boot_hacks

#DCZia_Hackz
#Info mostly sourced from: https://himeshp.blogspot.com/2018/08/fast-boot-with-raspberry-pi.html

gpu_mem=64
disable_overscan=1

# Force on HDMI
hdmi_force_hotplug=1
hdmi_drive=2
#Force 1080p output
hdmi_group=1
hdmi_mode=16

# Disable the rainbow splash screen
disable_splash=1

# Disable bluetooth
dtoverlay=pi3-disable-bt

# Overclock the Pis SD Card reader from 50 to 84MHz - A good U1 card can do 100 but for compatibility we set 84
# This can only be done with at least a UHS Class 1 card
dtoverlay=sdtweak,overclock_50=84
 
# Set the bootloader delay to 0 seconds. The default is 1s if not specified.
boot_delay=0

# Overclock the raspberry pi. Make sure you have a good power supply.
force_turbo=1

# Binding keys 1-3 to key1 right ctrl key2 space key3 h
dtoverlay=gpio-key,gpio=21,gpio_pull=up,active_low=1,label=key1,keycode=109
dtoverlay=gpio-key,gpio=20,gpio_pull=up,active_low=1,label=key2,keycode=65
dtoverlay=gpio-key,gpio=16,gpio_pull=up,active_low=1,label=key3,keycode=35

# Binding joystick up up arrow down down arrow left left arrow right right arrow press esc
dtoverlay=gpio-key,gpio=6,gpio_pull=up,active_low=1,label=joyup,keycode=103
dtoverlay=gpio-key,gpio=19,gpio_pull=up,active_low=1,label=joydown,keycode=108
dtoverlay=gpio-key,gpio=5,gpio_pull=up,active_low=1,label=joyleft,keycode=105
dtoverlay=gpio-key,gpio=26,gpio_pull=up,active_low=1,label=joyright,keycode=106
dtoverlay=gpio-key,gpio=13,gpio_pull=up,active_low=1,label=joypress,keycode=1