Add disposable glove guidance for short adhesive tasks

[digitalfrost]

Problem

The Gloves section currently recommends three categories:

1. Cut-resistant gloves
2. Mechanics gloves
3. Reusable chemical-resistant gloves

However, it does not provide guidance for short-duration tasks where disposable gloves may be more practical—for example, applying a small amount of cyanoacrylate adhesive or mixing and applying epoxy.

Using the recommended reusable chemical gloves for every quick adhesive task may be inconvenient and potentially wasteful, particularly when contamination could make the gloves difficult to reuse. This may also leave readers unsure whether disposable nitrile gloves are appropriate, or whether another glove material should be used.

Suggested improvement

Could this section include guidance on disposable gloves for short-term chemical-handling tasks?

It would be helpful to clarify:

• Whether disposable nitrile gloves are recommended for brief work involving cyanoacrylate adhesives or epoxy.
• Whether compatibility depends on the specific adhesive, resin, hardener, or exposure duration.
• When reusable chemical-resistant gloves are preferable to disposable gloves.
• Whether users should consult the product’s safety data sheet and glove-manufacturer compatibility information before choosing a glove.
• How contaminated disposable and reusable gloves should be handled after use.

A small table covering common workshop substances, suitable glove types, expected task duration, and important limitations could make the recommendations easier to apply safely.