Yaml

substitutions:
  name: "4heat"
  friendly_name: 4heat

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false
  project:
    name: catdognaus.NG21
    version: '1.0'

esp8266:
  board: d1_mini

# Enable logging
logger:
  baud_rate: 0

# Enable Home Assistant API
api:

# Allow Over-The-Air updates
ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

# In combination with the `ap` this allows the user
# to provision wifi credentials to the device via WiFi AP.
captive_portal:

external_components:
  source: github://leoshusar/4heat-esphome

uart:
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 9600

fourheat:

switch:
  - id: state_switch
    name: State
    platform: fourheat
    restore_mode: DISABLED
    datapoint: J30001
    on_datapoint: J30253
    off_datapoint: J30254
    on_data: '1'
    off_data: '1'
    parser: |-
      auto size = data.size();
      return
        data[size - 1] != '0' ||
        data[size - 2] != '0';

    # Night mode stuff starts

  - platform: fourheat
    id: Cleaning_Motor_Off
    datapoint: B20701
    on_data: '1'
    off_data: '0'
    parser: return data[data.size() - 1] != '0';

  - platform: template
    name: Enable night mode menu
    lambda: |-
      if (id(Cleaning_Motor_Off).state) {
        return true; // if night mode enabled, switch indicates ON
      } else {
        return false; // else OFF
      }
    turn_on_action:
      - switch.turn_on: Cleaning_Motor_Off

    turn_off_action:
      - switch.turn_off: Cleaning_Motor_Off

       # Night mode stuff ends 

text_sensor:
  - id: state
    name: State
    platform: fourheat
    datapoint: J30001
    options:
      0: "OFF"
      1: "Check Up"
      2: "Ignition"
      3: "Stabilization"
      4: "Ignition"
      5: "Run"
      6: "Modulation"
      7: "Extinguishing"
      8: "Safety"
      9: "Block"
      10: "Recover Ignition"
      11: "Standby"
      30: "Ignition"
      31: "Ignition"
      32: "Ignition"
      33: "Ignition"
      34: "Ignition"

  - id: error
    name: Error
    platform: fourheat
    datapoint: J30002
    options:
      0: "No"
      1: "Safety Thermostat HV1: signalled also in case of Stove OFF"
      2: "Safety PressureSwitch HV2: signalled with Combustion Fan ON"
      3: "Extinguishing for Exhausting Temperature lowering"
      4: "Extinguishing for water over Temperature"
      5: "Extinguishing for Exhausting over Temperature"
      6: "unknown"
      7: "Encoder Error: No Encoder Signal (in case of P25=1 or 2)"
      8: "Encoder Error: Combustion Fan regulation failed (in case of P25=1 or 2)"
      9: "Low pressure in to the Boiler"
      10: "High pressure in to the Boiler Error"
      11: "DAY and TIME not correct due to prolonged absence of Power Supply"
      12: "Failed Ignition"
      13: "Ignition"
      14: "Ignition"
      15: "Lack of Voltage Supply"
      16: "RS485 communication problem. Touch display does not communicate with the oven."
      17: "Flowmeter (FCS) error. Cancel and try to restart"
      18: "Lack of Voltage Supply"
      23: "One of the temperature sensors failed. Cancel and try to restart."
      25: "Ash grate cleaning blocked. Remove obstruction, restart"
      39: "Flowmeter (FCS) fail. Cancel and try to restart"
      41: "Flowmeter data error (Required airflow not reached). Cancel and try to restart"
      42: "Max airflow exceeded. Cancel and try to restart"
      44: "Shutdown due to front door opening. Check and close."

  - id: combustion_power
    name: Combustion power
    platform: fourheat
    datapoint: J30011
    icon: "mdi:heating-coil"
    options:
      1: "P1"
      2: "P2"
      3: "P3"
      4: "P4"
      5: "P5"
      6: "Cleaning"
      7: "Standby"
      8: "Ignition 2"
      9: "Modulation"
      10: "Ignition P0"
      11: "MAX P"
      12: "Extinguish"
      100: "Off"
      110: "Off"
      120: "Pmax Test"
      255: "Ignition"
      0: "Stabilizing"

button:
  - id: clear_error
    name: Clear error
    platform: fourheat
    datapoint: J30255


select:
  - id: power
    name: Power
    platform: fourheat
    datapoint: B20364
    options:
      1: "P1"
      2: "P2"
      3: "P3"
      4: "P4"
      5: "P5"
      6: "Auto"
#  - id: combi
#    name: Combi Management
#    platform: fourheat
#    datapoint: B20379
#    options:
#      0: "Pellet"
#      1: "Wood"
#      2: "Wood-Pellet"
#      3: "Combi 1"
#      4: "Combi 2"
    

binary_sensor:
  - id: stove_offline
    name: Stove offline
    platform: fourheat
    type: module_offline

  - id: room_thermostat_state
    name: Room thermostat state
    platform: fourheat
    datapoint: J40007
    parser: return data[data.size() - 3] == '0';


sensor:
  - id: exhaust_temperature
    name: Exhaust temperature
    platform: fourheat
    datapoint: J30005
    device_class: temperature
    unit_of_measurement: °C

  - id: buffer_temperature
    name: Buffer temperature
    platform: fourheat
    datapoint: J30012
    device_class: temperature
    unit_of_measurement: °C

  - id: boiler_temperature
    name: Boiler temperature
    platform: fourheat
    datapoint: J30017
    device_class: temperature
    unit_of_measurement: °C

  - id: water_pressure
    name: Water pressure
    platform: fourheat
    datapoint: J30020
    device_class: pressure
    unit_of_measurement: mbar

  - id: airflow
    name: Airflow
    icon: "mdi:air-filter"
    platform: fourheat
    datapoint: J30026
    unit_of_measurement: cm/s

  - id: comb_fan_speed
    name: Combustion Fan Speed
    icon: "mdi:fan"
    platform: fourheat
    datapoint: J30025
    unit_of_measurement: rpm

  - id: room_temperature
    name: Room temperature
    platform: fourheat
    datapoint: J30006
    device_class: temperature
    unit_of_measurement: °C

  - id: ambient_fan_voltage
    name: Ambient Fan Voltage
    platform: fourheat
    datapoint: J30009
    device_class: voltage
    unit_of_measurement: V

number:
  - id: boiler_target_temperature
    name: Boiler target temperature
    platform: fourheat
    datapoint: B20199
    device_class: temperature
    unit_of_measurement: °C
    min_value: 5
    max_value: 110

  - id: buffer_thermostat_threshold
    name: Buffer thermostat threshold
    platform: fourheat
    datapoint: B20241
    device_class: temperature
    unit_of_measurement: °C
    min_value: 1
    max_value: 20

  - id: buffer_target_temperature
    name: Buffer target temperature
    platform: fourheat
    datapoint: B20225
    device_class: temperature
    unit_of_measurement: °C
    min_value: 20
    max_value: 110