| layout | title | navbar |
|---|---|---|
default |
SoC 2019 Applicant Microprojects |
false |
It is strongly recommended that students who want to apply to the Git project for the Summer of Code 2019 submit a small code-related patch to the Git project as part of their application. Think of these microprojects as the "Hello, world" of getting involved with the Git project; the coding aspect of the change can be almost trivial, but to make the change the student has to become familiar with many of the practical aspects of working on the Git project.
Git development is based on sending successive versions of patches or patch series to the mailing list until they are considered good and correct by the reviewers and Junio Hamano, the maintainer, who will merge them. This process usually takes quite some time. By sending drafts of your microproject patches to the mailing list long before the deadline, you can show us that you are willing and able to work well using the Git development process.
It is expected that what you send will need several rounds of reviews and discussions. If you are not sure at all about a patch you can put "[GSoC][RFC/PATCH]" at the beginning of its subject.
Consider a sample email thread, which shows how a developer proposed a change and a patch to implement it. The problem being solved, the design of the proposed solution, and the implementation of that design were all reviewed and discussed, and after several iterations an improved version of the patch was accepted into our codebase. As a GSoC student, you will be playing the role of the developer and engaging in a similar discussion. Get familar with the flow, need for clarity on both sides (i.e. you need to clearly defend your design, and need to ask clarifications when questions/suggestions you are offered are not clear enough), the pace at which the discussion takes place, and the general tone of the discussion, to learn what is expected of you.
To complete a microproject, you will have to go through approximately the following steps:
-
Download the source code: clone the repository using the Git via Git instructions and read the
READMEfile. -
Build the source code: this is described in the file
INSTALL. -
Glance over our coding guidelines in the file
Documentation/CodingGuidelines. We take things like proper code formatting very seriously. -
Read about the process for submitting patches to Git: this is described in
Documentation/SubmittingPatches. -
Select a microproject and check that it has not yet been taken or discussed by searching the mailing list. Public Inbox is your friend.
-
Send an email to the mailing list where you describe the microproject you want to work on, the way you want to do it, and maybe talk a bit about yourself. Make sure the email you send has a subject that starts with "[GSoC]".
-
Make the actual change. (Funny, this is the only part they teach you about in college.)
-
Run the test suite and make sure it passes 100%: this is described in the file
t/README. (If you have added new functionality, you should also add new tests, but most microprojects will not add new functionality.) -
Commit your change. Surprise: we use Git for that, so you will need to gain at least a basic familiarity with using Git. Make sure to write a good commit message that explains the reason for the change and any ramifications. Remember to make sure that you agree with our "Developer's Certificate of Origin" (whose text is contained in
Documentation/SubmittingPatches), and to signify your agreement by adding aSigned-off-byline. -
Optional, but recommended: Create a fork of Git on github.com, sign in to Travis CI with your GitHub account, accepting the GitHub access permissions confirmation, and enable builds of your Git fork in your Travis CI profile (you only have to do these steps once). Afterwards you can push your changes to your fork and on https://travis-ci.org/your-github-name/git/builds (example here) you can see if your changes pass the Git test suite on Ubuntu Linux and on Mac OS X.
-
Submit your change to the Git mailing list. For this step you probably want to use the commands
git format-patchandgit send-email. Make sure that your email is formatted correctly: send a test version of the email to yourself and see if you can apply it to your repository usinggit am. Alternatively you may use GitGitGadget or submitGit.When you submit your patch, please mention that you plan to apply for the GSoC. You can use "[GSoC][PATCH ...]" in the subject of the emails you send for that purpose. This will ensure that we take special care not to overlook your application among the large pile of others.
-
Expect feedback, criticism, suggestions, etc. from the mailing list.
Respond to it! and follow up with improved versions of your change. Even for a trivial patch you shouldn't be surprised if it takes two or more iterations before your patch is accepted. This is the best part of participating in the Git community; it is your chance to get personalized instruction from very experienced peers!
The coding part of the microproject should be very small (say, 10-30 minutes). We don't require that your patch be accepted into master by the time of your formal application; we mostly want to see that you have a basic level of competence and especially the ability to interact with the other Git developers.
Students, please attempt only ONE microproject. We want quality, not quantity! (Also, it takes work to collect the ideas, and it would be nice to have enough microprojects for everybody.)
This means that for a microproject that consist in refactoring or rewriting a small amount of code, your patch should change only ONE file, or perhaps 2 files if they are closely related, like "foo.c" and "foo.h".
If you change a test file, the title of your patch should start with "tXXXX: " where tXXXX is the start of the filename of the test script you change. If you change "foo.c" or "foo.h", the title of your patch should probably start with "foo: ".
In general it's a good idea to check on the mailing list archive what other GSoC students attempting a microproject have already been told this year or any previous year, as hopefully it will help you avoid some mistakes. As some microproject ideas haven't changed for years, some microprojects might have been attempted many times already and you can learn a lot from these attempts.
The more you research your microproject and take advantage of that, the more confident we can be that you will be able to solve many problems when working on your real GSoC project. So it's a very good thing to show that you have researched your microproject and taken into account what you have found.
If you've already done a microproject and are itching to do more, then get involved in other ways, like finding and fixing other problems in the code, or improving the documentation or code comments, or helping to review other people's patches on the mailing list, or answering questions on the mailing list or in IRC, or writing new tests, etc., etc. In short, start doing things that other Git developers do! Alternatively you can of course focus on your project proposal.
The following are just ideas. Any small code-related change would be suitable. Just remember to keep the change small! It is much better for you to finish a small but complete change than to try something too ambitious and not get it done.
"git diff" shows the function name corresponding to each hunk after the @@ ... @@ line. For common languages (C, HTML, Ada, Matlab, ...), the way to find the function name is built-in Git's source code as regular expressions (see userdiff.c). A few languages are common enough to deserve a built-in driver, but are not yet recognized. For example, shell.
This project requires a very good knowledge of regular expressions.
It is easy though to find examples of how this can be done by searching the code base and the mailing list archive, as this has already been done for a number of languages.
Find one test script that verifies the presence/absence of
files/directories with 'test -(e|f|d|...)' and replace them with the
appropriate test_path_is_file, test_path_is_dir, etc. helper
functions.
See the commit c6f44e1da5 for example, and then do the same thing in one other test script.
Pick one field of a structure that (1) is of signed integral type and (2) is used as a collection of multiple bits. Discuss if there is a good reason why it has to be a signed integral field and change it to an unsigned type otherwise. [thread]
Even though the amount of code to write is small, these projects involve a lot of prior work to understand the specification and deal with all potential corner-cases.
Many have already been added (e.g. "git am -3" in e97a5e7).
Some people always run the command with these options, and would prefer to be able to activate them by default in ~/.gitconfig.
Some places in git use raw API opendir/readdir/closedir to traverse a
directory recursively, which usually involves function recursion. Now
that we have struct dir_iterator (see dir-iterator.h), convert these
to use the dir-iterator to simplify the code. Do only one conversion
per microproject.
If you don't like for some reason the above microprojects or if you just want more choice, you may find other ideas for microprojects by searching the mailing list (https://public-inbox.org/git/) or the code base itself. In the code base you could search the code itself or the tests (in the "t" directory).
When you find something you are interested to work on, please ask first on the mailing list if it's worth doing and if it's appropriate for a microproject before starting to work on what you find. Even if it looks straightforward, there could be hidden reasons why it is too difficult or just inappropriate.
People have recently started to add "#leftoverbits" to their emails when they think further small work on the topic could be useful.
You can easily search that using:
https://public-inbox.org/git/?q=leftoverbits
But don't forget to search to check if what you find has already been addressed. If it has not been addressed, please ask first on the mailing list if it's a good idea to work on that.
Your best bet is probably to search for strings like "FIXME", "TODO", "NEEDSWORK", or maybe "NEED-WORK", and "BUG" (though not the "BUG()" macro).
You can also search for common patterns in the code and try to find or create a function to refactor them.
Tests are in the "t" directory and can be run by launching "make" in this directory. Doing that you will see that there are a number of tests that are marked with "# TODO known breakage", like for example:
"not ok 28 - git checkout -f: replace submodule with a directory must fail # TODO known breakage
These tests start with "test_expect_failure" instead of "test_expect_success". They document that something is not working as it should perhaps be working. And it might be an interesting microproject to fix that.
Note that it is especially wise to first search the mailing list and then ask on the list before working on one of these "test_expect_failure", because if we bothered to document a failure but not fix it, that is often because the fix is non-trivial.
You could also check if some commands have no test for some of their options and it could be an interesting microproject to add a test for one of those options.
You can search the mailing list for words like "low hanging fruit", or "low-hanging fruits", "hint, hint", "later", "we should", "I plan to"...