Ai-BR100

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_CROSS_COMPILER_PATH="/home/foo/.buildroot-gcc342/bin"
ASIC_BOARD=y
# RT2880_ASIC_BOARD is not set
# RT3350_ASIC_BOARD is not set
# RT3052_ASIC_BOARD is not set
# RT3352_ASIC_BOARD is not set
# RT3883_ASIC_BOARD is not set
# RT5350_ASIC_BOARD is not set
# RT6855A_ASIC_BOARD is not set
MT7620_ASIC_BOARD=y
MT7620_MP=y
P5_MAC_TO_NONE_MODE=y
# P5_MAC_TO_PHY_MODE is not set
# P5_RGMII_TO_MAC_MODE is not set
# P5_MII_TO_MAC_MODE is not set
# P5_RMII_TO_MAC_MODE is not set
P4_MAC_TO_NONE_MODE=y
# P4_MAC_TO_PHY_MODE is not set
# P4_RGMII_TO_MAC_MODE is not set
# P4_MII_TO_MAC_MODE is not set
# P4_RMII_TO_MAC_MODE is not set
# ON_BOARD_NAND_FLASH_COMPONENT is not set
ON_BOARD_SPI_FLASH_COMPONENT=y
# ON_BOARD_SDR is not set
# ON_BOARD_DDR1 is not set
ON_BOARD_DDR2=y
# ON_BOARD_256M_DRAM_COMPONENT is not set
ON_BOARD_512M_DRAM_COMPONENT=y
# ON_BOARD_1024M_DRAM_COMPONENT is not set
# ON_BOARD_2048M_DRAM_COMPONENT is not set
# ON_BOARD_DDR_WIDTH_8 is not set
ON_BOARD_DDR_WIDTH_16=y
ON_BOARD_16BIT_DRAM_BUS=y
PDMA_NEW=y
RX_SCATTER_GATTER_DMA=y
# UBOOT_RAM is not set
UBOOT_ROM=y
# CPLL_NONE is not set
# CPLL_FROM_480MHZ is not set
# CPLL_FROM_XTAL is not set
CPLL_FROM_CONF=y
# MT7620_PLL_MULTI_RATIO_24 is not set
# MT7620_PLL_MULTI_RATIO_25 is not set
# MT7620_PLL_MULTI_RATIO_26 is not set
# MT7620_PLL_MULTI_RATIO_27 is not set
# MT7620_PLL_MULTI_RATIO_28 is not set
MT7620_PLL_MULTI_RATIO_29=y
# MT7620_PLL_MULTI_RATIO_30 is not set
CPLL_MULTI_RATIO_CFG=5
MT7620_PLL_DIV_RATIO_2=y
# MT7620_PLL_DIV_RATIO_3 is not set
# MT7620_PLL_DIV_RATIO_4 is not set
CPLL_DIV_RATIO_CFG=0
CPLL_SSC_CFG=0x7
# DUAL_IMAGE_SUPPORT is not set
LAN_WAN_PARTITION=y
RALINK_DEMO_BOARD_PVLAN=y
# RALINK_EV_BOARD_PVLAN is not set
TEXT_BASE=0xBC000000