serial Number (system): }"; sn_system="${sn_system%%$'\n'*}"
    hardware_uuid="${hardware_overview##*Hardware UUID: }"; hardware_uuid="${hardware_uuid%%$'\n'*}"
    nvram_rom="$(nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM)"; nvram_rom="${nvram_rom##*$'\t'}"
    nvram_mlb="$(nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB)"; nvram_mlb="${nvram_mlb##*$'\t'}"
    ioreg_board_id="$(ioreg -p "IODeviceTree" -r -n / -d 1)"; ioreg_board_id="${ioreg_board_id##*board-id\" = <\"}"; ioreg_board_id="${ioreg_board_id%%\">*}"
    ioreg_system_id="$(ioreg -p "IODeviceTree" -n platform -r)"; ioreg_system_id="${ioreg_system_id##*system-id\" = <}"; ioreg_system_id="${ioreg_system_id%%>*}"

    # ...and set in VirtualBox EFI and NVRAM...
    DmiSystemFamily="${model_name}"         # Model Name
    DmiSystemProduct="${model_identifier}"  # Model Identifier
    DmiBIOSVersion="string:${boot_rom_ver}" # Boot ROM Version
    DmiSystemSerial="${sn_system}"          # Serial Number (system)
    DmiSystemUuid="${hardware_uuid}"        # Hardware UUID
    ROM="${nvram_rom}"                      # ROM identifier, stored in NVRAM
    MLB="${nvram_mlb}"                      # MLB SN, stored in NVRAM
    DmiBoardSerial="${nvram_mlb}"           # MLB SN, stored in EFI
    DmiBoardProduct="${ioreg_board_id}"     # Product (board) identifier
    SystemUUID="${ioreg_system_id}"         # System UUID, stored in NVRAM
fi

system_integrity_protection='10'  # '10' - enabled, '77' - disabled

# Additional configurations may be saved in external files and loaded with the
# following command prior to executing the script:
#   export macos_vm_vars_file=/path/to/variable_assignment_file
# "variable_assignment_file" is a plain text file that contains zero or more
# lines with a variable assignment for any variable specified above.
[[ -r "${macos_vm_vars_file}" ]] && source "${macos_vm_vars_file}"
}

# welcome message
function welcome() {
echo -ne "\n${highlight_color}Push-button installer of macOS on VirtualBox${default_color}

This script installs only open-source software and unmodified Apple binaries,
and requires about ${highlight_color}50GB${default_color} of available storage, of which 25GB are for temporary
installation files that may be deleted when the script is finished.

The script interacts with the virtual machine twice, ${highlight_color}please do not interact${default_color}
${highlight_color}with the virtual machine manually${default_color} before the script is finished.

Documentation about optional configuration, ${highlight_color}iCloud and iMessage connectivity${default_color},
resuming the script by stages, and other topics can be viewed with the
following command:

"
would_you_like_to_know_less
echo -ne "\n${highlight_color}Press enter to review the script configuration${default_color}"
clear_input_buffer_then_read

function pad_to_33_chars() {
    local padded="${1}                                 "
    echo "${padded:0:33}${2}"
}

# custom settings prompt
echo -e "\nvm_name=\"${vm_name}\""
pad_to_33_chars "macOS_release_name=\"${macOS_release_name}\"" "# install \"HighSierra\" \"Mojave\" \"Catalina\""
pad_to_33_chars "storage_size=${storage_size}"                 "# VM disk image size in MB, minimum 22000"
pad_to_33_chars "storage_format=\"${storage_format}\""         "# VM disk image file format, \"vdi\" or \"vmdk\""
pad_to_33_chars "cpu_count=${cpu_count}"                       "# VM CPU cores, minimum 2"
pad_to_33_chars "memory_size=${memory_size}"                   "# VM RAM in MB, minimum 2048"
pad_to_33_chars "gpu_vram=${gpu_vram}"                         "# VM video RAM in MB, minimum 34, maximum 128"
pad_to_33_chars "resolution=\"${resolution}\""                 "# VM display resolution"
echo -ne "\nThese values may be customized as described in the documentation.\n
${highlight_color}Press enter to continue, CTRL-C to exit${default_color}"
clear_input_buffer_then_read
}

# check dependencies

function check_shell() {
if [[ -n "${BASH_VERSION}" && -n "${ZSH_VERSION}" ]]; then
    echo "The script cannot determine if it is executed on bash or zsh."
    echo "Please explicitly execute the script on the same shell as the interactive shell,"
    echo -e "for example, for zsh:\n"
    echo "    ${highlight_color}zsh -i macos-guest-virtualbox.sh${default_color}"
    exit
elif [[ -n "${BASH_VERSION}" ]]; then
    if [[ ! ( "${BASH_VERSION:0:1}" -ge 5
              || "${BASH_VERSION:0:3}" =~ 4\.[3-9]
              || "${BASH_VERSION:0:4}" =~ 4\.[12][0-9] ) ]]; then
        echo "Please execute this script with Bash 4.3 or higher, or zsh 5.5 or higher."
        if [[ -n "$(sw_vers 2>/dev/null)" ]]; then
            echo "macOS detected. Make sure the script is not executed with the default /bin/bash"
            echo "which is version 3. Explicitly type the executable path, for example for zsh:"
            echo "    ${highlight_color}/path/to/5.5/zsh macos-guest-virtualbox.sh${default_color}"
        fi
        exit
    fi
elif [[ -n "${ZSH_VERSION}" ]]; then
    if [[ ( "${ZSH_VERSION:0:1}" -ge 6
            || "${ZSH_VERSION:0:3}" =~ 5\.[5-9]
            || "${ZSH_VERSION:0:4}" =~ 5\.[1-4][0-9] ) ]]; then
        # make zsh parse the script (almost) like bash
        setopt extendedglob sh_word_split ksh_arrays posix_argzero nullglob bsd_echo
    else
        echo "Please execute this script with zsh version 5.5 or higher."
        exit
    fi
else
    echo "The script appears to be executed on a shell other than bash or zsh. Exiting."
    exit
fi

if [[ ! $- =~ i ]]; then  # terminal is not interactive
    echo "The shell appears to be executed non-interactively. If this is not the case,"
    echo "please press CTRL-C and run the script under an interactive shell, for example"
    echo -e "${highlight_color}bash -i macos-guest-virtualbox.sh${default_color}    or    ${highlight_color}zsh -i macos-guest-virtualbox.sh${default_color}\n"
    echo "Otherwise, the script will continue running non-interactively."
    animated_please_wait 5
    echo ""
    tesseract_ocr="$(tesseract --version 2>/dev/null)"
    tesseract_lang="$(tesseract --list-langs 2>/dev/null)"
    regex_ver='[Tt]esseract 4'  # for zsh quoted regex compatibility
    if [[ ! ( "${tesseract_ocr}" =~ ${regex_ver} ) || -z "${tesseract_lang}" ]]; then
        echo "Running the script on a non-interactive shell requires the following packages:"
        echo -e "    tesseract-ocr >= 4    tesseract-ocr-eng\n"
        echo "Exiting."
        animated_please_wait 5
        echo ""
        exit
    fi
fi

}

function check_gnu_coreutils_prefix() {
if [[ -n "$(gcsplit --help 2>/dev/null)" ]]; then
    function base64() {
        gbase64 "$@"
    }
    function csplit() {
        gcsplit "$@"
    }
    function expr() {
        gexpr "$@"
    }
    function ls() {
        gls "$@"
    }
    function split() {
        gsplit "$@"
    }
    function tac() {
        gtac "$@"
    }
    function seq() {
        gseq "$@"
    }
    function sort() {
        gsort "$@"
    }
fi
}

function check_dependencies() {

# check environment for macOS and non-GNU coreutils
if [[ -n "$(sw_vers 2>/dev/null)" ]]; then
    # Add Homebrew GNU coreutils to PATH if path exists
    homebrew_gnubin="/usr/local/opt/coreutils/libexec/gnubin"
    if [[ -d "${homebrew_gnubin}" ]]; then
        PATH="${homebrew_gnubin}:${PATH}"
    fi
    # if csplit isn't GNU variant, exit
    if [[ -z "$(csplit --help 2>/dev/null)" ]]; then
        echo -e "\nmacOS detected.\nPlease use a package manager such as ${highlight_color}homebrew${default_color}, ${highlight_color}pkgsrc${default_color}, ${highlight_color}nix${default_color}, or ${highlight_color}MacPorts${default_color}"
        echo "Please make sure the following packages are installed and that"
        echo "their path is in the PATH variable:"
        echo -e "    ${highlight_color}bash  coreutils  dmg2img  gzip  unzip  wget  xxd${default_color}"
        echo "Please make sure Bash and coreutils are the GNU variant."
        exit
    fi
fi

# check for gzip, unzip, coreutils, wget
if [[ -z "$(gzip --help 2>/dev/null)" ||
      -z "$(unzip -hh 2>/dev/null)" ||
      -z "$(csplit --help 2>/dev/null)" ||
      -z "$(wget --version 2>/dev/null)" ]]; then
    echo "Please make sure the following packages are installed"
    echo -e "and that they are of the version specified or newer:\n"
    echo "    coreutils 8.22   wget 1.14   gzip 1.5   unzip 6.0"
    echo -e "\nPlease make sure the coreutils and gzip packages are the GNU variant."
    exit
fi

# check that xxd supports endianness -e flag
if [[ -z "$(xxd -e -p -l 16 /dev/urandom 2>/dev/null)" ]]; then
    echo "Please make sure a version of xxd which supports the -e option is installed."
    echo -e "The -e option should be listed when executing   ${low_contrast_color}xxd --help${default_color}"
    echo "The package vim-common-8 provides a compatible version on most modern distros."
    exit
fi

# wget supports --show-progress from version 1.16
regex='1\.1[6-9]|1\.[2-9][0-9]'  # for zsh quoted regex compatibility
if [[ "$(wget --version 2>/dev/null | head -n 1)" =~ ${regex} ]]; then
    wgetargs="--quiet --continue --show-progress --timeout=60"  # pretty
else
    wgetargs="--continue"  # ugly
fi

# VirtualBox in ${PATH}
# Cygwin
if [[ -n "$(cygcheck -V 2>/dev/null)" ]]; then
    if [[ -n "$(cmd.exe /d/s/c call VBoxManage.exe -v 2>/dev/null)" ]]; then
        function VBoxManage() {
            cmd.exe /d/s/c call VBoxManage.exe "$@"
        }
    else
        cmd_path_VBoxManage='C:\Program Files\Oracle\VirtualBox\VBoxManage.exe'
        echo "Can't find VBoxManage in PATH variable,"
        echo "checking ${cmd_path_VBoxManage}"
        if [[ -n "$(cmd.exe /d/s/c call "${cmd_path_VBoxManage}" -v 2>/dev/null)" ]]; then
            function VBoxManage() {
                cmd.exe /d/s/c call "${cmd_path_VBoxManage}" "$@"
            }
            echo "Found VBoxManage"
        else
            echo "Please make sure VirtualBox version 5.2 or higher is installed, and that"
            echo "the path to the VBoxManage.exe executable is in the PATH variable, or assign"
            echo "in the script the full path including the name of the executable to"
            echo -e "the variable ${highlight_color}cmd_path_VBoxManage${default_color}"
            exit
        fi
    fi
# Windows Subsystem for Linux 2 (WSL2 or WSLg)
elif [[ "$(cat /proc/sys/kernel/osrelease 2>/dev/null)" =~ WSL[2Gg] ]]; then  # WSL2 or WSLg
    if [[ -n "$(VBoxManage -v 2>/dev/null)" ]]; then
        if [[ ! "$(lsmod)" =~ vboxdrv ]]; then  # if the vboxdrv kernel module is not present
            echo "The script appears to be executed on WSL2 or WSLg."
            echo "Mind that WSL2 and WSLg require kernel module compilation and"
            echo "custom configuration that is not supported by the script."
            echo "If the script does not detect the ${highlight_color}vboxdrv${default_color} kernel module, it exits."
            exit
        fi
    else
        echo "Please make sure VirtualBox version 5.2 or higher and its kernel module"
        echo "are installed, and that the path to the VBoxManage executable"
        echo "is in the PATH variable."
        exit
    fi
# Windows Subsystem for Linux (WSL "1") 
elif [[ "$(cat /proc/sys/kernel/osrelease 2>/dev/null)" =~ [Mm]icrosoft ]]; then
    if [[ -n "$(VBoxManage.exe -v 2>/dev/null)" ]]; then
        function VBoxManage() {
            VBoxManage.exe "$@"
        }
    else
        wsl_path_VBoxManage='/mnt/c/Program Files/Oracle/VirtualBox/VBoxManage.exe'
        echo "Can't find VBoxManage in PATH variable,"
        echo "checking ${wsl_path_VBoxManage}"
        if [[ -n "$("${wsl_path_VBoxManage}" -v 2>/dev/null)" ]]; then
            PATH="${PATH}:${wsl_path_VBoxManage%/*}"
            function VBoxManage() {
                VBoxManage.exe "$@"
            }
            echo "Found VBoxManage"
        else
            echo "Please make sure VirtualBox is installed on Windows, and that the path to the"
            echo "VBoxManage.exe executable is in the PATH variable, or assigned in the script"
            echo -e "to the variable \"${highlight_color}wsl_path_VBoxManage${default_color}\" including the name of the executable."
            exit
        fi
    fi
# everything else (not cygwin and not wsl)
elif [[ -z "$(VBoxManage -v 2>/dev/null)" ]]; then
    echo "Please make sure VirtualBox version 5.2 or higher and its kernel module"
    echo "are installed, and that the path to the VBoxManage executable"
    echo "is in the PATH variable."
    exit
fi

# VirtualBox version
vbox_version="$(VBoxManage -v 2>/dev/null)"
vbox_version="${vbox_version//[$'\r\n']/}"
if [[ -z "${vbox_version}" || -z "${vbox_version:2:1}" ]]; then
    echo "Can't determine VirtualBox version. Exiting."
    exit
elif [[ ! ( "${vbox_version:0:1}" -gt 5
         || "${vbox_version:0:3}" =~ 5\.2 ) ]]; then
    echo -e "\nPlease make sure VirtualBox version 5.2 or higher is installed."
    echo "Exiting."
    exit
elif [[ "${vbox_version:0:1}" = 5 ]]; then
    echo -e "\n${highlight_color}VirtualBox version ${vbox_version} detected.${default_color} Please see the following"
    echo -ne "URL for issues with the VISO filesystem on VirtualBox 5.2 to 5.2.40:\n\n"
    echo "  https://github.com/myspaghetti/macos-virtualbox/issues/86"
    echo -ne "\n${highlight_color}Press enter to continue, CTRL-C to exit${default_color}"
    clear_input_buffer_then_read
fi

# Oracle VM VirtualBox Extension Pack
extpacks="$(VBoxManage list extpacks 2>/dev/null)"
if [[ "$(expr match "${extpacks}" '.*Oracle VM VirtualBox Extension Pack')" -le "0" ||
      "$(expr match "${extpacks}" '.*Usable:[[:blank:]]*false')" -gt "0" ]];
then
    echo -e "\nThe command \"VBoxManage list extpacks\" either does not list the Oracle VM"
    echo -e "VirtualBox Extension Pack, or lists one or more extensions as unusable."
    echo -e "The virtual machine will be configured without USB xHCI controllers."
    extension_pack_usb3_support="--usbxhci off"
else
    extension_pack_usb3_support="--usbxhci on"
fi

# dmg2img
if ! dmg2img >/dev/null 2>&1; then
    if [[ -z "$(cygcheck -V 2>/dev/null)" ]]; then
        echo -e "\nPlease install the package dmg2img."
        exit
    fi
    if [[ -z "$("${PWD%%/}/dmg2img.exe" -d 2>/dev/null)" ]]; then
        if [[ -z "${PWD}" ]]; then echo "PWD environment variable is not set. Exiting."; exit; fi
        echo "Locally installing dmg2img"
        wget "http://vu1tur.eu.org/tools/dmg2img-1.6.6-win32.zip" \
             ${wgetargs} \
             --output-document="dmg2img-1.6.6-win32.zip"
        if [[ ! -s dmg2img-1.6.6-win32.zip ]]; then
             echo "Error downloading dmg2img. Please provide the package manually."
             exit
        fi
        unzip -oj "dmg2img-1.6.6-win32.zip" "dmg2img.exe"
        rm "dmg2img-1.6.6-win32.zip"
        chmod +x "dmg2img.exe"
        [[ ! -x "dmg2img.exe" ]] && echo "Error setting the executable permission for dmg2img.exe. Exiting." && exit
    fi
    function dmg2img() {
        "${PWD%%/}/dmg2img.exe" "$@"
    }
fi

# set Apple software update catalog URL according to macOS version
HighSierra_sucatalog='https://swscan.apple.com/content/catalogs/others/index-10.13-10.12-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog'
Mojave_sucatalog='https://swscan.apple.com/content/catalogs/others/index-10.14-10.13-10.12-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog'
Catalina_sucatalog='https://swscan.apple.com/content/catalogs/others/index-10.15-10.14-10.13-10.12-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog'
if [[ "${macOS_release_name:0:1}" =~ [Cc] ]]; then
    if [[ ! ( "${vbox_version:0:1}" -gt 6 ||
              "${vbox_version}" =~ ^6\.1\.[4-9] ||
              "${vbox_version}" =~ ^6\.1\.[123][0-9] ||
              "${vbox_version}" =~ ^6\.[2-9] ) ]]; then
        echo -e "\nmacOS Catalina requires VirtualBox version 6.1.4 or higher."
        echo "Exiting."
        exit
    fi
fi
if [[ "${macOS_release_name:0:1}" =~ [Cc] ]]; then
    macOS_release_name="Catalina"
    CFBundleShortVersionString="10.15"
    sucatalog="${Catalina_sucatalog}"
elif [[ "${macOS_release_name:0:1}" =~ [Hh] ]]; then
    macOS_release_name="HighSierra"
    CFBundleShortVersionString="10.13"
    sucatalog="${HighSierra_sucatalog}"
elif [[ "${macOS_release_name:0:1}" =~ [Mm] ]]; then
    macOS_release_name="Mojave"
    CFBundleShortVersionString="10.14"
    sucatalog="${Mojave_sucatalog}"
else
    echo "Can't parse macOS_release_name. Exiting."
    exit
fi
print_dimly "${macOS_release_name} selected to be downloaded and installed"
}
# Done with dependencies

function prompt_delete_existing_vm() {
print_dimly "stage: prompt_delete_existing_vm"
if [[ -n "$(VBoxManage showvminfo "${vm_name}" 2>/dev/null)" ]]; then
    echo -e "\nA virtual machine named \"${vm_name}\" already exists."
    echo -ne "${warning_color}Delete existing virtual machine \"${vm_name}\"?${default_color}"
    prompt_delete_y_n
    if [[ "${delete}" == "y" ]]; then
        echo "Deleting ${vm_name} virtual machine."
        VBoxManage unregistervm "${vm_name}" --delete
    else
        echo -e "\n${highlight_color}Please assign a different VM name to variable \"vm_name\" by editing the script,${default_color}"
        echo "or skip this check manually as described when executing the following command:"
        would_you_like_to_know_less
        exit
    fi
fi
}

# Attempt to create new virtual machine named "${vm_name}"
function create_vm() {
print_dimly "stage: create_vm"
if [[ -n "$( VBoxManage createvm --name "${vm_name}" --ostype "MacOS1013_64" --register 2>&1 >/dev/null )" ]]; then
    echo -e "\nError: Could not create virtual machine \"${vm_name}\"."
    echo -e "${highlight_color}Please delete exising \"${vm_name}\" VirtualBox configuration files ${warning_color}manually${default_color}.\n"
    echo -e "Error message:\n"
    VBoxManage createvm --name "${vm_name}" --ostype "MacOS1013_64" --register 2>/dev/tty
    exit
fi
}

function check_default_virtual_machine() {
print_dimly "stage: check_default_virtual_machine"
echo -e "\nChecking that VirtualBox starts the virtual machine without errors."
if [[ -n $(VBoxManage startvm "${vm_name}" 2>&1 1>/dev/null) ]]; then
    echo -e "Error while starting the virtual machine.\nExiting."
    exit
fi
VBoxManage controlvm "${vm_name}" poweroff 2>/dev/null
echo -e "\nChecking that VirtualBox uses hardware-supported virtualization."
vbox_log="$(VBoxManage showvminfo "${vm_name}" --log 0)"
regex='Attempting fall back to NEM'  # for zsh quoted regex compatibility
if [[ "${vbox_log}" =~ ${regex} ]]; then
    echo -e "\nVirtualbox is not using hardware-supported virtualization features."
    if [[ -n "$(cygcheck -V 2>/dev/null)" ||
          "$(cat /proc/sys/kernel/osrelease 2>/dev/null)" =~ [Mm]icrosoft ]]; then
        echo "Check that software such as Hyper-V, Windows Sandbox, WSL2, memory integrity"
        echo "protection, and other Windows features that lock virtualization are turned off."
    fi
    echo "Exiting."
    exit
fi
}

function prepare_macos_installation_files() {
print_dimly "stage: prepare_macos_installation_files"
# Find the correct download URL in the Apple catalog
echo -e "\nDownloading Apple macOS ${macOS_release_name} software update catalog"
wget "${sucatalog}" \
     ${wgetargs} \
     --output-document="${macOS_release_name}_sucatalog"

# if file was not downloaded correctly
if [[ ! -s "${macOS_release_name}_sucatalog" ]]; then
    wget --debug --timeout=60 -O /dev/null -o "${macOS_release_name}_wget.log" "${sucatalog}"
    echo -e "\nCouldn't download the Apple software update catalog."
    if [[ "$(expr match "$(cat "${macOS_release_name}_wget.log")" '.*ERROR[[:print:]]*is not trusted')" -gt "0" ]]; then
        echo -e "\nMake sure certificates from a certificate authority are installed."
        echo "Certificates are often installed through the package manager with"
        echo "a package named  ${highlight_color}ca-certificates${default_color}"
    fi
    echo "Exiting."
    exit
fi

echo "Trying to find macOS ${macOS_release_name} InstallAssistant download URL"
tac "${macOS_release_name}_sucatalog" | csplit - '/InstallAssistantAuto.smd/+1' '{*}' -f "${macOS_release_name}_sucatalog_" -s
for catalog in "${macOS_release_name}_sucatalog_"* "error"; do
    if [[ "${catalog}" == error ]]; then
        rm "${macOS_release_name}_sucatalog"*
        echo "Couldn't find the requested download URL in the Apple catalog. Exiting."
       exit
    fi
    urlbase="$(tail -n 1 "${catalog}" 2>/dev/null)"
    urlbase="$(expr match "${urlbase}" '.*\(http://[^<]*/\)')"
    wget "${urlbase}InstallAssistantAuto.smd" \
    ${wgetargs} \
    --output-document="${catalog}_InstallAssistantAuto.smd"
    if [[ "$(cat "${catalog}_InstallAssistantAuto.smd" )" =~ Beta ]]; then
        continue
    fi
    found_version="$(head -n 6 "${catalog}_InstallAssistantAuto.smd" | tail -n 1)"
    if [[ "${found_version}" == *${CFBundleShortVersionString}* ]]; then
        echo -e "Found download URL: ${urlbase}\n"
        rm "${macOS_release_name}_sucatalog"*
        break
    fi
done
echo "Downloading macOS installation files from swcdn.apple.com"
for filename in "BaseSystem.chunklist" \
                "InstallInfo.plist" \
                "AppleDiagnostics.dmg" \
                "AppleDiagnostics.chunklist" \
                "BaseSystem.dmg" \
                "InstallESDDmg.pkg"; \
    do wget "${urlbase}${filename}" \
            ${wgetargs} \
            --output-document "${macOS_release_name}_${filename}"
done

echo -e "\nSplitting the several-GB InstallESDDmg.pkg into 1GB parts because"
echo "VirtualBox hasn't implemented UDF/HFS VISO support yet and macOS"
echo "doesn't support ISO 9660 Level 3 with files larger than 2GB."
split --verbose -a 2 -d -b 1000000000 "${macOS_release_name}_InstallESDDmg.pkg" "${macOS_release_name}_InstallESD.part"

if [[ ! -s "ApfsDriverLoader.efi" ]]; then
    echo -e "\nDownloading open-source APFS EFI drivers used for VirtualBox 6.0 and 5.2"
    [[ "${vbox_version:0:1}" -gt 6 || ( "${vbox_version:0:1}" = 6 && "${vbox_version:2:1}" -ge 1 ) ]] && echo "...even though VirtualBox version 6.1 or higher is detected."
    wget 'https://github.com/acidanthera/AppleSupportPkg/releases/download/2.0.4/AppleSupport-v2.0.4-RELEASE.zip' \
        ${wgetargs} \
        --output-document 'AppleSupport-v2.0.4-RELEASE.zip'
        unzip -oj 'AppleSupport-v2.0.4-RELEASE.zip'
fi
}

function create_nvram_files() {
print_dimly "stage: create_nvram_files"

# Each NVRAM file may contain multiple entries.
# Each entry contains a namesize, datasize, name, guid, attributes, and data.
# Each entry is immediately followed by a crc32 of the entry.
# The script creates each file with only one entry for easier editing.
#
# The hex strings are stripped by xxd, so they can
# look like "0xAB 0xCD" or "hAB hCD" or "AB CD" or "ABCD" or a mix of formats
# and have extraneous characters like spaces or minus signs.

# Load the binary files into VirtualBox VM NVRAM with the builtin command dmpstore
# in the VM EFI Internal Shell, for example:
# dmpstore -all -l fs0:\system-id.bin
#
# DmpStore code is available at this URL:
# https://github.com/mdaniel/virtualbox-org-svn-vbox-trunk/blob/master/src/VBox/Devices/EFI/Firmware/ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c

function generate_nvram_bin_file() {
# input: name data guid (three positional arguments, all required)
# output: function outputs nothing to stdout
#         but writes a binary file to working directory
    local namestring="${1}" # string of chars
    local filename="${namestring}"
    # represent string as string-of-hex-bytes, add null byte after every byte,
    # terminate string with two null bytes
    local name="$( for (( i = 0 ; i < ${#namestring} ; i++ )); do printf -- "${namestring:${i}:1}" | xxd -p | tr -d '\n'; printf '00'; done; printf '0000' )"
    # size of string in bytes, represented by eight hex digits, big-endian
    local namesize="$(printf "%08x" $(( ${#name} / 2 )) )"
    # flip four big-endian bytes byte-order to little-endian
    local namesize="$(printf "${namesize}" | xxd -r -p | xxd -e -g 4 | xxd -r | xxd -p)"
    # strip string-of-hex-bytes representation of data of spaces, "x", "h", etc
    local data="$(printf -- "${2}" | xxd -r -p | xxd -p)"
    # size of data in bytes, represented by eight hex digits, big-endian
    local datasize="$(printf "%08x" $(( ${#data} / 2 )) )"
    # flip four big-endian bytes byte-order to little-endian
    local datasize="$(printf "${datasize}" | xxd -r -p | xxd -e -g 4 | xxd -r | xxd -p)"
    # guid string-of-hex-bytes is five fields, 8+4+4+4+12 nibbles long
    # first three are little-endian, last two big-endian
    # for example, 0F1A2B3C-4D5E-6A7B-8C9D-A1B2C3D4E5F6
    # is stored as 3C2B1A0F-5E4D-7B6A-8C9D-A1B2C3D4E5F6
    local g="$( printf -- "${3}" | xxd -r -p | xxd -p )" # strip spaces etc
    local guid="${g:6:2} ${g:4:2} ${g:2:2} ${g:0:2} ${g:10:2} ${g:8:2} ${g:14:2} ${g:12:2} ${g:16:16}"
    # attributes in four bytes little-endian
    local attributes="07 00 00 00"
    # the data structure
    local entry="${namesize} ${datasize} ${name} ${guid} ${attributes} ${data}"
    # calculate crc32 using gzip, flip crc32 bytes into big-endian
    local crc32="$(printf "${entry}" | xxd -r -p | gzip -c | tail -c8 | xxd -p -l 4)"
    # save binary data
    printf -- "${entry} ${crc32}" | xxd -r -p - "${vm_name}_${filename}.bin"
}

# MLB
MLB_b16="$(printf -- "${MLB}" | xxd -p)"
generate_nvram_bin_file "MLB" "${MLB_b16}" "4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14"

# ROM
# Convert the mixed-ASCII-and-base16 ROM value
# into an ASCII string that represents a base16 number.
ROM_b16="$(for (( i=0; i<${#ROM}; )); do
               if [[ "${ROM:${i}:1}" == "%" ]]; then
                   let j=i+1
                   echo -n "${ROM:${j}:2}"
                   let i=i+3
               else
                   x="$(echo -n "${ROM:${i}:1}" | xxd -p | tr -d ' ')"
                   echo -n "${x}"
                   let i=i+1
               fi
            done)"
generate_nvram_bin_file "ROM" "${ROM_b16}" "4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14"

# system-id
generate_nvram_bin_file "system-id" "${SystemUUID}" "7C436110-AB2A-4BBB-A880-FE41995C9F82"

# SIP / csr-active-config
generate_nvram_bin_file "csr-active-config" "${system_integrity_protection}" "7C436110-AB2A-4BBB-A880-FE41995C9F82"
}

function create_macos_installation_files_viso() {
print_dimly "stage: create_macos_installation_files_viso"
echo "Creating EFI startup script"
echo 'echo -off' > "${vm_name}_startup.nsh"
if [[ ( "${vbox_version:0:1}" -lt 6 ) || ( "${vbox_version:0:1}" = 6 && "${vbox_version:2:1}" = 0 ) ]]; then
    echo 'load fs0:\EFI\OC\Drivers\AppleImageLoader.efi
load fs0:\EFI\OC\Drivers\AppleUiSupport.efi
load fs0:\EFI\OC\Drivers\ApfsDriverLoader.efi
map -r' >> "${vm_name}_startup.nsh"
fi
# EFI Internal Shell 2.1 (VBox 6.0) doesn't support for-loops that start with 0
echo 'if exist "fs0:\EFI\NVRAM\MLB.bin" then
  dmpstore -all -l fs0:\EFI\NVRAM\MLB.bin
  dmpstore -all -l fs0:\EFI\NVRAM\ROM.bin
  dmpstore -all -l fs0:\EFI\NVRAM\csr-active-config.bin
  dmpstore -all -l fs0:\EFI\NVRAM\system-id.bin
endif
for %a run (1 5)
  if exist "fs%a:\EFI\NVRAM\MLB.bin" then
    dmpstore -all -l fs%a:\EFI\NVRAM\MLB.bin
    dmpstore -all -l fs%a:\EFI\NVRAM\ROM.bin
    dmpstore -all -l fs%a:\EFI\NVRAM\csr-active-config.bin
    dmpstore -all -l fs%a:\EFI\NVRAM\system-id.bin
  endif
endfor
for %a run (1 5)
  if exist "fs%a:\macOS Install Data\Locked Files\Boot Files\boot.efi" then
    "fs%a:\macOS Install Data\Locked Files\Boot Files\boot.efi"
  endif
endfor
for %a run (1 5)
  if exist "fs%a:\System\Library\CoreServices\boot.efi" then
    "fs%a:\System\Library\CoreServices\boot.efi"
  endif
endfor' >> "${vm_name}_startup.nsh"

echo -e "\nCreating VirtualBox 6 virtual ISO containing the"
echo -e "installation files from swcdn.apple.com\n"
create_viso_header "${macOS_release_name}_installation_files.viso" "${macOS_release_name:0:5}-files"

# add files to viso

# Apple macOS installation files
for filename in "BaseSystem.chunklist" \
                "InstallInfo.plist" \
                "AppleDiagnostics.dmg" \
                "AppleDiagnostics.chunklist" \
                "BaseSystem.dmg" ; do
    if [[ -s "${macOS_release_name}_${filename}" ]]; then
        echo "/${filename}=\"${macOS_release_name}_${filename}\"" >> "${macOS_release_name}_installation_files.viso"
    fi
done

if [[ -s "${macOS_release_name}_InstallESD.part00" ]]; then
    for part in "${macOS_release_name}_InstallESD.part"*; do
        echo "/InstallESD${part##*InstallESD}=\"${part}\"" >> "${macOS_release_name}_installation_files.viso"
    done
fi

# NVRAM binary files
for filename in "MLB.bin" "ROM.bin" "csr-active-config.bin" "system-id.bin"; do
    if [[ -s "${vm_name}_${filename}" ]]; then
        echo "/ESP/EFI/NVRAM/${filename}=\"${vm_name}_${filename}\"" >> "${macOS_release_name}_installation_files.viso"
    fi
done

# EFI drivers for VirtualBox 6.0 and 5.2
for filename in "ApfsDriverLoader.efi" "AppleImageLoader.efi" "AppleUiSupport.efi"; do
    if [[ -s "${filename}" ]]; then
        echo "/ESP/EFI/OC/Drivers/${filename}=\"${filename}\"" >> "${macOS_release_name}_installation_files.viso"
    fi
done

# EFI startup script
echo "/ESP/startup.nsh=\"${vm_name}_startup.nsh\"" >> "${macOS_release_name}_installation_files.viso"

}

function configure_vm() {
print_dimly "stage: configure_vm"
if [[ -n "$(
            VBoxManage modifyvm "${vm_name}" --cpus "${cpu_count}" \
            --memory "${memory_size}" --vram "${gpu_vram}" --pae on \
            --boot1 none --boot2 none --boot3 none --boot4 none \
            --firmware efi --rtcuseutc on --chipset ich9 ${extension_pack_usb3_support} \
            --mouse usbtablet --keyboard usb --audiocontroller hda \
            --audiocodec stac9221 --audio=none 2>&1 >/dev/null
           )" ]]; then
    echo -e "\nError: Could not configure virtual machine \"${vm_name}\"."
    echo -e "If the VM is powered on, power off the virtual machine and resume the script or"
    echo -e "execute the stage ${low_contrast_color}configure_vm${default_color}\n"
    echo "Exiting."
    exit
fi

VBoxManage setextradata "${vm_name}" \
 "VBoxInternal2/EfiGraphicsResolution" "${resolution}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemFamily" "${DmiSystemFamily}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "${DmiSystemProduct}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemSerial" "${DmiSystemSerial}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemUuid" "${DmiSystemUuid}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiOEMVBoxVer" "${DmiOEMVBoxVer}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiOEMVBoxRev" "${DmiOEMVBoxRev}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion" "${DmiBIOSVersion}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "${DmiBoardProduct}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiBoardSerial" "${DmiBoardSerial}"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemVendor" "Apple Inc."
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/smc/0/Config/DeviceKey" \
  "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
VBoxManage setextradata "${vm_name}" \
 "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
}

# Create the macOS base system virtual disk image
function populate_basesystem_virtual_disk() {
print_dimly "stage: populate_basesystem_virtual_disk"
[[ -s "${macOS_release_name}_BaseSystem.${storage_format}" ]] && echo "${macOS_release_name}_BaseSystem.${storage_format} bootstrap virtual disk image exists." && return
[[ ! -s "${macOS_release_name}_BaseSystem.dmg" ]] && echo -e "\nCould not find ${macOS_release_name}_BaseSystem.dmg; exiting." && exit
echo "Converting BaseSystem.dmg to BaseSystem.img"
dmg2img "${macOS_release_name}_BaseSystem.dmg" "${macOS_release_name}_BaseSystem.img"
VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
VBoxManage closemedium "${macOS_release_name}_BaseSystem.${storage_format}" >/dev/null 2>&1
local success=''
VBoxManage convertfromraw --format "${storage_format}" "${macOS_release_name}_BaseSystem.img" "${macOS_release_name}_BaseSystem.${storage_format}" && local success="True"
if [[ "${success}" = "True" ]]; then
    rm "${macOS_release_name}_BaseSystem.img" 2>/dev/null
    return
fi
echo "Failed to create \"${macOS_release_name}_BaseSystem.${storage_format}\"."
if [[ "$(cat /proc/sys/kernel/osrelease 2>/dev/null)" =~ [Mm]icrosoft ]]; then
    echo -e "\nSome versions of WSL require the script to execute on a Windows filesystem path,"
    echo -e "for example   ${highlight_color}/mnt/c/Users/Public/Documents${default_color}"
    echo -e "Switch to a path on the Windows filesystem if VBoxManage.exe fails to"
    echo -e "create or open a file.\n"
fi
echo "Exiting."
exit
}

# Create the installation media virtual disk image
function create_bootable_installer_virtual_disk() {
print_dimly "stage: create_bootable_installer_virtual_disk"
if [[ -w "${macOS_release_name}_bootable_installer.${storage_format}" ]]; then
    echo "\"${macOS_release_name}_bootable_installer.${storage_format}\" virtual disk image exists."
    echo -ne "${warning_color}Delete \"${macOS_release_name}_bootable_installer.${storage_format}\"?${default_color}"
    prompt_delete_y_n
    if [[ "${delete}" == "y" ]]; then
        if [[ "$( VBoxManage list runningvms )" =~ \""${vm_name}"\" ]]
        then
            echo "\"${macOS_release_name}_bootable_installer.${storage_format}\" may be deleted"
            echo "only when the virtual machine is powered off."
            echo "Exiting."
            exit
        else
            VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
            VBoxManage closemedium "${macOS_release_name}_bootable_installer.${storage_format}" >/dev/null 2>&1
            rm "${macOS_release_name}_bootable_installer.${storage_format}"
        fi
    else
        echo "Exiting."
        exit
    fi
fi
if [[ ! -e "${macOS_release_name}_bootable_installer.${storage_format}" ]]; then
    echo "Creating ${macOS_release_name} installation media virtual disk image."
    VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
    VBoxManage closemedium "${macOS_release_name}_bootable_installer.${storage_format}" >/dev/null 2>&1
    VBoxManage createmedium --size=12000 \
                            --format "${storage_format}" \
                            --filename "${macOS_release_name}_bootable_installer.${storage_format}" \
                            --variant standard 2>/dev/tty
fi
}

function populate_bootable_installer_virtual_disk() {
print_dimly "stage: populate_bootable_installer_virtual_disk"
# Attach virtual disk images of the base system, installation, and target
# to the virtual machine
VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1

if [[ -n $(
           2>&1 VBoxManage storagectl "${vm_name}" --add sata --name SATA --hostiocache on >/dev/null
          ) ]]; then echo "Could not configure virtual machine storage controller. Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 1 --hotpluggable on \
               --type hdd --nonrotational on --medium "${macOS_release_name}_bootable_installer.${storage_format}" >/dev/null
          ) ]]; then echo "Could not attach \"${macOS_release_name}_bootable_installer.${storage_format}\". Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 2 \
               --type dvddrive --medium "${macOS_release_name}_installation_files.viso" >/dev/null
          ) ]]; then echo "Could not attach \"${macOS_release_name}_installation_files.viso\". Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 3 --hotpluggable on \
               --type hdd --nonrotational on --medium "${macOS_release_name}_BaseSystem.${storage_format}" >/dev/null
          ) ]]; then echo "Could not attach \"${macOS_release_name}_BaseSystem.${storage_format}\". Exiting."; exit; fi

echo -e "\nCreating VirtualBox 6 virtual ISO containing macOS Terminal script"
echo -e "for partitioning and populating the bootable installer virtual disk.\n"
create_viso_header "${vm_name}_populate_bootable_installer_virtual_disk.viso" "bootinst-sh"
echo "/bootinst.sh=\"${vm_name}_bootinst.txt\"" >> "${vm_name}_populate_bootable_installer_virtual_disk.viso"
# Assigning "physical" disks from largest to smallest to "${disks[]}" array
# Partitioning largest disk as APFS
# Partition second-largest disk as JHFS+
echo '# this script is executed on the macOS virtual machine' > "${vm_name}_bootinst.txt"
echo 'disks="$(diskutil list | grep -o "\*[0-9][^ ]* [GTP]B *disk[0-9]$" | grep -o "[0-9].*")" && \
disks="$(echo "${disks}" | sed -e "s/\.[0-9] T/000.0 G/" -e "s/\.[0-9] P/000000.0 G/" | sort -gr | grep -o disk[0-9] )" && \
disks=(${disks[@]}) && \
if [ -z "${disks}" ]; then echo "Could not find disks"; fi && \
[ -n "${disks[0]}" ] && \
diskutil partitionDisk "/dev/${disks[0]}" 1 GPT JHFS+ "Install" R && \' >> "${vm_name}_bootinst.txt"
# Create secondary base system on the Install disk
# and copy macOS install app files to the app directory
echo 'asr restore --source "/Volumes/'"${macOS_release_name:0:5}-files"'/BaseSystem.dmg" --target /Volumes/Install --erase --noprompt && \
app_path="$(ls -d "/Volumes/"*"Base System 1/Install"*.app)" && \
install_path="${app_path}/Contents/SharedSupport/" && \
mkdir -p "${install_path}" && cd "/Volumes/'"${macOS_release_name:0:5}-files/"'" && \
cp *.chunklist *.plist *.dmg "${install_path}" && \
echo "" && echo "Copying the several-GB InstallESD.dmg to the installer app directory" && echo "Please wait" && \
if [ -s "${install_path}/InstallESD.dmg" ]; then \
rm -f "${install_path}/InstallESD.dmg" ; fi && \
for part in InstallESD.part*; do echo "Concatenating ${part}"; cat "${part}" >> "${install_path}/InstallESD.dmg"; done && \
sed -i.bak -e "s/InstallESDDmg\.pkg/InstallESD.dmg/" -e "s/pkg\.InstallESDDmg/dmg.InstallESD/" "${install_path}InstallInfo.plist" && \
sed -i.bak2 -e "/InstallESD\.dmg/{n;N;N;N;d;}" "${install_path}InstallInfo.plist" && \' >> "${vm_name}_bootinst.txt"
# shut down the virtual machine
echo 'shutdown -h now' >> "${vm_name}_bootinst.txt"
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 4 \
               --type dvddrive --medium "${vm_name}_populate_bootable_installer_virtual_disk.viso" >/dev/null
          ) ]]; then echo "Could not attach \"${vm_name}_populate_bootable_installer_virtual_disk.viso\". Exiting."; exit; fi
echo -e "\nStarting virtual machine \"${vm_name}\".
This should take a couple of minutes. If booting fails, exit the script by
pressing CTRL-C then see the documentation for information about applying
different CPU profiles in the section ${highlight_color}CPU profiles and CPUID settings${default_color}."
( VBoxManage startvm "${vm_name}" >/dev/null 2>&1 )
echo -e "\nUntil the script completes, please do not manually interact with\nthe virtual machine."
[[ -z "${kscd}" ]] && declare_scancode_dict
prompt_lang_utils_terminal
kbstring='/Volumes/bootinst-sh/bootinst.sh'
send_keys
send_enter
echo -e "\nPartitioning the bootable installer virtual disk; loading base system onto the
installer virtual disk; moving installation files to installer virtual disk;
updating the InstallInfo.plist file; and rebooting the virtual machine.

The virtual machine may report that disk space is critically low; this is fine.

When the bootable installer virtual disk is finished being populated, the script
will shut down the virtual machine. After shutdown, the initial base system will
be detached from the VM and released from VirtualBox."
print_dimly "If the partitioning fails, exit the script by pressing CTRL-C"
print_dimly "Otherwise, please wait."
while [[ "$( VBoxManage list runningvms )" =~ \""${vm_name}"\" ]]; do sleep 2 >/dev/null 2>&1; done
echo "Waiting for the VirtualBox GUI to shut off."
animated_please_wait 10
# Detach the original 2GB BaseSystem virtual disk image
# and release basesystem VDI from VirtualBox configuration
if [[ -n $(
    2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 3 --medium none >/dev/null
    2>&1 VBoxManage closemedium "${macOS_release_name}_BaseSystem.${storage_format}" >/dev/null
    ) ]]; then
    echo "Could not detach ${macOS_release_name}_BaseSystem.${storage_format}"
    echo "The script will try to detach the virtual disk image. If this takes more than"
    echo "a few seconds, terminate the script with CTRL-C, manually shut down VirtualBox,"
    echo "and resume with the following stages as described in the documentation:"
    echo "      ${highlight_color}create_target_virtual_disk populate_macos_target_disk${default_color}"
    while [[ -n $(
        2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 3 --medium none >/dev/null
        2>&1 VBoxManage closemedium "${macOS_release_name}_BaseSystem.${storage_format}" >/dev/null
        ) ]]; do
        animated_please_wait 10
    done
fi
echo -e "\n${macOS_release_name}_BaseSystem.${storage_format} successfully detached from"
echo "the virtual machine and released from VirtualBox Manager."
}

function create_target_virtual_disk() {
print_dimly "stage: create_target_virtual_disk"
if [[ -w "${vm_name}.${storage_format}" ]]; then
    echo "${vm_name}.${storage_format} target system virtual disk image exists."
    echo -ne "${warning_color}Delete \"${vm_name}.${storage_format}\"?${default_color}"
    prompt_delete_y_n
    if [[ "${delete}" == "y" ]]; then
        if [[ "$( VBoxManage list runningvms )" =~ \""${vm_name}"\" ]]
        then
            echo "\"${vm_name}.${storage_format}\" may be deleted"
            echo "only when the virtual machine is powered off."
            echo "Exiting."
            exit
        else
            VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
            VBoxManage closemedium "${vm_name}.${storage_format}" >/dev/null 2>&1
            rm "${vm_name}.${storage_format}"
        fi
    else
        echo "Exiting."
        exit
    fi
fi
if [[ "${macOS_release_name}" = "Catalina" && "${storage_size}" -lt 25000 ]]; then
    echo "Attempting to install macOS Catalina on a disk smaller than 25000MB will fail."
    echo "Please assign a larger virtual disk image size. Exiting."
    exit
elif [[ "${storage_size}" -lt 22000 ]]; then
    echo "Attempting to install macOS on a disk smaller than 22000MB will fail."
    echo "Please assign a larger virtual disk image size. Exiting."
    exit
fi
if [[ ! -e "${vm_name}.${storage_format}" ]]; then
    echo "Creating target system virtual disk image for \"${vm_name}\""
    VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
    VBoxManage closemedium "${vm_name}.${storage_format}" >/dev/null 2>&1
    VBoxManage createmedium --size="${storage_size}" \
                            --format "${storage_format}" \
                            --filename "${vm_name}.${storage_format}" \
                            --variant standard 2>/dev/tty
fi
}

function populate_macos_target_disk() {
print_dimly "stage: populate_macos_target_disk"
if [[ "$( VBoxManage list runningvms )" =~ \""${vm_name}"\" ]]; then
    echo -e "${highlight_color}Please ${warning_color}manually${highlight_color} shut down the virtual machine and press enter to continue.${default_color}"
    clear_input_buffer_then_read
fi
VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
if [[ -n $(
           2>&1 VBoxManage storagectl "${vm_name}" --add sata --name SATA --hostiocache on >/dev/null
          ) ]]; then echo "Could not configure virtual machine storage controller. Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 0 \
               --type hdd --nonrotational on --medium "${vm_name}.${storage_format}" >/dev/null
          ) ]]; then echo "Could not attach \"${vm_name}.${storage_format}\". Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 1 --hotpluggable on \
               --type hdd --nonrotational on --medium "${macOS_release_name}_bootable_installer.${storage_format}" >/dev/null
          ) ]]; then echo "Could not attach \"${macOS_release_name}_bootable_installer.${storage_format}\". Exiting."; exit; fi
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 2 \
               --type dvddrive --medium "${macOS_release_name}_installation_files.viso" >/dev/null
          ) ]]; then echo "Could not attach \"${macOS_release_name}_installation_files.viso\". Exiting."; exit; fi

echo -e "\nCreating VirtualBox 6 virtual ISO containing macOS Terminal scripts"
echo -e "for partitioning and populating the target virtual disk.\n"
create_viso_header "${vm_name}_populate_macos_target_disk.viso" "target-sh"
echo "/nvram.sh=\"${vm_name}_configure_nvram.txt\"" >> "${vm_name}_populate_macos_target_disk.viso"
echo "/startosinstall.sh=\"${vm_name}_startosinstall.txt\"" >> "${vm_name}_populate_macos_target_disk.viso"
# execute script concurrently, catch SIGUSR1 when installer finishes preparing
echo '# this script is executed on the macOS virtual machine' > "${vm_name}_configure_nvram.txt"
echo 'printf '"'"'trap "exit 0" SIGUSR1; while true; do sleep 10; done;'"'"' | sh && \
disks="$(diskutil list | grep -o "[0-9][^ ]* [GTP]B *disk[0-9]$")" && \
disks="$(echo "${disks}" | sed -e "s/\.[0-9] T/000.0 G/" -e "s/\.[0-9] P/000000.0 G/" | sort -gr | grep -o disk[0-9])" && \
disks=(${disks[@]}) && \
mkdir -p "/Volumes/'"${vm_name}"'/tmp/mount_efi" && \
mount_msdos /dev/${disks[0]}s1 "/Volumes/'"${vm_name}"'/tmp/mount_efi" && \
cp -r "/Volumes/'"${macOS_release_name:0:5}-files"'/ESP/"* "/Volumes/'"${vm_name}"'/tmp/mount_efi/" && \
installer_pid=$(ps | grep startosinstall | grep -v grep | cut -d '"'"' '"'"' -f 3) && \
kill -SIGUSR1 ${installer_pid}' >> "${vm_name}_configure_nvram.txt"
# Find background process PID, then
# start the installer, send SIGUSR1 to concurrent bash script,
# the other script copies files to EFI system partition,
# then sends SIGUSR1 to the installer which restarts the virtual machine
echo '# this script is executed on the macOS virtual machine' > "${vm_name}_startosinstall.txt"
echo 'background_pid="$(ps | grep '"'"' sh$'"'"' | cut -d '"'"' '"'"' -f 3)" && \
[[ "${background_pid}" =~ ^[0-9][0-9]*$ ]] && \
disks="$(diskutil list | grep -o "[0-9][^ ]* [GTP]B *disk[0-9]$")" && \
disks="$(echo "${disks}" | sed -e "s/\.[0-9] T/000.0 G/" -e "s/\.[0-9] P/000000.0 G/" | sort -gr | grep -o disk[0-9])" && \
disks=(${disks[@]}) && \
[ -n "${disks[0]}" ] && \
diskutil partitionDisk "/dev/${disks[0]}" 1 GPT APFS "'"${vm_name}"'" R && \
app_path="$(ls -d /Install*.app)" && \
cd "/${app_path}/Contents/Resources/" && \
./startosinstall --agreetolicense --pidtosignal ${background_pid} --rebootdelay 90 --volume "/Volumes/'"${vm_name}"'"' >> "${vm_name}_startosinstall.txt"
if [[ -n $(
           2>&1 VBoxManage storageattach "${vm_name}" --storagectl SATA --port 3 \
               --type dvddrive --medium "${vm_name}_populate_macos_target_disk.viso" >/dev/null
          ) ]]; then echo "Could not attach \"${vm_name}_populate_macos_target_disk.viso\". Exiting."; exit; fi
echo "The VM will boot from the populated installer base system virtual disk."
( VBoxManage startvm "${vm_name}" >/dev/null 2>&1 )
[[ -z "${kscd}" ]] && declare_scancode_dict
prompt_lang_utils_terminal
add_another_terminal
echo -e "\nThe second open Terminal in the virtual machine copies EFI and NVRAM files"
echo -e "to the target EFI system partition when the installer finishes preparing."
echo -e "\nAfter the installer finishes preparing and the EFI and NVRAM files are copied,"
echo -ne "macOS will install and boot up when booting the target disk.\n"
print_dimly "Please wait"
kbstring='/Volumes/target-sh/nvram.sh'
send_keys
send_enter
cycle_through_terminal_windows
kbstring='/Volumes/target-sh/startosinstall.sh'
send_keys
send_enter
if [[ ! ( "${vbox_version:0:1}" -gt 6
        || ( "${vbox_version:0:1}" = 6 && "${vbox_version:2:1}" -ge 1 ) ) ]]; then
    echo -e "\n${highlight_color}When the installer finishes preparing and reboots the VM, press enter${default_color} so the script
powers off the virtual machine and detaches the device \"${macOS_release_name}_bootable_installer.${storage_format}\" to avoid
booting into the initial installer environment again."
    clear_input_buffer_then_read
    VBoxManage controlvm "${vm_name}" poweroff >/dev/null 2>&1
    for (( i=10; i>0; i-- )); do echo -ne "   \r${i} "; sleep 0.5; done; echo -ne "\r   "
    VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
    VBoxManage storagectl "${vm_name}" --add sata --name SATA --hostiocache on >/dev/null 2>&1
    VBoxManage storageattach "${vm_name}" --storagectl SATA --port 0 \
               --type hdd --nonrotational on --medium "${vm_name}.${storage_format}"
fi
echo -e "\nFor further information, such as applying EFI and NVRAM variables to enable
iMessage connectivity, see the documentation with the following command:\n"
would_you_like_to_know_less
echo -e "\n${highlight_color}If the Terminal window progress counter reaches 100% and reboots into${default_color}"
echo -e "${highlight_color}an Apple macOS installer progress bar, that's it! Enjoy your virtual machine.${default_color}\n"
}

function prompt_delete_temporary_files() {
print_dimly "stage: prompt_delete_temporary_files"
if [[ ! "$(VBoxManage showvminfo "${vm_name}")" =~ State:[\ \t]*powered\ off ]]
then
    echo -e "Temporary files may be deleted when the virtual machine is powered off
and without a suspended state by executing the following command at the script's
working directory:

  ${highlight_color}${0} prompt_delete_temporary_files${default_color}"
else
    # detach temporary VDIs and attach the macOS target disk
    VBoxManage storagectl "${vm_name}" --remove --name SATA >/dev/null 2>&1
    VBoxManage storagectl "${vm_name}" --add sata --name SATA --hostiocache on >/dev/null 2>&1
    if [[ -s "${vm_name}.${storage_format}" ]]; then
        VBoxManage storageattach "${vm_name}" --storagectl SATA --port 0 \
                   --type hdd --nonrotational on --medium "${vm_name}.${storage_format}"
    fi
    VBoxManage closemedium "${macOS_release_name}_bootable_installer.${storage_format}" >/dev/null 2>&1
    VBoxManage closemedium "${macOS_release_name}_BaseSystem.${storage_format}" >/dev/null 2>&1
    echo -e "The following temporary files are safe to delete:\n"
    temporary_files=("${macOS_release_name}_Apple"*
                     "${macOS_release_name}_BaseSystem"*
                     "${macOS_release_name}_Install"*
                     "${macOS_release_name}_bootable_installer"*
                     "${macOS_release_name}_"*".viso"
                     "${vm_name}_"*".png"
                     "${vm_name}_"*".bin"
                     "${vm_name}_"*".txt"
                     "${vm_name}_"*".viso"
                     "${vm_name}_startup.nsh"
                     "ApfsDriverLoader.efi"
                     "Apple"*".efi"
                     "AppleSupport-v2.0.4-RELEASE.zip"
                     "dmg2img.exe")
    ls -d "${temporary_files[@]}" 2>/dev/null
    echo -ne "\n${warning_color}Delete temporary files listed above?${default_color}"
    prompt_delete_y_n
    if [[ "${delete}" == "y" ]]; then
        rm -f "${temporary_files[@]}" 2>/dev/null
    fi
fi
}

function and_all_subsequent_stages() {
    # if exactly two arguments were specified on the command line, and the first is a stage title,
    # then perform all stages subsequent to the specified stage, otherwise do nothing.
    [[ ${#specified_arguments[@]} -ne 2 ]] && return
    for stage in "${stages[@]}"; do
        [[ "${stages[0]}" = "${specified_arguments[0]}" ]] && break
        stages=( "${stages[@]:1}" )
    done
    for stage in "${stages[@]:1}"; do ${stage}; done
}

function documentation() {
low_contrast_stages=""
for stage in "${stages[@]}"; do
    low_contrast_stages="${low_contrast_stages}"'    '"${low_contrast_color}${stage}${default_color}"$'\n'
done
echo -ne "\n        ${highlight_color}NAME${default_color}
Push-button installer of macOS on VirtualBox

        ${highlight_color}DESCRIPTION${default_color}
The script downloads macOS High Sierra, Mojave, and Catalina from Apple servers
and installs them on VirtualBox 5.2, 6.0, and 6.1. The script doesn't install
any closed-source additions or bootloaders. A default install requires the user
press enter when prompted, less than ten times, to complete the installation.
Systems with the package ${low_contrast_color}tesseract-ocr${default_color} may automate the installation completely.

        ${highlight_color}USAGE${default_color}
    ${low_contrast_color}${0} [STAGE]... ${default_color}

The installation is divided into stages. Stage titles may be given as command-
line arguments for the script. When the script is executed with no command-line
arguments, each of the stages is performed in succession in the order listed:

    ${low_contrast_color}check_shell${default_color}
${low_contrast_stages}
Other than the stages above, the command-line arguments \"${low_contrast_color}documentation${default_color}\",
\"${low_contrast_color}troubleshoot${default_color}\", and \"${low_contrast_color}and_all_subsequent_stages${default_color}\" are available. \"${low_contrast_color}troubleshoot${default_color}\"
generates a file with system information, VirtualBox logs, and checksums for
some installation files. \"${low_contrast_color}documentation${default_color}\" outputs the script's documentation.
If \"${low_contrast_color}documentation${default_color}\" is the first argument, no other arguments are parsed.
If the first argument is a stage title and the only other argument is
\"${low_contrast_color}and_all_subsequent_stages${default_color}\", then the speficied stage and all subsequent
stages are performed in succession in the order listed above;
otherwise, \"${low_contrast_color}and_all_subsequent_stages${default_color}\" does not perform any stages.

The stage \"${low_contrast_color}check_shell${default_color}\" is always performed when the script loads.

The stages \"${low_contrast_color}check_gnu_coreutils_prefix${default_color}\", \"${low_contrast_color}set_variables${default_color}\", and
\"${low_contrast_color}check_dependencies${default_color}\" are always performed when any stage title other than
\"${low_contrast_color}documentation${default_color}\" is specified as the first argument, and the rest of the
specified stages are performed only after the checks pass.

        ${highlight_color}EXAMPLES${default_color}
    ${low_contrast_color}${0} create_vm configure_vm${default_color}

The above command might be used to create and configure a virtual machine on a
new VirtualBox installation, then manually attach to the new virtual machine
an existing macOS disk image that was previously created by the script.

    ${low_contrast_color}${0} prompt_delete_temporary_files${default_color}

The above command might be used when no more virtual machines need to be
installed, and the temporary files can be deleted.

    ${low_contrast_color}${0} configure_vm and_all_subsequent_stages${default_color}

The above command might be used to resume the script stages after the stage
\"${low_contrast_color}configure_vm${default_color}\" failed.

    ${low_contrast_color}${0} "'\\'"${default_color}
${low_contrast_color}configure_vm create_nvram_files create_macos_installation_files_viso${default_color}

The above command might be used to update the EFI and NVRAM variables required
for iCloud and iMessage connectivity and other Apple-connected apps.

        ${highlight_color}Configuration${default_color}
The script's default configuration is stored in the ${low_contrast_color}set_variables()${default_color} function at
the top of the script. No manual configuration is required to use the script.

The configuration may be manually edited either by editing the variable
assignment in ${low_contrast_color}set_variables()${default_color} or by executing the following command:

    ${low_contrast_color}export macos_vm_vars_file=/path/to/variable_assignment_file${default_color}

\"${low_contrast_color}variable_assignment_file${default_color}\" is a plain text file that contains zero or more
lines with a variable assignment for any variable specified in ${low_contrast_color}set_variables()${default_color},
for example ${low_contrast_color}macOS_release_name=\"HighSierra\"${default_color} or ${low_contrast_color}DmiSystemFamily=\"iMac\"${default_color}

        ${highlight_color}iCloud and iMessage connectivity${default_color}
iCloud, iMessage, and other connected Apple services require a valid device
name and serial number, board ID and serial number, and other genuine
(or genuine-like) Apple parameters. Assigning these parameters is ${low_contrast_color}not required${default_color}
when installing or using macOS, only when connecting to the iCloud app,
iMessage, and other apps that authenticate the device with Apple.

These are the variables that are usually required for iMessage connectivity:

    ${low_contrast_color}DmiSystemFamily    # Model name${default_color}
    ${low_contrast_color}DmiSystemProduct   # Model identifier${default_color}
    ${low_contrast_color}DmiBIOSVersion     # Boot ROM version${default_color}
    ${low_contrast_color}DmiSystemSerial    # System serial number${default_color}
    ${low_contrast_color}DmiSystemUuid      # Hardware unique identifier${default_color}
    ${low_contrast_color}ROM                # ROM identifier, stored in NVRAM${default_color}
    ${low_contrast_color}MLB                # Main Logic Board serial, stored in NVRAM${default_color}
    ${low_contrast_color}DmiBoardSerial     # Main Logic Board serial, stored in EFI${default_color}
    ${low_contrast_color}DmiBoardProduct    # Product (board) identifier${default_color}
    ${low_contrast_color}SystemUUID         # System unique identifier, stored in NVRAM${default_color}

These parameters may be manually set in the ${low_contrast_color}set_variables()${default_color} function when the
\"${low_contrast_color}get_parameters_from_macOS_host${default_color}\" is set to \"${low_contrast_color}no${default_color}\", which is the default setting. When
the script is executed on macOS and the variable \"${low_contrast_color}get_parameters_from_macOS_host${default_color}\" is
set to \"${low_contrast_color}yes${default_color}\", the script copies the parameters from the host.

        ${highlight_color}Applying the EFI and NVRAM parameters${default_color}
The EFI and NVRAM parameters may be set in the script before installation by
editing them at the top of the script. NVRAM parameters may be applied after
the last step of the installation by resetting the virtual machine and booting
into the EFI Internal Shell. When resetting or powering up the VM, immediately
press Esc when the VirtualBox logo appears. This boots into the EFI Internal
Shell or the boot menu. If the boot menu appears, select \"Boot Manager\" and
then \"EFI Internal Shell\" and then allow the ${low_contrast_color}startup.nsh${default_color} script to execute
automatically, applying the NVRAM variables before booting macOS.

        ${highlight_color}Changing the EFI and NVRAM parameters after installation${default_color}
The variables mentioned above may be edited and applied to an existing macOS
virtual machine by deleting the ${low_contrast_color}.nvram${default_color} file from the directory where the
virtual machine ${low_contrast_color}.vbox${default_color} file is stored, then executing the following
command and copying the generated files to the macOS EFI System Partition:

    ${low_contrast_color}${0} "'\\'"${default_color}
${low_contrast_color}configure_vm create_nvram_files create_macos_installation_files_viso${default_color}

After executing the command, attach the resulting VISO file to the virtual
machine's storage through VirtualBox Manager or VBoxManage. Power up the VM
and boot macOS, then start Terminal and execute the following commands, making
sure to replace \"[VISO_mountpoint]\" with the correct path:

    ${low_contrast_color}mkdir ESP${default_color}
    ${low_contrast_color}sudo su # this will prompt for a password${default_color}
    ${low_contrast_color}diskutil mount -mountPoint ESP disk0s1${default_color}
    ${low_contrast_color}cp -r /Volumes/[VISO_mountpoint]/ESP/* ESP/${default_color}

After copying the files, boot into the EFI Internal Shell as described in the
section \"Applying the EFI and NVRAM parameters\".

        ${highlight_color}Storage format${default_color}
The script by default assigns a target virtual disk storage format of VDI. This
format can be resized by VirtualBox as explained in the next section. The other
available format, VMDK, cannot be resized by VirtualBox but can be attached to
a QEMU virtual machine for use with Linux KVM for better performance.

        ${highlight_color}Storage size${default_color}
The script by default assigns a target virtual disk storage size of 80GB, which
is populated to about 25GB on the host on initial installation. After the
installation is complete, the VDI storage size may be increased. First increase
the virtual disk image size through VirtualBox Manager or VBoxManage, then in
Terminal in the virtual machine execute the following command:
    ${low_contrast_color}sudo diskutil repairDisk disk0${default_color}
After it completes, open Disk Utility and delete the \"Free space\" partition so
it allows the system APFS container to take up the available space, or if that
fails, execute the following command:
    ${low_contrast_color}sudo diskutil apfs resizeContainer disk1 0${default_color}
Both Disk Utility and ${low_contrast_color}diskutil${default_color} may fail and require successive resize attempts
separated by virtual machine reboots.

        ${highlight_color}Primary display resolution${default_color}
The following command assigns the virtual machine primary display resolution:
    ${low_contrast_color}VBoxManage setextradata \"\${vm_name}\" \\${default_color}
${low_contrast_color}\"VBoxInternal2/EfiGraphicsResolution\" \"\${resolution}\"${default_color}
The following primary display resolutions are supported by macOS on VirtualBox:
  ${low_contrast_color}5120x2880  2880x1800  2560x1600  2560x1440  1920x1200  1600x1200  1680x1050${default_color}
  ${low_contrast_color}1440x900   1280x800   1024x768   640x480${default_color}
Secondary displays can have an arbitrary resolution.

        ${highlight_color}Unsupported features${default_color}
Developing and maintaining VirtualBox or macOS features is beyond the scope of
this script. Some features may behave unexpectedly, such as USB device support,
audio support, FileVault boot password prompt support, and other features.

        ${highlight_color}CPU profiles and CPUID settings${default_color} (unsupported)
macOS does not support every CPU supported by VirtualBox. If the macOS Base
System does not boot, try applying different CPU profiles to the virtual
machine with the ${low_contrast_color}VBoxManage${default_color} commands described below. First, while the
VM is powered off, set the guest's CPU profile to the host's CPU profile, then
try to boot the virtual machine:
    ${low_contrast_color}VBoxManage modifyvm \"\${vm_name}\" --cpu-profile host${default_color}
    ${low_contrast_color}VBoxManage modifyvm \"\${vm_name}\" --cpuidremoveall${default_color}
If booting fails, try assigning each of the preconfigured CPU profiles while
the VM is powered off with the following command:
    ${low_contrast_color}VBoxManage modifyvm \"\${vm_name}\" --cpu-profile \"\${cpu_profile}\"${default_color}
Available CPU profiles:
  ${low_contrast_color}\"Intel Xeon X5482 3.20GHz\"  \"Intel Core i7-2635QM\"  \"Intel Core i7-3960X\"${default_color}
  ${low_contrast_color}\"Intel Core i5-3570\"  \"Intel Core i7-5600U\"  \"Intel Core i7-6700K\"${default_color}
If booting fails after trying each preconfigured CPU profile, the host's CPU
requires specific ${highlight_color}macOS VirtualBox CPUID settings${default_color}.

        ${highlight_color}Performance and deployment${default_color} (unsupported)
After successfully creating a working macOS virtual machine, consider importing
the virtual machine into more performant virtualization software, or packaging
it for configuration management platforms for automated deployment. These
virtualization and deployment applications require additional configuration
that is beyond the scope of the script.

QEMU with KVM is capable of providing virtual machine hardware passthrough
for near-native performance. QEMU supports the VMDK virtual disk image format,
which can be configured to be created by the script, or converted from the
default VirtualBox VDI format into the VMDK format with the following command:
    ${low_contrast_color}VBoxManage clonehd --format vmdk source.vdi target.vmdk${default_color}
QEMU and KVM require additional configuration that is beyond the scope of the
script.

        ${highlight_color}VirtualBox Native Execution Manager${default_color} (unsupported)
The VirtualBox Native Execution Manager (NEM) is an experimental VirtualBox
feature. VirtualBox uses NEM when access to VT-x and AMD-V is blocked by
virtualization software or execution protection features such as Hyper-V,
Windows Sandbox, WSL2, memory integrity protection, and other software.
macOS and the macOS installer have memory corruption issues under NEM
virtualization. The script checks for NEM and exits with an error message if
NEM is detected.

        ${highlight_color}Bootloaders${default_color} (unsupported)
The macOS VirtualBox guest is loaded without extra bootloaders, but it is
compatible with OpenCore. OpenCore requires additional configuration that is
beyond the scope of the script.

        ${highlight_color}Display scaling${default_color} (unsupported)
VirtualBox does not supply an EDID for its virtual display, and macOS does not
enable display scaling (high PPI) without an EDID. The bootloader OpenCore can
inject an EDID which enables display scaling.

        ${highlight_color}Audio${default_color} (unsupported)
macOS may not support any built-in VirtualBox audio controllers. The bootloader
OpenCore may be able to load open-source audio drivers in VirtualBox.

        ${highlight_color}FileVault${default_color} (unsupported)
The VirtualBox EFI implementation does not properly load the FileVault full disk
encryption password prompt upon boot. The bootloader OpenCore is be able to
load the password prompt with the parameter \"ProvideConsoleGop\" set to \"true\".

        ${highlight_color}Further information${default_color}
Further information is available at the following URL:
        ${highlight_color}https://github.com/myspaghetti/macos-virtualbox${default_color}

"
}

function troubleshoot() {
echo -ne "\nWriting troubleshooting information to \"${highlight_color}${vm_name}_troubleshoot.txt${default_color}\"\n\n"
echo "The file will contain system information, VirtualBox paths, logs, configuration,"
echo "macOS virtual machine details including ${highlight_color}serials entered in the script${default_color},"
echo "and macOS installation file md5 checksums."
echo "When sharing this file, mind that it contains the above information."
echo ""
for wrapper in 1; do
    echo "################################################################################"
    head -n 5 "${0}"
    if [[ -n "$(md5sum --version 2>/dev/null)" ]]; then
        tail -n +60 "${0}" | md5sum 2>/dev/null
    else
        tail -n +60 "${0}" | md5 2>/dev/null
    fi
    echo "################################################################################"
    echo "BASH_VERSION ${BASH_VERSION}"
    vbox_ver="$(VBoxManage -v)"
    echo "VBOX_VERSION ${vbox_ver//[$'\r\n']/}"
    macos_ver="$(sw_vers 2>/dev/null)"
    wsl_ver="$(cat /proc/sys/kernel/osrelease 2>/dev/null)"
    win_ver="$(cmd.exe /d/s/c call ver 2>/dev/null)"
    echo "OS VERSION ${macos_ver}${wsl_ver}${win_ver//[$'\r\n']/}"
    echo "################################################################################"
    echo "vbox.log"
    VBoxManage showvminfo "${vm_name}" --log 0 2>&1
    echo "################################################################################"
    echo "vminfo"
    VBoxManage showvminfo "${vm_name}" --machinereadable --details 2>&1
    VBoxManage getextradata "${vm_name}" 2>&1
done > "${vm_name}_troubleshoot.txt"
echo "Written configuration and logs to \"${highlight_color}${vm_name}_troubleshoot.txt${default_color}\""
echo "Press CTRL-C to cancel checksums, or wait for checksumming to complete."
for wrapper in 1; do
    echo "################################################################################"
    echo "md5 hashes"
    if [[ -n "$(md5sum --version 2>/dev/null)" ]]; then
        md5sum "${macOS_release_name}_BaseSystem"* 2>/dev/null
        md5sum "${macOS_release_name}_Install"* 2>/dev/null
        md5sum "${macOS_release_name}_Apple"* 2>/dev/null
    else
        md5 "${macOS_release_name}_BaseSystem"* 2>/dev/null
        md5 "${macOS_release_name}_Install"* 2>/dev/null
        md5 "${macOS_release_name}_Apple"* 2>/dev/null
    fi
    echo "################################################################################"
done >> "${vm_name}_troubleshoot.txt"
if [ -s "${vm_name}_troubleshoot.txt" ]; then
echo -ne "\nFinished writing to \"${highlight_color}${vm_name}_troubleshoot.txt${default_color}\"\n"
fi
}

# GLOBAL VARIABLES AND FUNCTIONS THAT MIGHT BE CALLED MORE THAN ONCE

# terminal text colors
warning_color=$'\e[48;2;255;0;0m\e[38;2;255;255;255m' # white on red
highlight_color=$'\e[48;2;0;0;9m\e[38;2;255;255;255m' # white on black
low_contrast_color=$'\e[48;2;0;0;9m\e[38;2;128;128;128m' # grey on black
default_color=$'\033[0m'

# prints positional parameters in low contrast preceded and followed by newline
function print_dimly() {
echo -e "\n${low_contrast_color}$@${default_color}"
}

# don't need sleep when we can read!
function sleep() {
    read -t "${1}" >/dev/null 2>&1
}

# create a viso with no files
function create_viso_header() {
    # input: filename volume-id (two positional parameters, both required)
    # output: nothing to stdout, viso file to working directory
    local uuid="$(xxd -p -l 16 /dev/urandom)"
    local uuid="${uuid:0:8}-${uuid:8:4}-${uuid:12:4}-${uuid:16:4}-${uuid:20:12}"
    echo "--iprt-iso-maker-file-marker-bourne-sh ${uuid}
    --volume-id=${2}" > "${1}"
}

# QWERTY-to-scancode dictionary. Hex scancodes, keydown and keyup event.
# Virtualbox Mac scancodes found here:
# https://wiki.osdev.org/PS/2_Keyboard#Scan_Code_Set_1
# First half of hex code - press, second half - release, unless otherwise specified
function declare_scancode_dict() {
    declare -gA kscd
    kscd=(
        ["ESC"]="01 81"
        ["1"]="02 82"
        ["2"]="03 83"
        ["3"]="04 84"
        ["4"]="05 85"
        ["5"]="06 86"
        ["6"]="07 87"
        ["7"]="08 88"
        ["8"]="09 89"
        ["9"]="0A 8A"
        ["0"]="0B 8B"
        ["-"]="0C 8C"
        ["="]="0D 8D"
        ["BKSP"]="0E 8E"
        ["TAB"]="0F 8F"
        ["q"]="10 90"
        ["w"]="11 91"
        ["e"]="12 92"
        ["r"]="13 93"
        ["t"]="14 94"
        ["y"]="15 95"
        ["u"]="16 96"
        ["i"]="17 97"
        ["o"]="18 98"
        ["p"]="19 99"
        ["["]="1A 9A"
        ["]"]="1B 9B"
        ["ENTER"]="1C 9C"
        ["CTRLprs"]="1D"
        ["CTRLrls"]="9D"
        ["a"]="1E 9E"
        ["s"]="1F 9F"
        ["d"]="20 A0"
        ["f"]="21 A1"
        ["g"]="22 A2"
        ["h"]="23 A3"
        ["j"]="24 A4"
        ["k"]="25 A5"
        ["l"]="26 A6"
        [";"]="27 A7"
        ["'"]="28 A8"
        ['`']="29 A9"
        ["LSHIFTprs"]="2A"
        ["LSHIFTrls"]="AA"
        ['\']="2B AB"
        ["z"]="2C AC"
        ["x"]="2D AD"
        ["c"]="2E AE"
        ["v"]="2F AF"
        ["b"]="30 B0"
        ["n"]="31 B1"
        ["m"]="32 B2"
        [","]="33 B3"
        ["."]="34 B4"
        ["/"]="35 B5"
        ["RSHIFTprs"]="36"
        ["RSHIFTrls"]="B6"
        ["ALTprs"]="38"
        ["ALTrls"]="B8"
        ["LALT"]="38 B8"
        ["SPACE"]="39 B9"
        [" "]="39 B9"
        ["CAPS"]="3A BA"
        ["CAPSLOCK"]="3A BA"
        ["F1"]="3B BB"
        ["F2"]="3C BC"
        ["F3"]="3D BD"
        ["F4"]="3E BE"
        ["F5"]="3F BF"
        ["F6"]="40 C0"
        ["F7"]="41 C1"
        ["F8"]="42 C2"
        ["F9"]="43 C3"
        ["F10"]="44 C4"
        ["UP"]="E0 48 E0 C8"
        ["RIGHT"]="E0 4D E0 CD"
        ["LEFT"]="E0 4B E0 CB"
        ["DOWN"]="E0 50 E0 D0"
        ["HOME"]="E0 47 E0 C7"
        ["END"]="E0 4F E0 CF"
        ["PGUP"]="E0 49 E0 C9"
        ["PGDN"]="E0 51 E0 D1"
        ["CMDprs"]="E0 5C"
        ["CMDrls"]="E0 DC"
        # all codes below start with LSHIFTprs as commented in first item:
        ["!"]="2A 02 82 AA" # LSHIFTprs 1prs 1rls LSHIFTrls
        ["@"]="2A 03 83 AA"
        ["#"]="2A 04 84 AA"
        ["$"]="2A 05 85 AA"
        ["%"]="2A 06 86 AA"
        ["^"]="2A 07 87 AA"
        ["&"]="2A 08 88 AA"
        ["*"]="2A 09 89 AA"
        ["("]="2A 0A 8A AA"
        [")"]="2A 0B 8B AA"
        ["_"]="2A 0C 8C AA"
        ["+"]="2A 0D 8D AA"
        ["Q"]="2A 10 90 AA"
        ["W"]="2A 11 91 AA"
        ["E"]="2A 12 92 AA"
        ["R"]="2A 13 93 AA"
        ["T"]="2A 14 94 AA"
        ["Y"]="2A 15 95 AA"
        ["U"]="2A 16 96 AA"
        ["I"]="2A 17 97 AA"
        ["O"]="2A 18 98 AA"
        ["P"]="2A 19 99 AA"
        ["{"]="2A 1A 9A AA"
        ["}"]="2A 1B 9B AA"
        ["A"]="2A 1E 9E AA"
        ["S"]="2A 1F 9F AA"
        ["D"]="2A 20 A0 AA"
        ["F"]="2A 21 A1 AA"
        ["G"]="2A 22 A2 AA"
        ["H"]="2A 23 A3 AA"
        ["J"]="2A 24 A4 AA"
        ["K"]="2A 25 A5 AA"
        ["L"]="2A 26 A6 AA"
        [":"]="2A 27 A7 AA"
        ['"']="2A 28 A8 AA"
        ["~"]="2A 29 A9 AA"
        ["|"]="2A 2B AB AA"
        ["Z"]="2A 2C AC AA"
        ["X"]="2A 2D AD AA"
        ["C"]="2A 2E AE AA"
        ["V"]="2A 2F AF AA"
        ["B"]="2A 30 B0 AA"
        ["N"]="2A 31 B1 AA"
        ["M"]="2A 32 B2 AA"
        ["<"]="2A 33 B3 AA"
        [">"]="2A 34 B4 AA"
        ["?"]="2A 35 B5 AA"
    )
}

function clear_input_buffer_then_read() {
    while read -d '' -r -t 0; do read -d '' -t 0.1 -n 10000; break; done
    [[ $- =~ i ]] && read || echo ""
}

# read variable kbstring and convert string to scancodes and send to guest vm
function send_keys() {
    # It's faster to send all the scancodes at once, but some VM configurations
    # accept scancodes sent by multiple VBoxManage commands concurrently instead
    # of sequentially, and there's no built-in method to tell the host to wait
    # until the scancodes have finished being entered.
    # This leaves only the slow, keypress-by-keypress method.
    for (( i=0; i < ${#kbstring}; i++ )); do
        VBoxManage controlvm "${vm_name}" keyboardputscancode ${kscd[${kbstring:${i}:1}]} 1>/dev/null 2>&1
    done
}

# read variable kbspecial and send keystrokes by name,
# for example "CTRLprs c CTRLrls", and send to guest vm
function send_special() {
    for keypress in ${kbspecial}; do
        VBoxManage controlvm "${vm_name}" keyboardputscancode ${kscd[${keypress}]} 1>/dev/null 2>&1
    done
}

function send_enter() {
    kbspecial="ENTER"
    send_special
}

function prompt_lang_utils_terminal() {
    tesseract_ocr="$(tesseract --version 2>/dev/null)"
    tesseract_lang="$(tesseract --list-langs 2>/dev/null)"
    regex_ver='[Tt]esseract 4'  # for zsh quoted regex compatibility
    if [[ "${tesseract_ocr}" =~ ${regex_ver} && "${tesseract_lang}" =~ eng ]]; then
        echo -e "\n${low_contrast_color}Attempting automated recognition of virtual machine graphical user interface.${default_color}"
        animated_please_wait 30
        for i in $(seq 1 60); do  # try automatic ocr for about 5 minutes
            VBoxManage controlvm "${vm_name}" screenshotpng "${vm_name}_screenshot.png" 2>&1 1>/dev/null
            ocr="$(tesseract "${vm_name}_screenshot.png" - --psm 11 --dpi 72 -l eng 2>/dev/null)"
            regex_lang='Language|English|Fran.ais'  # for zsh quoted regex compatibility
            regex_term='Terminal.Shell|Terminal.*sh.?-'  # for zsh quoted regex compatibility
            if [[ "${ocr}" =~ ${regex_lang} ]]; then
                animated_please_wait 20
                send_enter
                animated_please_wait 20
            elif [[ "${ocr}" =~ Utilities ]]; then
                animated_please_wait 20
                kbspecial='CTRLprs F2 CTRLrls u ENTER t ENTER'  # start Terminal
                send_special
                animated_please_wait 20
            elif [[ "${ocr}" =~ ${regex_term} ]]; then
                sleep 2
                return
            fi
            animated_please_wait 10
        done
        echo -e "\nFailed automated recognition of virtual machine graphical user interface.\nPlease press enter as directed."
    fi
    echo -ne "\n${highlight_color}Press enter when the Language window is ready.${default_color}"
    clear_input_buffer_then_read
    send_enter
    echo -ne "\n${highlight_color}Press enter when the macOS Utilities window is ready.${default_color}"
    clear_input_buffer_then_read
    kbspecial='CTRLprs F2 CTRLrls u ENTER t ENTER'  # start Terminal
    send_special
    echo -ne "\n${highlight_color}Press enter when the Terminal command prompt is ready.${default_color}"
    clear_input_buffer_then_read
}

function animated_please_wait() {
    # "Please wait" prompt with animated dots.
    # Accepts one optional positional parameter, an integer
    # The parameter specifies how many half-seconds to wait
    echo -ne "\r                 \r${low_contrast_color}Please wait${default_color}"
    specified_halfseconds=5
    [[ "${1}" =~ [^0-9] || -z "${1}" ]] || specified_halfseconds=${1}
    for halfsecond in $(seq 1 ${specified_halfseconds}); do
        echo -ne "${low_contrast_color}.${default_color}"
        sleep 0.5
        if [[ $(( halfsecond % 5 )) -eq 0 ]]; then
            echo -ne "\r                 \r${low_contrast_color}Please wait${default_color}"
        fi
    done
}

function add_another_terminal() {
    # at least one terminal has to be open before calling this function
    kbspecial='CMDprs n CMDrls'
    send_special
    sleep 1
}

function cycle_through_terminal_windows() {
    kbspecial='CMDprs ` CMDrls'
    send_special
    sleep 1
}

function would_you_like_to_know_less() {
    if [[ -z "$(less --version 2>/dev/null)" ]]; then
        echo -e "  ${highlight_color}${0} documentation${default_color}"
    else
        echo -e "  ${highlight_color}${0} documentation | less -R${default_color}"
    fi
}

function prompt_delete_y_n() {
    # workaround for zsh-bash differences in read
    delete=""
    if [[ $- =~ i ]]; then  # terminal is interactive
        if [[ -n "${ZSH_VERSION}" ]]; then
            read -s -q delete\?' [y/N] '
            delete="${delete:l}"
        elif [[ -n "${BASH_VERSION}" ]]; then
            read -n 1 -p ' [y/N] ' delete
            delete="${delete,,}"
        fi
    fi
    echo ""
}

# command-line argument processing
check_shell
stages=(
    check_gnu_coreutils_prefix
    set_variables
    welcome
    check_dependencies
    prompt_delete_existing_vm
    create_vm
    check_default_virtual_machine
    prepare_macos_installation_files
    create_nvram_files
    create_macos_installation_files_viso
    configure_vm
    populate_basesystem_virtual_disk
    create_bootable_installer_virtual_disk
    populate_bootable_installer_virtual_disk
    create_target_virtual_disk
    populate_macos_target_disk
    prompt_delete_temporary_files
)

other_commands=(
    check_shell
    troubleshoot
    documentation
    and_all_subsequent_stages
)

# script called without arguments
[[ $# -eq 0 ]] && for stage in "${stages[@]}"; do ${stage}; done && exit

# first argument is "documentation"
[[ "${1}" == "documentation" ]] && documentation && exit

specified_arguments=("$@")  # this variable is used in the function "and_all_subsequent_stages"
sorted_unique_recognized_arguments="$( printf "%s\n" ${stages[@]} ${other_commands[@]} | sort -bu )"
sorted_unique_recognized_and_specified_arguments="$( printf "%s\n" ${stages[@]} ${other_commands[@]} $@ | sort -bu )"
# if a specified argument is different from any recognized argument
if [[ "${sorted_unique_recognized_and_specified_arguments}" != "${sorted_unique_recognized_arguments}" ]]; then
    echo -e "\nOne or more specified arguments is not recognized."
    echo -e "\nRecognized stages:\n"
    printf '    %s\n' "${stages[@]}"
    echo -e "\nOther recognized arguments:\n"
    printf '    %s\n' "${other_commands[@]}"
    echo -e "\nView documentation by entering the following command:"
    would_you_like_to_know_less
    exit
fi
check_gnu_coreutils_prefix
set_variables
check_dependencies
for argument; do ${argument}; done