v0.14.0

Add aws credentials into accepter and requester providers @heruscode (#43)

what

• Adds AWS credentials variables into providers ( access key id, secret access key, session token)

why

• I have a use case of using Hashicorp Vault to fetch AWS credentials, i need a way to pass these fetched credentials into the module.

v0.13.1

🚀 Enhancements

Add optional profile for accepter and requester @dtw45 (#38)

what

• Allow user to pass in optional profile to be used when assuming the specified role.

why

• As stated in the issue, if you normally configure profile in your aws provider block, plan will fail with the following message. This is because the default credentials don't have permission to assume the specified role.

Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.


Error: error configuring Terraform AWS Provider: IAM Role (arn:aws:iam::XXXX:role/vpc-peering-role) cannot be assumed.

There are a number of possible causes of this - the most common are:
  * The credentials used in order to assume the role are invalid
  * The credentials do not have appropriate permission to assume the role
  * The role ARN is not valid

Error: NoCredentialProviders: no valid providers in chain. Deprecated.
	For verbose messaging see aws.Config.CredentialsChainVerboseErrors

Also, there was a question of whether or not passing in an empty string would be okay for the AWS provider and it seems to work fine.

references

closes #7

v0.13.0

fix: acceptor/requestor rout table ids indexing @hche608 (#40)

changed from ceil to floor

what

• when acceptor vpc has two cidr ranges, this will not work, the range of index starts from 0 to a number, not 1 to a number

why

• fix a bug

v0.12.4

🤖 Automatic Updates

context.tf updated to v0.24.1, minimum required Terraform version bumped to 0.13.0 when needed, readme updated @maximmi (#42)

what

• update context.tf to v0.24.1
• minimum required Terraform version bumped to 0.13.0
• readme updated, Bridgecrew compliance badges added

why

• It allows for setting the letter case of tag names and labels, back compatibility with context v0.22.0 and below
• we have dropped support for Terraform 0.12
• To be able see and fix the recommendations from Bridgecrew so we can position our modules as standards compliant

v0.12.3

🤖 Automatic Updates

Update context.tf @cloudpossebot (#37)

what

This is an auto-generated PR that updates the context.tf file to the latest version from cloudposse/terraform-null-label

why

To support all the features of the context interface.

v0.12.2

🤖 Automatic Updates

Update Terraform cloudposse/label/null to v0.24.1 @renovate (#41)

This PR contains the following updates:

Package	Type	Update	Change
cloudposse/label/null (source)	terraform	patch	0.24.0 -> 0.24.1

---

Release Notes

cloudposse/terraform-null-label

v0.24.1

Compare Source

Allow control of letter case of outputs @​SweetOps (#​107)

You now have control over the letter case of generated tag names and supplied labels, which means you also have control over the letter case of the ultimate id.

Labels are the elements you can include in label_order, namely namespace, environment, stage, name, and attributes. For every non-empty label, a corresponding tag name is generated. For namespace, environment, stage, the output is the formatted, normalized input. (By "normalized" we mean that it goes through regex_replace_chars.), For attributes, which is a list, each element is normalized, duplicates are removed, and the resulting list is converted to a string by joining the elements with the delimiter (defaults to hyphen). For name, which is special, the output is the same as id, which is the joining of the labels in the order specified by label_order and separated by delimiter.

• You can set label_key_case to one of upper, lower, or title, which will result in generated tag names in the corresponding case: NAME, name, or Name. For backwards compatibility, title is the default
• You can set label_value_case to one of upper, lower, title, or none, which will result in output label values in the corresponding case (with none meaning no case conversion of any kind will be done, though the labels will still be subject to regex_replace_chars). The case converted labels will show up not just in the module output of the labels themselves, but also in the tag values and in the id string.

You can look at the test cases in examples/complete and the expected results in test/src/examples_complete_test.go to see examples of how this is supposed to work.

One interesting example is that you can create ids in Pascal case by setting label_value_case = "title" and delimiter = "".

Include updates to exports/context.tf @​Nuru (#​122 and #​123)

##### what - Include updates to `exports/context.tf` - Update README with features and compatibilty - Add validation for `id_length_limit` ##### why - The `exports/context.tf` is what gets distributed and needs to be in sync - Replace outdated information - Was not validated earlier because validators are not supported in TF 0.12 but now we are dropping support for TF 0.12 and so we can add validators

Restore backward compatibility with v0.22.1 and earlier @​Nuru (#​121)

##### what - Restore backward compatibility with v0.22.1 and earlier - Allow setting of `label_key_case` and `label_value_case` by vars, not just by context attributes. ##### why - Allow interoperability of old and new modules - Normally, root modules make settings via individual variables, not by setting an entire context block.

Incorporates and closes #​120

v0.12.1

🤖 Automatic Updates

Update Terraform cloudposse/label/null to v0.24.0 @renovate (#36)

This PR contains the following updates:

Package	Type	Update	Change
cloudposse/label/null (source)	terraform	minor	0.22.1 -> 0.24.0

---

Release Notes

cloudposse/terraform-null-label

v0.24.0

Compare Source

Restore backward compatibility with v0.22.1 and earlier @​Nuru (#​121)

##### what - Restore backward compatibility with v0.22.1 and earlier - Allow setting of `label_key_case` and `label_value_case` by vars, not just by context attributes. ##### why - Allow interoperability of old and new modules - Normally, root modules make settings via individual variables, not by setting an entire context block.

Incorporates and closes #​120

Allow control of letter case of outputs @​SweetOps (#​107)

You now have control over the letter case of generated tag names and supplied labels, which means you also have control over the letter case of the ultimate id.

Labels are the elements you can include in label_order, namely namespace, environment, stage, name, and attributes. For every non-empty label, a corresponding tag name is generated. For namespace, environment, stage, the output is the formatted, normalized input. (By "normalized" we mean that it goes through regex_replace_chars.), For attributes, which is a list, each element is normalized, duplicates are removed, and the resulting list is converted to a string by joining the elements with the delimiter (defaults to hyphen). For name, which is special, the output is the same as id, which is the joining of the labels in the order specified by label_order and separated by delimiter.

• You can set label_key_case to one of upper, lower, or title, which will result in generated tag names in the corresponding case: NAME, name, or Name. For backwards compatibility, title is the default
• You can set label_value_case to one of upper, lower, title, or none, which will result in output label values in the corresponding case (with none meaning no case conversion of any kind will be done, though the labels will still be subject to regex_replace_chars). The case converted labels will show up not just in the module output of the labels themselves, but also in the tag values and in the id string.

You can look at the test cases in examples/complete and the expected results in test/src/examples_complete_test.go to see examples of how this is supposed to work.

One interesting example is that you can create ids in Pascal case by setting label_value_case = "title" and delimiter = "".

v0.23.0

Compare Source

• feat: add support for setting letter case of context tags @​SweetOps (#​107)

With this release, you gain control over the letter case of generated tag names and supplied labels, which means you also have control over the letter case of the ultimate id.

Labels are the elements you can include in label_order, namely namespace, environment, stage, name, and attributes. For every non-empty label, a corresponding tag name is generated. For namespace, environment, stage, the output is the formatted, normalized input. (By "normalized" we mean that it goes through regex_replace_chars.), For attributes, which is a list, each element is normalized, duplicates are removed, and the resulting list is converted to a string by joining the elements with the delimiter (defaults to hyphen). For name, which is special, the output is the same as id, which is the joining of the labels in the order specified by label_order and separated by delimiter.

• You can set label_key_case to one of upper, lower, or title, which will result in generated tag names in the corresponding case: NAME, name, or Name. For backwards compatibility, title is the default
• You can set label_value_case to one of upper, lower, title, or none, which will result in output label values in the corresponding case (with none meaning no case conversion of any kind will be done, though the labels will still be subject to regex_replace_chars). The case converted labels will show up not just in the module output of the labels themselves, but also in the tag values and in the id string.

You can look at the test cases in examples/complete and the expected results in test/src/examples_complete_test.go to see examples of how this is supposed to work.

One interesting example is that you can create ids in Pascal case by setting label_value_case = "title" and delimiter = "".

v0.12.0

minimum required Terraform version bumped to 0.13.0, context.tf updated, readme updated @maximmi (#39)

what

• update context.tf to v0.23.0
• minimum required Terraform version bumped to 0.13.0
• readme updated, Bridgecrew compliance badges added

why

• It allows for setting the letter case of tag names and labels
• we have dropped support for Terraform 0.12
• To be able see and fix the recommendations from Bridgecrew so we can position our modules as standards compliant

v0.11.3

🚀 Enhancements

Fix typo in README.md @Zaargh (#34)

fix link to terraform-aws-vpc-peering - it was pointing to terraform-aws-vpc

v0.11.2

🤖 Automatic Updates

Update Terraform cloudposse/label/null to v0.22.1 @renovate (#33)

This PR contains the following updates:

Package	Type	Update	Change
cloudposse/label/null (source)	terraform	minor	0.21.0 -> 0.22.1

---

Release Notes

cloudposse/terraform-null-label

v0.22.1

Compare Source

Add var.attributes to end of context.attributes, not vice versa @​Nuru (#​114)

#### what - Add `var.attributes` to end of `context.attributes`, not vice versa - Update to current workflows (with some exceptions) #### why - Modules should append to attributes passed in, not insert themselves ahead of others - New features, like auto-format (but holding back some, because this is a special module) #### references - closes #​113 - closes #​108

v0.22.0

Compare Source

Breaking change: This release updates minimum Terraform version requirement to 0.12.26

Convert context.tf to registry reference @​Nuru (#​110)

##### what - Convert `context.tf` to use registry reference - Update version requirement to `>= 0.12.26` - Switch auto-publish to draft mode ##### why - New standard way to reference modules - Minimum version that supports registry references - Ensure that version numbers are set manually and match what is in `context.tf`