Skip to content

Latest commit

 

History

History
187 lines (110 loc) · 7.67 KB

README.md

File metadata and controls

187 lines (110 loc) · 7.67 KB

mindwave-python

Linux and Mac-friendly Python parser to connect and interact with multiple NeuroSky MindWave headsets from one machine.

This is the software used by Moonshot Lab at Barkley (http://moonshot.barkleyus.com/) for all of our internal MindWave projects.

Important

If you're buying black new version MindWave Mobile, then you don't need to insrert any code to connect to the device, the only thing you need to do is to setup the port name in this line:

headset = mindwave.Headset('[port_name]') 

for example, in this case, mine is

/dev/tty.MindWaveMobile-DevA

and just replace the [port_name] on above line, make it:

headset = mindwave.Headset('/dev/tty.MindWaveMobile-DevA') 

then it will work.

#How to find the [port_name]?

Open terminal, in command type:

ls /dev/tty.*

you'll see

/dev/tty.MindWaveMobile-xxx

in the output, that's it!

For the MindWave Mobile bluetooth headsets, it's unnecessary to use the connect() or disconnect() methods. If your operating system automatically creates a serial port for the bluetooth device, there's also no need to specify a headset ID. Just pass the serial device path as a parameter when you create a new Headset object and you're good to go.

Basic Usage

A connection to the headset dongle is established by creating a new Headset object. Find the MindWave device(s) on your machine. On a Mac, it looks like this:

import mindwave

headset = mindwave.Headset('/dev/tty.MindWave', '625f')

Pass in the device path and the headset ID printed inside the battery case.

It's recommended to wait at least a couple seconds before connecting the dongle to the headset:

import mindwave, time

headset = mindwave.Headset('/dev/tty.MindWave', '625f')
time.sleep(2)

headset.connect()
print "Connecting..."

while headset.status != 'connected':
    time.sleep(0.5)
    if headset.status == 'standby':
        headset.connect()
        print "Retrying connect..."
print "Connected."

while True:
    print "Attention: %s, Meditation: %s" % (headset.attention, headset.meditation)

For the MindWave Mobile bluetooth headsets, it's unnecessary to use the connect() or disconnect() methods. If your operating system automatically creates a serial port for the bluetooth device, there's also no need to specify a headset ID. Just pass the serial device path as a parameter when you create a new Headset object and you're good to go.

Auto-connect

The library can also auto-connect the dongle to the first available headset, rather than specifying a headset ID.

import mindwave, time

headset = mindwave.Headset('/dev/tty.MindWave')
time.sleep(2)
headset.connect()

Use headset.autoconnect() to auto-connect explicitly, regardless of whether or not a headset ID was specified.

Multiple headsets

The library can handle multiple devices used simultaneously.

import mindwave, time

h1 = mindwave.Headset('/dev/tty.MindWave', '625f')
h2 = mindwave.Headset('/dev/tty.MindWave2', 'a662')
time.sleep(2)

h1.connect()
print "Connecting h1..."
while h1.status != 'connected':
    time.sleep(0.5)
    if h1.status == 'standby':
        h1.connect()
        print "Retrying connect..."
print "Connected h1."

h2.connect()
print "Connecting h2..."
while h2.status != 'connected':
    time.sleep(0.5)
    if h2.status == 'standby':
        h2.connect()
        print "Retrying connect..."
print "Connected h2."

while True:
    print "Attention 1: %s, Meditation 1: %s" % (h1.attention, h1.meditation)
    print "Attention 2: %s, Meditation 2: %s" % (h2.attention, h2.meditation)

Adding event handlers

The library provides hooks for certain events to allow for the attachment of custom handlers.

def on_blink(headset, blink_strength):
    print "Blink detected. Strength: %s" % blink_strength

headset.blink_handlers.append(on_blink)

API

Available properties

headset. device - The device path of the dongle on the system.

headset. headset_id - The ID of the connected headset.

headset. poor_signal - The "poor signal" reading of the headset connection. This indicates how poorly the headset is reading EEG waves, 0 being the best reading and 255 being the worst. Try readjusting the headset if this value is too high.

headset. attention - The last-read attention value from the headset.

headset. meditation - The last-read meditation value from the headset.

headset. blink - The last-read blink strength from the headset.

headset. status - The current status of the headset: connected, scanning, or standby

Available methods

headset. connect ([headset_id]) - Connect to the specified headset ID. If no headset was specified, the dongle will auto-connect to the first available.

headset. autoconnect () - Auto-connect to the first available headset, regardless of any headset ID specified.

headset. disconnect () - Disconnect the dongle from the headset.

Event hooks

headset. poor_signal_handlers [] - Handlers are fired whenever a poor signal is detected. Expects handlers with the prototype my_function(headset, poor_signal) and passes in the current headset object and poor signal value.

headset. good_signal_handlers [] - Handlers are fired whenever a good signal is detected. Expects handlers with the prototype my_function(headset, poor_signal) and passes in the current headset object and poor signal value.

headset. attention_handlers [] - Handlers are fired whenever an attention value is received. Expects handlers with the prototype my_function(headset, attention) and passes in the current headset object and attention value.

headset. meditation_handlers [] - Handlers are fired whenever an meditation value is received. Expects handlers with the prototype my_function(headset, meditation) and passes in the current headset object and meditation value.

headset. blink_handlers [] - Handlers are fired whenever a blink is detected. Expects handlers with the prototype my_function(headset, blink_strength) and passes in the current headset object and blink strength value.

headset. connected_handlers [] - Handlers are fired whenever the headset is connected. Expects handlers with the prototype my_function(headset) and passes in the current headset object.

headset. notfound_handlers [] - Handlers are fired whenever the headset specified cannot be found. Expects handlers with the prototype my_function(headset, not_found_id) and passes in the current headset object and the headset id that could not be found.

headset. disconnected_handlers [] - Handlers are fired whenever the headset is disconnected. Expects handlers with the prototype my_function(headset) and passes in the current headset object.

headset. request_denied_handlers [] - Handlers are fired whenever a request to the dongle is denied (connect/disconnect/autoconnect). Expects handlers with the prototype my_function(headset) and passes in the current headset object.

headset. scanning_handlers [] - Handlers are fired whenever the dongle begins scanning for a headset. Expects handlers with the prototype my_function(headset) and passes in the current headset object.

headset. standby_handlers [] - Handlers are fired whenever the dongle goes into standby (not connected to a headset). Expects handlers with the prototype my_function(headset) and passes in the current headset object.