mram2

\mainpage Main Page

---

MRAM 2 click

MRAM 2 Click is a compact add-on board for applications that must store and retrieve data and programs quickly using a small number of pins.

click Product page

---

Click library

• Author : MikroE Team
• Date : Sep 2020.
• Type : SPI type

Software Support

We provide a library for the Mram2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Mram2 Click driver.

Standard key functions :

• mram2_cfg_setup Config Object Initialization function.

void mram2_cfg_setup ( mram2_cfg_t *cfg ); 

• mram2_init Initialization function.

err_t mram2_init ( mram2_t *ctx, mram2_cfg_t *cfg );

Example key functions :

• mram2_wren Write Enable function

void mram2_wren ( mram2_t *ctx );

• mram2_read Read Data Bytes function

void mram2_read ( mram2_t *ctx, uint32_t mem_adr, uint8_t *rd_data, uint8_t n_bytes );

• mram2_write Write Data Bytes function

void mram2_write ( mram2_t *ctx, uint32_t mem_adr, uint8_t *wr_data, uint8_t n_bytes );

Examples Description

This example demonstrates the use of MRAM 2 Click board.

The demo application is composed of two sections :

Application Init

Initializes the driver, sets the write protect and disables the hold signal.

void application_init ( void )
{
    log_cfg_t log_cfg;
    mram2_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    mram2_cfg_setup( &cfg );
    MRAM2_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    mram2_init( &mram2, &cfg );

    log_printf( &logger, "------------------- \r\n" );
    log_printf( &logger, "   MRAM 2 Click     \r\n" );
    log_printf( &logger, "------------------- \r\n" );
    mram2_write_protect( &mram2, MRAM2_WP_ENABLE );
    mram2_hold( &mram2, MRAM2_HLD_DISABLE );
    log_printf( &logger, "   Initialized      \r\n" );
    log_printf( &logger, "------------------- \r\n" );
    Delay_ms( 100 );
}
  

Application Task

Writes "MikroE" into the first 6 memory locations, and then reads it back and displays it to the USB UART approximately every 5 seconds.

void application_task ( void )
{
    mram2_wren( &mram2 );
    log_printf( &logger, "Write enabled!\r\n" );
    Delay_ms( 100 );
    log_printf( &logger, "Writing \"%s\" to memory...\r\n", val_in );
    mram2_write( &mram2, 0x000000, &val_in[ 0 ], 6 );
    Delay_ms( 100 );
    mram2_wrdi ( &mram2 );
    log_printf( &logger, "Write disabled!\r\n" );
    Delay_ms( 100 );
    mram2_read ( &mram2, 0x000000, &val_out[ 0 ], 6 );
    log_printf( &logger, "Read data : %s\r\n", val_out );
    
    log_printf( &logger, "-------------------\r\n" );
    Delay_ms( 5000 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Mram2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---