-
|
Hello all! I recently bought two BlueSCSI devices from one of the endorsed vendors; one for my Rev.1 Power Mac G3 B&W, and the other for my Performa/LC 500. I excitedly just tried to install one of the devices into my Power Mac G3, only to find out that it uses 68-pin SCSI connectors internally. Which kind of adapter do I need to convert the 50-pin plug on the BlueSCSI board to the 68-pin SCSI connector used on the Power Mac? I'm looking at this adapter, but I can't tell by visual alone if it is the same connector as the BlueSCSI, which would make it incompatible; I then found this adapter which looks like it would work, but I'm still not sure what to get. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Never mind all! I bought the second adapter after checking that every connection would match up with the connectors I have. |
Beta Was this translation helpful? Give feedback.
Never mind all! I bought the second adapter after checking that every connection would match up with the connectors I have.