Skip to content

Latest commit

 

History

History
657 lines (485 loc) · 26.3 KB

getting-started.md

File metadata and controls

657 lines (485 loc) · 26.3 KB

Getting Started

SFTPGo allows to securely share your files over SFTP and optionally FTP/S and WebDAV too. Several storage backends are supported and they are configurable per user, so you can serve a local directory for a user and an S3 bucket (or part of it) for another one. SFTPGo also supports virtual folders, a virtual folder can use any of the supported storage backends. So you can have, for example, a user with the S3 backend mapping a GCS bucket (or part of it) on a specified path and an encrypted local filesystem on another one. Virtual folders can be private or shared among multiple users, for shared virtual folders you can define different quota limits for each user.

In this tutorial we explore the main features and concepts using the built-in web admin interface. Advanced users can also use the SFTPGo REST API

Installation

You can easily install SFTPGo in several ways, more details here.

In this guide, we assume that SFTPGo is already installed and running using the default configuration.

Initial configuration

Before you can use SFTPGo you need to create an admin account, so open http://127.0.0.1:8080/web/admin in your web browser, replacing 127.0.0.1 with the appropriate IP address if SFTPGo is not running on localhost.

Setup

After creating the admin account you will be automatically logged in and redirected to the page to set up two-factor authentication. Setting up two-factor authentication is optional.

Users list

The web admin is now available at the following URL:

http://127.0.0.1:8080/web/admin

From the Status page you see the active services.

Status

The default configuration enables the SFTP service on port 2022 and uses an embedded data provider (SQLite or bolt based on the target OS and architecture).

Creating users

Let's create our first local user:

  • from the Users page click the + icon to open the Add user page
  • the only required fields are the Username and a Password or a Public key
  • if you are on Windows or you installed SFTPGo manually and no users_base_dir is defined in your configuration file you also have to set a Home Dir. It must be an absolute path, for example /srv/sftpgo/data/username on Linux or C:\sftpgo\data\username on Windows. SFTPGo will try to automatically create the home directory, if missing, when the user logs in. Each user can only access files and folders inside its home directory.
  • click Save

Add user

⚠️ Please note that, on Linux, SFTPGo runs using a dedicated system user and group called sftpgo, for added security. If you want to be able to use directories outside the /srv/sftpgo path you need to set the appropriate system level permissions. For example if you define /home/username/test as home dir you have to create this directory yourself, if it doesn't exist, and set the appropriate system-level permissions:

sudo mkdir /home/username/test
sudo chown sftpgo:sftpgo /home/username/test

You also need to make sure that the sftpgo system user has at least the read permission for any parent directory, so in the example above /home/username and /home must not have 0700 permissions.

Now test the new user, we use the sftp CLI here, you can use any SFTP client.

$ sftp -P 2022 [email protected]
[email protected]'s password:
Connected to 127.0.0.1.
sftp> ls
sftp> put file.txt
Uploading file.txt to /file.txt
file.txt                                      100% 4034     3.9MB/s   00:00
sftp> ls
file.txt
sftp> mkdir adir
sftp> cd adir/
sftp> put file.txt
Uploading file.txt to /adir/file.txt
file.txt                                      100% 4034     4.0MB/s   00:00
sftp> ls
file.txt
sftp> get file.txt
Fetching /adir/file.txt to file.txt
/adir/file.txt                                100% 4034     1.9MB/s   00:00

It worked! We can upload/download files and create directories.

Each user can browse and download their files, share files with external users, change their credentials and configure two-factor authentication using the WebClient interface available at the following URL:

http://127.0.0.1:8080/web/client

WebClient files

WebClient two-factor authentication

Creating users with a Cloud Storage backend

The procedure is similar to the one described for local users, you have only specify the Cloud Storage backend and its credentials.

The screenshot below shows an example configuration for an S3 backend.

S3 user S3 user

The screenshot below shows an example configuration for an Azure Blob Storage backend.

Azure Blob user Azure Blob user

The screenshot below shows an example configuration for a Google Cloud Storage backend.

Google Cloud user

The screenshot below shows an example configuration for an SFTP server as storage backend.

User using another SFTP server as storage backend

Setting a Key Prefix you restrict the user to a specific "sub-folder" in the bucket, so that the same bucket can be shared among different users.

Creating users with a local encrypted backend (Data At Rest Encryption)

The procedure is similar to the one described for local users, you have only specify the encryption passphrase. The screenshot below shows an example configuration.

User with cryptfs backend

You can find more details about Data At Rest Encryption here.

Virtual permissions

SFTPGo supports per directory virtual permissions. For each user you have to specify global permissions and then override them on a per-directory basis.

Take a look at the following screens.

Permissions

This user has full access as default (*), can only list and download from /read-only path and has no permissions at all for the /subdir path.

Let's test it. We use the sftp CLI here, you can use any SFTP client.

$ sftp -P 2022 [email protected]
Connected to 127.0.0.1.
sftp> ls
adir        file.txt    read-only   subdir
sftp> put file.txt
Uploading file.txt to /file.txt
file.txt                                                                  100% 4034    19.4MB/s   00:00
sftp> rm file.txt
Removing /file.txt
sftp> ls
adir        read-only   subdir
sftp> cd read-only/
sftp> ls
file.txt
sftp> put file1.txt
Uploading file1.txt to /read-only/file1.txt
remote open("/read-only/file1.txt"): Permission denied
sftp> get file.txt
Fetching /read-only/file.txt to file.txt
/read-only/file.txt                                                       100% 4034     2.2MB/s   00:00
sftp> cd ..
sftp> ls
adir        read-only   subdir
sftp> cd /subdir
sftp> ls
remote readdir("/subdir"): Permission denied

as you can see it worked as expected.

Virtual folders

A virtual folder is a mapping between a SFTPGo virtual path and a filesystem path outside the user home directory or on a different storage provider. Therefore, there is no need to create virtual folders for the users home directory or for directories within the users home directory.

From the web admin interface click Folders and then the + icon.

Add folder

To create a local folder you need to specify a Name and an Absolute path. For other backends you have to specify the backend type and its credentials, this is the same procedure already detailed for creating users with cloud backends.

Suppose we created two virtual folders name localfolder and minio as you can see in the following screen.

Folders

  • localfolder uses the local filesystem as storage backend
  • minio uses MinIO (S3 compatible) as storage backend

Now, click Users, on the left menu, select a user and click the Edit icon, to update the user and associate the virtual folders.

Virtual folders must be referenced using their unique name and you can map them on a configurable virtual path. Take a look at the following screenshot.

Virtual Folders

We mapped the folder named localfolder on the path /vdirlocal (this must be an absolute UNIX path on Windows too) and the folder named minio on the path /vdirminio. For localfolder the quota usage is included within the user quota, while for the minio folder we defined separate quota limits: at most 2 files and at most 100MB, whichever is reached first.

The folder minio can be shared with other users and we can define different quota limits on a per-user basis. The folder localfolder is considered private since we have included its quota limits within those of the user, if we share them with other users we will break quota calculation.

Let's test these virtual folders. We use the sftp CLI here, you can use any SFTP client.

$ sftp -P 2022 [email protected]
[email protected]'s password:
Connected to 127.0.0.1.
sftp> ls
adir        read-only   subdir      vdirlocal   vdirminio
sftp> cd vdirlocal
sftp> put file.txt
Uploading file.txt to /vdirlocal/file.txt
file.txt                                                                  100% 4034    17.3MB/s   00:00
sftp> ls
file.txt
sftp> cd ..
sftp> cd vdirminio/
sftp> put file.txt
Uploading file.txt to /vdirminio/file.txt
file.txt                                                                  100% 4034     4.8MB/s   00:00
sftp> ls
file.txt
sftp> put file.txt file1.txt
Uploading file.txt to /vdirminio/file1.txt
file.txt                                                                  100% 4034     2.8MB/s   00:00
sftp> put file.txt file2.txt
Uploading file.txt to /vdirminio/file2.txt
remote open("/vdirminio/file2.txt"): Failure
sftp> quit

The last upload failed since we exceeded the number of files quota limit.

Groups

Using groups simplifies the administration of multiple SFTPGo users: you can assign settings once to a group, instead of multiple times to each individual user.

SFTPGo supports the following types of groups:

  • primary groups
  • secondary groups
  • membership groups

A user can be a member of a primary group and many secondary and membership groups. Depending on the group type, the settings are inherited differently, more details here.

⚠️ SFTPGo groups are completely unrelated to system groups. Therefore, it is not necessary to add Linux/Windows groups to use SFTPGo groups.

Usage example

Suppose you have the following requirements:

  • each user must be restricted to a local home directory containing the username as last element of the path, for example /srv/sftpgo/data/<username>
  • for each user, the maximum upload size for a single file must be limited to 1GB
  • each user must have an S3 virtual folder available in the path /s3<username> and each user can only access a specified "prefix" of the S3 bucket. It must not be able to access other users' files
  • each user must have an S3 virtual folder available in the path /shared. This is a folder shared with other users
  • a group of users can only download and list contents in the /shared path while another group of users have full access

We can easily meet these requirements by defining two groups.

From the SFTPGo WebAdmin UI, click on Folders and then on the + icon.

Create a folder named S3private. Set the storage to AWS S3 (Compatible) and fill the required parameters:

  • bucket name
  • region
  • credentials: access key and access secret

S3Private folder

The important part is the Key Prefix, set it to users/%username%/

S3Private Key Prefix

The placeholder %username% will be replaced with the associated username.

Create another folder named S3shared with the same settings as S3private but this time set the Key Prefix to shared/. The Key Prefix has no placeholder, so the folder will operate on a static path that won't change based on the associated user.

Now click on Groups and then on the + icon and add a group named Primary.

Set the Home Dir to /srv/sftpgo/data/%username%.

Add group

As before, the placeholder %username% will be replaced with the associated username.

Add the two virtual folders to this group and set the Max file upload size to 1GB.

Primary group settings

Add a new group and name it SharedReadOnly, in the ACLs section set the permission on the /shared path so that read only access is granted.

Read-only share

The group setup is now complete. We can now create our users and set the primary group to Primary. For the users who need read-only access to the /shared path we also have to set SharedReadOnly as a secondary group.

You can now login with any SFTP client like FileZilla, WinSCP etc. and verify that the requirements are met.

Simplify user page

The add/update user page has many configuration options and can be intimidating for some administrators. We can hide most of the settings and automatically add groups to newly created users. This way the hidden settings are inherited from the automatically assigned groups and therefore administrators can add new users simply by setting the username and credentials.

Click on Admins and then on the + icon and add an admin named simply. In the Groups for users section set Primary as primary group and SharedReadOnly as seconday group. In the User page preferences section hide all the sections.

Simplified admin

Log in using the newly created administrator and try to add a new user. The user page is simplified as you can see in the following screen.

Simplified user add

Configuration parameters

Until now we used the default configuration, to change the global service parameters you have to edit the configuration file, or set appropriate environment variables, and restart SFTPGo to apply the changes.

A full explanation of all configuration methods can be found here, we explore some common use cases. Please keep in mind that SFTPGo can also be configured via environment variables, this is very convenient if you are using Docker.

The default configuration file is sftpgo.json and it can be found within the /etc/sftpgo directory if you installed from Linux distro packages. On Windows the configuration file can be found within the {commonappdata}\SFTPGo directory where {commonappdata} is typically C:\ProgramData. SFTPGo also supports reading from TOML and YAML configuration files.

The configuration file can change between different versions and merging your custom settings with the default configuration file, after updating SFTPGo, may be time-consuming. For this reason we suggest to set your custom settings using environment variables. If you install SFTPGo on Linux using the official deb/rpm packages you can set your custom environment variables in the file /etc/sftpgo/sftpgo.env. SFTPGo also reads files inside the env.d directory relative to config dir (/etc/sftpgo/env.d on Linux and {commonappdata}\SFTPGo\env.d on Windows) and then exports the valid variables into environment variables if they are not already set. Of course you can also set environment variables with the method provided by the operating system of your choice.

The following snippets assume your are running SFTPGo on Linux but they can be easily adapted for other operating systems.

Use PostgreSQL data provider

Create a PostgreSQL database named sftpgo and a PostgreSQL user with the correct permissions, for example using the psql CLI.

sudo -i -u postgres psql
CREATE DATABASE "sftpgo" WITH ENCODING='UTF8' CONNECTION LIMIT=-1;
create user "sftpgo" with encrypted password 'your password here';
grant all privileges on database "sftpgo" to "sftpgo";
\q

You can open the SFTPGo configuration file, search for the data_provider section and change it as follow.

  "data_provider": {
    "driver": "postgresql",
    "name": "sftpgo",
    "host": "127.0.0.1",
    "port": 5432,
    "username": "sftpgo",
    "password": "your password here",
    ...
}

Alternatively (recommended), you can use environment variables by creating the file /etc/sftpgo/env.d/postgresql.env with the following content.

SFTPGO_DATA_PROVIDER__DRIVER=postgresql
SFTPGO_DATA_PROVIDER__NAME=sftpgo
SFTPGO_DATA_PROVIDER__HOST=127.0.0.1
SFTPGO_DATA_PROVIDER__PORT=5432
SFTPGO_DATA_PROVIDER__USERNAME=sftpgo
SFTPGO_DATA_PROVIDER__PASSWORD=your password here

Confirm that the database connection works by initializing the data provider.

$ sudo su - sftpgo -s /bin/bash -c 'sftpgo initprovider -c /etc/sftpgo'
2021-05-19T22:21:54.000 INF Initializing provider: "postgresql" config file: "/etc/sftpgo/sftpgo.json"
2021-05-19T22:21:54.000 INF updating database schema version: 8 -> 9
2021-05-19T22:21:54.000 INF Data provider successfully initialized/updated

Ensure that SFTPGo starts after the database service.

sudo systemctl edit sftpgo.service

And override the unit definition with the following snippet.

[Unit]
After=postgresql.service

Restart SFTPGo to apply the changes.

Use MySQL/MariaDB data provider

Create a MySQL database named sftpgo and a MySQL user with the correct permissions, for example using the mysql CLI.

$ mysql -u root
MariaDB [(none)]> CREATE DATABASE sftpgo CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
Query OK, 1 row affected (0.000 sec)

MariaDB [(none)]> grant all privileges on sftpgo.* to sftpgo@localhost identified by 'your password here';
Query OK, 0 rows affected (0.027 sec)

MariaDB [(none)]> quit
Bye

You can open the SFTPGo configuration file, search for the data_provider section and change it as follow.

  "data_provider": {
    "driver": "mysql",
    "name": "sftpgo",
    "host": "127.0.0.1",
    "port": 3306,
    "username": "sftpgo",
    "password": "your password here",
    ...
}

Alternatively (recommended), you can use environment variables by creating the file /etc/sftpgo/env.d/mysql.env with the following content.

SFTPGO_DATA_PROVIDER__DRIVER=mysql
SFTPGO_DATA_PROVIDER__NAME=sftpgo
SFTPGO_DATA_PROVIDER__HOST=127.0.0.1
SFTPGO_DATA_PROVIDER__PORT=3306
SFTPGO_DATA_PROVIDER__USERNAME=sftpgo
SFTPGO_DATA_PROVIDER__PASSWORD=your password here

Confirm that the database connection works by initializing the data provider.

$ sudo su - sftpgo -s /bin/bash -c 'sftpgo initprovider -c /etc/sftpgo'
2021-05-19T22:29:30.000 INF Initializing provider: "mysql" config file: "/etc/sftpgo/sftpgo.json"
2021-05-19T22:29:30.000 INF updating database schema version: 8 -> 9
2021-05-19T22:29:30.000 INF Data provider successfully initialized/updated

Ensure that SFTPGo starts after the database service.

sudo systemctl edit sftpgo.service

And override the unit definition with the following snippet.

[Unit]
After=mariadb.service

Restart SFTPGo to apply the changes.

Use CockroachDB data provider

We suppose you have installed CockroachDB this way:

sudo su
export CRDB_VERSION=22.1.8 # set the latest available version here
wget -qO- https://binaries.cockroachdb.com/cockroach-v${CRDB_VERSION}.linux-amd64.tgz | tar xvz
cp -i cockroach-v${CRDB_VERSION}.linux-amd64/cockroach /usr/local/bin/
mkdir -p /usr/local/lib/cockroach
cp -i cockroach-v${CRDB_VERSION}.linux-amd64/lib/libgeos.so /usr/local/lib/cockroach/
cp -i cockroach-v${CRDB_VERSION}.linux-amd64/lib/libgeos_c.so /usr/local/lib/cockroach/
mkdir /var/lib/cockroach
chown sftpgo:sftpgo /var/lib/cockroach
mkdir -p /etc/cockroach/{certs,ca}
chmod 700 /etc/cockroach/ca
/usr/local/bin/cockroach cert create-ca --certs-dir=/etc/cockroach/certs --ca-key=/etc/cockroach/ca/ca.key
/usr/local/bin/cockroach cert create-node localhost $(hostname) --certs-dir=/etc/cockroach/certs --ca-key=/etc/cockroach/ca/ca.key
/usr/local/bin/cockroach cert create-client root --certs-dir=/etc/cockroach/certs --ca-key=/etc/cockroach/ca/ca.key
chown -R sftpgo:sftpgo /etc/cockroach/certs
exit

and you are running it using a systemd unit like this one:

[Unit]
Description=Cockroach Database single node
Requires=network.target
[Service]
Type=notify
WorkingDirectory=/var/lib/cockroach
ExecStart=/usr/local/bin/cockroach start-single-node --certs-dir=/etc/cockroach/certs --http-addr 127.0.0.1:8888 --listen-addr 127.0.0.1:26257 --cache=.25 --max-sql-memory=.25 --store=path=/var/lib/cockroach
TimeoutStopSec=60
Restart=always
RestartSec=10
StandardOutput=journal
StandardError=journal
User=sftpgo
[Install]
WantedBy=default.target

Create a CockroachDB database named sftpgo.

$ sudo /usr/local/bin/cockroach sql --certs-dir=/etc/cockroach/certs -e 'create database "sftpgo"'
CREATE DATABASE

Time: 13ms

You can open the SFTPGo configuration file, search for the data_provider section and change it as follow.

  "data_provider": {
    "driver": "cockroachdb",
    "name": "sftpgo",
    "host": "localhost",
    "port": 26257,
    "username": "root",
    "password": "",
    "sslmode": 3,
    "root_cert": "/etc/cockroach/certs/ca.crt",
    "client_cert": "/etc/cockroach/certs/client.root.crt",
    "client_key": "/etc/cockroach/certs/client.root.key",
    ...
}

Alternatively (recommended), you can use environment variables by creating the file /etc/sftpgo/env.d/cockroachdb.env with the following content.

SFTPGO_DATA_PROVIDER__DRIVER=cockroachdb
SFTPGO_DATA_PROVIDER__NAME=sftpgo
SFTPGO_DATA_PROVIDER__HOST=localhost
SFTPGO_DATA_PROVIDER__PORT=26257
SFTPGO_DATA_PROVIDER__USERNAME=root
SFTPGO_DATA_PROVIDER__SSLMODE=3
SFTPGO_DATA_PROVIDER__ROOT_CERT="/etc/cockroach/certs/ca.crt"
SFTPGO_DATA_PROVIDER__CLIENT_CERT="/etc/cockroach/certs/client.root.crt"
SFTPGO_DATA_PROVIDER__CLIENT_KEY="/etc/cockroach/certs/client.root.key"

Confirm that the database connection works by initializing the data provider.

$ sudo su - sftpgo -s /bin/bash -c 'sftpgo initprovider -c /etc/sftpgo'
2022-06-02T14:54:04.510 INF Initializing provider: "cockroachdb" config file: "/etc/sftpgo/sftpgo.json"
2022-06-02T14:54:04.554 INF creating initial database schema, version 15
2022-06-02T14:54:04.698 INF updating database schema version: 15 -> 16
2022-06-02T14:54:07.093 INF updating database schema version: 16 -> 17
2022-06-02T14:54:07.672 INF updating database schema version: 17 -> 18
2022-06-02T14:54:07.699 INF updating database schema version: 18 -> 19
2022-06-02T14:54:07.721 INF Data provider successfully initialized/updated

Ensure that SFTPGo starts after the database service.

sudo systemctl edit sftpgo.service

And override the unit definition with the following snippet.

[Unit]
After=cockroachdb.service

Restart SFTPGo to apply the changes.

Enable FTP service

You can set the configuration options to enable the FTP service by opening the SFTPGo configuration file, looking for the ftpd section and editing it as follows.

  "ftpd": {
    "bindings": [
      {
        "port": 2121,
        "address": "",
        "apply_proxy_config": true,
        "tls_mode": 0,
        "certificate_file": "",
        "certificate_key_file": "",
        "min_tls_version": 12,
        "force_passive_ip": "",
        "passive_ip_overrides": [],
        "client_auth_type": 0,
        "tls_cipher_suites": [],
        "passive_connections_security": 0,
        "active_connections_security": 0,
        "debug": false
      }
    ],
    "banner": "",
    "banner_file": "",
    "active_transfers_port_non_20": true,
    "passive_port_range": {
      "start": 50000,
      "end": 50100
    },
    ...
  }

Alternatively (recommended), you can use environment variables by creating the file /etc/sftpgo/env.d/ftpd.env with the following content.

SFTPGO_FTPD__BINDINGS__0__PORT=2121

Restart SFTPGo to apply the changes. The FTP service is now available on port 2121.

You can also configure the passive ports range (50000-50100 by default), these ports must be reachable for passive FTP to work. If your FTP server is on the private network side of a NAT configuration you have to set force_passive_ip to your external IP address. You may also need to open the passive port range on your firewall.

It is recommended that you provide a certificate and key file to allow FTP over TLS. You should prefer SFTP to FTP even if you configure TLS, please don't blindly enable the old FTP protocol.

Enable WebDAV service

You can set the configuration options to enable the FTP service by opening the SFTPGo configuration file, looking for the webdavd section and editing it as follows.

  "webdavd": {
    "bindings": [
      {
        "port": 10080,
        "address": "",
        "enable_https": false,
        "certificate_file": "",
        "certificate_key_file": "",
        "min_tls_version": 12,
        "client_auth_type": 0,
        "tls_cipher_suites": [],
        "prefix": "",
        "proxy_allowed": [],
        "client_ip_proxy_header": "",
        "client_ip_header_depth": 0,
        "disable_www_auth_header": false
      }
    ],
    ...
  }

Alternatively (recommended), you can use environment variables by creating the file /etc/sftpgo/env.d/webdavd.env with the following content.

SFTPGO_WEBDAVD__BINDINGS__0__PORT=10080

Restart SFTPGo to apply the changes. The WebDAV service is now available on port 10080. It is recommended that you provide a certificate and key file to allow WebDAV over https.