lyne.vim

a fast, customizable statusline for vim power-users

defaults

There are defaults so that lyne.vim will work out of the box. However, you are expected to customize lyne.vim to fit your needs. This plugin can be as simple and as fast as the built-in statusline, or it can be as complex and stylish as you wish. lyne.vim supports complex configurations but with minimal configuration can be styled dramatically and can easily be powerlined.

While powerline symbols are not set by default, since this will not render in terminals that don't use a patched powerline font, lyne.vim defaults to supporting powerline symbols. Supporting powerline separators and also the default styling for buffers and buffer flags requires a small amount of overhead. Since this may not be suitable to every power-user, these functions are stored into pre- and post-function lists, either of which can be disabled or set to a new list. This is covered in further detail below in configuration.

configuration

active and inactive lyne

In order to change the components of the statusline, you can change g:lyne_active and g:lyne_inactive. g:lyne_active represents how the active lyne will look (the active lyne is the statusline in the current window), while g:lyne_inactive represents how the inactive lyne will look (the other lynes in all of the inactive windows).

Each is a dict that can contain 'left' and 'right' keys that map to a list of tokens that describe the statusline.

Each token (described in further detail in lyne tokens) is comprised of three parts:

type: a single character that denotes the token type
- h: new highlight segment
- r: recurring function call
- f: function (called once)
- e: raw expression
flag: a single character that denotes token padding
- :: pad both sides with a non-breaking space
- <: flush left (pad right-side)
- >: flush right (pad left-side)
- |: no padding on either side
data: treated specially for each token type
- h: highlight group name
- r: recurring function name as a string
- f: function name as a string
- e: raw expression as a string

It is more easily shown with an example. The defaults are as follows:

let g:lyne_active = {
\	'left': [
\		'h|LyneMode', 'r:lyne#get_mode',
\		'h|LyneBufname', 'r>lyne#utils#get_bufname', 'e|%<', 'r<lyne#utils#get_bufflags',
\		'h|StatusLine', 'e>%{&filetype}'
\	],
\	'right': ['e<[%l/%L] %p%%', 'h|LyneBufname', 'e:%02v']
\}

let g:lyne_inactive = {
\	'left': ['e:%f%<%h%w%m%r'],
\	'right': ['e:%p%%']
\}

Note that if you simply do let g:lyne_active = {'left':'e:%f'}, for example, then this does not overwrite g:lyne_active.right, nor of course, does it set either g:lyne_inactive.left or g:lyne_inactive.right.

lyne tokens

As was briefly mentioned, each token is comprised of three parts: a type, a flag, and data.

Since the flag is the easiest to understand, let's start with that. The flag is always the second character in the token, and it determines what kind of padding the token will use. : pads the token with space on both sides, < pads space only on the right, > pads space only on the left, and | adds no space.

I have opted to use | for all of the highlight groups in the default settings, so you might have noted h|LyneMode, h|LyneBufname, etc in the defaults. This is because I have added space around the other components, and so that there are not too many spaces, I use | around the highlight tokens.

The token token type is determined by the first character, and can only be one of h (highlight token), r (recurring function token), f (one-time function), or e (raw expression token). The are intricacies highlighted below by showing example tokens.

'h|LyneMyName'
- if this is the first highlight group for the left or right lyne, then simply start a new highlight group called LyneMyName
- if there is already another highlight group, then add a separator from g:lyne_separators.{left,right} (depending on the side) and then start the new highlight group
- |: there will be no padding on either side of this token
'h|LyneMyName::'
- this is the same as the first example except : is used as the separator instead of g:lyne_separator.{left,right}
- the second : can be replaced with any string
'r>lyne#utils#get_bufname
- show the buffer name using a lyne utility function
- >: pad the token with a space on the left
'r:fugitive#statusline'
- show the git branch with fugitive#statusline() (must install tpope's fugitive plugin)
- if the function is not found, then the errors are ignored with silent!
- :: pad both sides of the token with space
'e:%f%<%m%r'
- adds an expression which is interpreted by the statusline only and is not evaluated by lyne
- therefore, the statusline expands %f to the buffer name, %< is the truncation indicator, %m indicates if the buffer has been modified or is modifiable, and %r indicates if the buffer is read-only
- :: pad both sides of the token with space

settings

Besides g:lyne_active and g:lyne_inactive there are a few other settings that allow you to change the behavior of lyne or customize it further.

g:lyne_separators

A dict that changes the default separators between highlight segments. The dict should contain only 'left' and 'right' keys that map to strings. This is the default:

let g:lyne_separators = {'left':'', 'right':''}

g:pre_functions and g:post_functions

g:pre_functions and g:post_functions are two list that are respectively run before and after statusline evaluation each time the statusline is being updated by vim. This is achieved by adding %{lyne#pre()} and %{lyne#pos()} to the beginning and end of the statusline. If at compile timelen(g:pre_functions) ==# 0 then %{lyne#pre} is not added to the statusline, and if %{len(g:post_function} ==# then %{lyne#post} is not added. Here are the defaults:

let g:lyne_pre_functions = []
let g:lyne_post_functions = ['lyne#utils#update_bufname', 'lyne#utils#update_mode', 'lyne#utils#update_separators']

Each function is passed c and winnr as the two parameters. c is 1 if the lyne is an active lyne or 0 if it is an inactive lyne. winnr is the window number of the lyne.

The default pre- and post-functions are used to style the statusline and support powerline out of the box. Their purposes are discussed further in lyne utils, but they are briefly mentioned here.

lyne#utils#update_bufname: color the output of lyne#utils#get_bufname
lyne#utils#utils#update_mode: color the output of lyne#utils#get_mode
lyne#utils#update_separators: update the separators between each highlight segment
- this is necessary if the separators change color (for example with powerline separators)

g:pre_compile_functions and g:post_compile_functions

These two are lists of functions (stored as strings—note that <sid> will not work in the list even if wrapped in a function()) that are called before and after (resp) the lynes are compiled.

Each function that is called is passed the two args c and -1. c is 1 if the lyne will be an active lyne or 0 if it will be an inactive lyne.

g:lyne_mode_hl

This links each potential mode(1) output to a highlight group name. Each name will be prefixed with 'LyneMode'. Here are the defaults:

let g:lyne_mode_hl = {
\	'n'        : 'Normal',
\	'no'       : 'Normal',
\	'nov'      : 'Normal',
\	'noV'      : 'Normal',
\	"no\<c-v>" : 'Normal',
\	'niI'      : 'Insert',
\	'niR'      : 'Replace',
\	'niV'      : 'Visual',
\	'v'        : 'Visual',
\	'V'        : 'Visual',
\	"\<c-v>"   : 'Visual',
\	's'        : 'Visual',
\	'S'        : 'Visual',
\	"\<c-s>"   : 'Visual',
\	'i'        : 'Insert',
\	'ic'       : 'Insert',
\	'ix'       : 'Insert',
\	'R'        : 'Replace',
\	'Rc'       : 'Replace',
\	'Rv'       : 'Replace',
\	'Rx'       : 'Replace',
\	'c'        : 'Command',
\	'cv'       : 'Term',
\	'ce'       : 'Term',
\	'r'        : 'Prompt',
\	'rm'       : 'Prompt',
\	'r?'       : 'Prompt',
\	'!'        : 'Term',
\	't'        : 'Term'
\}

For example in normal mode, mode(1) returns 'n', which is then mapped to the 'LyneModeNormal' highlight group.

Note that if you only have a subset of the above keys, then the defaults are extended and not overwritten. This makes it possible to change just one or a few mode highlights.

g:lyne_mode_map

In addition to a mode highlight map, there is also a mode map settings, g:lyne_mode_map which maps each mode(1) to a string. Here are the defaults:

let s:mode_map = {
\	'n'        : 'N',
\	'no'       : 'N·OP',
\	'nov'      : 'N·OP·v',
\	'noV'      : 'N·OP·V',
\	"no\<c-v>" : 'N·OP·^V',
\	'niI'      : 'I·^O',
\	'niR'      : 'R·^O',
\	'niV'      : 'V',
\	'v'        : 'v',
\	'V'        : 'V',
\	"\<c-v>"   : '^V',
\	's'        : 's',
\	'S'        : 'S',
\	"\<c-s>"   : '^S',
\	'i'        : 'I',
\	'ic'       : 'I·Comp',
\	'ix'       : 'I·^X',
\	'R'        : 'R',
\	'Rc'       : 'R·Comp',
\	'Rv'       : 'R·Virt',
\	'Rx'       : 'R·^X',
\	'c'        : 'C',
\	'cv'       : 'Ex·C',
\	'ce'       : 'Ex',
\	'r'        : 'Enter',
\	'rm'       : 'More',
\	'r?'       : 'Confirm',
\	'!'        : 'Shell',
\	't'        : 'Term'
\}

As with the mode highlights map, the mode map defaults will be extended instead of replaced, so you can just specify one or a few mode maps instead of all of them.

utils

lyne#utils#update_bufname (usually a post-function)
- links LyneBufname to LyneBufnameModified or LyneBufnameUnmodified depending on whether the buffer is &modified or not (resp)
lyne#utils#update_mode (usually a post-function)
- uses g:lyne_mode_hl to map the LyneMode highlight group to the correct highlight group
- for example, using the defaults, in normal mode, LyneMode will be linked to LyneModeNormal (since g:lyne_mode_hl.n ==# 'Normal')
lyne#utils#update_separators (usually a post-function)
- iterate over each separator and update the highlight group
- this is more expensive than the other util functions, but is required for powerline or if the separators' colors shoule be recomputed
lyne#utils#get_bufname (usually a r-token)
- get the buffer name; while similar to e:%f, it is slightly different and only achievable in a function
lyne#utils#get_bufflags (usually a r-token)
- get the buffer flags; while similar to e:%m%r, it is slightly different and only achievable in a function

debugging

If there is an invalid token type, then it will not be added. However, the token flags are not checked for validity.

To see the pre-compiled lyne, use either :echo lyne#get_active() or :echo lyne#get_inactive(). These two dicts are compiled to the active and inactive lynes in lyne#setup(). For example:

:echo lyne#get_active().left
['h:LyneMode', 'r:lyne#get_mode', 'h:LyneBufname', 'r>lyne#utils#get_bufname', 'e|%<', 'r<lyne#utils#get_bufflags', 'h:StatusLine', 'e:%{&filetype}']

To see the current window's compiled statusline, use :echo &statusline. To see all of the windows' statuslines, use :echo map(range(1, winnr('$')), { i,n -> 'win '.n.': '.getwinvar(n, '&statusline') }). For example:

:echo &statusline
%{lyne#pre()}%#LyneMode#%{lyne#func_wrap('lyne#get_mode',1,':')}%#LyneBufname#%{lyne#func_wrap('lyne#utils#get_bufname',1,'>')}%<%{lyne#func_wrap('lyne#utils#get_bufflags',1,'<')}%#StatusLine# %{&filetype}%=[%l/%L] %p%% %#LyneBufname# %02v %{lyne#post()}

pics

various lyne modes

various buffers

todo

Allow for restrictions somehow based on arbitrary functions (or maybe things like window width, filetype, etc ... or maybe both)
Maybe add a g-token for "group" which is like an e-token but wraps everything (including padding) in a group like %(..%)
Continue adding features for flexibility and power while simplifying if possible
- re-check airline and lightline for powerful features that can be implemented

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

lyne.vim

defaults

configuration

active and inactive lyne

lyne tokens

settings

g:lyne_separators

g:pre_functions and g:post_functions

g:pre_compile_functions and g:post_compile_functions

g:lyne_mode_hl

g:lyne_mode_map

utils

debugging

pics

various lyne modes

various buffers

todo

Files

README.md

Latest commit

History

README.md

File metadata and controls

lyne.vim

defaults

configuration

active and inactive lyne

lyne tokens

settings

g:lyne_separators

g:pre_functions and g:post_functions

g:pre_compile_functions and g:post_compile_functions

g:lyne_mode_hl

g:lyne_mode_map

utils

debugging

pics

various lyne modes

various buffers

todo