Skip to content

Latest commit

 

History

History
1415 lines (1065 loc) · 45.1 KB

UsingLibical.md

File metadata and controls

1415 lines (1065 loc) · 45.1 KB

Using Libical

Author: Eric Busboom [email protected]

Date: January 2001

1 Introduction

Libical is an Open Source implementation of the iCalendar protocols and protocol data units. The iCalendar specification describes how calendar clients can communicate with calendar servers so users can store their calendar data and arrange meetings with other users.

Libical implements multiple [RFC calendar standards](@ref rfcs).

This documentation assumes that you are familiar with the iCalendar standards RFC5545 and RFC5546. These specifications are available at the IETF Tools website:

1.1 The libical project

This code is under active development. If you would like to contribute to the project, visit https://libical.github.io/libical/.

1.2 License

The code and datafiles in this distribution are licensed under the Mozilla Public License version 2.0. See https://www.mozilla.org/MPL for a copy of the license. Alternately, you may use libical under the terms of the GNU Lesser General Public License, version 2.1. See https://www.gnu.org/licenses/lgpl-2.1.html for a copy of the LGPL.

This dual license ensures that the library can be incorporated into both proprietary code and GPL'd programs, and will benefit from improvements made by programmers in both realms. We (the libical developers) will only accept changes to this library if they are similarly dual-licensed.

1.3 Example Code

A lot of the documentation for this library is in the form of example code. These examples are in the examples/ directory of the distribution. Also look in src/test/ for additional annotated examples.

2 Building the Library

Libical uses autoconf to generate makefiles. It should build with no adjustments on Linux, FreeBSD and Solaris under gcc. Some versions have been successfully built on MacOS, Solaris, UnixWare, And Tru64 UNIX without gcc, but you may run into problems with a particular later version.

For a more complete guide to building the library, see the README file in the distribution.

3 Structure

The iCalendar data model is based on four types of objects: components, properties, values and parameters.

Properties are the fundamental unit of information in iCalendar, and they work a bit like a hash entry, with a constant key and a variable value. Properties may also have modifiers, called parameters. In the iCal content line

ORGANIZER;ROLE=CHAIR:MAILTO:[email protected]

The property name is ORGANIZER, the value of the property is [email protected] and the ROLE parameter specifies that Mr Big is the chair of the meetings associated with this property.

Components are groups of properties that represent the core objects of a calendar system, such as events or timezones. Components are delimited by BEGIN and END tags.

When a component is sent across a network, if it is un-encrypted, it will look something like:

BEGIN:VCALENDAR
METHOD:REQUEST
PRODID: -//hacksw/handcal//NONSGML v1.0//EN
BEGIN:VEVENT
DTSTAMP:19980309T231000Z
UID:guid-1.host1.com
ORGANIZER;ROLE=CHAIR:MAILTO:[email protected]
ATTENDEE;RSVP=TRUE;ROLE=REQ-PARTICIPANT;CUTYPE=GROUP:
  MAILTO:[email protected]
DESCRIPTION:Project XYZ Review Meeting
CATEGORIES:MEETING
CLASS:PUBLIC
CREATED:19980309T130000Z
SUMMARY:XYZ Project Review
DTSTART;TZID=US-Eastern:19980312T083000
DTEND;TZID=US-Eastern:19980312T093000
LOCATION:1CP Conference Room 4350
END:VEVENT
END:VCALENDAR

Note that components can be nested; this example has both a VCALENDAR and a VEVENT component, one nested inside the other.

3.1 Core iCal classes

Libical is an object-based, data-oriented library. Nearly all of the routines in the library are associated with an opaque data types and perform some operation on that data type. Although the library does not actually have classes, we will use those terms since the behavior of these associations of data and routines is very similar to a class.

3.1.1 Properties

Properties are represented with the icalproperty class and its many "derived" classes with one "derived" class per property type in [RFC5545][]. Again, there is no actual inheritance relations, but there are clusters of routines that make this term useful. A property is a container for a single value and a set of parameters.

3.1.2 Components

In libical, components are represented with the icalcomponent class. icalcomponent is a container for a set of other components and properties.

3.1.3 Values

Values are represented in a similar way to properties; a base class and many "derived " classes. A value is essentially an abstract handle on a single fundamental type, a structure or a union.

3.1.4 Parameters

Parameters are represented in a similar way to properties, except that they contain only one value.

3.2 Other elements of libical

In addition to the core iCal classes, libical has many other types, structures, and classes that aid in creating and using iCal components.

3.2.1 Enumerations and types

Libical is strongly typed, so every component, property, parameter, and value type has an enumeration, and some have an associated structure or union.

3.2.2 The parser

The libical parser offers a variety of ways to convert [RFC5545][] text into a libical internal component structure. The parser can parse blocks of text as a string, or it can parse line-by-line.

3.2.3 Error objects

Libical has a substantial error reporting system for both programming errors and component usage errors.

3.2.4 Memory Management

Since many of libical's interfaces return strings, the library has its own memory management system to eliminate the need to free every string returned from the library. See Memory Management.

3.2.5 Storage classes

The library also offers several classes to store components to files, memory or databases.

4 Differences From RFCs

Libical has been designed to follow the standards as closely as possible, so that the key objects in the standards are also key objects in the library. However, there are a few areas where the specifications are (arguably) irregular, and following them exactly would result in an unfriendly interface. These deviations make libical easier to use by maintaining a self-similar interface.

4.1 Pseudo Components

Libical defines components for groups of properties that look and act like components, but are not defined as components in the specification. XDAYLIGHT and XSTANDARD are notable examples. These pseudo components group properties within the VTIMEZONE components. For instance, the timezone properties associated with daylight savings time starts with BEGIN:DAYLIGHT and ends with END:DAYLIGHT, just like other components, but is not defined as a component in [RFC5545][] (see section 3.6.5) In libical, this grouping is represented by the XDAYLIGHT component. Standard iCal components all start with the letter "V," while pseudo components start with "X."

There are also pseudo components that are conceptually derived classes of VALARM. [RFC5546][] defines what properties may be included in each component, and for VALARM, the set of properties it may have depends on the value of the ACTION property.

For instance, if a VALARM component has an ACTION property with the value of AUDIO, the component must also have an ATTACH property. However, if the ACTION value is DISPLAY, the component must have a DESCRIPTION property.

To handle these various, complex restrictions, libical has pseudo components for each type of alarm: XAUDIOALARM, XDISPLAYALARM, XEMAILALARM and XPROCEDUREALARM.

4.2 Combined Values

Many values can take more than one type. TRIGGER, for instance, can have a value type of with DURATION or of DATE-TIME. These multiple types make it difficult to create routines to return the value associated with a property.

It is natural to have interfaces that would return the value of a property, but it is cumbersome for a single routine to return multiple types. So, in libical, properties that can have multiple types are given a single type that is the union of their RFC5545 types. For instance, in libical, the value of the TRIGGER property resolves to struct icaltriggertype. This type is a union of a DURATION and a DATE-TIME.

4.3 Multi-Valued Properties

Some properties, such as CATEGORIES have only one value type, but each CATEGORIES property can have multiple value instances. This also results in a cumbersome interface -- CATEGORIES accessors would have to return a list while all other accessors returned a single value. In libical, all properties have a single value, and multi-valued properties are broken down into multiple single valued properties during parsing. That is, an input line like,

CATEGORIES: work, home

becomes in libical's internal representation

CATEGORIES: work
CATEGORIES: home

Oddly, [RFC5545][] allows some multi-valued properties (like FREEBUSY) to exist as both a multi-values property and as multiple single value properties, while others (like CATEGORIES) can only exist as single multi-valued properties. This makes the internal representation for CATEGORIES illegal. However when you convert a component to a string, the library will collect all of the CATEGORIES properties into one.

5 Using libical

5.1 Creating Components

There are three ways to create components in Libical:

  1. creating individual objects and assembling them,
  2. building entire objects in massive vargs calls,
  3. parsing a text file containing iCalendar data.

5.1.1 Constructor Interfaces

Using constructor interfaces, you create each of the objects separately and then assemble them in to components:

icalcomponent *event;
icalproperty *prop;
icalparameter *param;
struct icaltimetype atime;

// create new VEVENT component
event = icalcomponent_new(ICAL_VEVENT_COMPONENT);

// add DTSTAMP property to the event
prop = icalproperty_new_dtstamp(atime);
icalcomponent_add_property(event, prop);

// add UID property to the event
prop = icalproperty_new_uid("guid-1.example.com");
icalcomponent_add_property(event, prop);

// add ORGANIZER (with ROLE=CHAIR) to the event
prop = icalproperty_new_organizer("[email protected]");
param = icalparameter_new_role(ICAL_ROLE_CHAIR);
icalproperty_add_parameter(prop, param);
icalcomponent_add_property(event, prop);

Notice that libical uses a semi-object-oriented style of interface. Most things you work with are objects, that are instantiated with a constructor that has "new" in the name. Also note that, other than the object reference, most structure data is passed in to libical routines by value. Libical has some complex but very regular memory handling rules. These are detailed in section Memory Management.

If any of the constructors fail, they will return 0. If you try to insert 0 into a property or component, or use a zero-valued object reference, libical will either silently ignore the error or will abort with an error message. This behavior is controlled by a compile time flag (ICAL_ERRORS_ARE_FATAL), and will abort by default.

5.1.2 varargs Constructors

There is another way to create complex components, which is arguably more elegant, if you are not horrified by varargs. The varargs constructor interface allows you to create intricate components in a single block of code. Here is the previous examples in the vaargs style.

icalcomponent *calendar;
struct icaltimetype atime;

calendar =
    icalcomponent_vanew(
        ICAL_VCALENDAR_COMPONENT,
        icalproperty_new_version("2.0"),
        icalproperty_new_prodid(
             "-//RDU Software//NONSGML HandCal//EN"),
        icalcomponent_vanew(
            ICAL_VEVENT_COMPONENT,
            icalproperty_new_dtstamp(atime),
            icalproperty_new_uid("guid-1.host1.com"),
            icalproperty_vanew_organizer(
                "[email protected]",
                icalparameter_new_role(ICAL_ROLE_CHAIR),
                (void *)0),
            icalproperty_vanew_attendee(
                "[email protected]",
                icalparameter_new_role(
                    ICAL_ROLE_REQPARTICIPANT),
                icalparameter_new_rsvp(1),
                icalparameter_new_cutype(ICAL_CUTYPE_GROUP),
                (void *)0),
            icalproperty_new_location(
               "1CP Conference Room 4350"),
            (void *)0),
        (void *)0);

This form is similar to the constructor form, except that the constructors have vanew instead of new in the name. The arguments are similar too, except that the component constructor can have a list of properties, and the property constructor can have a list of parameters.

Be sure to terminate every list with a NULL (or a (void 0), or your code will crash, if you are lucky. The reason you can't use 0 itself is that depending on what platform you are on, sizeof(int) ≠ sizeof(void *).

5.1.3 Parsing Text Files

The final way to create components will probably be the most common; you can create components from [RFC5545][] compliant text. If you have the string in memory, use

icalcomponent* icalparser_parse_string(char* str);

If the string contains only one component, the parser will return the component in libical form. If the string contains multiple components, the multiple components will be returned as the children of an ICAL_XROOT_COMPONENT component.

Parsing a whole string may seem wasteful if you want to pull a large component off of the network or from a file; you may prefer to parse the component line by line. This is possible too by using:

icalparser* icalparser_new();

void icalparser_free(
    icalparser* parser);

icalparser_get_line(
    icalparser *parser,
    char* (*read_stream)(char *s, size_t size,  void *d));

icalparser_add_line(
    icalparser *parser,
    char *line);

icalparser_set_gen_data(
    icalparser *parser,
    void *data);

These routines will construct a parser object to which you can add lines of input and retrieve any components that the parser creates from the input. These routines work by specifying an adaptor routine to get string data from a source. For example:

char* read_stream(char *s, size_t size, void *d)
{
    return fgets(s, size, (FILE*)d);
}

int main(int argc, char *argv[])
{
    char *line;
    icalcomponent *component;
    icalparser *parser = icalparser_new();

    // open file (first command-line argument)
    FILE* stream = fopen(argv[1], "r");

    // associate the FILE with the parser so that read_stream
    // will have access to it
    icalparser_set_gen_data(parser, stream);

    do {
        // read the file, line-by-line, and parse the data
        line = icalparser_get_line(parser, read_stream);
        component = icalparser_add_line(parser, line);

        // if icalparser has finished parsing a component,
        // it will return it
        if (component != 0) {
            // print the parsed component
            printf("%s", icalcomponent_as_ical_string(component));
            icalparser_clean(parser);

            printf("\n---------------\n");

            icalcomponent_free(component);
        }
    } while (line != 0);

    return 0;
}

The parser object parametrizes the routine used to get input lines with icalparser_set_gen_data()and icalparser_get_line(). In this example, the routine read_stream() will fetch the next line from a stream, with the stream passed in as the void* parameter d. The parser calls read_stream() from icalparser_get_line(), but it also needs to know what stream to use. This is set by the call to icalparser_set_gen_data(). By using a different routine for read_stream() or passing in different data with icalparser_set_gen_data(), you can connect to any data source.

Using the same mechanism, other implementations could read from memory buffers, sockets or other interfaces.

Since the example code is a very common way to use the parser, there is a convenience routine;

icalcomponent* icalparser_parse(
    icalparser *parser,
    char* (*line_gen_func)(char *s, size_t size,  void *d));

To use this routine, you still must construct the parser object and pass in a reference to a line reading routine. If the parser can create a single component from the input, it will return a pointer to the newly constructed component. If the parser can construct multiple components from the input, it will return a reference to an XROOT component (of type ICAL_XROOT_COMPONENT.) This XROOT component will hold all of the components constructed from the input as children.

char* read_stream(char *s, size_t size, void *d)
{
    return fgets(s, size, (FILE*)d);
}

int main(int argc, char *argv[])
{
    char* line;
    icalcomponent *component;
    icalparser *parser = icalparser_new();

    // open file (first command-line argument)
    FILE* stream = fopen(argv[1], "r");

    // associate the FILE with the parser so that read_stream
    // will have access to it
    icalparser_set_gen_data(parser, stream);

    // parse the opened file
    component = icalparser_parse(parser, read_stream);

    if (component != 0) {
        // print the parsed component
        printf("%s", icalcomponent_as_ical_string(component));
        icalcomponent_free(component);
    }

    icalparser_free(parser);

    return 0;
}

5.2 Accessing Components

Given a reference to a component, you probably will want to access the properties, parameters and values inside. Libical interfaces let you find sub-component, add and remove sub-components, and do the same three operations on properties.

5.2.1 Finding Components

To find a sub-component of a component, use:

icalcomponent* icalcomponent_get_first_component(
    icalcomponent* component,
    icalcomponent_kind kind);

This routine will return a reference to the first component of the type kind. The key kind values, listed in icalenums.h are:

  • ICAL_ANY_COMPONENT
  • ICAL_VEVENT_COMPONENT
  • ICAL_VTODO_COMPONENT
  • ICAL_VJOURNAL_COMPONENT
  • ICAL_VCALENDAR_COMPONENT
  • ICAL_VFREEBUSY_COMPONENT
  • ICAL_VALARM_COMPONENT

These are only the most common components; there are many more listed in icalenums.h.

As you might guess, if there is more than one subcomponent of the type you have chosen, this routine will return only the first. to get at the others, you need to iterate through the component.

5.2.2 Iterating Through Components

Iteration requires a second routine to get the next subcomponent after the first:

icalcomponent* icalcomponent_get_next_component(
    icalcomponent* component,
    icalcomponent_kind kind);

With the 'first' and 'next' routines, you can create a for loop to iterate through all of a components subcomponents

icalcomponent *c;

for(c = icalcomponent_get_first_component(comp, ICAL_ANY_COMPONENT);
    c != 0;
    c = icalcomponent_get_next_component(comp, ICAL_ANY_COMPONENT))
{
      do_something(c);
}

This code bit will iterate through all of the subcomponents in comp but you can select a specific type of component by changing ICAL_ANY_COMPONENT to another component type.

5.2.3 Using Component Iterators

The iteration model in the previous section requires the component to keep the state of the iteration. So, you could not use this model to perform a sorting operations, since you'd need two iterators and there is only space for one. If you ever call icalcomponent_get_first_component() when an iteration is in progress, the pointer will be reset to the beginning.

To solve this problem, there are also external iterators for components. The routines associated with these external iterators are:

icalcompiter icalcomponent_begin_component(
    icalcomponent* component,
    icalcomponent_kind kind);

icalcompiter icalcomponent_end_component(
    icalcomponent* component,
    icalcomponent_kind kind);

icalcomponent* icalcompiter_next(
    icalcompiter* i);

icalcomponent* icalcompiter_prior(
    icalcompiter* i);

icalcomponent* icalcompiter_deref(
    icalcompiter* i);

The *_begin_*() and *_end_*() routines return a new iterator that points to the beginning and end of the list of subcomponent for the given component, and the kind argument works like the kind argument for internal iterators.

After creating an iterators, use *_next() and *_prior() to step forward and backward through the list and get the component that the iterator points to, and use _deref() to return the component that the iterator points to without moving the iterator. All routines will return 0 when they move to point off the end of the list.

Here is an example of a loop using these routines:

for(i = icalcomponent_begin_component(impl->cluster, ICAL_ANY_COMPONENT);
    icalcompiter_deref(&i)!= 0;
    icalcompiter_next(&i))
{
    icalcomponent *this = icalcompiter_deref(&i);
}

5.2.4 Removing Components

Removing an element from a list while iterating through the list with the internal iterators can cause problems, since you will probably be removing the element that the internal iterator points to. The _remove() routine will keep the iterator valid by moving it to the next component, but in a normal loop, this will result in two advances per iteration, and you will remove only every other component. To avoid the problem, you will need to step the iterator ahead of the element you are going to remove, like this:

for(c = icalcomponent_get_first_component(parent_comp, ICAL_ANY_COMPONENT);
    c != 0;
    c = next)
{
    next = icalcomponent_get_next_component(parent_comp, ICAL_ANY_COMPONENT);
    icalcomponent_remove_component(parent_comp,c);
}

Another way to remove components is to rely on the side effect of icalcomponent_remove_component(): if component iterator in the parent component is pointing to the child that will be removed, it will move the iterator to the component after the child. The following code will exploit this behavior:

icalcomponent_get_first_component(parent_comp,ICAL_VEVENT_COMPONENT);

while((c=icalcomponent_get_current_component(c)) != 0){
   if(icalcomponent_isa(c) == ICAL_VEVENT_COMPONENT){
      icalcomponent_remove_component(parent_comp,inner);
   } else {
      icalcomponent_get_next_component(parent_comp,ICAL_VEVENT_COMPONENT);
   }
}

5.2.5 Working with properties and parameters

Finding, iterating and removing properties works the same as it does for components, using the property-specific or parameter-specific interfaces:

icalproperty* icalcomponent_get_first_property(
    icalcomponent* component,
    icalproperty_kind kind);

icalproperty* icalcomponent_get_next_property(
    icalcomponent* component,
    icalproperty_kind kind);

void icalcomponent_add_property(
    icalcomponent* component,
    icalproperty* property);

void icalcomponent_remove_property(
    icalcomponent* component,
    icalproperty* property);

For parameters:

icalparameter* icalproperty_get_first_parameter(
     icalproperty* prop,
     icalparameter_kind kind);

icalparameter* icalproperty_get_next_parameter(
     icalproperty* prop,
     icalparameter_kind kind);

void icalproperty_add_parameter(
     icalproperty* prop,
     icalparameter* parameter);

void icalproperty_remove_parameter_by_kind(
     icalproperty* prop,
     icalparameter_kind kind);

Note that since there should be only one parameter of each type in a property, you will rarely need to use icalparameter_get_next_parameter().

5.2.6 Working with values

Values are typically part of a property, although they can exist on their own. You can manipulate them either as part of the property or independently.

The most common way to work with values to is to manipulate them from the properties that contain them. This involves fewer routine calls and intermediate variables than working with them independently, and it is type-safe.

For each property, there are a _get_() and a _set_() routine that accesses the internal value. For instanace, for the UID property, the routines are:

void icalproperty_set_uid(
    icalproperty* prop,
    const char* v);

const char* icalproperty_get_uid(
    icalproperty* prop);

For multi-valued properties, like ATTACH, the value type is usually a struct or union that holds both possible types.

If you want to work with the underlying value object, you can get and set it with:

icalvalue* icalproperty_get_value(
    icalproperty* prop);

void icalproperty_set_value(
    icalproperty* prop,
    icalvalue* value);

icalproperty_get_value() will return a reference that you can manipulate with other icalvalue routines. Most of the time, you will have to know what the type of the value is. For instance, if you know that the value is a DATETIME type, you can manipulate it with:

struct icaltimetype icalvalue_get_datetime(
    icalvalue* value);

void icalvalue_set_datetime(
    icalvalue* value,
    struct icaltimetype v);

When working with an extension property or value (and X-PROPERTY or a property that has the parameter VALUE=x-name), the value type is always a string. To get and set the value, use:

void icalproperty_set_x(
    icalproperty* prop,
    char* v);

char* icalproperty_get_x(
    icalproperty* prop);

All X properties have the type of ICAL_X_PROPERTY, so you will need these routines to get and set the name of the property:

char* icalproperty_get_x_name(
    icalproperty* prop)

void icalproperty_set_x_name(
    icalproperty* prop,
    char* name);

5.2.7 Checking Component Validity

[RFC5546][] defines rules for what properties must exist in a component to be used for transferring scheduling data. Most of these rules relate to the existence of properties relative to the METHOD property, which declares what operation a remote receiver should use to process a component. For instance, if the METHOD is REQUEST and the component is a VEVENT, the sender is probably asking the receiver to join in a meeting. In this case, RFC5546 says that the component must specify a start time (DTSTART) and list the receiver as an attendee (ATTENDEE).

Libical can check these restrictions with the routine:

int icalrestriction_check(icalcomponent* comp);

This routine returns 0 if the component does not pass RFC5546 restrictions, or if the component is malformed. The component you pass in must be a VCALENDAR, with one or more children, like the examples in RFC5546.

When this routine runs, it will insert new properties into the component to indicate any errors it finds. See section 6.5.3, X-LIC-ERROR for more information about these error properties.

5.2.8 Converting Components to Text

To create an RFC5545 compliant text representation of an object, use one of the *_as_ical_string() routines:

char* icalcomponent_as_ical_string(icalcomponent* component)

char* icalproperty_as_ical_string(icalproperty* property)

char* icalparameter_as_ical_string(icalparameter* parameter)

char* icalvalue_as_ical_string(icalvalue* value)

In most cases, you will only use icalcomponent_as_ical_string(), since it will cascade and convert all of the parameters, properties and values that are attached to the root component.

Remember that the string returned by these routines is owned by the library, and will eventually be re-written. You should copy it if you want to preserve it.

5.3 Time

5.3.1 Time structure

Libical defines its own time structure for storing all dates and times. It would have been nice to reuse the C library's struct tm, but that structure does not differentiate between dates and times, and between local time and UTC. The libical structure is:

struct icaltimetype {
  int year;
  int month;
  int day;
  int hour;
  int minute;
  int second;
  int is_utc; /* 1-> time is in UTC timezone */
  int is_date; /* 1 -> interpret this as date. */
};

The year, month, day, hour, minute and second fields hold the broken-out time values. The is_utc field distinguishes between times in UTC and a local time zone. The is_date field indicates if the time should be interpreted only as a date. If it is a date, the hour, minute and second fields are assumed to be zero, regardless of their actual values.

5.3.2 Creating time structures

There are several ways to create a new icaltimetype structure:

struct icaltimetype icaltime_from_string(
    const char* str);

struct icaltimetype icaltime_from_timet_with_zone(
    icaltime_t v,
    int is_date,
    icaltimezone* zone);

icaltime_from_string() takes any RFC5545 compliant time string:

struct icaltimetype tt = icaltime_from_string("19970101T103000");

icaltime_from_timet_with_zone() takes a icaltime_t value, representing seconds past the POSIX epoch, a flag to indicate if the time is a date, and a time zone. Dates have an identical structure to a time, but the time portion (hours, minutes and seconds) is always 00:00:00. Dates act differently in sorting and comparison, and they have a different string representation in [RFC5545][].

5.3.3 Time manipulating routines

The null time value is used to indicate that the data in the structure is not a valid time.

struct icaltimetype icaltime_null_time(void);

int icaltime_is_null_time(struct icaltimetype t);

It is sensible for the broken-out time fields to contain values that are not permitted in an ISO compliant time string. For instance, the seconds field can hold values greater than 59, and the hours field can hold values larger than 24. The excessive values will be rolled over into the next larger field when the structure is normalized.

struct icaltimetype icaltime_normalize(struct icaltimetype t);

Normalizing allows you to do arithmetic operations on time values.

struct icaltimetype tt = icaltime_from_string("19970101T103000");

tt.days +=3
tt.second += 70;

tt = icaltime_normalize(tt);

There are several routines to get the day of the week or month, etc, from a time structure.

short icaltime_day_of_year(
    struct icaltimetype t);

struct icaltimetype icaltime_from_day_of_year(
    short doy,
    short year);

short icaltime_day_of_week(
    struct icaltimetype t);

short icaltime_start_doy_week(
    struct icaltimetype t,
    int fdow);

short icaltime_week_number(
    short day_of_month,
    short month,
    short year);

short icaltime_days_in_month(
    short month,
    short year);

Two routines convert time structures to and from the number of seconds since the POSIX epoch. The is_date field indicates whether or not the hour, minute and second fields should be used in the conversion.

struct icaltimetype icaltime_from_timet_with_zone(
    icaltime_t v,
    int is_date,
    icaltimezone* zone);

icaltime_t icaltime_as_timet(
    struct icaltimetype);

The compare routine works exactly like strcmp(), but on time structures.

int icaltime_compare(
    struct icaltimetype a,
    struct icaltimetype b);

The following routines convert between UTC and a named timezone. The tzid field must be a timezone name from the Olsen database, such as America/Los_Angeles.

The utc_offset routine returns the offset of the named time zone from UTC, in seconds.

The tt parameter in the following routines indicates the date on which the conversion should be made. The parameter is necessary because timezones have many different rules for when daylight savings time is used, and these rules can change over time. So, for a single timezone one year may have daylight savings time on March 15, but for other years March 15 may be standard time, and some years may have standard time all year.

int icaltime_utc_offset(
    struct icaltimetype tt,
    char* tzid);

int icaltime_local_utc_offset();

struct icaltimetype icaltime_as_utc(
    struct icaltimetype tt,
    char* tzid);

struct icaltimetype icaltime_as_zone(
    struct icaltimetype tt,
    char* tzid);

struct icaltimetype icaltime_as_local(
    struct icaltimetype tt);

5.4 Storing Objects

The libical distribution includes a separate library, libicalss, that allows you to store iCal component data to disk in a variety of ways.

The file storage routines are organized in an inheritance hierarchy that is rooted in icalset, with the derived class icalfileset and icaldirset. Icalfileset stores components to a file, while icaldirset stores components to multiple files, one per month based on DTSTAMP. Other storages classes, for storage to a heap or a mysql database for example, could be added in the future.

All of the icalset derived classes have the same interface:

icaldirset* icaldirset_new(
    const char* path);

void icaldirset_free(
    icaldirset* store);

const char* icaldirset_path(
    icaldirset* store);

void icaldirset_mark(
    icaldirset* store);

icalerrorenum icaldirset_commit(
    icaldirset* store);

icalerrorenum icaldirset_add_component(
    icaldirset* store,
    icalcomponent* comp);

icalerrorenum icaldirset_remove_component(
    icaldirset* store,
    icalcomponent* comp);

int icaldirset_count_components(
    icaldirset* store,
    icalcomponent_kind kind);

icalerrorenum icaldirset_select(
    icaldirset* store,
    icalcomponent* gauge);

void icaldirset_clear(
    icaldirset* store);

icalcomponent* icaldirset_fetch(
    icaldirset* store,
    const char* uid);

int icaldirset_has_uid(
    icaldirset* store,
    const char* uid);

icalcomponent* icaldirset_fetch_match(
    icaldirset* set,
    icalcomponent *c);

icalerrorenum icaldirset_modify(
    icaldirset* store,
    icalcomponent *oldc,
    icalcomponent *newc);

icalcomponent* icaldirset_get_current_component(
    icaldirset* store);

icalcomponent* icaldirset_get_first_component(
    icaldirset* store);

icalcomponent* icaldirset_get_next_component(
    icaldirset* store);

5.4.1 Creating a new set

You can create a new set from either the base class or the direved class. From the base class use one of:

icalset* icalset_new_file(const char* path);

icalset* icalset_new_dir(const char* path);

icalset* icalset_new_heap(void);

icalset* icalset_new_mysql(const char* path);

You can also create a new set based on the derived class, For instance, with icalfileset:

icalfileset* icalfileset_new(
    const char* path);

icalfileset* icalfileset_new_open(
    const char* path,
    int flags,
    int mode);

icalset_new_file() is identical to icalfileset_new(). Both routines will open an existing file for reading and writing, or create a new file if it does not exist. icalfileset_new_open() takes the same arguments as the open() system routine and behaves in the same way.

The icalset and icalfileset objects are somewhat interchangeable -- you can use an icalfileset* as an argument to any of the icalset routines.

The following examples will all use icalfileset routines; using the other icalset derived classes will be similar.

5.4.2 Adding, Finding and Removing Components

To add components to a set, use:

icalerrorenum icalfileset_add_component(
    icalfileset* cluster,
    icalcomponent* child);

The fileset keeps an in-memory copy of the components, and this set must be written back to the file occasionally. There are two routines to manage this:

void icalfileset_mark(icalfileset* cluster);

icalerrorenum icalfileset_commit(icalfileset* cluster);

icalfileset_mark() indicates that the in-memory components have changed. Calling the _add_component() routine will call _mark() automatically, but you may need to call it yourself if you have made a change to an existing component. The _commit() routine writes the data base to disk, but only if it is marked. The _commit() routine is called automatically when the icalfileset is freed.

To iterate through the components in a set, use:

icalcomponent* icalfileset_get_first_component(icalfileset* cluster);

icalcomponent* icalfileset_get_next_component(icalfileset* cluster);

icalcomponent* icalfileset_get_current_component (icalfileset* cluster);

These routines work like the corresponding routines from icalcomponent, except that their output is filtered through a gauge. A gauge is a test for the properties within a components; only components that pass the test are returned. A gauge can be constructed from a MINSQL string with:

icalgauge* icalgauge_new_from_sql(const char* sql);

Then, you can add the gauge to the set with :

icalerrorenum icalfileset_select(
    icalfileset* store,
    icalgauge* gauge);

Here is an example that puts all of these routines together:

void test_fileset()
{
    icalfileset *fs;
    icalcomponent *c;
    int i;
    char *path = "test_fileset.ics";

    icalgauge  *g = icalgauge_new_from_sql(
        "SELECT * FROM VEVENT WHERE DTSTART > '20000103T120000Z' AND
DTSTART <= '20000106T120000Z'");

    fs = icalfileset_new(path);

    for (i = 0; i!= 10; i++){
        c = make_component(i); /* Make a new component where DTSTART has month of i */
        icalfileset_add_component(fs,c);
    }

    icalfileset_commit(fs); /* Write to disk */
    icalfileset_select(fs,g); /* Set the gauge to filter components */

    for (c = icalfileset_get_first_component(fs);
         c != 0;
         c = icalfileset_get_next_component(fs))
    {
        struct icaltimetype t = icalcomponent_get_dtstart(c);
        printf("%s\n",icaltime_as_ctime(t));

    }

    icalfileset_free(fs);
}

5.4.3 Other routines

There are several other routines in the icalset interface, but they not fully implemented yet.

5.5 Memory Management

Libical relies heavily on dynamic allocation for both the core objects and for the strings used to hold values. Some of this memory the library caller owns and must free, and some of the memory is managed by the library. Here is a summary of the memory rules.

  1. If the function name has "new" in it (such as icalcomponent_new(), or icalproperty_new_from_string()), the caller gets control of the memory. The caller also gets control over an object that is cloned via a function that ends with "_clone" (like icalcomponent_clone())

  2. If you got the memory from a routine with "clone" or "new" in it, you must call the corresponding *_free() routine to free the memory, for example use icalcomponent_free() to free objects created with icalcomponent_new() or icalcomponent_clone()

  3. If the function name has "add" in it, the caller is transferring control of the memory to the routine, for example the function icalproperty_add_parameter()

  4. If the function name has "remove" in it, the caller passes in a pointer to an object and after the call returns, the caller owns the object. So, before you call icalcomponent_remove_property(comp, foo), you do not own "foo" and after the call returns, you do.

  5. If the routine returns a string and its name does NOT end in _r, libical owns the memory and will put it on a ring buffer to reclaim later. For example, icalcomponent_as_ical_string(). You better strdup() it if you want to keep it, and you don't have to delete it.

  6. If the routine returns a string and its name does end in _r, the caller gets control of the memory and is responsible for freeing it. For example, icalcomponent_as_ical_string_r() does the same thing as icalcomponent_as_ical_string(), except you now have control of the string buffer it returns.

5.6 Error Handling

Libical has several error handling mechanisms for the various types of programming, semantic and syntactic errors you may encounter.

5.6.1 Return values

Many library routines signal errors through their return values. All routines that return a pointer, such as icalcomponent_new(), will return 0 (zero) on a fatal error. Some routines will return a value of enum icalerrorenum.

5.6.2 icalerrno

Most routines will set the global error value icalerrno on errors. This variable is an enumeration; permissible values can be found in libical/icalerror.h. If the routine returns an enum icalerrorenum, then the return value will be the same as icalerrno. You can use icalerror_strerror() to get a string that describes the error. The enumerations are:

  • ICAL_BADARG_ERROR: One of the arguments to a routine was bad. Typically for a null pointer.

  • ICAL_NEWFAILED_ERROR: A new() or malloc() failed.

  • ICAL_MALFORMEDDATA_ERROR: An input string was not in the correct format

  • ICAL_PARSE_ERROR: The parser failed to parse an incoming component

  • ICAL_INTERNAL_ERROR: Largely equivalent to an assert

  • ICAL_FILE_ERROR: A file operation failed. Check errno for more detail.

  • ICAL_ALLOCATION_ERROR: ?

  • ICAL_USAGE_ERROR: ?

  • ICAL_NO_ERROR: No error

  • ICAL_MULTIPLEINCLUSION_ERROR: ?

  • ICAL_TIMEDOUT_ERROR: For CSTP and acquiring locks

  • ICAL_UNKNOWN_ERROR: ?

5.6.3 X-LIC-ERROR and X-LIC-INVALID-COMPONENT

The library handles semantic and syntactic errors in components by inserting errors properties into the components. If the parser cannot parse incoming text (a syntactic error) or if the icalrestriction_check() routine indicates that the component does not meet the requirements of RFC5546 (a semantic error) the library will insert properties of the type X-LIC-ERROR to describe the error. Here is an example of the error property:

X-LIC-ERROR;X-LIC-ERRORTYPE=INVALID_ITIP :Failed iTIP restrictions
for property DTSTART.

Expected 1 instances of the property and got 0

This error resulted from a call to icalrestriction_check(), which discovered that the component does not have a DTSTART property, as required by RFC5545.

There are a few routines to manipulate error properties:

Routine Purpose
void icalrestriction_check() Check a component against RFC5546 and insert error properties to indicate non compliance
int icalcomponent_count_errors() Return the number of error properties in a component
void icalcomponent_strip_errors() Remove all error properties in a component
void icalcomponent_convert_errors() Convert some error properties into REQUESTS-STATUS properties to indicate the inability to process the component as an iTIP request

The types of errors are listed in icalerror.h. They are:

  • ICAL_XLICERRORTYPE_COMPONENTPARSEERROR
  • ICAL_XLICERRORTYPE_PARAMETERVALUEPARSEERROR
  • ICAL_XLICERRORTYPE_PARAMETERNAMEPARSEERROR
  • ICAL_XLICERRORTYPE_PROPERTYPARSEERROR
  • ICAL_XLICERRORTYPE_VALUEPARSEERROR
  • ICAL_XLICERRORTYPE_UNKVCALPROP
  • ICAL_XLICERRORTYPE_INVALIDITIP

The libical parser will generate the error that end in PARSEERROR when it encounters garbage in the input steam. ICAL_XLICERRORTYPE_INVALIDITIP is inserted by icalrestriction_check(), and ICAL_XLICERRORTYPE_UNKVCALPROP is generated by icalvcal_convert() when it encounters a vCal property that it cannot convert or does not know about.

icalcomponent_convert_errors() converts some of the error properties in a component into REQUEST-STATUS properties that indicate a failure. As of libical version 0.18, this routine only converts PARSEERROR errors and it always generates a 3.x (failure) code. This makes it more of a good idea than a really useful bit of code.

5.6.4 ICAL_ERRORS_ARE_FATAL and icalerror_errors_are_fatal

If icalerror_get_errors_are_fatal() returns 1, then any error condition will cause the program to abort. The abort occurs in icalerror_set_errno(), and is done with an assert(0) if NDEBUG is undefined, and with icalerror_crash_here() if NDEBUG is defined. Initially, icalerror_get_errors_are_fatal() is 1 when ICAL_ERRORS_ARE_FATAL is defined, and 0 otherwise. Since ICAL_ERRORS_ARE_FATAL is defined by default, icalerror_get_errors_are_fatal() is also set to 1 by default.

You can change the compiled-in ICAL_ERRORS_ARE_FATAL behavior at runtime by calling icalerror_set_errors_are_fatal(0) (i.e, errors are not fatal) or icalerror_set_errors_are_fatal(1) (i.e, errors are fatal).

5.7 Naming Standard

Structures that you access with the "struct" keyword, such as struct icaltimetype are things that you are allowed to see inside and poke at.

Structures that you access though a typedef, such as icalcomponent are things where all of the data is hidden.

Component names that start with "V" are part of RFC5545 or another iCal standard. Component names that start with "X" are also part of the spec, but they are not actually components in the spec. However, they look and act like components, so they are components in libical. Names that start with XLIC or X-LIC are not part of any iCal spec. They are used internally by libical.

Enums that identify a component, property, value or parameter end with _COMPONENT, _PROPERTY, _VALUE, or _PARAMETER"

Enums that identify a parameter value have the name of the parameter as the second word. For instance: ICAL_ROLE_REQPARTICIPANT or ICAL_PARTSTAT_ACCEPTED.

The enums for the parts of a recurrence rule and request statuses are irregular.

6 Hacks and Bugs

There are a lot of hacks in the library -- bits of code that I am not proud of and should probably be changed. These are marked with the comment string "HACK."

7 Library Reference

7.1 Manipulating struct icaltimetype

7.1.1 Struct icaltimetype

struct icaltimetype

{
    int year;
    int month;
    int day;
    int hour;
    int minute;
    int second;
    int is_utc;
    int is_date;
    const char* zone;
};