Skip to content

Home

Jump to bottom Edit New page
Eric Helgeson edited this page Dec 8, 2020 · 34 revisions

Setup Arduino IDE

  1. Install Arduino IDE version 1.8.x - https://www.arduino.cc/en/software
    1. Instructions may require extra steps to allow for serial/usb access depending on your OS. Read all instructions carefully.
  2. Follow these instructions carefully as well - https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/Installation
    1. Note I used the Arduino SAM Boards (32-bits ARM) Cortext-M3) version 1.6.12
    2. Additional Help https://sites.google.com/site/ericmklaus/projects-1/stm32f103-minimum-system-development-board/arduino-ide-for-stm32103-board
    3. Some additional hints here - https://github.com/ztto/ArdSCSino-stm32/issues/5
  3. Install SdFat - Tools -> Manage Libraries -> SdFat by Bill Greiman version 1.1.4
  4. Make sure the correct board is selected Generic STM32F103C series - Copy the latest .ino file into a sketch and compile.
  5. Flash using your preferred method.

Flashing

Soon.

Making Gerber files

https://support.jlcpcb.com/article/44-how-to-export-kicad-pcb-to-gerber-files

Parts

Version 1.0-b

STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.

Mouser Cart https://www.mouser.com/ProjectManager/ProjectDetail.aspx?State=EDIT&ProjectGUID=db967d46-a51a-4a0e-a350-8f503b2f02cf

Not available on Mouser:

50 PIN SCSI header https://lcsc.com/product-detail/IDC-Connectors_BOOMELE-Boom-Precision-Elec-C30006_C30006.html

  • May substitute with 2 rows of headers from above.

Optional

Floppy/Berg Power header https://www.mouser.com/ProductDetail/571-1718254

  • Required if your machine does not supply power via TERM POWER. For example a Mac Plus or Mac with a Analog/PSU board that has not been recapped.

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki

BlueSCSI Logo

Clone this wiki locally