decode-acwarp.sh

#!/bin/bash
export LANG=en_US.UTF-8
case "$(uname -m)" in
x86_64 | x64 | amd64)
	cpu=amd64
	;;
i386 | i686)
	cpu=386
	;;
armv8 | armv8l | arm64 | aarch64)
	cpu=arm64
	;;
armv7l)
	cpu=arm
	;;
*)
	echo "当前架构为$(uname -m)，暂不支持"
	exit
	;;
esac

rmrf() {
	rm -rf wgcf-account.toml wgcf-profile.conf warpgo.conf sbwarp.json warp-go warp.conf wgcf warp-api-wg.txt warpapi
}

note() {
	echo "相关说明："
	echo -e "一、查看warp账户状态请以此网站为准：https://www.cloudflare.com/cdn-cgi/trace"
	echo -e "warp=on表示普通免费账户、warp=plus表示warp+或者teams团队账户、warp=off表示非warp网络\n"
	echo -e "二、此配置与当前注册平台无任何关联，根据实际使用平台的本地网络就近原则来判定warp的IP地区\n"
	echo -e "三、此配置中相关参数可应用于Wireguard客户端、Xray协议的Wireguard-warp出站配置等各类平台\n"
	echo -e "四、此配置中Endpoint的IP端口可替换为实际使用平台的本地网络测试warp优选后的IP端口\n"
	echo -e "五、此配置中PrivateKey、Address的V6地址、reserved(可选)，三个参数相互绑定关联\n"
	#echo "当前Sing-box出站配置文件如下" && sleep 1
	#echo "$(cat /usr/local/bin/sbwarp.json | python3 -mjson.tool)"
}

acwarpapi() {
	echo "下载warp api注册程序"
	curl -L -o warpapi -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/point/cpu1/$cpu
	chmod +x warpapi
	output=$(./warpapi)
	if ./warpapi 2>&1 | grep -q "connection refused"; then
		echo "申请warp api普通账户失败，请尝试使用warp-go方式进行注册" && exit
	fi
	private_key=$(echo "$output" | awk -F ': ' '/private_key/{print $2}')
	v6=$(echo "$output" | awk -F ': ' '/v6/{print $2}')
	res=$(echo "$output" | awk -F ': ' '/reserved/{print $2}' | tr -d '[:space:]')
	cat >warp-api-wg.txt <<EOF
[Interface]
PrivateKey = $private_key
Address = 172.16.0.2/32, $v6/128
DNS = 1.1.1.1
MTU = 1280
[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = 162.159.193.10:2408
EOF
	clear
	echo
	echo "warp账户申请成功" && sleep 3
	echo
	echo "reserved值：$res" && sleep 2
	echo
	echo "warp-wireguard（api）配置信息如下" && sleep 2
	cat warp-api-wg.txt
	echo
	sleep 2
	qrencode -t ansiutf8 <warp-api-wg.txt 2>/dev/null
	echo
	note
	rmrf
}

wgcfreg() {
	echo "下载warp-wgcf注册程序"
	curl -L -o wgcf -# --retry 2 https://gitlab.com/rwkgyg/cfwarp/-/raw/main/wgcf_2.2.20_$cpu
	chmod +x wgcf
	echo | ./wgcf register 2>/dev/null
	if echo | ./wgcf register 2>&1 | grep -q "connection refused"; then
		echo "申请warp-wgcf普通账户失败，请尝试使用warp-go方式进行注册" && exit
	fi
	until [[ -e wgcf-account.toml ]]; do
		echo "申请warp-wgcf普通账，请等待" && sleep 1
		echo | ./wgcf register
	done
	echo | ./wgcf generate
	sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" wgcf-profile.conf
}

wgcfup() {
	if [[ ! -e wgcf-account.toml ]]; then
		wgcfreg
	fi
	read -p "复制许可秘钥(26个字符):" ID
	if [[ -z $ID ]]; then
		echo "未输入内容" && exit
	fi
	sed -i "s/license_key.*/license_key = \"$ID\"/g" wgcf-account.toml
	echo | ./wgcf update
	echo "如显示400 Bad Request,自动还原为WARP普通账户"
	echo | ./wgcf generate
	sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" wgcf-profile.conf
}

wgcfteams() {
	wgcfreg
	echo "Teams团队Token获取地址：https://web--public--warp-team-api--coia-mfs4.code.run/"
	read -p " 请输入团队账户Token： " TEAM_TOKEN
	WG_API=$(curl -sSL https://api.zeroteam.top/warp?format=warp-go)
	PRIVATEKEY=$(expr "$WG_API" | awk 'NR==3 {print $3}')
	PUBLICKEY=$(expr "$WG_API" | awk 'NR==10 {print $3}')
	INSTALL_ID=$(tr -dc 'A-Za-z0-9' </dev/urandom | head -c 22)
	FCM_TOKEN="${INSTALL_ID}:APA91b$(tr -dc 'A-Za-z0-9' </dev/urandom | head -c 134)"
	ERROR_TIMES=0
	while [ "$ERROR_TIMES" -le 3 ]; do
		((ERROR_TIMES++))
		if [[ "$TEAMS" =~ 'token is expired' ]]; then
			read -p " 请刷新token重新复制 " TEAM_TOKEN
		elif [[ "$TEAMS" =~ 'error' ]]; then
			read -p " 请刷新token重新复制 " TEAM_TOKEN
		elif [[ "$TEAMS" =~ 'organization' ]]; then
			break
		fi
		TEAMS=$(curl --silent --location --tlsv1.3 --request POST 'https://api.cloudflareclient.com/v0a2158/reg' \
			--header 'User-Agent: okhttp/3.12.1' \
			--header 'CF-Client-Version: a-6.10-2158' \
			--header 'Content-Type: application/json' \
			--header "Cf-Access-Jwt-Assertion: ${TEAM_TOKEN}" \
			--data '{"key":"'${PUBLICKEY}'","install_id":"'${INSTALL_ID}'","fcm_token":"'${FCM_TOKEN}'","tos":"'$(date +"%Y-%m-%dT%H:%M:%S.%3NZ")'","model":"Linux","serial_number":"'${INSTALL_ID}'","locale":"zh_CN"}')
		ADDRESS6=$(expr "$TEAMS" : '.*"v6":[ ]*"\([^"]*\).*')
	done
	sed -i "s#PrivateKey.*#PrivateKey = $PRIVATEKEY#g;s#Address.*128#Address = $ADDRESS6/128#g" wgcf-profile.conf
}

wgcfshow() {
	clear
	echo
	echo "warp账户申请成功" && sleep 2
	echo
	echo "warp-wireguard(wgcf)配置信息如下" && sleep 2
	cat wgcf-profile.conf
	echo
	sleep 2
	qrencode -t ansiutf8 <wgcf-profile.conf 2>/dev/null
	echo
	note
	rmrf
}

warpgoac() {
	echo "下载warp-go注册程序"
	curl -L -o warp-go -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/warp-go_1.0.8_linux_${cpu}
	chmod +x warp-go
	curl -L -o warp.conf --retry 2 https://api.zeroteam.top/warp?format=warp-go
	if [[ ! -s warp.conf ]]; then
		curl -L -o warpapi -# --retry 2 https://gitlab.com/rwkgyg/CFwarp/-/raw/main/point/cpu1/$cpu
		chmod +x warpapi
		output=$(./warpapi)
		private_key=$(echo "$output" | awk -F ': ' '/private_key/{print $2}')
		device_id=$(echo "$output" | awk -F ': ' '/device_id/{print $2}')
		warp_token=$(echo "$output" | awk -F ': ' '/token/{print $2}')
		rm -rf warpapi
		cat >warp.conf <<EOF
[Account]
Device = $device_id
PrivateKey = $private_key
Token = $warp_token
Type = free
Name = WARP
MTU  = 1280

[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
Endpoint = 162.159.193.10:1701
# AllowedIPs = 0.0.0.0/0
# AllowedIPs = ::/0
KeepAlive = 30
EOF
	fi
}

warpgoplus() {
	warpgoac
	echo "请复制手机WARP客户端WARP+状态下的按键许可证秘钥 或 网络分享的秘钥（26个字符）"
	read -p "请输入升级WARP+密钥：" ID
	if [[ -z $ID ]]; then
		echo "未输入内容" && exit
	fi
	if ./warp-go --update --config=warp.conf --license=$ID --device-name=warp+$(date +%s%N | md5sum | cut -c 1-3) 2>&1 | grep -q "connection refused"; then
		echo "网络连接繁忙，升级失败"
	else
		./warp-go --update --config=warp.conf --license=$ID --device-name=warp+$(date +%s%N | md5sum | cut -c 1-3)
	fi
}

warpgoteams() {
	warpgoac
	echo "Teams团队Token获取地址：https://web--public--warp-team-api--coia-mfs4.code.run/"
	read -p "请输入团队账户Token：" ID
	if ./warp-go --register --config=warp.conf --team-config=$ID --device-name=warp+teams+$(date +%s%N | md5sum | cut -c 1-3) 2>&1 | grep -q "connection refused"; then
		echo "网络连接繁忙，升级失败"
	else
		./warp-go --register --config=warp.conf --team-config=$ID --device-name=warp+teams+$(date +%s%N | md5sum | cut -c 1-3)
	fi
}

warpgoconfig() {
	if ./warp-go --config=warp.conf --export-wireguard=warpgo.conf 2>&1 | grep -q "connection refused"; then
		echo "网络连接繁忙，仅生成WARP-IPV4配置" && sleep 1
		output=$(cat warp.conf)
		private_key=$(sed -n 's/PrivateKey = \(.*\)/\1/p' warp.conf)
		cat >warpgo.conf <<EOF
[Interface]
PrivateKey = $private_key
Address = 172.16.0.2/32
DNS = 1.1.1.1
MTU = 1280
[Peer]
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
AllowedIPs = 0.0.0.0/0
Endpoint = 162.159.193.10:2408
EOF
	else
		./warp-go --config=warp.conf --export-wireguard=warpgo.conf
		./warp-go --config=warp.conf --export-singbox=sbwarp.json
	fi
	sed -i "s/engage.cloudflareclient.com:2408/162.159.193.10:2408/g" warpgo.conf
}

warpgoshow() {
	clear
	echo
	echo "warp账户申请成功" && sleep 3
	echo
	reserved=$(grep -o '"reserved":\[[^]]*\]' sbwarp.json 2>/dev/null)
	if [[ -n $reserved ]]; then
		echo "reserved值：$reserved" && sleep 2
	fi
	echo
	echo "warp-wireguard（warp-go）配置信息如下" && sleep 2
	cat warpgo.conf
	echo
	sleep 2
	qrencode -t ansiutf8 <warpgo.conf 2>/dev/null
	echo
	note
	rmrf
}

acwgcf() {
	echo
	echo "1.warp-wgcf普通账户"
	echo "2.warp-wgcf+账户"
	#echo "3.warp-wgcf+teams团队账户"
	echo "0.退出"
	read -p "请选择: " menu
	if [ "$menu" == "1" ]; then
		wgcfreg && wgcfshow
	elif [ "$menu" == "2" ]; then
		wgcfup && wgcfshow
	#elif [ "$menu" == "3" ];then
	#wgcfteams && wgcfshow
	else
		exit
	fi
}

acwarpgo() {
	echo
	echo "1.warp-go普通账户"
	echo "2.warp-go+账户"
	echo "3.warp-go+teams团队账户"
	echo "0.退出"
	read -p "请选择: " menu
	if [ "$menu" == "1" ]; then
		warpgoac && warpgoconfig && warpgoshow
	elif [ "$menu" == "2" ]; then
		warpgoplus && warpgoconfig && warpgoshow
	elif [ "$menu" == "3" ]; then
		warpgoteams && warpgoconfig && warpgoshow
	else
		exit
	fi
}

echo "------------------------------------------------------"
echo "甬哥Github项目  ：github.com/yonggekkk"
echo "甬哥Blogger博客 ：ygkkk.blogspot.com"
echo "甬哥YouTube频道 ：www.youtube.com/@ygkkk"
echo "注册生成WARP-Wireguard配置文件、二维码  V2023.12.20"
echo "------------------------------------------------------"
echo
echo "1.选择 warp-go  注册warp配置 (支持所有账户升级，显示reserved值，推荐) "
echo "2.选择 wgcf     注册warp配置 (支持普通账户、+账户)    "
echo "3.选择 warp api 注册warp配置 (支持普通账户，显示reserved值)"
echo "0.退出"
read -p "请选择: " menu
if [ "$menu" == "1" ]; then
	acwarpgo
elif [ "$menu" == "3" ]; then
	acwarpapi
elif [ "$menu" == "2" ]; then
	acwgcf
else
	exit
fi