ACROBOTIC_SSD1306.cpp

/*
  06/01/2016
  Author: Makerbro
  Platforms: ESP8266
  Language: C++
  File: ACROBOTIC_SSD1306.cpp
  ------------------------------------------------------------------------
  Description:
  SSD1306 OLED Driver Library.
  ------------------------------------------------------------------------
  Please consider buying products from ACROBOTIC to help fund future
  Open-Source projects like this! We'll always put our best effort in every
  project, and release all our design files and code for you to use.
  https://acrobotic.com/
  ------------------------------------------------------------------------
  License:
  Released under the MIT license. Please check LICENSE.txt for more
  information.  All text above must be included in any redistribution.
*/

#include "ACROBOTIC_SSD1306.h"

void ACROBOTIC_SSD1306::init(TwoWire& wire)
{
  m_wire = &wire;
  displayOff();                 //display off
  sendCommand(0xA6);            //Set Normal Display (default)
  displayOff();                 //display off
  sendCommand(0xD5);            //SETDISPLAYCLOCKDIV
  sendCommand(0x80);            // the suggested ratio 0x80
  sendCommand(0xA8);            //SSD1306_SETMULTIPLEX
  sendCommand(SSD1306_Max_Y);
  sendCommand(0xD3);            //SETDISPLAYOFFSET
  sendCommand(0x0);             //no offset
  sendCommand(0x40|0x0);        //SETSTARTLINE
  sendCommand(0x8D);            //CHARGEPUMP
  sendCommand(0x14);
  sendCommand(0x20);            //MEMORYMODE
  sendCommand(0x00);            //0x0 act like ks0108
  sendCommand(0xA1);            //SEGREMAP   Mirror screen horizontally (A0)
  sendCommand(0xC8);            //COMSCANDEC Rotate screen vertically (C0)
  sendCommand(0xDA);            //0xDA
  sendCommand(0x12);            //COMSCANDEC
  sendCommand(0x81);            //SETCONTRAST
  sendCommand(0xCF);            //
  sendCommand(0xd9);            //SETPRECHARGE
  sendCommand(0xF1);
  sendCommand(0xDB);            //SETVCOMDETECT
  sendCommand(0x40);
  sendCommand(0xA4);            //DISPLAYALLON_RESUME
  sendCommand(0xA6);            //NORMALDISPLAY
  clearDisplay();
  sendCommand(0x2E);            //Stop scroll
  sendCommand(0x20);            //Set Memory Addressing Mode
  sendCommand(0x00);            //Set Memory Addressing Mode ab Horizontal addressing mode
  setFont(font8x8);
}

void ACROBOTIC_SSD1306::displayOn()
{
    sendCommand(0xAF);
}

void ACROBOTIC_SSD1306::displayOff()
{
    sendCommand(0xAE);
}

void ACROBOTIC_SSD1306::setFont(const uint8_t* font, bool inverse)
{
  m_font = font;
  m_inverse=inverse;
  m_font_width = pgm_read_byte(&m_font[0]);
}

void ACROBOTIC_SSD1306::sendCommand(unsigned char command)
{
  m_wire->beginTransmission(SSD1306_Address);    // begin I2C communication
  m_wire->write(SSD1306_Command_Mode);           // Set OLED Command mode
  m_wire->write(command);
  m_wire->endTransmission();                       // End I2C communication
}

void ACROBOTIC_SSD1306::setBrightness(unsigned char Brightness)
{
   sendCommand(SSD1306_Set_Brightness_Cmd);
   sendCommand(Brightness);
}

void ACROBOTIC_SSD1306::setHorizontalMode()
{
    addressingMode = HORIZONTAL_MODE;
    sendCommand(0x20);                      //set addressing mode
    sendCommand(0x00);                      //set horizontal addressing mode
}

void ACROBOTIC_SSD1306::setPageMode()
{
    addressingMode = PAGE_MODE;
    sendCommand(0x20);                      //set addressing mode
    sendCommand(0x02);                      //set page addressing mode
}

void ACROBOTIC_SSD1306::setTextXY(unsigned char row, unsigned char col)
{
    sendCommand(0xB0 + row);                          //set page address
    sendCommand(0x00 + (m_font_width*col & 0x0F));    //set column lower addr
    sendCommand(0x10 + ((m_font_width*col>>4)&0x0F)); //set column higher addr
}

void ACROBOTIC_SSD1306::clearDisplay()
{
  unsigned char i,j;
  sendCommand(SSD1306_Display_Off_Cmd);     //display off
  for(j=0;j<8;j++)
  {
    setTextXY(j,0);
    {
      for(i=0;i<16;i++)  //clear all columns
      {
        putChar(' ');
      }
    }
  }
  sendCommand(SSD1306_Display_On_Cmd);     //display on
  setTextXY(0,0);
}

void ACROBOTIC_SSD1306::sendData(unsigned char Data)
{
     m_wire->beginTransmission(SSD1306_Address); // begin I2C transmission
     m_wire->write(SSD1306_Data_Mode);            // data mode
     m_wire->write(m_inverse?~Data:Data);
     m_wire->endTransmission();                    // stop I2C transmission
}

bool ACROBOTIC_SSD1306::putChar(unsigned char ch)
{
    if (!m_font) return 0;
    //Ignore non-printable ASCII characters. This can be modified for
    //multilingual font.
    if(ch < 32 || ch > 127)
    {
        ch = ' ';
    }
    for(unsigned char i=0;i<m_font_width;i++)
    {
       // Font array starts at 0, ASCII starts at 32
       sendData(pgm_read_byte(&m_font[(ch-32)*m_font_width+m_font_offset+i]));
    }
    return 1;
}

void ACROBOTIC_SSD1306::putString(const char *string)
{
    unsigned char i=0;
    while(string[i])
    {
        putChar(string[i]);
        i++;
    }
}

void ACROBOTIC_SSD1306::putString(String string)
{
    char char_array[string.length()+1];
    string.toCharArray(char_array, sizeof(char_array));
    putString(char_array);
}

unsigned char ACROBOTIC_SSD1306::putNumber(long long_num)
{
  unsigned char char_buffer[10]="";
  unsigned char i = 0;
  unsigned char f = 0;

  if (long_num < 0)
  {
    f=1;
    putChar('-');
    long_num = -long_num;
  }
  else if (long_num == 0)
  {
    f=1;
    putChar('0');
    return f;
  }

  while (long_num > 0)
  {
    char_buffer[i++] = long_num % 10;
    long_num /= 10;
  }

  f=f+i;
  for(; i > 0; i--)
  {
    putChar('0'+ char_buffer[i - 1]);
  }
  return f;

}

unsigned char ACROBOTIC_SSD1306::putFloat(float floatNumber,unsigned char decimal)
{
  unsigned int temp=0;
  float decy=0.0;
  float rounding = 0.5;
  unsigned char f=0;
  if(floatNumber<0.0)
  {
    putString("-");
    floatNumber = -floatNumber;
    f +=1;
  }
  for (unsigned char i=0; i<decimal; ++i)
  {
    rounding /= 10.0;
  }
    floatNumber += rounding;

  temp = floatNumber;
  f += putNumber(temp);
  if(decimal>0)
  {
    putChar('.');
    f +=1;
 }
  decy = floatNumber-temp;//decimal part,
  for(unsigned char i=0;i<decimal;i++)//4
  {
    decy *=10;// for the next decimal
    temp = decy;//get the decimal
    putNumber(temp);
    decy -= temp;
  }
  f +=decimal;
  return f;
}
unsigned char ACROBOTIC_SSD1306::putFloat(float floatNumber)
{
  unsigned char decimal=2;
  unsigned int temp=0;
  float decy=0.0;
  float rounding = 0.5;
  unsigned char f=0;
  if(floatNumber<0.0)
  {
    putString("-");
    floatNumber = -floatNumber;
    f +=1;
  }
  for (unsigned char i=0; i<decimal; ++i)
  {
    rounding /= 10.0;
  }
    floatNumber += rounding;

  temp = floatNumber;
  f += putNumber(temp);
  if(decimal>0)
  {
    putChar('.');
    f +=1;
 }
  decy = floatNumber-temp;//decimal part,
  for(unsigned char i=0;i<decimal;i++)//4
  {
    decy *=10;// for the next decimal
    temp = decy;//get the decimal
    putNumber(temp);
    decy -= temp;
  }
  f +=decimal;
  return f;
}

void ACROBOTIC_SSD1306::drawBitmap(unsigned char *bitmaparray,int bytes)
{
  char localAddressMode = addressingMode;
  if(addressingMode != HORIZONTAL_MODE)
  {
      //Bitmap is drawn in horizontal mode
      setHorizontalMode();
  }

  for(int i=0;i<bytes;i++)
  {
      sendData(pgm_read_byte(&bitmaparray[i]));
  }

  if(localAddressMode == PAGE_MODE)
  {
     //If pageMode was used earlier, restore it.
     setPageMode();
  }

}

void ACROBOTIC_SSD1306::setHorizontalScrollProperties(bool direction,unsigned char startPage, unsigned char endPage, unsigned char scrollSpeed)
{
   if(Scroll_Right == direction)
   {
        //Scroll right
        sendCommand(0x26);
   }
   else
   {
        //Scroll left
        sendCommand(0x27);

   }
    sendCommand(0x00);
    sendCommand(startPage);
    sendCommand(scrollSpeed);
    sendCommand(endPage);
    sendCommand(0x00);
    sendCommand(0xFF);
}

void ACROBOTIC_SSD1306::activateScroll()
{
    sendCommand(SSD1306_Activate_Scroll_Cmd);
}

void ACROBOTIC_SSD1306::deactivateScroll()
{
    sendCommand(SSD1306_Dectivate_Scroll_Cmd);
}

void ACROBOTIC_SSD1306::setNormalDisplay()
{
    sendCommand(SSD1306_Normal_Display_Cmd);
}

void ACROBOTIC_SSD1306::setInverseDisplay()
{
    sendCommand(SSD1306_Inverse_Display_Cmd);
}


ACROBOTIC_SSD1306 oled;  // Pre-instantiate object